BOREWELL RESCUE ROBOT
|
|
- Andrea Lang
- 5 years ago
- Views:
Transcription
1 BOREWELL RESCUE ROBOT 1 Rajarathnam D.R.P, 2 Lakshmi Raj Thilak R, 2 Rithvik K, 2 Vignesh G, 2 Mohamed Marsook Hameed SH 1 AssociateProfessor, Department of Mechatronics Engineering, Paavai Engineering College, India 2 UG Scholar, Mechatronics Engineering, Paavai Engineering College, Namakkal, India ABSTRACT : The bore well accidents are now become common everywhere. Frequently we here news on child stuck in the bore well, some are being rescued and in some cases we lose to save the life of the child. The main objective of this project is to design and construct a portable robot which is cost effective, quick in action and accurate. The Bore well Rescue Robot is capable of moving inside the well and performs operations according to the user commands. The proposed model is designed to provide the child with two level of safety achieved by using robotic holding at the top and safety airbag at the bottom. This arrangement ensures that the child does not slip further deep during the rescue operation. The robot is operated by the human manually and monitor in computer.according to the observations made continuously using CCTV camera. KEYWORDS :Robotic arm, circular disk, Airbag, IR device I. INTRODUCTION Nowadays children falling in to the bore well seems common. Frequently we hear of news on children stuck in a bore well among various parts of India. In most of the cases of children falling into bore wells seem to occur in rural India. This says something about the bore well diameters. In the cities, bore wells are dug for domestic purposes. These are lesser in diameter. So looks like the bigger bore wells are the problem. Some manufacturing companies too dig large-diameter bore wells. These might be typically located in the villages. However, this is not the primary reason - in the villages, people constantly seek groundwater. The moment a farm or company needs water, they try to dig a well. However, open wells are not always the solution (open wells are dug when you have groundwater available easily at shallow depths. Open wells are convenient. But then groundwater is not easily available - thus bore wells are due to a greater depth. Also companies need more water and wells won t suffice). People need water and where does that come from? River or lake water supplies is not always available to all areas. Thus, groundwater is the source. And people dig to great depths to get groundwater. Groundwater for various reasons - summer, over exploitation, less recharge etc at times goes down deeper (water table). However, many of the bore wells do not yield water and are abandoned. The driller might have used casing and partially sealed the hole. Mostly, though the moment there is no water, the drillers pack up and leave. Vegetation takes over and these bore wells are forgotten. Someday a child wanders over and falls. in. The diameter is enough for the child to fall in. However, it takes time to realize that the lost child could have fallen into the bore well. The inside of the bore well now defunct or not used might have collapsed. Some bores are 300 feet deep (or more). The child might not always fall to the bottom but get stuck in the mud in between. This is not easy to find out as the hole is dark and deep. It is not a case of just pulling out the child through a vertical shaft. So rescue operations begin and sometimes if the child is closer to the surface a rescuer gets in and pulls them out. However, if the child has fallen to greater depths, a camera is sent into the hole and then a parallel bore is dug. From there another w w w. i j m r e t. o r g I S S N : Page 1
2 horizontal bore is dug. Quiet often the rescue succeeds but not always. A lot of Geology is involved and rescue plans must be fast and precise. But even with the best geophysical instruments, it is not easy to estimate the type and size of rock that blocks access to the point where the child is stuck. Moreover, drilling through rock can make the entire bore well collapse. So we found a simplest solution to rescue the child without any failures or causing injury to child while rescuing. The instrument we designed in capable moving inside the same bore well were the child is being stuck. First of all oxygen is supplied to avoid the inability of breathing of child. Then the instrument is sent into the well using the pulley. The camera with a high powered LED is used to find the location of child,the IR sensor is also added to detect the distance of the child to increase the accuracy. When the child is spotted, the instrument is fixed just above the child and the robotic arm holds the head for temporary safety and the gap between the child and well is spotted by the circular plate through the camera and the fiber cable is allowed to pass through the gap and the airbag is inflated under the child which sustains the child not to fall/slide anymore into the well. Then the whole system is pulled out by the pulley. Now the child could be rescued with high safety and without any injuries. II. HARDWARE COMPONENTS 2.1 Pulley : 2.2 CCTV CAMERA : CCTV (closed-circuit television) is a TV system in which signals are not publicly distributed but are monitored, primarily for surveillance and security purposes. CCTV relies on strategic placement of cameras, and observation of the camera's input on monitors somewhere. We use this to monitor the location of child and also to find the gap between the child and the well.