See Plastic Pipe Engineering Guide for additional information

Transcription

1 Schedule 40 PVC Pipe Dimensions & Pressure Ratings Schedule 40 Pipe om. Pipe Size (in) O.D. Average I.D. in. Wall ominal Wt./Ft. aximum W.P. PSI* 1/ / / / / / / / / aximum PVC Service Temperature 140 F Spears does not recommend threading Schedule 40 Pipe. Use Schedule 40 ale Adapters, Schedule 40 Female Adapters or Spears Special Reinforced (SR) Female Adapters PVC Pipe Operating Temp ( F) De-Rating Factor See Plastic Pipe Engineering uide for additional information Page 49 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

2 Schedule 40 Product Overview PVC Schedule 40 Fittings & Accessories TECICA IFORATIO WEITS & DIESIOS Contact Spears for any information not found. ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 50 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

3 Schedule 40 Product Overview Performance Engineered & Tested SPEARS Schedule 40 PVC fitting designs combine years of proven experience with computer generated stress analysis to yield the optimum physical structure and performance for each fitting. aterial reinforcement is uniformly placed in stress concentration areas for substantially improved pressure handling capability. Resulting products are subjected to numerous verification tests to assure the very best PVC fittings available. Full 1/4" Through 14" Availability Spears comprehensive line of PVC fittings offers a variety of injection molded configurations in Schedule 40 sizes 1/4" through 14" conforming to AST D Exceptional Chemical & Corrosion Resistance Unlike metal, PVC fittings never rust, scale, or pit, and will provide many years of maintenance-free service and extended system life. igh Temperature Ratings PVC thermoplastic can handle fluids at service temperatures up to 140 F (60 C), allowing a wide range of process applications, including corrosive fluids. ower Installation Costs Substantially lower material costs than steel alloys or lined steel, combined with lighter weight and ease of installation, can reduce installation costs by as much as 60% over conventional metal systems. igher Flow Capacity Smooth interior walls result in lower pressure loss and higher volume than conventional metal fittings. Additional Fabricated Configurations through 36" Extra large, hard-to-find, and custom configurations are fabricated from SF Certified pipe. Fittings are engineered and tested to provide full pressure handling capabilities according to Spears specifications. PVC Valves SPEARS PVC Valve products are available for total system compatibility and uniformity. Advanced Design Specialty Fittings Spears wide range of innovative, improved products include numerous metal-to-plastic transition fittings and unions with Spears patented special reinforced (SR) plastic threads. 1/2" Through 16" Industrial Pipe Availability Spears premium quality Industrial PVC pipe is offered in Schedule 40 White sizes 1/2" through 16". Sample Engineering Specifications All PVC Schedule 40 fi ttings shall be produced by Spears anufacturing Company from PVC Type I cell classifi cation 12454, conforming to AST D All injection molded PVC Schedule 40 fi ttings shall be Certifi ed for potable water service by SF International and manufactured in strict compliance to AST D All fabricated fittings shall be produced in accordance with Spears eneral Specifi cations for Fabricated Fittings. Page 51 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

4 Schedule 40 Product Overview The information contained in this publication is based on current information and Product design at the time of publication and is subject to change without notification. Our ongoing commitment to product improvement may result in some variation. o representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or results to be obtained therefrom. For verification of technical data or additional information not contained herein, please contact Spears Technical Services Department [West Coast: (818) East Coast: (678) ]. Recommendations For Installers And Users eneral Information Plastic piping systems should be EIEERED, ISTAED and OPERATED in accordance with ESTABISED DESI AD EIEERI STADARDS AD PROCEDURES for plastic piping systems. Suitability for the intended service application should be determined by the installer and/or user prior to installation of a plastic piping system. PRIOR TO ASSEBY, all piping system components should be inspected for damage or irregularities. ating components should be checked to assure that tolerances and engagements are compatible. Do not use any components that appear irregular or do not fit properly. Contact the appropriate manufacturer of the component product in question to determine usability. Consult all applicable codes and regulations for compliance prior to installation. Solvent Weld Connections Use quality solvent cements and primers formulated for the intended service application, pipe size and type of joint. While the pipe and fitting materials may be compatible with the intended medium, the solvent cement may not be. Consult the manufacturers for suitability of use. Read and follow the cement and primer manufacturers applications and cure time instructions thoroughly. Be sure to use the correct size applicator. Threaded Connections Use a quality grade thread sealant. WARI: SOE PIPE JOIT COPOUDS OR PTFE PASTES AY COTAI SUBSTACES TAT COUD CAUSE STRESS CRACKI TO PASTIC. Spears anufacturing Company recommends the use of Spears BUE 75 Thread Sealant which has been tested for compatibility with Spears products. Please follow the sealant manufacturers application / installation instructions. Choice of an appropriate thread sealant other than those listed above is at the discretion of the installer. 1 to 2 turns beyond FIER TIT is generally all that is required to make a sound plastic threaded connection. Unnecessary OVERTITEI will cause DAAE TO BOT PIPE AD FITTI. ead Free low lead certification unless otherwise specified, all Spears Schedule 40 fittings specified here-in are certified by SF International to ASI/SF Standard 61, Annex and is in compliance with California s ealth & Safety Code Section (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%. ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 52 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

