Material Safety Data Sheet
|
|
|
- Vanessa Delilah Walton
- 5 years ago
- Views:
Transcription
1 Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V - Reactivity Data SECTION VI - Health Hazard Data SECTION VII - Precautions for Safe Handling and Use SECTION VIII - Control Measures SECTION IX - Label Data SECTION X - Transportation Data SECTION XI - Site Specific/Reporting Information SECTION XII - Ingredients/Identity Information SECTION I - Material Identity Item Name Part Number/Trade Name ROLL-ON STAMP PAD INKER, RED National Stock Number CAGE Code (1 of 10) [3/9/ :28:54 PM]
2 Part Number Indicator A MSDS Number HAZ Code A SECTION II - Manufacturer's Information Manufacturer Name P.O. Box Street City State SANFORD CORPORATION 2740 WASHINGTON BLVD BELLWOOD IL Zip Code Emergency Phone (800) Information Phone (800) MSDS Preparer's Information Street City State 2740 WASHINGTON BLVD BELLWOOD IL Zip Code Date MSDS Prepared/Revised Date of Technical Review 14JUN99 23AUG91 (2 of 10) [3/9/ :28:54 PM]
3 Active Indicator N Alternate Vendors Vendor #5 CAGE BKYYT SECTION III - Physical/Chemical Characteristics Specification Number Appearance/Odor TT-I-556 RED LIQUID W/BLAND ODOR Boiling Point >550F Melting Point Vapor Pressure Vapor Density <.1MMHG72F Specific Gravity 1.3 Decomposition Temperature Evaporation Rate Solubility in Water Percent Volatiles by Volume Chemical ph Corrosion Rate Container Type COMPLETE N Container Pressure Code 1 (3 of 10) [3/9/ :28:54 PM]
4 Temperature Code 4 Product State Code L SECTION IV - Fire and Explosion Hazard Data Flash Point Method Lower Explosion Limit Upper Explosion Limit Extinguishing Media Special Fire Fighting Procedures Unusual Fire/Explosion Hazards PMCC SECTION V - Reactivity Data Stability Stability Conditions to Avoid Materials to Avoid Hazardous Decomposition Products Hazardous Polymerization Polymerization Conditions to Avoid LD50 - LD50 Mixture YES SECTION VI - Health Hazard Data (4 of 10) [3/9/ :28:54 PM]
5 Route of Entry: Skin Route of Entry: Ingestion Route of Entry: Inhalation Health Hazards - Acute and Chronic PRODUCT IS T CONSIDERED TO BE HAZARDOUS Carcinogenity: NTP Carcinogenity: IARC Carcinogenity: OSHA Explanation of Carcinogenity Symptoms of Overexposure NE PRODUCT IS T CONSIDERED TO BE HAZARDOUS Medical Cond. Aggrevated by Exposure Emergency/First Aid Procedures SECTION VII - Precautions for Safe Handling and Use Steps if Material Released/Spilled WIPE UP W/ABSORBENT MATERIAL & DISCARD AS SOLID WASTE Neutralizing Agent (5 of 10) [3/9/ :28:54 PM]
6 Waste Disposal Method DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS Handling and Storage Precautions KEEP CAP ON BOTTLE WHEN T IN USE Other Precautions THIS PRODUCT IS CONSIDERED SAFE WHEN USED UNDER RMALUSE CONDITIONS SECTION VIII - Control Measures Respiratory Protection NE UNDER RMAL USE CONDITIONS Ventilation NE UNDER RMAL USE CONDITIONS Protective Gloves NE UNDER RMAL USE CONDITIONS Eye Protection NE UNDER RMAL USE CONDITIONS Other Protective Equipment Work Hygenic Practices (6 of 10) [3/9/ :28:54 PM]
7 Supplemental Health/Safety Data SECTION IX - Label Data Protect Eye Protect Skin Protect Respiratory Chronic Indicator Contact Code Fire Code Health Code React Code Specific Hazard and Precaution UNKWN UNKWN UNKWN UNKWN TARGET ORGANS LISTED SECTION X - Transportation Data Container Quantity 2 Unit of Measure OZF SECTION XI - Site Specific/Reporting Information Volatile Organic Compounds (P/G) 0 Volatile Organic Compounds (G/L) 0 (7 of 10) [3/9/ :28:54 PM]
8 SECTION XII - Ingredients/Identity Information Ingredient # 1 Ingredient Name NIOSH Number Proprietary DYE DY Percent 0 OSHA PEL ACGIH TLV Recommended Limit Ingredient # 2 Ingredient Name WATER CAS Number NIOSH Number Proprietary ZC Percent 0 OSHA PEL ACGIH TLV Recommended Limit Ingredient # 3 Ingredient Name GLYCERIN CAS Number (8 of 10) [3/9/ :28:54 PM]
