PFA Fluid Handling System

Transcription

1 hem Technical hem & Fittings Page PDF Published pril 1, 2015 PF Suitable for Flaring 2 Technical Specifications 2-4 Flaring Tools 5 Flaring Process 6 PF Fluid Handling System hem PF & Fittings Fittings Male & Female onnectors 7-9 Straight Unions Reduced Fittings 12 Fittings Double ontainment Fittings 14 Elbows & Sweeps Tees Multi- Fittings 28 Transition Fittings 29 Plug, Nuts & aps daptors 31 Sanitary Ends 32 utters & Tools 32 04/15 hemline Plastics Limited 2015 hemline is a registered trademark of hemline Plastics Limited hem, hemgrip, hemond are registered trademarks of hemline Flow ontrol Limited ISO 9001:2008 ertified 55 Guardsman Road Thornhill, Ontario anada, L3T 6L2 t f request@chemline.com

2 PF Tubing Technical hemline PF (perfluoroalkoxy) is the Teflon tubing of choice for applications involving extreme chemical resistance combined with high temperature exposure. PF tubing is made exclusively from the highest molecular weight resin available giving it superior physical properties. PF tubing is suitable for even the most demanding applications. Industrial Grade PF Imperial (suitable for flaring) TT TT TT TT TT O.D. Wall Thickness end Radius For high purity tubing, add HP after the above item number Vacuum Service hemline recommends using wall tubing at ambient temperature, with minimum bends for service down to 7.5 psi of vacuum. Working Pressure 22o(72oF) pressure vs. temperature PF Tubing Percent of Rated Operating Pressure Technical Specifications o of Operating Temperature ( o / o F) Warning: Not for use in applications exceeding 120 o (248 o F) PF features 100% virgin grade high performance resins used to resist stress cracking hemically inert to nearly all industrial chemicals and solvents Higher thermal stability than with FEP Lower permeability than with FEP Translucent Moisture absorption nearly zero FD compliant for food contact Non-flammable Tubing is suitable for use with flare or conventional fittings Tubing is available in coiled hose and convoluted constructions Low permeation PF tubing and pipe are also available Semiconductor grade PF is also available PF specifications General: hemline PF meets or exceeds the requirements listed in S D Temperature: 300 F to 500 F Flammability: UL 94 VO rated. hemline PF tubing resists combusion and does not promote flame spread FD: hemline PF is approved for the use in food contact applications in compliance with FD regulation: 21 FR USP lass VI: hemline PF tubing meets the requirements of UPS lass VI PF applications hemical process Heat exchangers Laboratory applications Semiconductor Flow monitoring Emissions monitoring Double containment systems Food processing Electrical insulation utomotive hose utomotive paint spray Sodium isulfite and Sodium Hypochlorite chemical feed systems PF physical properties S test values Upper Service Temperature 260 (500 F) Specific Gravity D Tensile Strength D PSI Elongation D % Flex Modulus D ,000 PSI MIT Flex Life D ,000+ Hardness D Shore D 2 F Technical

3 hem PF Fittings Technical pressure vs. temperature Pressure ratings based on wall for fittings and wall for,, and. PF Fittings 300 2, & 1,724 Pressure (psi) ,379 1, Pressure (kpa) o of Operating Temperature ( o / o F) Warning: Not for use in applications exceeding 120 o (248 o F). hem PF tube fittings bring to the Semiconductor, iotech, Pharmaceutical and Ultra Pure Water industries an innovative and economical way of dispensing high-purity fluids. Quality Every hem fitting is manufactured from high purity PF resin, providing chemical resistance and high purity. PF is well known for use in ultra-pure water and chemical applications and is Semi-F compliant. Efficiency Our Sweep Elbows have a fully swept flow path allowing up to 300% more flow than standard elbows. Size Range Size range is from to 1- in all the popular fitting configurations. Special fitting configurations are available on a custom basis. Precise ssembly Our TruFLRE Flaring System allows for precise and repeatable tube flares, making flare fitting assemblies easier, more cost effective and more convenient. ompatibility hem fittings are compatible and interchangeable with all other Fine Thread Fitting systems. The fittings can be used with PF, FEP and PTFE tubing. Patented FLRE Technology Our proprietary technology creates repeatable and precise Female assemblies. Molding Only dedicated molds and process equipment are used for high purity production. This eliminates the possibility of cross-contamination, thus assuring Quality without compromise. High Purity State-of-the-art tube fittings are ideal for UPW (Ultra Pure Water) and semiconductor grade chemical applications. Packaging leaning and packaging are proprietary processes conducted in a lass 1000 clean room using a five-stage cleaning and rinsing process. Fittings are packaged in a double polyethylene bags, ensuring the highest level of protection and contamination control. F Technical 3

