YZ-Series Pump Heads
|
|
- Sherman Jessie Hardy
- 6 years ago
- Views:
Transcription
1 Operation Manual for YZ-Series Pump Heads PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel Tel: , Fax: mrc@mrclab.com MRC.VER
2 IMPORTANT INFORMATION: Please read operation manual carefully before operation. WARNINGS: Tubing breakage may result in fluid sprayed from pump. Use appropriate measures to protect operator and equipment. Please check the tubing frequently and change the tubing in time. If the power line or the plug is worn or damaged please pull out the plug (Hold the plug not the power line when pulling out). Please shut down the power supply and pull out the plug when meet below circumstances (Hold the plug not the power line when pulling out). The fluids splash on the body of the pump. You think the pump needs to be maintained or repaired. TABLE OF CONTENTS Introduction and general description YZ1515,YZ2515 YZ1515x,YZ2515x YZ1515w pump head direction for use YZ35,YZ35-13 pump head direction for use Product maintenance Warranty Pump head loading pump head direction for use Please shut down the power supply before install the external control equipments.
3
4
5
6
7 Operation Manual for Pump Heads PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel Tel: , Fax: mrc@mrclab.com MRC.VER
8 Instruction YZII series pump heads have good appearance and compact size. The tubing retention set is a linkage, it is convenient to load the tubing; Accept several tubing sizes for a wide flow range; The rollers adopt high quality materials and has good wearing property; The housing material is PESU. It has perfect rigidity and structure property. It is stable and autoclavable Tubing Loading Lever 1. Pull the Levers according to t h e a r r o w h e a d d i r e c t i o n s simultaneously and open the Compression Block. Prompt The levers in both sides need to be pulled simultaneously. Features Table Pump Head Tubing Speed (rpm) Flow Rate (ml) Tubing Clamp 2. The Tubing Clamp and the Compression Block is linkage. Tubing retention is automatic. Pump Head Part Number Single Pump Head Multiple Pump Heads Roller Material RULON J Housing Material Weight (kg) 3. Pull the Levers according to t h e a r r o w h e a d d i r e c t i o n s simultaneously and close the Compression Block. Warning: Tubing must be checked and changed frequently, as tubing may be burst because ofl ong time wear. The leaking fluid may result in the injury of operator or damage of the equipment. Structure Maintenance Lever Compression Block Support Block Note The material of pump head is not organic solvent Base Tubing Clamp Mounting Hole resistant. When the pump is idle, we recommend you to release the tubing from pressure. This helps to protect the tubing from unnecessary strain and prolongs its service life Keep rollers clean and dry. This will prolong the service lives of tubing and pump head. The materials of pump head are not organic solvent and aggressive liquids resistant. Please pay attention when using. Note If a trouble happens, please contact us or our dealers. Warranty The warranty period for this product is one year. If repair or adjustment is necessary within the warranty period, the problem will be corrected at no charge ifi t is not due to misuse or abuse on your part, as determined by the manufacturer. Repair costs outside the warranty period, or those resulting from product misuse or abuse, may be invoiced to you. Pump Head Installation Dimensions Mounting Hole Insert the two mounting screws into the mounting holes of the pump head. Insert the flat end of the pump head's shaft to the slot of drive's coupling. Then tighten the mounting screws to connecting hole of drive. Stack pump heads need ( ) pump heads and long mounting screws Φ Φ ( ) Unit: mm Long Mounting Screw ( ) Note Try your best to tighten the two screws in the same degree. Do not over-tighten the screws to prevent the support block from deforming and noises during running.