9 NIOSH Number Proprietary MA Percent 0 OSHA PEL ACGIH TLV Recommended Limit Ingredient # 4 Ingredient Name DIETHYLENE GLYCOL CAS Number NIOSH Number Proprietary ID Percent 0 OSHA PEL ACGIH TLV Recommended Limit Ingredient # 5 Ingredient Name POLYETHYLENE GLYCOL CAS Number NIOSH Number Proprietary TQ Percent 0 (9 of 10) [3/9/ :28:54 PM]
10 OSHA PEL ACGIH TLV Recommended Limit (10 of 10) [3/9/ :28:54 PM]
Material Safety Data Sheet
Page 1 of 5 Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data
*SECTION I - Material Identity* Item Name
*SECTION I - Material Identity* Item Name Part Number/Trade Name 50/50 TIN LEAD SOLDER National Stock Number 3439000860204 CAGE Code 27911 Part Number Indicator A MSDS Number 90444 HAZ Code B *SECTION
Material Safety Data Sheet
Page 1 of 5 Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data
SECTION I - Material Identity SECTION II - Manufacturer's Information
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
Material Safety Data Sheet
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
SECTION I - Material Identity Item Name CLEAR AEROSOL COATING. CAGE Code Part Number Indicator MSDS Number HAZ Code
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
Material Safety Data Sheet
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
Material Safety Data Sheet
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
Material Safety Data Sheet
Material Safety Data Sheet SECTION I - Material Identity SECTION II - Manufacturer's Information SECTION III - Physical/Chemical Characteristics SECTION IV - Fire and Explosion Hazard Data SECTION V -
29 CFR Standard must be Form Approved Consulted for specific requirements. OMB No OSHA PEL
Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA's Hazard Communication Standard, (Non-Mandatory Form) 29 CFR 1910.1200.
Date Prepared July 28, 2008
Material Safety Data Sheet May be used to comply with U.S. Department of Labor Occupational Safety and Health Administration OSHA's Hazard Communication Standard, (n-mandatory Form) 29 CFR 1910.1200. Standard
Inert Ingredients non-hazardous C Specific Gravity (H 2 0 = 1): Percent volatile by volume (%): Available.
Material Safety Data Sheet May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910 1200. Standard must be consulted for specific requirements. IDENTITY (as Used on Label and List):
MSDS For MICR 7780 RIBBON
Date Printed: 1/30/03 Page: 1 MATERIAL SAFETY DATA SHEET ATTENTION! IMPORTANT USER INFORMATION. STOCK NUMBER 182465 Section I (General Information) IDENTITY (AS USED ON LABEL AND LIST): 7780 MICR Ribbon
MONROE CHEMICAL -- ASTRO-CUT 2001 A,HEAVY DUTY BIOSTABLE CUTTING &
MONROE CHEMICAL -- ASTRO-CUT 2001 A,HEAVY DUTY BIOSTABLE CUTTING & MATERIAL SAFETY DATA SHEET NSN: 915000N033977 Manufacturer's CAGE: 60030 Part No. Indicator: B Part Number/Trade Name: ASTRO-CUT 2001
Page 1 of 5. Tritium Exit Sign
Best Lighting/Foreverlite Products -- Tritium (H-3) Exit Sign MSDS Safety Information FSC: 1240 MSDS Date: 9/22/2006 MSDS Num: BPZMP NIIN: 01318932 Product ID: Tritium (H-3) Exit Sign MFN: 02 Responsible
Manufactured and Supplied By: PyroTech, Inc. Business Telephone: A Republic Drive Date Prepared: July 1, 2000
FRC EX12 Material Safety Data Sheet IDENTITY: FRC EX12 SECTION I - PREPARATION/PRODUCT INFORMATION Manufactured and Supplied By: PyroTech, Inc. Business Telephone: 630-628-1120 1120-A Republic Drive Date
Section I. Section II - Hazardous Ingredients/Identity Information. Material Safety Data Sheet
Material Safety Data Sheet May be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. U.S. Department of Labor Occupational
Section I Date Prepared June 11, 2011 Signature of Preparer (optional) One BernzOmatic Drive. Medina, NY 14103
Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA's Hazard Communication Standard, (Non-Mandatory Form) 29 CFR 1910.1200.