\ 2.3 IR Sensor : Fig 2: Cctv camera An infrared sensor is an electronic instrument which is used to sense certain characteristics of its surroundings by either emitting and/or detecting infrared radiation. Infrared sensors are also capable of measuring the heat being emitted by an object and detecting motion. We use this to find the distance and location of the child in high accuracy. Fig 1: Pulley Pulley systems are used to provide us with a mechanical advantage, where the amount of input effort is multiplied to exert greater forces on a load. We use this to push and pull or lift the entire system and child in rescue operation. Fig 3: IR Sensor 2.4 PNEUMATIC VALVE : The pneumatic valve are used to control the pressure of compressed gases as well as the rate and direction of flow. This in turn controls the action of the device w w w. i j m r e t. o r g I S S N : Page 2
3 using the compressed air or gas. The pressure is applied through the pneumatic valve to stick the suction cup in the vertical pipe or hole and depressurize in the suction cup for holding the instrument steady for few minutes. cushion, a flexible fabric bag, inflation module. It is inflated under the child to avoid further sliding into the hole. Also it provides a basement for the child to pull up. 2.5 SERVO MOTOR : The Servo motors are used to control the movement of robotic arms and the rotation of circular disc to operate the instrument. They could operate at low speed and capable of operating on reasonable work load. Fig 5: Air bag III. METHODOLOGY Fig 4: Servo motor 2.6 ROBOTIC ARM : The Robotic arm is to hold the head of the child for comfort ability in rescue operation and to avoid collision child with the surface of well while rescuing which avoids injuries. It contains feature surface of easy holding. It is operated through the servo motor. 2.7 AIRBAG : An airbag is a type of vehicle safety device and is an occupant restraint system. The airbagmodule is designed to inflate extremely rapidly then quickly deflate during a collision or impact with a surface or a rapid sudden deceleration. It consists of the airbag The complete system is monitored and controlled by the operator based on provoking situation and difficulties. A small circular plate which contains a fiber cable is lowered down using the pulleys and chain. when the child is spotted using the IR device, The rotation of pulley stops and the circular disk is fixed stable using the pneumatic actuators. Now the disk is rotated to find the gap between the child and the hole. when the gap is spotted by the camera, The fiber cable is passed through the gap to the bottom of the child. Then the airbag is inflated using the compressor. Now the child is secured by not sliding further in to the well. After that the pneumatic actuator is released and the entire system is pulled up and the child is rescued safely. `In further implement if it is possible a closed mesh like structure will we formed around the child to rescue with much more safety. w w w. i j m r e t. o r g I S S N : Page 3
4 Fig 6: Conceptual Diagram w w w. i j m r e t. o r g I S S N : Page 4
5 IV.FLOWCHART Down the instrument with pulley Monitor the location of the child through IR sensor Is child located Extend the pneumatic actuator Hold the head through Robotic arm Rotate the circular disk and find the gap Insert the fiber cable Inflate the airbag Pull the entire system w w w. i j m r e t. o r g I S S N : Page 5
6 V.CONCLUSION At present, instruments or devices to rescue the child who stuck in the bore well is not moreover available in the fire stations because of lack of efficiency and possible of failures in existing instruments. So we designed a robot which is of high efficiency in rescuing the robot and there is no possibility of failures while rescuing. Also it is cost efficient so that the needed persons could afford it easily. The controlling is very easy and done by the operated by lively monitoring through the camera. Through this we can safeguard the child without any possibilities of failure and injury. REFERENCES [1] Manish Raj, P.Chakraborty and G.C.Nandi Rescue robotics in bore well Environment Cornell university library [v1] GMT (244kb). [2] O. Tatar, D. Mandru, Design of in-pipe modular robotic systems, Vol , pp , [3] J. Casper and R. R. Murphy, Human-robot interactions during the robot assisted urban search and rescue response at the world trade center, IEEE Trans. Syst., Man, Cybern. B, Cybern., Vol. 33, no. 3, pp , Jun w w w. i j m r e t. o r g I S S N : Page 6
Life Saving Machine Fig. 1 A typical bore well. With casing pipe removed, an original 6 inch bore can be up to 10 inch diia in the upper part.