4 hem PF Fittings Hex Technical hem end connectors hem End onnector Nut d End onnections tube vs. tight flare hem End onnections hem end connection have the standard male spigot which goes inside the flared tube. They come standard with the nut that goes over the tube before flaring. The dimension is shown in the charts as. D hem End onnections hem end connection have the female flare that accepts the male spigot of another fitting. They are used to reduce the distance between fittings (ie tight flare). They come standard with the nut that go onto the male spigot. This nut comes attached to the fitting. They are shown in the charts as. Shown without captive Nuts. End onnections recommended nut torque setting O.D. Wall Thickness (in.) Minimum Torque (in.-lb.) Maximum Torque (in.-lb.) F Technical

5 Flaring Tools Technical Tru PF tube flaring system fitting flaring tools Universal Tool heating tools The TF416 hemflaring Tool is a bench-top molding machine for the production of flares directly onto PF tubing from to in any location. These hem tube ends work with hemline s line of hem fittings to provide smooth, safe and long term leak-free connections for difficult applications such as sodium hypochlorite. These flared end connections are easy to install and allow for compact plumbing and a small footprint. The semi-automated function ensures proper timing and temperature for each size of PF tubing while at the melt stage, and the correct pressure while at the hem forming stage, while manual operation is reduced to moving between the melt head and the molding head, and operating the flange forming clamp. The hemflaring tool is comprised of a base, control panel, on/off switch, end-of-cycle alarm, automated timer, melt head with all sizes of tube heaters, locking flange forming head with all sizes of hem forms, depth gauge and power cable. rugged wheeled thermoplastic case serves for the transport and the protected storage of the complete sanitary flange former and accessories. The flange former and transport case is 36/51/61 cm and weighs 17Kg / 38.0 lbs. Hot ir Gun F Technical 5

6 Flaring Process Technical The flaring process provides a permanent expansion (flare) of the tubing end, allowing insertion of the hem fitting body. Proper tube flaring and hem fitting assembly results in a secure tubing connection. Note: The tubing cools rapidly so please read and understand all instructions before flaring your tubing. Tubing Preparation ut the tubing end squarely (.070 maximum squareness tolerance) using a tubing cutter. Insert the cut end of the tubing through the non threaded end of the nut. Warning: If you do not put the nut on the tube now you will not be able to put it on after you complete the flare. Heat Flaring Instructions 1. If using an hot air gun, set the hot air gun on high. Hold the PF tubing end flush with the heater edge and to above the heater and slowly rotate the tubing 360 for the approximate time specified in Table 1 or until a fine, clear line appears around the tubing. Note: It is very important to fully rotate the tubing over the heat source so all surface areas receive an equal amount of heat. Uniform heating is essential to making a good flare. If using an infrared heating tool, turn on heating tool. enter to of the PF tubing between the heat rings. While slowly rotating the PF tubing back and forth between your forefinger and thumb, heat for the approximate time specified in Table 1 or until a fine, clear line appears around the tubing. Note: To flare tubing with an infrared heating tool, a larger heat ring (part number or ) is needed. Note: It is very important to rotate the tubing through the heat source so all surface areas receive an equal amount of heat. Uniform heating is essential to making a good flare. 2. Remove the PF tubing from the heat source. Immediately push the flaring mandrel into the tubing until the end of the tubing reaches the tube stop. Note: Flaring tubing is the most challenging because of its small size. To get a firm grip on the small tube diameter, we recommend using the grip pad that is included in the mandrel kit (for additional grip pad, part number ). 3. Firmly hold the tubing onto the mandrel for the time specified in Table Let the flared tubing continue to cool on the mandrel for the time specified in Table The flaring process is now complete and the mandrel may be removed from the tube. Room Temperature Flaring Instructions Reference Room Temperature Flaring Tool instructions that accompany each Room Temperature Flaring Tool Kit (part number ). Fitting ssembly Instructions Push the flared tubing end onto the hem fitting body until the end of the fitting body contacts the flare shoulder of the tube The maximum gap between the tube end and end of threads should be en the nut onto the fitting body until hand tight (see Table 1 for recommended minimum torque values). Retightening ll fitting connections assembled using the Room Temperature flaring technique should be retightened to the minimum nut torque values identified in Table 1. ll SpaceSaver fitting connections exposed to temperatures >165 F should be retightened to the minimum nut torque values identified in Table 1 (fitting must be returned to room temperature before retightening). Table 1 Tubing & Fitting Size Heating time for PF (sec.) ir gun Heating time for PF (sec.) Infrared heater Hold tubing on flare mandrel (sec.) Minimum cooling time on mandrel (min.) Minimum nut torque (inch.lbs. ((N m)) PF fitting/pvdf nut Minimum nut torque (inch.lbs. ((N m)) PF fitting/pf nut Minimum nut torque (inch.lbs. ((N m)) PF fitting/pf nut Minimum nut torque (inch.lbs. ((N m)) PVDF fitting/pvdf nut (7) 5 (7) 5 (7) 5 (7) (0.90) 8 (0.90) 8 (0.90) 8 (0.90) (1.24) 11 (1.24) 11 (1.24) 11 (1.24) (1.58) 14 (1.58) 14 (1.58) 19 (2.14) (3.39) 30 (3.39) 30 (3.39) 40 (4.51) 6 F Technical

