Fully encapsulated. Reliable. Precise. DPZ-plus Sealed Gripper
|
|
- Barnard McCormick
- 5 years ago
- Views:
Transcription
1 DPZ-plus Fully encapsulated. Relable. Precse. DPZ-plus Sealed Grpper Despte the hgh moment load of the base jaws, ths sealed 3-fnger centrc grpper satsfes the requrements of IP67 and does not permt any substances from the workng envronment to penetrate the nteror of the component Feld of Applcaton The grpper s deally sutable for handlng of rough or drty workpeces. Its feld of applcaton extends from the loadng and unloadng of machnes, such as n the case of santary blocks, grndng machnes, lathes or mllng machnes, to handlng tasks n pantng plants, n powder-processng or underwater. Advantages Your beneft Robust nteror mult-tooth gudance for the precse handlng of all knds of workpeces Lp seal at the outsde round gudance for permanent, secure grpper sealng Hgh maxmum moments possble sutable for usng long grpper fngers Sealed 3-Fnger Centrc Grpper comples to IP67 requrements despte a hgh moment load Fastenng at one grpper sde n two screw drectons for unversal and flexble grpper assembly Maxmum grppng forces despte a compact desgn for a wde range of applcatons Ar supply va hose-free drect connecton or screw connectons for flexble pressure supply n all automated systems Compact dmensons for mnmal nterferng contours n handlng Szes Quantty: 8 Weght kg Grppng force N Stroke per jaw mm Workpece weght kg 1178
2 DPZ-plus Functonal Descrpton The pston s moved up and down by compressed ar. The angled actve surfaces of the wedge-hook produce a synchronzed, centrc jaw movement. DPZ-p 1 Inner De jaw wth mult-tooth gudance 3Lp for hgh based plus -p3 LpLp seal h moment mdh loads -p4 forpfor permanent, secure grpper sealng 2External round rodal base jaw 4 Round RopRo pston wth rod and wedge-hook provdng a sealable, round surface for power generaton CAD data, operatng manuals and other current product documents are avalable at
3 DPZ-plus General Notes about the Seres Operatng prncple: Wedge-hook knematcs Housng materal: Alumnum alloy, anodzed Base jaw materal: Steel Actuaton: pneumatc, wth fltered compressed ar as per DIN ISO : Warranty: 36 months (for detals, GTCs, and operatng manuals, vst Scope of delvery: Centerng sleeves, centerng pns, O-rngs for drect connecton, assembly and operatng manual wth manufacturer s declaraton Grppng force mantenance devce: possble wth varants wth mechancal mantenance of grppng force or SDV-P pressure mantenance valve Grppng force: s the arthmetc total of the grppng force appled to each grpper jaw at dstance P (see llustraton). Fnger length: s measured from the upper edge of the grpper housng n the drecton of the man axs. The breach of the max. permtted fnger length can brng hgher abrason. The maxmum permssble fnger length apples up to the nomnal operatng pressure. Wth hgher pressures, the fnger length must be reduced proportonally to the nomnal operatng pressure. Repeat accuracy: s defned as the spread of the lmt poston after 100 consecutve strokes. Workpece weght: s calculated for a force-ft connecton wth a coeffcent of frcton of 0.1 and a safety factor of 2 aganst slppage of the workpece on acceleraton due to gravty g. Consderably heaver workpece weghts are permtted wth form-ft grppng. Closng and openng tmes: are purely the tmes that the base jaws or fngers are n moton. Valve swtchng tmes, hose fllng tmes or PLC reacton tmes are not ncluded n the above tmes and must be taken nto consderaton when determnng cycle tmes. Applcaton example Inserton tool for assembly of small to medum-szed workpeces. The tool can be used n both clean and drty envronments. Due to ts quck-change system, other tools can alternately be fxed to the robot flange. 1 DPZ-plus 3-Fnger Centrc Grpper 2 FUS Inserton Unt 3 SWS Quck-change System 1180
4 DPZ-plus SCHUNK offers more... The followng components make the product DPZ-plus even more productve the sutable addton for the hghest functonalty, flexblty, relablty, and controlled producton. Centerng Sleeves Fttngs Sensor System Sensor Cables SDV-P Pressure Mantenance Valve Plastc Inserts Sensor Dstrbutor Jaw Quck-change System Intermedate Jaws Fnger Blanks Unversal Intermedate Jaw AGE-F Compensaton Unt Further nformaton regardng the products can be found on the followng product pages or at Please contact us for further nformaton: SCHUNK techncal hotlne Optons and specal Informaton Grppng force mantenance verson AS / IS: The mechancal grppng force mantenance verson ensures a mnmum grppng force also n the case of a drop n pressure. In the AS / S verson ths has the effect of a closng force, n the IS verson of an openng force. Force ntensfed verson KVZ: f hgher grppng forces are requred ATEX verson EX: for explosve envronments Please note that the grpper requres an addtonal hose for bleedng or for a swtchable sealng ar connecton therefore a total of three hoses. For detaled nformaton, refer to the assembly and operatng manual. Addtonal versons: Varous optons can be combned. Numerous addtonal optons are also avalable just tell us what your task s! 1181
5 DPZ-plus SCHUNK DPZ-plus Grpper Overvew of Accessores
6 DPZ-plus 1 DPZ-plus Sealed 3-fnger centrc grpper wth hgh grppng force and hgh moment load due to mult-tooth gudance 2 MMS 22 Magnetc swtch wth axal cable outlet for poston montorng 2 MMS 22-PI1 Magnetc swtch wth axal cable outlet for montorng a freely programmable poston 2 MMS 22-PI2 Magnetc swtch wth axal cable outlet for montorng two freely programmable postons 3 MMS 22-PI1-SA Magnetc swtch wth lateral cable outlet for montorng a freely programmable poston 3 MMS 22-SA Magnetc swtch wth lateral cable outlet for poston montorng 4 MMS-P Magnetc swtch wth axal cable outlet for montorng two freely programmable postons wth an ntegrated teachng functon 5 RMS 22 Reed swtch for drect assembly n the C-slot 6 TCU Tolerance compensaton unt for compensaton of small tolerances n the plane 7 AGE Compensaton unt for compensaton of large tolerances along the X and Y axes 8 ASG Adapter plate for combnaton of varous automaton components n the modular system 10 ZBA Intermedate jaws for re-orentng the mountng surface 11 UZB The unversal ntermedate jaw allows fast, tool-free, safe shftng of top jaws at the grpper 12 FMS Force-measurng jaws for measurng grppng forces, workpece weghts or devatons n dmenson 13 BSWS-AR Adapter couplng of the jaw quck-change system for fast, manual change of top jaws 14 BSWS-B Lockng mechansm of the jaw quck-change system for fast, manual change of top jaws 15 BSWS-A Adapter couplng of the jaw quck-change system for adaptaton to the customzed fnger 16 Customzed fnger 17 BSWS-ABR Fnger blank made of alumnum wth nterface of the jaw quck-change system 17 BSWS-SBR Fnger blank made of steel wth nterface of the jaw quck-change system 18 BSWS-UR Lockng mechansm for ntegraton of the jaw quckchange system nto customzed fngers 19 ABR / SBR Fnger blanks made of steel or alumnum wth standardzed screw connecton dagram 20 ZBA Intermedate jaws for re-orentng the mountng surface 9 CLM Lnear module wth pneumatc drve and pre-loaded juncton rollers free of play 1183
