WELDING POSITIONER MODEL NO:
|
|
- Francis Chase
- 6 years ago
- Views:
Transcription
1 WELDING POSITIONER WP /4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 0 to 90 Tilting Angle Standard w/foot Control Switch Shipping Weight 113 lbs. Designed for rotation of lighter work pieces. Will hold 440 lbs. in the horizontal position and 250 lbs. in the vertical position. Note: C/G of load not to be more than 4 from the center of the turntable and 4 from the face of the turntable. (Foot Control CFS-302) See page 163 for complete specifications. Low Profile Self Centering Reversible Jaws Easy Mounting External & Internal Gripping on O.D on I.D. Shipping Weight 20 lbs. The above illustration shows the chuck mounted to the PROFAX Welding Positioner WP
2 WELDING POSITIONERS WP /8 Diameter Table RPM Rotation Speed Power Tilt Adjustment 0 to 135 Tilting Angle Standard Fwd./Rev. Foot Control Shipping Weight 580 lbs. Will hold 500 lbs. in the vertical position and 900 lbs. in the horizontal position. Note: C/G of load not to be more than 6 from the center of the turntable and 6 from the face of the turntable. WP-1000 Will hold 1,000 lbs. in the vertical position and 1,750 lbs. in the horizontal position. Note: C/G of load not to be more than 6 from the center of the turntable and 6 from the face of the turntable. (Foot Control CFS-404) See page 163 for complete specifications. 24-1/2 Diameter 0.2 to 2 RPM Rotation Speed 0 to 135 Tilting Angle Standard Fwd./Rev. Foot Control Shipping Weight 1,200 lbs. See page 163 for complete specifications. (Foot Control CFS-404) 161
3 WELDING POSITIONER WP (440V 3PH) 2000 lb. Welding Positioner 35-1/2 Diameter Table.2 to 1.2 RPM Rotation Speed 440V 3 Phase models 0 to 135 Tilting Angle Standard Hand Control Pendant Shipping Weight 1,640 lbs. Will hold 2,000 lbs. in the vertical position and 3,500 lbs. in the horizontal position. Note: C/G of load not to be more than 12 from the center of the turntable and 12 from the face of the turntable. 162
4 WELDING POSITIONER GRIPPER PROFAX NO. POSITIONER O.D. CAPACITY I.D. CAPACITY WEIGHT WPG-22 WP-500/WP-1000/WP LBS. WPG-26 WP-1000/WP ½ LBS. WPG-34 WP LBS. Self Centering Reversible Jaws Easy Mounting COMPLETE POSITIONER SPECIFICATIONS SPECIFICATIONS WP-250 WP-500 WP-1000 WP CAPACITY VERTICAL 250 LBS. 500 LBS. 1,000 LBS. 2,000 LBS. CAPACITY HORIZONTAL 440 LBS. 900 LBS. 1,750 LBS. 3,500 LBS. LOAD CENTER OF GRAVITY TILT MANUAL POWER POWER POWER TILT ANGLE (DEGREES) TILT ANGLE INDICATOR N/A N/A N/A STANDARD GROUND CAPACITY 200 AMPS 300 AMPS 500 AMPS 1,000 AMPS GROUNDING DEVICE CARBON BRASS BRASS ROTARY HIGH FREQ. PROTECTION YES YES YES YES VOLT / AC PH POWER REQ. 5 AMP 10 AMP 10 AMP 5 AMP TABLE THICKNESS 9/16 7/8 1 1 TABLE DIAMETER 13-3/4 19-5/8 24-1/2 35-1/2 TABLE CONFIGURATION 3 - SLOT 4 - SLOT 4 - SLOT 4 - SLOT OPTIONAL CHUCK WPC-11 WPG-22 WPG-22 and 26 WPG-22, 26 and 34 TABLE HEIGHT (HORIZONTAL) 13-7/ / / /8 TABLE CENTER HEIGHT (VERTICAL) 10-3/ / /4 THROUGH HOLE 1-1/8 N/A N/A N/A TABLE R.P.M ROTATION MOTOR H.P. 1/8 H.P. 1/6 H.P. 1/4 H.P. 1 H.P. MAX. TORQUE 345 LBS./FT. 2,000 LBS./FT. 6,000 LBS./FT. 12,000 LBS./FT. VARIABLE SPEED ROTATION YES YES YES YES FOOT CONTROL SINGLE FWD./REV. FWD./REV. N/A HAND PENDANT OPTIONAL OPTIONAL OPTIONAL STANDARD ANCHOR POINTS LEVELING BOLTS N/A INCLUDED INCLUDED INCLUDED UNIT WIDTH 12-1/ /4 36 UNIT LENGTH /8 48-1/2 61-1/2 SHIPPING WEIGHT 113 LBS. 580 LBS. 1,200 LBS. 1,640 LBS. 163
5 TURNING ROLLS TR-1500 Includes One Drive and One Idler 1-1/2 to 16 Diameter 0 to 8 RPM Rotation Speed Standard w/foot Control Switch Adjustable Drive Tension Shipping Weight 146 lbs. Maximum load capacity 1500 lbs. (750 lbs. max for each the drive and idler) *Note: Additional idler rolls available PROFAX NO: IR-750 TR-5000 Includes One Drive and One Idler 4-48 Diameter 0 to 5 RPM Rotation Speed Standard Fwd./Rev. Foot Control Shipping Weight 430 lbs. Maximum load capacity 5,000 lbs. (2,500 lbs. max for each the drive and idler) *Note: Additional idler rolls available PROFAX NO: IR