7 Fittings Male onnector F-M4-2N-1 F-M4-4N-1 F-M4-6N-1 F-M4-8N-1 F-M4-12N-1 F-M4-16N-1 F-M6-2N-1 F-M6-4N-1 F-M6-6N-1 F-M6-8N-1 F-M6-12N-1 F-M6-16N-1 F-M8-2N-1 F-M8-4N-1 F-M8-6N-1 F-M8-8N-1 F-M8-12N-1 F-M8-16N-1 F-M12-6N-1 F-M12-8N-1 F-M12-12N-1 F-M12-16N-1 F-M16-8N-1 F-M16-12N-1 F-M16-16N-1 F-M20-16N-1 F-M20-120N-1 MNPT 1/8 1/8 1/ HEX 5/8 5/8 11/ hem PF Fittings F Technical 7

8 Male onnector F-M4T-2N-1 F-M4T-4N-1 F-M4T-6N-1 F-M4T-8N-1 F-M6T-4N-1 F-M6T-6N-1 F-M6T-8N-1 F-M8T-4N-1 F-M8T-6N-1 F-M8T-8N-1 F-M12T-8N-1 F-M12T-12N-1 MNPT 1/ HEX 5/8 5/8 Male onnector Panel Mount F-MPM4-2N-1 F-MPM4-4N-1 F-MPM4-6N-1 F-MPM6-4N-1 F-MPM6-6N-1 F-MPM8-4N-1 F-MPM8-6N-1 F-MPM8-8N-1 F-MPM12-12N-1 F-MPM16-16N-1 MNPT 1/ D (max) HEX 1 1-1/16 1-1/16 1-1/ HEX 2 11/16 11/16 11/16 1-5/16 Fittings 8 F Technical hem PF Fittings

9 F Technical 9 Fittings Male onnector JIS F-M4-4JN-1 F-M4-6JN-1 F-M4-8JN-1 F-M6-4JN-1 F-M6-6JN-1 F-M6-8JN-1 F-M8-4JN-1 F-M8-6JN-1 F-M8-8JN-1 F-M8-12JN-1 F-M12-6JN-1 F-M12-8JN-1 F-M12-12JN-1 F-M12-16JN-1 F-M16-12JN-1 F-M16-16JN-1 JIS Size HEX 5/8 11/16 Female onnector F-F4-2N-1 F-F4-4N-1 F-F4-6N-1 F-F4-8N-1 F-F6-4N-1 F-F6-6N-1 F-F6-8N-1 F-F8-4N-1 F-F8-6N-1 F-F8-8N-1 F-F8-12N-1 F-F8-16N-1 F-F12-8N-1 F-F12-12N-1 F-F12-16N-1 F-F16-16N-1 FNPT 1/ HEX 5/8 1-1/8 1-1/8 1-1/ /8 1-1/ /8 1-5/8 hem PF Fittings