Sridhar Palaniswamy Assistant Professor, Department of Electronics and Communication Engineering, Faculty of Engineering,Karpagam University, Echanari post,coimbatore, Tamil Nadu-India 641021 capsridhar@gmail.com
SMART AND SAFE CHILD RESCUE SYSTEM
Volume 119 No. 15 2018, 861-865 ISSN: 1314-3395 (on-line version) url: http://www.acadpubl.eu/hub/ SMART AND SAFE CHILD RESCUE SYSTEM http://www.acadpubl.eu/hub/ P.Sumathy A.Monika R. Dhanashree Assistant
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture
A Development of Mechanical Arm for Weight Scale Calibration
A Development of Mechanical Arm for Weight Scale Calibration Pattaraweerin Woraratsoontorn Department of Industrial Physics and Medical Instrumentation, Faculty of Applied Science, King Mongkut s University
STUDY OF UNDERWATER THRUSTER (UT) FRONT COVER OF MSI300 AUTONOMOUS UNDERWATER VEHICLE (AUV) USING FINITE ELEMENT ANALYSIS (FEA)
STUDY OF UNDERWATER THRUSTER (UT) FRONT COVER OF MSI300 AUTONOMOUS UNDERWATER VEHICLE (AUV) USING FINITE ELEMENT ANALYSIS (FEA) M. Sabri 1, 2, T. Ahmad 1, M. F. M. A. Majid 1 and A. B. Muhamad Husaini
Inflatable Packers for Grouting 11/10/00
Introduction Inflatable Packers for Grouting 11/10/00 Inflatable packers are frequently used for grout injection in geotechnical applications for structural reinforcement and/or water-proofing of foundations,
Figure 8: Looking Down on a Three Thruster Vehicle
Moving and Maneuvering 2 Cornerstone Electronics Technology and Robotics III (Notes primarily from Underwater Robotics Science Design and Fabrication, an excellent book for the design, fabrication, and
PROPOSAL OF FLUID SELF-EXCITED OSCILLATION PECULIAR TO A FLAT RING TUBE AND ITS APPLICATION
PROPOSAL OF FLUID SELF-EXCITED OSCILLATION PECULIAR TO A FLAT RING TUBE AND ITS APPLICATION Hideyuki Tsukagoshi 1, Ato Kitagawa, Keisuke Tambo, and Hiyoyuki Chiba ABSTRACT A novel fluid power actuator
GOLFER. The Golf Putting Robot
GOLFER The Golf Putting Robot Written By Wing Pan Yuen For EEL 5666 Intelligent Machines Design Laboratory December 05, 1999 Table of Contents Abstract Introduction Executive Summary Integrated System
Electronic Automatic Transmission for Bicycle
Electronic Automatic Transmission for Bicycle Team 4 Tianqi Liu, Ruijie Qi, and Xingkai Zhou ECE 445 Project Proposal Spring 2018 TA: Hershel Rege 1 Introduction 1.1 Objective Nowadays, an increasing number
k valve 2 (50)HF 2½ (65)SF installation guide aylesbury For valve sizes (DN): tel fax
aylesbury k valve installation guide For valve sizes (DN): 2 (50)HF 2½ (65)SF 3 (80)RB IMPORTANT Please keep for future reference. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND REFER TO ANY DIAGRAMS BEFORE
WORKHOLDING APPLICATION BOOKLET
WORKHOLDING APPLICATION BOOKLET Applications and advantages of using minibooster hydraulic pressure intensifiers MINIMUM SIZE MAXIMUM POWER B-GB Workholding 2018.04 1 of 20 2 of 20 B-GB Workholding 2018.04
Inflatable Standing Aid Device
Inflatable Standing Aid Device Design Team Travis Fulton, Megan McGuire James O Keefe, Justin Tichy, David Venturoso Design Advisor Prof. Andrew Gouldstone Abstract The purpose of this project is to design
Water Weir Flow Controller. Introduction. Safety Precautions. Mounting the Hardware
57007-88 Introduction Safety Precautions This instruction sheet describes how to set up and use the Hach (Figure 1). A water weir is a device that raises or diverts water to regulate the flow. Hach s water
(12) United States Patent
USOO7690411 B2 (12) United States Patent Wilson (10) Patent No.: (45) Date of Patent: US 7.690,411 B2 Apr. 6, 2010 (54) TIRE PRESSURE CONTROL SYSTEM (76) Inventor: Seth Wilson, 1218 Puerta Del Sol, San
Project Title: Pneumatic Exercise Machine
EEL 4924 Electrical Engineering Design (Senior Design) Preliminary Design Report 27 January 2011 Project Title: Pneumatic Exercise Machine Team Members: Name: Gino Tozzi Name: Seok Hyun (John) Yun Email:
Dry Hydrants. The installation of a non-pressurized pipe system into local water sources provides a ready means of supplying water to fire engines.
