TOPSLOT End Mill and Modular Type Expansion
|
|
- Millicent Arnold
- 6 years ago
- Views:
Transcription
1 1/10 TOPSOT End Mill and Modular Type Expansion
2 2/10 TOPSOT End Mill and Modular Type Expansion FEATURES Insert features ➊ Robust insert design for tangential slotting by 4 corner cutting edges (2 right/ 2 left) ➋ Ground insert for precision cutting ➌ Strong clamping credit to insert bottom face s unique concave shape ➍ Dovetail shape of insert s cutting edges designed for strong machining power ➍ ➋ ➊ 4 true cutting edges ➌ Cutter features Full slotting line now available: end-mill, face-mill and modular type Standardization: 3mm-6mm width with 1mm steps ➊ ➋ ➊ Adapt coolant hole for various material and better chip evacuation ➋ Cutter s protrusion screw hole secures the maximum number of threads enabling stable clamping Notice: Available as a custom tailored item (Special diameter & Special width of cut) Taegutec has expanded the TOPSOT family of cutters and inserts to provide end-users a comprehensive machining range for slotting. The line now includes both end-mills and modular type cutters designed for slotting from 3mm-6mm in an extended range of cutter diameters-25mm to 63mm-enabling higher productivity. A new tangential insert with true 4 cutting edges and a positive chip former deliver longer tool life and economy. An additional advantage is the cutter body through coolant system allowing for adaptability to work piece conditions.
3 Application 3/10 ottom circular groove ottom deburring Circular groove Internal circular groove Straight groove T-Slot TOPSOT cutter designation TSM D32-04-W16-S23 TaeguTec slot mill Diameter Slot width Insert size TOPSOT insert designation SOT W: Weldon shank M: Modular thread Insert thickness Cutter Selection Width(mm) Insert Cutter type Corner R or C (Example)04=R0.4 08=R0.8 (Tailor-made) C05=45 x0.5 chamfer (Tailor-made) Cutter diameter (mm) Figure 3 SOT SOT 023 End mill Modular End mill Modular Insert 5 SOT 028 End mill Modular End mill type 6 SOT 033 End mill Modular Modular type
4 Insert r 4/10 idth of cut) 5 D Designation Ts D3 (width of cut) 5 d Ts r Dimension (mm) Grade Application d d1 t r TT9080 TT8080 TT6080 Cutter SOT TSM...S18 d1 D3 d d1 SOT TSM...S23 (width of cut) SOT TSM...S28 f cut) SOT TSM...S33
5 1 End mill type D (width of cut) 5 D3 d r d1 5/10 Ts 1 (width of cut) TSM D - -W -S Designation Insert Dimension (mm) D d TSM D25-03-W12-S Y TSM D32-03-W16-S Y TSM D40-03-W16-S18 SOT Y TSM D50-03-W20-S Y TSM D63-03-W20-S Y TSM D25-04-W12-S23 TSM D40-04-W16-S23 SOT Y Coolant Y TSM D32-04-W16-S Y TSM D50-04-W20-S Y 1 TSM D63-04-W20-S Y TSM D25-05-W12-S Y 1 TSM D32-05-W16-S Y TSM D40-05-W16-S28 SOT Y TSM D50-05-W20-S Y TSM D63-05-W20-S Y TSM D25-06-W12-S Y TSM D32-06-W16-S Y TSM D40-06-W16-S33 SOT Y TSM D50-06-W20-S Y TSM D63-06-W20-S Y Screw TS 25024I/G TS 25031I/G TS 25042I/G TS 25053I/G Components Designation Wrench -wrench TSM S18 TSM -04 -S23 TSM -05 -S28 TSM -06 -S33 TD7P -T7P