10 hem PF Fittings Fittings Straight Union F-SU44N-1 F-SU66N-1 F-SU88N-1 F-SU1212N-1 F-SU1616N-1 F-SU2020N HEX 11/16 1- Straight Union x F-SU44TN-1 F-SU66TN-1 F-SU88TN-1 F-SU1212TN-1 F-SU1616TN HEX 11/16 10 F Technical

11 hem PF Fittings Fittings Straight Union Reducer F-SU64N-1 F-SU84N-1 F-SU86N-1 F-SU124N-1 F-SU126N-1 F-SU128N-1 F-SU168N-1 F-SU1612N HEX 11/16 Straight Union Panel Mount F-SPM44N-1 F-SPM66N-1 F-SPM88N-1 F-SPM1212N-1 F-SPM1616N D (max) HEX 1 1-1/16 1-5/16 1- HEX 2 11/16 1-5/8 Straight Union Panel Mount Reducer F-SPM64N-1 F-SPM84N-1 F-SPM86N-1 F-SPM126N-1 F-SPM128N-1 F-SPM1612N D (max) HEX 1 1-1/16 1-1/16 1-5/16 1-5/16 1- HEX 2 1-5/8 F Technical 11

12 hem PF Fittings Fittings Reduced Fittings Straight Union F-SU44N-1x HEX 11/16 Reduced Fittings Male onnector F-M4-2N-1x.030 MNPT 1/ HEX 5/8 Shown without captive Nuts. Union F-TFU4N-1 F-TFU6N-1 F-TFU8N-1 F-TFU12N-1 F-TFU16N D F Technical

13 hem PF Fittings Fittings Reducer F-TFFR64N-1 F-TFFR84N-1 F-TFFR86N-1 F-TFFR124N-1 F-TFFR126N-1 F-TFFR128N-1 F-TFFR164N-1 F-TFFR166N-1 F-TFFR168N-1 F-TFFR1612N Reducer F-TFMR64N-1 F-TFMR84N-1 F-TFMR86N-1 F-TFMR124N-1 F-TFMR126N-1 F-TFMR128N-1 F-TFMR164N-1 F-TFMR166N-1 F-TFMR168N-1 F-TFMR1612N F Technical 13

14 hem PF Fittings Fittings Increaser F-TFMI46N-1 F-TFMI48N-1 F-TFMI68N-1 F-TFMI612N-1 F-TFMI812N-1 F-TFMI816N-1 F-TFMI1216N HEX Primary O.D. ontainment O.D. Double ontainment Fittings Panel Mount Double ontainment with O-Ring ontainment Seal F-PM44D8N-1 F-PM66D12N-1 F-PM88D12N-1 F-PM1212D16N-1 Primary O.D. ontainment O.D D HEX 1 1-5/16 1-1/16 1-5/16 HEX 2 11/16 Panel Hole 5/8 Primary O.D. ontainment O.D. PVDF Double ontainment daptor F-D48 F-D612 F-D812 F-D1216 Primary O.D. ontainment O.D HEX 1-9/16 14 F Technical

15 F Technical 15 Male Elbow F-ME4-2N-1 F-ME4-4N-1 F-ME4-6N-1 F-ME4-8N-1 F-ME6-2N-1 F-ME6-4N-1 F-ME6-6N-1 F-ME6-8N-1 F-ME6-12N-1 F-ME8-2N-1 F-ME8-4N-1 F-ME8-6N-1 F-ME8-8N-1 F-ME8-12N-1 F-ME8-16N-1 F-ME12-6N-1 F-ME12-8N-1 F-ME12-12N-1 F-ME12-16N-1 F-ME16-12N-1 F-ME16-16N-1 MNPT 1/8 1/8 1/ Fittings Male Elbow JIS F-ME4-4JN-1 F-ME4-6JN-1 F-ME6-4JN-1 F-ME6-6JN-1 F-ME6-8JN-1 F-ME8-4JN-1 F-ME8-6JN-1 F-ME8-8JN-1 F-ME8-12JN-1 F-ME12-8JN-1 F-ME12-12JN-1 F-ME12-16JN-1 F-ME16-12JN-1 F-ME16-16JN-1 JIS Size hem PF Fittings

