Rigging. Student Booklet
|
|
- Adrian Merritt
- 5 years ago
- Views:
Transcription
1 Student Booklet Ministry of Education. December The material was developed for Continuing Education Committee for the building / construction industry and in cooperation with lecturer Ole Østergaard Nielsen, AMU West. The material can freely be further worked with the following text: "This material contains a processing of the material "Pipe and industrial scaffolding - Pupil Booklet" in December 2009 developed for the Ministry of Education After building / construction industry and in collaboration with Ole Østergaard Nielsen, AMU West 1
2 2
3 Content Rigger... 5 Responsibilities of the rigger and the crane operator... 5 gear... 6 Maintenance of rigging gear... 7 Scrapping Knots... 8 Bowline... 8 Double half hitch... 8 Double half hitch around own part... 8 Double half hitch with loop... 9 Back hand knot... 9 Timber hitch... 9 Flag knot... 9, assignment number
4 4
5 7.1 As a scaffold worker it is important to rig correctly and use the proper materials, so to be a part of reducing accidents in the work place. Rigger A rigger is anyone who attaches a burden or frees a burden from a crane hook. Only personnel with the proper training and instructions may be used as riggers. The rigger must be 18 years or older. The rigger and the crane operator must work closely together. Responsibilities of the rigger and the crane operator All crane work and all rigging jobs should be prepared for work, and for larger tasks a detailed plan must be devised. rigger and crane operator must deny lifting, if they are not comfortable with the situation the rigger must discard any defect rigging equipment (the crane operator should after the best of his abilities evaluated the quality of the materials) rigger and crane operator must be aware of the weight and the centre of gravity of the burdens that have not been labeled rigger and crane operator must be aware of rigging points on burdens that need to be rigged in a special way the rigger must make sure that the rigging equipment is hitched according to the current regulations upon return riggers should wear a helmet, safety foot wear and if necessary, gloves. 5
6 gear The following rules apply for the use of rigging gear: the gear should be strong enough the gear should be clearly marked with the allowed load (SWL - Safe Working Load, or WLL - Working Load Limit) heavy rigging gear, such as carrying yokes and carrying frames, must be labeled with their respective net weight rigging and releasing should happen comfortably and free of danger the gear must not be sliding in the hook or on the burden during lifts, fishing or setting out special gear should only be used for its special purpose the gear should be kept in good condition in the necessary scale, a Danish instruction manual must be available gear used immersed in sea water may not be galvanized. Wire straps Chains wire straps should be manufactured they should be chosen to match the weight of the burden the allowed load should be written on the lock the eyes of the wire straps should be able to attach to the crane hook during use the wire must not set into a loop, which when tightened will result in a kink. a burdened chain may never be twisted, and there should never be any knots on/in it joints should be made only by approved connecting links. Synthetic fiber straps Straps made from synthetic fiber should not be used when: there is a danger of quick ware, there is a danger of thermal stress, there is strong ultraviolet light, there is a danger of severe cold. 6
7 Maintenance of rigging gear gear must be inspected every time it is used, and at least every 12 months there should be a thorough inspection. rigging gear should be stored in such a way that it is not harmed or soiled (e.g. by sitting on the ground). in the winter it may be necessary to protect the gear exceptionally well. Steel may become brittle and straps may be covered in ice in frosty weather synthetic fiber straps must be kept so that they are not exposed to heavy cold and warmth or direct sunlight all lifting gear should be kept clean so that it is possible to read the allowed load and to check for damages all movable parts of the gear should be cleansed of impurities that may stop the function. Furthermore, they should be greased regularly. Scrapping The supplier s directions for scrapping must be followed. Wire straps must be scrapped when: they have become rusty or corroded, they have become fuzzy ( has lice ), they have been stretched in bends or kinks, and can t be straitened, they have become flattened. Chains should be scrapped when: the thickness of links have been diminished visibly by ware and tare, a link have been stretched out of shape either in length or by bending, the material have become rusty they have been exposed to extreme heat. Hooks should be scrapped when: they are starting to straighten they in some other way have become damaged. Synthetic fiber straps should be scrapped when: a strand has been worn out the rope becomes fuzzy. 7
