SAFETY DATA SHEET FOR LIPPRITE
|
|
- Bruno Williamson
- 5 years ago
- Views:
Transcription
1 FOR LIPPRITE (NONWOOVEN ABRASIVE TOOLS) Revision: 03 01/03/ IDENTIFICATION Company: Address: Person Responsible/Dept.: Contact: Osborn Unipol Lda. Rua de Pardelhas, Brito, Guimarães Liliana Freitas / Tec. Dept liliana.freitas@osborn-unipol-pt 0.2 IMPORTANT NOTICE LIPPRITE are inert products made of abrasive nonwoven filaments including abrasives and synthetic bonding. The described abrasive tools are non-hazardous materials or preparations per EU directive 88/379 and do not create any risk during handling or storage. When used on grinding machines special safety precautions are necessary to protect the user. The dust arising is largely created by the stock removal and the abrasive composition applied. Sufficient extraction must be installed. 1 PRODUCT DESCRIPTION LIPPRITE 2 COMPOSITION / COMPONENTS 2.1 Nonwoven Abrasives: PA 6.6 resp. PA 6.12, 70% - 80% Silicon Carbide [SIC] 20% - 30% 2.2 Impregnation: Alternative Aluminum Oxide [AL2O3] 20% - 30% Hardened natural resin and oil Dried and inert synthetic resin / water emulsion Without impregnations
2 3 POSSIBLE HAZARDS Firefighting hazards as section 5 below. Not applicable since abrasive tools are not dangerous materials or preparations per EU directive 88/379 EWG. 4 FIRST AID PROCEDURES ONLY APPLICABLE TO LIPPRITE WHEN USED ON GRINDING MACHINE. Following recommendations are fundamental rules with respect to dust and other particles emitted during the grinding operation. They must be heeded as well as the information in the safety data sheets relating to the material to be ground and the cooling lubricant used. After inhaling dust: After eye contact: After skin contact: After swallowing: Leave the danger zone and if the symptoms persist seek medical assistance. Leave the danger zone and rinse eyes with clean water, seek medical assistance if the symptoms persist. No known health hazards. No known health hazards. 5 FIRE PROTECTION MEASURES Suitable extinguishing media: water, extinguishing powder, extinguishing foam, sand, CO 2, depending on the conditions, special attention must be given to re-ignition. Exposure hazards: In case of fire, toxic gases may be released in the course of decomposition and combustion. Decomposed products can include carbon dioxide, carbon monoxide, trace formaldehyde and elements of decomposition. 6 PROCEDURES IF FUMES ARE RELEASED Protective equipment for fire-fighters: Full emergency equipment with self-contained breathing apparatus must be worn. 7 HANDLING AND STORAGE Not applicable: Storage: Clean /dry environment. Protect from open flames or sparks. 2/5
3 8 EXPOSURE LIMITATION / PERSONAL PROTECTION NOT APPLICABLE TO HANDLING AND STORING ABRASIVE TOOLS. When in use dust is to be expected, suitable precautions for extraction must be taken (max. value for fine dust 6 mg/m³). When using LIPPRITE, observe the instructions with the scrubbing machine and the relevant domestic guidelines. Observe recommended running speed. 8.1 Personal Protection 8.2 Eye protection: Protection from dust: Hand protection: Hearing protection: Skin protection: Hygiene measures: Use safety glasses. Wear dust mask. Not applicable but the use of protective gloves is recommended As per directives. As per directives. No special guidelines. 9 PHYSICAL AND CHEMICAL FEATURES Solid matter: Color: Smell: Firm. SiC = grey AL2O3 = brown Natural or colored by impregnation. Impregnated with natural oils and resins, slight smell ph Value: Density: Ignition point: Self-ignition point: Depends on product. Approx. 400ºC. Not applicable for LIPPRITE but for greasy grinding dust. 9.8 Solubility in water: Additional information: Not soluble. These materials are multi component bonded fiber abrasive fabrics, not chemicals. Therefore most clauses above are not relevant. 3/5
