Material Safety Data Sheet

Transcription

1 May 3, 2012 Product Code: REC-120 Product Description: Cyan inkjet printing ink Ingredients Ingredient Case # % OSHA PEL ACGIH TLV Glycol alcohol Not listed Not listed 2-Butoxyethanol ppm (skin) 25 ppm (skin) Dyestuff (1) 0 10 Not listed Not listed Vehicle: Water Remaining ingredients not considered hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR (1) The identity of the dye is considered proprietary by the original manufacturer. Under the requirements of Section 313 of the Emergency Planning and Community Right-to-Know Act of 1986 and of 40 CFR 372 the dye contains: 10% copper compounds. Chemical Characteristics Boiling Point: Approx. 100 C Melting Point: Not applicable (Aqueous solution) Vapor Pressure: Approx Specific Gravity: Approx gm/cm 3 Vapor Density (Air = 1): Approx gm/cm 3 Freezing Point: Lower than water (>0 C) Solubility in Water: Miscible in water. ph: 7.0 +/- 25 C Fire and Explosion Hazard Data Flash Point: Not applicable as mixture (water based). Volatile Organic Compound (VOC) Content: Not established. UFL: Not established. LFL: Not established. Extinguishing Media: Use media suitable for surrounding fire. Special Fire Fighting Procedures: None. Unusual Fire and Explosion Hazards: With large amounts, combustion may produce carbon dioxide and toxic carbon monoxide. Material of concern greatly diluted. 1

2 Reactivity Data Stability: Stable. Conditions to Avoid: None. Incompatibility (Materials to Avoid): Oxidizing agents, reducing agents, strong acids and strong bases. Contact with zinc, magnesium and galvanized metals. Hazardous Decomposition or Byproducts: Combustion may produce carbon dioxide, and toxic carbon monoxide. Hazardous Polymerization: Will not occur. Health Hazard Data Routes of Entry Inhalation: No. Skin: Yes. Ingestion: Yes. Health Hazards (Acute and Chronic): Avoid contact with eyes. May cause eye and skin irritation. Carcinogenicity: None (as defined by OSHA Hazard Comm. Std, 29 CFR ) Signs and Symptoms of Exposure: None. Medical Conditions Generally Aggravated by Exposure: None. Eyes: Flush thoroughly with water. If irritation persists, seek medical help. Skin: Wash with soap and water. Ingestion: Give 1 or 2 glasses of water to dilute then induce vomiting. Get immediate medical attention. NEVER give fluids or induce vomiting if the victim is unconscious or having convulsions. (Product considered to have moderate toxicity.) Precautions for Safe Handling, Use and Control Measures Steps to be taken in case material is released or spilled: Flush area with water, absorb with inert material and dispose. If vapors or mists are generated wear a NIOSH/MSHA approved organic vapor/mist respirator. Waste Disposal Method: Dispose of in accordance with federal, state/provincial and local regulations. Precautions to be taken in Handling and Storing: Protect from freezing. Protective Gloves: Recommended. Eye Protection: Safety glasses. Other Protective Clothing or Equipment: Apron, boots and other protective clothing necessary to prevent contact. Ventilation: General room ventilation is satisfactory in most cases. Other Precautions: Keep away from children. 2

3 Other Regulatory Controls All Components of the Ink Used in the Product Listed on this MSDS are Listed on: TSCA (Toxic Substance Control Act) Inventory European (EINECS) Inventory CDSL (Canadian Domestic Substance List) Disclaimer of Liability The information contained herein is, to the best of our knowledge and belief, accurate. Since the conditions of handling and use are beyond our control, we assume no liability for the loss or injury resulting from the use of this product or the information herein. All chemicals may present unknown health hazards and should be used with caution. Safe use of the material is the responsibility of the user. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or any other nature are made hereunto with respect to the information contained herein or the product to which the information refers. 3

4 May 3, 2012 Product Code: REC-120 Product Description: Magenta inkjet printing ink Ingredients Ingredient CASE # % OSHA PEL ACGIH TLV Glycol Alcohol Not listed Not listed 2-Butoxyethanol ppm (skin) 25 ppm (skin) Dyestuff (1) 0 15 Not listed Not listed Vehicle: Water Remaining ingredients not considered hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR (1) The identity of the dye is considered proprietary by the original manufacturer. This dye is not regulated under the OSHA Hazard Communication Standard, 29 CFR or SARA Title III. Chemical Characteristics Boiling Point: Approx. 100 C. Melting Point: Not applicable (Aqueous solution). Vapor Pressure: Approx Specific Gravity: Approx gm/cm 3 Vapor Density (Air = 1): Approx gm/cm 3 Freezing Point: Lower than water (>0 C). Solubility in Water: Miscible in water. ph: 4.6 +/- 25 C Fire and Explosion Hazard Data Flash Point: Not applicable as mixture (water based). Volatile Organic Compound (VOC) Content: Not established. UFL: Not established. LFL: Not established. Extinguishing Media: Use media suitable for surrounding fire. Special Firefighting Procedures: None. Unusual Fire and Explosion Hazards: With large amounts, combustion may produce carbon dioxide and toxic carbon monoxide. Material of concern is greatly diluted. 4