5 Schedule 40 Product Overview AST STADARD DIESIOS SCEDUE 40 PIPE DIESIOS AST D 1785 I.D. O.D. SCEDUE 40 SOCKET DIESIOS AST D 2466 C B A AERICA ATIOA STADARD TAPER PIPE TREADS (PT) ASI B1.20.1,AST F 1498 P ominal Pipe Size In. WA TICKESS ean Outside Diameter In. O. D. Tolerance In. inimum Wall Thickness In. 1/8.405 ± /4.540 ± /8.675 ± /2.840 ± / ± ± / ± / ± ± / ± ± ± ± ± ± ± ± ominal Size In. Entrance A Diameter Bottom B Tolerance A Socket ength inimum C 1/ ± / ± / ± / ± / ± ± / ± / ± ± / ± ± ± ± ± ± ± ± ominal Size In. 30 Threads Per Inch Effective Thread ength Pitch Of Thread P 1/ / / / / / /4 11-1/ /2 11-1/ / / olded Schedule 40 products are manufactured to AST D 2466 for use with pipe manufactured to AST D Certain products carry reduced pressure handling capability and have maximum internal pressure ratings at 73 F noted. Fabricated Schedule 40 pressure fittings (part numbers ending with F ) are manufactured to Spears specifications for use with pipe manufactured to AST D See publication FAB-7, eneral Specifications for Standard Fabricated Fittings for additional information. All specified Schedule 40 products are manufactured from materials certified by SF for use in potable water service. Page 53 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

6 Injection olded Dimension References: = (AYI ET) intersection of center lines to bottom of socket/thread; 90 elbows, tees, crosses; ± 1/32 inch. = Intersection of center lines to face of fitting; 90 elbows tees, crosses; ± 1/32 inch. J = Intersection of center lines to bottom of socket/thread; 45 elbows; ± 1/32 inch Fabricated Dimension References: = (AYI ET) intersection of center lines to bottom of socket/thread; 90 elbows, tees, crosses; ± 1/4 inch; 14" & larger ± 1/2 inch. = Intersection of center lines to face of fitting; 90 elbows, tees, crosses; ± 1/4 inch.; wyes ± 1/2 inch; 14" & larger ± 1/2 inch. J = Intersection of center lines to bottom of socket/thread; 45 elbows; ± 1/4 inch; 14" & larger ± 1/2 inch. = Overall length of fittings; ± 1/16 inch. = Outside diameter of socket/thread hub; ± 1/16 inch. = Socket bottom to socket bottom; couplings; ± 1/16 inch. W = eight of cap; ± 1/16 inch. = Overall length of fittings; ± 1/2 inch.; wyes ± 1 inch; 14" & larger ± 1 inch. = Outside diameter of socket/thread hub; ± 1/4 inch. = Socket bottom to socket bottom; couplings; ± 1/2 inch. W = eight of cap; ± 1/4 inch. Typical Fabricated Dimension References J TEE Socket x Socket x Socket 1 1 Part umber Size 1 1 Approx. Wt. (bs.) /8 3/8 3/8 1-1/8 1-1/8 2-1/4 31/ /2 1/2 1/2 1-1/4 1-1/4 2-1/2 1-3/ /4 9/16 9/16 1-9/16 1-9/16 3-1/8 1-5/ /16 11/16 1-3/4 1-3/4 3-1/2 1-5/ /4 7/8 7/8 2-1/8 2-1/8 4-1/ /2 1-1/16 1-1/16 2-3/8 2-3/8 4-3/4 2-1/ /8 1-3/8 2-3/4 2-3/4 5-1/2 2-3/ /2 1-21/ / / / / / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 54 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

