SafeLandUSA - Syllabus
|
|
|
- Clement Day
- 5 years ago
- Views:
Transcription
1 1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents need investigation 2. Accident Prevention Signs and Tags Types and meaning of signs and tags Definition and design 3. Hand Safety 4. Material Handling 5. Behavioral Safety General safety rules "Right tools for the job" Types of cutting tools, Pocket Knife, Machete, Bush Knife, Hatchets Causes of hand injuries Materials Handling Equipment Forklift Safety Cranes, Rigging & Tag Lines Working with Hand tools Cheater Bar/Pipe Personal Lifting Introduction Why back injuries occur - Back Injury Prevention Lifting Safely - Safety Tips for Lifting Alternatives to Lifting - Behavior Based Safety Making an Observation 6. First-Aid/CPR/AED Considerations Respond only to level trained and know who is trained Location of Emergency Contact Numbers and Equipment Bloodborne Pathogens
2 7. Confined Space 8. Lockout/Tagout Hazards of Confined Spaces Categories: Permit Required vs. Non-Permit Required of Lockout/Tagout Identifying Hazardous Energy Procedures - Lockout Only, Tagout Only, Group Lockout, Removal of Locks and Tags 9. Drug and Alcohol / Substance Abuse Government Regulations / Company Requirements Testing Supervisor Training Requirements: Reasonable Suspicion Employee Awareness: Effects and Consequences 10. Hazard Communication of Hazard Communication Identification of Chemicals: MSDS, Labels and Warning, Chemical Inventory Training Requirements 11. Electrical Safety of Electrical Safety Causes of Electrical Accidents Results of Unsafe Work Practices Energized vs. De-energized Working Near Exposed De-energized Parts Working Near Energized Equipment Overhead Line Safety Portable Electrical Equipment Inspecting Welding Leads / Electrical Cords / GFCI Electrical PPE 12. Intervention / Stop Work Authority Management Leadership / Support of Intervention Describe an individual s responsibilities to do interventions Explanation of how interventions are used (Examples)
3 13. Fire Prevention and Portable Fire Extinguishers of Fire Protection, Prevention, and Detection Respond only to level trained and know who is trained Elements/Causes of Fire Fire Classification Extinguishing Methods / Types of Extinguishers 14. Walking Working Surfaces Guarding Floor and Wall Openings and Holes Housekeeping Scaffolding/Ladders Stairways/Handrails 15. Job Safety Analysis / Pre-Job Planning of Hazard Identification JSA Elements (Job steps, Hazard Identification, Mitigation) 16. Personal Protective Equipment, Respiratory PPE Eliminate - Control - Protect Selection, Fit, Adjustment of PPE Eye and Face Protection Head, Foot and Hand Protection Respiratory Requirements - Types of Respirators Hearing Protection Protective Clothing and FRC 17. Prevention of Workplace Violence Responsibilities - Recognition and Notification 18. Working at Heights Only work to your level of training Responsibilities - Prevention of dropped objects and falls Personal Protective Equipment and Inspection Requirements Equipment for working at heights (Manlifts, Fall Protection Systems)
4 19. Permit To Work Types of Permits - Examples: Confined Space, Hot Work, LOTO, etc. 20. Driver Safety / Transportation Safety / Statistics No Cell-phone use while driving / Driving Distractions Valid Driving Licenses / Certifications / Endorsements Adverse Weather - Road Conditions - Wildlife Fatigue Vehicle condition/inspections Journey Management Backing/Parking/Location Hazards Loading Securement and Off-loading Seatbelt usage Driving under the influence 21. ENVIRONMENTAL Federal and State Regulations & Compliance and Reporting Response and Reporting of discharges, leaks & spills Minimize waste All wastes go in specific containers of HAZWOPER 22. EXCAVATION - TRENCHING & SHORING Identification of Underground Hazards / ONE CALL 811 Levels of Training / Competency Requirements Safe Work Practices / Procedures / Permits Hazards Recognition and Mitigation Use of Personal Protective Equipment Hazardous Atmospheres Emergency Response Plans
5 23. Industrial Hygiene / Occupational Health Exposure Types - Skin contact, Inhalation, Ingestion, Radiation (Ionizing & Non-Ionizing), Noise, etc. Common Hazards - Benzene, Lead, H2S, CO2, NORM, Mercury, Diethanolamine, Hexavalent chromium, methanol, welding fume, N2, Fibers (Asbestos, Mineral, etc.), Fumes, Liquids, Weather, Dust, Biological, etc. Monitoring and Mitigation Thermal Stress 24. Site Specific Hazards and Emergency Evacuation Banned Items - Weapons i.e. Firearms, ammunition, clubs, etc., Illegal drugs, Alcohol, Lighters/matches, Explosives New Personnel - Short Service Program (Identification, Mentoring, etc.) Reporting to Work - Fitness for Duty Emergency Planning/Response (alarms, muster areas, etc.) Wildlife Weather Conditions - Lightning, Windstorm, Hurricane, Tornado, UV exposure, Snow & Ice, Flooding, etc. Simultaneous Operations / Communication
West Texas Safety Training Center
West Texas Safety Training Center SafeLand USA Outline Lesson 1- Introduction Importance of Training o Workplace injuries are costly o Benefits of safe behavior/attitude is contagious Introduction topics
IADC HSE RIG PASS ORIENTATION PROGRAM EMPLOYEE ASSESSMENT CHECKLIST FORM SCO-16 I. GENERAL SAFETY
IADC HSE RIG PASS ORIENTATION PROGRAM EMPLOYEE ASSESSMENT CHECKLIST FORM SCO-16 INSTRUCTIONS: This form may be used to document an employer's participation in a basic orientation program. As each topic
Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
A Different Sort Of Knowledge Box
The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard
9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR
New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted
Return the completed questionnaire, OSHA 300A Summary form and EMR Rating via e- mail.
