A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A )
|
|
- Ambrose Wade
- 5 years ago
- Views:
Transcription
1 A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 40S/40E/40M An Automotive Technology Course
2
3 : A u t o m o t i v e E l e c t r i c a l S y s t e m s ( 1 2 A ) 4 0 S / 4 0 E / 4 0 M Course Description A student wanting to develop skills in the automotive industry must have knowledge of the basic principles of automotive electrical systems. The student will understand the principles of electricity and electronics as they relate to automotive systems. The student will be able to diagnose, service, and repair automotive electrical circuits and components. Goal 1: Describe and apply appropriate health and safety practices. GLO 1.1: Describe and apply appropriate health and safety practices. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Safely perform battery service. Demonstrate awareness of the principles of Workplace Hazardous Materials Information Systems (WHMIS). Identify the safety requirements as they apply to WHMIS. (A2.9) (Level 1) Describe the purpose of Material Safety Data Sheets (MSDS). Demonstrate the ability to follow safety information on supplier labels. Follow safe practices and procedures for facilities, processes, materials, tools, and equipment used in an automotive facility. Locate first aid and eyewash station. Recognize, report, and control hazards (e.g., electrical, ergonomic, material handling, chemicals, and spills). (A2.6) (Level 1) SLO 12A Identify and control hazards. (A2.10) (Level 1) SLO 12A SLO 12A Identify the process for reporting injuries. Identify ergonomically correct procedures to avoid injury (e.g., stress, strain). (A2.5) (Level 1) SLO 12A Describe hybrid vehicle safety hazards. (G1.2) (Level 1) SLO 12A SLO 12A Describe the importance of using Personal Protective Equipment (PPE), and identify PPE and procedures related to PPE. (A2.2) (TSA 16) Outline the safety principles for working on and around electrical or energized equipment. (A2.3) (TSA 18) 8700: Automotive Electrical Systems (12A) 3
4 SLO 12A SLO 12A Identify fire safety, and outline workplace fire safety principles. (A4.4) (TSA 19) Identify the hazards in confined spaces and the preparation needed to work in them. (A2.7) (TSA 20) SLO 12A Identify safety and health requirements. (A2.1) (Level 1) SLO 12A Identify First Aid/CPR. (A2.8) (Level 1) SLO 12A SLO 12A SLO 12A SLO 12A Identify hazards, and describe safe work practices pertaining to the use of tools and equipment. (A3.1) (Level 1) Identify hazards and describe safe work practices pertaining to hoisting and lifting. (A4.2) (Level 1) Create and maintain a safe and organized working environment. Identify hazards, and describe safe work practices pertaining to electrical and electronic components. (D1.2) (Level 1) GLO 1.2: Demonstrate awareness of safety as it pertains to the Trade Safety Awareness Manual. No applicable SLOs. Goal 2: Select, use, and manage tools, equipment, materials, and consumables. GLO 2.1: Select, use, and manage tools and equipment. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Perform circuit testing using basic electrical testing equipment. Demonstrate the use of tools used to complete electrical repairs. Demonstrate the safe use of charging, starting, and battery testing equipment. Identify types of scan tools and digital voltage ohmmeters (DVOM), and describe their applications. (A3.7) (Level 1) Identify types of tools and equipment used to test and charge batteries, and describe/demonstrate their applications and procedures for use. (D1.6) (Level 1) Identify tools and equipment used to test circuits and components, and describe/demonstrate their applications and procedures for use. (D1.11) (Level 1) : Automotive Electrical Systems (12A)
