Maleic anhydride grafted of Acrylonitrile butadiene styrene.

Transcription

1 April 14, 2005 MATERIAL SAFETY DATA SHEET. 1. Chemical product and company identification. Chemical product name: BONDYRAM BONDYRAM 6000 Manufacturer: Polyram Ram-On Industries M.p. Megido Israel Emergency number: Composition/information on ingredients. Chemical nature of the preparation. Maleic anhydride grafted of Acrylonitrile butadiene styrene. Hazardous ingredients Declaration not compulsory. 3. Hazard identification at high temperature Thermal decomposition giving toxic products. 4. First aid measures. If vapor is inhaled remove person to fresh air and keep him warm. If necessary summon physician. Burns caused by molten material require hospital treatment.

2 On contact with eyes: Wash effected eyes for at least 15 minutes under running cold water with eyelids held open. Consult an ophthalmologist. On ingestion: No special measures necessary. Note to physician. 5. Fire fighting measures. Suitable extinguishing media: water, foam and dry chemical. Unsuitable extinguishing media for safety reasons: none. Special protective equipment: in case of fire, wear a self contained breathing apparatus. Further information: dispose of fire debris and contaminated extinguishing water in accordance with local regulations. 6. Accidental release measures. Methods for cleaning up: after spillage / leakage / gas leakage sweep / shovel up to prevent slipping. 7. Handling and storage. Handling Gaseous products of degradation can be given off if the product is greatly overheated: monomer other degradation producer. Avoid inhalation of vapor. Processing machine must be fitted with local exhaust ventilation. Protection against fire and explosion: No special measures necessary provided Product is used correctly. During operation containers should be

3 earthed against electrostatic charge. Storage: Keep in dry place.8. Exposure control / personal protection. Additional information on the layout of technical plant see section 7. Control parameters - exposure limits Dusts: France 1999 : VME = 10 mg./m ³ USA - ACGIH 1998 TLV-TWA = 10 mg/m 3 Given suitable ventilation, it can be assumed that the threshold limits will not be reached. Personal protective equipment Respiratory protection : none. Hand protection : none. Body protection : none. General safety and hygiene measures: see section Physical and chemical properties. Form: granules Color : natural Odor low Decomposition temperature > 280 Cº Fire promoting properties : none. Density (20 Cº) g/cm 3

4 Bulk density 500 kg/m 3 Solubility in water: insoluble (20 Cº) Solubility in other solvents: insoluble (20 Cº)) 10. Stability and reactivity. Conditions to avoid: To avoid thermal decomposition do not overheat. Avoid temperatures above 280 Cº Substances to avoid: Fire may produce irritating gases and dense smoke products. The product is stable at ambient temperature. Hazardous reactions: No hazardous reactions observed. 11. Toxicological information. Acute toxicity: no data available. Insoluble: in water. Additional information: In our experience and according to information available to us the product is not harmful to health provided it is correctly handled and processed according to given recommendations. 12. Ecological information: Elimination information No data available, insoluble in water. Behavior and environmental fate Due to the consistency of the product and it's insolubility in water, it will apparently not be bio available.

5 Exotoxic effects Due to the consistency of the product, dispersion into the environment is possible, therefore no negative effects on the environment may be anticipated based on the present state of knowledge. 13. Disposal considerations. Product: must be dumped or incinerated in accordance with local regulations. Disposal code no. For unused product: (Germany). 14. Transport information. Not classified as hazardous under transport regulations. 15. Regulatory information Labeling according to EEC directives No subject to labeling. 16. Other information All chemical constituents are listed in: TSCA. CAS No :

6 The information contained herein is based on the present state of our knowledge, and does not therefore guarantee certain properties recipients of out product must take responsibility for observing existing laws and regulations.