Line Blind Valves. Double Block and Bleed Cargo Segregation API 607. Fire Safe Certified
|
|
|
- Juliana Robinson
- 6 years ago
- Views:
Transcription
1 Year : API 0 Fire Safe Certified New Innovative Patented Design Page
2 Year : Introduction Easy to operate and reliable in use. Applications Crude oil product (Tankers) Chemical Tankers. LPG and LNG carriers. Rigs. Refineries. Terminals. Chemical and Petrochemical industries. Wherever you require security When blinding Chemicals. Oils. Solvents. Gases. Water. (Steam saturated). The design meets the requirements of Full segregation between dierent uids. Double shut off (DBB). Safety against incorrect operation. Drainage of valve body (DBB). Visual inspection Quality product. Simple and efficient design. Small over all dimensions. Full flow. VALVE OPEN Top cover in position and valve discs removed. FREE FLOW VALVE CLOSED Valve discs in position cover plates removed. 00% TIGHT Page
3 Year : Line Blind Valve Models, Figure Numbers and Features Figure 00 The Classic Double Block & Bleed Line Blind Valve. Easy operation, trouble-free service. When closed no liquid or gas can leak to the oposite side, up- and downstream fluids are fully segregated (Double Block & Bleed).. One person can operate "~" valves, people can operate the larger sizes "~".. Simple and solid construction requires minimum maintenance.. Short face to face length.. Several Flange Standards available, ANSI/ASME, DIN, JIS, etc.. When the valve is closed the top cover can be removed to inspect the valve's body cavity for possible leakage (Double Block. & Bleed). Plug in cavity bottom to bleed out leaked fluid. Figure 0 Figure 0 Double Block & Bleed Expanding Gate Valve. Quick operation, trouble-free service. When closed no liquid or gas can leak to the oposite side, up- and downstream fluids are fully segregated (Double Block & Bleed).. Simple and solid construction requires minimum maintenance.... Only one person needed to operate, saves time and energy... Several Flange Standards available, ANSI/ASME, DIN, JIS, etc. Easy to operate, no contact with the pipeline fluids, internals do not have to be removed when opening the valve. No tools required to operate the valve, just turn the handwheel to open/close the valve When the valve is closed the valve cavity can be inspected, by removing the drain plug, for possible leakage (Double Block. & Bleed) Plug in cavity bottom to bleed out leaked fluid. Double Block & Bleed Expanding Gate Valve with Automatic Bleed System As Figure 0 however with automatic bleed system.. Cavity Bleed opens automatically when valve is closed and closes automatically when valve opens Figure 0 The New Innovative Design Double Block & Bleed Line Blind Valve As Figure 00 however with special device to quickly remove the valve internals. Quick and easy removal of the valve internals Page
4 Year : Figure 00 H 0 Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS T ØG DNV TYPE APPROVED PCD ØJ L ØM-N MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) AISI 0 TIGHTENING NUT A Gr.CFM(MoMin.%) AISI 0 DISC SEAL PTFE PTFE STOP PIN AISI AISI 0 TOP COVER SEAL KEMFLON+PTFE KEMFLON+PTFE TOP COVER BOLTS AISI AISI 0 SPRING STAINLESS STEEL STAINLESS STEEL TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB 0 WASHER AISI AISI 0 TOP COVER NUT AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE DRAIN PLUG AISI AISI 0 S.S. Stainless Steel(MoMin.%) C.S. Cast Steel(GS-C) Page