6 Moudular 1type 6/10 r 1 D Ts D3 d d1 TSM D- - -M -S Designation Insert TSM D25-03-M08-S18 Dimension (mm) D D3 5 Ts TSM D40-03-M08-S18 SOT (width of cut) Y TSM D50-03-M10-S Y Coolant Y TSM D32-03-M08-S Y TSM D63-03-M10-S Y TSM D25-04-M08-S Y TSM D32-04-M08-S Y TSM D40-04-M08-S23 SOT Y TSM D50-04-M10-S Y TSM D63-04-M10-S Y TSM D25-05-M08-S28 1 (width of cut) Y TSM D32-05-M08-S Y TSM D40-05-M08-S28 SOT Y 1 TSM D50-05-M10-S Y TSM D63-05-M10-S Y TSM D25-06-M08-S Y TSM D32-06-M08-S Y TSM D40-06-M08-S33 SOT Y TSM D50-06-M10-S Y TSM D63-06-M10-S Y 5 Screw TS 25024I/G TS 25031I/G TS 25042I/G TS 25053I/G Components Designation Wrench -wrench TSM S18 TSM -04 -S23 TSM -05 -S28 TSM -06 -S33 TD7P -T7P
7 1 Moudular type 7/10 r 1 D Ts D3 d d1 TSM D- - -M -S Designation Insert TSM D25-03-M08-S18 Dimension (mm) D D3 5 Ts TSM D40-03-M08-S18 SOT (width of cut) Y TSM D50-03-M10-S Y Coolant Y TSM D32-03-M08-S Y TSM D63-03-M10-S Y TSM D25-04-M08-S Y TSM D32-04-M08-S Y TSM D40-04-M08-S23 SOT Y TSM D50-04-M10-S Y TSM D63-04-M10-S Y TSM D25-05-M08-S28 1 (width of cut) Y TSM D32-05-M08-S Y TSM D40-05-M08-S28 SOT Y 1 TSM D50-05-M10-S Y TSM D63-05-M10-S Y TSM D25-06-M08-S Y TSM D32-06-M08-S Y TSM D40-06-M08-S33 SOT Y TSM D50-06-M10-S Y TSM D63-06-M10-S Y 5 Screw TS 25024I/G TS 25031I/G TS 25042I/G TS 25053I/G Components Designation Wrench -wrench TSM S18 TSM -04 -S23 TSM -05 -S28 TSM -06 -S33 TD7P -T7P
8 T-Slot cutter ORDER MADE PRODUCT 8/10 1 (width of cut) 1 Tool Insert Dimension (mm) D d1 d 1 TSM D21-09-W20-XO06 XOMT TSM D25-11-W25-XO06 XOMT TSM D32-14-W32-SP09 SPMT EM TSM D40-18-W32-AP12 APKT 1204 PER/-EM TSM D50-22-W32-AP12 APKT 1204 PER/-EM These cutters are considered tailor-made items To meet various working condition and customer's request, the special designed T-Slot cutters with current standard milling inserts will be supplied as order made items. ed plate
9 T-Flextec assemble program 9/10 T-Flextec Adaptor CA-M (Reducer) Tool CA-M-M (Extension) DIN CA-M (Reducer) CA-M-M (Extension) SK CA-M (Reducer) CA-M-M (Extension) T MAS CA-M (Reducer) CA-M-M (Extension) C-ADAPTOR STRAIGT SANK
10 Recommended cutting conditions 10/10 Material rinell Speed (m/min) Grades Feed (mm/tooth) ow Carbon Steel TT9080, TT igh Carbon Steel TT9080, TT Alloyed Steel TT9080, TT Tool Steel TT9080, TT Stainless 300 Series TT8080, TT Stainless 400 Series TT9080, TT igh-temp Alloy TT8080, TT Inconel TT8080, TT Titanium Alloy TT8080, TT Gray Cast Iron TT Nodular Cast Iron TT Recommended cutting conditions are just for reference. If machine rigidity, workpiece clamping, or overall length is not ideal these cutting conditions should be altered accordingly.
Insert and Holder Line Expansion
1/13 an Holer Line Expansion 2/13 an Holer Line Expansion TaeguTec has expane its stanar line of FINEBALL inserts an holers with a variety of steel shanks, carbie shanks as well as moular hea types. The
More informationANGULAR ADVANTAGE WITH VARIOUS TIP STYLES ON A SINGLE SHANK
ANGULAR ADVANTAGE WITH VARIOUS TIP STYLES ON A SINGLE SHANK Tip Style: Spot, C Sink & Chamfer (Front & Back) s 18, 30, 45, 50 & 60 s.31"-1.00" Adaptions T05, T06, T08, T10, T12, T15 Materials Steel, Stainless
More informationMilling Cutters & Saws
Milling s & Saws Side Milling s High Speed Steel Plain & Tooth Plain 2 1/2 3/16 14 603220 2 1/2 1/4 14 603221 2 1/2 5/16 14 603222 2 1/2 3/8 14 603223 2 5/8 3/16 14 603224 2 5/8 1/4 14 603225 2 5/8 5/16
More informationHigh Feed Milling Cutter Family Offers Increased Productivity!!
