Australian Standards. Constraints
|
|
- Arleen Crawford
- 5 years ago
- Views:
Transcription
1
2 Design Brief The client, Mr. Vaughn Anderson, the Technology Coordinator at Lyndale Secondary College, has requested the design and construction a motor vehicle or other device which can be programmed using PICAXE technology. He wants to use this device to help teach students in his year 9 and 10 programming classes how to write in the BASIC programming language. He believes that having a real world application for the program scripts will make the class more interesting for his students. The client has left various specifications for the design of this unit. He has stated that the vehicle must cost no more than $80 per unit, and that it must be no larger than the size of an A4 sheet of paper (approximately 20cm x 30cm). He has also requested that, if possible, the unit be controlled by an infrared remote control, as this will further engage his students. If this is not possible, the device must be able to run forward and, on contact with a wall or other item, be able to reverse and turn in order to manoeuvre around the object. The PCB used in the unit must be enclosed so that there are no exposed wires or components, but at the same time, must be accessible via an access panel, so as to allow for repairs. The batteries must also be accessible so that they are able to be replaced easily. The only visible components may be the stereo socket, to allow for the programming of the PICAXE chip, or any other necessary components such as infrared sensors or switches. Although not directly specified, the device should be visually appealing, so a shell to enclose the vehicle should also be designed and produced. Not only will this make the buggy visually appealing, but it will help to meet the client s specification that there should be no visible unnecessary components. The shell and device should also be durable enough to withstand prolonged use. As the device will only be used during class time, it will need to be able to operate in a computer class room environment. Therefore, it must be capable of operating on carpet, table tops and possibly tiles. It should also move at a reasonable, slower speed, as it is not going to be used in an open or outdoor environment. After taking the above specifications into account, I have decided to design and construct a buggy which can be programmed to operate via either an infrared remote control, or switches mounted on the front of buggy. This way, the client can use it as a reversible buggy is desired. By making use of a PICAXE-14M chip, it will be possible for the buggy to be programmed using the BASIC programming language as specified. The base of the buggy will be made from a commercial track and wheel set and gearbox from Tamiya, whereas the shell to enclose the PCB and batteries will be designed and constructed from aluminium.
3 Considerations Function: As the system is a remote controlled toy car, its function is to respond to an infrared input device and move in the direction stipulated by the PICAXE program. The system can be programmed via USB port and its responses to the infrared device are editable. This is to allow the actions undertaken after an input to be altered by the user, thus making the operation of the system more flexible. The overall function of the system, however, is to convert chemical energy from the batteries, into rotational and linear motion. This is achieved by the system s gearbox, motors and wheels. Purpose: The purpose of the overall system is to help teach IT students the BASIC programming language. The system can be used by IT teachers as a real world example of how programming is used in everyday life. The students can write their own programs then download it to the buggy to see how it works in real life, instead of using on screen simulators. Having a real world application for the programs will engage students as well as help to further their understanding of software development and information technology. The purpose of the systems circuitry is to receive an infrared signal, then process it accordingly. The effect of this is generally to move the buggy in a desired direction with the use of the motors and wheels attached to the circuit. Materials: The materials used to construct the shell of the buggy need to be strong and durable enough to withstand prolonged use. However, the materials used cannot be too heavy, as this may affect the operation of the vehicle. Safety: During construction of the product, many different tools and other equipment will be used. Some of these may cause harm to the user, if not used carefully. A risk assessment criteria sheet will need to be constructed and adhered to throughout the process of constructing this device.
