ASSEMBLY INSTRUCTIONS

Transcription

1 TM MODEL: VM Innovations ASSEMBLY INSTRUCTIONS ATTENTION DO NOT RETURN TO THE STORE Contact MD Sports Customer Service * For additional resources and Frequently Ask Questions, please visit us at themdsports.com

2 LIMITED 90 DAYS WARRANTY This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools. The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or neglect. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to another. A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all requests for warranty service, please feel free to contact our Consumer Service Department at : WEBSITE: Please be aware of your product s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle the product which is out of product s limited warranty since we only provide available parts. Thank you! PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE. STAPLE YOUR RECEIPT HERE NOTICE! - Please leave your name, address, model number and parts needed on the answering machine if there is no attendant. Failure to do so will result in a delay in shipping parts to you. 2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly. For questions that may arise or for missing/damaged parts, please contact us.

3 ASSEMBLY TIPS - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid damage and injury. For the assembly, at least two adults are required. 2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each assembly step. IMPORTANT NOTICE! - This product is intended for indoor use only. 2 - Please do not sit, climb or lean on the product. 3 - Please Do Not drag the product when moving it in order to avoid damaging the legs. 4 - Please only use spray furniture polish to clean the exterior surfaces of the product. 5 - This is not a child's toy, adult supervision is required for children playing this game. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. WARNING: Adult Assembly Required. WARNING: CHOKING HAZARD -- This item contains small parts or / and small balls.not suitable for children under 3 years. X 2 Strong adults needed No children in assembly area Keep away from pets Do not use or keep product outdoors. For indoor use only. No wet/humid conditions. 2

4 PARTS LIST x6 x4 x2 x2 Tube - Φ25.4x698mm Tube - 2 Φ25.4x54mm Tube - 3 Φ25.4x584mm Tube - 4 Φ25.4x550x60mm x4 x2 x2 x2 Tube - 5 Φ25.4x464mm Tube - 6 Φ25.4x349mm Tube - 7 Φ25.4x206mm Tube - 8 Φ25.4x89mm x2 x x x Tube - 9 Φ25.4x550x60mm Tube - 0 Φ25.4x698mm Backboard Ball Return Net x4 x x6 x6 Basketball 5 Dia. Air Pump Straight Connector T Connector 7 8 x8 x7 3 Way Connector Velcro PRE-INSTALLED PARTS P P2 P3 x2 x x2 Rim Net Electronic Scorer Rim with Paddle 3

5 ASSEMBLY INSTRUCTIONS:. Find a clean, level place to begin the assembly of your Basketball Game. We recommend that two adults work together to assemble this basketball game. 2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts list above. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface. FIG. 7 X 2 2 X X X FIG. 3. Attach tubes (#, #2) with connectors (#5, #7) as shown in FIG. 3 X 2 5 X 4 FIG X FIG.2 4. Attach tubes (#3, #5) with connectors (#5) as shown in FIG 2. 4

6 8 X 2 6 X 2 FIG FIG.3 5. Attach tubes (#8) with T connectors (#6), as shown in FIG 3. 0 X 7 X 2 FIG FIG.4 6. Attach tube (#0) with connectors (#7) as shown in FIG 4. 5

7 X 3 6 X 2 7 X 2 6 X 4 7 X FIG.5 7. Attach tubes (#,# 6, #7) with connectors (#6, #7) as shown in FIG 5. 6

8 4 X 2 9 X 2 5 X FIG.6 8. Attach tubes (#4, #9) with connectors (#5) as shown in FIG 6. 7

9 X 8 X FIG.7 9. Attach the Backboard (#) to the Tubes using three Velcros (#8) as shown in FIG. 7 and 7A. 8

10 X 2 X 2 2 FIG.8 0. Slide velcro strap of Ball Return Net (#2) to the mainframe (pre-installed). See FIG. 8 and 8A.. Slide the Tube (#) in front of the Ball Return Net (#2). See FIG. 8 and 8B. 9

11 8 X 4 P X 2 P2 X P3 X 2 P2 P3 8 P 2 FIG.9 2. Attach the Ball Return Net (#2) to the Tubes using four Velcros (#8) as shown in FIG. 9 and 9A. 0

12 Timer OR Game Mode Display Player Score Player 2 Score On/Off Start Button Select/Sound On Off Button How To Play. Press the ON/OFF button; the display will show G. 2. Press the SELECT/ SOUND ON/OFF button to change game modes, from G to G To switch between game modes after the game is turned on, press the SELECT/SOUND ON OFF button. 4. Once the game mode is selected, for example G, press the ON/OFF/START button to begin play. 5. To turn the sound off, press and hold the SELECT/SOUND ON OFF button for approximately 3 seconds. To turn the sound back on, repeat. Game Modes G : Single Player, One Hoop. Player must score only on the Home hoop.. 2 points are counted for every shot made on the Home hoop only.. Unlimited time, Maximum score:00 G 2: Single Player, Any Hoop. Player must score on HOME or VISITOR hoop.. 2 points are counted for every shot made on either hoop.. Unlimited time, Maximum score:00 G 3: Single Player, Alternating Hoop. Player must score on alternating hoops. For example: score on HOME, score on VISITOR, score on HOME, score on VISITOR, etc.. 2 points are counted for every shot made on the correct hoop.. Unlimited time, Maximum score:00 G 4: Two Player, Count Up. Each player must score on their own hoop - HOME or VISITOR.. 2 points are counted for every shot made.. Time is preset to one minute.. The winner is the player who scores the most points in one minute on their own hoop. G 5: Two Player, Count Down. Each player must score on their own hoop - HOME or VISITOR.. Each player starts with 20 points and 2 points are deducted for every shot made in their own hoop.. There is no time limit.. The winner is the player who gets to zero, or scores 0 shots, first. G 6:Two Player, Match Play. There are 20 games in a match. Each game lasts for 5 seconds.. Each player must score on their own hoop - HOME or VISITOR.. The player that scores first on their own hoop during each 5 second game receives 2 points.. Only one score is counted for each 5 second game.. The winner is the player with the most points at the end of the 20 game match.

13 G 7: Two Player, Pro-Match Play. There are 2 games in a match. Each game lasts for 5 seconds.. Each player must score on their own hoop - HOME or VISITOR.. In games -3 and 7-9, the player that scores first on their own hoop receives 2 points. Only one score is counted per game.. In games 4-6 and 0-2, the player that scores first on their own hoop receives 3 points. Only one score is counted per game.. The winner is the player with the most points at the end of the 2 game match. G8 :Two Player, Any Hoop, 0 scores in 99 seconds.. Time limit is 99 seconds.. Maximum score is 0 points.. Each player scores 2 points on either the Home or Visitor hoops.. Player plays until either 0 points have been scored or 99 seconds have elapsed, then Player 2 starts their game.. The player to have scored 0 points in the quickest time is the winner. The Electronic System goes into sleep mode after 3 minutes of inactivity. P2 A2! WARNING: ) Requires 3 AAA batteries (not included). 2) Do not mix old and new batteries. 3) Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium) batteries. Battery Installation Battery Box: Unscrew the bolt using a screwdriver and open the battery box. Insert 3 AAA batteries ( not included) in the order of polarity as shown on the inside cover. Then close the cover using a screwdriver. Turn the power ON using the ON/OFF switch. Reminder: a. Batteries must be installed according to the correct polarization (+ and -) required. b. Please clean the battery contacts and also those of the device prior to battery installation. c. If the game will not be used for a long period of time, we recommend that the batteries should be removed. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/tv technician for help. YOU ARE NOW READY TO PLAY! (The last page) 2