Cutter Series: 1TG1F TG1F Insert Series: UNLU0603MOTR UNLU0603MOTR-MM UNLU0603MOTR-ML Insert Grades: IN2035 IN2504 IN2505 IN2510 IN2530 IN7035 Applications: Die & Mold Aerospace General Purpose High Feed
More informationUPDATE. Hi-Feed Cutter 09mm IC Insert Series. Increased Depth of Cut! Features & Benefits include: Insert Series: UNLU0904. Face Mills: TG1G TG2G
Hi-Feed Cutter 09mm IC Insert Series Insert Series: UNLU0904 Face Mills: TG1G TG2G End Mills: 1TG1G Insert Grades: IN2505 IN2530 IN2035 IN7035 Applications: Die & Mold Aerospace General Purpose UPDATE
More informationHF SC 1000 / 3 HF SC 25 / 3 HF SS HF SS
High Feed Indexable Milling Program Tool Contents HFSC Modular Screw-on Heads 54/55 HFA Shell Milling Cutters 54/55 HFSS End Milling Cutters 54/55 Insert Data 56/57 Cutting Conditions Data 58/65 Inch Section
More informationHigh Feed Indexable Milling Program Tools
High Feed Indexable Milling Program Tools With new five- and six-axis CNC grinding technology, Millstar has been able to create some of the most sophisticated and complex geometries in use today. With
More informationAdjustable Broaching Head 3. Fixed Braoching Heads 4. Broaching Bits Hexagonal 5. Broaching Bits Square 6. Broaching Bits Torx 7
Rotary Broaching Heads & Accessories The Broaching Toolholder is a device that enables the processing of regular shapes (hexagons, squares etc.) in through and blind holes. The Broaching Tool is inclined
More informationQuality Cutting Tools Carbide Tipped Solid Carbide 2009
Quality Cutting Tools Carbide Tipped Solid Carbide 2009 Keyseats Counterbores End Mills Drills Reamers INDEX BY NAME 2 INDEX OF PRODUCTS PAGE SHANK CUTTERS Chamfer Cutters 17 Corner Rounding Cutters 18
More informationOperating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
More informationEZBar. Kyocera s Easy Adjustment Bar for Small Internal Machining. Easy Adjustment and High Precision. Smooth Coolant Supply MEGACOAT PR1225
Kyocera s Easy Adjustment Bar for Small Internal Machining Easy Adjustment and High Precision The EZ Bar prevents deviation with highrigidity clamping Smooth Coolant Supply EZ Bar design provides a smooth
More informationfor the machining of steel materials aggressive cutting speeds and improved tool life reduced cycle times and improved hole quality RT 100 S
for the machining of steel materials aggressive cutting speeds and improved tool life reduced cycle times and improved hole quality RT 100 S STEEL MACHINING P Strong in steel RT100 RT 100 S was developed
More informationSERIES 3000 SERIES 3000 SWISS MADE EN-ID-1017
SERIES 000 SERIES 000 EN-ID-7 SWISS MADE BEST SOLUTION IN STAINLESS STEELS AND SUPER ALLOYS Chip evacuation Ø 0. -. mm SERIES 000 Double performance VX COATED Process security Ø. - 0 mm No sticking PERFORMANCE
More informationTQ Chipbreaker NEW. Increase Productivity with Improved Chip Control. Threading Insert with Molded Chipbreaker
hreading with Molded Chipbreaker hreading with Molded Chipbreaker Increase Productivity with Improved Chip Control table Chip Control Low Cutting orce and uppressed Vibration Improved ool Life with New
More informationTOOLS NEWS B204G. Long shank straight drill SD-LS. Long shank type prevents troubles for overhang application.
Long shank straight drill TOOLS NEWS B24G Long shank type prevents troubles for overhang application. Long shank straight drill Do you have any troubles drilling a deep hole? Have you had any troubles
More informationRoloc Disc Selection Guide
Roloc Disc Selection Guide Application Metal Type Disc Product 361F 461F 777F 963G 977F Attachment System TP TSM TS TSM Grinding Light Grinding Blending Deburring Finishing Cleaning Stainless Steel Aluminum
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationSpecially Designed for Maximum Speeds and Feed Rates
Specially Designed for Maximum Speeds and Feed Rates VARIABLE INDEX, DUAL HELIX AVAILABLE IN 4 AND 5 FLUTE DESIGNS In aerospace engineering, the maximum dynamic pressure or max Q, is the point at which
More informationVarious applications are available with multi-functional cutters. The long edge is for deep depth of cuts and more MRR.
