PE094: Applied Heat Transfer Equipment and Thermal Design in the Process Industry
|
|
- Brian Darrell Booker
- 5 years ago
- Views:
Transcription
1 PE094: Applied Heat Transfer Equipment and Thermal Design in the Process Industry PE094 Rev.001 CMCT COURSE OUTLINE Page 1 of 6
2 Training Description: To provide practical and applied knowledge relating to the conditions of heat transfer and the workings of thermal equipment in the chemical and petroleum industries. Training Objective: Participants will be trained in the thermal processes and equipment used in the process industries. The course discusses basic heat transfer principles and how an engineer can use them, in conjunction with the characteristics of the materials and the process to design, specify, and select equipment that will be cost effective and reliable. The examination of existing units to determine whether they will be able to operate at debottleneck conditions is also discussed. The detailed thermal design of shell and tube heat exchangers and heat recovery equipment is also discussed as an optional course module. Training Designed for: This course is intended for all individuals who are inexperienced with heat transfer issues and equipment used in process industries. Also, individuals who will be designing or debottlenecking heat transfer equipment in process industries; or who are managing and performing heat transfer analyses, thermal equipment design, debottlenecking, specification, or purchase. Training Program: DAY ONE: PRE-TEST FUNDAMENTALS AND CORRELATIONS Conduction Natural Convection Forced Convection Boiling Condensation Radiation BASIC PRINCIPLES Correlation Accuracy Physical Property Data Surface Area Ratio Finned Tube Effects Metal Temperatures (Clean/Fouled, Dew Point, Bubble Point, Corrosion) DAY TWO: PERFORMANCE OF HEAT EXCHANGE EQUIPMENT Effective LMTD F Correction Factor PE094 Rev.001 CMCT COURSE OUTLINE Page 2 of 6
3 Clean Versus Fouled Under-Surface/Over-Surface Wide/Tight Temperature Approaches Temperature Pinch Co-Current versus Counter-Current Fouling Factors SELECTION OF HEAT EXCHANGE EQUIPMENT Mechanical Design Fluid Characteristics Materials/Cost Heat Duty Temperature Level Pressure Level Pressure Drop Cyclic Service Safety/Reliability DAY THREE: TYPES OF HEAT TRANSFER EQUIPMENT Shell and Tube Exchangers Air Cooled Exchangers Plate Exchangers Spiral Exchangers Double-Pipe Exchangers Vertical Tube Bayonet Exchangers Fired Heaters Boilers Direct Contact Units Agitated Vessels Scraped Surface Units Evaporators APPLICATIONS Heat Loss/Gain Vessels/Tanks/Pipes Heat Transfer in Process Vessels Heat Transfer Fluids Cooling Water Systems SHELL AND TUBE HEAT EXCHANGER DESIGN TEMA Types Mechanical Design/Code Requirements Baffle Types Fluid Allocation Tubesheet Connections PE094 Rev.001 CMCT COURSE OUTLINE Page 3 of 6
4 Nozzle Sizing Cleaning Requirements Tube Pitch/Type Materials Effective Temperature Difference Pressure Drop Vibration Correlation Accuracy/Over-design Clean/Fouled Performance Data Requirements and Checking Service Conditions TEMA Specification Sheet Design Pressure and Temperature Pressure Protection Transient Conditions/Thermal Expansion/Start-up/Shut-down Piping Layout Computer Design Tools DAY FOUR: DESIGN METHODOLOGY Shell-Side Heat Transfer Controlled Tube-Side Heat Transfer Controlled Shell-Side Pressure Drop Controlled Tube-Side Pressure Drop Controlled Vibration Controlled Temperature Pinch Controlled CONDENSERS Effective Temperature Difference Vacuum Service Issues Pressure Drop Low Pressure Drop Designs Cross-flow Single Pass Vertical/Horizontal Multi-pass Knock-Back Nozzle Design Inerts/Venting VAPORIZERS Natural Versus Forced Circulation Vertical and Horizontal Vacuum/Static Head Effects Line Sizing/Return Nozzle Sizing PE094 Rev.001 CMCT COURSE OUTLINE Page 4 of 6
