Global Gases Newsletter
|
|
- Lionel Golden
- 5 years ago
- Views:
Transcription
1 VOLUME 1 ISSUE JAN 2012 Global Gases Newsletter Inside This Issue 1 Message from the MD & CEO 2 Safety Matters Safety is your responsibility 3 GGA Employees Profile 4 GGM Employees Profile 5 Global Gases Group open first helium facility in China 6 News from HR- Birthdays, Celebrations and Anniversaries Message from the MD & CEO I am pleased to welcome you to the Global Gases Newsletter and I hope you find all the information you need on our people, our products and our services. Since founding the Company, I have focused our business development strategy on delivering the very high levels of Customer Service expected in the markets we serve. Our rate of growth is testament to our success in meeting this goal and our excellent team strives always to deliver continuous improvement for ALL our customers. Whether you are a new or returning customer we are keen to demonstrate to you our unique Global Gases Service ethos and welcome you to our business family. We look forward to serving your business needs! Celebrate the season, but don t forget about safety and health at work Amidst the year-end celebrations, as more employees are on leave, those who are at work must take extra care and never compromise on safety and health measures while trying to get the job done. Stay alert always and do not take on excessive overtime. Supervisors and managers must also be mindful of worker fatigue and manage work schedules properly. Even when celebrating outside working hours, please do not take short cuts and never take safety and health for granted. Say no to risks and enjoy a safe, healthy and fantastic holiday season.
2 PAGE 2 GLOBAL GASES NEWSLETTER Safety is your responsibility Every employee in the organisation must make sure that Safety is his or her responsibility. As an employee, you should: a) Learn to work safely and take all rules seriously and recognize hazards and avoid them. b) Report all accidents, injuries and illness to your supervisor immediate c) Inspect tools before use to avoid injury. d) Wear all assigned personal protective equipment. e) On the other hand, it is management's responsibility to: a. Provide a safe and healthy workplace. b. b. Provide personal protective equipment. c. Train employees in safe procedures and in how to identify hazards. Everyone must be aware of potential hazards on the job: f) Poor housekeeping results in slips, trips and falls. g) Electricity can cause shocks, burns or fire if not handled properly. h) Poor material handling may cause back problems or other injuries. i) Tools and equipment can cause injuries if guards or protective devices are disengaged. j) Always use the protections that are provided on the job: a. Guards on machines and tools keep body parts from contacting moving equipment. b. Insulation on electrical equipment prevents burns, shock and fire. c. Lockout/tagout assures equipment is de-energized before it is repaired. d. Personal protective equipment shields your body from hazards you may face on the job. k) In case of emergency: a. Understand alarms and evacuation routes. b. Know how to notify emergency response personnel. c. Implement a procedure for leaving the scene safely so emergency personnel can do their job. d. Wipe up spills promptly and correctly. Safety benefits everyone! By incorporating safety rules, employees avoid injury as well as illness from exposure to hazardous substances. With fewer injuries, a business can be more productive and profitable.
3 GLOBAL GASES NEWSLETTER PAGE 3 Our People Down Under Global Gases Australia Profile: GGA Peter Hay: Director Business Development Photo- 3 Peter Hay (LS); Tami (RS) Peter Hay is the Director of Business Development in Global Gases Australia. He has over 35 years of experience in the Gases industry and has held senior management roles with BOC and BJ Service Co. During his long career, Peter has been involved with the development of offshore container and cylinder specifications required to meet the market and technical demands in Australia. He brings a wealth of knowledge to Global Gases on the various engineering standards required to maintain the most stringent safety standards. Peter is a life member and a past president of the Petroleum Club of Western Australia. Photo 1 - Tami Tami Pachadzhanova, Business Administrator, Tami is the Business Administrator in Global Gases Australia with over 10 years of working experience in the IT and Banking industry. Tami is a one of key member in Global Gases Australia. She manages the operations from answering the call to receiving the guests and preparing the business meeting at Global Gases Australia. She is involved in managing purchasing, logistic, operations, accounting and finally HSEQ. She is one dynamic lady who manages the Asset register. She was responsible for the innovation of the recent changes to Global Gases Asset Register design for Global Gases Group. Gordon McClean, Regional Manager Photo 4 Gordon McClean Gordon McClean is the Regional Manager managing the operations in Global Gases Australia. He has 20 years of experience in Oil & Gases - Offshore Industry. Gordon worked in the areas of Welding Supervision, Quality Control and QA Management with one of Australia s largest steel fabricators. Photo 2 - Ron Oates Ron Oates, Production Manager Ron is the production manager with over 15 years of experience in the Gases industry. Ron is a one of key team operations member in Global Gases Australia. He manages the production and operations in Global Gases Australia. He manages effective and safe production of gases and gases mixtures and ensures production is carried out to meet customer order..