5 Year : Figure 00 0 PART LIST DIMENSIONS Unit:mm NO. PART NAME BODY DISC TIGHTENING NUT DISC SEAL STOP PIN TOP COVER SEAL TOP COVER BOLTS SPRING TOP COVER 0 WASHER TOP COVER NUT DRAIN PLUG SEAL DRAIN PLUG SIZE øg H øj L øm N T PN M.0 " PN M.0 PN M.0 PN M.0 PN M.0 -/" PN M.0 PN M.0 PN M.0 PN M.0 " PN M.0 PN M.0 PN M.0 PN M 0.0 " PN M 0.0 PN M0 0.0 PN M0 0.0 PN M.0 " PN M.0 PN M.0 PN M.0 PN M0.0 " PN M0.0 PN M.0 PN M.0 PN M0.0 " PN M0.0 PN M.0 PN M.0 PN M0.0 0" PN M.0 PN M.0 PN M0.0 PN M0.0 " PN M.0 PN M.0 PN M0.0 "- " 0"- " Page
6 Year : 0 H T Figure 00 ØG Size DN0~DN0( ~0") Pressure cless class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS ØM-N PCD ØJ L MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC-BOLT A Gr.CFM(MoMin.%) AISI 0 DISC-ROD A Gr.CFM(MoMin.%) AISI 0 TIGHTENING-DISC A Gr.CFM(MoMin.%) AISI 0 SEEGER-RING AISI AISI FRICTION WASHER PTFE PTFE PRESSURE WASHER BRONZE BRONZE DISC SEAL PTFE PTFE STOPPER AISI AISI 0 0 TOP COVER SEAL KEMFLON+PTFE KEMFLON+PTFE TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB TOP COVER BOLTS AISI AISI 0 SPRING STAINLESS STEEL STAINLESS STEEL COVER -BAR A Gr.CFM(MoMin.%) A Gr.WCB WASHER AISI AISI 0 TOP COVER NUT AISI AISI 0 DRAIN PLUG AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE S.S. Stainless Steel(MoMin.%) C.S. Cast Steel(GS-C) Page
7 Year : DIMENSIONS Unit:mm SIZE øg H øj L øm N T Figure 00 " " " 0" " PN M0.0 PN M.0 PN M.0 PN M.0 PN M 0.0 PN M 0.0 PN M 0.0 PN M0 0.0 PN M PN M PART LIST NO. PART NAME 0 BODY DISC-BOLT DISC-ROD TIGHTENING-DISC SEEGER-RING FRICTION-DISC PRESSURE-DISC DISC SEAL STOPPER 0 TOP COVER SEAL TOP COVER TOP COVER BOLTS SPRING COVER-BAR WASHER TOP COVER NUT DRAIN PLUG DRAIN PLUG SEAL Page
8 Year : ØG 0 0 MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. DRAIN PLUG AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) A Gr.WCB DISC SEAL PTFE PTFE BOLT AISI AISI 0 BRACKET AISI AISI 0 SLIDE A Gr.CFM(MoMin.%) A Gr.WCB STEM AISI AISI 0 0 TOP COVER SEAL PTFE PTFE TOP COVER STUD AISI AISI 0 TOP COVER NUT AISI AISI 0 TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB PACKING PTFE PTFE GLAND BOLT AISI AISI 0 GLAND AISI AISI 0 BONNET NUT AISI AISI 0 BONNET STUD AISI AISI 0 BONNET A Gr.CFM(MoMin.%) A Gr.WCB 0 BRACKET AISI AISI 0 BRACKET STUD AISI AISI 0 BRACKET NUT AISI AISI 0 YOKE SLEEVE BRONZE BRONZE HANDLE STEEL STEEL S.S. Stainless Steel(MoMin.%) Page PCD=ØJ M-N A A - A C.S. Cast Steel(GS-C) L A T DIMENSIONS " -/" " " " " " 0" " Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS Figure 0 Unit:mm SIZE øg øj L øm N T PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M 0.0 PN M 0.0 PN M0 0.0 PN M0 0.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0
9 Year : ØG M-N PCD=ØJ MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) AISI 0 DISC SEAL PTFE PTFE BOLT AISI AISI 0 BRACKET AISI AISI 0 SLIDE AISI AISI 0 STEM AISI AISI 0 TOP COVER SEAL PTFE PTFE TOP COVER BOLT AISI AISI 0 0 TOP COVER NUT AISI AISI 0 TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB PACKING PTFE PTFE GLAND BOLT AISI AISI 0 GLAND AISI AISI 0 BONNET NUT AISI AISI 0 BONNET BOLT AISI AISI 0 BONNET A Gr.CFM(MoMin.%) A Gr.WCB BRACKET AISI AISI 0 BRACKTE BOLT AISI AISI 0 0 BRACKET NUT AISI AISI 0 YOKE SLEEVE BRONZE BRONZE HANDLE STEEL STEEL BOLT AISI AISI 0 BOTTOM PIN AISI AISI 0 BOTTOM SEAL PTFE PTFE PLUG AISI AISI 0 TRANSMITTAL BAR AISI AISI 0 SPRING BOX AISI AISI 0 SPRING AISI AISI 0 0 SPRING BOX COVER AISI AISI 0 NUT AISI AISI 0 STOP BAR AISI AISI 0 S.S. Stainless Steel(MoMin.%) Page 0 A - A 0 0 A C.S. Cast Steel(GS-C) L A T Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS DIMENSIONS " -/" " " " " " 0" " Figure 0 Unit:mm SIZE øg øj L øm N T PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M 0.0 PN M 0.0 PN M0 0.0 PN M0 0.0 PN M.0 PN M.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M.0 PN M.0 PN M0.0 PN M0.0 PN M.0 PN M.0 PN M0.0