8 7.2 Knots When tying knots the rope s strength is significantly reduced. Circa % reducement of carrying capacity 0% stretched rope with no knots 7% eye splice over thimble 30% timber hitch 30% double half hitch around own part 40% double half hitch 40% bowline 55% reef knot In the following sketches you will see some examples of knots and hitches that a scaffold builder may be required to use. Bowline The bowline is a hitch often used to create an eye. The advantage of the bowline is that it is relatively easy to loosen. A rookie will often find it hard to learn the bowline, therefore it is recommended to both tie the hitch in the hands and around a pipe. Double half hitch The double half hitch is one of the most common hitches used in scaffolding. By pulling the hitch will tighten and be quite hard to loosen. Double half hitch around own part Double half hitch around own part is commonly used for rigging boats, frapping deck cargo etc. The double half hitch around own part takes up a great deal of the force, which marked the hitch easy to loosen. 8
9 Double half hitch with loop Is used for example on a slick scaffold pipe, when one wants to be sure that the hitch does not slip when a force is attached. Back hand knot Has the same advantages as the half hitch with loop and around own part, but is mainly used to rigging in rings or straps. Timber hitch Cannot be pulled loose as long as the end holds, while taking at least three loops with the rope s end around itself and makes sure that these loops go half way around the object. The hitch will tow itself tighter and tighter the more force there is put on it and it is considered particularly well suited for securing an end tight on a piece of wet and slippery timber. Flag knot A flag knot is used to connect two uneven ends. 9
10 10
11 , assignment number 1 1. What is a rigger? 2. When must hooks be scrapped? 3. What personnel may be used for rigging? 4. When should wire straps be scrapped? 5. How should rigging gear be labeled? 6. When should rigging gear not be galvanized? 7. When should synthetic fiber straps not be 11
12 used? 8. How often should rigging gear be subject to a thorough inspection? 9. How old must one be to work as a rigger? 10. When should chains be scrapped? 11. When should synthetic fiber straps be scrapped? 12
Level Two Green Rope. Clove Hitch
Level Two Green Rope Level Two consists of a combination of two knots (or hitches), all five lashings and the three basic splices. The lashings are essential for pioneering activities and to create camp
More informationEnd. Standing Part. An underhand loop is made by crossing the end under the standing part.
Knot Board Learn to tie the four basic camping knots as illustrated as well as others you might add. Practice them until you can tie them well. Display them on a knot board made from a square of peg board
More information1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment
Orignal Issue Date : 28-10-10 Date of Revision: Page- - 1-1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment (Slings & Ropes) 2.0 Reference: 3.0 Associated
More informationKnots, Hitches and Bends
Knots, Hitches and Bends It is hard to define clearly the terms knot, hitch and bend because their functions overlap. However, the terms may be generally defined as follows: Knots Hitches Bends Knots are
More informationSafety. Student Booklet
Student Booklet Ministry of Education. December 2009. The material was developed for Continuing Education Committee for the building / construction industry and in cooperation with lecturer Ole Østergaard
More informationBANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline?
BANKSMAN / SLINGER 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? A. 16mm B. 10mm C. 12mm 2. What is the maximum temperature that a webbing sling can be
More informationSeamanship. A braided line comprises a core of braided or stranded threads covered with a sheath. The center or core of the line gives strength.
