PROFESSIONAL DIAMOND BLADE STOCK OFFERING
|
|
|
- Joel Holmes
- 5 years ago
- Views:
Transcription
1 EFFECTIVE 2013 PROFESSIONAL DIAMOND BLADE STOCK OFFERING FAST SERVICE QUALITY PERFORMANCE GREAT VALUE ALL THE MUSCLE YOU NEED
2 Asphalt and Abrasive Materials Asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials. ASPHALT AND ASPHALT OVER CONCRETE DIAMOND BLADES Asphalt cutting is highly damaging to diamond blades, which translates to high costs for contractors. The Norton Charger and Norton Classic professional range of asphalt and asphalt over concrete blades is engineered with blade life in mind; hardness in cores, undercut protection, wide gullet for slurry removal and specifications to meet any aggregate. Choose from our stock program for faster service. Charger Asphalt Diamond Blades RDS 14" x.125" x 1" Medium RDS 18" x.125" x 1" Medium RDS 24" x.175" x 1" Medium RDS 26" x.155" x 1" Medium RDS 30" x.175" x 1" Medium RDS 36" x.187" x 1" Medium Classic Asphalt Diamond Blades INS 14" x.110" x 1" Medium RDS 14" x.125" x 1" Medium RDS 16" x.125" x 1" Medium RDS 18" x.125" x 1" Medium RDS 20" x.125" x 1" Medium RDS 24" x.155" x 1" Medium RDS 26" x.155" x 1" Medium Charger Asphalt Over Concrete Diamond Blades RDS 18" x.125" x 1" Medium RDS 24" x.155" x 1" Medium RDS 30" x.187" x 1" Medium RDS 36" x.187" x 1" Medium RDS = Radius Drop Segments INS = Inserts UNDERCUTTING PROTECTION DROP SEGMENT (RDS) Radius Drop Segment Radius Drop Segments (RDS) protect each blade from damaging effects of undercutting. DIAMOND INSERT Inserts (S) = Inserts on every fourth landing. (H) = Inserts on every other landing.
3 Asphalt and Abrasive Materials Asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials. GREEN/ EARLY ENTRY DIAMOND BLADES Green cutting is harsh on the performance of a diamond blade and warrants the highest of quality. Choose from the popular Norton Paradigm or Charger series with specification grades to meet the demands of any aggregate mixture. Or if a special arbor is needed for your early entry machine then the GMAX series has you covered. All the right sizes along with the specification to get you on and off the concrete. Paradigm Green Concrete Diamond Blades RDS 14" x.145" x 1" Hard RDS 14" x.190" x 1" Medium RDS 14" x.250" x 1" Hard RDS 14" x.250" x 1" Medium RDS 16" x.145" x 1" Hard 35 + Charger Green Concrete Diamond Blades RDS 18" x.125" x 1" Medium GMAX Green Concrete Diamond Blades " x.110" x * Soft " x.110" x * Medium " x.110" x * Hard " x.110" x * Hard " x.110" x * Medium " x.110" x * Hard " x.110" x * Medium " x.110" x * Soft " x.125" x * Hard " x.125" x * Medium " x.125" x * Soft " x.110" x 1" Medium " x.110" x 1" Medium " x.110" x 1" Medium 6 RDS = Radius Drop Segments * special knock-out arbor
4 Reinforced Concrete and Reinforced concrete, hard bricks, limestone, terrazzo and other hard materials. NORTON VMAX WALL SAW DIAMOND BLADES The Norton VMAX wall saw blades offer a unique, multi-sandwich, laserwelded segment technology for maximum performance in both fast cut and life. VMAX Plus Wall Saw Diamond Blades " x.187" x * Multi Purpose All " x.210" x * Multi Purpose All VMAX Wall Saw Diamond Blades " x.235" x * Multi Purpose All " x.187" x * Multi Purpose All " x.210" x * Multi Purpose All " x.235" x * Multi Purpose All " x.235" x * Multi Purpose All " x.187" x * Multi Purpose All " x.210" x * Multi Purpose All " x.235" x * Multi Purpose All " x.187" x * Multi Purpose All " x.20" x * Multi Purpose All " x.235" x * Multi Purpose All " x.187" x * Multi Purpose All " x.210" x * Multi Purpose All * VMAX & VMAX PLUS have A34 Arbor Reinforced Concrete and NORTON CHARGER MASONRY SAW DIAMOND BLADES The Norton Charger and Norton Classic wall saw blades offer exception price performance to ensure a fast clean cut. UPC SIZE MTL/APPLICATION Charger Masonry Diamond Blades " x.095" x 1" Refractory/Hard " x.100" x 1" Masonry/Block " x.100" x 1" Masonry/Combo " x.125" x 1" Masonry/Brick " x.125" x 1" Refractory/Hard " x.125" x 1" Refractory/Hard " x.125" x 1" Masonry/Brick " x.125" x 1" Masonry/GP " x.125" x 1" Masonry Materials Classic Masonry Saw Diamond Blades " x.100" x 1" Masonry/Combo " x.100" x 1" Refractory/GP " x.125" x 1" Refractory/GP " x.125" x 1" Masonry/Combo " x.125" x 1" Refractory/Combo " x.165" x 1" Masonry/Refractory