10 Year : L Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS ØG Figure 0 DIMENSIONS PCD ØJ ØM-N Deep=T Unit:mm SIZE øg øj L øm N T JIS 0K M.0 " JIS K M.0 JIS 0K M.0 JIS 0K M.0 -/" JIS K M.0 JIS 0K M.0 JIS 0K M.0 " JIS K M0.0 JIS 0K M0.0 JIS 0K M.0 " JIS K M0 0.0 JIS 0K M0 0.0 JIS 0K M0 0.0 " JIS K M 0.0 JIS 0K M 0.0 JIS 0K M0 0.0 " JIS K M 0.0 JIS 0K M 0.0 JIS 0K M0.0 " JIS K M.0 JIS 0K M.0 JIS 0K M.0 0" JIS K M.0 JIS 0K M.0 JIS 0K M.0 " JIS K M.0 JIS 0K M.0 DIMENSIONS Unit:mm SIZE øg øj L øm N T PN M.0 " PN M.0 PN M.0 PN M.0 PN M.0 -/" PN M.0 PN M.0 PN M.0 PN M.0 " PN M.0 PN M.0 PN M.0 PN M 0.0 " PN M 0.0 PN M0 0.0 PN M0 0.0 PN M.0 " PN M.0 PN M.0 PN M.0 PN M0.0 " PN M0.0 PN M.0 PN M.0 PN M0.0 " PN M0.0 PN M.0 PN M.0 PN M0.0 0" PN M.0 PN M.0 PN M0.0 PN M0.0 " PN M.0 PN M.0 PN M0.0 Page 0
11 Year : A Quality Brand Industries..... Marine Chemical Petrochemical Oil / Gas Offshore Fluids. Fluid. Oil. Chemical. Gas. Steam. Water Page
Pibiviesse High Performance Control Ball Valve
Pibiviesse High Performance Control Ball Valve Sizes 2 to 48 Pressure rating up to ANSI 2500# Anti-cavitation and low noise trim available High turndown High rangeability Unique self-cleaning effect Single
SV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
BSA6T and BSA64T Stainless Steel Bellows Sealed Stop Valves Installation and Maintenance Instructions
1843950/3 IM-P184-03 ST Issue 3 BSA6T and BSA64T Stainless Steel Bellows Sealed Stop Valves Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation
Si C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
RESILIENT SEATED GATE VALVES FOR WATER & WASTEWATER INDUSTRY RESILIENT SEATED GATE VALVES & AWWA BUTTERFLY VALVES
RESILIENT SEATED GATE VALVES & AWWA BUTTERFLY VALVES For Water Wt And Ad Wastewater t Industry 1 2 RESILIENT SEATED GATE VALVES FOR RESILIENT SEATED GATE VALVES 3 Company Profile Vahn-Tech International
756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
Materials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
Spirax SafeBloc TM DBB3 Double Block and Bleed Bellows Sealed Stop Valve. 1. Safety information. 2. General product information. 3.
1849050/3 IM-P184-09 ST Issue 3 Spirax SafeBloc TM DBB3 Double Block and Bleed Bellows Sealed Stop Valve Installation and Maintenance Instructions 1. Safety information 2. General product information 3.
AVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
VESSEL & REACTOR VALVES. VS Series SPRAY & RINSE VALVES PROCESS VALVES
VS Series VESSEL & REACTOR VALVES SPRAY & RINSE VALVES PROCESS VALVES CLEANING VESSELS OR REACTORS WITHOUT OPENING TO ATMOSPHERE Spray & Rinse Valves Code: VRR-VRS Automatic models use an electric or air
M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
Company Profile.. About Sammi Machinery
Company Profile.. About Sammi Machinery What is Line Blind Valve? Line blinding has been used to pipe lines in various indutries wherever either positive shut-off is most concerned or full flow should
PV4 and PV6 Piston Valves
1181250/1 IM-P118-05 ST Issue 1 PV4 and PV6 Piston Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Operation 6.