5 Stability/Flow Regime Fouling/Tube Velocity Heat Flux Tube Pitch Metal Temperature Layout Tube Length/Static Head/Column Cost Enhanced Surface Tubes Kettle Reboilers Entrainment/Disengagement Space DAY FIVE: HEAT RECOVERY COILS Materials Mechanical Design Metal Temperature Over-Surface Effects Pressure Drop Tube Pitch Finned Tubes Radiation Effects Control Design SPECIFICATIONS OF VENDOR-DESIGNED EQUIPMENT Heat Duty Temperature Profile Design Temperature and Pressure Description of Duty Pressure Drop Fouling Nozzle Locations Materials Gasket Materials Fluids Corrosion Allowance Layout Requirements Checking Performance/Debottlenecking (Fouling, Vibration, Leakage, Corrosion, Pressure Drop) Course Conclusion POST-TEST and EVALUATION PE094 Rev.001 CMCT COURSE OUTLINE Page 5 of 6
6 Training Requirement: Hand s on practical sessions, equipment and software will be applied during the course if required and as per the client s request. Training Methodology: This interactive training course includes the following training methodologies as a percentage of the total tuition hours:- 30% Lectures, Concepts, Role Play 30% Workshops & Work Presentations, Techniques 20% Based on Case Studies & Practical Exercises 20% Videos, Software & General Discussions Pre and Post Test Training Certificate(s): Internationally recognized certificate(s) will be issued to each participant who completed the course. Training Fees: As per the course location - This rate includes participant s manual, hand-outs, buffet lunch, coffee/tea on arrival, morning & afternoon of each day. Training Timings: Daily Timings: 07:45-08:00 Morning Coffee / Tea 08:00-10:00 First Session 10:00-10:20 Recess (Coffee/Tea/Snacks) 10:20-12:20 Second Session 12:20-13:30 Recess (Prayer Break & Lunch) 13:30-15:00 Last Session For training registration or in-house enquiries, please contact: Aisha Relativo: aisha@cmc-me.com Tel.: Training & Career Development Department PE094 Rev.001 CMCT COURSE OUTLINE Page 6 of 6
MU043D: Mechanical Seals
MU043D: Mechanical Seals Jun 26 28, 2018 / Dubai MU043 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This is an intensive, highly practical and useful five-day course. The participant will
More informationMU102: Mechanical Seals Applications for Rotating Machinery
MU102: Mechanical Seals Applications for Rotating Machinery MU102 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: All Rotating Equipment Machinery require controlling of the pumped fluids
More informationIE098: Advanced Process Control for Engineers and Technicians
IE098: Advanced Process Control for Engineers and Technicians IE098 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: Advanced Process Control and Loop Tuning and Analysis is designed to provide
More informationPE096: Overview of Gas Processing Technology
PE096: Overview of Gas Processing Technology PE096 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: This course is designed for a broad audience and is participative and interactive, utilizing
More informationIE073: Intrinsic Safety, Galvanic Isolation and Zener Barriers Technology & Applications
IE073: Intrinsic Safety, Galvanic Isolation and Zener Barriers Technology & Applications IE073 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: The hazardous-area circuits 'float' i.e. is
More informationT e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
More informationIE011: Process Control & Instrumentation Technology
IE011: Process Control & Instrumentation Technology IE011 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This intensive course covers fundamental and practical of instrumentation measurements
More informationIE068: Process Instrumentation Technology
IE068: Process Instrumentation Technology IE068 Rev.002 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This course covers fundamental and practical of instrumentation measurements including Flow
More informationIE039: Practical Process Instrumentation & Automatic Control
IE039: Practical Process Instrumentation & Automatic Control IE039 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: Process Control & Instrumentation is becoming an increasingly important
