Table of Contents. Ecodrum Training Guide (Revised 9/16)
|
|
- Naomi King
- 6 years ago
- Views:
Transcription
1 Training Guide
2 Table of Contents Safety First...Page 2 Ecodrum : How It Works...Page 3 Ecodrum : Controls and Equipment...Page 4 Programming: Clocks...Page 5 Programming: Rotation...Page 6 Programming: Air System...Page 7 Ecodrum : Loading...Page 8 Ecodrum : Discharge...Page 9 Recipe Guide...Page 10 Rotation Guide...Page 11 Air Guide...Page 12 Ecodrum : Maintenence...Page 13 Troubleshooting...Page
3 Safety First Please read and understand the Operation and Maintenance Guide prior to operating the Ecodrum. Do not stand on top of drum. Understand all Safety Instructions and Warnings on the Ecodrum, located on the frame, ladders, motors, fan housing, and other locations. Management of on farm animal mortality composting should be done with the same precaution as any other farm operation. Therefore, when using an Ecodrum in vessel composting system, the operator should: Wear appropriate PPE, such as shield, gloves, respirator, etc. Minimize direct contact with carcasses. Ensure ladder stability when opening/closing doors and loading carcasses, as doors may be heavy. Note: Gases such as ammonia and carbon dioxide are produced during composting action, and may be present inside the Ecodrum. People affected by asthma, allergies, respiratory diseases or other serious health problems should use caution when manipulating compost. 2
4 Ecodrum : How it Works The Ecodrum In Vessel Composter is a managed mechanical system, which enhances the biological process and transforms organic matter into a homogeneous product that is used as a soil amendment. For composting to occur, the following must be in the Ecodrum : Carbon (C): Nitrogen (N): Oxygen (O): Moisture: In the form of bulking material. (ex. wood chips) In the form of your mortality. Is drawn into the composter by the air exhaust system. Already present in your mortality; it should not be necessary to add additional water. Aerobic bacteria uses the oxygen from the air exhaust system to metabolize and grow. This process generates enough heat (131 F or greater) to kill pathogens in the compost. The flap is adjustable for more or less air, and should be modified for less air flow in -10 F weather. 3
5 Ecodrum : Controls and Equipment The Green Light indicates the Ecodum Control Box is ready to operate on either AUTO or MANUAL setting. FAN AUTO / MANUAL sets the fan to operate automatically when the composter is turning (AUTO), or is turned off (OFF). OFF / AUTO / MANUAL switches the drum's rotation to either the programed schedule (AUTO), or manualy rotates the unit. (MAN.) The Temperature Probe is located on the side of the Ecodrum and is used to measure the temperature of the compost inside. The temperature inside the drum should be kept at 131 F or higher. The position of the Temperature Probe varies on different models, but it is always found in one of the crevices on the lower area of the drum. 4
6 Programming: Clocks To set the date and time on the dual Omron clocks, remove the control box cover and perform the following steps: STEP 1: STEP 2: STEP 3: STEP 4: Press and hold the MODE key for 1 second to enter Time Adjustment Mode. The clock symbol on the Omron will flash. Select the current day using the d key to move the arrow. Change the time to the current time using the h key to change the hour and m/pwd key to change the minutes. Press the WRITE key. The colon will flash and the clock will start. (from 0s) Press the MODE key 3 times to return to the run mode. The time has now been changed. Repeat this process on both Omron clocks. It is VITAL that the date & time is correctly programmed to ensure proper rotation and fan scheduling. 5
7 Programming: Rotation The Omron clock on the LEFT-HAND SIDE controls the sceduled rotations. To change the schedule, please follow these instructions: STEP 1: STEP 2: Press and hold the MODE key successively until the P symbol flashes. The symbol is located in the bottom right hand corner of the display. Set the on time using the h key to adjust the hour and m/pwd key to adjust the minutes. STEP 3: Press the WRITE key. STEP 4: Now set the off time using the h key to adjust the hour and m/pwd key to adjust the minutes. Press the WRITE key. STEP 5: Press the MODE key 2 times to return to the run mode. The rotation time is now set. 6
