Combined Pressure / Vacuum Relief Valve KITO VD/o
|
|
- Elvin Roberts
- 6 years ago
- Views:
Transcription
1 KITO VD/o DN D H kg* vacuum setting (mbar) pressure DIN ANSI DIN ANSI min max min max** 50 PN PN PN PN PN PN PN Dimensions in mm * Indicated weights are understood without weight load and refer to the standard design standard valve setting mbar (pressure) -different settings against additional price- (** higher settings require higher housings) performance curves: E 017 N Standard design housing : steel, mat no valve parts / spindle : mat no gasket : NBR, Viton, PTFE valve pallet (vacuum) : spring loaded valve pallet (pressure) : weight loaded weather hood : mat no 14301, mat no 14571, protective screen : PA6 (> DN 100 mat no or 14571) flange connection : DIN EN form B1, ANSI 150 lbs RF end-of-line armature, as breather and venting device, mainly used for tanks in which inflammable liquids are stored Used to prevent inadmissible pressure or vacuum as well as gas losses or inadmissible emissions respectively Valve is not explosion-proof on endurance-burning proof E 17 N 0913
2 KITO VD/o E 17 N The flow capacity V refers to a density of air with ρ = 129 kg/m³ at a temperature of 273 K and a pressure of 1013 mbar The indicated flow rates will be reached by an accumulation of 40% above valve s setting The flow capacity for gases with different densities can be calculated sufficiently accurate by the following approximation equation: V 40% ρ b V b = V40% ρ = V b or b Indicated flow rates will be reached by an accumulation of 40% above valve s setting E
3 KITO VD/o-1 ød H DN DN D H kg vacuum Setting* (mbar) pressure DIN ANSI DIN ANSI min max min max 50 PN PN PN PN PN PN PN Dimensions in mm * minor settings see type sheet E 17 N, higher settings on request performance curves: E 0171 N Standard design housing : steel, mat no valve parts / spindle : stainless steel mat no valve sealing (vacuum) : NBR, Viton, PTFE valve sealing (pressure): metal sealing valve pallet : spring loaded parts spring loading : stainless steel mat no compression springs : stainless steel weather hood : mat no 14301, mat no 14571, protective screen : PA6 (> DN 100 mat no or 14571) flange connection : DIN EN form B1, ANSI 150 lbs RF end-of-line armature, as breather and venting device, mainly used for tanks in which inflammable liquids are stored Used to prevent inadmissible pressure or vacuum as well as gas losses or inadmissible emissions respectively Valve is not explosion-proof on endurance-burning proof E 171 N 0813
4 KITO VD/o DN 25 For valves with bigger nominal sizes see type sheet E 17 Weight 65 kg (indicated weight is understood without weight load and refer to the standard design) standard valve setting 7-30 mbar pressure (maximal 70 mbar) and 3-50 mbar vacuum -different settings against additional price- Design: housing from steel is represented on the left, housing from stainless steel is represented on the right side of the sectional drawing performance curves: E 0172 N Standard Design housing : steel, mat no valve parts / spindle : mat no valve sealing : NBR, Viton, PTFE valve pallet (vacuum) : spring loaded valve pallet (pressure) : weight loaded weather hood : mat no 14301, mat no flange connection : 4 blind holes (M12) DIN EN PN 40 as end-of-line armature, as venting and breather device mainly for tanks in which incombustible liquids are stored Valve is used to prevent inadmissible pressure or vacuum as well as gas losses or inadmissible emissions respectively Valve is not explosion-proof or endurance-burning proof _ E 172 N 0313
5 KITO VD/o DN 25 E 172 N Flow capacity V based on air of a density ρ = 129 kg/m³ at T = 273 K and atmospheric pressure p = 1013 mbar For other gases the flow can be approximately calculated by V ρb 1 29 = Vb 129 or Vb = V ρ Air flow capacity at 40% above valve setting (see DIN 4119) Curves indicated by require special weight loads b 1 0,8 0,6 0,5 0,4 0,3 0,2 0,1 0,08 0,06 0,05 0,04 0,03 0,02 2 DN vacuum setting p (mbar) ,8 0,6 0,5 0,4 0,3 0, pressure setting p (mbar) DN gas flow V (Nm 3 /min) E 0172 N 03-13