MATERIAL SAFETY DATA SHEET
03 AUG 2005 MSDS ID# MATERIAL SAFETY DATA SHEET PRODUCT NAME: PART #: SECTION I COMMON NAME: CHEMICAL NAME: FORMULA/CAS: 46-33 SERIES, 46-34 SERIES and 78-55-SERIES SUPPLIER INFORMATION N/A N/A SUPPLIER:
M A T E R I A L S A F E T Y D A T A S H E E T
Richard Wadey From: Saved by Windows Internet Explorer 7 Sent: Tuesday, February 23, 2010 5:03 PM Subject: MSDS: Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E
Manufactured and Supplied By: PyroTech, Inc. Business Telephone: A Republic Drive Date Prepared: July 1, 2000
FRC EX4 Material Safety Data Sheet IDENTITY: FRC EX4 SECTION I - PREPARATION/PRODUCT INFORMATION Manufactured and Supplied By: PyroTech, Inc. Business Telephone: 630-628-1120 1120-A Republic Drive Date
SAFETY DATA SHEET 8/20/2015
SAFETY DATA SHEET 8/20/2015 Material Name CHELSEA CLASSICAL STUDIO COLD-PRESSED LINSEED OIL PALE Company Information Chelsea Classical Studio 526 West 26th Street Suite 415 New York, NY 10001 Phone: 212-225-0206
DOD Hazardous Material Information (ANSI Format) For Cornell University Convenience Only
Division of Facilities Services DOD Hazardous Material Information (ANSI Format) For Cornell University Convenience Only Section 1 - Product and Company Identification Section 2 - Compositon/Information
MURATEC MODEL F-76 / F-86 (page 1 of 4)
MURATEC MODEL F-76 / F-86 (page 1 of 4) Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA s Hazard Communication Standard
M A T E R I A L S A F E T Y D A T A S H E E T
MSDS: Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: F-EXCALIBUR, Reference #: 82812 Product Name:
MATERIAL SAFETY DATA SHEET 10/22/2012
Page 1 of 6 MATERIAL SAFETY DATA SHEET 10/22/2012 MANUFACTURER OR DISTRIBUTOR: Color Craft, Ltd./Createx Colors 14 Airport Park Road East Granby, Connecticut 06026 INFORMATION TELEPHONE NUMBER: 800-509-6563
*MATERIAL SAFETY DATA SHEET*
*MATERIAL SAFETY DATA SHEET* MSDS DATE: 06/04/2013 PRODUCT NAME: McKesson Hydrogen Peroxide 3%, USP MFR #: 23-F0010 (4 oz.) 23-D0012 (16 oz.) 23-A0013 (1 Gallon) DISTRIBUTED BY: McKesson Medical-Surgical
SECTION 1 : Chemical Product and Company Identification EMERGENCY TELEPHONE NUMBER: CHEMTREC
Uline Aluminum Foil Tape SECTION 1 : Chemical Product and Company Identification MSDS Name: Aluminum Foil Tape Distributor Name:Uline Distributor Address: 2200 S. Lakeside Drive Waukegan, IL 60085 EMERGENCY
MATERIAL SAFETY DATA SHEETS. SECTION I Manufacturer/Distributor Telephone No.: (315)
IDENTIFY: Premium Buffing Compound PRODUCT CODE: CR1 MATERIAL SAFETY DATA SHEETS SECTION I Manufacturer/Distributor Telephone No.: (315) 797-9088 DICO PRODUCTS CORP. Emergency Telephone 200 Seward Ave.