8 Programming: Air System The Omron clock on the RIGHT-HAND SIDE controls the fan scedule. The air system is pre set for 24 pulses of 10 minutes, starting 45 minutes into every hour. To change the pulse time or schedule, please follow these instructions: STEP 1: STEP 2: Press and hold the MODE key successively until the P symbol flashes. The symbol is located in the bottom right hand corner of the display. Set the on time using the h key to adjust the hour and m/pwd key to adjust the minutes. STEP 3: Press the WRITE key. STEP 4: Press the MODE key 2 times to return to the run mode. The rotation time is now set. When temp. falls below 10 F, consider reducing pulse length. 7
9 Ecodrum Loading Ensure the door ledge and gasket are clear of debris before opening or closing the door. Ensure the Ecodrum Control Box is switched to the OFF position before opening the loading door. STEP 1: STEP 2: STEP 3: Using the recipe provided, (Pg.x) calculate the ratio of bulking material needed for the amount of mortality to be loaded. Load bulking material into the Ecodrum, then load mortality. Rotate the Ecodrum if more loading space is required; however, do not overload the drum. The second loading door is to be used only for re bulking to correct the ratio. Please Note: There should be no build up of compost material on the interior surface of the compost drum. Build up of material on the inside surface of the compost drum indicates excessive moisture. More bulking material should be added to dry down the compost material. 8
10 Ecodrum Discharge Operating temperature should be at 131 F or higher. Temps below 110 F will slow composting activity, decrease capacity of the Ecodrum and reduce the quality of exiting compost. Secondary storage bins are used to cure the compost after it has exited the system. Check with your Ecodrum representative or NRCS agent to determine if bulking material and exiting compost must be stored in a secondary bin. Probe the compost pile daily for temperature, turn piles occasionally, and continue to monitor until the pile no longer heats. Once your pile no longer heats up, you can land apply the compost. Please work with your local NRCS office regarding the times of year when land application is allowed. From time to time, the discharged compost may contain clumps of material. This is primarily caused by overloading. Recycle this material back through the Ecodrum system for further composting. After achieving temperatures above 131 F (and have no undesirable materials) please send a sample for pathogen analysis. More details can be provided by your Ecodrum Representative. 9
11 Recipe Guide The key to achieving effective results with your Ecodrum in-vessel composter is consistency. There are two main ratios that must be monitored: Carbon to Nitrogen ratio should be between 20 : 1 and 40 : 1. Moisture should be below 60% by weight. It is the bulking material that reduces the amount of water and the average moisture level in your compost. Bulking Material: Use dried pine shavings, peanut hulls, or other carbon source as directed by your Ecodrum representative. Poultry litter varies, and can have up to 50% moisture, so it should never be the bulk of your carbon source, but added in addition if space in the composter is not an issue. Always load bulking material in first, followed by the mortality. Poultry Carcass Ratios: Bird Mortality (In Pounds) Up to 5lbs Ratio of birds to bulking (by volume) 1 : 1.5 Over 5lbs 1 : 2 Swine Carcass Ratios: Swine Mortality (In Pounds) Bulking (in bags of shavings) Up to 125lbs 125 to 250lbs 1 Bag 2 Bags Over 250lbs 3 Bags Note: 1 Bag = 5.5 Cubic Feet, TSC Store Branded Pine Wood Chips 10
12 Rotation Guide As the volume of mortality increases during the grow-out cycle, the number of rotations should INCREASE. The following is the range of daily rotations for each model: Model Rotations Per Day Model to 4 times per day Model to 6 times per day Model to 8 times per day Model to 10 times per day Some Ecodrum models include a re-bulking door in addition to the loading door. Mortalities should not be added into this door. Note: Due to the variables in every composting situation, the purchaser alone is responsible for operation of the Ecodrum according to US Composting Council standards. 11
13 Air Guide Depending on the model of composter and the weight of the animals being processed, the period in which the fans are active will vary in length. The following is the range of hourly air pulses for each model: Model Length of Air Pulse Model Minutes Model Minutes Model Minutes Model Minutes Model 260: A Model 260 is set for 2 to 3 minutes depending on the loading rate. Broiler operations are usually 2 minutes if birds are 7lbs. or less, while over 7lbs. is set to 3 minutes. Breeder and Swine sites are both set for 2 minutes. Model 360: A Model 360 is set for 4 to 6 minutes depending on the loading rate. Broiler operations are usually minutes if birds are 7lbs. or less, while over 7lbs. is set to 6 minutes. Breeder and Swine sites are both set for 5 minutes. Model 460 & 560: Both the Model 460 and 560 units are set to the standard air pulse length of 10 minutes. 12