9 Operation Manual for Pump Heads PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel Tel: , Fax: mrc@mrclab.com MRC.VER
10
11
12 Operation Manual for Pump Heads PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel Tel: , Fax: mrc@mrclab.com MRC.VER
13
14
15
16
17
18
400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO
400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand
More informationMultichannel Pump Head pages 1-8. Tête de pompe multicanal pages F1-F8. Mehrkanal- Pumpenkopf Seiten D1-D8
OPERATING MANUAL: Multichannel Pump Head pages 1-8 NOTICE D UTILISATION: Tête de pompe multicanal pages F1-F8 BEDIENUNGSANLEITUNG: Model Nos. Nº de modèle Modellnummern Modelo No. Modello No. 07534-04
More informationAdjustable. Unloader Valve. O&M Manual. Part #
Adjustable Unloader Valve O&M Manual Unloader Valve Part #60-020-361 ADVANCED PRESSURE SYSTEMS 701 S. Persimmon St., Suite 85 - Tomball, TX 77375 Toll Free in North America: (877) 290-4277 Phone: (281)
More information100C Air Compressor Kit
10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is
More information200 PSI COMPRESSORS - MODEL NUMBERS
200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read
More information420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO
420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this
More informationOPERATING MANUAL FOR ALL MODELS OF EASY-LOAD PUMP HEADS
OPERATING MANUAL FOR ALL MODELS OF EASY-LOAD PUMP HEADS A-1299-0722 Edition 09 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (Outside U.S.) (847) 549-7600 (Local) www.masterflex.com
More information444C DUAL PERFORMANCE VALUE PACK
(Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.
More informationMODEL NUMBER: PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or Electrocution: MODEL NUMBER: 20008 200 PSI AIR SOURCE KIT 200 PSI Compressor on 2.0 Gallon 200 PSI Air Tank IMPORTANT: It is
More informationVibration isolation system 1VIS10W. User manual
Vibration isolation system 1VIS10W User manual Standa 2014 Table of contents 1. General information 3 1.1. Introduction 3 1.1.1. Safety 5 1.2. Location of the table 5 1.3. Air supply requirements 5 2.
More informationAC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight
Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this
More informationMODEL NUMBER: M20005 AIR SOURCE KIT. 30% Duty Compressor on. 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE
MODEL NUMBER: M20005 AIR SOURCE KIT 30% Duty Compressor on 2.0 Gallon Air Tank SAVE THIS MANUAL FOR FUTURE REFERENCE USER MANUAL IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock
More information200 PSI HIGH-FLOW AIR SOURCE KIT
200 PSI HIGH-FLOW AIR SOURCE KIT 50% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20008 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More information200 PSI FAST-FILL AIR SOURCE KIT
200 PSI FAST-FILL AIR SOURCE KIT 55% Duty Compressor on 2.0 Gallon Air Tank PART NO. 20007 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More information97C COMPRESSOR KIT 12V PART NO C COMPRESSOR KIT 24V PART NO C COMPRESSOR KIT PART NO
97C COMPRESSOR KIT 12V PART NO. 00097 97C COMPRESSOR KIT 24V PART NO. 02497 98C COMPRESSOR KIT PART NO. 00098 97C 98C IMPORTANT: It is essential that you and any other operator of this product read and
More informationCUT OFF TOOL MODEL: CAT113
CUT OFF TOOL MODEL: CAT113 Part No: 3120135 ASSEMBLY & INSTRUCTION MANUAL LS0309 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you
More informationINFUSION SYSTEM (110V) (220V) USER S MANUAL
INFUSION SYSTEM 20-6000-00 (110V) 20-6005-00 (220V) USER S MANUAL 8000 South Kolb Road Tucson, AZ 85756 Phone 800.528.1597 Fax 520.885.1189 www.wellsgrp.com email: sales@wellsgrp.com GENERAL DESCRIPTION
More information480C DUAL PERFORMANCE VALUE PACK