Seamanship 1. Describe the life boat ropes. On a life boat, we rarely use the word rope but rather lines to describe all of the ropes. Moreover, each line has a specific name, such as the painter, halyard
More informationKnots. Some points on ropes:
Knots Knots have been created so that they may perform a certain job effectively. A good knot is easy to tie and just as easy to untie, does not slip under strain and can be relied upon. There are only
More informationKnot Masters Program
The Knot Masters program helps Scouts to learn the knots they need for advancement, Scouters to become proficient in knot tying, and keeps knot tying skills sharp. Scouts and Scouters are encouraged to
More informationOPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Ratings: Able Seafarer Deck
Page 1 of 7 Compiled by Approved by Chief Examiner Syllabus Committee:22 November 2011 OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Ratings: Page 2 of 7 1. Contribute
More informationLOOP KNOTS: A loop knot, like a hitch, fastens a rope to another object. A loop knot may be tied in the hand and then placed over the object, while a
LOOP KNOTS: A loop knot, like a hitch, fastens a rope to another object. A loop knot may be tied in the hand and then placed over the object, while a hitch is tied directly to the object. However, since
More informationRopework. Stopper knots. Overhand Knot ROPEWORK. Figure of Eight 3.
Ropework 1 Ropework Stopper knots Stopper knots are used as a temporary method of stopping a rope from fraying or as a method of locking other knots which maybe prone to lossening. The knots are the Overhand
More informationRopework & Securing Loads
Ropework & Securing Loads Name Description: In this exercise the student will learn to work with rope by tying common knots. Students will demonstrate securing loads with common binders and rope. Materials:
More informationPremium PowerPoint Presentation. Rigging Review
Premium PowerPoint Presentation Rigging Review Chapter 1 Hoisting Safety Review: What about the CG Symmetrical vs. Asymmetrical Balanced and Unbalanced Lifting Lug Hooks Angle Deformation Safety Gates
More informationRopework. Stopper Knots. Overhand Knot ROPEWORK. Figure of Eight 3.
Ropework 157 Ropework Stopper Knots Stopper knots are used as a temporary method of stopping a rope from fraying or as a method of locking other knots which may be prone to loosening. These knots are:
More informationSquare Diagonal Tripod Japanese Square Filipino Diagonal Round Shear Ladder
Square Diagonal Tripod Japanese Square Filipino Diagonal Round Shear Ladder Square Lashing - Step by Step Used to fasten two spars or poles together. Start by crossing the two sticks or dowels at perpendicular
More informationKNOTS. A very short guide to knotting terminology used on these pages.
KNOTS A very short guide to knotting terminology used on these pages. This is not an exhaustive list of knotting terms; it just contains some of the more unfamiliar words that we have used. If you wish
More informationWorker s Safety Handbook for Rigger and Signalman
Worker s Safety Handbook for Rigger and Signalman Contents Preface 3 Proper Attire for Rigger and Signalman 4 Roles and Responsibilities of a Rigger 5 Good and Bad Rigging Practices 12 Inspection of Hooks
More informationRigging Safety. 1 Copyright 2014 by PEC Safety Management, Inc. PPT-SM-RIGGING 2014
Rigging Safety 1 Copyright by PEC Safety Management, Inc. Rigger Role Assist the crane operator by properly attaching and detaching loads the crane Know how to safely connect and disconnect loads Discuss
More informationFall Protection Checklist. Guardrail System
Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the
More information"RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More information04 Practical Seamanship. Captain
04 Practical Seamanship Exhibit elements of basic seamanship RQ RQ Describe Characteristics, construction, advantages and disadvantages of various types of rope Describe the Factors that Affect the Strength
More informationYou may order this publication from WCB Publications and Videos, Please quote ordering number BK60.