EHS CONTRACTOR SAFETY It is the Mission of Olin Brass to Create an environment of safety excellence where an injuryfree work place is achieved through continuously confronting and correcting unsafe conditions
SAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: TSMF REVISED: 09-11-09 The following summarizes the orientation requirements for new employees at the facility. This plan augments the company
NSC Online Workplace Training
ACCIDENT INVESTIGATION What is an Accident Investigation? Learn why an accident investigation is conducted and how to plan the investigation. Importance of gathering information Conducting an effective
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,
Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments
Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness
Online Course and Lesson Objectives
Online Course and Lesson Objectives 2 0 0 6 - No Downtime - No Travel Expenses - Available 24/7 - Customization - High Retention - Scalability Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED:
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: BROWN-MINNEAPOLIS TANK-SOUTHWEST (ALBUQUERQUE FABRICATION PLANT) REVISED: 09-11-2009 The following summarizes the orientation requirements
http://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and
Committed to Providing Quality Safety Products and Services. Online Training
Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to
GIVE ME FIVE VIDEO EXCHANGE CLUB
GIVE ME FIVE VIDEO EXCHANGE CLUB The following programs are available to club members on DVD. An (S) beside a title denotes availability in Spanish. ATTITUDES & MOTIVATION 4778 Take Action To Avoid Distraction
Access Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
Access Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
We also ask our subcontractors and partners to. At EHS Support we re passionate about safety. The. ensure the safey of themselves, their coworkers and
Golden Rules of Safety July 2014 EHS Support s commitment to environmental, health, At EHS Support we re passionate about safety. The We also ask our subcontractors and partners to ensure the safey of
OSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
Written Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
Accident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
Table of Contents. Chapter 1: Health, Safety and Environment Programs. Chapter 2: General Guidelines and Health Control
IADC Health, Safety and Environmental Reference Guide Table of Contents Chapter 1: Health, Safety and Environment Programs Safety Policy Statement... 1 HSE Meetings... 1 Safety Inspections and Logbooks...