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
2 I All-Flo Pump Co.
2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix PRODUCT SERIES PUMP SIZE FLUID CONNECTI INTERM INNER CHAM ON TYPE FLUID C HAMBER MANIFOLDS EDI A TE/ BER O-RINGS VAL VE SEAT VALVE/BAL
Welcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
INSTRUCTIONS AND MAINTENANCE MANUAL SERIES: K
INSTRUCTIONS AND MAINTENANCE MANUAL 05/09/2014 SERIES: K cmo@cmo.es http://www.cmo.es Page 1 ASSEMBLY DESCRIPTION Machinery Directive: DIR 2006/42/EC (MACHINERY) Pressure Equipment Directive: DIR 97/23/EC
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
Eaton Filtration, LLC
Eaton Filtration, LLC 900 Fairmount Avenue, Elizabeth, NJ 07207 Phone: 908-787-1000 Fax: 908-351-7893 E-Mail: filtration@eaton.com Web: www.filtration.eaton.com Installation, Operation & Service Manual
ROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
BSA and BSAT Bellows Sealed Stop Valves Installation and Maintenance Instructions
1370050/10 IM-P137-02 ST Issue 10 BSA and BSAT Bellows Sealed Stop Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
KBV21i and KBV40i Air Actuated Boiler Blowdown Valves
4059051/1 IM-P405-48 AB Issue 1 KBV21i and KBV40i Air Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
Materials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II 306M User Manual English Version Use for company in Europe who will place the product on the market, please
M33F ISO, M33S ISO and M33V ISO Ball Valves Installation and Maintenance Instructions
BAC13365 IM-P133-65 CMGT Issue 2 M33F ISO, M33S ISO and M33V ISO Ball Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
Water. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
BCV31 DN20 - Blowdown Control Valve
4034650/8 IM-P403-37 AB Issue 8 BCV31 DN20 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Flow
6500 KNIFE GATE VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for 2" through 30" stainless steel and stainless steel lined knife gate valves. This manual addresses hand-wheel
Materials : Forged carbon steel A105N
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Socket Welding -29 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising stem (OS&Y) Welded bonnet Full bore
Industrial Valves and Automation
Industrial Valves and Automation Prodim is the preferred supplier of over 20 leading European valve brands Our customers rely on Prodim for quality products, on-time delivery and product know-how 2 prodim.biz
ADVANTAGES DESCRIPTION MECHANICAL FITTINGS AND DIMENSIONS
03304 Float Gauge: Level measurement Application: LNG tanks Level 03304 E 1 ADVANTAGES - High level accuracy - Local mechanical counter read out. - High reliability - Suitable for 12 and 8 still well.
BERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection
1170850/1 IM-P117-36 ST Issue 1 MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1. Safety information 2. General product information
3" 24" 80A 600A DN80 DN600 Body size The largest size manufactured : 60" (1500A) Disc form Damper type Trim materials Trim treatment
STANDARD SPECIFICATION SS-CE-600B-A JUL. 2004 600B Disc Damper Type Butterfly Valve GENERAL 600B STANDARD SPECIFICATIONS BODY Series 600B This series 600B is a wafer type butterfly valve, designed to be
KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions
4059051/3 IM-P405-48 EMM Issue 3 KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
Engineering Data Sheet
Page 1 of 6 CE MARKING AND THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC Valves must be installed into a well designed system and it is recommended that the system be inspected in accordance with the appropriate
Pressure Regulating Valves. Models 44, 77 & 68 PS\ UL. Pressure Relief Valve. Dorot Fire Protection Division. Certification & compliance by design
Fire Protection Div. Dorot Fire Protection Division Models, & 6 PS\ UL Pressure Relief Valve Certification & compliance by design -PS\UL ANSI FCI - Class VI seat leakage class Fire tested to EN ISO 6-:6
KECKLEY. Installation, Operation, and Maintenance Manual. Style KGV - Knife Gate Valve
KECKLEY Installation, Operation, and Maintenance Manual Style KGV - Knife Gate Valve Table of Contents Introduction and Safety... 3 Safety message levels... 3 User health and safety... 3-4 Transportation
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
CYL KNIFE GATE VALVES San Sebastian Spain
CYL KNIFE GATE VALVES San Sebastian Spain INSTALATION, OPERATION & MAINTENANCE INSTRUCTIONS (XD HIGH PRESSURE) INTRODUCTION The CYL knife gate valve is a unique, patented, low cost, bi-directional on-off
AIR AND VACUUM VALVES
MINING DIVISION AIR AND VACUUM VALVES FOR HIGH FLOW K-6NS SERIES DESCRIPTION The K-6NS Series Air and Vacuum Valve discharges air during the filling or charging of the system and admits air into the system
Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
Manual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
DN 1/2" to 2 Female - Female BSP - 20 C C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Female - Female BSP - 20 C + 180 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Materials
Materials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Flanges RF CLASS 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Rising non rotating stem
LESER at a glance. The-Safety-Valve.com
LESER at a glance The-Safety-Valve.com Safety Valves API Series 526 Applications Refineries Chemical industry Petrochemical industry Oil and gas Onshore and Offshore Product features Valve sizes 1" through
MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
Integral type Differential pressure flowmeter VNT Series
Integral type Differential pressure flowmeter VNT Series OUTLINE VH series Wafer-Cone differential pressure flowmeter and high precision differential pressure transmitter are integrated into one flowmeter.