The following material is the property of the Workers Compensation Board of British Columbia and may not be reproduced by those outside of B.C. For those within British Columbia, this material may only
More informationInformation Booklet 3
TAKING. IT FURTHER Create lessons to demonstrate and learn how to tie the following knots: Timber hitch Highwayman s hitch Sheepshank Bowline Sheet bend Groups could then build knot boards showing how
More informationSection 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
More informationAHCARB311 Knot Identification Form
Prerequisite competency completion Not applicable. There are no prerequisite requirements. Required forms completion Has the candidate successfully completed the required forms? AQF 3C Risk assessment
More informationKnots for Cavers Knots, Hitches, Bends, and Splices Step By Step Instructions For tying knots for Caving
Knots for Cavers Knots, Hitches, Bends, and Splices Step By Step Instructions For tying knots for Caving Knot Requirements by Slide Edge Color Required Knots Additional Knots Credits The photography and
More informationObjectives (1 of 3) List at least two types of materials and designs used in rope manufacture. Define and describe the following: Dynamic rope Static
Chapter 16 Rescue Objectives (1 of 3) List at least two types of materials and designs used in rope manufacture. Define and describe the following: Dynamic rope Static rope Webbing List at least five rules
More informationKnot Tying Honour Booklet
Knot Tying Honour Booklet Name: Church: Club: Class Due Date: In order to successfully complete this honour, you must: 1. Satisfactorily complete this Booklet. The pass mark is 75%. The number of marks
More informationCORPORATE SAFETY MANUAL
CORPORATE SAFETY MANUAL Procedure No. 32-0 Revision: Date: May 2005 Total Pages: 10 PURPOSE To provide general guidelines for the inspection of all ropes, chains, cables, slings, etc. used for personnel
More informationCompetency Framework for Advanced Deckhand-Fishing. Competency Framework for Advanced Deckhand-Fishing
Table of Contents (ADH-F)... 1 Function: Nautical knowledge... 1 Function Fishing Vessel Construction, Deck Equipment and Gear.... 2 Function: Fibre Ropes, Wire Ropes and Chains.... 4 Function: Knots and
More informationCourse Outline Cover Page
College of Micronesia FSM P.O. Box 159 Kolonia, Pohnpei Course Outline Cover Page Basic Seamanship MWD 102 Course Title Department and Number Course Description: To provide the learner with the knowledge
More informationGENERAL GUIDELINES FOR PROPER RIGGING PRACTICES AND INSPECTION & REMOVAL CRITERIA FOR SLINGS PER OSHA
GENERAL GUIDELINES FOR PROPER RIGGING PRACTICES AND INSPECTION & REMOVAL CRITERIA FOR SLINGS PER OSHA 1910.184 SAFE OPERATING PRACTICES -.Whenever any sling is used, the following practices shall be observed:
More informationFor Review Only No Copying No Saving No Lending No Posting Online
The following copyrighted samples are provided as a service for your review only. Copying, saving, lending, posting online or any general use of these files other than for the purpose provided is unlawful
More informationWork At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
More informationKnots and Hitches. To make a reef knot: Check out this video:
Knots and Hitches Being able to work with rope efficiently and effectively is an essential camp skill. Introduce your girls to the following knots, hitches and lashings before going to camp, and have them
More informationStart by crossing the two sticks or dowels at perpendicular or 90 degree angles.
Square Lashing Used to fasten two spars or poles together. Start by crossing the two sticks or dowels at perpendicular or 90 degree angles. Make a Clove Hitch on the vertical stick or dowel near the point
More informationScout It Out would like to extend its gratitude to all the sites where the following information had been gathered.
Rope Work introduces the basic knots that all Scouts and Guides should know. Most of the knots featured here are very useful in Pioneering and should be learnt. This Section does not fully teach the exact
More informationInspection & Maintenance
PERSONAL FALL ARREST EQUIPMENT Inspection & Maintenance This article addresses the requirements of OSHA1926.502(d)(21), which states that personal fall arrest systems shall be inspected prior to each use
More informationKNOTS. Overhand Knot. Page 12 of 32
Overhand Knot KNOTS The overhand knot is useful for tying cord around a pin to end a macramé project, holding beads in place, and tying your shoes! It also makes a nice variety knot in a macramé design.
More informationSea Scout Knots Knots Hitches Splices and Whippings
Sea Scout Knots Knots Hitches Splices and Whippings Knots www.artworkbygerry.com Bowline... 2 Bowline on the bight... 3 Clove hitch... 4 Double sheet bend... 5 Figure of eight... 6 Fireman s chair knot...