(Pewter) PART NO. 48012 (Chrome) PART NO. 48032 (Stealth Black) PART NO. 48042 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More informationOPERATING MANUAL EASY-LOAD PUMP HEADS
OPERATING MANUAL EASY-LOAD PUMP HEADS A-1299-0377 Edition 14 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (Outside U.S.) (847) 549-7600 (Local) www.masterflex.com techinfo@coleparmer.com
More informationG R AV I T Y B I K E S TA N D OWNER S MANUAL
G R AV I T Y B I K E S TA N D OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service
More informationWafer Check Valve. Contents. User s Manual. (1) Be sure to read the following description of our product warranty 1
Serial No. H-V066-E-3 Wafer Check Valve User s Manual Contents (1) Be sure to read the following description of our product warranty 1 (2) General operating instructions 2 (3) General instructions for
More information42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only)
42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) 42047 Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only) 45052 Constant Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor
More informationOPERATING MANUAL EASY-LOAD PUMP HEADS
OPERATING MANUAL EASY-LOAD PUMP HEADS Cole Parmer Cole-Parmer Instrument Co. 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) 11 (847) 549-7600 (outside U.S.) (847) 549-7600 (Local) www.masterflex.com
More informationREVERSIBLE AIR DRILL
REVERSIBLE AIR DRILL MODEL NO: CAT87 PART NO: 3110835 OPERATING & MAINTENANCE INSTRUCTIONS GC0613 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill Before attempting to use this product,
More informationA. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
More informationAIR HAMMERS MODEL NO: CAT138/CAT139 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: / GC064
AIR HAMMERS MODEL NO: CAT138/CAT139 PART NO: 3120152 /3120153 OPERATING & MAINTENANCE INSTRUCTIONS GC064 INTRODUCTION Thank you for purchasing this CLARKE Air Hammer. Before attempting to use this product,
More informationCompact Ball Valves ASAHI AV VALVES. Contents. User s Manual. (Page) (1) Be sure to read the following warranty clauses of our product 1
Serial No. H-V030-E-5 Compact Ball Valves User s Manual Contents (Page) (1) Be sure to read the following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instructions
More informationOPERATION & MAINTENANCE INSTRUCTIONS
1 /2 REVERSIBLE AIR DRILL MODEL NO: CAT123 PART NO: 3110879 OPERATION & MAINTENANCE INSTRUCTIONS GC1110 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More informationREV0709. Parts List. Hydraulic Cylinder Model MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER. Max. Capacity: 55.2 Tons at 10,000 PSI
REV0709 Parts List Hydraulic Cylinder Model 10312 MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER Max. Capacity: 55.2 Tons at 10,000 PSI REV0709 Item No. Part No. No. Req d Description 1 10606
More informationWATER SLIDE. Limbo Beach
84694 Limbo Beach WATER SLIDE IMPORTANT SAFETY INSTRUCTIONS. PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. FOR AGES 5-12 ADULT
More informationSteel Spring Driven Reel Instruction Manual
Steel Spring Driven Reel Instruction Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More information4 ANGLE GRINDER MODEL NO: CAT 52 PART
4 ANGLE GRINDER 4 ANGLE GRINDER MODEL NO: CAT 52 PART No: 3110685 OPERATION & MAINTENANCE INSTRUCTIONS 0807 Fig.1 SPECIFICATIONS Model:...CAG52 Part Number:...3110685 Rated Wheel...Capacity: 4 x 1/4 (type
More informationHYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL
HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual
More information5 Gallon Pressure Pot with HVLP Spray Gun and Hose
California Air Tools 5 Gallon Pressure Pot with HVLP Spray Gun and Hose Model No. 365 Technical Data Type of feed.pressure Maximum pressure in the tank... 0,413Mpa (60PSI) Working pressure in the tank.0,