5 Reinforced Concrete and Reinforced concrete, hard bricks, limestone, terrazzo and other hard materials. NORTON PARADIGM CURED CONCRETE DIAMOND BLADES Professional grade cured concrete blades do not get any better than the Norton Paradigm series. The new segment technology increases life as much as 20% while providing a larger operating window in regards to the aggregate type. That translates into less amount of blade designs needed to do the job. Standard Radius Drop Segments provide additional protection to keep the job moving. A full range of sizes and segment widths covers the saw needs while the Norton Paradigm technology reduces your inventory and helps you complete the job on time with less cost. Paradigm Cured Concrete Diamond Blades RDS 14" x.125" x 1" Soft RDS 16" x.125" x 1" Soft " x.125" x 1" Medium RDS 18" x.125" x 1" Soft " x.155" x 1" Hard " x.155" x 1" Soft " x.155" x 1" Medium RDS 24" x.155" x 1" Medium RDS 26" x.155" x 1" Soft RDS 26" x.155" x 1" Medium RDS 26" x.165" x 1" Soft RDS 26" x.165" x 1" Medium RDS 36" x.187" x 1" Soft " x.125" x 1" Medium " x.125" x 1" Hard " x.125" x 1" Medium " x.155" x 1" Soft " x.155" x 1" Medium " x.155" x 1" Hard RDS 24" x.155" x 1" Soft " x.175" x 1" Medium RDS 26" x.155" x 1" Hard RDS 30" x.165" x 1" Soft RDS 30" x.165" x 1" Medium RDS 30" x.165" x 1" Hard RDS 30" x.175" x 1" Medium RDS 36" x.187" x 1" Medium RDS 36" x.187" x 1" Hard RDS 42" x.190" x 1' Medium RDS 48" x.190" x 1" Medium 48 + RDS = Radius Drop Segments ALL THE MUSCLE YOU NEED
6 Reinforced Concrete and Reinforced concrete, hard bricks, limestone, terrazzo and other hard materials. CURED CONCRETE DIAMOND BLADES Norton Charger and Classic professional grade cured concrete blades are among the finest in the industry. With specifications for material ranging from soft to hard as well as meeting saws of all horsepower ranges. Charger for high performance at a good price and wide range of sizes, or try the Norton Classic where price matters to get the job done. Both quality cured blade series with high performance in reinforced cured concrete. Charger Cured Concrete Diamond Blades " x.110" x 1" Hard " x.125" x 1" Medium " x.125" x 1" Hard " x.125" x 1" Medium " x.125" x 1" Hard " x.125" x 1" Medium " x.125" x 1" Hard " x.155" x 1" Hard " x.175" x 1" Hard " x.155" x 1" Medium " x.155" x 1" Hard " x.175" x 1" Hard " x.187" x 1" Medium " x.187" x 1" Hard Classic Cured Concrete Diamond Blades " x.125" x 1" Medium " x.125" x 1" Medium " x.125" x 1" Medium " x.125" x 1" Medium " x.155" x 1" Medium " x.155" x 1" Medium " x.175" x 1" Medium ALL THE MUSCLE YOU NEED TM USA CUSTOMER SERVICE: Toll Free Phone: 1 (800) Toll Free Fax: 1 (800) CANADA CUSTOMER SERVICE: Toll Free Phone: 1 (800) Toll Free Fax: 1 (800) FORM #8280 REV. 04/14 Saint Gobain April Norton, Clipper, and Paradigm are registered trademarks; Charger, Classic, GMAX, VMAX, and All The Muscle You Need are trademarks of Saint Gobain. PRIMARY SPONSOR
Properties Good general purpose wheel Advantages Suitable for use on all standard construction materials Attractive price-performance ratio
Quality diamond cutting blade DS 60 U Good general purpose wheel Suitable for use on all standard construction materials Attractive price-performance ratio Pavement slabs operating 115 x 22,23 80 m/s 13,300
Diamond cutting tools Applications guide
Applications guide KLINGSPOR Diamond Cutting Blades are the logical supplement to the Kronenflex Cutting-Off Wheels programme. These wheels provide economical cutting of mineral materials because of their
Available wheel size & Standard Packing Quantity. Wheel size (DxTxH) Please specify wheel thickness (T) and hole (H) when order.