Harley-Davidson Motor Company
Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds
SH&E Training Matrix (Americas, all Business Groups)
SH&E Training Matrix (Americas, all Business Groups) Employee Name: Location: Employee Number: Date: Table 1: All Employees 10 Hour Outreach Course (OSHA General Industry or Construction) 30 Hour Outreach
OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE Each University of Maine employee, Faculty, graduate student, and undergraduate shall take the University of Maine Basic Safety Training
Job Hazard Analysis Form (JHA)
Job Hazard Analysis Form (JHA) This form can be used by all Sanford Underground Research Facility (SURF) employees as well as contractors, subcontractors, and science collaborators. This is a dynamic document
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION Revised July 2015 COURSE INFORMATION This course description catalog describes courses offered by or through the Department of
BRIT TEAM PLATEFORM Training Module List
BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct
EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
On-Demand SAFETY Learning Library Catalog
On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com
SUGGESTED TRAINING BY JOB TITLE
As of September 1, 2017 's Aide Art Coach or PE Science Substitute Shop Bus EMERGENCY MANAGEMENT Active Shooter: s S S 37 min Active Shooter: Staff S S S S S S S S S S S S S S S S S S S X 41 min Crisis
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
Safety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
SAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
Directory of Safety Services and Courses
639 N. Salina St., Syracuse, NY 13208 Environmental, Health & Safety Phone: 315-428-1959 Fax: 315-428-0432 Consultants www.churchillenvironmental.com Directory of Safety Services and Courses Office (315)
Job Hazard Analysis. University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195
Job Hazard Analysis University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195 Working Job Title: Utility Worker 2 (CEO) JHA Completed by Date: The Job
Potential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
Safety Training Source
Safety Training Source COURSE CATALOG APRIL 2018 MAP CLIENT SERVICES MAP@SAFETYNATIONAL.COM Table of Contents Accident Investigation - CLMI (Streaming Video)...5 Accident Investigation for Healthcare (Streaming
PHCC Educational Foundation Safety Library OSHA General Industry
PHCC Educational Foundation Safety Library OSHA General Industry http://phccweb.360training.com Course Package General Industry Library Package 31.0 hours - $99.00 Package contains following courses: Beryllium
ONLINE COURSE & LESSON OBJECTIVES
S Trainingweb ONLINE COURSE & LESSON OBJECTIVES 1310-0018 www.safetyontheweb.com 800.842.0466 Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3 Ammonia Safety...3 Asbestos Awareness...4
10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training INCIDENT AT DUKE UNIVERSITY Wednesday April 15, 1998 7.51 a.m. EDT Firefighters reported t the Gross Chemical Building after the
SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
Health and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training Why Do We Care About Safety? >30,000 students/faculty/staff >1,000 research laboratories Chemical, Radiological, Biological Lasers,
GOLDEN SAFETY RULES AFT DR
GOLDEN SAFETY RULES The Golden Safety Rules exist to keep you safe Your safety and the safety of your workmates is paramount. The Golden Safety Rules exist, above all else, to keep you safe. Since we adopted
Responsibilities / Accountability
Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety
Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t
JO CHESM Field Inspection Checklist Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t This checklist provides a format for the recording of observations at work sites visited during the inspection.
Self Inspection Checklist
Self Inspection Checklist Name: Date: Job Name: Title: Time: Job Number: Instructions: Review each lettered subpart under each section that you are responsible for completing. If you have inspected all
JJ Keller Safety Group Approved Courses
JJ Keller Safety Group Approved Courses For a complete list of course available through JJ Keller, please visit www.pinnacol.com/training Aerial Lifts in Industrial and Construction Environments (45-60
Contractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
SH&E Training Matrix (EMIA)
SH&E Training Matrix (EMIA) Employee ame: Location: Employee umber: Date: 1. Table 5 All Employees - EMIA Required Employee induction within one week of starting at AECOM As required by client of local
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS Page 1 of 6 RFP 16-PR-DEM-33 Comprehensive All-Hazards Risk Assessment The Contractor shall comply
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
Recognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
DEPARTMENT SCHOOLS OF HEALTH. respiratory protection. Proper adherence to bloodborne pathogen handling protocols.
ANIMAL WORK: Work in laboratories, procedure rooms, surgery rooms and animal housing facilities containing animals. Refer to specific Animal Care Protocols. All lab workers who work in a lab conducting
ISS Safety Rules. Make safety second nature
ISS Safety Rules Make safety second nature 2 ISS SAFETY RULES ISS SAFETY RULES 3 INTRODUCTION We are a company driven by close to 500,000 strong people spread across 77 countries around the globe. And
HAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
TeST. Tokio Marine s e-safety Training 2016/2017 Catalog. 1 P age
TeST Tokio Marine s e-safety Training 2016/2017 Catalog In partnership with Health and Safety Institute, and Summit Training Source. Powered by OTIS Learning Management System. 1 P age OSHA Courses...
6. Each mitigation was verified and individually documented
CHESM/MSW Field Verification Instructions: All information in sections A, B and C must be completed. Information in section B related to subcontractors should be obtained from the work crew if possible.
Safety and Health. Basic Foundations Series 719 LESSON PLANS LP
Safety and Health Basic Foundations Series 719 LESSON PLANS 710719LP P U B L I S H I N G Safety and Health 719 Instructor Support Material: Lesson Plans Schoolcraft P U B L I S H I N G 710719LP How to
DEPARTMENT SCHOOLS OF HEALTH
PATIENT LIFTING: Work with patients/human subjects may involve lifting and moving of patients. Exposure to physical injury from lifting and moving of patients/human subjects. Avoid unnecessary exposures.
CONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM I. Purpose This Confined Space Program has been developed in accordance with the Occupational Safety and Health Administration (OSHA) regulations 29 CFR 1910.146. The purpose of
Respiratory Protection
Respiratory Protection Purpose The purpose is to establish a set of guidelines for the selection of respiratory protection equipment, situations for its use, and training in the use of the respirator required.
New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
Approved for public release; distribution is unlimited.
EMERGENCY RESPONSE TO HAZARDOUS SUBSTANCE SPILLS AND RELEASES IN ARMY MILITARY TREATMENT FACILITIES TECHNICAL INFORMATION PAPER NO. 59-040-0915 PURPOSE. To provide compliance strategies for responding
Managing Injury Risk at Grain Handling Facilities. Matt Shurtliff Director of Safety and Environmental Issues J.D. Heiskell & Co January 17, 2018
Managing Injury Risk at Grain Handling Facilities Matt Shurtliff Director of Safety and Environmental Issues J.D. Heiskell & Co January 17, 2018 1 Before We Start If you re unsure of a safe way to do a
National Wireless Training Standard
Skills Based Training Subcommittee In Collaboration with Wireless Industry Safety Task Force and National Association of Tower Erectors (NATE) 2014 Contents Contents Definition of Job Classifications...1
A MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
KEY. DVD Item # Single Student Online Video Course Item # Instructor Streaming Video Course Item # Interactive Online Item # Length of DVD Program
A KEY DVD Item # Single Student Online Video Course Item # Instructor Streaming Video Course Item # Interactive Online Item # Length of DVD Program Available Languages: E/S - English and Spanish Combo
Safety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
OSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
OFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is
January 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable!
January 25, 2011 TO: Our Clients FROM: Will Johnson, Corporate Training Director SUBJECT: Increase your bottom line, safety is profitable! Ladies and Gentlemen: Workplace injuries and illnesses are preventable
Safety Orientation Communication
1.0 ACTIVITY DESCRIPTION 1.1 The purpose of safety orientation/communication is to make sure that all personnel are aware of applicable safety rules and procedures (work instructions) pertaining to their
What is an induction? Contribute to OH&S Processes
What is an induction? Session 2 Contribute to OH&S Processes Types of Induction New Employee Induction Site Inductions Equipment Inductions Activity 2.1 Induction Description What is a Hazard? Session
Contractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
Quality Companies USA TRAINING SYLLABUS
Quality Companies USA TRAINING SYLLABUS Quality Companies USA Quality Companies USA HSE / Training Group 425 Griffin Road Youngsville, LA 70592 (337) 857-6000 All right reserved. No part of this publication
SAFETY AUDITS: WHAT TO LOOK FOR TO ENSURE YOUR BUILDING IS REALLY SAFE. Presented by:
SAFETY AUDITS: WHAT TO LOOK FOR TO ENSURE YOUR BUILDING IS REALLY SAFE Presented by: Steve Wilder, BA, CHSP, STS Sorensen, Wilder & Associates Bradley, IL What is Safety Inspection A safety inspection
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
Certification of Occupational Hazard Assessment:
STATE OF NORTH CAROLINA DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES DIVISION OF WASTE MANAGEMENT Solid Waste Section PERSONAL PROTECTION EQUIPMENT PROGRAM AND HAZARD ASSESMENT Certification of Occupational
New Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
Collision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
Key Technology, Inc. Confined Space Entry Program. July, 2017
Key Technology, Inc. Confined Space Entry Program July, 2017 Page 1 of 11 Key Technology, Inc. CONFINED SPACE ENTRY PROGRAM OVERVIEW Purpose: The purpose of this program is to ensure the protection of
CITY AND COUNTY OF DENVER CR&CF RISK UNIT Job Hazard Analysis
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.4.1 Job Hazard Analysis 1.0 Introduction The Job Hazard Analysis (JHA) shall be used to describe task specific hazards and to identify control measures that
Appendix C Health and Safety Guidelines for investigators
38 Appendix C Health and Safety Guidelines for investigators Introduction Investigations must be conducted in a safe manner. This document provides an overview of the health and safety guidelines investigators
LIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0
2018 LIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0 ABOUT ENERGY SAFETY CANADA Energy Safety Canada is the national safety association for the oil and gas industry. We develop and support common industry
Surface exploration drilling
Checklist Surface exploration drilling This checklist is intended to assist employers to identify common hazards and manage risks associated with surface exploration drilling. June 2017 Background In surface
Section 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
Required Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
Minimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
Staffing Services Client Evaluation Form
Staffing Services Client Evaluation Form Client Name: Location: Contact(s): Completed By: A Safety Performance Experience Modification Factor? OSHA 300 Logs Available? # Of Injuries/Illnesses? Types of