14 Ecodrum Maintenance Check the glass on the gearbox quarterly to ensure that the oil level is above the red dot. Change the oil after the first 100 hours. Change oil annually after that. (Factory fill on 120 gearbox is 4.5L of ISO 320, 135 gearbox is 5.5L ISO 320) Remove the chain guard and oil the chain and sprockets every four months. Remove the flexible hose to clean debris and check the air system for blockages weekly. 1½ bearings should be greased monthly. Vulcanized rollers should be checked monthly for unusual wear on the surface. Each guide wheel is complete with a grease nipple. The nipples are greased prior to delivery, and should be regreased quarterly. 13
15 Troubleshooting Problem: The temperature is too low. Potential Cause: The moisture level is too high inside the Ecodrum Add bulking material to either the loading or re bulking door. To prevent re occurance, increase the ratio of bulking material to mortality. Potential Cause: Low oxygen level in the compost Check air exhaust system for any obstructions. Problem: There are maggots and flies around the composter. Potential Cause: The moisture level is too high inside the Ecodrum Add bulking material to either the loading or re bulking door. To prevent re occurance, increase the ratio of bulking material to mortality. Potential Cause: There is debris around the drum Keep surrounding area clean from debris. Problem: The finished compost contains lumps of material. Potential Cause: The moisture level is too high inside the Ecodrum Add bulking material to either the loading or re bulking door. To prevent re occurance, increase the ratio of bulking material to mortality. Potential Cause: Overloading of the composter Recycle the material back through the drum. 14
16 Troubleshooting Problem: Composter is emitting an ammonia smell. Potential Cause: High nitrogen levels Add bulking material to either the loading or re bulking door. To prevent re occurance, increase the ratio of bulking material to mortality. Problem: The finished compost contains lumps of material. Potential Cause: The moisture level is too high inside the Ecodrum Add bulking material to either the loading or re bulking door. To prevent re occurance, increase the ratio of bulking material to mortality. Problem: The composter has blown a fuse. Potential Cause: Power fluctuation or improperly powered composter Open the control box, identify the fuse housings, open and replace the fuse. If issue repeats, unplug composter and check the line running to the composter for damage. 15
170-SJ Feed UnitTM 470-SJ Feed UnitTM
SPONGE-JET 170-SJ Feed UnitTM 470-SJ Feed UnitTM USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com Sponge-Jet 170-SJ / 470-SJ User Manual - REV
More informationIn Vessel Composter Installation & Commissioning Manual
In Vessel Composter Installation & Commissioning Manual Contents Customer responsibilities Transportation Lifting Delivery Pre-installation requirements Installation Drainage Ventilation Levelling Unpacking
More informationFABRICATED ROTARY AIRLOCK
FABRICATED ROTARY AIRLOCK INSTRUCTION, OPERATIONS & MAINTENANCE MANUAL CLEAN AIR MANAGEMENT COMPANY, INC. 8224 Nieman Road i Lenexa, Kansas 66214 Phone: 913-831-0740 Fax: 913-831-9271 TABLE OF CONTENTS
More informationPortable Oil Lube Air Compressors
Portable Oil Lube Air Compressors 8003631 8003632 0410149 8018968 8018940 Owner s Manual Read and understand operating instructions before use Safety definitions The information listed below should be
More informationRASP RX3 Feed UnitTM SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH
SPONGE-JET RASP RX3 Feed UnitTM USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com Sponge-Jet RASP RX3 User Manual - REV A / DOC: MKT-014-ENG SPONGE-JET
More information170-CG Feed Unit SPONGE-JET USER MANUAL. Sponge-Jet, Inc. (USA) 14 Patterson Lane Newington, NH
SPONGE-JET 170-CG Feed Unit USER MANUAL Sponge-Jet, Inc. (USA) 14 Patterson Lane +1-603-610-7950 Newington, NH 03801 www.spongejet.com AUGUST 2014, Sponge-Jet 170-CG User Manual - REV A / DOC: M-MKTG-002ENG
More informationInstallation, Operation, & Maintenance Manual
Installation, Operation, & Maintenance Manual CAMCORP Fabricated Airlocks Square & Round Sizes 8 to 30 Unique Design & Engineering Approaches for Industrial Applications Safety Recommendations... 1-1 Receiving
More informationAC1810 / AC1810-A TECHNICAL SPECIFICATIONS. Operating Pressure psi ( kgs/cm²) [AC1810] Displacement. Net Weight