16 Female Elbow F-FE4-2N-1 F-FE4-4N-1 F-FE4-6N-1 F-FE4-8N-1 F-FE6-4N-1 F-FE6-6N-1 F-FE6-8N-1 F-FE8-4N-1 F-FE8-6N-1 F-FE8-8N-1 F-FE8-12N-1 F-FE12-8N-1 F-FE12-12N-1 F-FE16-16N-1 FNPT 1/ Union Elbow Reducer F-UE64N-1 F-UE84N-1 F-UE86N-1 F-UE124N-1 F-UE126N-1 F-UE128N-1 F-UE168N-1 F-UE1612N Union Elbow F-UE44N-1 F-UE66N-1 F-UE88N-1 F-UE1212N-1 F-UE1616N-1 F-UE2020N Fittings 16 F Technical hem PF Fittings

17 F Technical 17 Fittings Union Elbow Panel Mount F-EPMX44N-1 F-EPMX66N-1 F-EPMX88N-1 F-EPMX1212N-1 Min Panel Hole Diameter 5/ D (Max) HEX 1-1/16 1-5/16 Union Elbow x F-UE44TN-1 F-UE46TN-1 F-UE48TN-1 F-UE64TN-1 F-UE66TN-1 F-UE68TN-1 F-UE612TN-1 F-UE84TN-1 F-UE86TN-1 F-UE88TN-1 F-UE812TN-1 F-UE816TN-1 F-UE128TN-1 F-UE1212TN-1 F-UE1216TN-1 F-UE1612TN-1 F-UE1616TN hem PF Fittings

18 hem PF Fittings Fittings Male Elbow O.D. MNPT F-ME4T-4N F-ME6T-6N F-ME8T-8N F-ME12T-12N F-ME16T-16N Union Elbow F-UE4TN-1 F-UE6TN F-UE8TN F-UE12TN F-UE16TN-1 Union Elbow Reducer 1 2 F-UE6T4TN F-UE8T4TN F-UE8T6TN F-UE12T8TN F-UE16T12TN F Technical

19 hem PF Fittings Fittings Union Elbow Sweep F-UES44N-1 F-UES66N-1 F-UES88N-1 F-UES1212N-1 F-UES1616N Union Elbow Sweep x F-UES44TN-1 F-UES66TN-1 F-UES88TN-1 F-UES1212TN-1 F-UES1616TN Union Elbow Sweep F-UES4TN-1 F-UES6TN-1 F-UES8TN-1 F-UES12TN-1 F-UES16TN F Technical 19

20 hem PF Fittings Fittings Male Elbow Sweep F-MES4T-4N-1 F-MES6T-6N-1 F-MES8T-8N-1 F-MES12T-12N-1 F-MES16T-16N-1 MNPT Male Elbow Sweep F-MES4-4N-1 F-MES6-6N-1 F-MES8-8N-1 F-MES12-12N-1 F-MES16-16N-1 MNPT F Technical

21 F Technical 21 Fittings Union Tee Reducer F-UT4-6-4N-1 F-UT4-8-4N-1 F-UT6-4-4N-1 F-UT6-4-6N-1 F-UT6-6-4N-1 F-UT6-8-6N-1 F-UT8-4-4N-1 F-UT8-4-8N-1 F-UT8-6-6N-1 F-UT8-6-8N-1 F-UT8-8-4N-1 F-UT8-8-6N-1 F-UT8-12-8N-1 F-UT N-1 F-UT N-1 F-UT12-8-8N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 F-UT N-1 X Y Z hem PF Fittings

22 Union Tee F-UT4N-1 F-UT6N-1 F-UT8N-1 F-UT12N-1 F-UT16N-1 F-UT20N Union Tee ( ) ranch F-UT4-4T-4N-1 F-UT4-6T-4N-1 F-UT6-4T-6N-1 F-UT6-6T-6N-1 F-UT6-8T-6N-1 F-UT8-4T-8N-1 F-UT8-6T-8N-1 F-UT8-8T-4N-1 F-UT8-8T-8N-1 F-UT8-12T-8N-1 F-UT12-4T-12N-1 F-UT12-6T-12N-1 F-UT12-8T-8N-1 F-UT12-8T-12N-1 F-UT12-12T-8N-1 F-UT12-12T-12N-1 F-UT12-16T-12N-1 F-UT16-8T-16N-1 F-UT16-12T-16N-1 F-UT16-16T-16N-1 X Y Z For D Dimension: 4T=, 6T=0.68, 8T=0.73,12T=0.87,16T= Fittings 22 F Technical hem PF Fittings