6 WELDING MANIPULATORS Power mast: Constant speed 60 vertical travel 92 clearance under boom WM-66-4 Power boom with: 78 of reach 200 lb. load capacity Variable speed Auto and manual settings Anti-fall device Manual travel car with: V-wheels Brake Locking swivel base with: Mounting bracket for power source Hand control pendant 440V 3 phase PROFAX NO: WM-SA Optional for mounting sub-arc package. 165
7 Adjustment Slide, Oscillator Linear Type, and Oscillator Angle Type WCS Way Torch Adjustment Slide with Torch Angle Adjustment Specifications: LxWxH Adjustment: 1-3/4 x 1-3/4 x 1-3/4 Slide Adjustment: Manual Hand Wheel Torch Angle Adjustment: 90 Degree Torch Diameter: 5/8-1-3/8 Torch Clamp: V-Block Load Capacity: 10 lbs. Easy Mounting: 4 Drilled & Tapped Holes Weight: 3.5 lbs. WCS Way adjustment slide WO-1S Welding Oscillator Linear Type WO-1S Welding oscillator - Linear WO-1V Welding Oscillator Angle Type Specifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: IPM Weld Width: 0-1-9/16 Centerline Adjustment: +/- 1/4 L & R Dwell: 0-2 sec. Motor 24V DC/Rack & Pinion Drive Input Power: 110 or 220 VAC Specifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: 0-50 RPM Swing Width: +/- 8 deg. Centerline Adjustment: +/- 4 deg. L & R Dwell: 0-2 sec. Motor 24V DC/Worm Drive Input Power: 110 or 220 VAC WO-1V Welding oscillator - Angle 166
8 Welding Slide, Compound Slides and Motorized Welding Cross Slides WCS-8 & WCS-88 Welding Slide & Compounded Welding Cross Slides Specifications: (WCS-8) Travel: 7-7/8 Slide Adjustment: Manual Hand Wheel Integrated Slide Lock Load Capacity: mm (approx. 3/4 ) Dia. Hardened Load Bearing Guide Rods 16mm (approx. 5/8 ) Dia. Drive Screw Length of Slide: 13-1/4 (Including Handle While Extended 18 ) Height of Slide: 4-3/8 Depth: 2-3/8 Easily Compounded: 4 Bolts (Makes WCS-88) Convenient to Mount: 4 Pre-Drilled Holes Weight: 21 lbs. (WCS-88: 42 lbs.) WCS-8 WCS-8 Welding slide WCS-88 Compounded slides WCS-88M Motorized Welding Cross Slides WCS-88 Specifications: Travel: 7-7/8 x 7-7/8 Slide Adjustment: Variable 0-8 i.p.m. Joystick Pendant Control Load Capacity: Motors: 24 VDC Input Power: 115 VAC WxHxD: 19-1/4 x 19-1/4 x 6-3/4 1-1/8 Dia. Hardened Load Bearing Guide Rods 1 Dia. Driven Screw Back of Slide Mount: 4 Pre-Drilled Holes Welding Head Mounting: 6 Drilled & Tapped Holes Weight of Slides: 86 lbs. Weight of Slides & Controls: 98 lbs. WCS-88M Motorized welding cross slides 167
WARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS
WELDING POSITIONER MODEL NO: WP-250 00317OG091207 WARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS Warnings and Safeguards for Welding and Cutting Operations IMPORTANT - Protect yourself and others! Remember
More informationAutoDrill s OUTSTANDING FEATURES
PRODUCTION DRILLING & TAPPING SOLUTIONS Reduce Your Costs and Increase Your Production The Affordable, Powerful, Compact Solution AutoDrill s OUTSTANDING FEATURES Self Feeding with Air or Oil Thrust Capacity
More informationWARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS
WELDING POSITIONER MODEL NO: WP-500 00336OG09207 WARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS Warnings and Safeguards for Welding and Cutting Operations IMPORTANT - Protect yourself and others! Remember
More informationTRP 63 / TRP 72 / TRP 93 / TRP 110 CENTRE LATHES
TRP 63 / TRP 72 / TRP 93 / TRP 110 CENTRE LATHES BASIC PARAMETERS Max. torque on spindle: Max. weight of workpiece between centres: 5,600 Nm 6 tonnes Turning length: 1,000 to 16,000 mm In their basic version
More informationA Figure Skate Sharpening Machine, version 1.1
A Figure Skate Sharpening Machine, version 1.1 By R. G. Sparber Copyleft protects this document. 1 This article provides a high level view of a figure skate sharpening machine I recently built. No plans