More informationTraining Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title GAS CONDITIONING & PROCESSING Training Duration 5 days Training Venue and Dates Gas Conditioning & Processing 5 07 11 April, 2019 $4,000 Dubai, UAE Trainings will be conducted in any of
More informationHSE246 Confined Space Safety
HSE246 Confined Space Safety H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: This Confined Space Safety course will allow the entrant, attendant,
More informationHSE159 Safe Work Practices for Confined Space Entry
HSE159 Safe Work Practices for Confined Space Entry H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: The hazards of confined spaces are not
More informationTraining Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS
Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS Training Duration 5 days Training Venue and Dates Identify Operational Upsets, Review & Validate in Oil & Chemical
More informationDE149. Wireline Servicing, Fishing Job for Completion and Workover
DE149 Wireline Servicing, Fishing Job for Completion and Workover H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: This five-day course is
More informationTraining Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title CONTROL & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates Control & Safety Relief Valves 5 06-10 May, 2018 $4,000 Dubai, UAE Trainings will be conducted in any of
More informationVALVES OPERATION, MAINTENANCE & TROUBLESHOOTING
Training Title VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING Training Duration 5 days Training Venue and Dates Valves operation, Maintenance & Troubleshooting 5 02-06 Dec $3,750 Dubai, UAE In any of
More informationExperimental Verification of Integrated Pressure Suppression Systems in Fusion Reactors at In-Vessel Loss-of -Coolant Events
Experimental Verification of Integrated Pressure Suppression Systems in Fusion Reactors at In-Vessel Loss-of -Coolant Events K. Takase 1), H. Akimoto 1) 1) Japan Atomic Energy Research Institute (JAERI),
More informationDISTILLATION POINTS TO REMEMBER
DISTILLATION POINTS TO REMEMBER 1. Distillation columns carry out physical separation of liquid chemical components from a mixture by a. A combination of transfer of heat energy (to vaporize lighter components)
More informationMOE101 HLO & Offshore Helideck Safety
MOE101 HLO & Offshore Helideck Safety H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: Helicopters play a major role in the offshore environment.
More information1 SE/P-02. Experimental and Analytical Studies on Thermal-Hydraulic Performance of a Vacuum Vessel Pressure Suppression System in ITER
1 SE/P-2 Experimental and Analytical Studies on Thermal-Hydraulic Performance of a Vacuum Vessel Pressure Suppression System in ITER K. Takase 1), H. Akimoto 1) 1) Japan Atomic Energy Research Institute,
More informationLiquid -Vapor. Contacting columns
Liquid -Vapor * Contacting columns Distillation Column Design The design of a distillation column can be divided into the following steps: 1. Specify the degree of separation required: set product specifications.
More informationInstallation, Operation and Maintenance Instructions for Pacific PA Non-Storage Heat Exchanger
OM008 Installation, Operation and Maintenance Instructions for Pacific PA Non-Storage Heat Exchanger The operating and maintenance instructions contained within this package are for Pacific water/water
More informationProfile LFR-43 HELENA ITALY. Italian National Agency for New Technologies, Energy and Sustainable Economic Development, C.R. ENEA Brasimone, Italy
Profile LFR-43 HELENA ITALY GENERAL INFORMATION NAME OF THE FACILITY ACRONYM COOLANT(S) OF THE FACILITY LOCATION (address): OPERATOR CONTACT PERSON (name, address, institute, function, telephone, email):
More informationPaper #: POWER
Proceedings of POWER2008 ASME Power 2008 July 22-24, 2008, Orlando, Florida, USA Paper #: POWER2008-60061 THE USE OF AN EDDY CURRENT INSPECTION OF BRASS TUBES IN A SURFACE CONDENSER TO PROVIDE A CONDITION