4 10 STABILITY AND REACTIVITY 10.1 Conditions to be avoided Extreme heat: Damp: Thermal decomposition begins at approx. 200ªC. Tools with nylon or PVC core; Danger of rotting Materials to be avoided: Strong acids and bases, strong oxidants and solvents that could change the mechanical features of the LIPPRITE create danger when used on a finishing machine. Dangerous decomposition products: None if used for specified purpose. 11 DETAILS ON TOXICOLOGY If used correctly and as directed finishing tools carry no known health risks. Suitable measures must be taken to limit grinding dust (refer to paragraph 8). 12 DETAILS ON ECOLOGY 12.1 Mobility: When LIPPRITE are used on stationary machines, grinding dust will be collected by suitable extractors, when used on manual machines, and suitable protective hoods are required Resistance and degradability: Abrasive tools are degradable Bio accumulation potential: Eco toxicity: 13 ADVICE ON DISPOSAL According to national and local instructions. Depending on the application the LIPPRITE may be contaminated with dangerous materials or chemicals i.e. particles from the material processed or the cooling lubricant, therefore special treatment may be necessary. 4/5
5 14 TRANSPORT LIPPRITE are non-hazardous goods. Protect LIPPRITE from rain and extreme temperatures. Ensure that LIPPRITE tools are not damaged in any way so that they may break when under load in an application. 15 REGULATIONS EU regulations: None also not necessary to record according to EU directives 88/379 ENG. If necessary pay attention to national or local regulations. 16 OTHER DETAILS The details given are based on our present level of knowledge and experience. The safety data sheet describes the products with respect to safety requirements. These details are not to be considered as a guarantee. The new safety data sheet was arranged due to the changed requirements of the REACH regulation. This is a non-controlled copy whereby Osborn Unipol Lda. is not required to distribute any update made on this document. 5/5
GHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1562 Nomex Honeycomb, 1.8 lb. FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE: (937)
More informationMATERIAL SAFETY DATA SHEET. Leather Floating Floors
MATERIAL SAFETY DATA SHEET Date Prepared October 09, 2008 Identification Product Name: Supplier Name: Leather Floating Floors TORLYS Inc., 1900 Derry Road East, Mississauga, Ontario L5S 1Y6 Ph: 800 461-2573
More informationSAFETY DATA SHEET VT-462(L) / VT-462S / VT-462S(LK) According to Regulation (EC) No 1907/2006, Annex II, as amended by Regulation (EU) No 453/2010
SAFETY DATA SHEET According to Regulation (EC) No 1907/2006, Annex II, as amended by Regulation (EU) No 453/2010 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product
More information2 Hazards identification
Page 1/5 * 1 Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier 1.2 Relevant identified uses of the substance or mixture and uses advised against Application
More informationSAFETY DATA SHEET in accordance with 29 CFR and ANSI standard Z Rx - Flexible Foam Material number 006Rx
Page: 1 of 6 Product identifier Trade name: 1. Product and company identification Relevant identified uses of the substance or mixture and uses advised against General use: Article for orthopedic procedures:
More informationPOLYPIPE BUILDING PRODUCTS LTD MATERIAL SAFETY DATA SHEET. Polypipe Building Products High Density Polyethylene (HDPE) Pipe
Page: 1 of 5 1: IDENTIFICATION OF THE SUBSTANCE / MIXTURE 1.1 Product Identity Product Name: Polypipe Building Products High Density Polyethylene (HDPE) Pipe 1.2 Relevant Identified Uses: Recommended use:
More informationSAFETY DATA SHEET. : Blended material : YGC01 : YGC Agar. No additional information available. Unit 1B Hunstanton Commercial Park Norfolk PE365JQ
Page : 1 SECTION 1 Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Identification of the product Product code Trade name : Blended material : : YGC Agar 1.2.
