Solvent for industrial ink jet printers (CIJ-printers) Paul Leibinger Inc Buell Dr. Ste.B.

Transcription

1 SAFTY DATA SHEET Acc to Regulation (EU) 1907/2006 (REACH) 1. IDENTIFICATION OF PRODUCT AND COMPANY Revised: June 5, 2015 Product name : , Solvent for INK Use of the substance/preparation: Supplier : Solvent for industrial ink jet printers (CIJ-printers) Paul Leibinger Inc Buell Dr. Ste.B East Troy, WI United States Emergency phone (for Transport & Environment) : Chemtrec (24h service) 2. COMPOSITION / INFORMATION ON INGREDIENTS Classification F; R11 Xi; R36 Danger R-phrases 11 Highly flammable. 36 Irritating to eyes. 66 Repeated exposure may cause skin dryness or cracking. 67 Vapors may cause drowsiness and dizziness. Special hazards information for humans and environment Highly flammable. In use, may form flammable/explosive vapor-air mixture. 3. HAZARDS IDENTIFICATION Hazardous ingredients CAS-Nr. EC-No. Component Weight -% R-phrases Butanone (MEK) >95 F R11 Xi R36, 66, FIRST AID MEASURES General information Remove contaminated soaked clothing immediately. In the event of persistent symptoms receive medical treatment. Take affected person into fresh air. Take away from danger area and lay down affected person. In case of inhalation Ensure of fresh air. In the event of symptoms refer for medical treatment. In case of skin contact In case of contact with skin wash off with soap and water. Consult a doctor if skin irritation persists. In case of eye contact In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Rev.: June 5, 2015 Page 1/5 Solvent

2 In case of ingestion Refer to medical treatment. Physician's information / possible symptoms In case of inhalation of plenty of solvent-containing fumes the following symptoms may occur: Unconsciousness Depression of central nervous system Confusion Physician's information / possible dangers In case of severe poisoning depressions of central nervous system, hypotension, bradycardia and hypothermia may occur. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Alcohol-resistant foam Dry powder Carbon dioxide Water spray jet Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases Carbon monoxide (CO) Carbon dioxide (CO2) Special protective equipment for fire-fighters Use breathing apparatus with independent air supply. Additional information Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Ensure adequate ventilation. Use personal protective clothing. Keep away sources of ignition. Environmental precautions Do not discharge into the drains or bodies of water. Do not seep away spilled product into ground or body of water. Do not discharge into the subsoil/soil. Methods for cleaning up Take up with absorbent material (e.g. sand, acid binder, general-purpose binder, sawdust). Additional Information Information for disposal see chapter HANDLING AND STORAGE Advice on safe handling Take measures against electrostatically charging. Provide good room ventilation even at ground level (vapors are heavier than air). Take the usual precautions when handling with chemicals. Advice on protection against fire and explosion Keep away from sources of ignition - No smoking The product is easily combustible. Take precautionary measures against static discharges. Formation of explosive gas mixtures in air. Rev.: June 5, 2015 Page 2/5 Solvent

3 Requirements for storage rooms and vessels Keep in closed original container. Ventilate store-rooms thoroughly. Advice on storage compatibility Do not store together with food. Do not store together with oxidizing agents. Store at cool and aired place and at distance to acids and alkalies. Further information on storage conditions Keep container tightly closed and store at cool and aired place. Protect from light. Do not keep long-term to heat. Storage temperature between 10 C to 30 C (=50 F to 86 F). Keep in a cool place, heat causes increase in pressure and risk of bursting. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION CAS-Nr. Name Code [mg/m³] [ppm] Remark Butanone 8 hours Short-time Respiratory protection Breathing apparatus in the event of high concentrations. Hand protection Gloves (solvent-resistant) Eye protection Tightly fitting goggles General protective measures Do not inhale vapors. Avoid contact with the skin. Hygiene measures Do not eat or drink when working. Remove soaked clothing immediately. After work wash thoroughly PHYSICAL AND CHEMICAL PROPERTIES Form: Color: Odor: Boiling point: Vapor pressure: Density: Flash point: Ignition temperature: Explosion limits: Additional information Vapors are heavier than air. Flammable liquid Liquid Colorless, clear Ketone like >79 C. < C (= 122 F ) ~ 20-4 C (Method: DIN 51755) 505 C lower 1,8 Vol-% upper 11,5 Vol-% 10. STABILITY AND REACTIVITY Conditions to avoid Reactions with acids and strong oxidising agents. Reactions with alkalies. Hazardous decomposition products Carbon monoxide and carbon dioxide Thermal decomposition Remark No decomposition if used as directed. Rev.: June 5, 2015 Page 3/5 Solvent