7 TEE Socket x Socket x Socket 1 1 Part umber Size 1 1 Approx. Wt. (bs.) / / / / / / /32 4-7/16 4-7/16 8-7/8 5-1/ / /8 3-5/8 6-21/ / /16 7-9/ /2 4-1/2 8-17/ / /16 9-3/ / / / / / / F /8 9-3/8 15-1/8 14-5/8 30-1/4 11-1/ / / / / / / F /4 10-3/ / / /32 7-1/ / / / / F / / /4 14-7/ F / / F /8 13-3/8 24-7/8 22-3/8 49-3/4 19-1/ F /4 15-1/2 28-1/4 25-1/2 56-1/2 21-3/ F /8 17-1/2 33-1/8 29-1/2 66-1/4 25-3/ REDUCI TEE Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) /8x3/8x1/2 17/32 21/32 17/32 2-1/32 1-3/4 2-1/32 4-1/16 7/8 1-3/32 7/ /2x1/2x3/4 9/16 9/16 9/16 1-5/16 1-9/16 1-5/16 2-5/8 1-1/16 1-9/32 1-1/ /2x1/2x1 25/32 17/32 25/ / / /32 3-1/16 1-1/16 1-5/8 1-1/ /4x1/2x1/2 17/32 21/32 17/ / /32 1-9/ /16 1-5/16 1-3/32 1-3/ /4x1/2x3/4 13/16 11/16 5/8 1-13/ /32 1-3/8 3-3/16 1-5/16 1-5/16 1-1/ /4x3/4x1/2 17/32 5/8 17/32 1-7/16 1-3/8 1-7/ /32 1-5/16 1-1/8 1-5/16.08 D /4x3/4x1/2 9/16 19/32 17/ / / /32 3-1/16 1-5/16 1-3/32 1-5/ /4x3/4x1 23/32 5/8 23/ / / /32 3-5/16 1-5/16 1-5/8 1-5/ x1/2x1 23/32 23/32 27/ / / /32 3-7/16 1-5/8 1-5/8 1-3/32.14 Page 55 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

8 REDUCI TEE Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) x3/4x1/2 5/8 23/32 19/ / /32 1-1/2 3-5/32 1-5/8 1-3/32 1-5/ x3/4x3/4 21/32 25/32 5/8 1-25/ /32 1-5/8 3-7/ /32 1-5/16 1-5/ x3/4x1 3/4 13/16 13/ / / /16 3-3/4 1-5/8 1-5/8 1-5/ x1x1/2 9/16 13/16 9/16 1-5/8 1-9/16 1-5/8 3-3/16 1-5/8 1-1/16 1-5/8.13 D x1x1/2 11/16 25/32 11/ /32 2-1/ / /32 1-5/8 1-1/8 1-5/ x1x3/4 19/32 3/4 19/32 1-5/8 1-21/32 1-5/8 3-9/32 1-5/8 1-5/16 1-5/ x1x1-1/4 31/32 27/32 31/32 2-3/32 2-3/32 2-3/32 4-3/16 1-5/8 1-31/32 1-5/ x1x1-1/2 1-1/8 13/16 1-1/8 2-1/4 2-3/32 2-1/4 4-15/32 1-5/8 2-1/4 1-5/ x1x2 1-7/16 27/32 1-7/16 2-1/2 2-1/4 2-1/ /8 2-3/4 1-5/ /4x1x1/2 11/ / /16 1-3/4 1-23/ / /8 1-5/ /4x1x3/4 25/32 1-1/16 25/32 2-1/ /32 3-7/ /32 1-5/ /4x1x1 31/32 1-1/16 7/8 2-5/32 2-3/ /32 4-1/ /16 1-5/ /4x1-1/4x1/2 17/32 29/32 17/ / / /32 3-9/ /32 1-3/ /32.18 D /4x1-1/4x1/2 23/32 31/32 23/ /32 2-3/ / / / /4x1-1/4x3/4 21/32 31/32 21/ / / / / / /4x1-1/4x1 13/ / / / / / /4x1-1/4x1-1/2 1-3/ / /32 2-5/ / / /32 2-7/ / /4x1-1/4x2 1-11/ / /32 2-3/8 2-19/32 5-3/ / /2x1-1/4x1/2 11/16 1-1/8 11/ /8 1-15/ /16 2-1/4 1-1/ /2x1-1/4x3/4 21/32 1-5/32 21/ /16 2-3/ /16 3-7/8 2-1/4 1-11/ /2x1-1/4x1 13/16 1-3/16 13/16 2-1/8 2-9/32 2-1/16 4-3/16 2-1/4 1-5/ /2x1-1/2x1/2 17/32 1-3/32 17/ / / / /16 2-7/32 1-1/8 2-7/32.22 D /2x1-1/2x1/2 17/32 1-1/16 17/ /32 2-5/ / /16 2-7/32 1-1/16 2-7/ /2x1-1/2x3/4 21/32 1-3/32 21/ /32 2-3/ / /32 2-7/32 1-5/16 2-7/ /2x1-1/2x1 25/32 27/32 25/32 2-3/ /32 2-3/32 4-3/16 2-7/32 1-5/8 2-7/ /2x1-1/2x1-1/ / /32 2-7/16 2-9/ /32 2-1/ / /2x1-1/2x2 1-5/16 1-3/16 1-5/16 2-5/8 2-9/16 2-5/8 5-7/32 2-1/4 2-3/4 2-1/ /2x1-1/2x2-1/2 1-21/32 1-3/ / / / / /16 2-1/4 3-11/32 2-1/ x1x2 1-1/4 1-1/4 1-7/ / / / /4 2-3/4 1-5/ x1-1/2x3/4 21/ /32 21/32 2-1/ / / /32 1-5/16 2-1/ x1-1/2x1 13/16 1-1/2 13/16 2-1/8 2-5/8 2-1/8 4-9/32 2-3/4 1-5/8 2-1/ x1-1/2x1-1/ /32 1-1/32 2-3/8 2-9/16 2-5/ / /32 2-7/32 2-7/ x2x1/2 17/ /32 17/ /32 2-3/ / / /32 1-3/ /32.30 D x2x1/2 9/16 1-7/32 9/ /16 2-1/2 1-15/16 3-7/8 2-23/32 1-1/ /32.31 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 56 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

