G R AV I T Y B I K E S TA N D OWNER S MANUAL

Transcription

1 G R AV I T Y B I K E S TA N D OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 21991

2 Thank you very much for choosing a WEL-BILT product! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this machine not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call INTENDED USE The gravity bike stand can securely holds two bikes in a compact space and adjustable arms for level bike storage. The vinyl-coated bike cradles and base protects bikes and floor. The stand securely holds two bikes weighing up to 100 lbs. total capacity TECHNICAL SPECIFICATIONS Item Description Capacity 100 lbs. Finish Powder-coat Dimensions 26in. W x 19in. D x 79in. H GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this bike stand until they have read this manual and have developed a thorough understanding of how the bike stand works. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS Page 2 of 5

3 IMPORTANT SAFETY CONSIDERATIONS Do not allow children to climb on or play near stand. Do not exceed the maximum weight capacity of 100 lbs Make sure this product is safely and securely mounted and positioned. This gravity bike stand is designed for indoor use only. FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU! GRAVITY BIKE STAND USE AND CARE Do not modify the gravity bike stand in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the gravity bike stand was designed. Always check of damaged or worn out parts before using the gravity bike stand. Broken parts will affect the gravity bike stand operation. Replace or repair damaged or worn parts immediately. Store idle gravity bike stand. When gravity bike stand is not in use, store it in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before use. ASSEMBLY 1. Set curved base on the floor (#1). Attach angled section#2) to curved base#1 as shown. Attach middle section#3 to angled section#2), making sure arm adjustment holes are on each side. Attach top section#4 to middle section#3 with arm adjustment holes on each side. 2. Slip the support arm#5 brackets into the side holes and push down to lock into place. Note: before doing this, be sure to determine desired height of bikes and put arm brackets in appropriate holes. Be sure that rack is placed firmly against a wall before placing bikes in arm rests. 3. For extra security you may wish to screw the rack into a wall stud. Use optional hole at top of rack for this purpose. MAINTENANCE Maintain your gravity bike stand. It is recommended that the general condition of any gravity bike stand be examined before it is used. Keep your gravity bike stand in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. Page 3 of 5

4 DIAGRAM & PARTS LIST Part# Description Qty. 1 Base 1 2 Angled Section 1 3 Middle Section 1 4 Top Section 1 5 Support Arm 4 6 Square End Cap 1 7 Round End Cap 2 8 Screw 1 9 Plastic Plug 1 For replacement parts and technical questions, please call Page 4 of 5

5 WARRANTY 1-year limited warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, Minnesota NorthernTool.com Made in China Page 5 of 5