6 KITO VD/oP DN D H kg* vacuum pressure 50 PN mbar mbar 80 PN mbar mbar 100 PN mbar mbar 125 PN mbar mbar 150 PN mbar mbar 200 PN mbar mbar 250 PN mbar mbar 300 PN PN 10 Dimensions in mm * Indicated weights are understood without weight load and refer to the standard design Standard valve setting to 30 mbar (pressure) -different settings against additional price- performance curves: E 0174 N Standard design housing : steel, stainless steel mat no (valve face mat no 14571) inner faces of the housing: coated with PTFE valve parts / spindle : stainless steel mat no gasket weather hood : NBR, Viton, PTFE : stainless steel mat no or flange connection : DIN EN (threaded holes for stud bolts at DN 150 u 250) As end-of-line armature on storage tanks and silos in which powder products and granulates are stored Used as venting and breather device to prevent inadmissible pressure or vacuum All moving parts are outside the storage room _ E 174 N 0313
7 KITO VD/oP E 174 N Flow capacity V based on air of a density ρ = 129 kg/m³ at T = 273 K and atmospheric pressure p = 1013 mbar For other gases the flow can be approximately calculated by V ρb 1 29 = Vb 129 or Vb = V ρ Air flow capacity at 40% above valve setting (see DIN 4119) Curves indicated by require special weight loads b ,8 0,6 0,5 0,4 0,3 0,2 0,1 0, vacuum setting p (mbar) DN 350 DN 300 DN 250 DN 200 DN 150 DN 125 DN 100 DN 80 DN ,8 0,6 0,5 0,4 0,3 0,2 0,1 0, pressure setting p (mbar) DN 350 DN 300 DN 250 DN 200 DN 150 DN 125 DN 100 DN 80 DN 50 gas flow V (Nm 3 /min) E 0174 N 0313
8 KITO VD/OL Example to order: DN 150 with overpressure pallet DN 80: KITO VD/OL 150/80 setting (mbar) DN ANSI D H H1 H2 C C1 kg* vacuum pressure min max sizes min max 50 PN DN DN PN DN DN DN PN DN DN DN PN DN DN DN DN PN DN DN DN DN PN DN DN DN DN PN DN DN DN Dimensions in mm * Indicated weights are understood without weight load and refer to the standard design Standard valve setting 7-30 mbar -different settings against additional price- performance curves: Standard design housing : steel, stainless steel mat no valve seats / spindles : stainless steel mat no valve seals : NBR, Viton, PTFE weather hood : stainless steel mat no 14301, protective screen : stainless steel mat no 14301, flange connection : DIN EN form B1, ANSI 150 lbs (lateral or vertical) as end-of-line armature, for venting apertures on tank installations Used mainly as venting and breather device for fixed roof tanks Used to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses or inadmissible emissions respectively The housing is mounted perpendicularly on a tank roof _ E 1710 N 0813
9 KITO VD/OL E 1710 N The flow capacity V refers to a density of air with ρ = 129 kg/m³ at a temperature of 273 K and a pressure of 1013 mbar The indicated flow rates will be reached by an accumulation of 40% above valve s setting The flow capacity for gases with different densities can be calculated sufficiently accurate by the following approximation equation: V 40% ρ b Vb = V40% ρ = V b or Indicated flow rates will be reached by an accumulation of 40% above valve s setting b _ E N 0813
10 KITO VD/OL-1 ød Example to order: DN 150 with overpressure pallet DN 80: KITO VD/OL-1 150/80 H2 H1 H C C1 DN setting (mbar) DN ANSI D H H1 H2 C C1 kg vacuum* pressure** min max sizes min* max 50 PN DN 25 u PN DN 50 u PN DN 50, 80 u PN DN 50, 80 u DN PN DN 50, 80 u DN DN 80, PN DN DN DN PN DN DN 200, Dimensions in mm Indicated weights are understood without weight load and refer to the standard design * Standard valve setting 7-30 mbar -different settings against additional price- ** minor settings see type sheet E 1710 N, higher settings on request performance curves: _ Standard design housing : steel, stainless steel mat no valve pallet (pressure) : spring loaded valve pallet (vacuum) : weight loaded valve seats / spindles : stainless steel mat no valve seals : metal sealing spring loaded parts : stainless steel compression spring : stainless steel weather hood : stainless steel mat no 14301, protective screen : stainless steel mat no 14301, flange connection : DIN EN form B1, ANSI 150 lbs (lateral or vertical) as end-of-line armature, for venting apertures on tank installations Used mainly as venting and breather device for fixed roof tanks Used to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses or inadmissible emissions respectively The housing is mounted perpendicularly on a tank roof E N 0813