9 REDUCI TEE Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) x2x3/4 21/32 1-1/2 21/32 2-1/32 2-1/16 2-1/32 4-1/16 2-3/4 1-11/32 2-3/ x2x1 13/16 1-3/8 13/16 2-3/16 2-1/2 2-3/16 4-3/8 2-23/32 1-5/8 2-23/ x2x1-1/ / /8 2-5/8 2-3/8 4-23/ / / / x2x1-1/2 1-1/16 1-5/16 1-1/16 2-3/8 2-9/16 2-3/8 4-3/4 2-23/32 2-1/4 2-23/ x2x3 2-7/8 1-13/16 2-7/8 4-1/4 3-13/16 4-1/4 8-1/ / x2x4 3-13/32 2-3/8 3-13/ /32 4-3/8 4-25/32 9-9/16 5-1/16 5-1/16 5-1/ /2x2-1/2x1/2 25/ /32 25/ /32 2-7/ /32 5-1/16 3-5/16 1-1/16 3-5/ /2x2-1/2x3/4 7/8 1-9/16 7/8 2-5/8 2-1/2 2-5/8 5-9/32 3-5/16 1-5/16 3-5/ /2x2-1/2x1 13/ /32 13/ / / /16 5-5/8 3-5/16 1-5/8 3-5/ /2x2-1/2x1-1/4 1-7/ /32 1-7/ / / / / /32 2-1/ / /2x2-1/2x1-1/2 1-3/16 1-5/8 1-3/ / / / / /32 2-1/4 3-11/ /2x2-1/2x2 1-13/ / /32 3-3/16 3-1/32 3-3/16 6-3/8 3-5/16 2-3/4 3-5/ /2x2-1/2x3 2-1/4 1-31/32 2-1/4 4-1/4 3-13/16 4-1/4 8-15/ /2x2-1/2x4 2-3/4 2-3/8 2-3/4 4-3/4 4-3/8 4-3/4 9-1/2 5-1/ / x3x1/2 11/ /16 11/16 2-9/ /32 2-9/16 5-1/ /32 1-3/ / x3x3/4 3/4 2 3/4 2-21/ /32 5-9/ / x3x1 29/ /32 29/ / / / / / / / x3x1-1/4 1-7/ /32 1-7/ /32 3-7/ / / x3x1-1/2 1-7/ /16 1-7/32 3-3/32 3-1/8 3-3/32 6-3/16 4-1/16 2-7/32 4-1/ x3x2 1-7/ /16 1-7/ /32 3-3/ / / / / / x3x2-1/2 1-3/4 1-31/32 1-3/4 3-5/8 3-11/16 3-5/8 7-1/4 4-3/ /32 4-3/ x3x4 2-1/2 2-1/16 2-1/2 4-1/2 4-1/16 4-1/ / / x3x6 5-1/ /2 7-1/ / /4 7-1/4 7-1/ x4x3/4 25/32 2-9/32 25/ /16 3-9/ /16 5-5/8 5-3/32 1-5/16 5-3/ x4x1 13/16 2-9/16 13/ /16 3-5/8 2-13/ /32 5-1/ /32 5-1/ x4x1-1/4 1-1/16 2-9/32 1-1/16 3-3/ /32 3-3/32 6-3/ / x4x1-1/2 1-3/ /32 1-3/16 3-3/ /32 3-3/ /32 5-1/16 2-1/4 5-1/ x4x2 1-13/32 2-3/4 1-13/32 3-7/16 4-5/32 3-7/16 6-7/8 5-1/32 2-3/4 5-1/ x4x2-1/2 1-31/32 3-3/32 2-1/32 4-3/ /32 4-3/32 8-5/32 5-5/32 4-1/16 5-5/ x4x3 2-1/32 2-5/8 2-1/32 4-3/32 4-1/2 4-3/32 8-5/32 5-5/32 4-1/16 5-5/ x4x6 5-1/2 3-1/2 5-1/2 7-1/ / /16 6-7/8 7-1/2 6-7/ x4x8 6-3/4 4-1/2 6-3/4 8-3/4 8-1/2 8-3/4 17-1/2 9-1/4 9-5/8 9-5/ x5x2 1-11/32 3-1/ / / / / /32 6-1/8 2-23/32 6-1/ x5x2-1/ / /32 5-3/8 5-1/ /16 6-5/32 4-1/32 6-5/ x5x / /32 5-1/16 5-1/ /16 6-5/32 4-1/32 6-5/ x5x4 2-1/2 3-5/32 2-1/2 5-9/16 5-3/16 5-9/ /8 6-5/32 5-1/32 6-5/ x6x1-1/4 1-3/8 4-1/16 1-3/8 4-27/32 5-5/ / /16 7-1/4 2-3/4 7-1/ Outlet sized with bushing Page 57 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