Eaton Filtration, LLC
Eaton Filtration, LLC 900 Fairmount Avenue, Elizabeth, NJ 07207 Phone: 908-787-1000 Fax: 908-351-7893 E-Mail: filtration@eaton.com Web: www.filtration.eaton.com Installation, Operation & Service Manual
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL Index 1. List of components / General arrangement 2. Description 3. Handling 4. Installation 5. Actuators / Operation 6. Maintenance a. Changing
Ductile iron gate valve PN16. BS EN 1171:2002 PN16
gate valve PN16. BS EN 1171:2002 PN16 V950 Gate valve Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode Price ( ) ex VAT DN50 V950 1 0 15510 5022050210906 233.60 DN65 V950 1 0 15511 5022050211262 233.60
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
2 I All-Flo Pump Co.
2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix Pump Dimensions A B C D F H I J K L P300 18.90" 22.83" 31.50" 3.94" 15.28" 27.17" 1.57" 2.95" 15.55" 19.49" (480 mm) (580 mm) (800 mm)
INSTRUCTIONS AND MAINTENANCE MANUAL SERIES: FK
INSTRUCTIONS AND MAINTENANCE MANUAL 04/09/2014 SERIES: FK cmo@cmo.es http://www.cmo.es Page 1 ASSEMBLY THE FK VALVE COMPLIES WITH THE FOLLOWING: Machinery Directive: DIR 2006/42/EC (MACHINERY) Pressure
Bray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning
SOFT SEAL PISTON VALVES
DV & VL SERIES VESSEL & REACTOR VALVES SOFT SEAL PISTON VALVES PROCESS VALVES SERIES DV, STANDARD RANGE Original Strahman Ram-Type Drain Valve FEATURES Quality System Registered to ISO 9001:2008 Certificate
FLANGED MULTI-PORT BALL VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
ASTRA - DRY PIPE VALVES GROOVE/GROOVE
WORLDWIDE - SELLING OUR PRODUCTS IN OVER 20 COUNTRIES ASTRA - DRY PIPE VALVES GROOVE/GROOVE 4" / DN100 Document includes technical information for : ASTRA Dry Pipe Valves model E Trim configuration UL/cUL/FM
ISO 9001:2000 Certifi ed Certifi cate No. C By-Pass Pigging Valves
ISO 9001:2000 Certifi ed Certifi cate No. C2007-01814 By-Pass Pigging Valves Carbon Steel - Alloy Steel - Stainless Steel Advantages over fabricated trap systems include: The simple design is easier to
VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 Pressure Reducing Valve PRV44 - Operation and Installation - 1 - manual PRV44-16-ENG JULY 2016 INDEX PAGE 1 IDENTIFICATION PLATE
PENBERTHY SUBMERSIBLE AUTOMATIC SUMP DRAINER INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood. PRODUCT WARRANTY Emerson warrants its Penberthy products as designed and manufactured to be free of defects in the material
E N G I N E E R E D V A L V E S. GROVE G4N Through Conduit Gate Valve GROVE
G4N Through Conduit Gate Valve TABLE OF CONTENTS G4N THROUGH CONDUIT GATE VALVE FEATURES AND BENEFITS The Company 1 General Information 1 Design Features 2 Optional Features 5 Special Applications 7 Material
MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
6301 TYPE CAST IRON SAFETY VALVES
Pressure (bar) 6301 TYPE CAST IRON SAFETY VALVES FEATURES The 6301 type safety valve is a device designed to protect installations against possible overpressure. It operates automatically and closes when
RAIMONDI. 3-way globe valve for feedwater heater outlet bypass Installation and Maintenance Instructions
RAIMONDI Index Introduction 1 1. Verification upon receipt and storage before installation 1 2. Handling 1 3. Installation 2 4. Scheduled maintenance 2 5. Possible damage and relevant solutions 3 6. Disassembly
A3S Bellows Sealed Stop Valve Installation and Maintenance Instructions
1326050/3 IM-P132-11 ST Issue 3 A3S Bellows Sealed Stop Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning 5 Operation
Un-Pressurized Orefice Fittings FIO EZ. Parts List and Operation Instructions TECHNICAL MANUAL. Dn 2-6 Class Lbs
Un-Pressurized Orefice Fittings FIO EZ Parts List and Operation Instructions TECHNICAL MANUAL Dn 2-6 Class 150-600 Lbs US US 2 FIO EZ - MT 108-US - 05-2016 FIO EZ Important Instructions US Pietro Fiorentini
FPD175 Compact orifice carrier assembly