SAFETY DATA SHEET 8/26/2015
SAFETY DATA SHEET 8/26/2015 SECTION I - IDENTIFICATION Material Name MOD PODGE MATTE Company Information Plaid Enterprises, Inc. 3225 Westech Drive Norcross, GA 30092 Phone: 1-678-291-8213 Fax: 1-678-291-8363
Material Safety Data Sheet
Section I Product Identification Product Name: Type C Electrolyte Common Name: Potassium Bicarbonate, 20% w/v Manufacturer: Teledyne Instruments/ Address: 16830 Chestnut Street, City of Industry, CA 91748
GENERAL PENCIL COMPANY, INC.
for #21938 - GENERALS CHARCOAL Page 1 of 12 Material Safety Data Sheet May be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements.
SECTION I - PRODUCT IDENTIFICATION Gallium oxide, powder and pieces. US National Poison Hotline
SECTION I - PRODUCT IDENTIFICATION MANUFACTURER NAME AND ADDRESS: TELEPHONE NUMBERS: Kurt J Lesker Co CHEMTREC (800)424-9300 PO Box 10 1925 Route 51 Clairton, PA 15025 SYNONYMS US National Poison Hotline
ZOCO ZINC OXIDE. Section 1 - Product and Company Identification ZOCO ZINC OXIDE
Section 1 - Product and Company Identification Product Identification: Date of MSDS: 06/14/1989 Technical Review Date: 09/14/1995 FSC: 6810 NIIN: LIIN: 00N044988 Submitter: N EN Status Code: C MFN: 01
Material Safety Data Sheet
Material Safety Data Sheet Product Name: Rejex-it Fog Force HMIS Codes: H F R P Product Code: 1 1 0 B Section I Manufacturer Identification Manufactured For: Ceannard Inc Address: PO Box 2404 - Gastonia,
Disposal: Place empty container in trash. Give partial or full container to the safety officer.
Chemical Name: Isopropyl Alcohol 91% Manufacturer: HUMCO Container size: 16oz. Location: VLA Disposal: Place empty container in trash. Give partial or full container to the safety officer. Material Safety
14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821
MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH-2 FIRE-1 REACTIVITY- 0 US/CANANDA : 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:
M A T E R I A L S A F E T Y D A T A
M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: F-D-WORM CHEW Product Name: Manufacturer Name Telephone and Address: Numbers: Distributed by: CHEMTREC
Section I Distributor s Name: Section II Hazard Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)
Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA S Hazard Communication Standard (Non-Mandatory Form) 29 CFR 1910.1200.
DOD Hazardous Material Information (ANSI Format) For Cornell University Convenience Only
Page 1 of 7 Division of Facilities Services DOD Hazardous Material Information (ANSI Format) For Cornell University Convenience Only Section 1 - Product and Company Identification Section 2 - Compositon/Information
SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification
Product Code: Product Name: Company Name: Web site address: Emergency Contact: Information: 1. Product and Company Identification 2. Hazards Identification Phone Number: Distributor: Southern Maintenance
MATERIAL SAFETY DATA SHEET. Page Number:
Page Number: 1 SECTION I - PRODUCT AND COMPANY INFORMATION Product Name: HM-270tm CONSTRUCTION SILICONE SEALANT HMIS Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPE: B Company Identification: OSI SEALANTS,
SAFETY DATA SHEET 8/5/2015
SAFETY DATA SHEET 8/5/2015 Material Name CHARLES LEONARD POCKET BULLET TIP DRY ERASE MARKER Company Information Charles Leonard, Inc. P.O. Box 18048 Hauggauge, NY 11788-8848 Phone: 631-273-6700 Fax: 1-631-273-6777
MATERIAL SAFETY DATA SHEET
*Estimate N/A-Not Applicable N/R-Not Restricted N/E-Not Established MATERIAL SAFETY DATA SHEET NOTE: BLANK SPACES ARE NOT PERMITTED. IF ANY ITEM IS NOT APPLICABLE, THE SPACE MUST BE MARKED TO INDICATE
M A T E R I A L S A F E T Y D A T A S H E E T
MSDS: Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: F-MUSCA STICK Product Name: Chemical Family:
Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( )
Safety Data Sheet Product No. 19250 Tissue-Tack Adhesive Issue Date (07-23-15) Review Date (08-31-17) Section 1: Product and Company Identification Product Name: Tissue-Tack Adhesive Synonym: Tissue Tack
SECTION I: PRODUCT IDENTIFICATION (770) SECTION II - HAZARD IDENTIFICATION SECTION III - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Liquid Cement Colors MATERIAL SAFETY DATA SHEET (Complies with OSHA 29 CFR 1910.1200) SECTION I: PRODUCT IDENTIFICATION The QUIKRETE Companies Emergency Telephone Number One Securities Centre (770) 216-9580
SAFETY DATA SHEET. Section 1: Product and Company Identification
Division: Address: Product/Style: Chemical Family: Chemical Formula: Emergency Phone: 866-312-1837 Product Use: Phone: 229-242-1931 Fax: 229-2421947 Prepared By: DAN LAFACE Section 2: Hazards Identification
M A T E R I A L S A F E T Y D A T A S H E E T
MSDS: Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: F-VIODINE Product Name: Chemical Family: Compound
MATERIAL SAFETY DATA SHEET TEMP-BOND NE ( NON-EUGENOL ) ACCELERATOR Temporary Cement
MATERIAL SAFETY DATA SHEET TEMP-BOND NE ( NON-EUGENOL ) ACCELERATOR Temporary Cement 1 - IDENTIFICATION Manufacturer: Kerr Corporation Address: 1717 West Collins Avenue City, State, Zip: Orange, CA 92867-5422
MATERIAL SAFETY DATA SHEET. TST Orange Power Drop-Ins
1 of 5 = SECTION I - COMPOSITION / INFORMATION ON MATERIALS = WEIGHT REPORTABLE COMPONENTS CAS NUMBER PERCENT ----------------------------------------------------------------------------------------- Sodium
MATERIAL SAFETY DATA SHEET (MSDS) MATERIAL SAFETY DATA SHEET EM SCIENCE 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION. Catalog Number(s):
MATERIAL SAFETY DATA SHEET (MSDS) MATERIAL SAFETY DATA SHEET EM SCIENCE 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Manufacturer...: Preparation Date.: 3/6/98 EM SCIENCE A Division of EM Industries
Lifeline Exterior. Our Value Priced Exterior Wall Stain
Exterior Wood Stain & Finishes Lifeline Exterior Our Value Priced Exterior Wall Stain Our original exterior wall formula has been updated and improved for over 20 years. Lifeline Exterior forms a thin
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET EMERGENCY CONTACT: CHEMTREC 1-800-424-9300 */Commercial# 1 (703) 741-6009 SECTION I IDENTIFICATION Trade Name: Chloraprep 2.0% Vendor: Medi-Flex, Inc. Cross Reference: N/A Formula:
M A T E R I A L S A F E T Y D A T A S H E E T
MSDS: Return to MSDS List, Previous MSDS, Next MSDS M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: 45735-2-270 Product Name: Manufacturer Name
MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Wizards Metal Polish SYNONYMS: PRODUCT CODES: #11011 MANUFACTURER: RJ Star Inc. DIVISION: ADDRESS: 11469 8 th St NE Hanover, MN 55341 EMERGENCY
Material Safety Data Sheet
May 3, 2012 Product Code: REC-120 Product Description: Cyan inkjet printing ink Ingredients Ingredient Case # % OSHA PEL ACGIH TLV Glycol alcohol 000056-81-5 5 20 Not listed Not listed 2-Butoxyethanol
MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Bio Stat Original #C213 SYNONYMS: PRODUCT CODES: C213 MANUFACTURER: Chemax Corporation DIVISION: ADDRESS: PO BOX 7453 Beaumont, TX 77726 EMERGENCY
Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm
Material Safety Data Sheet Product No. 815-110 Colloidal Silica Suspension, 0.06µm Issue Date (03-24-08) Review Date (04-14-12) Section 1: Product and Company Identification Product Name: Colloidal Silica
Norland Index Matching Liquid 150
Norland Index Matching Liquid 150 Norland Index Matching Liquid 150 is a low viscosity liquid monomer that can be used as an index matching media for temporary splicing using the Norland Optical Splice.