More informationTABLE OF CONTENT
Page : 1 of 22 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia S) TABLE OF CONTENT SCOPE 2 VESSELS
More informationUPGRADE AND EXPERIMENTAL TESTS IN THE HLM FACILITY NACIE-UP WITH A PROTOTYPICAL THERMAL FLOW METER
Sigla identificazione 1 18 Titolo UPGRADE AND EXPERIMENTA TESTS IN THE HM FACIITY NACIE-UP WITH A PROTOTYPICA THERMA FOW METER Descrittori Tipologia del documento: Collocazione contrattuale: Argomenti
More informationHTR Systems and Components
IAEA Course on HTR Technology Beijing, 22-26.October 2012 HTR Systems and Components Dr. Gerd Brinkmann Dieter Vanvor AREVA NP GMBH Henry-Dunant-Strasse 50 91058 Erlangen phone +49 9131 900 96840/95821
More informationGM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
More informationInstallation, Operation and Maintenance Instructions for Chemical Dosing Pots
OM018 Installation, Operation and Maintenance Instructions for Chemical Dosing Pots The operating and maintenance instructions contained within this package are for standard Chemical Dosing Pots. The CDP
More informationKörting Liquid Jet Vacuum Ejectors
Körting iquid Jet Vacuum Ejectors Körting iquid Jet Vacuum Ejectors iquid jet vacuum ejectors convey and compress gases or vapours with the aid of a liquid motive fluid. During this action vapours - corresponding
More informationTube rupture in a natural gas heater
Tube rupture in a natural gas heater Dynamic simulation supports the use of a pressure safety valve over a rupture disk in the event of a tube rupture HARRY Z HA and PATRICK STANG Fluor Canada Ltd A fast
More informationBASICS of MAINTENANCE and TROUBLESHOOTING of VACUUM DIFFUSION PUMPS
BASICS of MAINTENANCE and TROUBLESHOOTING of VACUUM DIFFUSION PUMPS Topics for Discussion Diffusion Pump Basics Maintenance Troubleshooting Topics for Discussion Diffusion Pump Fundamentals Maintenance
More informationEarlier Lecture. In the earlier lecture, we have seen Kapitza & Heylandt systems which are the modifications of the Claude System.
17 1 Earlier Lecture In the earlier lecture, we have seen Kapitza & Heylandt systems which are the modifications of the Claude System. Collins system is an extension of the Claude system to reach lower
More informationDocument No: NGSB/SHO-001
Page : 1 of 13 COURSE TITLE : SAFETY AND HEALTH OFFICER (JKKP IS 127/438/3-84) COURSE CODE : SHO COURSE DURATION : 22 DAYS COURSE LEVEL : BASIC COURSE CATEGORY : COMPETENCY COURSE FEE : RM 3800.00 EXAMINATION
More informationRestriction Orifice. Single or Multi Stage Orifice to. Reduce Pressure or. Limit the Flow Rate
Restriction Orifice Single or Multi Stage Orifice to Reduce Pressure or Limit the Flow Rate Restriction Orifice Plates Series ROPS Principle Restriction Orifice Plates and Critical Flow Devices and their
More informationANALYSIS OF HEAT TRANSFER THROUGH EXTERNAL FINS USING CFD TOOL
ANALYSIS OF HEAT TRANSFER THROUGH EXTERNAL FINS USING CFD TOOL B. Usha Rani 1 and M.E Thermal 2 1,2 Asst.Professor, Dadi Institute of Engineering and Technology, India Abstract-The rate of heat transfer
More informationInstrumentation & Data Acquisition Systems
Instrumentation & Data Acquisition Systems Section 3 -Level Robert W. Harrison, PE Bob@TheHarrisonHouse.com Made in USA 1 Level Section Question Which level measuring technology is the best solution when
More informationElimination of Oil Residual inside the Copper Pipe Using Ladder Technique
Engineering, 2013, 5, 8-15 http://dx.doi.org/10.4236/eng.2013.51002 Published Online January 2013 (http://www.scirp.org/journal/eng) Elimination of Oil Residual inside the Copper Pipe Using Ladder Technique
More informationInstallation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels
OM003 Installation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels The operating and maintenance instructions contained within this package are for standard storage vessels
More informationSample Coolers. Water Steam Process. The largest selection of models offered by any manufacturer.