4 PAGE 4 GLOBAL GASES NEWSLETTER Our People in Malaysia Global Gases Malaysia Profile: GGM Nanda Kumar, Production Manager, Nanda is the Production Manager in Global Gases Malaysia. He is responsible for the Global Gases Malaysia Shah Alam facility in the manufacturing of the Quads for welding gases, diving gases, provision of gas cylinder testing service, supply and distribution of specialist gases for diving, industrial, hospital and military uses. Preema, HR & Admin Executive, GGM Preema is the HR & Admin Executive in Global Gases Malaysia. She is responsible for Human Resource, training and administration functions. Leena, Accounts Executive Leena is the Accounts Executive in Global Gases Malaysia. She manages the accounts department. Swapnil S. Vichare, Operations Manager, Asia Pacific Swapnil is the Group Operation Manager in Global Gases Malaysia. He is responsible for the Group Operations Management in Asia Pacific. He is involved in the settling up, implementing and managing the Global Gases Facilities and ensuring the operations are running smoothly without any glitches in Global Gases Group. Vinodhini, Purchase Executive Vinodhini is the Purchasing Executive in Global Gases Malaysia. She manages the purchasing department. She is responsible for the supplier / vendor management system in Global Gases Malaysia. Shahrul, HSE Officer Shahrul is the Safety Officer in Global Gases Malaysia. He is responsible for the Quality, Health and Safety management systems in Global Gases Malaysia Facility. He is responsible for the Global Gases Integrated Management System implementation and one of the key player who manage the internal and external ISO audit in Malaysia. Kamarul, Logistics Officer Kamarul is the Logistics officer in Global Gases Malaysia. He manages the logistics department. She is responsible for the logistics management system in Global Gases Malaysia.
5 GLOBAL GASES NEWSLETTER PAGE 5 Global Gases Group opens first helium facility in China By 29 Nov 2011 By Rob Cockerill Dubai-based multinational industrial gases company Global Gases Group (Global) has announced a further major investment in its helium supply operations. Global is already a major and expanding supplier of helium products in the Middle East, Africa, Asia and Australia and its new Nanjing facility has now opened to supply the rapidly expanding Chinese market. The company has installed a plant to fill liquid helium dewars to supply magnet production, as well as supporting local customer demands for liquid and gaseous helium products. Global Gases Group MD and CEO, Deepak Mehta, told gasworld magazine, We are very excited about the opportunities our new Chinese operations will give us and we are already planning how we can expand further, to offer customers a wider range of products based on our commitment to delivering the highest levels of service. Ronghua Lin, Global Gases General Manager, China, added, The opening of our new facility is a great day for the company. We have focused on China as having major growth potential for Global Gases and we expect this new plant to be the first of several in the next 2-3 years. Expanding portfolio Global presently has helium filling plants in Cape Town, Singapore, Kuala Lumpur, Perth, and Dubai and has been supplied with bulk liquid helium by Matheson since Since 2010, the company has installed two of its own helium transfill facilities to supply US Government demands in Afghanistan. Mehta concludes, In addition to our current operations, we are actively planning to expand our product supply portfolio to support our customers in Asia, Africa, Europe, and the Americas. I expect to make further announcements on new production facilities in the next few months. As with our previous developments, our organisation is committed to implementing and operating sustainable business practices. The company s Health, Safety, and Environment management system is on a par with global standards.