M A T E R I A L S A F E T Y D A T A S H E E T
MSDS: Return to MSDS List, First MSDS in list., Last MSDS in list. M A T E R I A L S A F E T Y D A T A S H E E T Generated 07/18/2007, Revision 07/18/2007, Supercedes Revision 04/30/2007, Date Created
Material Safety Data Sheet
January 1, 2012 Product Code: 720 Product Description: Black Calculator Ink Roller Composition/Information on Ingredients Component CAS Reg. No. Weight % Treated Middle Distillate NL NA Treated Naphthenic
MATERIAL SAFETY DATA SHEET
*Estimate N/A-Not Applicable N/R-Not Restricted N/E-Not Established MATERIAL SAFETY DATA SHEET NOTE: BLANK SPACES ARE NOT PERMITTED. IF ANY ITEM IS NOT APPLICABLE, THE SPACE MUST BE MARKED TO INDICATE
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT NAME:KEY #620 ESD EPOXY COATING PART B PRODUCT CODE: KR-620-ESD-RC/FC-B SECTION 1: MANUFACTURER IDENTIFICATION MANUFACTURER'S NAME: KEY RESIN COMPANY ADDRESS: 4050 Clough
14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821
MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:
SAFETY DATA SHEETS. This SDS packet was issued with item: N/A
SAFETY DATA SHEETS This SDS packet was issued with item: 078558947 N/A Page 1 of 4 LUITPOLD PHARMACEUTICALS. INC. ANIMAL HEALTH DIVISION MATERIAL SAFETY DATA SHEET PRODUCT NAME: POLYSULFATED GLYCOSAMINOGLYCAN,
SAFETY DATA SHEET 7/7/2015
SAFETY DATA SHEET 7/7/2015 SECTION I - IDENTIFICATION Material Name SPEEDBALL W/S BLOCK PRINTING INK Manufacturer Information Speedball Art Products Co. P.O. Box 5157 2301 Speedball Road Statesville, NC
507 Rapid Set Cold Pothole Repair Material Safety Data Sheet
507 Rapid Set Cold Pothole Repair Material Safety Data Sheet means No Data Available Identity (As Used on Label and List) Note: Blank spaces are not permitted. It any item is 507 Rapid Set Cold Pothole
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: M-Prep Conditioner A April 13, 2010 Vishay Measurements Group, Inc. Post Office Box 27777 Raleigh, NC 27611 919-365-3800
SAFETY DATA SHEET SECTION 1 - IDENTIFICATION
K-FLEX NBR/PVC Elastomeric Foam Page 1 of 4 SAFETY DATA SHEET SECTION 1 - IDENTIFICATION Manufacturer s name and address: Supplier s name and address: Refer to Manufacturer K-FLEX USA 100 Nomaco Dr Youngsville,
SAFETY DATA SHEET SECTION I IDENTIFICATION. SDS No: SDS-B-EN Effective Date: 01/01/2017
SAFETY DATA SHEET SDS No: SDS-B-EN Effective Date: 01/01/2017 SECTION I IDENTIFICATION Product name: Uncoated Woodfree Paper Product code: See Product Lists found in Section XVI (Page 5 of 5) Manufacturer/Supplier:
SAFETY DATA SHEET 8/7/2015
SAFETY DATA SHEET 8/7/2015 SECTION I - IDENTIFICATION Material Name SPEEDBALL SCREEN FILLER Company Information Speedball Art Products Co. P.O. Box 5157 2301 Speedball Road Statesville, NC 28677 Phone:
MATERIAL SAFETY DATA SHEET
Section I - Product and Company Information MATERIAL SAFETY DATA SHEET Product Name: CAS Number: Hazard Rating: EPA Registration: Company Identification: Prep Coat Mixture Health: 1 Fire: 1 Reactivity:
MATERIAL SAFETY DATA SHEET EM SCIENCE 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
MATERIAL SAFETY DATA SHEET EM SCIENCE 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Manufacturer...: Preparation Date.: 10/11/95 EM SCIENCE A Division of EM Industries Information Phone Number.: 856-423-
EMERGENCY PHONE : DATE PRINTED : 9/28/2009 INFORMATION PHONE : NAME OF PREPARER : AARON NUTTER
410A ACRYLIC FLAT H P ACCENT Page: 2 PRODUCT NAME: 410A ACRYLIC FLAT H P ACCENT HMIS CODES: H F R P PRODUCT CODE: 410A 1*0 0 ================== SECTION I - MANUFACTURER IDENTIFICATION =================
Page 1 of 6!"# $ %%$& '!$'"(!) %'*)+$,-.,-/ 0 SECTION I SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Low viscosity with sharp ammonia odor SPECIFIC GRAVITY (H20=1) 0.99 EVAPORATION RATE
MATERIAL SAFETY DATA SHEET PRODUCT NAME: FLEXIBLE EPOXY PART B HMIS CODES: H F R P PRODUCT CODE: Flexible Epoxy-B 2 1 0 C SECTION 1: MANUFACTURER IDENTIFICATION MANUFACTURER S NAME: EPOXY SYSTEMS, INC.