Various applications are available with multifunctional cutters Alpha Mill The long edge is for deep depth of cuts and more MRR. The Alpha mill series lineup makes high feed and deep depth of cut machining
More informationINSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)
INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationOperating instruction for the quick-change tap holders type:
type: KSN 1 / IKZZ / MMS KSN 3 / IKZZ / MMS KSN 4 / IKZZ / MMS Date of edition: 01.02.2008 Stage of alteration: 2 Please keep this for future use Contents: 1 Application range, safety instructions and
More informationMASTER CATALOG. NEW Beyond UJDE HARVI III Carbide End Mills Inch in KCSM15. Diameter Expansion!
MASTER CATALOG NEW Beyond UJDE HARVI III Carbide End Mills Inch in KCSM15 Diameter Expansion! HARVI III High-Performance Solid Carbide End Mills Primary Application HARVI III takes high-performance profiling,
More informationINSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)
INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationOD plug gauge. for bores and internal profiles from dia. 2,5 mm. OD plug gauge in open design. Special designs Accessories. OD plug gauge for various
OD plug gauge for various bore diameters Cross sleeve Cross sleeve with runners OD plug gauge for bores and internal profiles from dia. 2,5 300 Oskar Schwenk GmbH & Co. Esslinger Straße 84 70736 Fellbach
More informationAvantop KC1.1/ KC2.2 FACE MILLING CUTTER
Avantop KC1.1/ KC2.2 < universally applicable for cast iron and steel < very good surface quality by plain cutting < additional security due to the wedge system Avantop KC1.1 Avantop KC2.2 24 It's all
More informationSTAINLESS STEEL BAFFLES VITON O-RING CHARACTERISTICS
BAFFLES RAPID PLUG AND UNPLUG SYSTEM (PATENTED SYSTEM) : RL-..F T +0,5 0 45 L L1 B -0,1-0,2 Ø A +0,1 0 S Ø A -0,1-0,2 STAINLESS STEEL BAFFLES VITON O-RING ØA B T S L1 L RL-6F 6 6 0,7 1 7,5 100 200 300
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationseries Insert for Threading
Great roductivity Improvement series for ing he high precision mold technology High quality, Long tool life and Cost efficient ipe ipe apered apered Metric New! 61 Unifide Whitworth arallel ipe ipe descriptions
More informationRecommended Cutting Conditions
Recommended Cutting Conditions y Cutting peed o. Breaker Cutting peed or Dierent Grades vc (F) 6120 V15TF 6130 2 655 (560 785) 590 (490 720) 525 (425 655) 2 180 350B 2 590 (460 720) 525 (395 655) 460 (330
More informationTHE MANUFACTURER ADVANTAGE
MICRO END MILL TOOL CATALOG Micro sized solid carbide end mills & drills THE MANUFACTURER ADVANTAGE get to know who makes your micros Melin Tool Micro Catalog»» New Micro 3 Flute Series»» Over 3000 MICRO
More informationCrossed Roller Bearings Series Crossed Roller Bearings Series:
Crossed Roller Bearings Series Crossed Roller Bearings Series: Proprietary 2V Grinding Technology 102 Crossed Roller Bearing Series: Overview High Precision Bearing Sets Proprietary 2V Grinding Technology
More informationTool Holders TRAUB TNL 18P TRAUB TNL 18. The Machine Manufacturer s Original.