23 hem PF Fittings Fittings Union Tee ( ) Run X Y Z 1 2 F-UT4-4-4TN F-UT4-8-8TN F-UT6-4-6TN F-UT6-6-6TN F-UT TN F-UT8-4-8TN F-UT8-6-8TN F-UT8-8-6TN F-UT8-8-8TN F-UT TN F-UT TN F-UT TN F-UT TN F-UT TN F-UT TN For D Dimension: 4T=, 6T=0.68, 8T=0.73,12T=0.87,16T= F Technical 23

24 hem PF Fittings Fittings Union Tee ( ) ranch, Run X Y Z 1 2 F-UT4-4T-4TN F-UT6-4T-6TN F-UT6-6T-6TN F-UT8-8T-8TN F-UT8-12T-12TN F-UT12-8T-12TN F-UT12-12T-8TN F-UT12-12T-12TN F-UT16-12T-12TN F-UT16-16T-12TN F-UT16-16T-16TN For D Dimension: 4T=, 6T=0.68, 8T=0.73,12T=0.87,16T= Union Tee ( ) Run, Run X Y Z 1 2 F-UT4T-4-4TN F-UT4T-6-4TN F-UT6T-6-6TN F-UT6T-8-6TN F-UT8T-6-6TN F-UT8T-8-4TN F-UT8T-8-8TN F-UT8T-12-8TN F-UT12T-4-12TN F-UT12T-6-12TN F-UT12T-8-12TN F-UT12T-12-12TN F-UT16T-8-16TN F-UT16T-12-16TN F-UT16T-16-16TN For D Dimension: 4T=, 6T=0.68, 8T=0.73,12T=0.87,16T= 24 F Technical

25 F Technical 25 Fittings Union Tee ( ) ll X Y Z Male Run Tee F-MRT44-2N-1 F-MRT44-4N-1 F-MRT44-6N-1 F-MRT66-2N-1 F-MRT66-4N-1 F-MRT66-6N-1 F-MRT66-8N-1 F-MRT88-6N-1 F-MRT88-8N-1 F-MRT1212-6N-1 F-MRT1212-8N-1 F-MRT N-1 F-MRT N-1 X Y MNPT Z 1/8 1/ F-UT4TN-1 F-UT4T-6T-4TN-1 F-UT6TN-1 F-UT6T-8T-4TN-1 F-UT8TN-1 F-UT8T-8T-4TN-1 F-UT8T-12T-8TN-1 F-UT12TN-1 F-UT12T-6T-12TN-1 F-UT12T-8T-12TN-1 F-UT12T-12T-8TN-1 F-UT16TN-1 For D Dimension: 4T=, 6T=0.68, 8T=0.73,12T=0.87,16T= Y Z X hem PF Fittings

26 Male ranch Tee F-MT44-2N-1 F-MT44-4N-1 F-MT44-8N-1 F-MT64-4N-1 F-MT64-6N-1 F-MT66-2N-1 F-MT66-4N-1 F-MT66-8N-1 F-MT66-6N-1 F-MT84-8N-1 F-MT86-6N-1 F-MT86-8N-1 F-MT88-4N-1 F-MT88-6N-1 F-MT88-8N-1 F-MT88-12N-1 F-MT1212-4N-1 F-MT1212-8N-1 F-MT N-1 F-MT1616-4N-1 F-MT1616-6N-1 F-MT1616-8N-1 F-MT N-1 F-MT N-1 X MNPT Z 1/8 1/ Y Z Y X Fittings 26 F Technical hem PF Fittings

27 hem PF Fittings Fittings X Z Y Male ranch Tee F-MT12T-12T-8N-1 X Y MNPT Z Z X Y Female ranch Tee F-FT1212-4N-1 F-FT1616-4N-1 F-FT1616-8N-1 X Y FNPT Z F Technical 27

