...vibration isolation. Materials Handling - Rollers

Transcription

1 ...vibration isolation Materials Handling -

2 Technical Information from Anti-Vibration Components Solid have a smooth surface and a solid body Durasoft have a smooth contact surface with teardrop holes to allow greater roller compression under load. Finned are grooved and provide selfcleaning as dirt, debris and liquid pass under the contact surface of the roller. 158 Tel: Fax: sales@avcomponents.co.uk Web: antivibrationcomponents.co.uk Anti-Vibration Components is a division of Automotion Components Ltd

3 Technical Information Standard Bearings The tables below show the maximum theoretical radius loads that can be applied to the respective bearing Bearing Type I.D. O.D. WIDTH Load (Kg) Speed (rpm) A - Standard Double B - Standard Single C - Standard Double 7.95/ / / / / / / / /19.18 With the calculations above, typical life is approximately 2500 hours Clutch Bearings Bearing Type I.D. O.D. WIDTH Load (Kg) Speed (rpm) H.3745/ / /.875 I.6245/ / /1.000 With the calculations above, typical life is approximately 1,000,000 revolutions or 500 hours. The bearings are shielded and pre-lubricated for life with grease. A clutch roller can only be used in one direction. This is determined in the ending of the part number e.g. P L Left Right from Anti-Vibration Components Tel: Fax: sales@avcomponents.co.uk Web: antivibrationcomponents.co.uk 159 Anti-Vibration Components is a division of Automotion Components Ltd

4 Technical Information from Anti-Vibration Components Base Elastomer: Neoprene Black Urethane White Nitrile Chemical Name Chloroprene Di-lsocyante Polyurethane Nitrile Butadiene Advantages Disadvantages Max. Temp Min. Temp Flame and weather resistant. Resists: Petroleum, oil, ozone & high temp. Highest abrasion resistance, strength & load bearing. High elongation, hardness. Resitance to Ozone & Oxygen. Resistant to petrolium, oil, alcohol & abrasion. Affected by phosphate hydraulic fluids, aromatic hydrocarbons. Affected by ether, esters, acid, aromatics, alkallis. Affected by degreaser solvents. Continuous 93ºC Intermittent 121ºC Continuous 93ºC Intermittent 121ºC Continuous 79ºC Intermittent 107ºC Property: White Nitrile Neoprene Urethane Tensile Strength Ozone Resistance Cut Resistance Resistance To: White Nitrile Neoprene Urethane Compression Set ASTM #1 Oil ASTM #2 Oil Reference Fuel B Ketones: MEK Aromatics: Toluene Aliphatics: Hexane Ethyl Acetate Cellosolve Methylene Chloride Trichloroethylene Diethylene Glycol Isopropyl Alcohol -40ºC -54ºC -51ºC Caustics: 10% NaOH Acids: H 2 S0 4 Excellent Good Fair Poor 160 Tel: Fax: sales@avcomponents.co.uk Web: antivibrationcomponents.co.uk Anti-Vibration Components is a division of Automotion Components Ltd

5 Technical Information Material Colours Guide: Nitrile One colour Urethane 35 Durometer (Yellow) Durability Levels 20 Durometer: Stiff Foam Rubber 60 Durometer (Blue) 35 Durometer: Pencil Rubber Top Neoprene One colour 80 Durometer (Red) 95 Durometer (Orange) 60 Durometer: Car Tyre 80 Durometer: Skateboard Wheel from Anti-Vibration Components 90 Durometer: Hockey Puck Tel: Fax: Web: antivibrationcomponents.co.uk 161 Anti-Vibration Components is a division of Automotion Components Ltd

6 Durasoft Roller roller only & Bumpers l P2760 Material Urethane bonded to a steel insert. Hardness from durometer (Shore A). Technical Notes Roller only - allows for custom mounting. Tips Durasoft rollers have "teardrop" holes to allow the roller to flex for firm but non-damaging contact. Order No. Durometer l min./max. P A ,50 (2.5") 23,37 28,58/28,65 P A ,50 (2.5") 23,37 28,58/28,65 P A ,50 (2.5") 23,37 28,58/28,65 P A ,50 (2.5") 23,37 28,58/28,68 P B ,50 (2.5") 49,28 31,80/31,90 P B ,50 (2.5") 49,28 31,80/31,90 P B ,50 (2.5") 49,28 31,80/31,90 P B ,50 (2.5") 49,28 31,80/31,90 P A ,6 (4") 23,37 31,80/31,90 P A ,6 (4") 23,37 31,80/31,90 P A ,6 (4") 23,37 31,80/31,90 P A ,6 (4") 23,37 31,80/31,90 P B ,6 (4") 49,28 31,80/31,90 P B ,6 (4") 49,28 31,80/31,90 P B ,6 (4") 49,28 31,80/31,90 P B ,6 (4") 49,28 31,80/31,90 Tel: Fax: web: automotioncomponents.co.uk a website from Automotion Components