More informationDUAL ACTION SANDER MODEL NO: CAT121 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0211
DUAL ACTION SANDER MODEL NO: CAT121 PART NO: 3110877 OPERATION & MAINTENANCE INSTRUCTIONS LS0211 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please
More informationProduct instruction manual Easymount Sign Laminators EM-S1400C, EM-S1600C, EM-S1400H, EM-S1600H
Product instruction manual Easymount Sign Laminators EM-S1400C, EM-S1600C, EM-S1400H, EM-S1600H The Easymount Sign has been designed to be user friendly, however we strongly recommend you take a few minutes
More informationINSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield
More informationEVO Solid Downtube. Operators Manual for Downtubes fitted with zinc plated springs June 2004
EVO Solid Downtube Operators Manual for Downtubes fitted with zinc plated springs June 2004 Read this manual fully before operating the EVO Solid Downtube For all EVO Shearing Plants Head Office 46 Miguel
More informationSPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
More informationAIR DRIVE ROLL FEED CARTON STAPLER MODEL: H-1031 MANUAL
AIR DRIVE ROLL FEED CARTON STAPLER MODEL: H-1031 MANUAL WARNING Before operating this stapler familiarize yourself with the safety warnings and instructions in this manual. Keep these instructions with
More informationATEX ATEX
OPERATING MANUAL: HIGH-PERFORMANCE PUMP HEAD Model Nos. MASTERFLEX L/S 77252-62 77252-60 77252-62 77252-70 77252-72 77252-80 ATEX 77252-82 ATEX A-1299-7353 Edition 01 (US & Canada only) Toll Free 1-800-MASTERFLEX
More informationModel PSI Compressor with 3-Gallon Air Tank 12VDC
Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing
More informationRetractable Hose Reel with 3/8" x 50' PVC Hose
Retractable Hose Reel with 3/8" x 50' PVC Hose Item# 4816153 Owner s Manual Assembly and Operation Instructions MADE IN CHINA Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before
More informationCHEMICAL INDUCTION KIT (Pt.No Issue 6, October 2015)
CHEMICAL INDUCTION KIT (Pt.No.2400-0740 Issue 6, October 2015) DESCRIPTION The C-Dax Chemical Induction Kit is an accessory kit for the GoldLine range of three point linkage sprayers. The system operates
More informationACCU-PULSE Installation and Operation Instructions
ACCU-PULSE Installation and Operation Instructions Pump Discharge Installation: Chargeable Models Step 1: Mounting Position Mount ACCU-PULSE as close to the pump discharge as possible to absorb the pulse
More informationOperating Instruction Manual for Liquid Nitrogen Containers. CRY/CRYC Series. Hagavish st. Israel Tel: , Fax:
Operating Instruction Manual for Liquid Nitrogen Containers CRY/CRYC Series Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.12.14 TO USER Thank You! You have just purchased
More informationPressure Relief Valve Instruction Manual
CVR3-M0_062017 Pressure Relief Valve Instruction Manual MODEL: CVR3 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website:
More informationAIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.
2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials
More informationVessel Installation and Operating Manual
For In-ground and Aboveground Pools Vessel Installation and Operating Manual Important Safety Information Please read this manual prior to installation. Nature 2 Express is designed to sanitize in-ground
More informationQuattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1
Quattrocycle User Manual Last update February 2010 Quattrocycle BV Bremkant 6 5091 EJ Middelbeers User Manual Quattrocycle 1 Table of Contents Page Chapter 1: Introduction 3 Chapter 2: Instructions for
More informationFisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves
Instruction Manual Lever-Lock Handlever Actuator Fisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications...
More informationINSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals
INSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals A. Description of Seal Assembly B. Installation C. Piping D. Testing for undocking E. Installation check seat F. Operation G. Sealing
More informationSIGNATURE DEF REELS Models: Bare Reel Reel Reel Reel
SERVICE BULLETIN SB2023 Rev C 7/11 SIGNATURE DEF REELS Models: 2400-006 Bare Reel 2400-007 16 Reel 2400-008 20 Reel 2400-009 30 Reel Thoroughly read and understand this manual before installing, operating
More informationULTRA-LIGHT DUTY ONBOARD AIR SYSTEM
ULTRA-LIGHT DUTY ONBOARD AIR SYSTEM PART NO. 10000 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using
More informationINSTALLATION & MAINTENANCE INSTRUCTION
ARCHON Industries, Inc Liquid Level Gauges Models: BT-LLG ND-LLG INSTALLATION & MAINTENANCE INSTRUCTION Instruction No.: 1014.2 Revision Issued: 3/01/03 Approved: Engineering Manager Warning ONLY QUALIFIED
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationHose Reel Enclosure Retrofit Kit
Instructions Hose Reel Enclosure Retrofit Kit 332143A EN Retrofits the Series 500 Hose Reel Enclosure for use with a XD20 Series Hose Reel. For professional use only. Kit No. 24P914 Important Safety Instructions
More informationCENTER-STRUT HEIGHT ADJUSTMENT UNITS MANUAL OPERATION
ASSEMBLY, INSTALLATION &MAINTENANCE INSTRUCTIONS CENTER-STRUT HEIGHT ADJUSTMENT UNITS MANUAL OPERATION No. 00900-211 and 00900-506 Nylon spacer (2) located between fan backboard support and backboard FAN
More informationGAMBLER SCOTT 2011 BIKE OWNERS MANUAL
SCOTT 2011 BIKE OWNERS MANUAL D SCOTT SPORTS SA 17 RTE DU CROCHET 1762 GIVISIEZ SWITZERLAND 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED SCOTT-SPORTS.COM CONTENT Gambler Concept P. 004 Geometry/Technical
More informationSport Grouse PRO REMOTE CONTROL LAUNCHER INSTRUCTION MANUAL
Visit our website for all your launcher dummies and launcher accessories for your Sport Grouse PRO Remote Launcher Sport Grouse PRO REMOTE CONTROL LAUNCHER INSTRUCTION MANUAL SAFETY FIRST This device fires
More informationOPERATING & MAINTENANCE INSTRUCTIONS
1/4 AIR DIE GRINDER (C/W 5 EXTN) MODEL NO: CAT130 PART NO: 3120144 OPERATING & MAINTENANCE INSTRUCTIONS GC0414 INTRODUCTION Thank you for purchasing this CLARKE Die Grinder which is ideal for light tasks
More information1/2 REVERSIBLE RATCHET. 1/2 REVERSIBLE RATCHET MODEL NO: CAT 22b + CAT 91 PART No: & OPERATION & MAINTENANCE INSTRUCTIONS
1/2 REVERSIBLE RATCHET 1/2 REVERSIBLE RATCHET MODEL NO: CAT 22b + CAT 91 PART No: 3110411 & 3110847 OPERATION & MAINTENANCE INSTRUCTIONS 0104 Fig.1 HAND-ARM VIBRATION Refer to notes on page 7 MODEL No:
More informationAIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC05/14
AIR RATCHET WRENCH MODEL NO: CAT21B & CAT90 PART NO: 3110400 & 3110846 OPERATING & MAINTENANCE INSTRUCTIONS GC05/14 INTRODUCTION Thank you for purchasing this CLARKE Air-Powered Ratchet Wrench. Before
More informationFreedom8 ShoeBox Compressor Manual
Freedom8 ShoeBox Compressor Manual Warning!! This product is not a toy! Use or misuse can cause severe injury or death! Use only with adult supervision. This unit is only to be used with tanks, hoses and
More informationMODEL NUMBER: AS18-2 USER GUIDE
Compressor MODEL NUMBER: AS18-2 USER GUIDE WEBSITE: EMAIL: www.airbrushheaven.co.uk enquiries@airbrushheaven.co.uk 1 YEAR WARRANTY Contents 1. Welcome Section 2. General Information & Safety Instructions
More informationSoccer Goal. Model: SG20 Series. Installation, Operation and Maintenance Instructions
Soccer Goal Model: SG20 Series Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE
More informationFisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves
Instruction Manual D103319X012 Lever-Lock Handlever Actuator Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Contents Introduction................................. 1 Scope of Manual.........................
More informationINSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures
INSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures MINT-0289-XX TABLE OF CONTENTS Limited Warranty... 3 User Responsibility... 3-4 General Service... 4 Safety Precautions.... 5 Physical Dimensions..
More informationThe World s Best Adductors
Pelvic Support USER MANUAL The World s Best Adductors Stealth s User Manual and Maintenance Guide for The World s Best Adductors Customer Satisfaction 1.0 Stealth Products strives for 100% customer satisfaction.
More informationOPERATING MANUAL CHEMTRAC 840M MANUAL RETRACTABLE PROCESS HOLDER
OPERATING MANUAL CHEMTRAC 840M MANUAL RETRACTABLE PROCESS HOLDER Table of contents 1 Security and safety measures... 5 1.1 General safety instructions... 5 1.2 Intended use... 5 1.3 Danger zones and residual
More information120 PSI FAST-FILL AIR SOURCE KIT 25% Duty Compressor on 1.5 Gallon Air Tank
120 PSI FAST-FILL AIR SOURCE KIT 25% Duty Compressor on 1.5 Gallon Air Tank PART NO. 20003 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of
More informationTAMPERS WARNING NOTICE. Reliable s REL-TMP Series makes quick work of setting poles, asphalt patch and general construction backfill compacting.
OPERATORS GUIDE REL-TMP HYDRAULIC TAMPERS Reliable s REL-TMP Series makes quick work of setting poles, asphalt patch and general construction backfill compacting. All information found in this guide must
More information3/8 ANGLED AIR DRILL
3/8 ANGLED AIR DRILL MODEL NO: CAT61 PART NO: 3110461 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angled Air Drill. Before attempting to use this product,
More informationBVA BUTTERFLY VALVES
INSTRUCTIONS BVA BUTTERFLY VALVES WARNING These instructions are intended for use only by experienced, qualified combustion start-up personnel. Adjustment of this equipment and its components by unqualified
More informationbook : t95575.fm Seite 1 Mittwoch, September 20, :10 AM. Avensys. Exposed Single Lever Mixer
955751.book : t95575.fm Seite 1 Mittwoch, September 20, 2000 10:10 AM Avensys Exposed Single Lever Mixer 33 389 33 396 Installation Instructions and Operating Guide Please leave this document with the
More information450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES
450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES PART NO. 45053 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing
More informationAutoChanger Installation & User Guide Issue 2
1 INDEX Page 1. Introduction... 3 2. AutoChanger Components Guide 4 3. Installation. 5-11 a) Installation Guidelines.. 5 b) Installation Retrofit... 6-11 c) Installation New... 11 4. AutoChanger User Guide
More information450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES
EXTREME SERIES PART NO. 45043 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS
More information1/2 REVERSIBLE AIR DRILL
1/2 REVERSIBLE AIR DRILL MODEL NO: CAT60 PART NO: 3110460 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill. Before attempting to use this
More informationNeotecha SAPRO - Tank Valve Type ST for aseptic sampling with bottles Installation, Operation and Maintenance Instruction
7 Before installation these instructions must be fully read and understood 1.4 Illegal technical changes It is illegal to do mechanical changes of the design of the Sapro tank valve, or to use parts of
More informationCRYOGENIC TANK SERVICES - CHART RECORDER MANUAL
CRYOGENIC TANK SERVICES - CHART RECORDER MANUAL Pressure Chart Recorder / Temperature Chart Recorder / Dual Recorder Portable Mechanical Chart Recorder for the accurate measurement and recording of Pressure