4 Australian Standards AS/NZS 4360:2004 These are the Australian Standards on risk management. They outline the process for identifying, analysing, evaluating and treating, any risks associated with the construction of this, or any other device. The Risk Management Guidelines AS/NZS 4360:2004 Booklet can be purchased from for more detailed information on risk management in Australian workplaces. AS/NZS 3000:2007 These are the Australian Standards for Wiring Rules. These rules and guidelines are mostly for electricians, but some may be applicable to this project. These guidelines can be purchased online from Constraints Cost: The client has requested that the overall cost of the product not exceed $80, this is so that he can afford to purchase 12 of these units for his programming class. Size: The requested size is no larger than 20cm x 30cm, approximately the size of an A4 sheet of paper. This is to allow a class set of units to be carried in a single crate. Time: There is an approximate time limit of 35 weeks from the time of receiving the client s letter to the due date of the project. Available tools and equipment include: Soldering iron, drill press, hot glue gun, computer, milling machine, metal lathes, plastic heater, and a sheet metal bending brake. for the production of the PCB include: Blank printed circuit boards, solder, insulated copper wire, heat shrink, mixed components, various types of switches, breadboards, and serial cables for programming the PICAXE chip. for building the buggy s shell include: Sheets of aluminium, coloured plastic, wheels, motors, gear boxes, track and wheel sets, glue, hinges, screws, batteries and battery housing.
5 Likelihood RISK ASSESSMENT MATRIX Determining the Level of Risk This document can be used to identify the level of risk and help to prioritise any control measures. Consider the consequences and likelihood for each of the identified hazards and use the table to obtain the risk level. Consequences 1 Insignificant Dealt with by in-house first aid, etc 2 Minor Medical help needed. Treatment by medical professional/hospital outpatient, etc 3 Moderate Significant non-permanent injury. Overnight hospitalisation (inpatient) 4 Major Extensive permanent injury (eg loss of finger/s) Extended hospitalisation 5 Catastrophic Death. Permanent disabling injury (eg blindness, loss of hand/s, quadriplegia) Almost certain to occur in most A - circumstances High (H) High (H) Extreme (X) Extreme (X) Extreme (X) B - Likely to occur frequently Moderate (M) High (H) High (H) Extreme (X) Extreme (X) Possible and likely to occur at some C - time Low (L) Moderate(M) High (H) Extreme (X) Extreme (X) D - Unlikely to occur but could happen Low (L) Low (L) Moderate(M) High (H) Extreme (X) May occur but only in rare and E - exceptional circumstances Low (L) Low (L) Moderate (M) High (H) High (H) How to Prioritise the Risk Rating Once the level of risk has been determined the following table may be of use in determining when to act to institute the control measures. Extreme Act immediately to mitigate the risk.either eliminate, substitute or implement engineering control measures. Remove the hazard at the source. An identified extreme risk does not allow scope for the use of administrative controls or PPE, even in the short term. High Medium Low Hierarchy of Control Elimination Substitution Engineering Controls Administrative Controls Personal Protective Equipment Act immediately to mitigate the risk. Either eliminate, substitute or implement engineering control measures. If these controls are not immediately accessible, set a timeframe for their implementation and establish interim risk reduction strategies for the period of the set timeframe. Take reasonable steps to mitigate the risk. Until elimination, substitution or engineering controls can be implemented, institute administrative or personal protective equipment controls. These lower level controls must not be considered permanent solutions. The time for which they are established must be based on risk. At the end of the time, if the risk has not been addressed by elimination, substitution or engineering controls a further risk assessment must be undertaken. Take reasonable steps to mitigate and monitor the risk. Institute permanent controls in the long term. Permanent controls may be administrative in nature if the hazard has low frequency, rare likelihood and insignificant consequence. Controls identified may be a mixture of the hierarchy in order to provide minimum operator exposure. Eliminate the hazard. Provide an alternative that is capable of performing the same task and is safer to use. Provide or construct a physical barrier or guard. An achievable timeframe must be established to ensure that elimination, substitution or engineering controls are implemented. NOTE: Risk (and not cost) must be the primary consideration in determining the timeframe. A timeframe of greater than 6 months would generally not be acceptable for any hazard identified as high risk. Interim measures until permanent solutions can be implemented: Develop administrative controls to limit the use or access. Provide supervision and specific training related to the issue of concern. below) Develop policies, procedures practices and guidelines, in consultation with employees, to mitigate the risk. Provide training, instruction and supervision about the hazard. Personal equipment designed to protect the individual from the hazard. (See Administrative Controls Health & Safety Services July