Technical Specifications Operating Instructions Maintenance Information Troubleshooting Guide Parts Diagrams AC1810 / AC1810-A THE EVOLUTION OF PERFECTION CAUTION: Before attempting to use or service this
More informationAIR COMPRESSOR OPERATING INSTRUCTION AND PARTS LIST
AIR COMPRESSOR OPERATING INSTRUCTION AND PARTS LIST OIL-LESS TYPE IMPORTANT: PLEASE READ CAREFULLY BEFORE STARTING OPERATIONS. THE CONTENTS ARE FOR GENERAL INFORMATION OF ALL THE SIMILAR MODELS. Record
More informationTECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1
Dry 131h 1. DESCRIPTION The Viking Model G-1 Maintenance Air Compressor is an electric motor-driven, aircooled, single-stage, oil-less compressor. The unit is equipped with a check valve and provides a
More informationApex Evaporator Manual
Apex Evaporator Manual Table of Contents I. Handling/Transportation of Apex II. Placing the evaporator III. Connecting Power to the control Panel IV. Placing the control panel and weather station V. Attaching
More informationINSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT
INSTALLATION, OPERATION AND SERVICE MANUAL ABS AIR BAG LIFT P.O. Box 1058 1058 West Industrial Avenue Guthrie, OK 73044-1058 405-282-5200 FAX: 405-282-8105 www.autoquip.com Item # 830ABS Version 1.0 07/2001
More informationRH800 & 2000 BASIC OPERATIONS
RH800 & 2000 BASIC OPERATIONS 2 General information This manual contains technical information regarding Bayer SeedGrowth Equipment. Please read and understand these instructions completely before proceeding
More informationPERFORM Operating Document
PERFORM Operating Document Use and Maintenance of CO 2 Incubator PC-POD-CA-007-v03 Revision History Version Reason for Revision Date 01 New POD 30-Sep-13 02 Minor revisions for section 2.3, 3.1, 4.3. 14-April-16
More informationRARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
More informationVERTICAL AIR COMPRESSORS
VERTICAL AIR COMPRESSORS MODEL NO: VE15C150, VE18C150, VE25C150 PART NO: 2226010, 2226020, 2226025 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Vertical
More informationVERTICAL AIR COMPRESSORS
VERTICAL AIR COMPRESSORS MODEL NO: VE11C150, VE15C150, VE18C150 PART NO: 2226005, 2226000, 2226015 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE Vertical
More informationA17W23_MASE_MUS_EN MANUAL
A1W2_MASE_MUS_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
More informationEffective Management Practices to Reduce the Incidence of Ascites in Broilers
Effective Management Practices to Reduce the Incidence of Ascites in Broilers December 2009 Summary Introduction Ascites is a multi-factorial syndrome caused by interactions between physiological, environmental
More informationUser s Information Manual
48HC with EnergyX R System Factory Installed Energy Recovery Single---Package Rooftop Unit (RTU) Gas Heating/Electric Cooling Units 15 to 25 Nominal Tons with Puronr (R---410A) Refrigerant User s Information
More informationPERFORM Operating Document
PERFORM Operating Document Use and Maintenance of CO 2 Incubator PC-POD-CA-007-v02 Revision History Version Reason for Revision Date 01 New POD 30-Sep-13 02 Minor revisions for section 2.3, 3.1, 4.3. 14-April-16
More informationUNIVERSITY OF ROCHESTER MEDICAL CENTER
1. Purpose/Scope: This procedure defines the operation, maintenance and calibration of the Beckman 2. General Policy: The HIC will adhere to the specific guidelines recommended by Beckman Coulter s instruction
More informationBest Practice on the Farm
Best Practice on the Farm Fly Control Best Practice on the Farm Fly Control Introduction Flies pose a health risk for humans and poultry. They are carriers of Salmonella, Pasteurella, Campylobacter and
More informationSafety Section. DANGER: Never enter bin unless all power is locked out and another person is present. Rotating augers can kill or dismember!
Safety Section Read manual before installing or using product. Failure to follow instructions and safety precautions in manual can result in death or serious injury. Keep manual in a safe location for
More informationMisaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii
Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6
More informationINSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL
WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...
More informationHYDRAULIC WINCH FOR AUGERS UP TO WR10 X 71 / W130 X 41 ASSEMBLY & OPERATION MANUAL
HYDRAULIC WINCH ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual
More informationMODEL NUMBER: P PORTABLE COMPRESSOR
MODEL NUMBER: 44043-440P PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator of the product read and understand the contents of this manual before installing and using this product.