More informationCONTENTS. Safety & general information. Filling your air rifle with compressed air. Loading your rifle. Pellet recommendations. Fitting a rifle scope
TSAROFFICIAL Edition 14 HANDBOOK CONTENTS Never point your airgun at anyone or anything other than a legitimate target. Safety & general information 2 Filling your air rifle with compressed air 3 Always
More informationANGLE DIE GRINDER SET
ANGLE DIE GRINDER SET MODEL NO: CAT65 PART NO: 3110725 OPERATING & MAINTENANCE INSTRUCTIONS GC0614 INTRODUCTION Thank you for purchasing this CLARKE Angle Die Grinder Set. Before attempting to use this
More informationDIAPHRAGM PUMP MODEL PDM 1-175
INSTRUCTION MANUAL DIAPHRAGM PUMP MODEL PDM 1-175 Manual : 0704 573.034.112 Date : 18/04/07 - Supersede : 17/06/02 - Modif. : + ATEX KREMLIN REXSON - 150, avenue de Stalingrad - 93245 STAINS Cedex - FRANCE
More informationINSTALLATION INSTRUCTIONS
KIT CONTENTS: INSTALLATION INSTRUCTIONS PART NUMBER: DESCRIPTION: E361SXA302 roof MOUNT BICycle CARRIER SINGLE Short Carriage Bolt 1x Long Carriage Bolt 3x Over-Molded Wrench 1x Button Head Screw 2x Washer
More informationHYDRAULIC MOBILE LIFTING TABLE
HYDRAULIC MOBILE LIFTING TABLE MODEL NO: HTL300 & HTL500 PART NO: 7610148 & 76210152 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1116 INTRODUCTION Thank you for purchasing this CLARKE
More informationModel : LMW-9620 Please read this manual carefully before using the instrument Labnics Equipment
MICROPLATE WASHER User Manual Model : LMW-9620 Please read this manual carefully before using the instrument Labnics Equipment Table of Content Sr.No. Contents Pg. No. 1 INTRODUCTION 1 1.1 Working Conditions
More informationOPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions
OPERATOR S MANUAL SPREADER CSS, VNQ [For Combine Harvester AW82V] en Original instructions Introduction Introduction Please read this operator s manual before using your spreader. We would first like to
More informationOPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference.
English Lubrication Free Air Turbine Handpiece with Water Spray OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. OM-T0286E 001 Thank you for purchasing
More informationSILENTAIRE TECHNOLOGY
SILENTAIRE TECHNOLOGY General User and Maintenance Instructions Thank you and congratulations on the purchase of your PANTHER, the leader in the industry of portable air compressors. The PANTHER is built
More informationscott 2012 bike owners manual SCOTT SPORTS SA 17 RTE DU CROCHET 1762 GIVISIEZ SWITZERLAND 2011 SCOTT SPORTS SA, ALL RIGHTS RESERVED SCOTT-SPORTS.
scott 2012 bike owners manual D SCOTT SPORTS SA 17 RTE DU CROCHET 1762 GIVISIEZ SWITZERLAND 2011 SCOTT SPORTS SA, ALL RIGHTS RESERVED SCOTT-SPORTS.COM content Gambler Concept...P. 004 Geometry/Technical
More informationSCOTT SPORTS SA _17 RTE DU CROCHET_1762 GIVISIEZ_SWITZERLAND _ 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED_SCOTT-SPORTS.
SCOTT SPORTS SA _17 RTE DU CROCHET_1762 GIVISIEZ_SWITZERLAND _ 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED_SCOTT-SPORTS.COM V GAMBLER CONTENT The Gambler should be adjusted exactly to the current rider for
More informationSiphon vessel / Priming aid
Manufacturer: sera GmbH sera-straße 1 34376 Immenhausen Germany Tel.: +49 5673 999-00 Fax: +49 5673 999-01 info@sera-web.com Keep the operating manual for future use! Record the exact type and serial number
More informationOPERATING & MAINTENANCE INSTRUCTIONS
3/8 BUTTERFLY IMPACT WRENCH MODEL NO: CAT64 PART NO: 3110720 OPERATING & MAINTENANCE INSTRUCTIONS GC0414 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. The CAT64 is a compact and lightweight
More information