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More informationA. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
More informationHydraulic lift crane. Complies with ANSI/ASME B 30.5 LR enus LR
Hydraulic lift crane LR 1110 Complies with ANSI/ASME B 30.5 enus LR 1001.02 Concept and characteristics LR 1110 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationMAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL.
MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. INDEX DESCRIPTION PAGE (1)SPECIFICATION 2 (2)OUTSIDE DIMENSION LAYOUT 3 (3)INSPECTION REPORT 4 (4)PREPARATION FOR OPERATION 5 4-1.LUBRICATING
More informationHeavy Equipment & Rigging Specialist Training
Heavy Equipment & Rigging Specialist Training Module 1 Unit 4: Intro to Rigging May08 1 Key Points Review of Exercise Goals Discuss Rigging Components Language of Crane Signals Review Anchor Installation
More information15000 Series Exhausting Arm - Wall Mount Models: 15076/15106/15146
Operation and Maintenance Manual 15000 Series Exhausting Arm - Wall Mount Models: 15076/15106/15146 MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 Receiving Assembly Information 15000 Series Exhausting
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationOWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved
OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationMetham Aviation Design Limited, Station Approach, Four Marks, Alton. Hants. GU34 5HN Tel +44 (0) Fax +44 (0)
Contents Page General Information 1 Items Supplied 1 Variants 1 Compatibility with other products 1 Fitting a Housing 2 Mounting a Bowler 3 Safety Precautions 4 Control Connections 5 Setting up a Bowler
More informationEngineering Data RPM: 3000 HP: Serv. Factor: 1,0 KW:,37 Form Factor: 1,00 Amps: 20 KW2: Form Factor 2: FLA2: Volts: 24. Frame: 71D
Product Features Catalog No: L085/O043/098066.00 Model: CI42D34FT7C Engineering Data RPM: 3000 HP: Serv. Factor: 1,0 KW:,37 Form Factor: 1,00 Amps: 20 KW2: Form Factor 2: FLA2: Volts: 24 Frame: 71D Max
More information6000SLX HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Contents Specifications 3-4 Symbols 4 Outline Winch Assingment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications : Luffing
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationBabolat Star 5 Review. Babolat Star 5. A Review MSRP $
Babolat Star 5 A MSRP $3500.00 The Babolat Star 5 presents a technological and professional machine that uses the many years of Babolat development making this machine a reasonably priced option for any
More informationBuilding a Wind Tunnel
Technical Report TR-5 Building a Wind Tunnel Estes Industries 1963 These reports are published as a service to its customers by Estes Industries, Inc., Box 227, Penrose, Colorado 81240 Building a Wind
More informationSETTING UP THE MODEL 210B SRA
SETTING UP THE MODEL 210B SRA SAFETY PRECAUTIONS FOR THE MODEL 210B SRA System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris: During
More informationStringway ML100 Review. Stringway ML100. A Review MSRP $1,195.00
Stringway ML100 A MSRP $1,195.00 The Stringway ML100 is a technical table top machine with features that are unique. The racquet support plate is adequate and the internal supports and hold down mechanics
More informationExchange Part# 2018 List Price CALL FOR PRICING CALL FOR PRICING
16754-M BALLSCREW LX X-AXIS METRIC $1,038 16852 BALLSCREW Z-AXIS $1,660 6000-2Z BEARING - LOWER DOOR GUIDE REPLACE WITH 22714-58 OR 26327 16300 BEARING HOUSING ASSY-X AXIS left side $106 16295-1 BEARING
More informationReverse Circulation Drilling Rig
BUILT ON BUILT TRUST ON BUMA Reverse Circulation Drilling Rig 02. www.bumace.com COMPANY BUMA CE is a leading manufacturer and supplier of foundation equipment in Korea. Since the company was built in