More informationWarning CABLE REPLACEMENT INSTRUCTIONS. Questions? - Call Telpro Inc. Customer Service at or
CABLE REPLACEMENT INSTRUCTIONS Warning Read and follow these warnings and the instructions that follow. Failure to do so could result in serious property damage and/or serious bodily injury. BEFORE operating
More informationScout Meeting Schedule: Week 1 Theme: Pioneering A Date:
Scout Meeting Schedule: Week 1 Theme: Pioneering A Date: Time Activity Program Details Leader Responsible 15 mins. Gathering Activity Bowling for Bottles 10 mins. Opening Ceremony Details can be found
More informationPURPOSE: The purpose of this Operating Policy/Procedure (OP) is to ensure that material handling devices are used correctly and safely.
[Date changed posted 10/3/17 (replaces 10/31/12 edition)] Operating Policy and Procedure : Material Handling Devices DATE: October 3, 2017 PURPOSE: The purpose of this Operating Policy/Procedure (OP) is
More informationThe Forest School Training Co. OCN accredited training
Useful Knots for Forest School The Overhand Knot 1. Cast an overhand loop. Take the working end and push it through the loop. The Figure of Eight Knot 1. Form a loop and pass the end under the standing
More informationReferences: EM Section 15 OSHA UFGS
References: EM 385-1-1 Section 15 OSHA 1926.251 UFGS 01 35-26 Rigging Safety Rigging equipment shall be inspected as specified by the manufacturer, by a Competent Person, before use on each shift and as
More informationFishing gears Ulla Oxvig Ulrik Jes Hansen
Fishing gears Ulla Oxvig Ulrik Jes Hansen Maintenance 2nd edition 2007 Maintenance: 87-90749-14-6 Published by: Fiskericirklen Copyright: Fiskericirklen Authors: Ulla Oxvig Born: 1965 MA Has handled numerous
More informationTRAINING BULLETIN ROPE 5 March 8, 2007 KNOTS AND HITCHES NOMENCLATURE
TRAINING BULLETIN ROPE March 8, 007 NOMENCLATURE Hitch A temporary method of securing an object, fastened so that it can be readily undone, i.e., Half Hitch. Bend The tying of the ends of two ropes to
More informationDrawing Showing the Component Parts of a Standard Steel Wire Rope
Drawing Showing the Component Parts of a Standard Steel Wire Rope Core wire Rope wire Strand Steel wire rope Core of natural or synthetic fibre or steel * *) The strands are wrapped around a core of fibre
More informationManaging Mobile Crane Hazards. Paul Satti Construction Safety Council. Hazards of Working Around Cranes. Key Concepts:
Managing Mobile Crane Hazards Paul Satti Construction Safety Council Hazards of Working Around Cranes Key Concepts: Electrocution Hazards Caught-In, Compressed or Crushing Hazards Struck-By Hazards Other
More informationWinchline n a box WINCH LINE SELECTION GUIDE. Wire Rope Winchlines are superior to most other winchlines found in the market place due to the
Winchline n a box Wire Rope Winchlines are superior to most other winchlines found in the market place due to the eye) end terminations. Each eye is protected by a steel liner (thimble) to guard against
More informationSemper Salus! CERT Disclaimer 3/4/2014. Lamorinda Community Emergency Response Team. Safety is Always the Number One Priority!
Lamorinda Community Emergency Response Team Rescue Ropes, Anchors and Knots Semper Salus! Safety is Always the Number One Priority! CERT Disclaimer This 2 hour presentation will NOT qualify you to perform
More informationScout Meeting Schedule: Week 3 Theme: Pioneering A Date:
Scout Meeting Schedule: Week 3 Theme: Pioneering A Date: Time Activity Program Details Leader Responsible 15 mins. Gathering Activity Chain Gang 10 mins. Opening Ceremony Details can be found in the Scout
More informationKnot Tying for Scouts and Scouters
Knot Tying for Scouts and Scouters Gary Panczner KNOT TYING Table of contents; Parts of a rope...3 Properties of rope fibers...4 Whipping...5 Overhand knot...5 Figure eight knot...5 Fisherman s knot...6
More informationDREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
More informationCRANE WITH WINCH USE AND MAINTENANCE MANUAL. Code Rev. Release MD /03
CRANE WITH WINCH Code Rev. Release MD.0.097 0 06/03 USE AND MAINTENANCE MANUAL CONTENTS 1 FOREWORD page 3 1.1 Description of the crane with winch page 3 2 USE OF THE CRANE WITH WINCH page 3 2.1 General
More information5. An Operating Procedures Outline Sheet (OPOS) shall be developed as required in Section 3282(p) (1)(C).