Mini Cut-off wheels For use on small wheel grinders, die grinders with straight or flexible shafts, K-PRIX external reinforced Mini cut-off wheels are used in various metal cutting, grooving, grinding
Extended Family. Titleist Forged Irons. Forged for Feel and Precision. Forged 1025 Mild Carbon Steel. Forged 410 Stainless Steel
F O R G I N G E X C E L L E N C E T I T L E I S T F O R G E D I R O N S Titleist Forged Irons Titleist has a rich forged iron history. That s because Titleist irons have been trusted by many of the world
!!!!!!! GENERAL!INFORMATION!INSTRUCTION! FOR! PEBBLECRETE!
GENERALINFORMATIONINSTRUCTION FOR PEBBLECRETE I. GENERAL INFORMATION FOR PEBBLECRETE INTRODUCTION PebbleCrete is a quartz-based aggregate designed especially for swimming pools that is imported from overseas
Palm Beach State College. Florida s First Public Community College SILICA EXPOSURE CONTROL PLAN
Palm Beach State College Florida s First Public Community College SILICA EXPOSURE CONTROL PLAN 2018 Purpose The purpose of this document is to establish and implement a written exposure control plan that
Specifically. Construction
Specifically Construction Goals for this presentation What is Silica? Where is Silica on our jobsites? How is Silica a hazard? What does OSHA require from Contractors? What is Table 1? Alternate Methods
Member Resource. Specification No.:CSDA-SA-117. Aptitude Test Member Resource No.: CSDA-MR-001 Effective Date: April 20, 2015 Revised: Title:
Specification No.:CSDA-SA-117 Member Resource : Aptitude Test Member Resource No.: CSDA-MR-001 : April 20, 2015 : Introduction This document provides concrete cutting, polishing and imaging companies with
OSHA Silica Regulations: Impact & Best Practices
OSHA Silica Regulations: Impact & Best Practices OSHA Silica Regulations: Impact & Best Practices Khadija Talley Hilti This session is eligible for 1 Contact Hour. For these hours to appear on your certificate,
In Place Density Determination of Asphalt Concrete by the Coring Method
In Place Density Determination of Asphalt Concrete by the Coring Method 1. Scope: This procedure is for determining the density of in place asphalt concrete pavement. 2. Apparatus: 2.1 Scale or balance
Presented by: Laura Cullom Phillips 66 Rodeo Jay Prescott Shell Martinez Refinery
Presented by: Laura Cullom Phillips 66 Rodeo Jay Prescott Shell Martinez Refinery WHAT IS CRYSTALLINE SILICA? Silica is a naturally occurring mineral found in rock, sand, stone, concrete, brick, mortar,
OSHA s Respirable Crystalline Silica Standard for Construction. OSHA Cranes & Derricks Subpart CC
OSHA Silica Rule OSHA s Respirable Crystalline Silica Standard for Construction OSHA Cranes & Derricks Subpart CC Workers who are exposed to respirable crystalline silica dust are at increased risk of
Kronenflex cutting-off wheels 2,0 3,2 mm for hand held machines. A 24 Extra. A 24 R Supra
Kronenflex cutting-off wheels 2,0 3,2 mm A 24 Extra Proven a million times over Standard wheel with outstanding price-performance ratio For universal use in metalworking Fast cutting off of solid material
Parking. Parking 11/27/2012. On street parking. Off-street parking is space provided for vehicular parking outside the dedicated street right-of-way.
Parking On street parking Off-street parking is space provided for vehicular parking outside the dedicated street right-of-way. At-grade parking lot Parking garages SITE Parking 90 degree (20 x 9 stalls)
Including the new. series. HTC Pocket Grinding Guide.
Including the new series HTC Pocket Grinding Guide HTC Superfloor Platinum The intention of the first grinding step is to create a good end result. All subsequent grinding steps - mu Resin/plastic bonded
E Light Electric Services, Inc. Workplace Crystalline Silica Exposure Control Policy
E Light Electric Services, Inc. Workplace Crystalline Silica Exposure Control Policy Approval: Approved. Ted Smith 10/9/17 Rev: 0 10/03/17 1. Purpose To reduce employee exposure of airborne crystalline
ONSTRUCTION. RockRazor Foundation Drilling & Trenching Platform
ONSTRUCTION RockRazor Foundation Drilling & Trenching Platform TM Introducing The new quick-change indexable cutting system for earthworks. The RockRazor TM system s quick change ability reduces machine
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica David O Connor OSHA Directorate of Standards and Guidance March 8, 2017 Final Rule Published on March 25, 2016 Reasons for the
Item 585 Ride Quality for Pavement Surfaces
Item 585 Ride Quality for Pavement Surfaces 1. DESCRIPTION 2. EQUIPMENT Measure and evaluate the ride quality of pavement surfaces. 2.1. Surface Test Type A. Provide a 10-ft. straightedge or where allowed,
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica: The Construction Standard
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica: The Construction Standard David O Connor oconnor.david@dol.gov 202-693-2269 OSHA Directorate of Standards and Guidance December
Hoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
SILICA EXPOSURE CONTROL PLAN
SILICA EXPOSURE CONTROL PLAN June 2017 Contents Purpose... 3 Scope... 3 Responsibilities... 3 Program Requirements... 4 Initial Exposure Assessment... 4 Periodic Exposure Assessment... 5 Employee Notification...