More informationMevastatin - MATERIAL SAFETY DATA SHEET
Mevastatin - MATERIAL SAFETY DATA SHEET Version 2.0 Revision Date 09/01/2010 1. SUBSTANCE IDENTITY AND COMPANY CONTACT INFORMATION Product Name Product Number Procedure Brand Mevastatin M004 Mevastatin
More information: Presto Neutral Deodorant Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 02/09/2018 Revision date: 04/15/2015 : Mixture Product code : 1273-132 1.2. Recommended use and restrictions on use
More informationVoluntary product information based on the format of a safety data sheet for coated abrasives
page 1 of 6 Voluntary product information based on the format of a safety data sheet for coated abrasives 1. Identification of the product and of the company/undertaking 1.1 Product identifier Semiflexible
More informationMSDS Material Safety Data Sheet
VINYL FLOATING FLOOR MSDS Material Safety Data Sheet This Material Safety Data Sheet (MSDS) applies to all CORKART Vinyl Floating Floor products in planks or tiles. 1. IDENTIFICATION OF PRODUCT AND COMPANY
More informationTara Materials, Inc. Safety Data Sheet. Recommended use of the chemical and restrictions on use: Medium for signs, banners, and artist applications.
Page 1 of 5 Tara Materials, Inc. Safety Data Sheet Revision Date: 3/18/16 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Taracloth Sign and Banner Canvas Product Number: Brand: Fredrix Product Form:
More informationCOMPANHIA INDUSTRIAL DE RESINAS SINTÉTICAS, CIRES, LDA. Fundada em 1960 SECTION 1: IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY
SECTION 1: IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY 1.1. Product identifier Chemical names: Polyvinyl chloride, PVC Trade names: VICIR E 1270P, E 1271P, E 1280P, E 1570P, E 1970P. CAS No.: 9002-86-2
More informationSAFETY DATA SHEET. : Raw material : AGA01 AGA04 : Agar : No additional information available
Page : 1 AGA01 - AGA04 SECTION 1 Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Identification of the product Product code Trade name CAS number : Raw material
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 Loctite 5926 Page 1 of 6 sds no. : 165213 Revision: 16.07.2012 printing date: 02.01.2013 SECTION 1: Identification of the substance/mixture and of the company/undertaking
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 11/11/2015
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 11/11/2015 : Mixture : Product code : 2019-2153 1.2. Relevant identified uses of the substance or mixture and uses
More informationSafety Data Sheet Bokundo Marbling Dye Kit
Bokundo Marbling Dye Kit Revision: Number 8 Date 26 April 2017 SECTION 1 Product & Supplier Identification Product Name Bokundo Marbling Dye Kit Other Names Marbling Ink Product Code EC1033 Recommended
More information: Non-Woven Flat Stock & Surface Conditioning Products-AO Only
Non-Woven Flat Stock & Surface Conditioning Products-AO Only SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Non-Woven Flat Stock
More informationMaterial Safety Data Sheet Canon CLI-526 Yellow
Page 1 of 5 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product: ink used to fill Canon CLI-526 YL reman cartridge Supplier: Supplies Team Address: Sheffield Airport Business Park, Europa Link, Sheffield,
More informationMaterial safety data sheet Complying the (CE) 1907/2006 (REACH) regulation
Version 1.0 Revision Date 11.12.2012 page 1/6 1 Product/preparation and Company/Undertaking identification Product information Commercial product code : Application : Manufacturing of plastic molded parts
More informationSAFETY DATA SHEET BRONZE PUTTY RESIN
SAFETY DATA SHEET 1. Identification Product identifier Product name Product number X0003 Recommended use of the chemical and restrictions on use Application Resin. Details of the supplier of the safety
More information2.1 Classification of the substance or mixture The substance is not classified as hazardous according to the Globally Harmonized System (GHS)
Section 1: 1.1 Product identifier Identification Product Name: Silicon Carbide Article number: No other identifiers CAS number: 409-21-2 1.2 Recommended use and Restriction on use Recommended use: Media
More information: Perma Gloss Floor Finish
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 02/09/2018 Revision date: 04/15/2015 : Mixture Product code : 1273-1023 1.2. Recommended use and restrictions on use
More informationProduct SDS. Purpose of product: To provide a pass/fail detection of cavitation energy within an ultrasonic bath.