10 REDUCI TEE Socket x Socket x Socket 1 $ $ 2 2 Approx. Part umber Size Wt. (bs.) x6x1-1/2 1-3/8 3-7/8 1-3/8 4-27/32 5-3/ / /16 7-1/4 2-11/16 7-1/ x6x2 1-13/32 3-5/8 1-13/ / / / /32 7-1/4 2-3/4 7-1/ x6x2-1/2 1-31/32 4-1/8 1-31/ /32 5-7/8 4-31/ /16 7-1/4 4-1/32 7-1/ x6x3 1-31/32 3-5/8 1-31/ /32 5-1/2 4-31/ / / x6x4 2-17/32 3-5/8 2-17/32 5-9/16 5-5/8 5-9/ /8 7-1/ / x6x5 3-1/2 4-1/2 3-1/ / /16 7-3/16 7-3/ x6x8 5-3/8 5-1/2 5-3/8 8-7/8 9-1/2 8-7/8 17-3/4 9-1/2 9-3/4 9-1/ x6x / / / /8 22-3/4 11-1/2 11-9/ / x8x / / / x8x2-1/ / / / / x8x3 1-31/32 4-3/4 1-31/32 6-1/32 6-3/4 6-1/ / / / x8x4 2-17/ / / / / / /16 9-9/ /32 9-9/ x8x5 3-21/32 5-1/4 3-21/ /32 8-1/4 7-21/ /16 9-5/16 7-1/4 9-5/ x8x6 3-5/8 4-3/4 3-5/8 7-21/ / / / /32 7-1/4 9-11/ x8x / / / / /2 11-7/ / / / / F 10x10x2 4-7/8 7-1/4 4-7/8 10-1/ /8 20-1/4 11-1/2 2-11/ / F 10x10x2-1/2 5-5/8 7-3/4 5-5/8 10-7/8 9-3/4 10-7/8 21-3/4 11-1/2 3-1/4 11-1/ x10x3 3-13/ /16 9-3/ /8 18-3/ / x10x4 3-27/32 7-3/8 3-27/ /32 9-3/8 9-11/ / / F 10x10x6 6-7/8 8-3/8 6-7/8 12-1/8 11-5/8 12-1/8 24-1/4 11-1/2 7-3/ / x10x8 5-3/4 7-3/16 5-3/4 10-7/8 11-1/4 10-7/ / / / / F 12x12x2 5-1/4 8-1/4 5-1/4 11-1/ / / / / F 12x12x2-1/2 5-3/4 8-3/4 5-3/ / /16 3-1/4 13-9/ F 12x12x3 5-3/ / / / / / F 12x12x / /4 11-9/ /4 26-1/2 13-9/ / x12x6 4-7/8 8-5/16 4-7/8 11-7/ /4 11-7/ / /4 9-3/4 14-1/ x12x8 4-27/32 7-1/8 4-27/ / / / / /4 9-3/4 14-1/ x12x /16 7-3/8 6-13/ / / / /8 13-3/4 13-3/4 13-3/ F 12x12x /4 10-3/8 10-1/4 16-1/2 15-5/8 16-1/ / /2 13-9/ F 12x12x /2 12-3/4 18-1/2 30-1/4 20-3/4 30-1/4 60-1/2 14-1/ / F 12x12x / /8 23-1/ /8 47-3/4 19-1/8 19-1/8 19-1/ F 14x14x2 5-7/8 8-13/16 5-7/8 12-7/8 10-9/ /8 25-3/4 14-7/8 2-11/ / F 14x14x3 6-1/2 9-9/16 6-1/2 13-1/ / / /8 3-15/ / F 14x14x4 7-3/8 9-7/8 7-3/8 14-3/8 12-1/8 14-3/8 28-3/4 14-7/ / F 14x14x6 7-7/8 9-15/16 7-7/8 14-7/8 13-3/ /8 29-3/4 14-7/8 7-3/ / F 14x14x8 8-7/8 9-7/8 8-7/8 15-7/8 14-1/8 15-7/8 31-3/4 14-7/8 9-1/4 14-7/ Outlet sized with bushing $ $ $ $ $ $ $ $ $ $ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 58 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