7 DPZ-plus 40 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 8 Nm M y max. 9 Nm M z max. 4 Nm F z max. 190 N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus 40 DPZ-plus 40-AS DPZ-plus 40-IS ID Stroke per jaw [mm] Closng- / openng force [N] 230/ /- -/355 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.03/ / /0.05 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
8 DPZ-plus 40 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1185
9 DPZ-plus 40 Hose-free drect connecton M3 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 1186
10 DPZ-plus 40 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P
11 DPZ-plus 40 MMS electronc magnetc swtches MMS PI1 programmable magnetc swtches AQ Cable outlet IT MMS sensor IK MMS SA sensor AQ Cable outlet IT MMS PI1-... sensor IK MMS PI1-...-SA sensor End poston montorng for mountng n the C-slot. Descrpton ID Often combned MMS electronc magnetc swtches MMS 22-S-M8-PNP MMSK 22-S-PNP MMS electronc magnetc swtches wth lateral cable outlet MMS 22-S-M8-PNP-SA MMSK 22-S-PNP-SA Cable extensons KV BW08-SG08 3P-0030-PNP KV BW08-SG08 3P-0100-PNP KV BW08-SG08 3P-0200-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 3P-0300-PNP KA BG08-L 3P-0500-PNP KA BW08-L 3P-0300-PNP KA BW08-L 3P-0500-PNP Sensor dstrbutor V2-M V4-M V8-M Poston query wth one programmable poston per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned Plug teachng tool ST-MMS 22-PI1-PNP MMS PI1 programmable magnetc swtches MMS 22-PI1-S-M8-PNP MMSK 22-PI1-S-PNP MMS PI1-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD MMSK 22-PI1-S-PNP-HD MMS PI1 programmable magnetc swtches wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA MMSK 22-PI1-S-PNP-SA Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS 22. Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1188
12 DPZ-plus 40 MMS PI2 programmable magnetc swtches MMS-P programmable magnetc swtches AQ Cable outlet IT MMS PI2-... sensor GN Stop for MMS-P Poston query wth two programmable postons per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI2 programmable magnetc swtches MMS 22-PI2-S-M8-PNP MMSK 22-PI2-S-PNP MMS PI2-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI2-S-M8-PNP-HD MMSK 22-PI2-S-PNP-HD Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS-P 22. Poston montorng wth two programmable postons per sensor. The end poston montorng s mounted n the C-slot. Descrpton ID Often combned MMS-P programmable magnetc swtches MMSK-P 22-S-PNP MMS-P 22-S-M8-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 4P KA BG08-L 4P KA BW08-L 4P KA BW08-L 4P Sensor dstrbutor V2-M8-4P-2XM8-3P Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1189
13 DPZ-plus 50 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 15 Nm M y max. 19 Nm M z max. 8 Nm F z max. 375 N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus 50-1 DPZ-plus 50-2 DPZ-plus 50-1-AS DPZ-plus 50-2-AS DPZ-plus 50-1-IS DPZ-plus 50-2-IS ID Stroke per jaw [mm] Closng- / openng force [N] 290/ / /- 830/- -/455 -/945 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 2.5/8 4/6.5 4/6.5 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.03/ / / / / /0.03 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
14 DPZ-plus 50 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1191
15 DPZ-plus 50 Hose-free drect connecton M3 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn Intermedate jaw nterface IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 4 Grpper IT Customzed grpper fngers IK Unform screw connecton pattern By usng the ntermedate jaw, you have the possblty of drectly connectng a wde range of accessores drectly. Ths ncludes force measurng jaws, jaw quck-change systems, fnger blanks, and unversal ntermedate jaws. 1192
16 DPZ-plus 50 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P ZBA DPG plus / DPZ plus 50 ntermedate jaws 2 Fnger connecton ER Dstance from center of grpper GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the matng part Optonally ntermedate jaws can be used, enablng drect connecton and algnment of top jaws and varous standard accessores n Z-drecton. Descrpton ID Materal Scope of delvery Intermedate jaws ZBA-DPG-DPZ-plus Alumnum
17 DPZ-plus 50 MMS electronc magnetc swtches AQ Cable outlet IT MMS sensor IK MMS SA sensor End poston montorng for mountng n the C-slot. Descrpton ID Often combned MMS electronc magnetc swtches MMS 22-S-M8-PNP MMSK 22-S-PNP MMS electronc magnetc swtches wth lateral cable outlet MMS 22-S-M8-PNP-SA MMSK 22-S-PNP-SA Cable extensons KV BW08-SG08 3P-0030-PNP KV BW08-SG08 3P-0100-PNP KV BW08-SG08 3P-0200-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 3P-0300-PNP KA BG08-L 3P-0500-PNP KA BW08-L 3P-0300-PNP KA BW08-L 3P-0500-PNP Sensor dstrbutor V2-M V4-M V8-M Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1194
18 DPZ-plus 50 MMS PI1 programmable magnetc swtches MMS PI2 programmable magnetc swtches AQ Cable outlet IT MMS PI1-... sensor IK MMS PI1-...-SA sensor Poston query wth one programmable poston per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned Plug teachng tool ST-MMS 22-PI1-PNP MMS PI1 programmable magnetc swtches MMS 22-PI1-S-M8-PNP MMSK 22-PI1-S-PNP MMS PI1-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD MMSK 22-PI1-S-PNP-HD MMS PI1 programmable magnetc swtches wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA MMSK 22-PI1-S-PNP-SA AQ Cable outlet IT MMS PI2-... sensor Poston query wth two programmable postons per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI2 programmable magnetc swtches MMS 22-PI2-S-M8-PNP MMSK 22-PI2-S-PNP MMS PI2-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI2-S-M8-PNP-HD MMSK 22-PI2-S-PNP-HD Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS-P 22. Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS
19 DPZ-plus 50 MMS-P programmable magnetc swtches GN Stop for MMS-P Poston montorng wth two programmable postons per sensor. The end poston montorng s mounted n the C-slot. Descrpton ID Often combned MMS-P programmable magnetc swtches MMSK-P 22-S-PNP MMS-P 22-S-M8-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 4P KA BG08-L 4P KA BW08-L 4P KA BW08-L 4P Sensor dstrbutor V2-M8-4P-2XM8-3P Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1196
20 Notes 1197
21 DPZ-plus 64 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 30 Nm M y max. 45 Nm M z max. 30 Nm F z max. 825 N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus 64-1 DPZ-plus 64-2 DPZ-plus 64-1-AS DPZ-plus 64-2-AS DPZ-plus 64-1-IS DPZ-plus 64-2-IS ID Stroke per jaw [mm] Closng- / openng force [N] 520/ / /- 1215/- -/820 -/1490 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 2.5/8 4/6.5 4/6.5 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.04/ / / / / /0.03 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
22 DPZ-plus 64 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1199