01. Identification of the substance/mixture and of the company Product name: SonoCheck Code number(s): TI108 Purpose of product: To provide a pass/fail detection of cavitation energy within an ultrasonic
More informationSAFETY DATA SHEET INSULCAST RTVS 27 LV GRAY PT A
SAFETY DATA SHEET 1. Identification Product identifier Product name Recommended use of the chemical and restrictions on use Application Casting compound Details of the supplier of the safety data sheet
More informationSAFETY DATA SHEET. Version 1 Revision Date 1/4/2018 Print Date 1/7/2016. Mold Platen Insulation
Version 1 Revision Date 1/4/2018 Print Date 1/7/2016 SECTION 1: IDENTIFICATION Product Name: Other/ Generic Names: MPI Mold Platen Insulation Manufacturer or supplier s details Company The Gund Company,
More information: Cleaners, liquids (all purpose cleaners, sanitary products, floor cleaners, glass cleaners, carpet cleaners, metal cleaners)
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/16/2018 Revision date: 03/16/2016 : Mixture : Product code : 2019-2152 1.2. Recommended use and restrictions on
More informationAnimal feed supplement. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): DICALCIUM PHOSPHATE DCP; Phosphoric acid, calcium salt (1:1); Calcium phosphate dibasic. Recommended Use of the Chemical and
More informationSafety data sheet GLENIUM 3030 NS Revision date : 2009/03/30 Page: 1/5
Revision date : 2009/03/30 Page: 1/5 1. Substance/preparation and company identification Company BASF Construction Chemicals 100 Campus Drive Florham Park, NJ 07932 24 Hour Emergency Response Information
More informationEXPANDABLE GRAPHITE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: EXPANDABLE GRAPHITE Recommended Use of the Chemical and Restrictions on Use Man-made graphite. Supplier: Ixom Operations Pty Ltd ABN: 51 600
More informationSafety Data Sheet (SDS) ARCOR EE-94HW ACTIVATOR
Safety Data Sheet (SDS) ARCOR EE-94HW ACTIVATOR ChemTel ERS / MOD Tel US: 800-255-3924 Outside US: +001-813-248-0585 1. Identification of the Substance/Preparation and Company/Undertaking Product Manufacturer:
More information: Enzyme Drain Opener
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture : Product code : 2050-7010 1.2. Relevant identified uses of the substance or mixture and uses
More informationSAFETY DATA SHEET. GHS Label Elements: The product does not require a hazard warning label in accordance with GHS criteria.
Page: 1 SAFETY DATA SHEET SECTION 1 Product and Company Identification Product Product Name: Basalt Fiber and Rods Product Description: Basalt structural rods and fibers Intended Use: Reinforcing XS products
More informationSafety Data Sheet Lyden Oil Company
Page 1 of 7 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 08/13/2015 Common Name: Hydrotreated Heavy Paraffinic Oil CAS Number: Blend Product Code: 18006 Synonyms: Antiwear Hydraulic Fluid
More informationVoluntary product information based on the format of a safety data sheet for coated abrasives
page 1 of 6 Voluntary product information based on the format of a safety data sheet for coated abrasives 1. Identification of the product and of the company/undertaking 1.1 Product identifier 942E all
More informationSafety data sheet NAVITAS 33 Revision date : 2009/03/26 Page: 1/5
Revision date : 2009/03/26 Page: 1/5 1. Substance/preparation and company identification Company BASF Construction Chemicals 100 Campus Drive Florham Park, NJ 07932 24 Hour Emergency Response Information
More informationSAFETY DATA SHEET. Print Date: 6/18/2015 Revision Date: 6/18/ Industrial Park Rd Columbia, TN (931) Phone (931) Fax
SAFETY DATA SHEET Print Date: 6/18/2015 Revision Date: 6/18/2015 1. IDENTIFICATION Product Description Trade Name Product # Supplier Contact Gloss Clear TGIC S1799014 Columbia Coatings 1173 Industrial
More informationMaterial Safety Data Sheet
Material Safety Data Sheet acc. to OSHA and ANSI Printing date 09/22/2004 Reviewed on 09/02/2004 1 Identification of substance: Product details: Product name: Aluminum stearate Stock number: 39125 Manufacturer/Supplier:
More informationSafety data sheet PLA
Safety data sheet PLA 1. Identification of the substance/preparation and of the company 1.1 Trade name PLA 1.2 Use of the product 3DPrinter filament 1.3 Supplier Ultimaker (Watermolenweg 2, 4191PN, Geldermalsen,
More information1.1 Product identifiers Chemical name: S-2-(4-Isothiocyanatobenzyl)-diethylenetriamine pentaacetic acid
macrocyclics.com SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Chemical name: S-2-(4-Isothiocyanatobenzyl)-diethylenetriamine pentaacetic acid Synonym: p-scn-bn-dtpa Product
More informationSAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking. No data available. May irritate eyes.