5 GLO 2.2: Select, use, and manage materials and consumables. No applicable SLOs. GLO 2.3: Demonstrate welding and cutting. No applicable SLOs. Goal 3: Describe, inspect, diagnose, service, and repair automotive components and systems. GLO 3.1: Describe automotive components and systems. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Describe the characteristics of different circuit types. Describe the purpose and operation of the starter motor. Describe the starting system components. Describe the components of the starter motor. Describe the purpose and operation of automotive charging systems. Describe the components of automotive charging systems. Describe electrical protection devices. Describe the purpose of automotive wiring diagrams. Define terminology associated with electrical, electronic, and magnetic principles. (D1.1) (Level 1) SLO 12A Explain basic electrical theory. (D1.4) (Level 1) SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Explain Ohm's law and its applications to electrical circuits. (D1.5) (Level 1) Identify types of batteries and describe their characteristics. (D1.7) (Level 1) Identify types of wire, and describe their characteristics, composition, and applications. (D1.8) (Level 1) Identify types of electrical components, and describe their purpose and operation. (D1.9) (Level 1) Identify types of electronic components, and describe their purpose and operation. (D1.10) (Level 1) Identify types of electrical/electronic systems, and describe their components and operation. (F1.6) (Level 1) GLO 3.2: Inspect and diagnose automotive components and systems. SLO 12A SLO 12A Inspect and diagnose batteries. Inspect and diagnose starting systems. 8700: Automotive Electrical Systems (12A) 5
6 SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Inspect and diagnose charging systems. Diagnose wiring harnesses. Diagnose electrical protection devices. Inspect and diagnose automotive electrical systems. Calculate circuit values using Ohm s law. Describe and demonstrate the procedures used to diagnose circuits and components. (D1.12) (Level 1) GLO 3.3: Service and repair automotive components and systems. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Service and/or replace batteries. Service and repair starting systems. Service and repair charging systems. Repair wiring harnesses. Service and repair electrical accessory components. Service and/or replace electrical protection devices. Measure and interpret electrical values in automotive circuits. Perform repairs to electrical accessories and circuits. Diagnose and service wiring harnesses. Diagnose and service electrical accessory components. Diagnose and service electrical protection devices. Retrieve and interpret wiring diagrams (e.g., colour coding systems, wire size). Identify methods of wire repair, and describe/ demonstrate their associated procedures. (D1.13) (Level 1) Describe the procedures used to repair and/or replace circuits and components. (D1.14) (Level 1) Goal 4: Describe and apply the transferable cross-curricular knowledge and skills. GLO 4.1: Demonstrate the application of information and communication technologies. SLO 12A Demonstrate the use of automotive service information retrieval systems unique to the automotive service and repair industry (e.g., Mitchell On Demand, All Data, IATN) : Automotive Electrical Systems (12A)
7 GLO 4.2: Read, interpret, and communicate information. SLO 12A Interpret information pertaining to electrical and electronic components found on drawings and specifications. (D1.3) (Level 1) GLO 4.3: Demonstrate mathematical skills. SLO 12A Describe math anxiety and its remedies. (A7.2) (Level 1) GLO 4.4: Demonstrate skills in the sciences. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Describe atomic structure. Describe electricity. Describe conventional and electron theory. Describe principles of magnetism. Define Ohm s law. Describe the properties of electromagnetism related to automotive components. Goal 5: Demonstrate an understanding of sustainability. GLO 5.1: Demonstrate an understanding of sustainability. SLO 12A Describe and apply efficient materials usage and disposal practices. Goal 6: Follow ethical and legal standards. GLO 6.1: Follow ethical and legal standards. SLO 12A Demonstrate an awareness of liability concerns related to automotive systems and service. Goal 7: Demonstrate employability skills. GLO 7.1: Demonstrate employability skills. SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A SLO 12A Demonstrate problem-solving skills. Demonstrate critical-thinking skills. Demonstrate regular attendance and punctuality. Demonstrate accountability by taking responsibility for their actions. Demonstrate adaptability, initiative, and effort. Demonstrate the ability to accept and follow directions and feedback. 8700: Automotive Electrical Systems (12A) 7