5 Reactivity Data Stability: Stable. Conditions to Avoid: None. Incompatibility (Materials to Avoid): Oxidizing agents, reducing agents, strong acids and strong bases. Contact with zinc, magnesium and galvanized metals. Hazardous Decomposition or Byproducts: Combustion may produce carbon dioxide, and toxic carbon monoxide. Hazardous Polymerization: Will not occur. Health Hazard Data Routes of Entry Inhalation: No. Skin: Yes. Ingestion: Yes. Health Hazards (Acute and Chronic): Avoid contact with eyes. May cause eye and skin irritation. Carcinogenicity: None (As defined by OSHA Hazard Comm. Std, 29 CFR ). Signs and Symptoms of Exposure: None. Medical Conditions Generally Aggravated by Exposure: None. Eyes: Flush thoroughly with water. If irritation persists, seek medical help. Skin: Wash with soap and water. Ingestion: Give 1 or 2 glasses of water to dilute then induce vomiting. Get immediate medical attention. NEVER give fluids or induce vomiting if the victim is unconscious or having convulsions. (Product considered to have moderate toxicity.) Precautions for Safe Handling, Use and Control Measures Steps to be taken in Case Material is Released or Spilled: Flush area with water, absorb with inert material and dispose. If vapors or mists are generated wear a NIOSH/MSHA approved organic vapor/mist respirator. Waste Disposal Method: Dispose of in accordance with federal, state/provincial and local regulations. Precautions to be taken in Handling and Storing: Protect from freezing. Protective Gloves: Recommended. Eye Protection: Safety glasses. Other Protective Clothing or Equipment: Aprons, boots and other protective clothing necessary to prevent contact. Ventilation: General room ventilation is satisfactory in most cases. Other Precautions: Keep away from children. 5

6 Other Regulatory Controls All components of the ink used in the products listed on this MSDS are listed on: TSCA (Toxic Substance Control Act) inventory European (EINECS) inventory CDSL (Canadian Domestic Substance List) Disclaimer of Liability The information contained herein is, to the best of our knowledge and belief, accurate. Since the conditions of handling and use are beyond our control, we assume no liability for the loss or injury resulting from the use of this product or the information herein. All chemicals may present unknown health hazards and should be used with caution. Safe use of the material is the responsibility of the user. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or any other nature are made hereunto with respect to the information contained herein or the product to which the information refers. 6

7 May 3, 2012 Product Code: REC-120 Product Description: Yellow inkjet printing ink Ingredients Ingredients CASE # % OSHA PEL ACGIH TLV Glycol Alcohol Not listed Not listed 2-Butoxyethanol ppm (skin) 25 ppm (skin) Dyestuff (1) Not listed Not listed Vehicle: Water Remaining ingredients not considered hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR (1) The identity of the dye is considered to be proprietary by the original manufacturer. This dye does not contain any chemicals subject to the reporting requirements of SARA Section 313. Chemical Characteristics Boiling Point: Approx. 100 C. Melting Point: Not applicable (Aqueous solution). Vapor Pressure: Approx Specific Gravity: Approx gm/cm 3 Vapor Density (Air = 1): Approx gm/cm 3 Freezing Point: Lower than water (>0 C) Solubility in Water: Miscible in water. ph: 7.0 +/- 25 C Fire and Explosion Hazard Data Flash Point: Not applicable as mixture (water based) Volatile Organic Compound (VOC) Content: Not established. UFL: Not established. LFL: Not established. Extinguishing Media: Use media suitable for surrounding fire. Special Fire Fighting Procedures: None. Unusual Fire and Explosion Hazards: With large amounts, combustion may produce carbon dioxide and toxic carbon monoxide. Material of concern is greatly diluted. 7

8 Reactivity Data Stability: Stable. Conditions to Avoid: None. Incompatibility (Materials to Avoid): Oxidizing agents, reducing agents, strong acids and strong bases. Contact with zinc, magnesium and galvanized metals. Hazardous Decomposition or Byproducts: Combustion may produce carbon dioxide, and toxic carbon monoxide. Hazardous Polymerization: Will not occur. Health Hazard Data Routes of Entry Inhalation: No. Skin: Yes. Ingestion: Yes. Health Hazards (Acute and Chronic): Avoid contact with eyes. May cause eye and skin irritation. Carcinogenicity: None (as defined by OSHA Hazard Comm. Std. 29 CFR ). Signs and Symptoms of Exposure: None. Medical Conditions Generally Aggravated by Exposure: None. Eyes: Flush thoroughly with water. If irritation persists, seek medical help. Skin: Wash with soap and water. Ingestion: Give 1 or 2 glasses of water to dilute then induce vomiting. Get immediate medical attention. NEVER give fluids or induce vomiting if the victim is unconscious or having convulsions. (Product considered to have moderate toxicity.) Precautions for Safe Handling, Use and Control Measures Steps to be taken in Case Material is Released or Spilled: Flush area with water, absorb with inert material and dispose. If vapors or mists are generated wear a NIOSH/MSHA approved organic vapor/mist respirator. Waste Disposal Method: Dispose of in accordance with federal, state/provincial and local regulations. Precautions to be taken in Handling and Storing: Protect from freezing. Protective Gloves: Recommended. Eye Protection: Safety glasses. Other Protective Clothing or Equipment: Apron, boots and other protective clothing necessary to prevent contact. Ventilation: General room ventilation is satisfactory in most cases. Other Precautions: Keep away from children. 8

9 Other Regulatory Controls All Components of the Ink Used in the Products listed on this MSDS are listed on: TSCA (Toxic Substance Control Act) Inventory European (EINECS) Inventory CDSL (Canadian Domestic Substance List) Disclaimer of Liability The information contained herein is, to the best of our knowledge and belief, accurate. Since the conditions of handling and use are beyond our control, we assume no liability for the loss or injury resulting from the use of this product or the information herein. All chemicals may present unknown health hazards and should be used with caution. Safe use of the material is the responsibility of the user. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or any other nature are made hereunto with respect to the information contained herein or the product to which the information refers. 9