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More informationPrince Neos 1500 Review. Prince Neos A Review $
A $1395.00 The is a lock-out machine and the natural extension of the venerable Neos 1000 Neos genre that has been around for some time. This machine, at this price, is an entry level machine that you
More informationTube Puller CP/CPS series. Pullers designed with cutting edge technology
Q U A L I T Y T U B E T O O L S www.krais.com CP/CPS series Pullers designed with cutting edge technology Q U A L I T Y T U B E T O O L S w w w. k r a i s. c o m MAIN FEATURES All new CP collet type and
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationCABLE REPAIR PROCEDURE 2100 Series, 2000 Series & Eventer
August 2005 CABLE REPAIR PROCEDURE 2100 Series, 2000 Series & Eventer 2000 SERIES 2100 SERIES EVENTER 7514 Alabonson Rd. Houston, Texas 77088 281-999-6900 281-999-6966 (fax) 51A Caldari Rd., #16 Concord,
More informationUT4 and UT4-22 Cable Pulling Systems
INSTRUCTION MANUAL UT4 and UT4-22 Cable Pulling Systems Serial Code AMJ Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationBorais Petroleum Investment Co. SLOT RECOVERY SERVICE General Procedures
Borais Petroleum Investment Co. SLOT RECOVERY SERVICE General Procedures Slot Recovery Procedures: Slot Recovery Running Procedures 1. Cut And Retrieve Operation: Borais s cut and retrieve equipment: 1.
More informationImportant Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.
Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationPuyuan. QUY 160 Crawler Crane Technical Manual
Puyuan QUY 160 Crawler Crane Technical Manual 5 Pictures and technical parameters in sample books may not accord with the delivery goods because of the improvement in design. Please understand and make
More informationIntroduction INDEX. INTRODUCTION HSE
Introduction INDEX SECTION PAGE INTRODUCTION ORDERING CODE GLOSSARY MOTOR OPTION TECHNICAL SE SE3 / SE5 SE7 / S7 SE9 / S9 SE12 / S12 SE14 / S14 SE14-2 / S14-2 SE17 / S17 SE17-2 / S17-2 SE21 / S21 SE21-2
More informationAlpha Ghost Review. Alpha Ghost. A Review MSRP $
Alpha Ghost A MSRP $2495.00 The Alpha Ghost represents the latest technology offering from a company that is well known for quality, value stringing machines. The Ghost incorporates the auto brake system
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationALL TERRAIN CRANE AR-1200M-1
ALL TERRAIN RANE AR-12M JAPANESE SPEIFIATIONS ARRIER MODEL FAUN RTF12-5 SPE. NO. AR-12M-1 AR ontrol No. JA-3-279 - Return to INDEX AR-12M RANE SPEIFIATIONS RANE APAITY 12.2m Boom 12,kg at 2.7m (17part-line)
More informationPVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
More informationTechnical Datasheet. Rigid & Retractable Pendants. Rigid Pendant
Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision
More informationRev S Terminator Parts Book Page 1 of 14 Top E nd
1181387 Rev S.2017.01.17 Terminator Parts Book Page 1 of 14 Top E nd 1181387 Rev S.2017.01.17 Terminator Parts Book Page 2 of 14 Top E nd Terminator: Frame Assembly PER CHAIR Frame Only: Aluminum for Folding
More informationE Cube Lift Model: ECU Installation Instructions
E Cube Lift Model: ECU Installation Instructions 0 E CUBE LIFT INSTALLATION INSTRUCTIONS Please read installation instructions carefully before installation and keep it for future reference. INDEX: Important
More informationUT4 and UT4-22 Cable Pulling Systems
INSTRUCTION MANUAL UT4 and UT4-22 Cable Pulling Systems Serial Codes AMJ and ALB Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
More informationE-trike Li Assembly Guide
PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box
More information6000SLX SL-N HYDRAULIC CRAWLER CRANE
SL-N SL-N HYDRAULIC CRAWLER CRANE 1804 05H.EA292 SL-N Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications
More informationMASTEEL FABRICATION EQUIPMENT