8 SLO 12A SLO 12A SLO 12A Demonstrate teamwork skills. Demonstrate the ability to stay on task and effectively use time in class and shop environments. Communicate respectively and effectively with coworkers and customers. GLO 7.2: Demonstrate an understanding of the business operation of a repair/service facility. No applicable SLOs. Goal 8: Understand educational and career opportunities. GLO 8.1: Understand educational and career opportunities. SLO 12A SLO 12A Demonstrate the skills and resources used to obtain and sustain employment in the automotive service and repair industry. Demonstrate an awareness of specialized occupations in automotive electrical systems. Goal 9: Explore evolution, technological progression, and emerging trends. GLO 9.1: Explore evolution, technological progression, and emerging trends. SLO 12A SLO 12A SLO 12A Demonstrate an understanding of the evolution, technological progression, and emerging trends in automotive electrical systems. Describe emerging technologies related to automotive charging systems. Describe emerging battery technology : Automotive Electrical Systems (12A)
I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 )
8 6 7 3 I n t r o d u c t i o n t o H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 0 ) 20S/20E/20M A Heavy Duty Equipment Technician Course 8 6 7 3 : I n t r o d u c t i o n t o H e a v y
More informationA p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D )
8 7 0 4 A p p l i e d H e a v y D u t y E q u i p m e n t T e c h n o l o g y ( 1 2 D ) 40S/40E/40M A Heavy Duty Equipment Technician Course 8 7 0 4 : A p p l i e d H e a v y D u t y E q u i p m e n t
More informationD a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a )
9 0 3 3 D a m a g e a n a l y s i s a n D s t r u c t u r a l r e p a i r s ( 1 2 a ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 3 : D a m a g e a n a l y s i s a n D s t r
More informationI n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 )
9 0 2 9 I n t r o d u c t I o n t o c o l l I s I o n r e p a I r a n d r e f I n I s h I n g t e c h n o l o g y ( 1 0 ) 20S/20E/20M A Collision Repair and Refinishing Technology Course 9 0 2 9 : I n
More informationW e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B )
9 0 3 4 W e l d - O n a n d B O l t - O n P a n e l R e P l a c e m e n t ( 1 2 B ) 40S/40E/40M A Collision Repair and Refinishing Technology Course 9 0 3 4 : W e l d - O n a n d B O l t - O n P a n e
More informationA p p l i e d C a r p e n t r y ( 1 2 D )
9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 40S/40E/40M A Carpentry Course 9 1 9 4 A p p l i e d C a r p e n t r y ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description In this course, students will
More informationA d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A )
8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d i n g P r o c e s s e s a n d P r o c e d u r e s ( 1 2 A ) 40S/40E/40M A Welding Technology Course 8 4 8 7 A d v a n c e d G M A W ( M I G ) W e l d
More informationB a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C )
8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 30S/30E/30M A Welding Technology Course 8 4 8 6 B a s i c S M A W ( A R C ) P r o c e d u r e s ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course
More informationA u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B )
9 0 3 1 A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1 1 B ) 30S/30E/30M A Collision Repair and Refinishing Technology Course 9 0 3 1 : A u t o m o t i v e m e t A l s A n d W e l d i n g ( 1
More informationB a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B )
8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 30S/30E/30M A Welding Technology Course 8 4 7 4 B a s i c G M A W ( M I G ) P r o c e d u r e s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course
More informationM i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
More informationM e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A )