6 RISK ASSESSMENT SUMMARY Topic: Date: Issue No. Review date: Identify Hazards and subsequent Risks Analyse Risks Evaluate Risks Identify and evaluate existing risk controls Further Risk Treatments Hazards/Issues/Risks Consequence Likelihood Risk level Burns from soldering iron What we are doing now to manage this risk. 2 C M Use soldering iron stand Solder in eye 5 D X Wear safety glasses Inhalation of fumes from solder 1 B M Electrical shock 3 E M Dropping tools on feet Cut by sharp objects such as saws Hair/clothing caught in drill press 1 C L 2 C M 4 D H Use solder only in well ventilated areas Check all power cords to assure there are no splits in the plastic Keep tools away from table edge Take care when using sharp objects Tie long hair back, remove hanging clothes, eg. ties Effectiveness of our strategies Mostly Effective Entirely Effective Entirely Effective Mostly Effective Partially Effective Partially Effective Mostly Effective New risk level L L L L L L L Further action needed Opportunities for improvement Wear safety gloves when working with soldering iron Wear protective shoes Wear safety gloves when using sharp objects Health & Safety Services July
7 Research and Annotations
8 4 Wheeled Designs 1 While this design looks interesting, it has too many visible wires, components and circuitry and it does not make use of infrared technology. 2 This design uses the base of a commercial remote control car. This is a good idea and would be easy to manufacture, however it would be expensive to purchase the base, and it may operate at a speed too fast for a classroom environment. 3 While this design looks nice and simple and easy to make, its circuitry is entirely visible. This does not meet the client s specifications.
9 2-3 Wheeled Designs 4 This design may meet some of the specifications, however, the circuit is not covered and the materials to make it are not readily available. 5 The small plastic wheels and low standing if this design would not allow it to run properly on carpet. Meaning it does not meet the client s specifications. 6 This design scored very low on the criteria, and, as such, would not be a suitable choice for this project.
10 7 I really like the idea of constructing the shell out of Lego pieces, however, these pieces are not readily available. Also, this design would not be very durable 8 This design looks interesting, however, the fact that its shell is made of the circuitry, means it does not meet the clients specifications of having an enclosed circuit and components. 9 This design doesn t look too appealing, nor does it use infrared technology. Also, its circuit is not enclosed, making it a bad choice for this project.
11 Track Wheeled Designs 10 This design is very suitable for classroom use, however it is not very durable and the circuitry is entirely exposed. 11 This design is nice and simple, however, its circuitry is not enclosed. 12 The circuit of this design sits on top of the buggy. This does not meet the client s specifications of having an enclosed circuit and components.
12 13 I like this design, however, its shell is not be easily removable. This means that it will be hard to repair any faulty components. 14 This design has too many exposed wires and components to be considered for this project. 15 This design would be a good choice for this project if the circuit and batteries were enclosed.
13 Conclusion While I like the look of some of these designs, I have decided that I will create my own shell design. Using some of these designs as inspiration, I will design a shell and circuit myself. One of the ideas I will incorporate into my system is the tracked wheel platform. I will use the design from image 11 as the base for my system, but will create a shell to enclose it, along with the circuit and batteries, so as to make it more appealing. Sources
14 Product Evaluation
15 Selection Criteria Can the device be programmed using PICAXE technology? Does the device use the BASIC programming language? Does the device cost less than $80 per unit? Is the device smaller than 20cm x 30cm? Can the device be controlled via an infrared remote control? Is the device capable of operating on carpet and table tops? Does the device move at a reasonable, slower speed? Are the PCB, wires, and other components enclosed? Is the PCB accessible for repairs? Are the batteries accessible for changing? Is the device durable enough to withstand prolonged use?