23 DPZ-plus 64 Hose-free drect connecton M4 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn Intermedate jaw nterface IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 4 Grpper IT Customzed grpper fngers IK Unform screw connecton pattern By usng the ntermedate jaw, you have the possblty of drectly connectng a wde range of accessores drectly. Ths ncludes force measurng jaws, jaw quck-change systems, fnger blanks, and unversal ntermedate jaws. 1200
24 DPZ-plus 64 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-PZN-plus/DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P ZBA DPG-plus / DPZ-plus 64 ntermedate jaws 2 Fnger connecton ER Dstance from center of grpper GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the matng part Optonally ntermedate jaws can be used, enablng drect connecton and algnment of top jaws and varous standard accessores n Z-drecton. Descrpton ID Materal Scope of delvery Intermedate jaws ZBA-DPG-DPZ-plus Alumnum
25 DPZ-plus 64 MMS electronc magnetc swtches AQ Cable outlet IT MMS sensor IK MMS SA sensor End poston montorng for mountng n the C-slot. Descrpton ID Often combned MMS electronc magnetc swtches MMS 22-S-M8-PNP MMSK 22-S-PNP MMS electronc magnetc swtches wth lateral cable outlet MMS 22-S-M8-PNP-SA MMSK 22-S-PNP-SA Cable extensons KV BW08-SG08 3P-0030-PNP KV BW08-SG08 3P-0100-PNP KV BW08-SG08 3P-0200-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 3P-0300-PNP KA BG08-L 3P-0500-PNP KA BW08-L 3P-0300-PNP KA BW08-L 3P-0500-PNP Sensor dstrbutor V2-M V4-M V8-M Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1202
26 DPZ-plus 64 MMS PI1 programmable magnetc swtches MMS PI2 programmable magnetc swtches AQ Cable outlet IT MMS PI1-... sensor IK MMS PI1-...-SA sensor Poston query wth one programmable poston per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned Plug teachng tool ST-MMS 22-PI1-PNP MMS PI1 programmable magnetc swtches MMS 22-PI1-S-M8-PNP MMSK 22-PI1-S-PNP MMS PI1-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD MMSK 22-PI1-S-PNP-HD MMS PI1 programmable magnetc swtches wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA MMSK 22-PI1-S-PNP-SA AQ Cable outlet IT MMS PI2-... sensor Poston query wth two programmable postons per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI2 programmable magnetc swtches MMS 22-PI2-S-M8-PNP MMSK 22-PI2-S-PNP MMS PI2-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI2-S-M8-PNP-HD MMSK 22-PI2-S-PNP-HD Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS-P 22. Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS
27 DPZ-plus 64 MMS-P programmable magnetc swtches GN Stop for MMS-P Poston montorng wth two programmable postons per sensor. The end poston montorng s mounted n the C-slot. Descrpton ID Often combned MMS-P programmable magnetc swtches MMSK-P 22-S-PNP MMS-P 22-S-M8-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 4P KA BG08-L 4P KA BW08-L 4P KA BW08-L 4P Sensor dstrbutor V2-M8-4P-2XM8-3P Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1204
28 Notes 1205
29 DPZ-plus 80 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 45 Nm M y max. 71 Nm M z max. 40 Nm F z max N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus 80-1 DPZ-plus 80-2 DPZ-plus 80-1-AS DPZ-plus 80-2-AS DPZ-plus 80-1-IS DPZ-plus 80-2-IS ID Stroke per jaw [mm] Closng- / openng force [N] 900/ / /- 2725/- -/1330 -/2765 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 2.5/8 4/6.5 4/6.5 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.07/ / / / / /0.05 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
30 DPZ-plus 80 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1207
31 DPZ-plus 80 Hose-free drect connecton M4 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn Intermedate jaw nterface IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 4 Grpper IT Customzed grpper fngers IK Unform screw connecton pattern By usng the ntermedate jaw, you have the possblty of drectly connectng a wde range of accessores drectly. Ths ncludes force measurng jaws, jaw quck-change systems, fnger blanks, and unversal ntermedate jaws. 1208
32 DPZ-plus 80 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-PZN-plus/DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P ZBA DPG-plus / DPZ-plus 80 ntermedate jaws 2 Fnger connecton ER Dstance from center of grpper GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the matng part Optonally ntermedate jaws can be used, enablng drect connecton and algnment of top jaws and varous standard accessores n Z-drecton. Descrpton ID Materal Scope of delvery Intermedate jaws ZBA-DPG-DPZ-plus Alumnum
33 DPZ-plus 80 MMS electronc magnetc swtches AQ Cable outlet IT MMS sensor IK MMS SA sensor End poston montorng for mountng n the C-slot. Descrpton ID Often combned MMS electronc magnetc swtches MMS 22-S-M8-PNP MMSK 22-S-PNP MMS electronc magnetc swtches wth lateral cable outlet MMS 22-S-M8-PNP-SA MMSK 22-S-PNP-SA Reed swtches RMS 22-S-M Cable extensons KV BW08-SG08 3P-0030-PNP KV BW08-SG08 3P-0100-PNP KV BW08-SG08 3P-0200-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 3P-0300-PNP KA BG08-L 3P-0500-PNP KA BW08-L 3P-0300-PNP KA BW08-L 3P-0500-PNP RSS rado sensor system RSS-T Sensor dstrbutor V2-M V4-M V8-M Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1210
34 DPZ-plus 80 MMS PI1 programmable magnetc swtches MMS PI2 programmable magnetc swtches AQ Cable outlet IT MMS PI1-... sensor IK MMS PI1-...-SA sensor Poston query wth one programmable poston per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI1 programmable magnetc swtches MMS 22-PI1-S-M8-PNP MMSK 22-PI1-S-PNP MMS PI1-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD MMSK 22-PI1-S-PNP-HD MMS PI1 programmable magnetc swtches wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA MMSK 22-PI1-S-PNP-SA Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS 22. AQ Cable outlet IT MMS PI2-... sensor Poston query wth two programmable postons per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI2 programmable magnetc swtches MMS 22-PI2-S-M8-PNP MMSK 22-PI2-S-PNP MMS PI2-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI2-S-M8-PNP-HD MMSK 22-PI2-S-PNP-HD Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS-P
35 DPZ-plus 80 MMS-P programmable magnetc swtches GN Stop for MMS-P Poston montorng wth two programmable postons per sensor. The end poston montorng s mounted n the C-slot. Descrpton ID Often combned MMS-P programmable magnetc swtches MMSK-P 22-S-PNP MMS-P 22-S-M8-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 4P KA BG08-L 4P KA BW08-L 4P KA BW08-L 4P Sensor dstrbutor V2-M8-4P-2XM8-3P Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1212
36 Notes 1213
37 DPZ-plus 100 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 60 Nm M y max. 85 Nm M z max. 53 Nm F z max N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus DPZ-plus DPZ-plus AS DPZ-plus AS DPZ-plus IS DPZ-plus IS ID Stroke per jaw [mm] Closng- / openng force [N] 1620/ / /- 4950/- -/2620 -/5460 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 2.5/8 4/6.5 4/6.5 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.13/ / / / / /0.13 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