8 4 1 4 M e t a l D e s i g n / F a b r i c a t i o n & O x y - A c e t y l e n e P r o c e d u r e s ( 1 1 A ) 30S/30E/30M A Welding Technology Course 8 4 1 4 M e t a l D e s i g n / F a b r i c a t
More informationC N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
More informationA i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
More informationC o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a
9 0 9 7 C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 30S/30E/30M An Interactive Digital Media Course 9 0 9 7 : C o d i n g f o r i n t e r a C t i v e d i g i t a l M e d i a 3 0 S
More informationV e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C )
8 7 9 4 V e g e t a b l e s, F u n g i, S t a r c h e s, a n d F a r i n a c e o u s P r o d u c t s ( 1 1 C ) 30S/30E/30M A Culinary Arts Course 8 7 9 4 : V e g e t a b l e s, F u n g i, S t a r c h
More informationF u n d a m e n t a l s o f G r a p h i c D e s i g n
9 1 3 6 F u n d a m e n t a l s o f G r a p h i c D e s i g n 20S/20E/20M A Graphic Design Course 9 1 3 6 : F u n d a m e n t a l s o f G r a p h i c D e s i g n 2 0 S / 2 0 E / 2 0 M Course Description
More informationP a t i s s e r i e a n d B a k i n g ( 1 1 B )
8 7 9 3 P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 30S/30E/30M A Culinary Arts Course 8 7 9 3 : P a t i s s e r i e a n d B a k i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This course
More informationE x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 )
8 7 6 8 E x p l o r a t i o n o f J e w e l l e r y / M e t a l s m i t h i n g ( 9 ) 15S/15E/15M 10S/10E/10M A Jewellery/Metalsmithing Course 8 7 6 8 : E x p l o r a t i o n o f J e w e l l e r y / M
More informationGrades 9 to 12 Heavy Duty Equipment Technician. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Heavy Duty Equipment Technician Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 H e a v y D u t y E q u i p m e n t T e c h n i c i a n Manitoba Technical-Vocational
More informationP r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a
9 1 0 0 P r o j e c t M a n a g e M e n t f o r I n t e r a c t I v e D I g I t a l M e D I a 40S/40E/40M An Interactive Digital Media Course 9 1 0 0 : P r o j e c t M a n a g e M e n t f o r I n t e
More informationB r e a k f a s t a n d D a i r y ( 1 2 B )
8 7 9 6 B r e a k f a s t a n d D a i r y ( 1 2 B ) 40S/40E/40M A Culinary Arts Course 8 7 9 6 : B r e a k f a s t a n d D a i r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This course is intended
More informationG r a d e 1 2 D A d v a n c e d M i l l w o r k
G r a d e 1 2 D A d v a n c e d M i l l w o r k G r a d e 1 2 D : A d v a n c e d M i l l w o r k Course Description Carpentry 12D: Advanced Millwork is intended for students transitioning from the carpentry
More informationB a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C )
8 3 1 4 B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C ) 20S/20E/20M A Hairstyling Course 8 3 1 4 : B a s i c H a i r c u t t i n g a n d T h e r m a l S t y l i n g ( 1 0 C
More informationI n t e r m e d i a t e H a i r c u t t i n g ( 1 1 A ) 30S/30E/30M. a n d B a r b e r i n g T e c h n i q u e s. A Hairstyling Course
8 3 1 6 I n t e r m e d i a t e H a i r c u t t i n g a n d B a r b e r i n g T e c h n i q u e s ( 1 1 A ) 30S/30E/30M A Hairstyling Course 8 3 1 6 : I n t e r m e d i a t e H a i r c u t t i n g a n
More informationK n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A )
9 1 2 6 K n i t w e a r D e s i g n a n d C o n s t r u c t i o n ( 1 1 A ) 30S/30E/30M A Fashion Design and Technology Course 9 1 2 6 : K n i t w e a r D e s i g n a n d C o n s t r u c t i o n 3 0 S
More informationF o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B )
9 1 3 1 F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o n ( 1 2 B ) 40S/40E/40M A Fashion Design and Technology Course 9 1 3 1 : F o r m a l W e a r D e s i g n a n d C o n s t r u c t i o
More informationR e l a t e d S a l o n S e r v i c e s ( 1 0 D )
8 3 1 5 R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 20S/20E/20M A Hairstyling Course 8 3 1 5 : R e l a t e d S a l o n S e r v i c e s ( 1 0 D ) 2 0 S / 2 0 E / 2 0 M Course Description Curriculum
More informationE x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 )