Sample Coolers Water Steam Process The largest selection of models offered by any manufacturer More than 85 Years of Sampling Experience Cool, Heat or Condense Any Sample Sentry has more types of sample
More information2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome
More informationOperational Settings:
instrucalc features more than 70 routines associated with control valves, ISO flow elements, relief valves and rupture disks, and calculates process data at flow conditions for a comprehensive range of
More informationN2 Blanketing Valve DST100 / DST200 TYPE INSTRUCTION MANUAL CONTENTS K.S.P.C. General Description Operation. Installation Maintenance
DST100 / DST200 TYPE N2 Blanketing Valve INSTRUCTION MANUAL CONTENTS General Description Operation Installation Maintenance K.S.P.C 488-1 Wolha-ro, Tongjin-eup, Gimpo-si, Gyeonggi-Do, Korea Tel : +82-31-998-3825~7
More informationTraining Fees 3,400 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title DISTRIBUTED CONTROL SYSTEMS (DCS) 5 days Training Venue and Dates DISTRIBUTED CONTROL SYSTEMS (DCS) Trainings will be conducted in any of the 5 star hotels. 5 22-26 Oct. 2017 $3400 Dubai,
More informationCoriolis Mass Flow Meter
Coriolis Mass Flow Meter TMFW Series Mini Type Coriolis Mass Flow Meter Xi an Tosilon Automation Co., Ltd No.299, Daqing Rd, Lianhu District, Xi'an Shaanxi, China Tel: +86-29-8823 8550 info@tosilon.com;
More informationThe API states the following about tube rupture for a shell-and-tube heat exchangers:
Tutorial This tutorial describes the theory and modeling process of a tube rupture event using the special element type Rupture element in BOSfluids. It covers the algorithm BOSfluids uses to model the
More informationBacked By Over 80 Years of Sampling Experience
sample coolers largest selection of models offered by any manufacturer water steam process Backed By Over 80 Years of Sampling Experience Cool, Heat or Condense Any Sample Sentry has more types of sample
More informationInerted Vessels: Preventing Hazards Caused by Gas Buoyancy
Inerted Vessels: Preventing Hazards Caused by Gas Buoyancy 2008 Mary Kay O Connor O Process Safety Center International Symposium College Station, Texas Tuesday, October 28, 2008 presented by Russell A.
More informationRevision 2013 Vacuum Technology 1-3 day Good Vacuum Practice 1 Day Course Outline
Revision 2013 Vacuum Technology 1-3 day Good Vacuum Practice 1 Day Course Outline This training course outline is intended to cover the following: Introduction to vacuum Measurement Lubricated rotary pumps
More informationVisual Observation of Nucleate Boiling and Sliding Phenomena of Boiling Bubbles on a Horizontal Tube Heater
Proceedings of the 2 nd World Congress on Mechanical, Chemical, and Material Engineering (MCM'16) Budapest, Hungary August 22 23, 216 Paper No. HTFF 146 DOI:.11159/htff16.146 Visual Observation of Nucleate
More informationPractical Guide. By Steven T. Taylor, P.E., Member ASHRAE
ractical Guide The following article was published in ASHRAE Journal, March 2003. Copyright 2003 American Society of Heating, Refrigerating and Air- Conditioning Engineers, Inc. It is presented for educational
More informationInstallation, Operation and Maintenance Instructions Buffer Vessel OM006
Installation, Operation and Maintenance Instructions Buffer Vessel OM006 Calorifiers Heat Exchangers Pressurisation Units Sales Tel: 01457 835700 Sales Fax: 01457 832700 E-mail: sales@gmsthermal.co.uk
More informationMechanical Seal Piping Plans
Mechanical Seal Piping Plans Single Seals plans 01, 02, 11, 13, 14, 21, 23, 31, 32, 41 Dual Seals plans 52, 53A, 53B, 53C, 54 Quench Seals plans 62, 65 Gas Seals plans 72, 74, 75, 76 Mechanical Seal Piping
More informationStructure of Mechanically Agitated Gas-Liquid Contactors
Structure of Mechanically Agitated Gas-Liquid Contactors 5 2 Structure of Mechanically Agitated Gas-Liquid Contactors 2.1 The vessel geometry The most commonly adopted geometry of a stirred gas-liquid
More informationFitness for Service Assessment of Ageing Pressure Vessel Experiencing External Corrosion: A Case Study