7 & Bumpers Durasoft Roller stud mount type B P2764 type C l3 Material Urethane bonded to a steel insert. Hardness from durometer (Shore A). Technical Notes Bearings included (held in place with snap rings), for more details on bearings please see technical pages. Assembled with socket head cap screw, spacer and lock nut. Tips Durasoft rollers have "teardrop" holes to allow the roller to flex for firm but non-damaging contact. Bearing Order No. Durometer type P B ,50 (2.5") 23,37 1/ ,94 3,05 B P B ,50 (2.5") 23,37 1/ ,94 3,05 B P B ,50 (2.5") 23,37 1/ ,94 3,05 B P C ,50 (2.5") 49,28 1/ ,81 6,35 C P C ,50 (2.5") 49,28 1/ ,81 6,35 C P C ,50 (2.5") 49,28 1/ ,81 6,35 C P A ,6 (4") 23,37 1/ ,94 3,05 B P A ,6 (4") 23,37 1/ ,94 3,05 B P A ,6 (4") 23,37 1/ ,94 3,05 B P A ,6 (4") 23,37 1/ ,94 3,05 B P B ,6 (4") 49,28 1/ ,81 6,35 C P B ,6 (4") 49,28 1/ ,81 6,35 C P B ,6 (4") 49,28 1/ ,81 6,35 C P B ,6 (4") 49,28 1/ ,81 6,35 C Tel: Fax: web: automotioncomponents.co.uk a website from Automotion Components

8 Durasoft Roller shaft drive & Bumpers P2766 Material Urethane bonded to a steel insert. Hardness from durometer (Shore A). Technical Notes Designed to be mounted onto a shaft. A hub extends past the roller and is supplied with two set screws at 90. Tips Durasoft rollers have "teardrop" holes to allow the roller to flex for firm but non-damaging contact. Order No. Durometer P A ,50 (2.5") 23,37 12,73/12,83 31,75 12,70 P A ,50 (2.5") 23,37 12,73/12,83 31,75 12,70 P A ,50 (2.5") 23,37 12,73/12,83 31,75 12,70 P A ,50 (2.5") 23,37 12,73/12,83 31,75 12,70 P B ,50 (2.5") 23,37 15,90/16,03 31,75 12,70 P B ,50 (2.5") 23,37 15,90/16,03 31,75 12,70 P B ,50 (2.5") 23,37 15,90/16,03 31,75 12,70 P B ,50 (2.5") 23,37 15,90/16,03 31,75 12,70 P C ,50 (2.5") 23,27 19,08/19,20 31,75 12,70 P C ,50 (2.5") 23,27 19,08/19,20 31,75 12,70 P C ,50 (2.5") 23,27 19,08/19,20 31,75 12,70 P C ,50 (2.5") 23,27 19,08/19,20 31,75 12,70 min./max. l2 Tel: Fax: web: automotioncomponents.co.uk a website from Automotion Components

9 & Bumpers Durasoft Roller clutch bearing type A l 4 l 5 P2768 type B l 4 Material Urethane bonded to a steel insert. Hardness from durometer (Shore A). Technical Notes A clutch bearing allows the roller to turn in only one direction. I you wish to order a right turnign use -R, and -L for the left direction. Tips Durasoft rollers have "teardrop" holes to allow the roller to flex for firm but non-damaging contact. All clutch bearing are type I. Please see technical page... for more information on the bearing. Order No. Durometer max./min. l 4 l 5 Type P A35-R 35 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P A60-R 60 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P A80-R 80 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P A35-L 35 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P A60-L 60 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P A80-L 80 63,50 (2.5") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" A P B35-R 35 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P B60-R 60 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P B80-R 80 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P B35-L 35 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P B60-L 60 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P B80-L 80 63,50 (2.5") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" B P A20-R ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A35-R ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A60-R ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A80-R ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A20-L ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A35-L ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A60-L ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C P A80-L ,60 (4") 23,37 15,77/15,82 45,47 26,42 3,05 10,41 1/2-13" C Tel: Fax: web: automotioncomponents.co.uk a website from Automotion Components

10 Durasoft Roller clutch bearing & Bumpers Order No. Durometer max./min. l 4 l 5 Type P B20-R ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B35-R ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B60-R ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B80-R ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B20-L ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B35-L ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B60-L ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D P B80-L ,60 (4") 49,28 15,77/15,82 31,75 12,70 10,92-1/2-13" D Tel: Fax: web: automotioncomponents.co.uk a website from Automotion Components