11 Combined Relief Valve KITO VD/o2 ød pressure relief pallet I protective gas H inert gas inlet (vacuum relief pallet) II H1 DN DN C DN ANSI D C H H1 kg* setting I (mbar) setting II (mbar) min max min max 50 PN PN PN Dimensions in mm * Indicated weights are understood without weight load and refer to the standard design Standard valve setting 7-30 mbar -different settings against additional price- Standard design housing : steel, mat no 14571, valve seat / valve spindle : mat no gasket : NBR, Viton, PTFE weather hood : mat no 14301, mat no protective screen : mat no 14301, mat no flange connection : DIN EN form A, ANSI 150 lbs RF performance curves: E 018 N as end-of-line armature, preferably for inflammable liquids stored under inert gas, for venting and breathing of fixed roof tanks and above-ground tanks, with lateral connection for the inert gas conduit The upper valve arrangement, which consists of a pressure valve, prevents the development of inadmissible pressure The lower valve serves to automatically control the supply of inert gas (e g nitrogen) and adjusts the necessary inert gas pressure in the tank For the max admission pressure see setting II E 18 N 1111
12 Combined Relief Valve KITO VD/o2 E 18 N Flow capacity V based on air of a density ρ = 129 kg/m³ at T = 273 K and atmospheric pressure p = 1013 mbar For other gases the flow can be approximately calculated by V b = V or ρ b 1 29 V 129 b = V ρ b Air flow capacity at 40% above valve setting (see DIN 4119) If different accumulations are required see page A 31 for correcting factor Curves indicated by require special weight loads E 018 N 1111
T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version
T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version Application Excess pressure valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2
More informationSelf-operated Pressure Regulators Type 2405 Pressure Reducing Valve
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve ANSI version Application Pressure reducing valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2 1) (DN
More informationBlanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
More informationPROTEGO Pressure and Vacuum Relief Valves. Volume 6. in-line. Volume 6. for safety and environment
PROTEGO Pressure and Vacuum Relief Valves inline Volume 6 Volume 6 for safety and environment Pressure and Vacuum Relief Valves inline The working principle and application of pressure and vacuum relief
More informationSafety valves. Component-tested safety valves DN Compressed Air Accessories II Hoses, valves etc. 15. Technical data. Exhaust capacity air
Component-tested s DN 6 Safety valves serve to blow out non-poisonous and non flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only s that have
More informationAnderson Greenwood Type 4142 piped away pressure relief valves
7 Anderson Greenwood Type 4142 piped away pressure relief valves High capacity weight or spring loaded pressure relief valves that pipe away to a closed header system. Designed to work closer to a tank's
More informationSelf-operated Pressure Regulators Type 2405 Pressure Reducing Valve
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve Application Pressure reducing valve for set points from 5 mbar to 10 bar Nominal size DN 15 to 50 Nominal pressure PN 16 to 40 Suitable
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationRR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
More informationL21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
More informationSERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.
SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG
More informationDual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series
Dual Modular Safety Shutoff Valves DMV-D/11 Series DMV-DLE/11 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked
More informationPROTEGO Pressure/Vacuum Relief Valves. Volume 7. with Flame Arrester - end-of-line. Volume 7. for safety and environment
PROTEGO Pressure/Vacuum Relief Valves with Flame Arrester - end-of-line Volume 7 Volume 7 Pressure/Vacuum Relief Valves with Flame Arrester end-of-line The working principle and location of the installation
More informationSV - Safety Shutoff Valve with Proof of Closure 1/2" NPT - 2" NPT. SV/614 Series SV-DLE/614 Series
SV - Safety Shutoff Valve with Proof of Closure 1/2" NPT - 2" NPT SV/614 Series SV-DLE/614 Series Normally closed automatic shutoff valve with proof of closure and the following approvals. CSA Certified
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationModel TB 3-16 TECHNICAL BULLETIN. Secure-Gard Pilot Operated Vent Valve (POVV) BENEFITS TYPICAL APPLICATIONS FEATURES
TECHNICAL BULLETIN 1049 - TB 3-16 Model 1049 Secure-Gard Pilot Operated Vent Valve (POVV) ISO Registered Company The Model 1049 is a pilot operated vent valve specifically designed for low-pressure storage
More information94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?
94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank
More informationWater. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationDual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationGas Appliance Pressure Regulators and. Line Pressure Regulator. FRS 7../6 Series FRS 5... Series
Gas Appliance Pressure Regulators and Line Pressure Regulators FRS../6 Series FRS 5... Series CSA Certified ANSI Z21.18 CSA 6.3 as a Gas Appliance Pressure Regulator ANSI Z21.80 CSA 6.22 (FRS/6 series
More informationPROTEGO Pressure and Vacuum Relief Valves. Volume 6. in-line. Edition for safety and environment
PROTEGO Pressure and Vacuum Relief Valves inline Volume 6 Edition 2009 PROTEGO at a glance More than 50 years ago, PROTEGO started developing special devices for protecting systems against explosions
More informationDual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationGas Appliance Pressure Regulators with integrated gas filter. FRI/6 Series
Gas Appliance Pressure Regulators with integrated gas filter FRI/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 Gas Appliance Pressure Regulator File # 1135455 EU Gas Appliance Directive EN 88 CE-0087 AU
More informationSTAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE
MAIN CHARACTERISTICS The stainless steel LPRV elite low pressure reducer is intended for the pressure reduction of the fluids such as water, air, clear liquids not in charge of and the compatible gases
More informationZUERCHER BR Series LOW PRESSURE IN-LINE & ANGLE-PATTERN TANK PRESSURE REDUCING REGULATORS
Pressure/Vacuum Rating Max inlet pressure: 16 Barg Max back-pressure: 2 Barg Vacuum tight. Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationGas Pressure Regulator HON 505
product information serving the gas industry worldwide Application, Characteristics, Technical Data Application for gas supply for natural gas and all non-corrosive gaseous media Characteristics compact
More informationGas Appliance Pressure Regulators with integrated gas filter. FRI/6 Series
Gas Appliance Pressure Regulators with integrated gas filter FRI/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 Gas Appliance Pressure Regulator File # 1135455 EU Gas Appliance Directive EN 88 CE-0087 AU
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features? Suitable for
More informationPressure Regulator 133 / 233
Benefits Accurate regulation Exchangeable component technique Easy maintenance Suitable for HTB requirements DVGW-approval (DIN 3380/81, VP 200). Description The 133/233 regulator is a direct-acting, spring
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationPressure/Vacuum Diaphragm Valve PROTEGO UB/SF. deflagration- and endurance burning-proof
deflagration- and endurance burning-proof PROTEGO UB/SF 7 Ø b 4 The set pressure is adjusted with a freeze resistant water-glycol mixture, which assures safe operation under extreme cold weather conditions.