The International Journal Of Engineering And Science (IJES) Volume 6 Issue 2 Pages PP 12-16 2017 ISSN (e): 2319 1813 ISSN (p): 2319 1805 Fitness for Service Assessment of Ageing Pressure Vessel Experiencing
More informationFlow and Mixing in the Liquid between Bubbles
Excerpt from the Proceedings of the COMSOL Conference 2009 Boston Flow and Mixing in the Liquid between Bubbles Bruce A. Finlayson, Professor Emeritus of Chemical Engineering Department of Chemical Engineering,
More informationPressure measurement. Pressure gauges
Pressure gauge Pressure measurement There are four types of pressure measurements: Measurement of absolute pressure : Measurements are made with respect to absolute pressure, for example as with atmospheric
More informationScrew Gas Compressors & Dry Gas Seals Applications. Singapore, Mandarin Orchard Singapore. Training Course : Training Course For One Week In
Training Course : Screw Gas Compressors & Dry Gas Seals Applications Training Course For One Week In Singapore, Mandarin Orchard Singapore Which Be Held As Under Details : Tel. : 00965 22610021 99600277,
More informationWell Testing Operations. Turkey, Istanbul, Points Taksim Hotel. Training Course : One Weeks Training Course In. As Under Details :
Training Course : Well Testing Operations One Weeks Training Course In Turkey, Istanbul, Points Taksim Hotel As Under Details : Mohammad Issa External Training Coordinator 0096597535000 Tel. : 00965 22610021
More informationMECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES
Training Title MECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates REF Mechanical Equipments:
More informationTransient Analyses In Relief Systems
Transient Analyses In Relief Systems Dirk Deboer, Brady Haneman and Quoc-Khanh Tran Kaiser Engineers Pty Ltd ABSTRACT Analyses of pressure relief systems are concerned with transient process disturbances
More informationVacuum Systems and Cryogenics for Integrated Circuit Fabrication Technology 01
INAOE. Tonantzintla, Mexico. 2010-06-23. June 23 rd, 2010 Vacuum Systems and Cryogenics for Integrated Circuit Fabrication Technology 01 Joel Molina INAOE Microelectronics Group jmolina@inaoep.mx 1 Vacuum
More informationExhibit 4. Determination of Static Pressure Performance of the Healy Clean Air Separator (Executive Orders VR-201-N and VR-202-N)
1 APPLICABILITY Exhibit 4 Determination of Static Pressure Performance of the Healy Clean Air Separator (Executive Orders VR-201-N and VR-202-N) Definitions common to all certification and test procedures
More informationTS1. Ultrasonic Tank Sender. Installation and Operating Instructions. For TS1 Firmware v3.8. Page 1 INST-TS1-V13 18/11/10
TS1 Ultrasonic Tank Sender Installation and Operating Instructions For TS1 Firmware v3.8 Page 1 Table of Contents 1. FEATURES... 3 2. SPECIFICATIONS... 3 3. DIMENSIONS... 4 4. MOUNTING AND INSTALLATION...
More informationMicro Channel Recuperator for a Reverse Brayton Cycle Cryocooler
Micro Channel Recuperator for a Reverse Brayton Cycle Cryocooler C. Becnel, J. Lagrone, and K. Kelly Mezzo Technologies Baton Rouge, LA USA 70806 ABSTRACT The Missile Defense Agency has supported a research
More information2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
More informationCOMPUTATIONAL FLOW MODEL OF WESTFALL'S LEADING TAB FLOW CONDITIONER AGM-09-R-08 Rev. B. By Kimbal A. Hall, PE
COMPUTATIONAL FLOW MODEL OF WESTFALL'S LEADING TAB FLOW CONDITIONER AGM-09-R-08 Rev. B By Kimbal A. Hall, PE Submitted to: WESTFALL MANUFACTURING COMPANY September 2009 ALDEN RESEARCH LABORATORY, INC.
More informationInstallation, Operation and Maintenance Instructions for Mild Steel Buffer Vessel
OM006 Installation, Operation and Maintenance Instructions for Mild Steel Buffer Vessel The operating and maintenance instructions contained within this package are for standard mild steel buffer vessels
More informationThe Discussion of this exercise covers the following points:
Exercise 3-2 Orifice Plates EXERCISE OBJECTIVE In this exercise, you will study how differential pressure flowmeters operate. You will describe the relationship between the flow rate and the pressure drop
More informationADVANCED CONTROL VALVE AND ACTUATOR: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance.