Dry Hydrants What is a Dry Hydrant? A dry hydrant is a non-pressurized pipe system permanently installed in existing lakes, ponds and streams that provides a suction supply of water to a fire department
RICK FAUSEL, BUSINESS DEVELOPMENT ENGINEER TURBOMACHINERY CONTROL SYSTEM DESIGN OBJECTIVES
RICK FAUL, BUSINESS DEVELOPMENT ENGINEER TURBOMACHINERY CONTROL SYSTEM DESIGN OBJECTIVES The primary design objective for any turbomachinery control system should be to maintain or maximize machine and
BIMBAR INFLATABLE PACKERS AND ACCESSORIES
BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced
1 SafeClaw Anchorage Connectors
Operations and Instruction Manual Model #4077 Portable Concrete Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn OHSA 1910.66 & 1926.502 Effective: 01/2012 Expires: 01/2022 IM-0050 REVA 1 SafeClaw Anchorage
COLD WATER STORAGE CONTROL AYLESBURY DELAYED ACTION FLOAT-ACTIVATED VALVES
COLD WATER STORAGE CONTROL AYLESBURY TM DELAYED ACTION FLOAT-ACTIVATED VALVES Keraflo have manufactured top quality, delayed action float valves in the UK for over 30 years. The Aylesbury TM range is synonymous
ENGINEERING FOR RURAL DEVELOPMENT Jelgava,
CONTRIBUTIONS TO DEVELOPMENT AND TESTING OF CENTRALIZED CONTROL SYSTEM OF INFLATION PRESSURE IN AGRICULTURAL TRACTOR TYRES ACCORDING TO SOIL AND WORKING CONDITIONS Simion Popescu 1, Sorin Boruz 2, Mihnea
Algorithm for Line Follower Robots to Follow Critical Paths with Minimum Number of Sensors
International Journal of Computer (IJC) ISSN 2307-4523 (Print & Online) Global Society of Scientific Research and Researchers http://ijcjournal.org/ Algorithm for Line Follower Robots to Follow Critical
POWER LIFT LOW PRESSURE LIFTING BAGS. Instructions for use
POWER LIFT LOW PRESSURE LIFTING BAGS Instructions for use The system of WEBER-HYDRAULIK low pressure lifting bags of the 0.5 and 1.0 bar series is used particularly for rescuing persons captured in various
Computer Aided Drafting, Design and Manufacturing Volume 26, Number 2, June 2016, Page 53. The design of exoskeleton lower limbs rehabilitation robot
Computer Aided Drafting, Design and Manufacturing Volume 26, Number 2, June 2016, Page 53 CADDM The design of exoskeleton lower limbs rehabilitation robot Zhao Xiayun 1, Wang Zhengxing 2, Liu Zhengyu 1,3,
A Distributed Control System using CAN bus for an AUV
International Conference on Information Sciences, Machinery, Materials and Energy (ICISMME 2015) A Distributed Control System using CAN bus for an AUV Wenbao Geng a, Yu Huang b, Peng Lu c No. 710 R&D Institute,
Comparative temperature measurements in an experimental borehole heat exchanger. Vincent Badoux 1, Rita Kobler 2
European Geothermal Congress 2016 Strasbourg, France, 19-24 Sept 2016 Comparative temperature measurements in an experimental borehole heat exchanger Vincent Badoux 1, Rita Kobler 2 1 GEOTEST AG, Bernstrasse
k valve ½ (15) ¾ (20) 1 (25) 1¼ (32) 1½ (40)HF 2 (50)SF installation guide aylesbury For valve sizes (DN):
aylesbury k valve installation guide For valve sizes (DN): ½ (15) ¾ (20) 1 (25) 1¼ (32) 1½ (40)HF 2 (50)SF IMPORTANT Please keep for future reference. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND REFER
MPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
Investigation of failure in performance of linear compressor & its rectifications
Investigation of failure in performance of linear compressor & its rectifications #1 M.B.Nirali, #2 Dr.V.K.Bhojwani #1 mechanical Engineering, Jscoe, Savitribai Phule Pune University, Pune India #2 mechanical
3/4 SafeClaw Anchorage Connectors
Operations and Instruction Manual Model #4075 Portable Concrete Anchorage Connector ANSI Z359.1-07 5,000 lbs / 22kn OHSA 1910.66 & 1926.502 Effective: 01/2012 Expires: 01/2022 IM-0049 REVA 3/4 SafeClaw
KAX VALVE ¾ (20) 1 (25) 1¼ (32) 1½ (40)HF 2 (50)SF INSTALLATION GUIDE AYLESBURY FOR VALVE SIZES (DN):