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking GeoSpray AMS Corrosion Resistant GeoPolymer System Post Coat Liquid Product identifier: Product name:
More informationTrio Diamonds Gelling and Odour Control Sachets
Revision 3 Date 19 October 2011 SAFETY DATA SHEET Trio Diamonds Gelling and Odour Control Sachets This Safety Data Sheet contains information concerning the potential risks to those involved in handling,
More informationSafety data sheet pursuant to ordinance (EC) No. 453/2010 (EC) No. 1907/2006 (REACH)
Print date: 02/03/2016 Page 1 1. DESIGNATION OF THE MATERIAL OR MIXTURE AND COMPANY NAME 1.1 Product identifier Product name Trade name CAS No. EC No. Lead-free electronic solder Art. No. 150152/150154/150156/150158/150162/150164
More informationSafety Data Sheet. Date prepared: Jan 25, 2016 Revision: Product and Company Identification
1. Product and Company Identification Product Name: HYDRO KLEEN HAND SANITIZER Synonyms: None Recommended Use: HAND SANITIZER Uses Advised Against: No information available Supplier information: Productive
More information: Focus LD 121 Laundry Detergent
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 2105-2109 : 1.2. Relevant identified uses of the substance or mixture and uses
More informationSAFETY DATA SHEET COCOA BUTTER ORGANIC REFINED
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product number Synonyms; trade names CAS number Alternative Cas
More informationSAFETY DATA SHEET NEOPRENE SHEET, NEOPRENE ROLLS, NEOPRENE STRING, NEOPRENE SHAPES
Revision Date 07-2012 Revision 1 Supersedes date 12-2009 SAFETY DATA SHEET According to Regulation (EU) No 453/2010 SECTION 1: IDENTIFICATION OF THE SUBSTAE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1.
More informationSafety Data Sheet Face and Body Crayons
Face and Body Crayons Revision: Number 1 Date 1 May 2017 SECTION 1 Product & Supplier Identification Product Name Face and Body Crayons Other Names Product Code FBC3 & FBC6 Barcode Number Recommended Use
More informationSafety Data Sheet MasterFiber M 70 also MasterFiber M70 Revision date : 2012/04/25 Page: 1/5
Revision date : 2012/04/25 Page: 1/5 1. Product and Company Identification Company BASF Canada Inc. 100 Milverton Drive Mississauga, ON L5R 4H1, CANADA 24 Hour Emergency Response Information CANUTEC (reverse
More informationSafety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH)
Revision date: 01.06.2015 Version (Revision): 1.3.9 (1.2.8) SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier 1.2 Relevant identified uses of the
More informationPrint date: Page 1 of 5. SECTION 1: Identification of the substance/mixture and of the company/undertaking
Print date: 25.08.2016 Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier 1.2. Relevant identified uses of the substance or mixture and
More informationTrio Silesse Skin Barrier Wipe Solution
SAFETY DATA SHEET Trio Silesse Skin Barrier Wipe Version 3.0 Date 15 November 2007 This Safety Data Sheet contains information concerning the potential risks to those involved in handling, transporting
More informationMSDS DATA SHEET Industrial Park Rd Columbia, TN (931) Phone (931) Fax
MSDS DATA SHEET 1. IDENTIFICATION OF SUBSTANCES Product Description Trade Name Product # Supplier Contact RAL 9006 White Aluminum RAL RAL9006 Columbia Coatings 1173 Industrial Park Rd Columbia, TN 38401
More informationMaterial Safety Data Sheet 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: OZTRADE GAP FILLER Flexible acrylic sealant for interior/exterior use in joints, gaps or cracks in most building situations.