Training Title ADVANCED CONTROL VALVE AND ACTUATOR: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance. Training Duration 5 days Training Dates
More informationW WEST COAST FEVER ASSISTANT COACH / ACADEMY HIGH PERFORMANCE COACH
Employer Reports to Department Location Position Overview Core Responsibilities West Coast Fever Netball Club Executive Officer - West Coast Fever and West Coast Fever Head Coach West Coast Fever Based
More informationNotice for Pressure Special Equipment Manufacture Licensing
AQSIQ Notice No.151 (2012) Notice for Pressure Special Equipment Manufacture Licensing To further enhance the implementation of the manufacture licensing system to imported pressure special equipment,
More informationSRI Jigger Tubes System
SRI Jigger Tubes System Design, Installation and Commissioning Manual (Abbreviated Version) INDEX This manual details how the SRI Jigger Tubes System can be tailored to suit the needs of a variety of vacuum
More information2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
E. INTERPRETATION OF THE ESSENTIAL SAFETY REQUIREMENTS ON DESIGN Guideline E-01 Guideline related to: Annex I Section 2.2.2; Annex I Section 2.2.4 How should the condition related to the experimental design
More informationDrilling Efficiency Utilizing Coriolis Flow Technology
Session 12: Drilling Efficiency Utilizing Coriolis Flow Technology Clement Cabanayan Emerson Process Management Abstract Continuous, accurate and reliable measurement of drilling fluid volumes and densities
More informationPressure Measurement Unit HEMP
Pressure Measurement Unit HEMP Engineering and Technical Teaching Equipment INTRODUCTION Pressure measurements are the most important measurements in industry; especially in continuous processes industries,
More informationCPE562 Chemical Process Control HOMEWORK #1 PROCESS & INSTRUMENTATION DIAGRAM
Faculty of Chemical Engineering CPE562 Chemical Process Control HOMEWORK #1 PROCESS & INSTRUMENTATION DIAGRAM SUBMISSION DATE: 1 OCT. 2012 Question 1 Name the following equipments based on standard P&ID
More informationMechanical Seal Piping Plans
Mechanical Seal Piping Plans Single Seals plans 01, 02, 03, 11, 13, 14, 21, 23, 31, 32, 41 Dual Seals plans 52, 53A, 53B, 53C, 54, 55 Quench Seals plans 62, 65A, 65B, 66A, 66B Gas Seals plans 72, 74, 75,
More informationPhysics Demos for Open House
Physics Demos for Open House Ten bonus points will be granted to students who will come in and do demos for the Open House. Students will need to sign up with Boom prior the Open House date. We shall need
More informationDECLARATION OF INCORPORATION
AESSEAL (MCK) Ltd. Systems Division 139a Hillsborough Old Road Lisburn Northern Ireland BT27 5QE Tel +44 (0) 2892 669966 Fax +44 (0) 2892 669977 When selecting and installing suitable Barrier Fluid System
More informationProcedure of Xenon Transfer
Procedure of Xenon Transfer Feng Zhou,MIT CC: Martina Green February 28, 2005 In this write up, we discuss the procedure on how to transfer xenon to a designed gas storage vessel that supplies xenon to
More informationLEAP CO 2 Laboratory CO 2 mixtures test facility
LEAP CO 2 Laboratory CO 2 mixtures test facility THE PROJECT AIM CO 2 flows made available by several capture techniques are contaminated with impurities and this affects the design and operations of the
More informationAtmospheric relief valve type 1100 Installation and maintenance instructions
SAPAG 1. Description Sapag atmospheric relief valves type 1100 have been selected for installation because of their performance features, reliability and ease of maintenance. They are designed to protect
More informationBy: Eng. Ahmed Deyab Fares - Mobile:
Distillation Column 1 Workshop Separation of light products is present in any Hydrocarbons operations. In this module, a column will be modeled to separate Light and heavy components from each other using
More informationENS-200 Energy saving trainer