6 PAGE 6 GLOBAL GASES NEWSLETTER Latest News from Human Resources Birthdays and Anniversaries Congratulations Photo 5 Kim Garcesto & wife Our Workshop Technician at Global Gases Singapore, Kim Garcesto s wife has given birth to a healthy Baby Boy on 23 rd of November 2011 at 6.59 am. Congratulation Kim, baby was named as Boy Garcesto Wedding Announcement Photo 6 - Preema Congratulation to Preema, from Global Gases Malaysia who just got married on the 28 th of November Global Gases wishes her and her husband fruitful and copious matrimonial life.
1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
More informationFocused on improving metal fabrication. tell me more
Focused on improving metal fabrication tell me more Air Products brings you a safe and healthy work environment Innovative gases and gas supply solutions = optimum weld and cut quality, productivity and
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationReducing Exposures From Confined Space Entry
Reducing Exposures From Confined Space Entry Over 1.6 million Americans work in Confined Spaces each year, and each year many accidents occur. Many of these accidents lead to serious injury or death from
More informationBefore you begin. Introduction Implement and monitor work health and safety procedures 1
Contents Before you begin v Introduction Implement and monitor work health and safety procedures 1 Topic 1 What you need to know about implementing and monitoring WHS procedures 3 1A Emergency and evacuation
More informationConfidence Under Pressure
Confidence Under Pressure Commercial jfdglobal.com Introduction Our vision is to be the unrivalled, first choice partner to commercial, international underwater operators and global defence forces in our
More information2. The purpose of this program is to achieve the following objectives:
Section 16A. Lockout and Tagout Program 1. In the course of their duties, personnel at the TFREC may need to secure controls, switches, and equipment in order to prevent injury caused by the sudden, unexpected
More informationHuman Factor Challenges in International Marine Contracting
Human Factor Challenges in International Marine Contracting Step Change Safety Share Fair Nick Hough, Technical Adviser 22 June 2011, Pittodrie stadium, Aberdeen What is IMCA? International Marine Contractors
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationEmergency Response Plan
Regulatory Citation What It Is Who It Applies To OSHA - 29 CFR 1910.120(q)(1) - Emergency Response Plan Standard improves the ability of employees and employers to respond to emergencies caused by releases
More informationAbout Blue Ocean Strategy
24 December 2008 MEDIA BRIEF About Blue Ocean Strategy Blue Ocean Strategy is the systematic pursuit of new market and demand creation through the simultaneous pursuit of higher value and lower cost. It
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationWORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More informationin Australian Workplaces
Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationCONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
More informationChapter 4: Implementing Effective Exposure Controls
Chapter 4: Implementing Effective Exposure Controls Implementing effective controls to protect workers from health hazards requires attention and dedication. For example, equipment needs to be purchased,
More informationSPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationScope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
More information75 Years of Health and Safety Guidance
H&S Guide: 60 Working Risks Personal Protective Equipment Personal Protective Equipment (also known as PPE) Employers have duties concerning the provision and use of personal protective equipment at work.
More informationN2 Membrane+ Nitrogen Production Systems for Offshore. Where you are. Where you need to be. We are here too.
N2 Membrane+ Nitrogen Production Systems for Offshore Where you are. Where you need to be. We are here too. www.airliquide.com OVERVIEW AIR LIQUIDE OIL AND GAS SERVICES is dedicated to the supply of products
More informationCONTROL OF HAZARDOUS ENERGY LOCKOUT/TAGOUT PROGRAM
CONTROL OF HAZARDOUS ENERGY LOCKOUT/TAGOUT PROGRAM 1.0 REGULATORY AUTHORITY Code of Federal Regulations, 29 CFR 1910.147; California Code of Regulations, Title 8, Sections 2320.1 and 3314; CSU, Fullerton
More informationTABLE OF CONTENTS PART 2 - CONFINED SPACES
May 11, 2006 TABLE OF CONTENTS PART 2 - CONFINED SPACES Page DEFINITIONS... 2-1 GENERAL... 2-2 RESPONSIBILITIES... 2-2 HAZARD ASSESSMENT AND WORK PROCEDURES... 2-3 IDENTIFICATION AND ENTRY PERMITS... 2-3
More informationOperations: HSE. Health and Industrial Hygiene. Laboratory Safe Work Practice
Operations: HSE Health and Industrial Hygiene Laboratory Safe Work Practice Page 2 of 8 AMENDMENT RECORD Amendment Date Revision Number Revision Number 08/11/2016 4 Authority: Health Manager Custodian:
More informationOVERVIEW OF RESTAURANT SAFETY
OVERVIEW OF RESTAURANT SAFETY Restaurants and other eating and drinking businesses employ a very large number of people in the State of California, and many of these employers are under 20 years of age.