This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or
More informationTroop 226. Knot Master Program
Troop 226 Knot Master Program Knots are a skill taught at every level of scouting. The Knot Master program is designed to provide each scout an opportunity to learn essential knots. In addition to learning
More informationTry it! You ll like it!
083016 1 Lashing is a method used to join together poles (or spars as they are often called) with rope to build camp projects like wash stands, tables, and even a camp shower! Knowing how to attach two
More information2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.
VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working
More informationSECTION 15 RIGGING. b. Defective rigging shall be removed from service.
SECTION 15 RIGGING 15.A GENERAL 15.A.01 Inspection and use. a. Rigging equipment shall be inspected as specified by the manufacturer, by a Competent Person, before use on each shift and as necessary during
More informationInstallation and Training Manual
AirForce1 Tower Kit Installation and Training Manual FuturEnergy Limited Ettington Park Business Centre Stratford upon Avon CV37 8BT +44 (0)1789 451070 Table of Contents Safety Notes... 3 Parts Supplied
More informationROPES #1 Securing a Ladder to an Immovable Object Subject: General Section 101
ROPES #1 Securing a Ladder to an Immovable Object Subject: General Section 101 NFPA 1001 5.1.1 Firefighter I OBJECTIVE The firefighter trainee shall secure a ladder using a proper technique. The firefighter
More informationROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL FOUR INSTRUCTIONAL GUIDE SECTION 3 EO M TIE KNOTS AND LASHINGS PREPARATION
ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL FOUR INSTRUCTIONAL GUIDE SECTION 3 EO M490.03 TIE KNOTS AND LASHINGS Total Time: 60 min PREPARATION PRE-LESSON INSTRUCTIONS Resources needed for the delivery
More informationESOCCI RIGGING MANUAL
ESOCCI RIGGING MANUAL 1 Spray Covers Hull Rear Iako Forward Iako Ama ESOCCI RIGGING MANUAL 2 When training & racing in outrigger canoes, the canoe is your protector on the water and therefore it is imperative
More informationRESOURCE; IFSTA ESSENTIALS OF FIREFIGHTING 4 TH AND 5 TH EDITION
RESOURCE; IFSTA ESSENTIALS OF FIREFIGHTING 4 TH AND 5 TH EDITION 1 DIFFERENT TYPES OF ROPE CONSTRUCTION /CLASIFICATIONS PROPER CARE OF YOUR ROPE RECORD KEEPING AND STORAGE OF ROPES SEVERAL KNOTS USED IN
More informationWHS- 43 Lifting Equipment Procedure
WHS- 43 Lifting Equipment Procedure Table of contents 1 Purpose... 3 2 Scope... 3 3 References... 3 4 Roles and Responsibilities... 3 5 Definitions... 4 6 Records... 6 7 Planning... 6 8.Hazards... 6 9.Basic
More informationRigging Safety 16 Hour (API RP 2D 7 th Edition) Course Outline
Rigging Safety 16 Hour (API RP 2D 7 th Edition) Course Outline Prerequisites: This course shall have no formal pre-requisite. The individual should have no history of a disabling medical condition, which
More informationoperation WARNING! Operator must read and understand instructions here and on sling prior to use.