T17 Scrubber PARTS & CONSUMABLES
T7 Scrubber PARTS & CONSUMABLES SERIAL # Only genuine Tennant parts can ensure peak performance for the life of your equipment. BRUSHES Excellent cleaning performance, designed and engineered specifically
DETERMINING OPTIMUM RESIDUAL ASPHALT CONTENT (RAC) FOR POLYMER-MODIFIED SLURRY SEAL (MICROSURFACING) MIXTURES
Test Procedure for DETERMINING OPTIMUM RESIDUAL ASPHALT CONTENT (RAC) FOR POLYMER-MODIFIED SLURRY SEAL (MICROSURFACING) MIXTURES TxDOT Designation: Tex-240-F Effective Date: December 2004 1. SCOPE 1.1
ASPHALT PLANT LEVEL 1
ASPHALT PLANT LEVEL 1 Module 5: Bulk Specific Gravity FM 1 T 166 FDOT Course Release: 10, Module 5 1 Specification Year: January 2015 Release 10 5-1 FM 1 T 166 Bulk specific gravity of compacted mixtures.
Arbor Terminator Press Operation Manual For IDT Connectors Order No Engineering No: AM
Arbor Terminator Press Operation Manual For IDT Connectors Order No. 11-20-0815 Engineering No: AM7223-140 Description Operation Maintenance Order No: TM-011200815 Release Date: 03-08-12 UNCONTROLLED COPY
OSHA's New Silica Rule Everything You Need to Know. Defined. Respirable Crystalline Silica Dust
OSHA's New Silica Rule Everything You Need to Know Chris Hall, CHST 12 West Vermont Street Indianapolis, IN 46204 800.641.5990 www.safetyresources.com Defined Respirable Crystalline Silica Dust Common
OSHA SILICA REGULATION GUIDE
OSHA SILICA REGULATION GUIDE Masonry Saws What is silica dust? Silica dust is what is produced when concrete, bricks, blocks, etc are cut, and while it might seem harmless, it contains crystalline silica.
Minimum Standards for Driveway Construction Village of Bear Creek
Minimum Standards for Driveway Construction Village of Bear Creek An exception to the following requirements may only be granted by city council. The needs of each drainage system are considered independently,
Sept 23, 2014 LAB MANUAL
Sept 23, 2014 LAB MANUAL 1000.0 1000 STANDARD PRACTICES 1000.1 CALCULATIONS and FORMS Throughout this manual there are test calculation procedures. These calculations are provided so that a technician
TOP SELLERS B SWEETHANDS STICKHANDLING TRAINER PAGE 8 A SNIPERS EDGE SHOOTING TARP PAGE 6 C SHOOTING PADS ICE SKILL MAT PAGE 10
2 WE LOVE THE GAME Welcome to Sniper s Edge Hockey, the world s largest and premier supplier of hockey training aids and accessories. When you need a trusted, reliable source that will work hard to partner
Silica Exposure Control Plan. University of Maryland, Baltimore
Silica Exposure Control Plan University of Maryland, Baltimore Table of Contents Purpose Section 1 Scope.Section 2 Responsibilities..Section 3 Specified Exposure Control Methods..Section 4 Non-Specified
NO FAULT SAFETY SURFACE DETAIL SHEET "A" CONCRETE BASE ADJACENT TO SOIL
NO FAULT SAFETY SURFACE DETAIL SHEET "A" CONCRETE BASE ADJACENT TO SOIL TOTAL DEPTH VARIES W/FALL HEIGHT REQUIREMENTS POSITIVE DRAINAGE 3/8" NOMINAL DEPTH FOR WEAR LAYER IMPACT LAYER - DEPTH VARIES 0"-3"
Compliance with OSHA s Silica Rule
Compliance with OSHA s Silica Rule Rule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment Overview Known health hazard and top priority
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
Vee-Rib V-Belt. Vibration-free. Heat resistant. Maximum flexibility. High horsepower. Abrasion resistant
Vibration-free Heat resistant 1 Maximum flexibility 2 3 High horsepower Abrasion resistant Applications: Industrial dryers Fitness equipment Machine tools High speed blowers & More Heavy Duty s 1 Special,
Tex-206-F, Compacting Specimens Using the Texas Gyratory Compactor (TGC)
Contents: Section 1 Overview...2 Section 2 Part I, Compacting Specimens Using the TGC...3 Section 3 Part II, Correlating the Texas...9 Section 4 Notes...12 Section 5 Archived Versions...13 Texas Department
Presented to: Louisiana Transportation Conference February 26, Presenter: Corey Zollinger, P.E