More informationCOMPRESSOR MANUAL. (888)
COMPRESSOR MANUAL www.ultimadentalsystems.com (888) 900-8584 Table of Contents Introduction..Page 2 Quick Compressor Start Guide....Page 3-5 Compressor Pump Diagram....Page 6 Compressor Frame Diagram....Page
More informationInstruction Manual VCG-6
Specifications Amps / Volts requirements 400 ma @ 24 VDC Propane pressure (VCG-6LP) 11 WC / 2.8 kpa Natural Gas pressure (VCG-6NG) 4.5 WC / 1.15 kpa Cu ft per hour / CO2 3-6 SCFH BTU Rating (Variable)
More informationDENTAL SHOP SAFETY. James Kaznosky Environmental Health and Safety
DENTAL SHOP SAFETY James Kaznosky Environmental Health and Safety TRAINING OBJECTIVES Types of Machines at Dental School lab General Shop Hazards General Shop Safety Rules What to do in Case of Injury
More informationMaintenance and Troubleshooting of Pneumatic Conveying Systems for Sand in a Foundry
Maintenance and Troubleshooting of Pneumatic Conveying Systems for Sand in a Foundry Article Takeaways: Chris Doerschlag President ALB Klein Technology Group www.albkleinco.com 1. Troubleshooting Guide
More informationHandout Activity: HA107
Engines: Motive Power Types: Handout Activity: HA107 Student/Intern information: Name Date Class Identifying hazards Summary A workshop is a hazardous environment. The objective of this procedure is to
More information450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES
450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES PART NO. 45053 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing
More informationMODEL NUMBER: P-A AUTOMATIC PORTABLE COMPRESSOR
MODEL NUMBER: 45043-450P-A AUTOMATIC PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator of the product read and understand the contents of this manual before installing and
More information3 GALLON, OILLESS PANCAKE COMPRESSOR INSTRUCTIONS. Item #31289
3 GALLON, OILLESS PANCAKE COMPRESSOR INSTRUCTIONS Item #31289 The EASTWOOD 3 GALLON, OILLESS PANCAKE COMPRESSOR, with an Integral Air Regulator, efficiently supplies all compressed air requirements for
More informationChlorTainer is the safest, most reliable technology available for processing and preventing a chlorine gas release.
ChlorTainer is the safest, most reliable technology available for processing and preventing a chlorine gas release. Safest Technology Available ChlorTainer will reduce the area affected by 97%, providing
More informationTFS230 FLOOR STRIPPER OPERATION & MAINTENANCE
TFS230 FLOOR STRIPPER OPERATION & MAINTENANCE SAFETY General Information Thank you for your purchase of the Trelawny TFS230 Floor stripper. Before operating the TFS230 this manual must be read and understood
More informationRespiratory Protection in Agriculture
Respiratory Protection in Agriculture Glen H. Hetzel, Extension Agricultural Engineer Virginia Tech Introduction Who Needs Respiratory Protection? THOSE working in dusty fields and buildings THOSE handling
More informationChair Topper. Autoadapt. Hoisting and stowing. User manual
Chair Topper Autoadapt Hoisting and stowing EN User manual 2 Chair Topper Hoisting and stowing Thank you for choosing a Chair Topper from Autoadapt! The following manual is an important part of the product,
More informationRT3 CAP NAILER OWNER S MANUAL Operation Safety Maintenance Warranty! www.stingerworld.com PLEASE READ! This manual contains important information about product safety. REV 09/14 WELCOME TO STINGER Congratulations
More information4WD ACCESSORIES BONUS CARRY BAG 100L AIR COMPRESSOR INSTRUCTION MANUAL
4WD ACCESSORIES BONUS CARRY BAG 100L AIR COMPRESSOR INSTRUCTION MANUAL Contents Page WARRANTY DETAILS... 3 REPAIR AND REFURBISHED GOODS OR PARTS NOTICE... 3 WELCOME... 4 INTENDED USE... 5 CONTENTS... 5
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL GS2000 / GS2001 OIL-LESS REFRIGERANT RECOVERY UNIT NATIONAL REFRIGERATION PRODUCTS 985 WHEELER WAY LANGHORNE, PA 19047 (215) 638-8909 FAX (215) 638-9270 R01099 GS2000.DOC NRP-OM-GS2000
More information814PRO Hydraulic Saw OPERATOR S MANUAL ICS, Blount International Inc. Specifications are subject to change without notice.