Risk Assessment Form
Risk Assessment Form School Activity Risk Assessment conducted by: Consultation occurred with: (names & role) Description of activity being assesses Batchelor Outdoor Education Centre Artificial Climbing
More informationRisk Assessment Form
Risk Assessment Form School Activity Risk Assessment conducted by: Consultation occurred with: (names & role) Description of activity being assesses Batchelor Outdoor Education Centre High and Low Ropes
More informationRisk Assessment Form
Risk Assessment Form School Activity Risk Assessment conducted by: Consultation occurred with: (names & role) Description of activity being assesses Batchelor Outdoor Education Centre Bush Walking Michelle
More informationCIRCUIT BREAKER TESTING - JOB SAFETY ANALYSIS
Title: Circuit Breaker Testing Purpose and Scope: Provide guidelines for testing of Circuit Breakers. Staffing Resources: Staff will have the minimum requirement of an Electrical Fitter/Mechanic Licence
More informationWork Health and Safety Risk Management Procedures
Work Health and Safety Risk Management Procedures Table of Contents 1. Governing Policy 2. Purpose 3. Scope 4. Definitions 5. Responsibilities 6. Risk Management Process 6.1. Process summary 6.2. Hazard
More informationTHE CONTROLLED COPY OF THIS DOCUMENT IS ON THE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR THE DATE AT THE BOTTOM OF THE PAGE.
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Using Angle Grinders SWMS No. 8 Authorized and email Signed by the
More informationProcedure: Work health and safety hazard management
Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation
More informationJob Safety Analysis. Macau PuiChing Middle School Ranger - Delphinus MATE ROV 2016
Job Safety Analysis Ranger - Delphinus MATE ROV 2016 Job safety analysis and control measures Prevention is better than cure, so prior to starting any task, evaluate the potential hazards and take the
More informationTelco Antennas SWMS Working At Height Above 2m
Telco Antennas SWMS Working At Height Above 2m A SWMS shall be developed for a task where the risk has been assessed as Medium or Higher Division: Date: SWMS No: (e.g. Installation, Engineering Workshop)
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationSafety Guidelines for Live Entertainment and Events I Part 2. Hazard Identification and Risk Management 1
Safety Guidelines for Live Entertainment and Events Part 2. Hazard Identification and Risk Management Contents Disclaimer... 1 1. Principles of Risk Management... 2 2. The Risk Management Process... 2
More informationSupervisors guide for managing reported hazards and incident (HS714)
Supervisors guide for managing reported hazards and incident (HS714) Version 4.1 27 February Health and Safety Unit Contents What happens when a hazard/ incident is reported?... 1 Steps to managing reported
More informationHS329 Risk Management Procedure
HS329 Risk Management Procedure Work Health and Safety Act 2011 Policy hierarchy link Work Health and Safety Regulation 2011 Work Health and Safety Policy Code of Practice How to Manage Work Health and
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationThe Best Use of Lockout/Tagout and Control Reliable Circuits
Session No. 565 The Best Use of Lockout/Tagout and Control Reliable Circuits Introduction L. Tyson Ross, P.E., C.S.P. Principal LJB Inc. Dayton, Ohio Anyone involved in the design, installation, operation,
More informationSAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT
SAFE WORK METHOD STATEMENT Part 1 EXCAVATOR AUGER ATTACHMENT Personal Protective Equipment Foot Hearing High Visibility Head Eye Day Operations Normal Requirements: Safety footwear, hearing protection,
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationSAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING
SAFE WORK METHOD STATEMENT Part 1 CONCRETE SAWING Personal Protective Equipment Foot Hearing High Visibility Head Eye Face Hand Protective Clothing Breathing Normal Requirements: Safety footwear, hearing
More informationWORK METHOD STATEMENT ALUMINIUM WINDOWS AND DOORS
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationHAZARD MANAGEMENT PROCEDURE
TABLE OF CONTENTS 1. OBJECTIVE... 2 2. SCOPE... 2 3. DEFINITIONS... 2 4. RESPONSIBILITIES... 2 5. HAZARD IDENTIFICATION... 3 5.1 HAZARD AND RISK IDENTIFICATION TOOLS AND METHODS... 3 5.1.1 Take 5 Risk
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationRISK ASSESSMENT FORM Project / Work Description: Handling of furniture.