8 2 3 1 E x p l o r a t i o n o f B a k i n g a n d P a s t r y A r t s ( 9 ) 15S/15E/15M 10S/10E/10M A Baking and Pastry Arts Course 8 2 3 1: E x p l o r a t i o n o f B a k i n g a n d P a s t r y A
More informationM o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B )
8 3 7 4 M o d e r n a n d C l a s s i c D e s s e r t s, a n d P l a t i n g T e c h n i q u e s ( 1 2 B ) 40S/40E/40M A Baking and Pastry Arts Course 8 3 7 4 : M o d e r n a n d C l a s s i c D e s s
More informationS p a S e r v i c e s ( 1 2 D )
9 0 7 8 S p a S e r v i c e s ( 1 2 D ) 40S/40E/40M An Esthetics Course 9 0 7 8 : S p a S e r v i c e s (1 2 D) 4 0 S / 4 0 E / 4 0 M Course Description The emphasis in this course is on aromatherapy,
More informationY e a s t - D o u g h P r o d u c t s ( 1 1 B )
8 3 3 9 Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 3 9 : Y e a s t - D o u g h P r o d u c t s ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description This
More informationC a k e s, F i l l i n g s, I c i n g s,
8 3 5 8 C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a t i o n s ( 1 1 C ) 30S/30E/30M A Baking and Pastry Arts Course 8 3 5 8 : C a k e s, F i l l i n g s, I c i n g s, a n d D e c o r a
More informationC l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 7 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
More informationC l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course
0 4 8 6 C l o t h i n g a n d T e x t i l e s ( 8 ) A Middle Years Human Ecology Course Human Ecology Clothing & Clothing & Textiles Family Family Studies Studies the progression of Home Economics & Food
More informationNOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD Based on the CCDA for the Occupation Harmonization of Recommendations and the Interprovincial Program Guide Level 1 in September 2017 (pg. 12 for Program
More informationhttps://w05.dealerconnect.chrysler.com/service/mds2002/serviceinfo/en_us/81689ac0.htm... *ACTUATOR CIRCUIT TEST DIAGNOSTICS (DUAL-ZONE)
Page 1 of 14 *ACTUATOR CIRCUIT TEST DIAGNOSTICS (DUAL-ZONE) Page 2 of 14 For a complete wiring diagram Refer to Section 8W. Theory of Operation By running the Actuator Circuit Test, the A/C Heater Control
More informationCURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1
CURRICULUM ASSESSMENT CHECKLIST: MOTOR VEHICLE BODY REPAIRER - LEVEL 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Motor Vehicle
More informationCollision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
More informationPOWERTRAIN CONTROL MODULE PIN IDENTIFICATION & VOLTAGE CHARTS > AXIOM 3.5L, PASSPORT, RODEO & RODEO SPORT 3.2L
ENGINE CONTROLS - PIN VOLTAGE CHARTS INTRODUCTION 2002 Isuzu Axiom 3.5L Eng Base Pin voltage (value) charts are used for diagnosing intermittent symptoms and faults that are unable to be resolved during
More informationSAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
More informationOHSISA TRAINING COURSE FOR WHO? DETAILS & INFORMATION
The OHS Institute of South Africa offers a full range of consulting services pertaining to Safety, Health, Environment, Risk, and Quality (SHERQ) for all sectors of industry. This includes a full range
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
More informationName Phone Logo
External Assessment Specifications Document Curriculum Code Qualification Title NQF Level QCTO 653401000 Occupational Certificate: Mechanic Bicycle 4 Name Email Phone Logo Assessment Quality Partner Wholesale
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationSAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
More informationONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
More informationCourse outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
More informationSPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationOverview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations
Overview This standard is about joining materials correctly and effectively using Metal Inert Gas (MIG) Brazing techniques and procedures. 1 Performance criteria You must be able to: 1. use the appropriate
More informationCourse Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
More informationGOLDER RANCH FIRE DISTRICT EMPLOYEE JOB DESCRIPTION