814PRO Hydraulic Saw OPERATOR S MANUAL 814PRO OPERATOR S MANUAL TABLE OF CONTENTS SYMBOLS & LABELS 4 SAFETY 5 TECHNICAL SPECIFICATIONS 7 SET-UP 8 OPERATION 10 MAINTENANCE 12 TROUBLESHOOTING 14 REFERENCE
More informationPart IV: Troubleshooting
Part IV: Troubleshooting Excessive Oil Carryover Pump-Up Time Test Excessive oil carryover can have adverse effects on the performance of pneumatic climate control systems. Although some oil entrainment
More informationRespiratory Protection for Producers
March 2005 Agdex 086-8 Respiratory Protection for Producers Dust and harmful gases can cause immediate and long-term respiratory problems. Wearing protective equipment is vitally important when working
More informationOPERATION MANUAL NTF-15
OPERATION MANUAL NTF-15 Nitrogen Tire Filling Valve Stem Caps (Qty=200) Order P/N 436075 RTI Technologies, Inc 10 Innovation Drive York, PA 17402 800-468-2321 www.rtitech.com 035-81235-00 (Rev B) TABLE
More informationUsage Policies Notebook for Trion RIE / ICP Dry Etch
Usage Policies Notebook for Trion RIE / ICP Dry Etch Revision date September 2014 2 Emergency Plan for Trion RIE/ICP Dry Etch Standard Operating Procedures for Emergencies Contact information Person Lab
More informationCLARKES ERO FEEDER MANUAL
CLARKES ERO FEEDER MANUAL It is the sole responsibility of the Owner and/or the Responsible Supervising Operators of this equipment to properly instruct their employees, either direct or contact, in the
More informationLab Assessments Workshop
Lab Assessments Workshop Gary Hicks Brazosport Jeff Laube Kenai Peninsula College Dorothy Ortego - Sasol plus Materials from University of Alaska Brian Ellington Why Assess? Improve knowledge and skill
More informationIII. Identify the initial installation requirements for standpipe systems
Design Basic Design Requirements 1. Must provide 500 GPM at 65 PSI to the highest most remote standpipe riser outlet. 2. 250 GPM for each additional standpipe total not to exceed 2500 GPM III. Identify
More informationOPERATION MANUAL NTF-60 Plus
OPERATION MANUAL NTF-60 Plus Nitrogen Tire Filling Valve Stem Caps (Qty=200) Order P/N 436075 RTI Technologies, Inc 10 Innovation Drive York, PA 17402 800-468-2321 www.rtitech.com 035-81264-00 (Rev A)
More informationPlasma-Therm PECVD. Operating Characteristics. Operating Instructions. Typical Processes. I. Loading. II. Operating
Plasma-Therm PECVD A PECVD (plasma enhanced chemical vapor deposition) reacts gases in a RF (radio frequency) induced plasma to deposit materials such as silicon dioxide and silicon nitride. This PECVD
More informationP6 PRODUCTION CONFINED SPACE LOG
MACHINE NUMBER SPACE HAZARDS SPACE DESCRIPTION #60103-107 DESIGNATION ACCEPTABLE ENTRY PROCEDURES Conveyors with moving parts, pulleys, gears, rollers COKE UNLOADING PIT 1. Conveyors are guarded, if guards
More informationTOCA MAINTENANCE & TROUBLESHOOTING MANUAL
TOCA MAINTENANCE & TROUBLESHOOTING MANUAL Performing regular maintenance on your TOCA Touch Trainer will help prolong the life of the machine and ensure each training session runs smoothly. This manual
More informationGHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1562 Nomex Honeycomb, 1.8 lb. FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE: (937)
More information450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES
EXTREME SERIES PART NO. 45043 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS
More information955108_2. AirForce Operator s Guide
955108_2 AirForce Operator s Guide Contents System Setup and Operation...3 AirForce Setup...3 Load Cells...6 AirForce Control...8 How to Set AirForce...11 Home Screen...13 AirForce Diagnostic Information...15
More informationTechnical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
More informationINTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationSRL Series. Oil-less Scroll Air Compressors. Pharmaceutical. Research & Development. Food & Beverage. Chemical. Electronic
Pharmaceutical SRL Series Oil-less Scroll Air Compressors Research & Development Food & Beverage Chemical Electronic Hitachi Industrial Equipment Product Brochure Hitachi SRL Series scroll compressors
More informationTable of Contents. Sensor Calibration and Troubleshooting CDS4000 CO 2. Introduction 1. Handling Information. Calibration 2.