AYLESBURY KAX VALVE INSTALLATION GUIDE FOR VALVE SIZES (DN): ¾ (20) 1 (25) 1¼ (32) 1½ (40)HF 2 (50)SF IMPORTANT PLEASE KEEP FOR FUTURE REFERENCE. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND REFER TO ANY
Gripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
AutoDrill s OUTSTANDING FEATURES
PRODUCTION DRILLING & TAPPING SOLUTIONS Reduce Your Costs and Increase Your Production The Affordable, Powerful, Compact Solution AutoDrill s OUTSTANDING FEATURES Self Feeding with Air or Oil Thrust Capacity
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are
SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
Installation, Alignment, and Tensioning of a Silent Chain Drive
Exercise E223-S13-EXR-RV1.wpd Installation, Alignment, and Tensioning of a Silent Chain Drive Objective Using the IPT Industrial Trades Manual, the DAC Chain Drive Trainer, selected tools, and knowledge
CHAPTER 16 %UHDWKLQJ*DV0L[LQJ3URFHGXUHV
CHAPTER 16 %UHDWKLQJ*DV0L[LQJ3URFHGXUHV 16-1 INTRODUCTION 16-1.1 Purpose. The purpose of this chapter is to familiarize divers with the techniques used to mix divers breathing gas. 16-1.2 Scope. This chapter
Technical Data Sheet MF010-O-LC
Technical Data Sheet MF010-O-LC - 1 - 1. Properties The oxygen measuring system MF010-O-LC determines the oxygen content in gas mixtures up to a temperature of 250 C. It is particularly suitable for the
Level MEASUREMENT 1/2016
Level MEASUREMENT 1/2016 AGENDA 2 A. Introduction B. Float method C. Displacer method D. Hydrostatic pressure method E. Capacitance method G. Ultrasonic method H. Radar method I. Laser method J. Level
IWCF Equipment Sample Questions (Combination of Surface and Subsea Stack)
IWCF Equipment Sample Questions (Combination of Surface and Subsea Stack) 1. Given the volumes below, how much hydraulic fluid will be required to carry out the following operations (no safety margin)?
Wind turbine Varying blade length with wind speed
IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-issn: 2278-1676,p-ISSN: 2320-3331, PP 01-05 www.iosrjournals.org Wind turbine Varying blade length with wind speed Mohammed Ashique
Early evap monitors. Photo courtesy Toyota Motor Sales, U.S.A., Inc.; diagram courtesy University of Toyota
Early evap monitors checked for leaks greater than.040 in. (1mm), but starting in model year 2000, the allowable leak was reduced to.020 in. (.5mm), which was phased in over several years. The reduced
Introduction to Pumps
Introduction to Pumps 1 Introduction to Pumps 1.0 INTRODUCTION There are many different types of pump now available for use in pumped fluid systems. A knowledge of these pump types and their performance
Hot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
User Instructions Series Descent Device
User Instructions - 199 Series Descent Device This document serves as the Manufacturer s Instructions, and is to be used as part of an employee training program for the system, as required by OSHA. ATTENTION:
Safety, Operating and Maintenance Manual. TRAIN Rat DS9-TRAIN
Safety, Operating and Maintenance Manual TRAIN Rat DS9-TRAIN Industry s first air powered entry tool! Quickly, quietly and reliably opens passenger train doors! Introducing the TRAIN Rat. This innovative
The Caddiellac. In the pursuit of perfection on the course, your clubs should follow your lead EE High Level Design
The Caddiellac In the pursuit of perfection on the course, your clubs should follow your lead EE41430 High Level Design Ryan Bernhold Matt DePorre Rachel Drumm Colleen Tigani Table of Contents 1. Introduction
Basic Pneumatics. Module 2: Direct Control of single acting cylinder PREPARED BY. IAT Curriculum Unit. January 2011
Basic Pneumatics Module 2: Direct Control of single acting cylinder PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 20011 Module 2: Direct Control of single acting cylinder
RST INSTRUMENTS LTD.