ENS-200 Energy saving trainer Find out about the essential aspects of energy efficiency in compressed air installations Save money Put it into practice Take care of the environment Get training www.smctraining.com
More informationFlow transients in multiphase pipelines
Flow transients in multiphase pipelines David Wiszniewski School of Mechanical Engineering, University of Western Australia Prof. Ole Jørgen Nydal Multiphase Flow Laboratory, Norwegian University of Science
More informationPSM TRAINING COURSES. Courses can be conducted in multi-languages
Courses can be conducted in multi-languages One set of hardcopy course notes will be sent to client for printing and distribution to course participants. The courses will be held at the client s training
More informationWP2 Fire test for toxicity of fire effluents
Pagina 3 di 89 TRA SFEU VTT 22.6.2009 v.2 WP2 Fire test for toxicity of fire effluents Task 2.1.2 Development of small-scale test method for fire effluents Step 1: Use of modeling Plans according to DoW:
More informationPipe-Away Pressure Vacuum Vent /Conservation Vent
R R Pressure Vacuum Vent / End of Line Conservation Vent Flame Arrester with Pressure Vacuum Vent Pipe Away Pressure Vacuum Vent / Conservation Vent Vacuum Relief Vent Pressure Emergency Vent Free Vents
More informationPressure Equipment Directive (PED) 97/23/EC Page 033 of 124
Pressure Equipment Directive (PED) 97/23/EC Page 033 of 124 13.7 Pressure Equipment Directive (PED) 97/23/EC 1 The Pressure Equipment Directive (PED) 97/23/EC applies to the design, manufacturing and conformity
More informationSPIROVENT VACUUM DEGASSERS
SPIROVENT VACUUM DEGASSERS S P I R O V E N T A I R S U P E R I O R FLUID AND GAS There are always a certain amount of gasses in a fluid, dependent on pressure and temperature. The British physicist William
More informationThird measurement MEASUREMENT OF PRESSURE
1. Pressure gauges using liquids Third measurement MEASUREMENT OF PRESSURE U tube manometers are the simplest instruments to measure pressure with. In Fig.22 there can be seen three kinds of U tube manometers
More informationAcoustic Pulse Reflectometry Brings an End to Tube Inspection Sampling By Dr. Noam Amir, Chief Technology Officer, AcousticEye
SINCE2011 Singapore International NDT Conference & Exhibition, 3-4 November 2011 Acoustic Pulse Reflectometry Brings an End to Tube Inspection Sampling By Dr. Noam Amir, Chief Technology Officer, AcousticEye
More informationArmfield Distillation Column Operation Guidelines
Armfield Distillation Column Operation Guidelines 11-2016 R.Cox Safety SAFETY GLASSES ARE REQUIRED WHEN OPERATING THE DISTILLATION COLUMN Wear gloves when mixing alcohol feedstock The column will become
More informationTIGHTNESS. Glass sealing Thanks to our glass-sealing technology, ODU products can meet the most demanding tightness requirements.
TIGHTNESS Glass sealing Thanks to our glass-sealing technology, ODU products can meet the most demanding tightness requirements. ODU has the necessary expertise for developing and manufacturing connectors
More informationABB measurement & analytics data sheet. JAA, JAF and JAG Pneumatic indicating controllers
ABB measurement & analytics data sheet JAA, JAF and JAG Pneumatic indicating controllers 2 JA A, JAF an d JAG P N EUMATI C I ndicating cont rollers DS/JAx_DBT_DTE-EN Rev. H Measurement made easy Engineered
More informationRelief Systems. 11/6/ Fall
Relief Systems 1 Relief Scenarios o A single relief event requires a particulate vent area and valve size o Relief scenarios are determined based on a PHA o For each scenario, a vent area is calculated
More informationGuide for Evaluating Your Hose Assembly Supplier
Guide for Evaluating Your Hose Assembly Supplier Supplier Evaluation Checklist, and How to Clearly Define Application Requirements Safe, reliable hose assemblies require appropriate specification work
More information