SLINGS S-17880, S-17881 S-17882, S-17883 S-17884, S-17885 operation WARNING! Operator must read and understand instructions here and on sling prior to use. Safe Operating Practices Inspect slings prior
More informationUSER S INSTRUCTION MANUAL FOR THE INSTALLATION, OPERATION & MAINTENANCE OF THE GUARDIAN TEMPORARY HORIZONTAL LIFELINE SYSTEM
USER S INSTRUCTION MANUAL FOR THE INSTALLATION, OPERATION & MAINTENANCE OF THE GUARDIAN 04630 TEMPORARY HORIZONTAL LIFELINE SYSTEM 1 WARNING This is a design compatible component for a comprehensive Guardian
More informationWIRE ROPE PULLING MACHINE
WIRE ROPE PULLING MACHINE Spare parts list and exploded view Specifications Dimensions Item No. 0.8T 1.6T 3.2T 5.4T Rated Capacity kg 800 1600 3200 Rated Forward Handpower N 343 441 441 Rated Forward Travel
More informationKNOTS. By Oliver Cameron with Ole Wik
KNOTS By Oliver Cameron with Ole Wik What knots do you use most often? 1 I think this is all superfluous, in that there is so much material well written and illustrated about using ropes and tying knots.
More informationSummary Report for Individual Task Tie Knots Status: Approved
Report Date: 10 Jun 2014 Summary Report for Individual Task 052-200-1075 Tie Knots Status: Approved Distribution Restriction: Approved for public release; distribution is unlimited. Destruction Notice:
More informationSection 15 TABLE OF CONTENTS Rigging. 15.A General B Personnel Qualifications
Section 15 TABLE OF CONTENTS Rigging Section: Page 15.A General... 15-1 15.B Personnel Qualifications... 15-2 15.C Multiple Lift Rigging (MLR) ( Christmas Tree Rigging )... 15-3 15.D Slings... 15-5 15.E
More informationMethod statement for. The installation of. Precast Concrete Piles. (Site Name).
Method statement for The installation of Precast Concrete Piles At (Site Name). 1 of 5 Standard Operating Procedures for Pile Driving. This method statement will outline how the authorised/ competent operatives
More informationSince rope is a vital part of a boat's equipment, a good sailor should be familiar with how to handle rope and how to tie a few basic knots.
SCOUTS Creating a Better World The Scout Association of Nigeria L'Association des Scouts du Nigeria La Asociación de Scouts de Nigeria A Associação dos Escoteiros de Nigéria جمعیة كشافة نیجیریا National
More informationLift-All Wire Rope & Slings
WIRE ROPE AND SLING BASICS Lift-All & Slings Two major and opposing characteristics of wire rope slings are flexibility and resistance to abrasion. To a great extent, these traits are a direct function
More informationThis guidance is based on the Risk Assessment approved by the Management Committee under the Club s Health & Safety Policy.
Guidance on Safe Use of Dalgety Bay Sailing Club Raft This guidance is based on the Risk Assessment approved by the Management Committee under the Club s Health & Safety Policy. Where any items referred
More informationPioneering. It s More Than Just Knots and Rope
Pioneering It s More Than Just Knots and Rope Mark Montrose Retired Scoutmaster Troop 14, Santa Clara Venture Crew Advisor Crew 14, Santa Clara Assistant District Commissioner Pioneer District University
More informationCaving Knots. Prepared by CCPO S C Milton CSCA Technical Training Adviser
Nov 2001 Prepared by CCPO S C Milton CSCA Technical Training Adviser INTRODUCTION 1. This booklet provides information about knots used for caving. The "Basic knots" detailed within this booklet are taught
More informationNOTES BEFORE USE BE SURE TO READ THIS MANUAL BEFORE USING THE HELMET. KEEP THE MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
NOTES BEFORE USE BE SURE TO READ THIS MANUAL BEFORE USING THE HELMET. KEEP THE MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. 01 Chinstraps Chinstraps play an important role under an accident, preventing
More informationRopes and Rope Work. Agriculture Mechanics Santa Ynez High School
Ropes and Rope Work Agriculture Mechanics Santa Ynez High School 5 Common Uses of Rope 1. Ropes are used to secure livestock and pets through the use of halters, lead ropes and leashes. 2. Heavy loads,
More informationDouble Braid Eye Splice