Presented to: Louisiana Transportation Conference February 26, 2018 Presenter: Corey Zollinger, P.E. - 1 - AGENDA What is Roller Compacted Concrete, Where has it Been Used, and Why? RCC Construction Process
Rule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment
Compliance with OSHA s Silica Rule Rule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment Overview Known health hazard and top priority
Tied Foam Core Technology and the achieved impact performance of sandwich constructions based on reinforced foam materials
Tied Foam Core Technology and the achieved impact performance of sandwich constructions based on reinforced foam materials Department TX1 Stade Dr. Gregor Endres CFK-Valley Stade Convention 2014 Tied Foam
4/18/2018. What is silica? Respirable Crystalline Silica. Concern: 3 forms of crystalline silica. Silica is found in rock, soil, and sand
What is silica? Respirable Crystalline Silica Its Not Just Dust! One of the most common minerals on Earth Photos courtesy PDPhoto.org Silica is found in rock, soil, and sand Concern: 3 forms of crystalline
HUSQVARNA & OSHA SILICA REGULATION GUIDE. Power Cutters
HUSQVARNA & OSHA SILICA REGULATION GUIDE Power Cutters What is silica dust? Silica dust is what is produced when concrete, bricks, blocks, etc are cut, and while it might seem harmless, it contains crystalline
CUSTOMS TARIFF - SCHEDULE XIII - 1
XIII - 1 Section XIII ARTICLES OF STONE, PLASTER, CEMENT, ASBESTOS, MICA OR SIMILAR MATERIALS; CERAMIC PRODUCTS; GLASS AND GLASSWARE Issued January 1, 2014 68 - i Chapter 68 ARTICLES OF STONE, PLASTER,
COMPACTING SPECIMENS USING THE TEXAS GYRATORY COMPACTOR (TGC) PART I COMPACTING SPECIMENS USING THE TGC. Test Procedure for
Test Procedure for COMPACTING SPECIMENS USING THE TEXAS GYRATORY COMPACTOR Texas Department of Transportation TxDOT Designation: Tex-206-F Effective Dates: May 2008 May 2009. 1. SCOPE 1.1 Use Part I of
VEHICLE CROSSING AND PEDESTRIAN CUTDOWN SET OUT
Crossing Width 0 min./5 max. - Residential Vehicle Crossing 0 min./7 max. - Commercial/Industrial Vehicle Crossing 1800 min./2400 Des. - Pedestrian Cut Down Crossing Width 0 min./5 max. - Residential 0
Special Instructions KNIT IN LOGO, ARCH SUPPORT, MESH TOP, SUPER STRETCH MICROFIBER PKG# B02063N3NS-M10A PLEASE USE SPEC ON THE LAST ARTWORK PAGE
S101715 Season: NA Description: MENS 3PP SUPER STRETCH Skechers Division: Mens Created By: KJ Created Date: 10/09/2013 Yarn Count/Ply Size Range (U31) 10-13 Cuff 1X1 RIB.75 CM Content Machine Type 144N
LEGACY II TM STARTING PLATFORMS
LEGACY II TM STARTING PLATFORMS INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334
Hot and Cold Plunge Pools. Rehabilitate. Recover. Relax. Hydrotherapy Pools Plunge Pools
Hot and Cold Plunge Pools. Rehabilitate. Recover. Relax. Hydrotherapy Pools Plunge Pools built to last...easy to maintain A Proud Heritage With over half a century of experience bringing state-of-the-art
Fly Ash Utilisation in Odisha
Fly Ash Utilisation in Odisha Fly Ash Utilisation Conference, Delhi 15 th, March, 2018 Dr. D.K. Behera Sr. Env. Scientist State Pollution Control Board, Odisha Bhubaneswar Setting up of Fly Ash Resource
INTERNATIONAL SLURRY SURFACING ASSOCIATION TECHNICAL BULLETIN. 800 Roosevelt Road, Building C-312, Glen Ellyn, IL 60137
INTERNATIONAL SLURRY SURFACING ASSOCIATION TECHNICAL BULLETIN 800 Roosevelt Road, Building C-312, Glen Ellyn, IL 60137 No. 144 Revised 2013 Test Method for Classification of Slurry Surfacing Materials
Brick & Concrete. Expandet ESI Xtreme Pro Injection Mortar ADVANTAGES. ACCESSORIES Wide range of accessories. INSTALLATION:
Expandet ESI Xtreme Pro Injection Mortar Expandet ESI Xtreme Pro is the professional all round bonded anchor solution that provides expansion free, safe and fast anchorage of threaded rod, socket anchors
Replace sanitary manhole casting (CITY to furnish casting); complete as specified Each $ $23,600.00