More informationDual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11 Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked C/I
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationSERIES 10. Pilot Operated Tank Blanketing Valve, 2" PROTECTOSEAL.
SERIES 10 PROTECTOSEAL 2" NPT inlet and outlet standard Pilot operated design provides tight operating band Optional inlet and outlet connections available Inlet gas pressures from 40 PSIG to 130 PSIG
More informationM A B MAB INFLATABLE GASKET SLIDE VALVES SERIES TSV FOR POWDERED AND GRANULAR SOLID MATERIALS
Automatic slide valves type TSV-150 with inflatable sealing system. The range of TSV slide valves supplied by MAB can always close against a head of flowing solids. The TSV series of inflatable gasket
More informationPILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation
More informationThe Shand & Jurs Model Vapor Guard Tank Blanketing Valve
Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationRR 16 Commercial & Industrial Regulator
RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate
More information756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationDual Modular Safety shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634
Dual Modular Safety shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634 Two normally closed automatic shutoff valves in one housing.
More informationNeotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions
Before installation these instructions must be fully read and understood 2 Safety Please read these instructions carefully. 2.1 General danger potential Not paying attention to this instruction Incautious
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationDual Modular Safety Shutoff Valves with NEMA 4x Enclosure DMV-D 704/604 DMV-DLE 704/604
Dual Modular Safety Shutoff Valves with NEMA 4x Enclosure DMV-D 704/604 DMV-DLE 704/604 Two normally closed safety shutoff valves in one housing; each with the following approval. CSA Certified ANSI Z21.21
More informationGas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
More informationDAV - WP DAV - WP. Wastewater Air Valves. Product Catalogue. (Wastewater Air Valves) DAV - WP
DAV - WP Wastewater Air Valves DAV - WP (Wastewater Air Valves) Product Catalogue DAV - WP DAV Series??? DAV-WP General DAV-WP Wastewater Air Valves The DAV-WP valve has been designed for efficient discharge
More informationDual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series
Dual Modular Safety Shutoff Valves with Proof of Closure DMV-D/622 Series DMV-DLE/622 Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof of closure. Each
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationDual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11 Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked C/I
More informationDual Modular Safety Shutoff Valves with Two-stage operation. DMV-ZRD/602 Series DMV-ZRDLE/602 Series
Dual Modular Safety Shutoff Valves with Two-stage operation DMV-ZRD/602 Series DMV-ZRDLE/602 Series Two normally closed automatic shutoff valves in one housing; each with the following approvals. UL Recognized
More informationANDERSON GREENWOOD TANK BLANKETING REGULATORS
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance.
More informationDual Modular Safety Shutoff Valves with Two-stage operation. DMV-ZRD/602 Series DMV-ZRDLE/602 Series
Dual Modular Safety Shutoff Valves with Two-stage operation DMV-ZRD/602 Series DMV-ZRDLE/602 Series Two normally closed automatic shutoff valves in one housing; each with the following approvals. UL Recognized
More informationLiquid ring compressors
Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
More informationSafety Shut-Off Valve HON 720
Safety Shut-Off Valve HON 70 Product information serving the gas industry worldwide Application, Characteristics, Technical Data Application main safety device for gas pressure regulating stations suitable
More informationDual Modular Safety Shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634
Dual Modular Safety Shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634 Two normally closed automatic shutoff valves in one housing.
More informationsafety shut-off Valve HON 703 / HON 704
safety shut-off Valve HON 703 / HON 704 Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Main safety device in gas pressure regulating systems
More informationRTG 311 pressure regulators are included within the direct acting and balanced valve regulator class.