RST INSTRUMENTS LTD. Borehole Packers Instruction Manual Copyright 2016 Ltd. All Rights Reserved Ltd. 11545 Kingston St., Maple Ridge, B.C. Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005 Email:
Vibration and Pulsation Analysis and Solutions
1 Vibration and Pulsation Analysis and Solutions Brian Howes, M.Sc., P.Eng. Beta Machinery Analysis Ltd. Problems created by excessive vibration in machinery can have serious economic impact. Frequently
MS.RAJA ELGADY/PRESSURE PAPER 3
1- (a) A water tank has a rectangular base of dimensions 1.5m by 1.2m and contains 1440 kg of water. Calculate (i) the weight of the water, weight =...... [1] (ii) the pressure exerted by the water on
SEMIC05 Installing mechanical equipment
Overview This unit identifies the competences you need to install mechanical equipment, in accordance with approved procedures. This will require you to survey the site for the proposed installation, and
Introduction to Pneumatics
Introduction to Pneumatics Pneumatics Symbols Air generation and distribution Table 1: Symbols use in energy conversion and preparation ITEM SYMBOL MEANING Compressor SUPPLY Pressure Source Pneumatic Pressure
Warnings: Notes: Revised: January 8,
OAI Model 204IR Mask Aligner Standard Operating Procedure Faculty Supervisor: Prof. Robert White, Mechanical Engineering (x72210) Safety Office: Peter Nowak x73246 (Just dial this directly on any campus
Model Description
LEAKHUNTER Plus LEAKHUNTER Plus Model 8066 Description The MATHESON LEAKHUNTER Plus is a truly universal leak detector. Extensive R&D has produced a multi-functional leak detector engineered to perform
Bulletin /06/2012 Supersedes 10/23/00. Installation of John Crane Type 73 Inflatable Mechanical Seal. Page 01 of 10
01 of 10 1. Carefully read all instructions and notes before installation. 2. Bench Pre-assembly: a. Insert the support ring (item #1) inside the inflatable boot (item #2) to form inflatable seal assembly
EWC EARLY WARNING CONTROL OPERATIONAL PRESENTATION. Charles Dickens (757)
EARLY WARNING CONTROL OPERATIONAL PRESENTATION Charles Dickens (757) 831-2626 Controls still continue to use the foundations of technologies that were developed in the 1970 s. Because of the perceived
USER GUIDE / PRODUCT MANUAL
1234 Main St. Swartz Creek, MI 48420 Phone support: 1 888 555 0123 support@sandaconda.com The Sandaconda Anchor System USER GUIDE / PRODUCT MANUAL For more information, please visit us atsandaconda.com
Modeling of Hydraulic Hose Paths
Mechanical Engineering Conference Presentations, Papers, and Proceedings Mechanical Engineering 9-2002 Modeling of Hydraulic Hose Paths Kurt A. Chipperfield Iowa State University Judy M. Vance Iowa State
Elimination of Oil Residual inside the Copper Pipe Using Ladder Technique
Engineering, 2013, 5, 8-15 http://dx.doi.org/10.4236/eng.2013.51002 Published Online January 2013 (http://www.scirp.org/journal/eng) Elimination of Oil Residual inside the Copper Pipe Using Ladder Technique
icreasepro Creaser Operators Manual
6-2013 Version 3.0 icreasepro Creaser Operators Manual WWW.MBMCORP.COM 800-223-2508 TABLE OF CONTENTS SPECIFICATIONS.1a SAFETY PROCEDURES/CARE & MAINTENANCE..1b COMPONENT IDENTIFICATION 2 TOUCH SCREEN
Design, Static Structural & Model Analysis of Water Ring Vacuum Pump Impeller
IJSRD - International Journal for Scientific Research & Development Vol. 6, Issue 03, 2018 ISSN (online): 2321-0613 Design, Static Structural & Model Analysis of Water Ring Vacuum Pump Impeller Ajay A.