MASTEEL FABRICATION EQUIPMENT MBHS SERIES HYDRAULIC SYNCHRONIZED CNC BRAKES STANDARD CONTROL FEATURES Standard KV-2004 CNC control with 11 TFT screen display 0.0004 high resolution linear scales provide
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More informationTop Drive System. 1. AC VFD Top Drive System. Technical characters
Top Drive System The top drive system is a high-tech content products, which integrates mechanical, electrical hydraulic, and communications integration, and was used to replace traditional rotary table-kelly
More informationTrue Tension Professional
True Tension Professional A *MSRP $3,000.00 *The True Tension Professional is a model that I have modified to include sixteen (16) racquet supports. In addition to the supports I am using clamps with no
More informationIt allows you to. is the Best Option. More information at
Document - 17AIO Launch and Retrieve by yourself without getting your partner wet Copyright C Release & Retrieve Boat Latch Pty Ltd, 2016 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty
More informationSecurity and confidence at height.
A Security and confidence at height. Vertical Systems DISTRIBUTED BY M DBI-SALA Vertical Systems are designed to complement your ability to work while meeting all applicable OSHA and ANSI standards. Vertical
More informationFIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
More informationAPAS - 72 Parts Manual
VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE
More informationSpecifications Testing & Adjusting Disassembly & Assembly
SB4191E00 Jul. 2005 Specifications Testing & Adjusting Supplement for Quad Lift Mast D20/25/30/32/33S-3 G/GC20/25/30/32P-3 G/GC20/25/30/32E-3 Important Safety Information Most accidents involving product
More informationRev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationInvacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 00 ton x. m Max. Boom Length: m Max. Luffing Jib Combination: 78 m + CONFIGURATION STD Long Boom Max. Lifting Capacity: 113. metric tons x 10.0 m Max. Boom
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More information632 AccuPro Set-up & Operation
632 AccuPro Set-up & Operation Always check: Reel & Roller bearings Bent or broken blades Make sure the reel spins freely in the frame Place the Reel Into the Machine There are three lifting options for
More informationAIR CONDITIONERS WA14**W SERIES
FORM NO. A66-225 REV. 3 AIR CONDITIONERS Features Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light
More information6000SLX SL-T HYDRAULIC CRAWLER CRANE
SL-T SL-T HYDRAULIC CRAWLER CRANE 1804 05H.EA293 SL-T Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications
More informationTechnical Data. Luffing Capacities. Luffing Attachment (supersedes 5784)-1217-U2Luffer
1 5802 (supersedes 5784)-1217-U2Luffer Technical Data Luffing Capacities Luffing Attachment CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual
More informationExchange Part# 2018 List Price CALL FOR PRICING
List 21824-1-10PK 10 PK -FUSE-3AG-TIME DELAY-.25x1.25L-1A $15 N/A N/A N/A 21824-5-10PK 10 PK-FUSE-3AG-TIME DELAY-.25x1.25L-5A $15 N/A N/A N/A 21824-8-10PK 10 PK-FUSE-3AG-TIME DELAY-.25x1.25L-8A $15 N/A
More informationTechnical data Hydraulic lift crane LR 1300 SX. Complies with ANSI/ASME B
Technical data Hydraulic lift crane LR 1300 SX Complies with ANSI/ASME B 30.5 1006.01 Dimensions Basic machine with undercarriage R 32 11 10 34 22 9 9 10 7 5 5 3 16 5 57.7 5 7 27 11 31 8 14 6 2 47.2 26
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE GRIPPER WGO135 (without manifold and intensifier) PRODUCT
More informationProduct Guide. Crawler Crane
Crawler Crane 220 US Tons (100 Metric Tons) @ 16 ft 5 in Radius 285 ft Max Tip (Main Boom) Main Boom, Fixed Jib and Luffing Jib Configurations Product Guide KEY FEATURES ULTRA CAB The Ultra Cab, designed
More informationIMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA.