More informationLOCKOUT/TAGOUT PLAN August 2015
LOCKOUT/TAGOUT PLAN August 2015 Office of Environmental Health and Safety 423-354-5224 TABLE OF CONTENTS Purpose and Intended Use... 2 A. Types of Energy Sources... 2 B. Activities Requiring Lockout/Tagout
More informationHealth, Safety and Environment Management System. HSE-PRO-008 HSE Responsibilities Procedure
Health, Safety and Environment Management System HSE-PRO-008 HSE Responsibilities Procedure 1 Table of Contents 1 Intent... 3 2 Scope... 3 3 Definitions... 3 4 Duty, Obligations and Responsibilities...
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationINSPECTION & NON-DESTRUCTIVE TESTING
INSPECTION & NON-DESTRUCTIVE TESTING Stork delivers experienced and efficient Inspection and NDT solutions; as a tailored package or a standalone service. WWW.STORK.COM 1 GLOBAL SERVICE WITH A LOCAL PRESENCE
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationHazardous Waste Training Plan. Supersedes: 02/15/16 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager
Procedure No.: PA-033-0006 Page: 1 of 19 Port Arthur, TX. Reviewed: 02/18 Effective: 02/06/18 (Rev.03) Supersedes: 02/15/16 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document
More informationDelaware State University
Delaware State University University Area Responsible: Risk and Safety Management Policy Number and Name: 7-06: Confined Space Policy Approval Date: 7/28/11 Revisions: _8/8/2013 Reviewed: 7/26/2013 Related
More informationThe new CryoEase Service - your No. 1 choice of gas supply
The new CryoEase Service - your No. 1 choice of gas supply The CryoEase Service is an innovative alternative to customers using conventional supply mode. Using the CryoEase Service allows you to enjoy
More informationSafe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant
Health and Safety Executive Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant Background Accidents involving
More informationRISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
More informationNew Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
More informationPreventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
More informationAccidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures
Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury
More informationWelding and Cutting (Hot Work) Operations Self-Audit Checklist. Building Room Supervisor Date
Welding and Cutting (Hot Work) Operations Self-Audit Checklist Building Room Supervisor Date Audit Performed by A. General Welding and Cutting Controls 1. Welding and cutting operations restricted to authorized
More informationLockout/Tagout Program
Purpose Hazardous energy appears in the workplace in the form electrical, mechanical, pneumatic, hydraulic and thermal energy and includes chemical, water, steam and gaseous energy systems. Lockout/Tagout
More informationIntroduction to Emergency Response & Contingency Planning
& Contingency Planning Rationale Why is it important for you to learn this material? Designed for those who may witness a release, this is an introductory course designed to help ensure those who are likely
More informationIron Ore Company of Canada Health, Safety & Environment
Hazardous Materials 1 PURPOSE The entry of all substances onto site is controlled, Banned substances are not admitted, Potential health effects and hazards are identified and controlled, All products are
More informationNewtown Neighbourhood Centre
Policy Name Policy Number 1.10.1.1 Relevant procedures Work Health and Safety All procedures relating to the health, safety and well being of individuals in the workplace are relevant to this policy. Author
More informationHazardous Energy Control (Lockout-Tagout)
Hazardous Energy Control (Lockout-Tagout) The purpose of this program is to prevent inadvertent operation or energization of machines, equipment, or processes in order to protect employees and establish
More informationLockout. HealthandSafetyOntario.ca. What is Lockout? How is a Lockout Done? Why is a Lockout Necessary?