Tool Holders TRAUB TNL 18P TRAUB TNL 18 The Machine Manufacturer s Original. Competence Innovation Our engineers have a wealth of experience and continuously surprise with innovative ideas. Our frequently
More informationHot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
More informationHSS. Being the best through innovation REAMERS. - HSS Hand Reamers, HSS-E Chucking Reamers
Being the best through innovation HSS Hand Reamers, HSSE Chucking Reamers SELECTION GUIDE ITEM MODEL DESCRIPTION MIN MAX PAGE K HSS HAND STRAIGHT FLUTES D.0 D0.0 9 K5 HSS HAND LH SPIRAL FLUTES D.0 D0.0
More informationHigh precision mold technology produces high quality, long tool life and cost efficiency
apered Pipe hread apered Pipe hread JCM2007021(PR1115) JCM2007053(W15) for hreading F series reat Productivity Improvement High precision mold technology produces high quality, long tool life and cost
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationSize Tube # Contour Insert Screw Peripheral Insert Screw Center Insert Screw
Size Tube # Contour Screw Peripheral Screw Center Screw 9/16-18 6 JTPCI-01 PS2.5XT07 JTO-05 S2.2XT07 JTI-05 S2.2XT07 3/4-16 8 JTPCI-02 7/8-14 10 JTO-06 S2.2LXT07 JTI-06 S2.2LXT07 1 1/16-12 12 JTPCI-03
More informationBull s-eye Levels and Screw-On Levels
Bull s-eye Levels and Screw-On Levels Technical information Definition of terms A spirit level is a hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationThank you for purchasing a WIKE BOX BIKE!
Thank you for purchasing a WIKE BOX BIKE! Contents Safety.....3 Front wheel.4 Kickstand..5 Handle Bar & Box 6 Seat post and Saddle 7 Final pre-ride check 8 Tools needed to assemble Bike: -High table or
More informationINDEXABLE DRILLING DRILLING INSERTS
INDEXABE DRIING INDEXABE DRIING DRIING INSERTS Multi-Mat TM indexable drilling solutions for general drilling needs in a variety of materials. offers a range of high quality drill bodies. Combining our
More informationProduct Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
More informationThreading tool F63 F85 F63. Stock Indications and Symbols. Threading tool
tool 63 8 tool tool External / Internal External Internal SEC- Tool Series Selection Guide...64 Basics of Threads...67 SSTE Type / SSTI Type...68 SSTE Type / SSTI Type Standard epth of Cut and Number of
More informationOPTIPOW 105 OPTIPOW 105 ; MAIN PARTS. Our Ref: PSE, Bernt Andersson
Page 1 (6) Our Ref: PSE, Bernt Andersson OPTIPOW 105 OPTIPOW 105, the compact pulse valve for the Optipulse fabric filters of different types: is a result of many years of experiences within the fabric
More informationSELECTION GUIDE REAMERS HSS SELECTION GUIDE. 2 phone: , fax: , K1143 K1153 K2101 K2111 K2121
YERM HSS REAMER SELECTION GUIDE REAMERS HSS SELECTION GUIDE ITEM MODEL DESCRIPTION PAGE K HSS Hand Reamers Straight K5 HSS Hand Reamers LH Spiral K Straight Shank Chucking Reamers Straight 5 K Straight
More informationApplication Information: carbon steel (TiN, black oxide) cast iron (TiN, black oxide) non-ferrous materials (bright)
General-Purpose Drills 118 Point Features/Benefits: General-purpose geometry for drilling in a wide range of operating conditions and materials. Manufactured from premium high-speed steel. 118 point. The
More informationSTAINLESS STEEL REVEALER
STAINLESS STEEL REVEALER 1 2 CONTENTS BOLLARDS 6-13 Toscane Bollards 7 Andria Bollards 8 Bollard options 9 Anchorage & regulations 10 Removable bollards Toscane and Andria with triangular wrench 11 Toscane
More informationHONMA BERES S/IS-06/U-06 Left-handed Model Debut!
NEWS RELEASE August, 2018 HONMA BERES S/IS-06/U-06 Left-handed Model Debut! HONMA GOLF Co., Ltd. (head office: Roppongi Hills Mori Tower 35F, 6-10-1 Roppongi, Minato-ku, Tokyo; representative director
More informationMelin Tool Micro Catalog
MICRO END MILL TOOL CATALOG Micro sized solid carbide end mills & drills Melin Tool Micro Catalog» New Micro 3 Flute Series» Over 3000 MICRO items INSIDE» Expanded manufactering facility & product line
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationGAS SYSTEM HYDRA GS. The gas installation system that sets new standards. Witzenmann GmbH
GAS SYSTEM The gas installation system that sets new standards. Witzenmann GmbH Östliche Karl-Friedrich-Str. 134 75175 Pforzheim, Germany Phone +49 7231 581-0 Fax +49 7231 581-820 wi@witzenmann.com www.witzenmann.com
More informationTechnical information for O-rings
echnical information for O-rings eal effect An O-ring is a sealing element used to reliably seal against fluids and gases. he seal effect is created during installation by axial or radial compression of
More informationPrice List INDIA Magnetic Drilling Machines Broach Cutters / Annular Cutters Beveling Machines Accessories.