FANs 216, 1628.3 Technical Bulletin CDS4000 Issue Date 0797 CDS4000 CO 2 Sensor Calibration and Troubleshooting Table of Contents Introduction 1 Handling Information 1 Calibration 2 Preparation 2 Cautions
More informationCranes and Hoists. Elevating Work Platforms ASSESSMENT
Cranes and Hoists Elevating Work Platforms ASSESSMENT Part 1 Part 2 Performance Oral/Written June 1995 Contents Page Assessor guidelines general guidelines for Schedule B i Part one Performance Assessment
More informationUser manual CF8-D/W-IN
User manual CF8-D/W-IN General The sensor CF8-D/W-IN is used to measure the carbon dioxide concentration inside incubators. All functions can be modified from a PC with the communication cable. UMA 48
More informationG10K - 1/2" Heavy-Duty Air Impact Wrench
G10K - 1/2" Heavy-Duty Air Impact Wrench OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationDisposal: Science and Theory
Gassing is a preferred and available option Whole house gassing Partial house gassing Containerized gassing Foam depopulation Foam with inert gas Foam without inert gas Individual depopulation Current
More informationEGL-12 OIL-LESS COMPRESSOR
Operator s Manual 2016 EGL-12 OIL-LESS COMPRESSOR EGL-12 / 2HP OIL-LESS COMPRESSOR INSTALLATION QUESTIONS? 1-800-240-5677 SIERRA DENTAL PRODUCTS, LLC. 1953 W. Gulf to Lake Hwy. Lecanto, FL 34461 www.dentalvacuums.com
More informationHEAT EXCHANGE AND TRANSFER, INC. 500 Superior Street Carnegie, PA (412) Fax: (412)
SECTION Bypass Oil Sampling Station (B.O.S.S 1000) GENERAL.......................... SAFETY........................... Hazards............................... Personal Protective Equipment........... PRODUCT
More informationOPERATION and MAINTENANCE Guide
Catalog No. AIR1000 Winch and Hoist OPERATION and MAINTENANCE Guide Cat. No. AIR1000 1250 Lb. Single Line Pull READ THIS BEFORE OPERATING UNIT INSTALLATION: Mount on clean, flat surface. Use 1/2" mounting
More informationA18W35_MASE 130_F_EN MANUAL
A18W_MASE 10_F_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
More informationAir Tractor Preventative Maintenance Manual And Troubleshooting
1.0 Overview This maintenance schedule will assist in the maintenance and troubleshooting procedures for the Unified Industries Air Tractor. The first portion of this section details the general maintenance
More informationicreasepro Creaser Operators Manual
6-2013 Version 3.0 icreasepro Creaser Operators Manual WWW.MBMCORP.COM 800-223-2508 TABLE OF CONTENTS SPECIFICATIONS.1a SAFETY PROCEDURES/CARE & MAINTENANCE..1b COMPONENT IDENTIFICATION 2 TOUCH SCREEN
More information444C DUAL PERFORMANCE VALUE PACK
(Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL
More informationLumbar Pack Safety System: Webbing
Lumbar Pack Safety System: Webbing Black Sunday New York City: January 23, 2005 o Bronx Box 3-3 2997: (6) Firefighters forced to bail out of a 4 th story window; (3) firefighters killed, (3) firefighters
More informationCommercial Softeners. Installation, Operation & Maintenance Guide. Manual 002.1
Commercial Softeners Installation, Operation & Maintenance Guide Manual 002.1 Contents Page 1. Unpacking Instructions 3 2. Installation 3 Pre-installation checks Fitting the bottom distribution system
More informationLiquid Gas Cylinder (LGC)
Liquid Gas Cylinder (LGC) www.soxal.com SOXAL Liquid Gas Cylinder (LGC) A Liquid Gas Cylinder (LGC) is a portable super-insulated vacuum vessel holding liquid nitrogen, oxygen, argon and carbon dioxide.
More informationTechnical Data. M23660 Gas Tap Lubricant. Molybdenum disulphide assembly/sealing lubricant for gas appliances. Product Overview
Technical Data M23660 Gas Tap Lubricant Molybdenum disulphide assembly/sealing lubricant for gas appliances Product Overview Directions for Storage and Use ROCOL M23660 Gas Tap Lubricant is designed for
More informationInstallation and operating manual. Pneumatic control station LK product no: PCS 1-10
LK product no: PCS 1-10 Article no: 74503 Revision:8 Article no: 74503 Revision: 8 2 (23) Contents 1. General information... 5 2. Safety precautions... 5 2.1 Significance of symbols... 5 2.2 Explanatory
More informationAC558RB AC7011RB. operation manual
AC558RB AC7011RB operation manual table of contents Introduction 4 Using the Operators Manual Specifications 4 Specifications Product Identification 5 Record Identification Numbers Safety 6 Safety Instructions
More informationAUTOMATIC TIRE INFLATOR # MW-60, MW-60-4WAY & MW-64HP
USER MANUEL AUTOMATIC TIRE INFLATOR # MW-60, MW-60-4WAY & MW-64HP TIRE EQUIPMENT MANUFACTURER 1.866.409.RACK WWW.MARTINSINDUSTRIES.COM info@martinsindustries.com PARTS Verify that the following components
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More informationVacutrans Instructions
Vacutrans Instructions EMPIRE ABRASIVE EQUIPMENT COMPANY 2101West Cabot Blvd. Langhorne, Pa 19047 215-752-8800, FAX 215-752-9373 Web Site: www.empire-airblast.com ASSEMBLY DETAIL Your Vacutrans unit has
More information1. PARTS INTRODUCTION ELECTRICAL NOTES INSTALLATION 5/6. 5. START UP 6/7. 6. MAINTENANCE 7/8/9. 7. PRESSURE SWITCH ADJUSTMENTS 9/10.