More informationSAFETY DATA SHEET according to Regulation (EG) no 1907/2006 Generic EU MSDS No country specific data REVISION DATE:
SAFETY DATA SHEET according to Regulation (EG) 1907/2006 Generic EU MSDS No country specific data REVISION DATE: 2014-03-19 1. Identification of the substance/mixture and of the company/undertaking 1.1
More informationSafety Data Sheet. (Copaiba Oil) Copaiba Oil DATE PREPARED: 1/7/2016. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Copaiba Oil Product Name CAS Number 8013-97-6 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
More informationEnewall Acrylic Render
MATERIAL SAFETY DATA SHEET 1. Identification of the Substance / Preparation and Company / Undertaking Product Expected use Product Codes Company name ENEWALL ACRYLIC RENDER Plaster for External Wall Insulation
More informationProduct name: EM-Tec bell jar polish for glass bell jars Date: December 3rd 2015 Document Nr.: SDS Version: 1.0
Section 1: Identification of the substance or mixture and the company 1.1. Product Identifier Name: #53-000200 EM-Tec bell jar polish for glass bell jars 1.2 Relevant applications of the material and uses
More informationSafety Data Sheet Lyden Oil Company
Page 1 of 7 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 09/01/2015 Common Name: Hydrotreated Heavy Paraffinic Oil CAS Number: Blend Product Code: 17899 Synonyms: Petroleum based lubricant,
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 04/15/2015
Revision date: 04/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Product code : 565-4311 1.2. Relevant
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 LOCTITE LB 8104 1L EGFD Page 1 of 7 SDS No. : 283261 Revision: 26.05.2015 printing date: 06.11.2015 Replaces version from: 10.10.2013 SECTION 1: Identification
More informationMaterial Safety data sheet according to EU regulation Nr. 453/2010
Article 1: Identification of the substance and the company 1.1 Product identifier Trade name PAVADRY 1.2 Product description Fibreboard for the internal insulation of exterior walls, coated with a layer
More informationSafety Data Sheet according to Regulation (EC) No 1907/2006
Safety Data Sheet according to Regulation (EC) No 1907/2006 LOCTITE SI 5926 BL known as Loctite 5926 40ml Fr/Nl Page 1 of 8 sds no. : 165213 Revision: 30.09.2013 printing date: 20.02.2015 SECTION 1: Identification
More informationLubricant, personal hygiene, stabiliser Browns Road Noble Park, Victoria 3174
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: STEARIC ACID Recommended Use of the Chemical and Restrictions on Use Lubricant, personal hygiene, stabiliser. Supplier: MARPLEX AUSTRALIA PTY
More informationGRAPHITE (ALL GRADES)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: GRAPHITE (ALL GRADES) Other name(s): Carbon raiser * Grozier's graphite 177 * Graphite GP65 * Graphite A65R * GRAPELL-20 * GRAPELL-1000 * Recarburiser
More informationMadison Chemical Co., Inc.