Department & Exact Location Of The Work Performed: RISK ASSESSMENT FORM Project / Work Description: Handling of furniture. Risk Assessment Team (Name/s): Date Conducted: Approved By Supervisor / Reporting
More informationGuide to reporting hazards and incidents (HS713)
Guide to reporting hazards and incidents (HS713) Version 3.1 4 April 2013 Health and Safety Unit To assist in reporting hazards and incidents online Contents Importance of reporting hazards and incidents...2
More informationWORK METHOD STATEMENT TERMITE PROTECTION
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationPOSITION OF PERSON COMPLETING REPORT: IN CONSULTATION WITH: David Radolovic POSITION: HSR/ Program Coordinator
YMCA CENTRE: Parks Recreation Centre ASSESSMENT DATE: 04/08/2015 PROGRAM / AREA: Climbing Wall TASK / ITEM: Climbing Wall PERSON COMPLETING REPORT: Anthony Bates POSITION OF PERSON COMPLETING REPORT: Camping
More informationEvent / Process / Activity / Task Risk Assessment Template
Date Written: Date Reviewed: Next Review Date: 7//9 7//9 7//2 Bike mechanical failure causes injury Bike collision between two riders riding in the same direction Description: > have compression bandages
More informationHazard Assessment & Control. Faculty of Veterinary Medicine
Hazard Assessment & Control Faculty of Veterinary Medicine Emergency Evacuation In the event of an emergency Primary exit is to the. Secondary exit is to the. Assembly point is at. Campus Security Emergency
More informationWORK METHOD STATEMENT ELECTRICAL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationEVENT SAFETY RISK ASSESSMENT - (SMALL TO MEDIUM SIZED COMMUNITY EVENTS) 1
EVENT SAFETY RISK ASSESSMENT (SMALL TO MEDIUM SIZED COMMUNITY EVENTS) EVENT SAFETY MANAGEMENT INFORMATION SHEET September 2010 #3 RISK ASSESSMENT IT S A MUST The success of your event is measured in many
More informationPLANT RISK ASSESSMENT REPORT
PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/752 Assessment Date: 5 th May 2015 Company: Wacker Neuson Plant Type: Telescopic Light Balloon Make: Wacker Neuson Model:
More informationELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationMETHODOLOGY RISK TABLES TABLE 1 - QUALITATIVE MEASURES OF CONSEQUENCE OR IMPACT TABLE 2 - QUALITATIVE MEASURES OF LIKELIHOOD
METHODOLOGY This Assessment has been performed as outlined in Australian Standard AS/NZS ISO 31000:2009 with reference to tables 1, 2 and 3 below, for the use of leased land for the purposes of performing
More informationWH&S Act 2011 & Regulations 2011, Environmental Protection Act and Regulations
Workplace Address: Page 1 of PART 1: TASK DETAILS Client: JOB/TASK: Using Water blaster PART 2: RESOURCES Relevant Legislation/Codes Practice: Training Required: Equipment Used: Materials Used: Substances
More informationThis guidance explains what hazards and risks are and provides an overview of requirements under the Health and Safety at Work Act 2015 (HSWA).