The Cyclone Tire Deflation & Inflation Tool
The Cyclone Tire Deflation & Inflation Tool How it works; This tool operates on compressed air that activates our patent pending venturi that creates a ultra-high vacuum, that draws the air from inside
Hitching Horses to Get the Most Work Done
July, 1924 Circular No. 283 UNIVERSITY OF ILLINOIS AGRICULTURAL COLLEGE AND EXPERIMENT STATION Hitching Horses to Get the Most Work Done BY E. W. LEHMANN AND E. T. R obbins TH LIRPARV or THE SEP 17 LY.24
Figure 1: Hydrostatic Pressure Forces Are Perpendicular to the Surface
Pressure Hulls and Canisters 2 Cornerstone Electronics Technology and Robotics III (Notes primarily from Underwater Robotics Science Design and Fabrication, an excellent book for the design, fabrication,
The Future of Hydraulic Control in Water-Systems
The Future of Hydraulic Control in Water-Systems A. Heimann Manager of R&D and of Technical Support & Applications Engineering departments at Dorot Automatic Control Valves Dorot Control Valves, Kibbutz
NATIONAL INSTRUMENTS AUTONOMOUS ROBOTICS COMPETITION Task and Rules Document
NATIONAL INSTRUMENTS AUTONOMOUS ROBOTICS COMPETITION 2018 2018 Task and Rules Document Table of Contents Competition Background:... 2 Theme: Autonomous Vehicles Fast Track to the Future... 2 Design Elements
Keywords--Bio-Robots, Walking Robots, Locomotion and Stability Controlled Gait.
Six Legged Locomotion on Uneven Terrain Kale Aparna S., Salunke Geeta D. kaleaparna5@gmail.com, geetasalunke@gmail.com Abstract -In this paper current state of many walking robots are compared and advantages
Crab and Lobster Live Holding System Part II (Water Pumps, Air Pumps and Pipework)
Crab and Lobster Live Holding System Part II (Water Pumps, Air Pumps and Pipework) 1990/2/SF/AM The increased demand for crabs and lobsters, and the requirement to export live shellfish has led to the
955108_2. AirForce Operator s Guide
955108_2 AirForce Operator s Guide Contents System Setup and Operation...3 AirForce Setup...3 Load Cells...6 AirForce Control...8 How to Set AirForce...11 Home Screen...13 AirForce Diagnostic Information...15
Robot Arm Challenge Answer Key
Youth Explore Trades Skills Fluid Power Worksheet These are some of the words and ideas that engineers use when working with fluid power. They are also used by mechanics and equipment operators when controlling
JACKHAMMER SAFETY TRAINING
JACKHAMMER SAFETY TRAINING The aim of the instructions is to provide you with knowledge of how to use the Pneumatic breaker in an efficient, safe way. The instructions also give you advice and tell you
RAPID INTERVENTION CREW TEAMS
RAPID INTERVENTION CREW TEAMS Arlington Fire Department Fire Training Academy January 1998 PURPOSE STATEMENT The purpose of this month s program is to present guidelines and practices of a basic Search
Design Optimization for the Discharge System of the Rotary Compressor Using Alternative Refrigerant R410a
Purdue University Purdue epubs International Compressor Engineering Conference School of Mechanical Engineering 1998 Design Optimization for the Discharge System of the Rotary Compressor Using Alternative
DPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes
DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small
Cambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *8269683414* PHYSICS 0625/31 Paper 3 Extended October/November 2014 1 hour 15 minutes Candidates
(Refer Slide Time: 0:26)
Fundamentals of Industrial Oil Hydraulics and Pneumatics By Professor R. Maiti Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Module03 Lecture08 Different Types of Valves-
MODEL HICV-130Ti7-331N. Lot NAGOYA JAPAN PAT.