CONTENTS 1. PARTS 3. 2. INTRODUCTION 4. 3. ELECTRICAL NOTES 5. 4. INSTALLATION 5/6. 5. START UP 6/7. 6. MAINTENANCE 7/8/9. 7. PRESSURE SWITCH ADJUSTMENTS 9/10. 8. ELECTRICAL CONNECTIONS 10/11. 9. SPECIFICATIONS
More informationDate Printed: 03/22/2007 Date Updated: 09/07/2006 Version 1.8
SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 03/22/2007 Date Updated: 09/07/2006 Version 1.8 Section 1 - Product and Company Information Product Name Product Number Brand HEPES SODIUM H7006 SIGMA
More informationMedical Instruments in the Developing World
2.2 Ventilators 2.2.1 Clinical Use and Principles of Operation Many patients in an intensive care and the operating room require the mechanical ventilation of their lungs. All thoracic surgery patients,
More information1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Page: 1/6 1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance or mixture: Name: Product code: BN9 Use of the substance/preparation: Food ingredient
More informationDate Printed: 03/18/2009 Date Updated: 02/06/2006 Version 1.3. PENTAAMMINECHLOROCOBALT(III) CHLORIDE, & Product Number
SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 03/18/2009 Date Updated: 02/06/2006 Version 1.3 Section 1 - Product and Company Information Product Name PENTAAMMINECHLOROCOBALT(III) CHLORIDE, &
More information4 ANGLE GRINDER MODEL NO: CAT 52 PART
4 ANGLE GRINDER 4 ANGLE GRINDER MODEL NO: CAT 52 PART No: 3110685 OPERATION & MAINTENANCE INSTRUCTIONS 0807 Fig.1 SPECIFICATIONS Model:...CAG52 Part Number:...3110685 Rated Wheel...Capacity: 4 x 1/4 (type
More informationNitrogen Tyre Inflator Owner s Manual
Nitrogen Tyre Inflator Owner s Manual Model:PN-8890 Please read this manual carefully before attempting assembly or use. 1 Suit for: Motorcycle, Car, Light Truck, Bus Manual Model Nitrogen Tyre Inflation
More informationLaser Gases and Support
Overview Enhancing Laser Equipment Performance Praxair s LaserStar gases are the right choice for your laser system. Our knowledgeable team can help you design a complete laser gas solution Including high
More informationDate Printed: 03/13/2008 Date Updated: 01/29/2006 Version 1.3. Product Name BROMOPENTACARBONYLMANGANESE(I), 98% Product Number
SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 03/13/2008 Date Updated: 01/29/2006 Version 1.3 Section 1 - Product and Company Information Product Name BROMOPENTACARBONYLMANGANESE(I), 98% Product
More informationSAFETY DATA SHEET. Section 1 - CHEMICAL, PRODUCT AND COMPANY IDENTIFICATION. Section 2 - HAZARDS IDENTIFICATION
SAFETY DATA SHEET Section 1 - CHEMICAL, PRODUCT AND COMPANY IDENTIFICATION Supplier Information: American Excelsior Company 850 Avenue H East Arlington, TX 76011 Office Phone #: (817) 385-3500 Chemical
More information1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Page: 1/6 1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance or mixture: Name: Product code: C6 Use of the substance/preparation: Food ingredient
More informationRejuvenation Instructions
Rejuvenation Instructions #401 Air Systems UPR This NRI covers the following: Understanding the applications and operation of flow meters. Understand the application and operation of test pressure gauges.
More informationBelt Conveyors. & Accessories
Belt Conveyors & Accessories WESTFIELD BELT CONVEYORS ARE BUILT TOUGH TO PERFORM, YET DESIGNED AND ENGINEERED FOR GENTLE HANDLING OF DELICATE SEEDS AND COMMODITIES. GENTLE HANDLING Specialty crops, seed
More informationDate Printed: 03/06/2008 Date Updated: 02/06/2006 Version 1.4
SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 03/06/2008 Date Updated: 02/06/2006 Version 1.4 Section 1 - Product and Company Information Product Name HUMIC ACID Product Number 53680 Brand FLUKA
More informationSupporting inquiry based teaching and learning. Respiration. Student Name: Class:
Supporting inquiry based teaching and learning Respiration Student Name: Class: Teacher Name: School: Question 1 a) Respiration is the process that the swimmer uses to release energy from the digested
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More information24L AIR COMPRESSOR MODEL NO: TIGER 8/260 PART NO:
24L AIR COMPRESSOR MODEL NO: TIGER 8/260 PART NO: 1499490 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0918 - ISS 2 INTRODUCTION Before attempting to use this product, please read this
More informationSPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
More information