ABB MEASUREMENT & ANALYTICS OPERATING INSTRUCTION FPD175 Compact orifice carrier assembly The smart solution for remote applications. Measurement made easy Installation, commissioning and operating / maintenance
SAFE/REYCO. More than 35,000 variations in DIN EN and ASME. NEW! Now with zero leakage in combination with SHR premium soft seal* (now up to +220 C)
NEW! Now with zero leakage in combination with SHR premium soft seal* (now up to +220 C) SAFE/REYCO More than 35,000 variations in DIN EN and ASME * Steam / Hot Water Resistance SAFE Full-lift safety valve
Regulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
595-K/L and 596-K/L Series Self Operated Valves Installation and Maintenance Instructions
3.575.5275.200 CH Issue 3-2016 595-K/L and 596-K/L Series Self Operated Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Maintenance
DCV6 Disc Check Valve
1342050/6 IM-P134-22 ST Issue 6 DCV6 Disc Check Valve Installation and Maintenance Instructions Printed IM-P134-22 in the UK ST Issue 6 Copyright 20101 Safe operation of this product can only be guaranteed
N2 Blanketing Valve DST100 / DST200 TYPE INSTRUCTION MANUAL CONTENTS K.S.P.C. General Description Operation. Installation Maintenance
DST100 / DST200 TYPE N2 Blanketing Valve INSTRUCTION MANUAL CONTENTS General Description Operation Installation Maintenance K.S.P.C 488-1 Wolha-ro, Tongjin-eup, Gimpo-si, Gyeonggi-Do, Korea Tel : +82-31-998-3825~7
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
Normal Safety Valves with spring loading. (AN) Model 295 and 296
GB-1 EN Model 295 Model 296 Thread connection Flange connection The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is
PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Serie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E
Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The
L21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
M10HTi ISO Tobacco Ball Valve Screwed, SW, BW and Flanged versions
IM-P133-75 ST Issue 1 M10HTi ISO Tobacco Ball Valve Screwed, SW, BW and Flanged versions Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
DCV10 Stainless Steel Disc Check Valve for use with Condensate Pumps
6018050/1 IM-P601-33 ST Issue 1 DCV10 Stainless Steel Disc Check Valve for use with Condensate Pumps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
Pressure Reducing Valves Pressure Reducing with. Broady Flow Control. D Series Range. Pressure Reducing Valves. Broady Flow Control
Pressure Reducing Valves 00 Pressure Reducing with Broady Flow Control D Series Range Pressure Reducing Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer,
Flanged pressure reducer/stabilizer VRCD
Flanged pressure reducer/stabilizer VRCD 2 This unit reduces and stabilizes the upstream pressure by operating on its load losses with a constant downstream pressure irrespective of the rate of flow value.
INSTALLATION, OPERATING & MAINTENANCE MANUAL WATER DRAIN VALVE
INSTALLATION, OPERATING & MAINTENANCE MANUAL WATER DRAIN VALVE Contents 1 Introduction 1. Introduction... 3 2. Specification... 4 3. Installation... 7 4. Operation...11 5. Maintenance...14 This Water Drain
Pressure regulating valves Types OFV, OFV-SS
Data sheet Pressure regulating valves Types OFV, OFV-SS OFV are angle-way pressure regulating valves, which have ajustable opening pressure and cover the differential pressure range ( P): 2-8 bar (29 116
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
WKM Model 320F Floating Ball Valve
Date: 4 WKM Model 320F Floating Ball Valve Installation, Operation, and Maintenance Manual 1 Date: 4 All the information contained in this manual is the exclusive property of Cameron. Any reproduction
KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
CV3000 Series Pressure Balanced High-Pressure Cage type Control Valves
OVERVIEW CV3000 Series Pressure Balanced High-Pressure Cage type Control Valves Model HPC Model HPC Pressure balanced high-pressure cage type Control Valves are design for high temperature, high pressure
APCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A
APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air