MODEL 9 The HICV Series of self control valves are highly accurate, maintaining a constant rate of outlet pressure and flow regardless of variations in pressure at the point of entry. Creation of reliable
Assembling and testing fluid power systems
Unit 020 Assembling and testing fluid power systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
The Soccer Guy. By Marcus Hilgers Faisal Ahmad Jacob Borer
The Soccer Guy By Marcus Hilgers Faisal Ahmad Jacob Borer 1.0 Abstract The Soccer Guy automaton was created to provide a fun, interactive, simple game. It uses simple mechanical and computational elements
The Ins and Outs of I/P Transducers
The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas
Pool Tip #16: Effective Pool Barriers
Pool Tip #16: Effective Pool Barriers Effective barriers are needed to prevent unattended children from gaining access to a pool or pool area when the pool is temporarily closed between class sessions
Recommendations for Marking Gas Facilities Using 3M EMS Electronic Markers
Recommendations for Marking Gas Facilities Using 3M EMS Electronic Markers Ball Marker Near-Surface Marker A small marker which is well-suited for bore holes in concrete or asphalt for marking flush-mount
Assembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for
MEDICAL GAS OUTLETS & PROBES
MEDICAL GAS OUTLETS & PROBES Quick-connect medical gas outlets for operative connection of the medical equipment to medical gas supply systems TECHNICAL DATA Maximum inlet pressure to 10 bar Vacuum rarefaction
Made in the USA. For Fall Protection Only. SafeLok Part Description
Operations and Instruction Manual SafeLok Anchorage - Model # 4011 IM-0051 REV A Portable Concrete and Steel Anchorage Connector ANSI Z359.1-07 5,000 lbs / 22kn Made in the USA The 3/4 Fall Protection
Exercise 2-3. Flow Rate and Velocity EXERCISE OBJECTIVE C C C
Exercise 2-3 EXERCISE OBJECTIVE C C C To describe the operation of a flow control valve; To establish the relationship between flow rate and velocity; To operate meter-in, meter-out, and bypass flow control
Products For The. Fire & Emergency Services. Cintec International Limited
Products For The Fire & Emergency Services Cintec International Limited Waterwall Isolation Units Acetylene Isolator Specifications: External Height External Width External Depth Internal Height Internal
PFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N
PFH Sizes 30.. 50 Weight 2.65 kg.. 9.7 kg Gripping force 510 N.. 2650 N Stroke per finger 30 mm.. 50 mm Workpiece weight 2.55 kg.. 11.5 kg Application example Assembly unit for intermediate sleeves in
Body Stabilization of PDW toward Humanoid Walking
Body Stabilization of PDW toward Humanoid Walking Masaki Haruna, Masaki Ogino, Koh Hosoda, Minoru Asada Dept. of Adaptive Machine Systems, Osaka University, Suita, Osaka, 565-0871, Japan ABSTRACT Passive
Product Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
PFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
TAM Single SeT inflatable
TAM Single SeT inflatable ReTRievAble PAckeRS Sets with pressure only Releases with straight pull or rotate Ideal for horizontal applications Sets in casing or open hole Runs on tubing, coiled tubing,
Item 404 Driving Piling
Item Driving Piling 1. DESCRIPTION Drive piling. 2. EQUIPMENT 2.1. Driving Equipment. Use power hammers for driving piling with specified bearing resistance. Use power hammers that comply with Table 1.
Schilling Robotics TITAN 4 Manipulator
PRODUCT DATASHEET SUBSEA TECHNOLOGIES Schilling Robotics TITAN 4 Manipulator We put you first. And keep you ahead. Thousands of our manipulator systems are in use worldwide every day. TITAN manipulators
Specifications for Synchronized Sensor Pipe Condition Assessment (AS PROVIDED BY REDZONE ROBOTICS)
Specifications for Synchronized Sensor Pipe Condition Assessment (AS PROVIDED BY REDZONE ROBOTICS) A. Scope of Work The work covered by these specifications consists of furnishing all materials, labor,
Recommendations for Marking Communication Facilities
Recommendations for Marking Communication Facilities with the Use of 3M EMS Electronic Markers Revised June 21, 2005 Page 1of 12 1.0 Overview The 3М TM electronic marker system is intended to make the
An introduction to Rigging for Trail Work
An introduction to Rigging for Trail Work Give me a lever long enough and a prop strong enough, I can single handed move the world. Archimedes The purpose of this seminar is to provide a hands-on introduction
COLD WATER STORAGE CONTROL AYLESBURY TM FLOAT VALVE RANGE
COLD WATER STORAGE CONTROL AYLESBURY TM FLOAT VALVE RANGE Keraflo have manufactured top quality, delayed action float valves in the UK for over 30 years. The Aylesbury TM range is synonymous with float