4 11. TOXICOLOGICAL INFORMATION Acute toxicity/irritability/sensitization Value/Validation LD 50 acute oral > 2600 mg/kg LD 50 acute dermal > 8000 mg/kg LC 50 acute inhalation 20 mg/l (4 h) Species rat rabbit rat Method Remark Experiences made from practice May be absorbed through the skin. Experiences at humans: may cause hypersensitivity reactions on skin in case of persons suffering from hypersensitivity. Sensitization through skin contact possible. Has a degreasing effect on the skin. Irritates respiratory tract. Inhalation causes headache/nausea. Irritates mucous membranes. Inhalation causes narcotic effect/intoxication. 12. ECOLOGICAL INFORMATION Data on elimination (persistence and degradability) Elimination rate Method of analysis Method Validation Physicochemical degradability > 50 % COD decrease Biological degradability The product is biodegradable. General regulation Do not allow uncontrolled leakage of product into the environment. Product is not allowed to be discharged into the ground water or aquatic environment. Product is not allowed to be discharged into aquatic environment, drains or sewage treatment plants. 13. DISPOSAL CONSIDERATIONS Waste code no * Name of waste Waste ink containing dangerous substances Wastes marked with an asterisk are considered to be hazardous waste pursuant to Directive 91/689/EEC on hazardous waste. Recommendations for the product Collect waste separated in suitable, labeled and lockable containers. Product rests: send for disposal, e.g. special waste incineration. Recommendations for packaging Totally emptied packaging may be treated as household waste. 14. TRANSPORT INFORMATION Land and inland navigation transport ADR/RID Marine transport IMDG Air transport ICAO/IATA-DGR Transport/further information Regulations concerning free quantities are to be observed. Rev.: June 5, 2015 Page 4/5 Solvent

5 15. REGULATORY INFORMATION Classification F Highly flammable Xi Irritant R-phrases 11 Highly flammable. 36 Irritating to eyes. 66 Repeated exposure may cause skin dryness or cracking. 67 Vapors may cause drowsiness and dizziness. S-phrases 16 Keep away from sources of ignition - No smoking. 24/25 Avoid contact with skin and eyes. 33 Take precautionary measures against static discharges. 7 Keep container tightly closed. Hazardous ingredients for labeling butanone VOC standard VOC value -800 g/l 16. OTHER INFORMATION Recommended uses and restrictions National and local regulations concerning chemicals shall be observed. Further information The information contained herein is based on the state of our knowledge. It characterizes the product with regard to the appropriate safety precautions. It does not represent a guarantee of the properties of the product. Wording of the R-phrases specified in chapter 3 (not the classification of the formulation!) R 11 Highly flammable. R 36 Irritating to eyes. R 66 Repeated exposure may cause skin dryness or cracking. R 67 Vapors may cause drowsiness and dizziness. The protruding information is based on the contemporary state of knowledge; however, they represent no assertion from product qualities and also establish no contractual right circumstance. The product is determined for the industrial workmanship / use. Existing laws and regulations are to be considered by customer of our products in own responsibility. Rev.: June 5, 2015 Page 5/5 Solvent