SAFETY DATA SHEET. according to 1907/2006/EC, Article 31. Tanking Paste

Transcription

1 SAFETY DATA SHEET according to 197/26/EC, Article 31 Page 1/5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name 1.2. Relevant identified uses of the substance or mixture and uses advised against Product Use [SU22] Professional uses: Public domain (administration, education, entertainment, services, craftsmen); [SU19] Building and construction work; [PC1] Adhesives, sealants; 1.3. Details of the supplier of the safety data sheet Company Address Web Tilemaster Adhesives Ltd Unit 4, Tomlinson Point Tomlinson Road Leyland Lancashire PR25 2DY Telephone Fax address of the competent person info@tilemasteradhesives.co.uk info@tilemasteradhesives.co.uk 1.4. Emergency telephone number Emergency telephone number am - 5. pm Mon - Fri SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Main hazards No Significant Hazard 2.2. Label elements Risk phrases No Significant Hazard. SECTION 3: Composition/information on ingredients 3.2. Mixtures Aqueous dispersion of a polymer based on: acrylic ester, styrene. Description Aqueous polymer solution. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation Move the exposed person to fresh air. Seek medical attention if irritation or symptoms persist. Eye contact May cause irritation to eyes. Rinse immediately with plenty of water for 15 minutes holding the eyelids open. Seek medical attention if irritation or symptoms persist. Skin contact Wash off immediately with plenty of soap and water. Remove contaminated clothing. Seek medical

2 2/ Description of first aid measures attention if irritation or symptoms persist. Ingestion DO NOT INDUCE VOMITING. Seek medical attention Most important symptoms and effects, both acute and delayed Eye contact Skin contact Ingestion May cause irritation to eyes. May cause irritation to skin. May cause nausea Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Use extinguishing media appropriate to the surrounding fire conditions Special hazards arising from the substance or mixture 5.3. Advice for firefighters Protective equipment. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation of the working area. Wear suitable protective equipment Environmental precautions Do not allow product to enter drains. Prevent further spillage if safe Methods and material for containment and cleaning up For large spills:. Prevent further spillage if safe. Remove mechanically; cover the remainder with wet, absorbent material (e.g. sawdust, chemical binder based on calcium silicate hydrate, sand). After approximately one hour transfer to waste container and do not seal (evolution of CO2!). Dispose of in compliance with all local and national regulations. For small spills:. Prevent further spillage if safe. Absorb with inert, absorbent material. Transfer to suitable, labelled containers for disposal. Dispose of in compliance with all local and national regulations Reference to other sections For PPE refer to Section 8. SECTION 7: Handling and storage 7.1. Precautions for safe handling Wear suitable protective equipment. Adopt best Manual Handling considerations when handling, carrying and dispensing. Avoid contact with eyes and skin. Use in a well ventilated area. For PPE refer to Section Conditions for safe storage, including any incompatibilities Store in original container. Store at temperatures between 5 C and 3 C. Do NOT allow to freeze. Keep away from direct sunlight. Keep away from sources of ignition - No smoking. SECTION 8: Exposure controls/personal protection 8.2. Exposure controls Appropriate engineering Ensure adequate ventilation of the working area. controls Individual protection Wear protective clothing. Wash all contaminated clothing before reuse. measures Eye / face protection Approved safety goggles. safety glasses with side-shields.

3 3/ Exposure controls Skin protection - Handprotection Environmental exposure controls Chemical resistant gloves (PVC). Wash hands after handling the product. Do not allow product to enter drains. Do no eat, drink or smoke when using this product. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State Colour Odour Liquid Blue Characteristic ph Melting point Freezing Point Boiling point Flash point Evaporation rate Flammability limits Vapour Flammability Vapour pressure Vapour density Not relevant Not relevant 23 Pa Relative density 1.2 Fat Solubility Partition coefficient Autoignition temperature Viscosity Explosive Oxidising Solubility 8 mpas (Cone & Plate) Miscible in water 9.2. Other information Conductivity Surface tension Gas group Benzene Content Lead content VOC (Volatile organic compounds) SECTION 1: Stability and reactivity 1.1. Reactivity No hazardous reactions if stored and handled as indicated Chemical stability Stable under normal conditions Possibility of hazardous reactions 1.4. Conditions to avoid Conditions to avoid. Direct sunlight. Do NOT allow to freeze. Store at temperatures between 5 C and 3 C.

4 4/ Incompatible materials No Significant Hazard Hazardous decomposition products Will not decompose if stored and used as recommended. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Carcinogenicity Reproductive toxicity SECTION 12: Ecological information Persistence and degradability Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Do not allow product to enter drains. General information Dispose of in compliance with all local and national regulations. SECTION 14: Transport information The product is not classified as dangerous for carriage. SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture Regulations COMMISSION REGULATION (EU) No 453/21 of 2 May 21 amending Regulation (EC) No 197/26 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/15/EC and 2/21/EC. REGULATION (EC) No 197/26 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 December 26 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/15/EC and 2/21/EC. The data should be considered when making any assessment under the Control of Substances Hazardous to Health Regulations (COSHH), and related guidance, for example, "COSHH Essentials" (United Kingdom). This product is classified under the Chemicals (Hazard Information and Packaging) Regulations, (CHIP) (United Kingdom) Chemical safety assessment

5 5/ Chemical safety assessment A chemical safety assesment according to (EC) regulation 197/26 (REACH) has not been carried out for this product. SECTION 16: Other information The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process.