SECTION I - PRODUCT IDENTIFICATION Silicon nitride, powder and pieces. US National Poison Hotline
SECTION I - PRODUCT IDENTIFICATION MANUFACTURER NAME AND ADDRESS: TELEPHONE NUMBERS: Kurt J. Lesker Co CHEMTREC (800)424-9300 P.O. Box 10 1925 Route 51 Clairton, PA 15025 SYNONYMS US National Poison Hotline
Safety Data Sheet Avalanche Glass Cleaner. JEM MFG LLC 1901 Parrish Drive SE Rome, GA (706) CHEMTREC :...
SECTION I - IDENTIFICATION JEM MFG LLC 1901 Parrish Drive SE Rome, GA 30161 (706) 232-1709 CHEMTREC :... (800) 424-9300 Product Number Product Name Chemical Family CAS Number Date Prepared Revision Number
Material Safety Data Sheet
CMC LV I. PRODUCT AND COMPANY IDENTIFICATION Product Name: CMC LV Date Revised: 7/2010 Generic Description: Carboxymethylcellulose Supplier: NOV FluidControl 4310 N. Sam Houston Parkway E Houston, TX 77032
14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821
MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821 *HMIS: HEALTH- 2 FIRE- 1 REACTIVITY- 0 EMERGENCY PHONE: US/CANADA: 800-255-3924 INT L COLLECT: + 813-248-0585 Carcinogen:
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Product Name: Lustre / Metallic Glazes (Lead/Copper) Manufacturer s Name: American Art Clay Co., Inc. 6060 Guion Road Indianapolis, IN 46254 Product Code: L Series Information
SAFETY DATA SHEET CREATEX COLORS PURE PIGMENTS 10/05/15 SECTION I PRODUCT IDENTIFICATION SECTION II HAZARDS IDENTIFICATION
Manufacturer or Distributor: Color Craft, Ltd./Createx Colors 14 Airport Park Road East Granby, Connecticut 06026 Phone: 800-509-6563 Fax: 1-860-653-0643 Information Telephone Number: 800-243-2712 Emergency
MATERIAL SAFETY DATA SHEET (MSDS)
Agrico Canada L.P. 2896 Slough Street, Unit #6 Mississauga, ON L4T 1G3 T.M. MATERIAL SAFETY DATA SHEET (MSDS) MSDS NUMBER ACL-002 (REV. DEC 2015) PAGE 1 OF 4 SECTION I PRODUCT CHEMICAL/ SYNONYMS CHEMICAL
SAFETY DATA SHEET. Liquid Silver Sparkle. 1. Product and Company Identification. 2. Hazards Identification
Product Code: Product Name: Company Name: Web site address: Emergency Contact: Information: Liquid Silver Sparkle 1. Product and Company Identification 2. Hazards Identification Phone Number: Distributor:
MATERIAL SAFETY DATA SHEET
Identity Group, LLC MATERIAL SAFETY DATA SHEET REVISION DATE: 3/4/2008 PREPARED BY: S. Hinton ADDRESS: 1480 Gould Drive PHONE: (931) 432-4000 Cookeville, TN 38506 24 Hour Emergency Contact: CHEMTREC 1-800-424-9300
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET HMIS CODES: H F R P 0 2 0 A May be used to comply with OSHA s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements. IDENTITY
SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT
MSDS7453 M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1. Product and Company Identification Product Code: L-TRAPNTOSSATTR, Reference #: 14624 Product Name: Chemical Family: Compound Manufacturer
Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 11/8/11 REV: E * HMIS CODE ratings are estimated by Epoxy Technology.