GOLDER RANCH FIRE DISTRICT EMPLOYEE JOB DESCRIPTION Position / Rank: Fleet Maintenance Technician II Reports To: Lead Fleet Maintenance Technician Supervises: Non-Supervisory Position FLSA Code: Non-Exempt
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationJEFFERSON COLLEGE PAINT I
JEFFERSON COLLEGE COURSE SYLLABUS AUT 230 PAINT I 3 Credit Hours Prepared by: Brenda Russell October 15, 2007 Career & Technical Education Dr. John R. Keck, Dean Brenda Russell, Associate Dean AUT I. CATALOG
More informationHandling Cleaning Chemicals Safely in the Work Place
Handling Cleaning Chemicals Safely in the Work Place We all use cleaning chemicals; both at work and at home. It is important that we all understand the potential risks, and where to find information,
More informationQPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems
Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route
More informationBSO Plus ANNUAL SAFETY REFRESHER 2015
The BSO Plus Safety Refresher is an annual checkpoint designed from the content in BSO Plus. Completing this refresher is a requirement for the Basic Safety Recertification (BSR) course, so please ensure
More informationInstalling, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144
Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering
More informationPromotion of Personal Safety: Chapter 11
Promotion of Personal Safety: Chapter 11 Using Body Mechanics Reasons for using Proper Body Mechanics: Muscles work best when used correctly Makes lifting, pulling, and pushing easier Prevents unnecessary
More informationPreventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
More informationNATIONAL TRAINING CENTER COURSE CATALOG
NATIONAL TRAINING CENTER COURSE CATALOG 2 The National Training Center, in association with National Field Services, offers your employees courses on a range of safety and technical related topics, led
More informationExercise 3-2. Two-Wire and Three-Wire Controls EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Two-wire control
Exercise 3-2 Two-Wire and Three-Wire Controls EXERCISE OBJECTIVE Construct two-wire and three-wire control circuits and understand their principles. DISCUSSION OUTLINE The Discussion of this exercise covers
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationPromotion of Safety. Chapter 10 Intro to HST
Promotion of Safety Chapter 10 Intro to HST Using Body Mechanics Unit 1 Prevent strain and help maintain muscle strength Prevent injury to yourself and others Reasons for Using Body Mechanics Muscles work
More informationSAFETY IN THE SHOP MPO NOA Reference:
MPO-0100 SAFETY IN THE SHOP NOA Reference: The material covered satisfies in whole or in part, the requirements of the National Occupational Analysis for the Automotive Service Technician task 1. Description:
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other
More information10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
More informationP h o t o g r a p h i c L i g h t i n g ( 1 1 B )
9 1 5 9 P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 30S/30E/30M A Photography Course 9 1 5 9 : P h o t o g r a p h i c L i g h t i g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Descriptio This course focuses
More informationIron Ore Company of Canada Health, Safety & Environment
Hazardous Materials 1 PURPOSE The entry of all substances onto site is controlled, Banned substances are not admitted, Potential health effects and hazards are identified and controlled, All products are
More informationGround Fault Circuit Interrupter(GFCI) Policy
NewStar Netronics, LLC American Products for the World Ground Fault Circuit Interrupter(GFCI) Policy 3926 East 3 rd Street Tulsa, OK 74112 Phone (918)894-5006 Fax (918)836-9909 tech@newstarnetronics.com
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the
More information! Warning, refer to accompanying documents.
About this Manual To the best of our knowledge and at the time written, the information contained in this document is technically correct and the procedures accurate and adequate to operate this instrument
More information1. Worker's compensation applies when an injury can be categorised as arising out of and in the course of the victim's employment.