38 DPZ-plus 100 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1215
39 DPZ-plus 100 Hose-free drect connecton M5 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn Intermedate jaw nterface IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 4 Grpper IT Customzed grpper fngers IK Unform screw connecton pattern By usng the ntermedate jaw, you have the possblty of drectly connectng a wde range of accessores drectly. Ths ncludes force measurng jaws, jaw quck-change systems, fnger blanks, and unversal ntermedate jaws. 1216
40 DPZ-plus 100 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-PZN-plus/DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P ZBA DPG-plus / DPZ-plus 100 ntermedate jaws 2 Fnger connecton ER Dstance from center of grpper GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the matng part Optonally ntermedate jaws can be used, enablng drect connecton and algnment of top jaws and varous standard accessores n Z-drecton. Descrpton ID Materal Scope of delvery Intermedate jaws ZBA-DPG-DPZ-plus Alumnum
41 DPZ-plus 100 MMS electronc magnetc swtches AQ Cable outlet IT MMS sensor IK MMS SA sensor End poston montorng for mountng n the C-slot. Descrpton ID Often combned MMS electronc magnetc swtches MMS 22-S-M8-PNP MMSK 22-S-PNP MMS electronc magnetc swtches wth lateral cable outlet MMS 22-S-M8-PNP-SA MMSK 22-S-PNP-SA Reed swtches RMS 22-S-M Cable extensons KV BW08-SG08 3P-0030-PNP KV BW08-SG08 3P-0100-PNP KV BW08-SG08 3P-0200-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 3P-0300-PNP KA BG08-L 3P-0500-PNP KA BW08-L 3P-0300-PNP KA BW08-L 3P-0500-PNP RSS rado sensor system RSS-T Sensor dstrbutor V2-M V4-M V8-M Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1218
42 DPZ-plus 100 MMS PI1 programmable magnetc swtches MMS PI2 programmable magnetc swtches AQ Cable outlet IT MMS PI1-... sensor IK MMS PI1-...-SA sensor Poston query wth one programmable poston per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI1 programmable magnetc swtches MMS 22-PI1-S-M8-PNP MMSK 22-PI1-S-PNP MMS PI1-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD MMSK 22-PI1-S-PNP-HD MMS PI1 programmable magnetc swtches wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA MMSK 22-PI1-S-PNP-SA Two sensors (closer/s) are requred for each unt, plus extenson cables as an opton. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS 22. AQ Cable outlet IT MMS PI2-... sensor Poston query wth two programmable postons per sensor and electroncs ntegrated n sensor. Programmable va MT magnet teachng tool (ncluded n the scope of delvery) or ST plug teachng tool (optonal). Lmt poston query mounted n C-groove. If the ST plug teachng tools are lsted n the table, teachng can only take place wth the ST plug teachng tools. Descrpton ID Often combned MMS PI2 programmable magnetc swtches MMS 22-PI2-S-M8-PNP MMSK 22-PI2-S-PNP MMS PI2-HD programmable magnetc swtches wth stanless steel housng MMS 22-PI2-S-M8-PNP-HD MMSK 22-PI2-S-PNP-HD Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. Connecton cable, cable extensons, and sensor dstrbutors can be found n the table for the MMS-P
43 DPZ-plus 100 MMS-P programmable magnetc swtches GN Stop for MMS-P Poston montorng wth two programmable postons per sensor. The end poston montorng s mounted n the C-slot. Descrpton ID Often combned MMS-P programmable magnetc swtches MMSK-P 22-S-PNP MMS-P 22-S-M8-PNP Clp for plug / socket CLI-M Connecton cables KA BG08-L 4P KA BG08-L 4P KA BW08-L 4P KA BW08-L 4P Sensor dstrbutor V2-M8-4P-2XM8-3P Per unt one sensor (closer/s) s requred, optonally a cable extenson. Please note the mnmum permtted bendng rad for the sensor cables, whch are generally 35 mm. 1220
44 Notes 1221
45 DPZ-plus 125 Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 90 Nm M y max. 110 Nm M z max. 75 Nm F z max N Fnger length The ndcated moments and forces are statc values, apply per base jaw and may occur smultaneously. M y may arse n addton to the moment generated by the grppng force tself. If the max. permtted fnger weght s exceeded, t s mpreatve to throttle the ar supply so that the jaw movement occurs wthout any httng or bouncng. Servce lfe may be reduced. Techncal data Descrpton DPZ-plus DPZ-plus DPZ-plus AS DPZ-plus AS DPZ-plus IS DPZ-plus IS ID Stroke per jaw [mm] Closng- / openng force [N] 2945/ / /- 7000/- -/4015 -/8300 mn. sprng force [N] Weght [kg] Recommended workpece weght [kg] Flud consumpton per double stroke [cm³] mn. / max. operatng pressure [bar] 2.5/8 2.5/8 4/6.5 4/6.5 4/6.5 4/6.5 Nomnal operatng pressure [bar] Closng- / openng tme [s] 0.25/ / / / / /0.22 max. permtted fnger length [mm] max. permtted weght per fnger [kg] IP class mn. / max. ambent temperature [ C] 5/90 5/90 5/90 5/90 5/90 5/90 Repeat accuracy [mm] Cleanroom class ISO
46 DPZ-plus 125 Man vew For the fnger connecton, we recommend only usng two of the four centerng fttngs per fnger. The drawng shows the basc verson of the grpper wth closed jaws, wthout consderaton of the optons descrbed below. The SDV-P pressure mantenance valve can also be used for I.D. or O.D. grppng alternatvely or n addton to the sprng-loaded, mechancal grppng force mantenance devce (see catalog secton on Accessores ). A, a Man / drect connecton, grpper openng B, b Man / drect connecton, grpper closng S, E Ar purge connecton ( bar), or deaeraton bore 1 Grpper connecton 2 Fnger connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the matng part IT MMS sensor 1223
47 DPZ-plus 125 Hose-free drect connecton M5 Grppng force mantenance devce AS / IS 3 Adapter 4 Grpper The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. The mechancal mantenance of grppng force also assures a mnmum grppng force n the case of a loss of pressure. Wth the AS / S varant, ths acts as a closng force, and as an openng force for the IS varant. The mantenance of grppng force element can also be used as a means for ncreasng grppng force or for sngle actuated grppng. Proposed jaw desgn Intermedate jaw nterface IT Step In order to avod mparment of the stroke due to contamnaton or chps, there should be a suffcent dstance between the top jaws and the grpper. 4 Grpper IT Customzed grpper fngers IK Unform screw connecton pattern By usng the ntermedate jaw, you have the possblty of drectly connectng a wde range of accessores drectly. Ths ncludes force measurng jaws, jaw quck-change systems, fnger blanks, and unversal ntermedate jaws. 1224