User Instruction Manual Precast Concrete Beam Horizontal Lifeline System This manual is provided as the Manufacturer s Instructions, and should be used as part of an employee training program as required
More information60 PRO FINISH CUT OWNER S MANUAL. With Assembly Instructions For Model: Pro60K KUNZ ENGINEERING, INC. / MENDOTA, IL / PH (815) /08
60 PRO FINISH CUT OWNER S MANUAL With Assembly Instructions For Model: Pro60K KUNZ ENGINEERING, INC. / MENDOTA, IL 61342 / PH (815) 539-6954 1/08 ASSEMBLY INSTRUCTIONS READ THE COMPLETE ASSEMBLY INSTRUCTIONS
More informationExchange Part# 2018 List Price CALL FOR PRICING CALL FOR PRICING CALL FOR PRICING
16754-M BALLSCREW LX X-AXIS METRIC $1,038 16852 BALLSCREW Z-AXIS $1,660 16300 BEARING HOUSING ASSY-X AXIS left side $106 16295-1 BEARING HOUSING ASSY-Z AXIS $106 N/A N/A 23930 BEARING SET (2) ANGULAR CONTACT
More informationOperator s Manual. 2010, 2015, 2020, 2025 Material Lifts
July 2017 Operator s Manual 2010, 2015, 2020, 2025 Material Lifts! Before operating this lift, read and understand this Operator s Manual. Become familiar with the potential hazards of this unit. Call
More information80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES
OPERATOR S MANUAL FOR MORSE Model 80A and 80A-M for 55 gallon standard steel drums (22½ diameter) Model 80C for steel or fiber drums (21-23 diameter) Model 80i for 55 gallon steel drum (22-½ diameter).
More informationOperator s Manual. Series 2100 Contractor Lifts
October 2013 Operator s Manual Series 2100 Contractor Lifts! Before operating this lift, read and understand this Operator s Manual. Become familiar with the potential hazards of this unit. Call SUMNER
More informationTechnical data Hydraulic lift crane. LR 1300 sx LR 1300
Technical data Hydraulic lift crane LR 1300 sx LR 1300 Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 LR 1300 2250 10 5000 1465 1700 8500 9650 42 1870 10 00 0 R 69 Optional: Flat
More informationTidland Series 'C' Knifeholder INSTALLATION MANUAL Swing Cartridge Class II, III Shear Slitting
Tidland Series 'C' Knifeholder INSTALLATION MANUAL Swing Cartridge Class II, III Shear Slitting Please read and understand all the instructions before you start to install the Tidland Series 'C' Knifeholder.
More informationTop Drive Lifting Configuration Manual Update
Model: Standard 500/750T and 275T Serial #: See Serial Numbers Affected Aug. 31, 2016 Product Bulletin # TDS-162 Top Drive Lifting Configuration Manual Update The Standard 500/750T and 275T Top Drive Parts
More information2018 List Price. Exchange Part#
List 21824-10-10PK OBSOLETE SEE 21830-10-10PK $15 N/A N/A N/A 21824-8-10PK 10 PK-FUSE-3AG-TIME DELAY-.25x1.25L-8A $15 N/A N/A N/A 20924 220/440V CONVERSION OPTION - K2/K3 N/A N/A N/A K2/K3 22581-1 AIR
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationTechnical data Hydraulic lift crane LR 1300 SX
Technical data Hydraulic lift crane LR 1300 SX Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 2250 10 5000 1465 1700 8500 9650 42 1870 10 00 0 R 69 1485 00 365 85 1500 8300 0 Operating
More informationSaab Seaeye Cougar XT Compact
The Seaeye Cougar-XT Compact is a highly flexible and extremely powerful electric ROV with working depths of 300 metres. This system comes with almost all of the specifications of the very reliable Couger-XT
More informationFairlane & Meteor Instruction Package RC-114K. Rear Coilover Suspension Kit NOTE...