Hazards and risks Health and Safety at Work Act (2015) Guidance Last updated: 31 May 2017 What this guidance contains This guidance explains what hazards and risks are and provides an overview of requirements
More informationCOMMISSIONING TESTS FOR NEW HV CABLES (UP TO 33 KV) JOB SAFETY ANALYSIS
COMMISSIONING TESTS FOR NEW HV CABES (UP TO 33 KV) JOB SAFETY ANAYSIS Title: Carry Out Field Testing Purpose and Scope: To identify the hazards and control measures associated with testing and commissioning
More informationRisk Management Guide
What is health and safety risk management? Risk Management Guide Risk Management is a proactive, logical and systematic approach of managing the uncertainty relating to potential risk, rather than responding
More informationRisk Assessment Procedure
Voltage, current testing, troubleshooting Infrared inspection Visual inspection, data collecting Risk Register ES Acc 6 4 1 1 6 36 ES < Acc 6 4 3 3 10 60 AF/AB 40 Acc 8 3 2
More informationJob Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationRemoving Yourself from Hazards During Equipment Operation
Removing Yourself from Hazards During Equipment Operation The safest way to work around electrical equipment is to turn it off. This is usually required by OSHA and NFPA 70E, but with some exceptions.
More informationJOB SAFETY ENVIRONMENT ANALYSIS (JSEA) Working With In Situ Testing Rigs
Personnel Involved Manager Project Operators Assistant Notes re Operator/Off-Sider Training Allan McConnell In situ testing is a niche business with very few rigs in Australia. There are no specific training
More informationCHRISTIAN YOUTH CAMPS BURLEIGH HEADS INDOOR ROCK CLIMBING
CHRISTIAN YOUTH CAMPS BURLEIGH HEADS INDOOR ROCK CLIMBING Activity Coordinator: Venue(s) Paramount Adventure Centre Ages Attending: Date of Excursion: The Process 1. Breakdown the activity into actions
More informationTLILIC2001 Licence to Operate a Forklift Truck
Learner Name: Learner ID: Learner Contact Number: Learner Email Address: Date Training Commenced: This Book Contains: Course Information. Review Questions. The following review questions are to be completed
More informationExample of an Occupational Health Risk Assessment
SITE: ASSESSMENT DATE: EQUIPMENT/ AREA/TASK: Floor Manual ASSESSED BY: TASK/ EQUIPMENT floor manual sorting HAZARD RISK PERSONS RATING EXISITING CONTROL MEASURES AT RISK S L R FURTHER ACTION REQUIRED R
More information-JHA- Job. For Science and Engineering. Hazard Assessment
-JHA- For Science and Engineering Job Hazard Assessment Is a Job Hazard Assessment Necessary? The Occupational Safety and Health Administration regulations confirm a JHA is needed. OSHA 1910.132(d)(2)
More informationMeet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
More informationFaculty/School: Faculty of Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES GS-3018 HAZARD IDENTIFICATION AND RISK ASSESSMENT Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager
More informationManaging for Liability Avoidance. (c) Lewis Bass
Managing for Liability Avoidance (c) Lewis Bass 2005 1 Staying Safe in an Automated World Keys to Automation Safety and Liability Avoidance Presented by: Lewis Bass, P.E. Mechanical, Industrial and Safety
More informationManual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
More informationPLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS
PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS Project: (insert Client) Replacement/ Repair of high level light units/ high
More informationCHRISTIAN YOUTH CAMPS BURLEIGH HEADS STAND UP PADDLE BOARDING
CHRISTIAN YOUTH CAMPS BURLEIGH HEADS STAND UP PADDLE BOARDING Activity Coordinator: Venue(s) Tallebudgera Creek Ages Attending: Date of Excursion: The Process 1. Breakdown the activity into actions (eg.