48 DPZ-plus 125 Sprng-loaded pressure pece SDV-P pressure mantenance valve IT Gude pn For sprng-supported postonng of the workpece aganst a stop after the grpper has opened. Especally developed for loadng machnes. Descrpton ID Stroke Mn. force [mm] [N] Sprng-loaded pressure pece A-PZN-plus/DPZ-plus Grpper IT SDV-P pressure mantenance valve The SDV-P pressure mantenance valves ensure that the pressure n the pston chamber of pneumatc grppng, rotary, lnear, and quck-change modules s mantaned temporarly durng an emergency stop. Descrpton ID Pressure mantenance valve SDV-P ZBA DPG-plus / DPZ-plus 125 ntermedate jaws 2 Fnger connecton ER Dstance from center of grpper GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the matng part Optonally ntermedate jaws can be used, enablng drect connecton and algnment of top jaws and varous standard accessores n Z-drecton. Descrpton ID Materal Scope of delvery Intermedate jaws ZBA-DPG-DPZ-plus Alumnum
Gripping force, O.D. gripping. MPZ 20 / 4 bar MPZ 20 / 6 bar. MPZ 20-AS / 4 bar MPZ 20-AS / 6 bar. Gripping force, I.D. gripping
SCHUNK Grppers pneumatc 3-Fnger Centrc Grppers Small Components Grpper Grppng force, O.D. grppng Fnger load Grppng force 50 MPZ 20 / 4 bar MPZ 20 / 6 bar MPZ 20-AS / 4 bar MPZ 20-AS / 6 bar 40 30 20 10
More informationProduct Information. Long-stroke gripper PFH-mini
Product Informaton PFH-mn PFH-mn Loadable. Flexble. Relable. PFH-klen long-stroke grpper 2-fnger parallel grpper wth large jaw stroke for large parts and / or a broad range of parts Feld of applcaton clean
More informationProduct Information. Long-stroke gripper PSH 42
Product Informaton PSH 42 PSH Compact. Flexble. Fully encapsulated. PSH long-stroke grpper 2-fnger parallel grpper wth long jaw stroke and drt-resstant round gudance Feld of applcaton n contamnated work
More informationProduct Information. Long-stroke gripper PHL
Product Informaton PHL PHL Flexble. Precse. Powerful. PHL long-stroke grpper 2-fnger parallel grpper wth large jaw stroke for large parts and / or a broad range of parts Feld of applcaton Optmum standard
More informationProduct Information. Radial gripper PRG 52
Product Informaton PRG More flexble More powerful. Slm. PRG unversal grpper 180 radal grpper wth powerful 1-shft slotted lnk gear and oval pston. Feld of applcaton For areas of applcaton whch, n addton
More informationProduct Information. Universal gripper PZN-plus
Product Informaton Unversal grpper PZN-plus PZN-plus Unversal grpper Relable. Robust. Flexble. PZN-plus unversal grpper Unversal 3-Fnger Centrc Grpper wth hgh grppng force and maxmum moments due to mult-tooth
More informationProduct Information. Universal gripper PZN-plus 40
Product Informaton PZN-plus 40 PZN-plus Relable. Robust. Flexble. PZN-plus unversal grpper Unversal 3-Fnger Centrc Grpper wth hgh grppng force and maxmum moments due to mult-tooth gudance Feld of applcaton
More informationProduct Information. Long-stroke gripper PHL 50
Product Informaton PHL 50 PHL Flexble. Precse. Powerful. PHL long-stroke grpper 2-fnger parallel grpper wth large jaw stroke for large parts and / or a broad range of parts Feld of applcaton Optmum standard
More informationProduct Information. Universal gripper PZN-plus 64
Product Informaton Unversal grpper PZN-plus 64 PZN-plus Unversal grpper Relable. Robust. Flexble. PZN-plus unversal grpper Unversal 3-Fnger Centrc Grpper wth hgh grppng force and maxmum moments due to
More informationProduct Information. Long-stroke gripper PHL 63
Product Informaton PHL Flexble. Precse. Powerful. PHL 2-fnger parallel grpper wth long jaw stroke for large parts and/or a broad range of parts Feld of applcaton Optmum standard soluton for many felds
More informationProduct Information. Gripper for small components MPG-plus
Product Informaton Grpper for small components MPG-plus MPG-plus Grpper for small components More powerful. Faster. Longer fngers. MPG-plus grpper for small components 2-fnger parallel grpper wth smooth
More informationProduct Information. Long-stroke gripper PHL 40
Product Informaton PHL Flexble. Precse. Powerful. PHL 2-fnger parallel grpper wth long jaw stroke for large parts and/or a broad range of parts Feld of applcaton Optmum standard soluton for many felds
More informationProduct Information. Gripper for small components MPG 32
Product Informaton MPG 32 MPG Precse. Compact. Relable. MPG grpper for small components 2-fnger parallel grpper wth smooth roller gudes of the base jaws Feld of applcaton Grppng and movng of small to medum-szed
More informationProduct Information. Gripper for small components MPG 80
Product Informaton MPG 80 MPG Precse. Compact. Relable. MPG grpper for small components 2-fnger parallel grpper wth smooth roller gudes of the base jaws Feld of applcaton Grppng and movng of small to medum-szed
More informationProduct Information. Gripper for small components MPG 50
Product Informaton MPG 50 MPG Precse. Compact. Relable. MPG grpper for small components 2-fnger parallel grpper wth smooth roller gudes of the base jaws Feld of applcaton Grppng and movng of small to medum-szed
More informationProduct Information. Universal gripper PGN-plus 200
Product Informaton PGN-plus 200 PGN-plus Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due to mult-tooth gudance. Feld
More informationProduct Information. Universal gripper PGN-plus 300
Product Informaton PGN-plus 300 PGN-plus Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due to mult-tooth gudance. Feld
More informationProduct Information. Gripper for small components MPG-plus 40
Product Informaton MPG-plus 40 MPG-plus More powerful. Faster. Longer fngers. MPG-plus grpper for small components 2-fnger parallel grpper wth smooth roller gudes of the base jaws Feld of applcaton Grppng
More informationProduct Information. Universal gripper PGN-plus 40
Product Informaton PGN-plus Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due to mult-tooth gudance. Feld of applcaton
More informationProduct Information. Universal gripper PGN-plus 160
Product Informaton PGN-plus 160 PGN-plus Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due to mult-tooth gudance. Feld
More informationProduct Information. Gripper for small components MPG-plus 32
Product Informaton MPG-plus 32 MPG-plus More powerful. Faster. Longer fngers. MPG-plus grpper for small components 2-fnger parallel grpper wth smooth roller gudes of the base jaws Feld of applcaton Grppng
More informationProduct Information. Universal gripper PGN-plus 80
Product Informaton PGN-plus 80 PGN-plus Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due to mult-tooth gudance. Feld
More informationProduct Information. Universal gripper PGN-plus-P 100
Product Informaton PGN-plus-P 100 PGN-plus-P Relable. Robust. Flexble. PGN-plus-P unversal grpper Unversal 2-Fnger Parallel Grpper wth permanent lubrcaton, large grppng force and hgh maxmum moments thanks
More informationReliable. Fully encapsulated. Loadable. DPG-plus Sealed Gripper
DPG-plus Reliable. Fully encapsulated. Loadable. DPG-plus Sealed Gripper Despite the high moment load of the base jaws, this sealed 2-finger parallel gripper conforms to the IP67 requirements and does
More informationDPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes
DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small
More informationPZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes. Gripping force 255 N N. Weight 0.