What is Lockout? Lockout means to physically neutralize all energies in a piece of equipment before beginning any maintenance or repair work. Lockouts generally involve: Stopping all energy flows (for
More informationGeotechnics, Face and Stockpile Operations
Quarries National Joint Advisory Committee (QNJAC) Geotechnics, Face and Stockpile Operations Information Sheet 4 October 2012 Duties of the Operator This information sheet has been developed by the Quarries
More informationFLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE
JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT
More informationHazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.
Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled
More informationFebruary 2016 Newsletter No. 21. For the most up-to-date news visit
February 2016 Newsletter No. 21 For the most up-to-date news visit www.nrspp.org.au Welcome to the latest newsletter from the National Road Safety Partnership Program (NRSPP). NRSPP is a government-supported,
More informationIndustry Reputation. Focused Growth
Unit 7 186 Cochlan Dr Morden, Manitoba, R6M1G5 CANADA Phone: 204.822.8106 Toll free in Canada: 866.579.4921 Fax: 204.822.1799 Email: info@on2solutions.ca www.on2solutions.ca COMPANY MEDICAL PROFILE TEAM
More informationA. Evaluation of the written program
A. Evaluation of the written program Begin your audit with an evaluation of the written respiratory protection program. In addition to the operating procedures describing respirator selection and use in
More informationSafe Work Practices and Permit-to-Work System
CHAPTER 24 Safe Work Practices and Permit-to-Work System 24.1 INTRODUCTION OSHA s Process Safety Management (PSM) Standard (OSHA, 1992) requires employers to develop and implement safe work practices (SWPs)
More informationRisk Management Resources
Risk Management Resources Machine Guarding Name: Notes: Electrical Systems: Fire Prevention Are circuit breakers accessible to personnel, protected from physical damage, and located away from ignitable
More informationUniversity of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
More informationControl of Hazardous Energy. Environmental Health and Safety
Control of Hazardous Energy Environmental Health and Safety 11/01/2014 1 CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) OSHA CFR 1910.147 Revised Date: November 2014 STATEMENT OF POLICY Ball State University
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationPersonal Protective Equipment
Northland Community & Technical College June 1, 2017 Personal Protective Equipment Safety Officer Cory Feller Chemical Hygiene Officer Kristel Kizer Telephone: 218-683-8633 1 Personal Protective Equipment
More informationKIERNAN ELECTRICAL SITE INDUCTION. Site Supervisors: Chris Lettice
KIERNAN ELECTRICAL SITE INDUCTION Site Supervisors: Chris Lettice Safety Officer: Lilianne Magner INDUCTION CONTENTS Introduction to company safety policy Scope of Works Site team members Site Layout Site
More informationCampari Group s History
2017 Campari Group s History Campari was founded in 1860 - the year Gaspare Campari invented the bright red bittersweet aperitif in downtown Milan. From 1888 onwards, his successor and son, Davide Campari,
More informationExport Incentives Provided by MATRADE
Export Incentives Provided by MATRADE Seminar on Government Incentives for Manufacturing Sector 26 September 2016 www.matrade.gov.my Malaysia External Trade Development Corporation 1 www.matrade.gov.my
More informationPreventing slips and trips at work. Health and Safety Executive
Preventing slips and trips at work Health and Safety Executive Preventing slips and trips at work Over a third of all major injuries reported each year are caused as a result of a slip or trip (the single
More informationPrint this activity then complete it and keep it as evidence in your folder, or portfolio.
Workplace hazards Workplace Learning and Assessment Activity Workplace Learning and Assessment Activity Print this activity then complete it and keep it as evidence in your folder, or portfolio. Hazard
More informationDURATION: 5 days. CLASS RATIO: 1 Trainer 10 candidates.