Answers to Examples of Assessment Questions: Registered Occupational Safety Coordinator Level 1 1. Worker's compensation applies when an injury can be categorised as arising out of and in the course of
More informationUNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours
UNIT TITLE: CLEAN PUBLIC AREAS, FACILITIES AND EQUIPMENT NOMINAL HOURS: 60 hours UNIT NUMBER: D1.HHK.CL3.02 UNIT DESCRIPTOR: This unit deals with skills and knowledge required to clean public areas, facilities
More informationInitial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing
Initial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing Answer the following questions to assist you in identifying the health and safety hazards associated with your processes: Section
More informationCCSSL35 Carry out the wiring and testing of electrical circuits and equipment
Carry out the wiring and testing of electrical circuits and equipment Overview This standard is about the basic competences that you need to wire up and test electrical equipment and circuits for the theatre
More informationMotor Vehicle Body Repairer (Metal and Paint)
Interprovincial Program Guide Motor Vehicle Body Repairer (Metal and Paint) Nova Scotia Curriculum Standard Based on the Interprovincial Program Guide New Levels 1, 2, 3 & 4 in September 2018 (pg. 9 for
More informationWHMIS WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM
WHMIS WORKPLACE HAZARDOUS MATERIALS SYSTEM WHMIS 2015 is a system that sets out the requirements for providing information on the safe use of hazardous products used in the workplace. It aims at informing
More informationhttp://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and
More informationOSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
More informationScrew Gas Compressors & Dry Gas Seals Applications. Singapore, Mandarin Orchard Singapore. Training Course : Training Course For One Week In
Training Course : Screw Gas Compressors & Dry Gas Seals Applications Training Course For One Week In Singapore, Mandarin Orchard Singapore Which Be Held As Under Details : Tel. : 00965 22610021 99600277,
More informationCalifornia Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
More informationStark State College For Term: Summer 2017
7/20/2017 9:59:23 AM Business/ Entrepreneurial Accounting/Finance ACC121 PRINC OF ACCOUNTING This course is an introduction to accounting which covers the accounting cycle and generally accepted accounting
More informationJOB READY ASSESSMENT BLUEPRINT COLLISION REPAIR AND REFINISHING TECHNOLOGY - PILOT. Test Code: 3283 Version: 01
JOB READY ASSESSMENT BLUEPRINT COLLISION REPAIR AND REFINISHING TECHNOLOGY - PILOT Test Code: 3283 Version: 01 Specific competencies and skills tested in this assessment: Safety Demonstrate knowledge of
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationPreparer: Owner: Approver: EHS Team Member TES Manager Site Manager
Procedure No.: BMEHS-002.033 Page: 1 of 10 Preparer: Owner: Approver: EHS Team Member TES Manager Site Manager Document Revision Change Table Revision Revision Description Revised Revision Number New By
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationGeneral maintenance engineering applications
Unit 868 General maintenance engineering applications UAN: J/600/6007 Level: Level 2 Credit value: 12 GLH: 55 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: This unit has been derived
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationGas Network Craftsperson
Gas Network Craftsperson Unit EIAU016 Carrying out Fault Diagnosis on Electrical Equipment and Circuits This assessment specification has been developed as part of the network maintenance craftsperson
More informationPersonal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9
Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards
More informationMAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE Each University of Maine employee, Faculty, graduate student, and undergraduate shall take the University of Maine Basic Safety Training
More informationComputer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit
Computer Integrated Manufacturing (PLTW) TEKS/LINKS Student Objectives One Credit Suggested Time Ranges First Six Weeks History of Manufacturing PFD 1.1(A) The student will describe why and how manufacturing
More informationAccident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
More informationEnergy Control. Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: cell:
Energy Control Suite 2A, 55 Frid Street Hamilton, ON L8P 4M3 office: 905.577.0303 cell: 905.977.0210 consultant@staffaid.ca www.staffaid.com Safety, Energy Control, Power Lockout & Function Test Procedures
More informationHEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING
HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING INTRODUCTION Manual handling is interpreted as the transporting or supporting of any load (which also includes a person or an animal). It involves a variety
More informationJob Hazard Analysis. University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195
Job Hazard Analysis University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195 Working Job Title: Utility Worker 2 (CEO) JHA Completed by Date: The Job
More informationFor Signals Training Consortium Use Only
Introduction and Overview to Highway Grade Crossings Course 104 PARTICIPANT GUIDE Introduction and Overview to Highway Grade Crossings Participant Guide Signals Maintenance Training Consortium COURSE 104
More information