Introduction RTG 311 pressure regulators are included within the direct acting and balanced valve regulator class. The regulator is used for reducing and regulating the pressure of natural gases and LPG,
More informationSlam Shut Valves SCN
Slam Shut Valves SCN SCN > Slam shut valves Introduction SCN is a compact safety device (SAV) which quickly intercept gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationDiaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
More informationANDERSON GREENWOOD TYPE 4020 ATMOSPHERIC PRESSURE AND VACUUM RELIEF VALVES
Weight or spring loaded valves capable of providing pressure and vacuum relief that vent to atmosphere. esigned and tested to reduce costs and emissions with higher flow capacities and industry leading
More informationFRM. Medium Pressure Regulator. Medium pressure regulator Type FRM
FRM Medium Pressure Regulator Medium pressure regulator Type FRM Direct acting pressure regulator with adjustable setpoint springs and modular mounted safety shutoff valve (SAV) In compliance with EN 334
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationSeated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange
Data sheet Seated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange Description VL 2 VL 3 VL 2 and VL 3 valves provide a quality, cost effective solution for most water and chilled applications.
More informationGAS PRESSURE CONTROL UNIT TYPE 132
GAS PRESSURE CONTROL UNIT TYPE 132 OUR DIVERSITY IS YOUR PROFIT. Gas Pressure Regulator Type 132 Scope of Application Scope of type 132 gas pressure regulator is to maintain the output pressure at a constant
More informationSolenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
More informationLiquid ring compressor
Liquid ring compressor KLH 47005, KLH 47105 Compression pressures: Suction volume flow: 2 to 11 bar 56 to 65 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors of
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
More informationSITRANS P measuring instruments for pressure
Remote seals for transmitters and pressure gauges Technical description Overview In many cases the pressure transmitter and the measured medium have to be physically separated. It is then necessary to
More informationPROTEGO Pressure/Vacuum Relief Valves. Volume 7. w ith Flame Arrester - end-of-line. for safety and environment
PROTEGO Pressure/Vacuum Relief Valves w ith Flame Arrester - end-of-line Volume 7 for safety and environment PROTEGO - at a glance More than 50 years ago, PROTEGO started developing special devices for
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationsafety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationGas Pressure Regulator RMG 201
Product information serving the gas industry worldwide Application, characteristics, technical data Application application in industrial stations for small flowrate regulating lines in gas pressure regulating
More informationDual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure DMV-D/624L Series DMV-DLE/624L Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof
More informationM45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
More informationWastewater combination air valve in stainless steel AISI 316 Mod. SCS
Wastewater combination air valve in Mod. SCS The air valve guarantees the proper operation of sewage/industrial lines allowing the entrance of large quantity of air in case of pipe bursting or draining,
More informationGas Pressure Regulator HON 300
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction
More informationDual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure DMV-ZRD/612 Series DMV-ZRDLE/612 Series
Dual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure DMV-ZRD/612 Series DMV-ZRDLE/612 Series Two normally closed automatic shutoff valves in one housing. Valve 1 (V1) incorporates
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationSIHI LPH-X - Liquid Ring Compressors
- Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a
More informationPneumatic proportional controller Types M Types FM Function tested for use of the float in Ex-zone 0
Operating Manual LTIA5E Pneumatic proportional controller Types M Types FM Function tested for use of the float in Ex-zone 0 Contents 1. Safety Instructions 2. Conformity to standards 3. Technical data
More informationGas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationModel 8800A. Pressure Relief and Vacuum Breaker Valve with Flame Arrester
MODEL 8800A USED ON DIGESTERS AND GAS HOLDERS A combination of the Groth Model 1200A pressure relief and vacuum breaker vent and Groth Model 7618 flame arrester make up the unit. The superior Buna-N seating
More informationDual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure. DMV-ZRD/612 Series DMV-ZRDLE/612 Series
Dual Modular Safety Shutoff Valves with Two-stage operation and Proof of Closure DMV-ZRD/612 Series DMV-ZRDLE/612 Series Two normally closed automatic shutoff valves in one housing. Valve 1 (V1) incorporates
More informationDual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure DMV-D/624L Series DMV-DLE/624L Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
More information