MATERIAL SAFETY DATA SHEET PRODUCT NAME: EPO-TEK 353NDT Black, Part A BILLERICA, MA 01821 EMERGENCY PHONE: *HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 US/CANANDA : 800-255-3924 INT L COLLECT: + 813-248-0585
SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT CODES: Stick-it! ast-05 MANUFACTURER: Clean Plus, Inc. DIVISION: N/A ADDRESS: 138 East Main Street / PO Box 678 West Concord,
Material Safety Data Sheet
PH: 901-761-0050 Page 1 Of 5 I. IDENTIFICATION Chemical Name: Not applicable, formulated mixture. Chemical Family: Herbicide Activator and Water Conditioner Formula: Not applicable, formulated mixture.
SECTION 1 MATERIAL IDENTIFICATION AND INFORMATION % OSHA PEL. Health Flammability Reactivity HMIS Hazard Code NFPA Hazard Code 2 1 1
MATERIAL SAFETY DATA SHEET The Step Stuff Liquid Identity (Trade name as used on label) Manufacturer MSDS # Jack s Magic Products, Inc. Address CAS # 12435 73 rd CT. Date Prepared Largo, FL 33773 08/2012
WARNING: Flammable liquid and vapor.
SAFETY DATA SHEET PRODUCT NAME: SECTION I IDENTIFICATION STARFIRE RV A/F W/ETHANOL -50 Pg. 1/5 SUPPLIER NAME: COOLANTS PLUS, INC. ADDRESS: 2570 VAN HOOK AVE. HAMILTON, OH. 45015 PHONE: (888)258-8723 EMERGENCY
UNDERSTANDING & INTERPRETING MATERIAL SAFETY DATA SHEETS. Introduction to Understanding MSDS's
UNDERSTANDING & INTERPRETING MATERIAL SAFETY DATA SHEETS Introduction to Understanding MSDS's Material Safety Data Sheets contain all of the basic data needed to work safely with the chemicals they cover.
SAFETY DATA SHEET SECTION I IDENTIFICATION SERVICE PRO CLEAN & MEAN DEGREASER MANUFACTURED FOR: AIOD 3720 S. VENOY ADDRESS: PHONE: EMERGENCY PHONE:
SAFETY DATA SHEET SECTION I IDENTIFICATION PRODUCT NAME: Pg. 1/5 SUPPLIER: ADDRESS: PHONE: CUL-MAC INDUSTRIES, INC. MANUFACTURED FOR: AIOD 3720 S. VENOY ADDRESS: PO BOX 1861 WAYNE, MI 48184 (734) 728-9700
Section I: Product and Company Identification Manufactured for: Chauvet
Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA's Hazard Communication Standard, (Non-Mandatory Form) 29 CFR 1910.1200. Standard
MATERIAL SAFETY DATA SHEET
Sasol Solvents Trading as Sasol Chemicals North America LLC 900 Threadneedle Houston, Texas 77079 MATERIAL SAFETY DATA SHEET EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 MSDS or Product Information: 281
*MATERIAL SAFETY DATA SHEET*
*MATERIAL SAFETY DATA SHEET* PRODUCT NAME: McKesson Lubricating Jelly MFR #: 119-8942 (3g packet) 119-8946 (5g packet) 119-8919 (4 oz. tube) DISTRIBUTED BY: McKesson Medical-Surgical Inc. 8741 Landmark
Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )
Material Safety Data Sheet Product No. 27055 PELCO CryO-Z-T Issue Date (02-27-08) Review Date (06-01-12) Section 1: Product and Company Identification Product Name: PELCO CryO-Z-T Synonym: Cryo Embedding
TESCO Products Inc. Crystal Seal II
TESCO Products Inc. Crystal Seal II MATERIAL SAFETY DATA SHEET Identity (As used on label and list) Note: Blank fields are Crystal Seal II not permitted Section I Manufacturer's Name Emergency Phone #