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationPZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes Gripping force 580 N..
PZN-plus Sizes 40.. 300 Weight 0.43 kg.. 43.5 kg Gripping force 580 N.. 38000 N Stroke per finger 3 mm.. 35 mm Workpiece weight 2.9 kg.. 190 kg Application example Insertion tool for assembling small to
More informationProduct Information. Sealed universal gripper DPG-plus 100
Product Information 100 Reliable. Fully encapsulated. Loadable. Sealed gripper Despite the high moment load of the base jaws, this sealed 2-finger parallel gripper meets the IP67 requirements, and does
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationMPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
More informationPFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
More informationBourdon tube pressure gauges for chemical applications with electrical contact
Electrcal contacts chemcal applcatons wth electrcal contact Measurng system fully welded to housng Robust mechatroncal pressure gauge Up to three contacts Tghtness-tested wth helum GOSSTNDRT-certfed Page
More informationLGZ. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes. Gripping force 120 N 1470 N. Weight 0.1 kg 0.
LGZ Sizes 16 5 Weight.1 kg.99 kg 12 N 147 N Stroke per finger 3 mm 7 mm Workpiece weight.6 kg 5.7 kg Application example Pneumatic transfer unit for round components 3-Finger Centric Gripper LGZ Linear
More informationProduct Information. Gripper for small components MPG 20
Product Information MPG 20 MPG Precise. Compact. Reliable. MPG gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application Gripping and moving
More informationPneumatic level indicator Unitel
Pneumatc level ndcator Untel Reference ponter for easy consumpton montorng Zero correcton possble Page 28 pplcaton For contnuous level measurement n tanks contanng fuel ol, desel fuel and ranwater. For
More informationProduct Information. Gripper for small components MPG-plus 16
Product Information MPG-plus 16 MPG-plus More powerful. Faster. Longer fingers. MPG-plus gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application
More informationPSH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Stroke per finger 14 mm.. 64 mm. Sizes
PSH Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading unit on a swivel head base.
More informationSPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
More informationLGR. Application example. Pneumatic 2-Finger Radial Gripper Universal Gripper. Sizes. Gripping moment 0.3 Nm 15 Nm. Weight 0.07 kg 1.
LGR Sizes 10 40 Weight 0.07 kg 1.27 kg Gripping moment 0.3 Nm 15 Nm Angle per jaw 90 Workpiece weight 0.07 kg 1066 kg Application example Rotational adjustment for reorientation of workpieces 2-Finger
More informationSizes Weight Gripping force Stroke per finger Workpiece weight Pieces : kg N mm kg
MPG-plus Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : 7 0.06.. 0.63 kg 25.. 350 N 1.5.. 10 mm 0.19.. 1.25 kg Application example Pneumatically driven, dual-axis pick-andplace
More informationPWG-S. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 5.98 Nm Nm. Weight 0.21 kg 1.
PWG-S Sizes 40 80 Weight 0.21 kg 1.2 kg Gripping moment 5.98 Nm 50.82 Nm Angle per jaw 20 Workpiece weight 1.1 kg 4.8 kg Application example Rotating/gripping combination for flexible handling of sheet
More informationLGP. Application example. Pneumatic 2-Finger Parallel Gripper Universal Gripper. Sizes. Gripping force 26 N 1090 N. Weight 0.03 kg 1.
LGP Sizes 8 4 Weight.3 kg 1.6 kg 26 N 19 N Stroke per finger 2 mm 13 mm Workpiece weight.13 kg 4.2 kg Application example Pneumatic double transfer unit 2-Finger Parallel Gripper LGP Universal Rotary Actuator
More informationLGP Pneumatic 2-Finger Parallel Gripper Universal Gripper Sizes Weight Gripping force Stroke per finger Workpiece weight
LGP Sizes 8.. 4 Weight.34 kg.. 1.5 kg 27 N.. 19 N Stroke per finger 2 mm.. 13 mm Workpiece weight.65 kg.. 2.5 kg Application example pneumatic double transfer unit 2-Finger Parallel Gripper LGP 2 Universal
More informationGWB Pneumatic 2-Finger Radial Gripper Universal Gripper Sizes Weight Gripping moment Opening angle per finger Workpiece weight
GWB Sizes 34.. 100 Weight 0.14 kg.. 3.5 kg Gripping moment 2.1 Nm.. 127 Nm Opening angle per finger 10.. 90 Workpiece weight 0.3 kg.. 6.0 kg Application example Rotating/gripping combination for handling
More informationSWG. Application example. Pneumatic 2-Finger Angular Gripper Angular Gripper for Small Components. Sizes Gripping moment 0.01 Nm.. 2.
SWG Sizes 10.. 50 Weight 2.5 g.. 213 g Gripping moment 0.01 Nm.. 2.8 Nm Opening angle per finger 15 Workpiece weight 0.007 kg.. 0.45 kg Application example Triple transfer unit for packaging with small
More informationBourdon tube pressure gauges for chemical applications with glycerine filling
Bourdon tube Bourdon tube pressure gauges for chemcal applcatons wth glycerne fllng EN 837- For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely robust desgn Can
More informationPFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N
PFH Sizes 30.. 50 Weight 2.65 kg.. 9.7 kg Gripping force 510 N.. 2650 N Stroke per finger 30 mm.. 50 mm Workpiece weight 2.55 kg.. 11.5 kg Application example Assembly unit for intermediate sleeves in
More informationBourdon tube pressure gauges for industrial applications
Pressure gauges Bourdon tube for ndustral applcatons EN 837- For machne and plant engneerng Robust steel or stanless steel housng Many customsed versons avalable A Page 54 Applcaton For gaseous and lqud
More informationPSH (inch version) Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Stroke per finger 14 mm.. 64 mm. Sizes 22..