Madison Chemical Co., Inc. NAME: TYPE: Lubricant PRODUCT # 771121 EMERGENCY RESPONSE INFORMATION: CHEMTREC Company Offices: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION MadBrew DRY LUBE FOR INDUSTRIAL
More information: Formedium Ltd. Unit 1B Hunstanton Commercial Park Norfolk PE365JQ Tel: +44(0) Fax: +44(0)
Page : 1 SECTION 1 Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Identification of the product Product code Trade name : Raw material : : Potato Extract
More informationSafety data sheet PP. 1. Identification of the substance/preparation and of the company
Safety data sheet PP 1. Identification of the substance/preparation and of the company 1.1 Trade name 1.2 Use of the product 1.3 Supplier Emergency phone number PP 3DPrinter filament Ultimaker (Watermolenweg
More information1. Product And Company Identification
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Ultra Shine Wash & Wax Detailer Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
More information: Focus GC 55 Glass & Window Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 155-2102 : 1.2. Relevant identified uses of the substance or mixture and uses
More informationSafety Data Sheet Lyden Oil Company
Page 1 of 7 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 08/12/2015 Common Name: CAS Number: Blend Product Code: 17961 Synonyms: Automatic Transmission Fluid, Petroleum based lubricant
More informationSAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification
Page: 1 Compilation date: 12/07/2016 Revision No: 13 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Product code: 307402 1.2. Relevant
More informationSAFETY DATA SHEET. 1. Identification of the substance or preparation and the company/ undertaking. In vitro diagnostic product; Laboratory chemical
1. Identification of the substance or preparation and the company/ undertaking 1.1 Product Identifier Product Name: Product Code: DNase Agar DM132 series 1.2 Relevant identified uses of the substance or
More informationSAFETY DATA SHEET PLA
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY 1.1 Trade name 1.2 Use of the product 1.3 Supplier Emergency phone number Polylactic acid (PLA) 3DPrinter filament Ultimaker (Watermolenweg
More informationMATERIAL SAFETY DATA SHEET
Section 1. Product and Company Identification Product Name: DUO Eyelash Adhesive - Clear DATE: 12/2/2013 Formula: 87-5741; 87-5743 REV. 03 Item#: Manufacturer: 568034 American International Industries
More informationMATERIAL SAFETY DATA SHEET Page 1 of 7 Klinger Milam PSS
MATERIAL SAFETY DATA SHEET Page 1 of 7 1 - IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name Other Names Klinger Mica Laminate Recommended Use High temperature gasket material Supplier KLINGER Limited
More informationColorfabb ngen filament
1. IDENTIFICATION OF THE SUBSTANCE AND THE COMPANY 1.1 Identification of the substance or preparation: ColorFabb ngen filament; all available colors. 1.2 Use of the substance or preparation: FDM 3D printing
More information1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Air Freshening Protectant Pure Linen Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
More information: GC 55 Glass & Window Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 155-2102 : 1.2. Relevant identified uses of the substance or mixture and uses
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 03/16/2016
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 03/16/2016 : Mixture : Product code : 2019-21526X 1.2. Relevant identified uses of the substance or mixture and uses
More information1.2 Relevant identified uses of the substance or mixture and uses advised against
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY 1.1 Product identifier Product Name: Calcium Liquid 1.2 Relevant identified uses of the substance or mixture and uses advised against Liquid
More informationMaterial safety data sheet Complying the (CE) 1907/2006 (REACH) regulation
Version 1.0 Revision Date 11.12.2012 page 1/6 1 Product/preparation and Company/Undertaking identification Product information Commercial product code Application : : Manufacturing of plastic molded parts
More informationSAFETY DATA SHEET. This SDS complies with REACH 1907/2006 and 2001/58/EC, GHS, OSHA 29CFR