28 hem PF Fittings Fittings 4 Ports Shown PVDF Multi- Panel Mount Ports D (Max) HEX 1 HEX 2 Hole Size Required F-MSUPM /8 F-MSUPM /8 F-MSUPM F-MSUPM /8 1-6 Ports Shown PVDF Multi- Male onnector MNPT Ports HEX F-MM F-MM F-MM F-MM F-MM F-MM F-MM F-MM /8 3 Ports Shown PVDF Multi- Transition Fitting Pipe Ports D HEX F-MTSF4-20MM-2 20mm F-MTSF4-20MM-3 20mm F-MTSF4-25MM-2 25mm F-MTSF4-25MM-3 25mm F-MTSF4-25MM-4 25mm F-MTSF4-32MM-3 32mm F-MTSF4-32MM-4 32mm F-MTSF4-32MM-6 32mm /8 28 F Technical

29 hem PF Fittings Fittings PVDF Transition Fitting x Metric Pipe F-TSF4-20MM F-TSF4-25MM F-TSF6-20MM F-TSF6-25MM F-TSF8-20MM F-TSF8-25MM F-TSF8-32MM F-TSF8-40MM F-TSF12-20MM F-TSF12-25MM F-TSF12-32MM F-TSF12-40MM F-TSF16-25MM F-TSF16-32MM F-TSF16-40MM F-TSF16-50MM F-TSF16-63MM F-TSF20-40MM F-TSF20-50MM F-TSF20-63MM Pipe 20mm 25mm 20mm 25mm 20mm 25mm 32mm 40mm 20mm 25mm 32mm 40mm 25mm 32mm 40mm 50mm 63mm 40mm 50mm 63mm D Plug & Nut Plug Plug & Nut Plug & PVDF Nut Plug Only F-FP4 F-FP6 F-FP8 F-FP12 F-FP HEX 5/8 Plug & Nut F-FP4N-1 F-FP6N-1 F-FP8N-1 F-FP12N-1 F-FP16N HEX 5/8 F Technical 29

30 hem PF Fittings PF Fittings PVDF PF Nut PVDF Nut F-N4-3 F-N6-3 F-N8-3 F-N12-3 F-N F-N4-1 F-N6-1 F-N8-1 F-N12-1 F-N ap F-FP4 F-FP6 F-FP8 F-FP12 F-FP F Technical

31 hem PF Fittings daptors Flange daptors Flange to hem PV Flange F-F.005-8N-1 F-F N-1 F-F N-1 Pump daptors Pump Outlets to hem PV Thread F-P.FM20-4N-1 Female M20 F-P.FM20-6N-1 Female M20 F-P.FM20-8N-1 Female M20 F-P.MM20-4N-1 Male M20 F-P.MM20-6N-1 Male M20 F-P.MM20-8N-1 Male M20 F-P.STF003-4N-1 Straight Female F-P.STF003-6N-1 Straight Female F-P.S001-6N-1 1/8 Straight Male F-P.S003-4N-1 Straight Male F-P.S003-6N-1 Straight Male Pipe daptors Pipe End to hem PV Socket F-PIPEDPT005-6N-1 Female F-PIPEDPT005-8N-1 Female F-PIPEDPT007-12N-1 Female F-PIPEDPT010-12N-1 Female F-PIPEDPT010-16N-1 Female Spigot daptors Socket daptors to hem PV Spigot F-SPIGOT-005-8N-1 Male F-SPIGOT N-1 Male F-SPIGOT N-1 1- Male F Technical 31

32 hem PF Fittings Fittings/Tools Male onnector x Sanitary End F-M4-MINI F-M6-MINI F-M8-MINI F-M8-MXI F-M12-MINI F-M12-MXI F-M16-MINI F-M16-MXI O.D. Sanitary Size MINI MINI MINI MXI MINI MXI MINI MXI HEX 7/8 7/8 7/8 1-1/8 Union Elbow x Sanitary End F-UE12-MINI F-UE12-MXI F-UE16-MINI F-UE16-MXI O.D. Sanitary Size MINI MXI MINI MXI utters Size Range 1/16 to 1/16 to 1/8 to 1- Tools Size Grip Tool Rubber pad to help grip the tube for manual flaring Universal Tool Includes,, and tube sizes Hot ir Gun Heater 115V/60Hz 32 F Technical

33 hem notes notes F Technical 33

34 PF Fluid Handling System hem PF & Fittings ISO 9001:2008 ertified 55 Guardsman Road Thornhill, Ontario anada, L3T 6L2 t f