PSH (inch version) Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg Gripping force 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading
More informationBourdon tube pressure gauges for chemical applications (glycerine filling) EN 837-1
Bourdon tube Pressure gauges Bourdon tube pressure gauges for chemcal applcatons (glycerne fllng) EN 837-1 For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely
More informationPGN. Application example. Pneumatic 2-Finger Parallel Grippers Universal Grippers. Gripping force 100 N N. Sizes
PGN Sizes 50.. 380 Weight 0.125 kg.. 28.0 kg Gripping force 100 N.. 15100 N Stroke per finger 2 mm.. 45 mm Force-fit gripping 0.5 kg.. 75.0 kg Application example Horizontal turning station with 180 reorientation
More informationBourdon tube pressure gauges for industrial applications EN 837-1
Pressure gauges Bourdon tube for ndustral applcatons EN 837-1 For machne and plant engneerng Robust steel or stanless steel housng Many customsed versons avalable A Page 386 Applcaton For gaseous and lqud
More informationStandard Bourdon tube pressure gauges EN 837-1
Bourdon tube Pressure gauges Standard Bourdon tube pressure gauges EN 837-1 For pneumatc and heatng system applcatons (e. g. pressure reducers, water flters) Desgn as per EN 837-1 Accuracy class 1.6 Corroson-resstant,
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Bourdon tube Pressure gauges for chemcal applcatons EN 837-1 For chemcal and process engneerng applcatons Measurng system fully welded to housng Extremely robust desgn For temperatures of the medum of
More informationHigh flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit
GSW-B-AGE High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit PGN-plus / PZN-plus universal gripper with shaft interface GSW-B and AGE compensation unit
More informationValVes InstrumentatIon Product overview
Valves Instrumentaton Product overvew Settng standards of perfecton and relablty ASV Stübbe s an nternatonal manufacturer of pumps, valves, nstrumentaton and control systems made of thermoplastcs. Products
More informationPneumatic Grippers Swivel Modules
Pneumatic Grippers Swivel Modules Pneumatic Grippers Swivel Modules ROTARY GRIPPERS MODULES Series Size Page GSM 748 Parallel Grippers GSM-P 750 GSM-P 32 754 GSM-P 40 760 GSM-P 50 766 GSM-P 64 772 Centric
More informationGrippers with Spindle Interface
Weight 0.8 kg.. 3.9 kg Gripping force 70 N.. 1200 N Stroke per finger 4 mm.. 10 mm Layout of the work area in the machining center Example of a handling and machining sequence: 1. Gripper removes blank
More informationTerminating Head
Termnatng Head 58246-1 Instructon Sheet for MTA- 100 Receptacle Connectors 408-6929 Usng Dscrete Wre 07 APR 11 Locatng Pawl Feed Slde Tool Base Wre Inserter Adjuster (Inserton Rod) Mass Termnaton Assembly
More informationPneumatic Gripping Modules. Pneumatic 2-Finger Radial Grippers
Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers 2-FINGER RADIAL GRIPPERS Series Size Page Universal Grippers GWB 676 GWB 34 680
More informationProduct Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
More informationGripping modules Pneumatic 2-finger parallel gripper Long-stroke gripper for small components Gripping force 120 N..
GM Sizes 85.. 205 Mass 0.48 kg.. 2.7 kg 120 N.. 595 N Stroke per finger 16 mm.. 30 mm Workpiece weight, force-fit gripping Up to 2.3 kg Application example 3 5 3 4 2 5 2 1 1 Pneumatic double pick & place
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationService Manual 3014 / Front-Side Applicator. Made in Germany
Servce Manual Front-Sde Applcator 3014 / 3016 Made n Germany 2 Servce Manual 2 for the followng products Famly Type Front-Sde Applcator 3014 3016 Edton: 05/2018 - Part No. 9009529 Copyrght Ths documentaton
More informationProduct Information. Gripper for small components MPC
Product Information MPC MPC Easy. Economical. Cost-effective. MPC Easily built up 2-finger parallel gripper with good price-performance ratio Field of application Gripping of small to mid-sized workpieces
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationMODEL : LDF7810WW/ LDF7810BB/ LDF7810ST LDF7811WW/LDF7811BB / LDF7811ST LDS5811WW/ LDS5811BB/ LDS5811ST LDF6810WW/LDF6810BB / LDF6810ST
_/ / _ III IRL III" Dshwasher MODEL : LDF7810WW/ LDF7810BB/ LDF7810ST LDF7811WW/LDF7811BB / LDF7811ST LDS5811WW/ LDS5811BB/ LDS5811ST LDF6810WW/LDF6810BB / LDF6810ST Please read ths manual carefully Retan
More informationFK240 FLAT SOLAR COLLECTORS ROOF-TOP INSTALLATION FOR WORCESTER SOLAR SYSTEMS
FK240 FLAT SOLAR COLLECTORS ROOF-TOP INSTALLATION FOR WORCESTER SOLAR SYSTEMS G INSTALLATION INSTRUCTIONS About ths manual Ths nstallaton manual contans mportant nformaton for the safe and approprate nstallaton
More informationInstrumentation. Pumps Valves Instrumentation
Instrumentaton Pumps Valves Instrumentaton Standards n perfecton and safety ASV Stübbe s an nternatonal manufacturer of pumps, valves, nstrumentaton and control systems made of thermoplastcs. As a system
More informationORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm.
Sizes 85 Weight 1.35 kg Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm Ring diameter I.D. Assembly appr. ø 10 mm.. ø 120 mm Application example Automatic machine for the internal or external assembly
More informationAMP-O-MATIC* Side-Feed Stripper-Crimper III Machine No [ ] customer manual TOOLING ASSISTANCE CENTER
AMP-O-MATIC* Sde-Feed Strpper-Crmper III Machne No. 1320895-[ ] Customer Manual 409-10012 28 DEC 11 SAFETY A. PRECAUTIONS READ THIS FIRST!............................ 2 customer manual 1. INTRODUCTION.......................................................
More informationA Prediction of Reliability of Suction Valve in Reciprocating Compressor
Purdue Unversty Purdue e-pubs nternatonal Compressor Engneerng Conference School of Mechancal Engneerng 1996 A Predcton of Relablty of Sucton Valve n Recprocatng Compressor W. H. You Samsung Electroncs
More informationsenes EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 o. 2 Double pneumatic control Spool valves series E
Spool valves plot and solenod actuated G 1/8 - G 1/4 - G 1/2 senes EK Valves seres "EK" are produced n tre 3/2, and pneumatc functons. The plotng solenod valve can be assembled perpendcular respect tre
More informationProduct Information. Gripper for small components RH 905
Product Information RH 905 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
More informationA Climbing Robot based on Under Pressure Adhesion for the Inspection of Concrete Walls
A Clmbng Robot based on Under Pressure Adheson for the Inspecton of Concrete Walls K. Berns, C. Hllenbrand, Robotcs Research Lab, Department of Computer Scence, Techncal Unversty of Kaserslautern P.O.
More informationEvaluation of a Center Pivot Variable Rate Irrigation System
Evaluaton of a Center Pvot Varable Rate Irrgaton System Ruxu Su Danel K. Fsher USDA-ARS Crop Producton Systems Research Unt, Stonevlle, Msssspp Abstrat: Unformty of water dstrbuton of a varable rate center
More informationOperating manual. ProSpray Airless high-pressure spraying unit. Model: Original operating manual. ProSpray 3.39
Operatng manual ProSpray.9 Arless hgh-pressure sprayng unt Model: 055808 Orgnal operatng manual ProSpray.9 Edton 5 / 04 0558 978L Warnng! Attenton: Danger of njury by njecton! Arless unts develop extremely
More informationChlorine ball-valve. Operating instructions. Read the operating manual! The user is responsible for installation and operation related mistakes!