SAFETY DATA SHEET This SDS complies with REACH 1907/2006 and 2001/58/EC, GHS, OSHA 29CFR 1910.1200 Section 1: Chemical Product and Company Identification MANUFACTURER S NAME EMERGENCY TELEPHONE Isola Group
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 1 Loctite All Purpose Adhesive SDS no. : 322018 Revision: 23.07.2008 printing date: 06.01.2010 1. Identification of the substance/preparation
More information1. Product And Company Identification
1. Product And Company Identification Product Name: Responsible Party: STP Son of a Gun Protectant Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies, call 1-866-949-6465
More informationVoluntary product information based on the format of a safety data sheet for foam abrasives
Revised: (06/01/2015) page 1 of 5 Voluntary product information based on the format of a safety data sheet for foam abrasives 1. Identification of the product and of the company/undertaking 1.1 Product
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product Name Zinc Benzoate NO. 553-72-0 1.2 Relevant identified uses of the substance
More informationSafety Data Sheet Lyden Oil Company
Page 1 of 8 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 07/01/2018 Common Name: Synthetic Drawing and Stamping Fluid CAS Number: Blend Product Code: 807031 Synonyms: N/A Company Identification:
More information1. Product And Company Identification
1. Product And Company Identification Product Name: Responsible Party: ARMOR ALL Extreme Tire Shine (Spray) Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies, call
More informationSafety Data Sheet Lyden Oil Company
Page 1 of 8 1 PRODUCT AND COMPANY INFORMATION Product Name: Revision Date: 08/22/2016 Common Name: Metalworking Fluid CAS Number: Blend Product Code: 07168-AB Synonyms: Lubricant, Coolant, Metalworking
More information12-HYDROXYSTEARIC ACID. Lubricant and chemical intermediate (ALL HOURS)
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): Recommended use of the chemical and restrictions on use: 12-HYDROXYSTEARIC ACID 12-Hydroxyoctadecanoic acid (All grades) Lubricant
More informationBased on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Recommended Use: PRO-SPEC FLEXI-FILL ACRYLIC SEALANT - Interior/exterior flexible gap sealant. Supplier: Selleys Australia, a division of DuluxGroup
More informationSafety Data Sheet Sludge Reducer
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifiers Product Name : Sludge Reducer Synonyms : Vitastim Egg Product Form : Dry Powder 1.2 Relevant identified uses of the substance or mixture and
More informationSafety Data Sheet According to Regulation (EC) No. 1907/2006 OSHA Regulation 29 CFR Canadian Regulation SOR/88-66
Revision Date: Reason for Revision: HI 700661 Cleaning Solution SECTION 1: IDENTIFICATION OF THE PRODUCT AND COMPANY Product Name: Application: HI 700661 Cleaning Solution For Agriculture Application Additional
More informationVickers Laboratories Ltd - Safety Data Sheet 1185
Vickers Laboratories Ltd - Safety Data Sheet 1185 (in accordance with regulation 2015/830/EC) Section 1. Identification 1.1 Product Identifier 1185 Product Name LACTIC ACID pure CAS Number 79-33-4 REACH
More informationRevision Date: 7/31/2015 Page 1/5
COOSA BLUEWATER PRODUCT LINES COOSA NAUTICAL PRODUCT LINES SAFETY DATA SHEET Revision Date: 7/31/2015 Page 1/5 Section 1: Product and Company Identification Product Identifier: Trade Name: Bluewater 26,
More informationMaterial Safety Data Sheet
1 Section 1 1145 Sutton Street Howell, MI 48843 Telephone Numbers: (517) 295-4196 Product Information () Transportation Emergency Chemtrec: (800) 424-9300 MATERIAL IDENTIFICATION PRODUCT NAME: LCA PEI
More informationSAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 Version 1.0 Revision Date
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 Version 1.0 Revision Date 02.01.2013 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product name : PLA TRIETHOXYSILANE
More information: Trim-Kut Grinding Disc
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Trim-Kut Grinding Disc 1.2. Relevant identified uses of the substance or mixture
More informationSafety Data Sheet according to 1907/2006/EC. Pelikan Vertriebsgesellschaft mbh & Co. KG
No. 27002 edition 03 from 9.10.2008 Page 1 of 5 1. Identification of the substance/preparation and the company Trade name: Application of the substance/preparation: Moulding material for model constuction
More information