List INDIA-2015 Magnetic Drilling Machines Broach Cutters / Annular Cutters Beveling Machines Accessories www.bds-machines.com Simply Better Drilling Cutters manufacturing facility in Germany State of
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your Classic workshop compressor? Quality results can be achieved only by using
More informationPFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
More informationLock-N-Load. Bullet Feeder
Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper
More informationChuck Size. Chuck Model. Chuck Dia. 5 N N N N N
CHUCK JAWS MACHINE VISES N-200A SERIES CHUCKS-3 JAW 1.5mm x 60 Serrations Power s With Adaptor Plate IN THIS SECTION: CNC Lathe s...66-72 Hydraulic s...73 Manual/Scroll s...74-86 Collet s...87-92 Live
More informationNEWS RELEASE. No SP69 Release date: October 17, 2011
NEWS RELEASE No. 2011-SP69 Release date: October 17, 2011 SRI Sports Introduces the New XXIO7 Ladies Series Faster head speed for greater distance, providing a more satisfying swing for the players, psychologically
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationT H E G E O R G E W H A L L E Y C O M P A N Y w w w. c o o l a n t f e d t o o l i n g. c o m
Solid Steel Stop Screw Note: When coolant-thru-the-tool is not necessary, these screws can also be used as a standard Backup or Adjusting Screw no. 101-001 855-001 3/4-16 L.H. 101-002 855-002 13/16-16
More informationDunlop Sports Introduces the New XXIO Prime Longer ball flight even with lower head speed
No. 2012-SP84 Issued: October 18, 2012 Dunlop Sports Introduces the New XXIO Prime Longer ball flight even with lower head speed Dunlop Sports Co. Ltd. (Head office: Kobe, Japan; President: Yasushi Nojiri)
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationNEWS RELEASE. HONMA BERES S-06 series/u-06 Debut! January, 2018
NEWS RELEASE HONMA BERES S-06 series/u-06 Debut! January, 2018 HONMA GOLF Co., Ltd. (head office: Roppongi Hills Mori Tower 35F, 6-10-1 Roppongi, Minato-ku, Tokyo; representative director & president:
More informationProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO
P# 0 DRILL 1/4" DIA. X.20 DP. (4) EQUALLY SPACED ON A.530 DIA. B.H.C. 1.625 DIA 1/8" SLOT X.05 DEEP (2).6875 RAD.5625 RAD.5962 Events ID On Print 10 Points.1875 Tool List 10 Points Events ID On Print Plot
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationACO External Drainage
ACO External Drainage ACO DRAIN PowerDrain Line S100K 4" internal width, iron edge channel S200K 8" internal width, iron edge channel S300K 12" internal width, iron edge channel ACO DRAIN ACO Drain is
More informationNOAH FAST. frame passport
frame passport Type: 7DC last update: /08/05 INDEX 0. UPDATES... 3. GENERAL... 3.. Description... 3.. Part codes... 3. MATERIAL... 3 3. WEIGHT... 3 3.. Frame... 3 3.. Fork... 3 4. GEOMETRY... 4 5. CABLE
More informationPlumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationStainless Steel Straps
Stainless Steel s Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature,
More informationG238. G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable. Features
G238 G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable The G238 features a unique modular design enabling it to expand to a variety of test scenarios from a standard 3 point bend test to 4 point
More informationUltRo Dual Flow Reverse Osmosis Water System
UltRo Dual Flow Reverse Osmosis Water System Congratulations on this great investment to your health. **IMPORTANT NOTE BEFORE YOU BEGIN** We recommend you call your local friendly plumber to ensure proper
More informationTechnical documentation OD plug gauge
Content 1 GENERAL REMARKS 4 1.1 APPLICATIONS 4 1.2 FUNCTION 4 1.2.1 CENTRING 4 1.2.2 EXPANDING PROBE 4 1.2.3 FLOATING CONTACTING 5 1.3 ADVANTAGES 5 2 CONSTRUCTION 7 2.1 OD MEASURING SLEEVE 7 2.1.1 BASIC
More informationSection GATE VALVES
Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT
More informationHigh flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit
GSW-B-AGE High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit PGN-plus / PZN-plus universal gripper with shaft interface GSW-B and AGE compensation unit
More informationNickel Alloy Fasteners Nickel Alloy Fasteners
HASM The Best of the Best Global provider of high-performance bolts, nuts, screws, studs, washers, and anchors. HASM s research and development is focused on producing an extensive range of fasteners with