Chlorne ball-valve Read the operatng manual! The user s responsble for nstallaton and operaton related mstakes! Orgnal operatng nstructons Dosng Conveyng Control Lquds Gases Systems Table of Contents
More informationFor models: 660 EF/EFO
Installaton Instructons Gas converson kts For models: 660 EF/EFO Part no. 660NGKIT/660LPKIT Warnng: Ths kt must be nstalled by a qualfed nstaller n accordance wth these nstructons and all applcable codes
More informationContractor's Material and Test Certificate for Underground Piping
UNDERGROUND PPNG 13-97 Contractors Materal and Test Certfcate for Underground Ppng PROCEDURE Upon completon of work, nspecton and tests shall be made by the contractors representatve and wtnessed by an
More informationENERGY SAVING IN THE HYDRAULIC CIRCUIT FOR AGRICULTURAL TRACTORS: FOCUS ON THE POWER SUPPLY GROUP.
ENERGY SAVING IN THE HYDRAULIC CIRCUIT OR AGRICULTURAL TRACTORS: OCUS ON THE POWER SUPPLY GROUP. Massmo Borgh, Barbara Zardn, rancesco Pntore, Engneerng Department Enzo errar, Unversty of Modena and Reggo
More informationit500 Internet Thermostat
T500 User Manual 16pp 025_Layout 1 03/09/2013 12:00 Page 1 T500 Internet Thermostat U S E R M A N U A L T500 User Manual 16pp 025_Layout 1 03/09/2013 12:00 Page 2 Product complance & safety nformaton These
More informationNEW PRODUCTS Petzl - Pascale Tournaire
NEW PRODUCTS 2016 Petzl - Pascale Tournare CONTENTS HELMET nfo ELIA METEOR ELIOS KIT VIA FERRATA REVERSO 4 VERSO ROPE nfo PUSH 9 mm PUSH 200 9 mm CLUB 10 mm CLUB 200 10 mm HELMETS BELAY DEVICES ROPES CARABINERS
More informationOperating manual. Airless high-pressure spraying unit Exclusive Suppliers of. Maxi Spray 21.XL (PS 3.20)
Operatng manual Arless hgh-pressure sprayng unt Exclusve Supplers of Max Spray.XL (PS.0) Edton 9 / 05 05 88A Orgnal Operatng Manual Warnng! Attenton: Danger of njury by njecton! Arless unts develop extremely
More informationResearch and Application of Work Roll Contour Technology on Thin Gauge Stainless Steel in Hot Rolling
Send Orders for Reprnts to reprnts@benthamscence.ae The Open Mechancal Engneerng Journal, 215, 9, 111-116 111 Open Access Research and Applcaton of Work Roll Contour Technology on Thn Gauge Stanless Steel
More informationMANUAL URBAN BIKE PURE CYCLING
B PURE CYCLING C MANUAL URBAN BIKE 1 13 2 3 4 5 6 7 8 9 10 11 12 e d c a b f 14 15 16 17 18 5 23 19 20 21 22 24 25 26 27 28 Your bcycle and ths bcycle manual comply wth the safety requrements lad down
More informationCombustion Manager W-FM / Installation and operating instruction. info. V esc SIEMENS LMV27.210A2WH W-FM5 VSD X64 AIR X56 VSD X74
BC X56 VD X74 CO X92 FUEL X54 X53 AIR X64 VD V h mn s esc 1 nfo 1 1 1 1 1 1 1 1 X75 X10-05 X10-06 X3-02 X5-03 X8-04 X8-02 X7-01 X3-04 E N L F A + X75 X10-05 X10-06 X3-02 X5-03 X8-0 X8-02 X7-01 L L N E
More informationNormal Safety Valves with spring loading. (AN) Model 295 and 296
GB-1 EN Model 295 Model 296 Thread connection Flange connection The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is
More informationMass Spectrometry. Fundamental GC-MS. GC-MS Interfaces
Mass Spectrometry Fundamental GC-MS GC-MS Interfaces Wherever you see ths symbol, t s mportant to access the on-lne course as there s nteractve materal that cannot be fully shown n ths reference manual.
More informationST70+ Installation Guide
87099_1.book Page Tuesday, January 27, 2009 12:45 PM ST70+ Installaton Gude Document reference: 87099-1 Date: January 2009 87099_1.book Page Tuesday, January 27, 2009 12:45 PM Autohelm, HSB, RayTech Navgator,
More information2-JAW PARALLEL GRIPPERS INSTALLATION SIZE GPP5006IL
2-JAW PARALLEL GRIPPER INTALLATION IZE GPP006IL PRODUCT PECIFICATION Gripping force diagram Forces and moments Displays static forces and moments that can also have an effect, besides the gripping force.
More informationI"IKOEHRING ~ CRANES& KOEHRING HYDRAULIC EXCAVATOR EXCAVATORS. 6620LC Beginning with Ser. No Serial No.
KOEHRNG 6620-7 HYDRAULC EXCAVATOR 6620LC Beginning with Ser. No. 7700 Serial No. "KOEHRNG ~ CRANES& Litho n USA Part No. ]226-47 "' ~ CRANES& KGEHRNG 4> PARTS GROUPS DESCRPTON Crawler & Carbody 0 0 0 0
More informationExperimental And Numerical Investigation Of The Flow Analysis Of The Water-Saving Safety Valve
Expermental And Numercal Investgaton Of The Flow Analyss Of The Water-Savng Safety Valve Muhammed Safa KAMER s PhD Student n Department of Mechancal Engneerng n Kahramanmaras Sutcu Imam Unversty, Turkey.
More information3-JAW CONCENTRIC GRIPPERS INSTALLATION SIZE GPD5006IL
3-JAW CONCENTRIC GRIPPER INTALLATION IZE GPD006IL PRODUCT PECIFICATION Gripping force diagram Forces and moments Displays static forces and moments that can also have an effect, besides the gripping force.
More informationHeavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
More informationPlanning of production and utility systems under unit performance degradation and alternative resource-constrained cleaning policies
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 Plannng of producton and utlty systems under unt performance degradaton
More informationAvailability assessment of a raw gas re-injection plant for the production of oil and gas. Carlo Michelassi, Giacomo Monaci
16 th IMEKO TC4 Symposum Explorng New Fronters of Instrumentaton and Methods for Electrcal and Electronc Measurements Avalablty assessment of a raw gas re-njecton plant for the producton of ol and gas
More informationMonitoring Physical Activity from Active Transport. Dr Russell G. Thompson Institute of Transport Studies Monash University
Montorng Physcal Actvty from Actve Transport Dr Russell G. Thompson Insttute of Transport Studes Monash Unversty Australan Health Gudelnes Put together at least 30 mnutes of moderatentensty physcal actvty
More informationASSEMBLY INSTRUCTIONS. TECHART roof spoiler
Part no. 070.100.650.009 Roof spoler Contents I Important safety nformaton...3 II Preparaton...5 III Installaton...6 1 Preparng the vehcle...6 2 Fttng the...6 3 Fnal nspecton...6 TECHART Verson 01 Page
More informationMANUAL ROAD BIKE PURE CYCLING. Your bicycle and this manual comply with the safety requirements of the EN ISO standard.
PURE CYCLING MANUAL ROAD BIKE 1 13 14 2 3 4 a 15 16 5 6 7 8 9 10 11 12 e d c b 17 18 19 20 21 22 23 24 25! Your bcycle and ths manual comply wth the safety requrements of the EN ISO 4210-2 standard.! Attenton!
More information