WELDING PROGRAMMES METAL INERT GAS (MIG) WELDING METAL ACTIVE GAS (MAG) WELDING MANUAL METAL ARC WELDING OXY-ACETYLENE WELDING AND CUTTING TARGET: This training is recommended for people who are seeking
More informationAgenda. Vestas Wind Systems. Opportunities and challenges in the wind renewable energy sector EU Perspective Vestas Perspective
Agenda Vestas Wind Systems Opportunities and challenges in the wind renewable EU Perspective Vestas Perspective 2 BETS, Opportunities and challenges in the wind renewable, May 11 2010 1 Our Vision Wind
More informationCONFINED SPACE WRITTEN PROGRAM
CONFINED SPACE WRITTEN PROGRAM Maple River Public Schools ISD#2135 Confined Space Entry Plan (Permit Required) Maple River Public School Plan last updated: October, 2014 Authority and Scope Regulation:
More informationUC Irvine Environmental Health & Safety
UC Irvine Environmental Health & Safety SECTION: TITLE: HAZARD IDENTIFICATION AND CORRECTION (RED TAG) PROCESS INITIATOR: David Mori REVISION DATE: 10/12/14 1. Program Description 2. Scope 3. Definitions
More informationDEVELOPING THE GAME GLOBALLY
DEVELOPING THE GAME GLOBALLY World Rugby Vision, Mission, Values and Development Priorities World Rugby Vision, Mission, Values and Priorities The World Rugby Vision Rugby a sport for all, true to its
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationMonash University Academy of Performing Arts Safety Induction
Monash University Academy of Performing Arts Safety Induction Safety induction for the Robert Blackwood Hall Revised August 2013 Welcome to the Monash University Academy of Performing Arts induction for
More informationOCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE
OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE Subject: Installation, Use and Maintenance of Gas Source Semiconductor Tools Date: 5/28/03 Revision: 00 SUMMARY: Individuals working with gas source
More information2013 YKK Asia Group Kids Football Clinic Supporting healthy Growth of Children through Sports A YKK ASIA GROUP CSR Project
2013 YKK Asia Group Kids Football Clinic Supporting healthy Growth of Children through Sports A YKK ASIA GROUP CSR Project Press Release FOR IMMEDIATE RELEASE YKK Holding Asia Pte Ltd (YHA) partners with
More informationM3060 Handling Compressed Gas Cylinders Safely. Leader s Guide
M3060 Handling Compressed Gas Cylinders Safely Leader s Guide WORKING SAFELY WITH COMPRESSED GAS CYLINDERS This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More information2016 OFFSHORE TRAINING AND ASSESSMENT SERVICES
2016 OFFSHORE TRAINING AND ASSESSMENT SERVICES INTRODUCTION ILS is a specialist training and assessment provider operating on a global basis in the offshore oil and gas industry. Our specialist services
More informationSAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
More informationPRINTED COPY IS NOT CONTROLLED Page 1 of 22
The current (electronic) copy of this procedure is found at: Z:/ISDC Procedures and Forms/Current/ (Revision History/Approvals is on last page) 1. PURPOSE The following guidelines are intended to help
More informationSafety Manual Section 6 Confined Space
6. CONFINED SPACE ENTRY Introduction The following sections provide general guidelines and procedures for confined space entry. This section covers the following topics: Topic Page 6.1 Types of s... 6-2
More informationUnique Group employs over 450 people worldwide through its seven multi-site divisions: Survey Equipment. Marine & Subsea. Diving & Life Support
As an independently owned global company, Unique Group leads the way in providing engineering expertise, sales and rental equipment and the latest technology for the marine, diving, pipeline and subsea
More informationIndustrial Relations
Industrial & Management Engineering Department Industrial Relations IM 111 Dr Yehia Youssef IM111 Lecture 7 1 Definitions Hazard: A hazard is anything that can cause harm to people. Examples are dangerous
More informationWritten Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
More informationScissor Lift Safety Policy Training Course (GS600) Material
Introduction Welcome to the Scissor Lift Safety (GS600) Policy Training Course. This training is for all individuals who work in scissor lifts as a part of their duties. This course is to provide general
More information21 Confined Spaces Policy Statement Responsibilities. Confined Spaces Employer Responsibilities
21 Confined Spaces 21.1 Policy Statement [Company Name] is committed to a safe, healthful workplace for its employees. Confined work spaces that present hazards to workers demand controls to reduce exposure
More informationPage: 7/15/2009. Energy control procedures Use of lockout/tagout equipment to ensure safe work practices.