Double Braid Eye Splice SP-10(03/17) Double Braid Eye Splice This splice is used to create a permanent loop at the end of a rope, it is intended for double braid ropes made with polyester, nylon, polyolefins
More informationCHAPTER 1 TROLLING BASICS
CHAPTER 1 TROLLING BASICS A. TROLLING IN THE PACIFIC B. SOME TROLLING TERMS 3 SECTION A: TROLLING IN THE PACIFIC Trolling is the name given to the type of fishing in which a natural or artificial bait,
More informationHeavy Equipment & Rigging Specialist Training
Heavy Equipment & Rigging Specialist Training Module 1 Unit 4: Intro to Rigging May08 1 Key Points Review of Exercise Goals Discuss Rigging Components Language of Crane Signals Review Anchor Installation
More informationBladerider X8 Assembly Help Notes
2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email
More informationMSC-132: Introduction, Plain Whipping, Loops, Turns & Hitches
MSC-132: Introduction, Plain Whipping, Loops, Turns & Hitches This presentation is designed to be used as a study companion to lectures, labs and handouts given in Fishing Gear Technology I. Advance each
More informationPioneering. It s More Than Just Knots and Rope
Pioneering It s More Than Just Knots and Rope Mark Montrose Retired Scoutmaster Troop 14, Santa Clara Venture Crew Advisor Crew 14, Santa Clara Assistant District Commissioner Pioneer District University
More informationCongratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and
Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and shopping in the city. The JC Series frames are made of
More informationFunction: Navigation at the support level
STCW Code Table A-II/5 Specification of Minimum Standards of Competence of Ratings as Able Seafarer Deck Ref: https://www.edumaritime.net/stcw-code Source: IMO Function: Navigation at the support level
More informationCare, Use and Inspection
Care, Use and Inspection of Synthetic Web Slings Safety is the paramount consideration involved in the use of any web sling. This standard does not purport to address all safety concerns, if any, associated
More informationLOAD HUGGER CARGO CONTROL
Hugger BASICS Lift-All Hugger cargo control and load securement products are of the highest quality. They offer the van and flatbed operator a wide variety of options to meet Department of Transportation
More informationRubber Dock Hose care, Use & Maintenance
Rubber Dock Hose care, Use & Maintenance Prepared by: Thomas J. Wise VP Corporate Development Contents Revised - July. 2014 1. Novaflex Rubber Dock Hose Testing & Inspection Program 1.1 Introduction -
More informationFall Protection PPT-SM-FALLPROT V.A.0.0
Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which
More informationWIRE ROPE AND SLING BASICS. Total. of Wires WIRE ROPE SLINGS. Use of EIP, IWRC rope gives 15% greater capacity than IP, IWRC ropes.
V WIRE ROPE AND SLING BASICS & Slings Two major and opposing characteristics of wire rope slings are flexibility and resistance to abrasion. To a great extent, these traits are a direct function of the
More informationKnots /2017. Camp and Outdoor Curriculum Manual
Knots 05-4487-01/2017 Camp and Outdoor Curriculum Manual Parts of a Rope Bight: A bend in the rope Loop: Crossing the rope over itself, creating a loop Overhand Loop: When the working end of the rope crosses
More informationSerial Number: Lot Number: Purchase Date: General Factors Accepted / Rejected Supportive Details or Comments. Accepted Rejected.
Full Body Harness Harness Model: General Factors / Supportive Details or Comments 1.) Hardware: (includes D-rings, buckles, keepers, and back pads) Inspect for damage, distortion, sharp edges, burrs, cracks
More informationUser Instructions 1789 Parapet Wall Anchor
User Instructions 1789 Parapet Wall Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee training program as required
More informationInstallation and Operating Instructions for Automotive Winch Synthetic Rope
Installation and Operating Instructions for Automotive Winch Synthetic Rope 2 1 Synthetic Rope Kit Parts List Part No. 251262 1. Rope Assembly (3/8 x 100 ) 2. Hook Strap WARNING: A minimum of EIGHT wraps
More informationQUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift
INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your
More information