More informationAging Cell, OFITE Style. Included Items
DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion fluids, and wastewater. In addition
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationTSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance
TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing
More informationMini Mr.Bulletfeeder by Double-Alpha
Mini Mr.Bulletfeeder by Double-Alpha User Manual Thank you for choosing the Mini Mr.Bulletfeeder by Double-Alpha! This newly designed product will give you years of reliable service. It will make your
More informationIndustrial cable glands
Industrial cable glands SK-EMC cable glands Cable glands of the SK-series fulfil the highest demands of quality and security. Outstanding high-grade materials are used together with innovative technology
More information40K TLX Nozzles 40K TLX
40K TLX Nozzles 40K TLX Application/Features: These nozzles are designed specifically for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. The TLX Nozzle features a special
More informationCLIMBING Pads. Straps Gaffs Spikes Hardware
CLIMBING Pads Straps Gaffs Spikes Hardware Quick Change Aluminum Climbers CTB Tree and Pole Climbing Kit Kit with straps and L pads Patented design give these climbers strength, durability and style Utilizes
More informationSelf-Aligning Cylindrical Roller Bearings. Plummer Block Housing. Series ACB, sealed on both sides. Series SLG01
Self-Aligning Cylindrical Roller Bearings Series ACB, sealed on both sides Plummer Block Housing Series SLG01 KRW Self-Aligning Cylindrical Roller Bearings sealed on both sides ACB self-aligning cylindrical
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More information3/8" Safety Cable Systems
3/8" Safety Cable Systems Ladder-Mount 3/8" Cable System (No Slider) Kits include appropriate length of aircraft cable, top and bottom support brackets, 12" tensioning turnbuckle, tension spring, and all
More informationOWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most
More informationHIGH PRESSURE NOZZLES 2010 Catalog
HIGH PRESSURE NOZZLES 2010 Catalog 10,000-40,000 PSI 690-2758 Bar Gardner Denver Water Jetting Systems, Inc. publishes various guides for the safe use of Water Blasting Equipment and also recommends that
More informationCHECK-VALVES Automatically Position Themselves by the Natural Forces of the Conveying Air. A PNEUMATIC CONVEYING SYSTEM PATENT #: 5,160,222
PATENT #: 5,160,222 PHONE: (913)677-5777 FAX: (913)677-067 E-Mail : techair@techairinc.com www.techairinc.com CHECK-KLEEN DIVERTER A PNEUMATIC CONVEYING SYSTEM FLAP-CHECKS exposed to product air stream
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationPZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes Gripping force 580 N..
PZN-plus Sizes 40.. 300 Weight 0.43 kg.. 43.5 kg Gripping force 580 N.. 38000 N Stroke per finger 3 mm.. 35 mm Workpiece weight 2.9 kg.. 190 kg Application example Insertion tool for assembling small to
More informationDPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes
DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small
More informationStandard Series Pipe Clamps Clamp Pair Selection
Standard Series Pipe lamps lamp Pair Selection Behringer s clamp pairs are available in different materials and incorporate a modular insert by group size. Standard series pipe clamps are available in
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationOFI Testing Equipment - Aging Cell Instructions Page 1 of 4. Instructions OFITE AGING CELLS
OFI Testing Equipment - Aging Cell Instructions Page 1 of 4 Instructions OFITE AGING CELLS The OFITE Aging Cell is a patented pressure vessel that enables samples to be subjected to temperatures higher
More informationSPOKES & NIPPLES FOR BICYCLE 2017
SPOKES & NIPPLES FOR BICYCLE 2017 HISTORY AND PRESENT Based in Lomagna, in the heart of Lombardy, Alpina Raggi S.p.A. was founded in 1926 and focusses its activity on the production of spokes and nipples.
More informationAutoDrill s OUTSTANDING FEATURES
PRODUCTION DRILLING & TAPPING SOLUTIONS Reduce Your Costs and Increase Your Production The Affordable, Powerful, Compact Solution AutoDrill s OUTSTANDING FEATURES Self Feeding with Air or Oil Thrust Capacity
More information