30) Wood Sewer & Excavating, Inc. E9238 County Road X New London, WI 54961 Quantity Unit Price Extension Section 1: Sanitary Manhole Rebilitation $581,301.80 100 Replace sanitary manhole casting (CITY
1. BLADE STAND-OUT 3m (10ft): 1,4m (4-2/3ft) / 5m (16ft): 1,8m (6ft) / 8m (26ft): 2,0m (6-1/2ft)
86 LAYOUT TOOLS IRWIN TAPE MEASURES IRWIN Tools offers a new full range of measuring tapes designed for tradesmen looking for accuracy, comfort and durability. The range features a brand new ergonomically
FABRICATED PARTS. Wire Cloth. Expanded Metal. Perforated Metal. Sheet Metal. Sintered Wire Cloth. 160 Forenlius Avenue, Clifton, New Jersey
FABRICATED PARTS Expanded Metal Perforated Metal Sheet Metal 160 Forenlius Avenue, Clifton, New Jersey 07104-1844 Sintered Fabricated Parts A Key Player! The Newark Company has been supplying wire cloth
Treated w/ mildew and UV inhibitors to keep its beauty through all seasons
Cover Features Ideal Spa Covers Have Over 20 Points Of Reinforcement Ideal Spa Cover Features Marine Grade Vinyl Treated w/ mildew and UV inhibitors to keep its beauty through all seasons Double Reinforced
About ProEdge Bowling Celebrating Over 30 Years in the Bowling Industry
www.proedgebowling.com About ProEdge Bowling ProEdge Bowling has been providing advanced pro shop tools and accessories to the domestic and international bowling community for over 30 years. Our unique
Two Rivers Activity Center (TRAC) McGough Construction 2737 Fairview Avenue North St. Paul, MN Phone: (651)
Project Two Rivers Activity Center () McGough Construction 2737 Fairview Avenue North St. Paul, MN 55113-1372 Phone: (651) 633-5050 Meeting No. 12 Date: 09/14/16 Time: 1:00 PM Meeting Attendance Company
INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT)
![INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT)](/thumbs/90/102183460.jpg "INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT)")
INSTALLATION INSTRUCTIONS AT-SERIES ANCHOR ASSEMBLY PART NUMBER: F-04CAJP 450 LB. [204kg] MAXIMUM CAPACITY (PRO POOL LIFT) - WARNING- IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS.
l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
New Product. featuring an exclusive dual directional head* Innovative Fastening Technologies. From the makers of. * Patent-pending design.
Innovative Fastening Technologies New Product featuring an exclusive dual directional head* Light-Gauge * Patent-pending design Wood From the makers of Concrete High Performance in Threaded Anchoring The
coolaroo.com Protection all year round Installing your new Coolaroo all weather sail is simple, following our step-by-step instructions.
Protection all year round Installing your new Coolaroo all weather sail is simple, following our step-by-step instructions. Features Provides 100% UV block Water resistant M ade with UV stabilised knitted
1.3 LIMITATIONS: The following application limitations must be recognized and considered before using this product:
3965 Pepin Avenue Red Wing, MN 55066-1837 Toll Free: (800) 328-6146 Phone: (651) 388-8282 Fax: (651) 388-5065 www.protecta.com User Instruction Manual AJ720A Concrete Anchor This manual is intended to
Instructions for use Installation recommendations
G A L A X Y P O O L O V A L S H A P E I n s t a l l a t i o n r e c o m m e n d a t i o n s a n d i n s t r u c t i o n s f o r u s e Instructions for use Installation recommendations 2 Installation recommendations
CUTTING, GRINDING & COMBINATION WHEELS Get the most demanding jobs done right and done fast.
BONDED CUTTING, GRINDING & COMBINATION S Get the most demanding jobs done right and done fast. 800.835.9999 / weilercorp.com UNCAGED AND READY TO ATTACK Weiler s cutting, grinding and combination wheels
853PRO Hydraulic Saw OPERATOR S MANUAL ICS, Blount International Inc. Specifications are subject to change without notice.