ROD & CUSTOM Motorsports INCORPORATED 1962-1965 Fairlane & Meteor Instruction Package RC-114K Rear Coilover Suspension Kit NOTE... PLEASE READ ALL INSTRUCTIONS INCLUDED WITHIN THIS PACKAGE. IF AFTER READING
More informationShop online Phone: (800) Fax: (866) Page449. Jacks & Components
Shop online www.wholesaletrailer.com Phone: (800) 400-5275 Fax: (866) 400-5275 Page449 Jacks 5th Wheel A: Mfg. Item Number Alias number Description SO A 75340 75333 Jack 6K 5th Wheel Manual Pair Atwood
More informationTypical Strength of Glued Connection. Typical Strength of Screwed Connection
Rodder Introduction DCD offers one of the most comprehensive range of Rodders available anywhere in the world - from the smallest 1/8 dia. Fish Tapes to the rugged 1/2 Rodders. The Rod DCD rods are manufactured
More informationView thousands of Crane Specifications on FreeCraneSpecs.com LR 1300 SX. Technical data Hydraulic lift crane LR 1300
Technical data Hydraulic lift crane LR 1300 SX LR 1300 Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 LR 1300 5000 2250 10 1465 1700 8500 9650 42 1870 10 00 0 R 69 Optional: Track
More informationInstallation and Training Manual
AirForce1 Tower Kit Installation and Training Manual FuturEnergy Limited Ettington Park Business Centre Stratford upon Avon CV37 8BT +44 (0)1789 451070 Table of Contents Safety Notes... 3 Parts Supplied
More informationAIR CONDITIONERS WA14 SERIES
FORM NO. A66-220 REV. 3 AIR CONDITIONERS Features Outdoor air conditioner designed for ground level or rooftop installations. These units offer comfort and dependability for single, multi-family and light
More information602 STRINGING MACHINE OWNER'S MANUAL
PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...
More informationVERTICAL TURBINE PUMPS Right Angle Gears. Shaft Guarding for Horizontal Mounted Spicer Universal Joint Drive Shafts
Peerless Pump Company Indianapolis, IN 46207-7026 VERTICAL TURBINE PUMPS Right Angle Gears SECTION 110 Page 1 January 2, 2007 Shaft Guarding for Horizontal Mounted Spicer Universal Joint Drive Shafts A
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationBridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
More informationDesign Based Anchoring 2009 FORD F-150
Design Based Anchoring OWNERS MANUAL USERS MANUAL 2008 Chief Automotive Technologies. CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from date of installation
More informationIndex Table. Model 794. Installation, Operating and Maintenance Instructions
CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009
More informationOPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M)
OPERATING and MAINTENANCE INSTRUCTIONS MAXIS 3K Puller (M3K-M) 04/17 (M3K-M) READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING OR SERVICING THIS TOOL TABLE
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationDetroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &
Detroit Speed, Inc. Rear Coilover Conversion Kit 1982-02 Camaro/Firebird P/N: 042440 & 042441 The Detroit Speed Inc., Rear Coilover Conversion Kit allows the latest in coilover spring/shock technology
More informationRoad Lever. Feature: Black bracket / Barrel lever. Standard finish: Available in painted or anodized colors. Approx. 166g. / pair. Mini-Order: 50pair
Road Lever Tektro Model : RL740/RL741 Top Mount lever For use with liner pull brakes Quick Release design Forged aluminum lever / cast aluminum bracket Hinged clamp style Reach adjustment RL740: for 24mm
More informationOPERATIONS/PARTS MANUAL FOR PATTERSON'S MODEL # WWP40M-LPS-6 LOW-PROFILE BARGE CONNECTOR WINCH
W. W. Patterson Company 3 Riversea Road Pittsburgh, PA 15233 Phone: 800-322-2018 FAX: 412-322-2785 OPERATIONS/PARTS MANUAL FOR PATTERSON'S MODEL # WWP40M-LPS-6 LOW-PROFILE BARGE CONNECTOR WINCH Please
More information