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT AUGER / POST HOLE DIGGER Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationCHRISTIAN YOUTH CAMPS BURLEIGH HEADS MOUNTAIN BIKING
CHRISTIAN YOUTH CAMPS BURLEIGH HEADS MOUNTAIN BIKING Activity Coordinator: Venue(s) Various (Nerang State Forest, The Boarder Track) Ages Attending: Date of Excursion: The Process 1. Breakdown the activity
More informationProvided by. Personal Protective Equipment. Workers Health & Safety Division HS96-101C (07-04)
Provided by Personal Protective Equipment Workers Health & Safety Division 08-02 HS96-101C (07-04) PERSONAL PROTECTIVE EQUIPMENT PROGRAM TABLE OF CONTENTS Development... 3 Hazard Assessment... 3 Choosing
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationPolicies, Procedures, Guidelines and Protocols
Policies, Procedures, Guidelines and Protocols Document Details Title Portable Electrical Equipment Management Policy Trust Ref No 701-29768 Local Ref (optional) Main points the document Responsibilities
More informationArchery Risk Management Plan Lutanda Yarramundi
Archery Risk Management Plan Lutanda Yarramundi School: Year: Dates: Program: Supervising Staff: Activity Context The archery range at Lutanda Yarramundi is located next to River Lodge on the left end
More informationPART 4: IMPLEMENTATION & OP
TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.2 Personal Protective Equipment (PPE) Learning Objectives To define what is Personal Protective Equipment (PPE). To describe the management & legal
More informationRisk Analysis & Management Plan
Purpose For excursions to our venues, certain groups are required to conduct a risk analysis & management plan. This is to be forwarded as required to the organiser of the group Process Breakdown The excursion/day
More informationFaculty/School: Pharmacy Initial Issue Date: Oct Dr. Alpesh Patel and Padmaja Dhanvate
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationCity University of Hong Kong. Health and Safety Risk Assessment for Workstations, Experiments and Research Projects
City University of Hong Kong Health and Safety Risk Assessment for Workstations, Experiments and Research Projects Objective The objective of risk assessment is to perform a careful examination of what
More informationConducting An Effective. Welcome!
Conducting An Effective An introduction to the Five Step Process of Job Hazard Analysis JHA-JSA-SWMS-AHA Introductions Welcome! What do you know about Job Hazard Analysis (JHA s)? Does OSHA require JHA
More informationOccupational Health & Safety
Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Entanglement Hired From All Master Hire Stores Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More informationGuidance: HSW Risk Assessment Methodology HSW-PR09-WI01. Objective. Implementation
1.0 Objective This Work Instruction is designed to assist in the assessment of health and safety and wellbeing (HSW) risk and suggested controls associated with hazards identified while working throughout
More informationAbseiling Risk Management Plan Lutanda Yarramundi
Abseiling Risk Management Plan Lutanda Yarramundi School: Year: Dates: Program: Supervising Staff: Activity Context Abseiling at Lutanda Yarramundi is located on the activity tower on the wall facing the
More informationEye and Face Protection
Eye and Face Protection Latest revised date: October 26, 2011 Page 1 of 9 1.0 Introduction Eye protection shall be worn wherever an individual is exposed to the threat of eye injury from contact with sharp,
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationMountain Bike Risk Management Plan
Mountain Bike Risk Management Plan Lutanda Mt Victoria School: Year: Dates: Program: Supervising Staff: Activity Context Riding Mountain bikes is a fun way to challenge participants in their confidence,
More informationStudent Shop Safety. University of Tennessee Safety Guide GS-005. Purpose. Scope and Applicability. Definitions and Abbreviations.