1 of 6 1.0 PURPOSE This program applies to the installation, service, maintenance, or removal of any type of machinery, equipment, or components, in which the unexpected start up or release of stored energy
More informationSHOP SAFETY INSPECTIONS
SHOP SAFETY INSPECTIONS SOP No 1.014 1 PURPOSE 1.01 This document details the procedures and forms to be used when performing safety inspections for shops. 2 EXPECTATIONS 2.01 Shops and storage closets
More informationLecture Demonstrations Safety Manual & New Staff Induction
Lecture Demonstrations Safety Manual & New Staff Induction Overview The lecture demonstrations team provides and maintains demonstrations to lectures, tutorials and outreach. Demonstrations and equipment
More informationWorking Alone Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared
More informationWorking Alone. Latest revised date: October 26, 2011 Page 1 of 7 Prepared by: Department of Health & Safety S-014
Working Alone Latest revised date: October 26, 2011 Page 1 of 7 1.0 Introduction Memorial will establish specific practices and procedures to minimize the risks of injury or violence to staff, faculty,
More informationIncrease safety in the workplace
Increase safety in the workplace Serious accidents can easily happen in the workshop or on construction sites, so keeping yourself and others safe at work is vital. Your supervisor has asked you to prepare
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationMaterial Lift Risk and Hazard Management
Material Lift Risk and Hazard Management Models GH 3.8 Safe 136 kg Maximum 3.80 m GH5.6 Working 113 kg Lifting 5.60 m LL Load (kg) 91 kg Height (m) 1.70 m GL-4 227 kg 1.80 m GL-8 181 kg 3.06 m GL-10 159
More informationLO/TO LOCKOUT/TAGOUT PROGRAM
LO/TO LOCKOUT/TAGOUT PROGRAM April 2017 CONTENTS Section 1: Introduction...1 Section 2: Purpose... 1 Section 3: Application... 1 Section 4: Definitions... 2 Section 5: Roles and Responsibilities... 4 Section
More informationTrifecta Systems. Cryogenic Equipment for High Performance Gas Supply. Trifecta Product Catalog
Trifecta Systems Cryogenic Equipment for High Performance Gas Supply C O N S U LT I N G S Y S T E M D E S I G N I N S TA L L AT I O N C O M M I S S I O N I N G T R A I N I N G Trifecta Product Catalog
More informationCOMPLIANCE GUIDELINES FOR. Departmental Health and Safety Inspections
COMPLIANCE GUIDELINES FOR Departmental Health and Safety Inspections CONTENTS 1 INTRODUCTION...1 2 WHY INSPECTION...1 3 OBJECTIVES AND METHODS...2 3.1 Safety Tours...2 3.2 Safety Inspection...2 3.3 Other
More informationPARTS, SERVICE & REPAIR BULLETIN
WH4C PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY WELDING HANDLE Manual No: 0056-3763 Issue Date: October 07, 03 Revision: AA VictorTechnologies.com Table of Contents SECTION : GENERAL SAFETY
More informationHazard Communication Program
The University of Memphis Hazard Communication Program November 2016 Table of Contents University of Memphis Hazard Communication Program Contents Purpose... 1 Scope and Application... 1 Responsibilities...
More informationSAFETY FEATURES OF PORTABLE CRYOGENIC LIQUID CONTAINERS FOR INDUSTRIAL AND MEDICAL GASES
SAFETY FEATURES OF PORTABLE CRYOGENIC LIQUID CONTAINERS FOR INDUSTRIAL AND MEDICAL GASES AIGA 016/04 Asia Industrial Gases Association 298 Tiong Bahru Road, #20-01 Central Plaza, Singapore 168730 Tel :
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM INTERNAL AND EXTERNAL PAGE: 1 DEPARTMENT: ALL OF: 5
INTERNAL AND EXTERNAL PAGE: 1 1.0 OBJECTIVE The Federal Occupational Safety and Health Administration (OSHA) requirements for personal protective equipment (PPE) are presented in 29 CFR 1910.132 General
More informationLockout/Tagout Safety Policy
University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Lockout/Tagout Safety Policy GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized by UNCW
More information