853PRO Hydraulic Saw OPERATOR S MANUAL 853PRO OPERATOR S MANUAL TABLE OF CONTENTS INTRODUCTION This manual outlines the maintenance and operation of ICS manufactured products. This is a professional tool
Model OP-1 Hydrophone with -BT Option With Bluetooth Transmitter. doc rev
Model OP-1 Hydrophone with -BT Option With Bluetooth Transmitter doc rev 20190228 Introduction Oceanphonics is a word we have created that describes the art of listening and even comprehending sounds underwater
Mid Rivers Mall Drive Multi-Use Path (Rte. N to MO 364)
Mid Rivers Mall Drive Multi-Use Path (Rte. N to MO 364) Sponsor St Peters Project No. RB19-000022 Project Type Other TOTAL FUNDING Total County Sponsor Federal $1,177,251.00 $238,179.00 $59,546.00 $879,526.00
Special Instructions KNIT IN LOGO, ROSSO TOE, MESH UPPER. Select Toe and Heel Cushioning. PKG# B02067S3RS-M10 Spec on last artwork page
S101590 Season: NA Description: MENS NO SHOW Skechers Division: Mens Created By: KJ Created Date: 10/08/2013 Yarn Count/Ply -32S/2PLY Size Range Cuff Binding Content 65% poly, 30% cotton, 5% spandex (1)
OSHA Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for Construction
OSHA 3902-11 2016 Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for Construction Occupational Safety and Health Act of 1970 To assure safe and healthful working conditions
Federal Railroad Administration. HUDSON TUNNEL PROJECT: WEEHAWKEN COMMUNITY MEETING January 18, 2018
HUDSON TUNNEL PROJECT: WEEHAWKEN COMMUNITY MEETING January 18, 2018 Agenda Near Term Activity Hudson Tunnel Project Revisions to the Project to Address Community Concerns Description of Construction Activities
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Alignment
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Program: Construction Technology Number of Courses: 22 Date Updated: 09.18.2014 Submitted by: SueEllen Warren, ext. 4519 Renee
SILICA EXPOSURE PREVENTION PROGRAM
SILICA EXPOSURE PREVENTION PROGRAM A. BEFORE ANY EMPLOYEE GRINDS OR SAW CUTS CONCRETE AND WEARS A RESPIRATOR HE OR SHE MUST HAVE: 1. A medical examination, medical and occupational history to collect data
No November 28, 2016 OSHA ISSUES SMALL ENTITY COMPLIANCE GUIDE FOR SILICA IN CONSTRUCTION
No. 1606 November 28, 2016 OSHA ISSUES SMALL ENTITY COMPLIANCE GUIDE FOR SILICA IN CONSTRUCTION The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis,
Tsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
How to use the DuPageMaps Interactive Web Mapping Application to locate a DuPage County Bikeway
How to use the DuPageMaps Interactive Web Mapping Application to locate a DuPage County Bikeway Interactive Map Link: http://gis.dupageco.org/dupagemaps Helpful Information: Bikeways Changes in Maps Scale:
dumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
OSHA s Construction Standard for Occupational Exposure to Respirable Crystalline Silica 29 CFR
OSHA s Construction Standard for Occupational Exposure to Respirable Crystalline Silica 29 CFR 1926.1053 Joseph Coble ScD, CIH Director, Office of Technological Feasibility Directorate of Standards and
A D V A N T A G E, HAR-TRU.
ADVANTAGE, UPDATING A CLASSIC. Unique subsurface irrigation systems are another technological innovation that makes a classic HAR-TRU surface even more popular. Built with a controlled water reservoir
Hand Arm Vibration Pocket guide. speedyservices.com/intelligentsafety
Hand Arm Vibration Pocket guide speedyservices.com/intelligentsafety A journey to competence Industry Perspective Construction accounts for 5% of employees in the UK but also 31% of fatal accidents 5 million
THE LEADER IN INNOVATIVE TECHNOLOGY AND PRODUCT DESIGN
CONTENTS PEAKSPEED... 4 CLASSIC... 8 THE LEADER IN INNOVATIVE TECHNOLOGY AND PRODUCT DESIGN GOALIE DM GOALIE... 12 BAGS PRO LOCKER... 16 PRO COACH... 16 PRO TEAM... 17 ACCESSORIES... 17 2 2017 2017 3 PEEKSPEED
THE MOST ADVANCED NAME IN WATER MANAGEMENT SOLUTIONS THE LATERAL CONNECTION SOLUTION
THE MOST ADVANCED NAME IN WATER MANAGEMENT SOLUTIONS THE LATERAL CONNECTION SOLUTION FITS ANY MAINLINE OR STRUCTURE Stainless Steel Band SPECIFICATIONS Rubber Sleeve Band Screw Housing Gasket ASTM F477
Injection mortar FIS VL
Injection mortar FIS VL The solid injection mortar for standard applications in cracked concrete and masonry High-bay warehouses BUILDING MATERIALS Approved for anchorings in: Concrete C20/25 to C50/60,
UNLEASH THE PASSION 2017 SELECT SPORT AMERICA FALL 2017
UNLEASH THE PASSION SELECT SPORT AMERICA FALL 2017 2017 FALL 2017 PRODUCT NEWS Another exciting season is underway! We are pleased to present our newest products coming to market for Fall 2017. Along with
Simply the finest trail groomer you can buy
Simply the finest trail groomer you can buy www.theshopindustrial.com A snowmobile trail groomer must do three things to effectively groom a snowmobile trail: cut the moguls; process the snow; and finally,
2012 CATALOG. printed on New Page Paper: Anthem Sustainable Forest Initiative Participant
2012 CATALOG printed on New Page Paper: Anthem Sustainable Forest Initiative Participant LOW ANGLE TOURING Low AnGle: The most common paddling style, RelaxeD cadence and Less FatiGuing on LonGer trips.