Student Shop Safety University of Tennessee Safety Guide GS-005 Document Contact: EHS Date effective: August 1, 2012 Revision Date: June 7, 2017 Purpose Machine shops are present in many departments and
More informationGround Fault Circuit Interrupter(GFCI) Policy
NewStar Netronics, LLC American Products for the World Ground Fault Circuit Interrupter(GFCI) Policy 3926 East 3 rd Street Tulsa, OK 74112 Phone (918)894-5006 Fax (918)836-9909 tech@newstarnetronics.com
More informationRISK ASSESSMENT HAZARD IDENTIFICATION AND RISK ASSESSMENT METHODOLOGY
RISK ASSESSMENT HAZARD IDENTIFICATION AND RISK ASSESSMENT METHODOLOGY A) RISK Risk concerns the deviation of one or more results of one or more future events from their expected value. Risk related to
More informationCodex Seven HACCP Principles. (Hazard Identification, Risk Assessment & Management)
Codex Seven HACCP Principles (Hazard Identification, Risk Assessment & Management) Logic sequence for application of HACCP Assemble the HACCP team Describe product Identify intended use Construct a flow
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationSafe Work Method Statements (SWMS)
Safe Work Method Statements (SWMS) The purpose of a SWMS is to list the steps of a particular task in your workplace, identify the hazards and associated risks in each step and recommend key safety controls
More informationSTFC QUANTITATIVE RISK ASSESSMENT PRO-FORMA
Ref: Description: Assessment Date: Location/Site: Assessor: Department: Assessment Team:: Persons Exposed: Activity/Task: Step 1 What are the hazards? Step 2 Who might be harmed and how? What are you already
More informationSMART!Hazard Manager PROCESS EXPLANATION
SMART!Hazard Manager PROCESS EXPLANATION Rankings Sorting Corrective Actions Priorities Filtering Charts CHANGING THE WAY THE WORLD MANAGES SAFETY The road to safety success! PROCESS EXPLANATION Ranking
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
More informationImportant Safety Information Enclosed
Important Safety Information Enclosed ShedBoss Safety Pack NOTE: ENSURE YOUR CONSTRUCTION CREW RECEIVES THIS PACK TO COMPLY WITH SAFE WORK AUSTRALIA CODE OF PRACTICE www.shedboss.com.au Important Safety
More informationGOLFER. The Golf Putting Robot
GOLFER The Golf Putting Robot Written By Wing Pan Yuen For EEL 5666 Intelligent Machines Design Laboratory December 05, 1999 Table of Contents Abstract Introduction Executive Summary Integrated System
More informationElectrical Safety For Managers Updated For E. ElectricalTrainingPro.com
Electrical Safety For Managers Updated For 2018 70E Daryn Lewellyn daryn@electricaltrainingpro.com ElectricalTrainingPro.com 877.393.9901 1 Fatalities From Exposure To Electricity 1992-334 Bureau of Labor
More informationHealth & Safety Policy & Plan. Rightway Roofing.
Health & Safety Policy & Plan. Rightway Roofing. Valid: 02/2012-02/2013 Contents ( 1 ) Policy Statement. ( 2 ) Hazard Identification. ( 3 ) Hazard Management. ( 4 ) Induction & Training. ( 5 ) Monitoring
More informationThe NXT Generation. A complete learning solution
The NXT Generation A complete learning solution 2008 The NXT Generation LEGO MINDSTORMS Education is the latest in educational robotics, enabling students to discover ICT, science, D&T and maths concepts
More informationWORK METHOD STATEMENT RENDERING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationRockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS
Business Procedure Hot Work Document Number OHS-PROC-128 This document applies to the following sites: All Sites Rockhampton Office Brisbane Office Tarong Site Barron Gorge Hydro PS Kareeya Hydro PS Mica
More informationHazard & Risk Management
Hazard & Risk Management Introduction The Church recognises WHS hazards and risks must be appropriate managed to ensure, so far as reasonably practicable, the health and safety of all workers at Church
More informationa. identify hazardous conditions and potential accidents; b. provide information with which effective control measures can be established;
APPENDIX 2 TO ANNEX E TO SECTION 13 JOB HAZARD ANALYSIS PROCESS 1. The JHA process is an excellent starting point to evaluate the actual way a job is performed. This process may identify specific improvements
More informationTop-Rope Climbing - conducted by Tinaroo EEC Staff
Top-Rope Climbing - conducted by Tinaroo EEC Staff Notes: Where a CARA activity guideline exists for the activity and the minimum requirements outlined cannot be met the activity must be modified or alternative
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
More informationSAFE WORK METHOD STATEMENT
SWMS No. 09 SEED COECTION Barung andcare Assoc Inc 38A Coral St, Maleny Qld, 4552 Tel: 07 5494 3151 Email: info@barunglandcare.org.au ABN: 48 562 796 065 VERSION CONTRO Original version Date of this version
More information