Breathe Safer. REFERENCE GUIDE This reference guide deals only with the standards for respirable silica for the construction industry.
Breathe Safer REFERENCE GUIDE This reference guide deals only with the standards for respirable silica for the construction industry. Filter What is Respirable Crystalline Silica? Crystalline silica, is
John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO
OSHA s Respirable Crystalline Silica Rule May 2016 John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov Denver AO
Use of Roller Compacted Concrete By GDOT. Presented By: Joe W. Sheffield, PE Georgia Department of Transportation District Engineer, Tifton, GA
Use of Roller Compacted Concrete By GDOT Presented By: Joe W. Sheffield, PE Georgia Department of Transportation District Engineer, Tifton, GA First Use of RCC By Georgia DOT I-285 Atlanta, GA 2005 Traffic:
Three Springs Design Guidelines Fencing and Wall Standards
Three Springs Design Guidelines Fencing and Wall Standards Original Adopted: June 12, 2006 Minor Amendment: December 2012 Minor Amendment: March 23, 2017 TABLE OF CONTENTS: FENCING AND WALLS 1.0 INTRODUCTION
Milling Cutters & Saws
Milling s & Saws Side Milling s High Speed Steel Plain & Tooth Plain 2 1/2 3/16 14 603220 2 1/2 1/4 14 603221 2 1/2 5/16 14 603222 2 1/2 3/8 14 603223 2 5/8 3/16 14 603224 2 5/8 1/4 14 603225 2 5/8 5/16
Challenges of Tack Coat
Challenges of Tack Coat Jim Weston Pavement Implementation Engineer Lynn Peterson Secretary of Transportation The 53 rd Idaho Asphalt Conference Moscow, ID October 24, 2013 What is tack coat and why use
GREEK TRIREME, 480 B.C. Scale: 1/72 Length: 515mm Width: 180mm Height: 220mm
GREEK TRIREME, 480 B.C. Scale: 1/72 Length: 515mm Width: 180mm Height: 220mm HISTORY: The model represents a Greek Trireme from the age of battle of Salamis (480 B.C.). The crew were 170 oarsmen and about
SILICA EXPOSURE MEASUREMENT IN REAL-TIME FOR CONSTRUCTION
SILICA EXPOSURE MEASUREMENT IN REAL-TIME FOR CONSTRUCTION APPLICATION NOTE EXPMN-023(A4) Frequently Asked Questions What is crystalline silica and why is it important to measure exposure? Silica is found
Summary of Findings Concerning Longitudinal Cracking on 16' Wide Ramps
Summary of Findings Concerning Longitudinal Cracking on 16' Wide Ramps Office of Pavement Engineering October 14, 2003 Abstract: This paper summarizes the current practice in ODOT regarding the construction
INSTALLATION, OPERATION &MAINTENANCE MANUAL
INSTALLATION, OPERATION &MAINTENANCE MANUAL HOME PLATE w/ ANCHOR & PLUG No. 33200 HOME PLATE w/ SPIKES No. 33201 BASEBALL BASE w/ ANCHOR & PLUG (SET OF 3) No. 33210 BASEBALL BASE w/ ANCHOR & PLUG (SET
Method of Test for Determining the Cutout Correction and In Place Density of Asphalt Concrete by the Nuclear Gauge Method
Method of Test for Determining the Cutout Correction and In Place Density of Asphalt Concrete by the Nuclear Gauge Method 1. Scope: This test is for determining the in place density of asphalt concrete
SECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
SCI/IAT/IHT Seminar Cases for and against hot mix road surfacings
SCI/IAT/IHT Seminar Cases for and against hot mix road surfacings Overview, Insert the including title of your less common presentation options here Presented Presented by by Dr Name Cliff Here Nicholls
COMPACTING SPECIMENS USING THE TEXAS GYRATORY COMPACTOR (TGC) PART I COMPACTING SPECIMENS USING THE TGC. Test Procedure for
Test Procedure for COMPACTING SPECIMENS USING THE TEXAS GYRATORY COMPACTOR Texas Department of Transportation TxDOT Designation: Tex-206-F Effective Dates: June 2009 July 2009. 1. SCOPE 1.1 Use Part I
Two Rivers Activity Center (TRAC) McGough Construction 2737 Fairview Avenue North St. Paul, MN Phone: (651)
Project Two Rivers Activity Center () McGough Construction 2737 Fairview Avenue North St. Paul, MN 55113-1372 Phone: (651) 633-5050 Meeting No. 10 Date: 08/31/16 Time: 1:00 PM Meeting Attendance Company