11 REDUCI TEE Socket x Socket x Socket Part umber Size F 14x14x / / /8 17-3/8 16-3/ /8 34-3/4 14-7/8 11-1/2 14-7/ x14x12 7-1/ /32 7-1/ / / / / / / / Approx. Wt. (bs.) F 14x14x /8 10-3/4 11-3/8 18-3/ /8 36-3/4 14-7/8 13-9/ / F 16x16x2 6-3/8 9-3/4 6-3/8 14-3/8 11-1/2 14-3/8 28-3/ / F 16x16x3 6-1/2 10-1/2 6-1/2 14-1/2 12-3/4 14-1/ / F 16x16x / / F 16x16x / / / F 16x16x / / / F 16x16x / / / F 16x16x / / / F 16x16x / / / F 18x18x2 6-1/ /16 6-1/4 15-1/4 12-7/ /4 30-1/2 19-1/8 2-11/ / F 18x18x3 7-1/4 11-7/16 7-1/4 16-1/ / /4 32-1/2 19-1/8 3-15/ / F 18x18x4 7-3/4 11-3/4 7-3/4 16-3/ /4 33-1/2 19-1/ / F 18x18x6 8-3/ /16 8-3/4 17-3/4 15-1/ /4 35-1/2 19-1/8 7-3/ / F 18x18x8 9-3/4 11-3/4 9-3/4 18-3/ /4 37-1/2 19-1/8 9-1/4 19-1/ F 18x18x / / /4 19-3/4 18-1/ /4 39-1/2 19-1/8 11-1/2 19-1/ F 18x18x /4 12-5/8 11-3/4 20-3/4 18-7/8 20-3/4 41-1/2 19-1/8 13-9/ / F 18x18x /8 12-7/8 12-7/8 21-7/8 19-7/8 21-7/8 43-3/4 19-1/8 14-7/8 19-1/ F 18x18x / / /8 22-7/ / /8 45-3/4 19-1/ / F 20x20x2 6-3/4 12-7/16 6-3/4 16-3/4 14-3/ /4 33-1/2 21-3/ / / F 20x20x3 7-1/4 12-7/16 7-1/4 17-1/ / /4 34-1/2 21-3/ / / F 20x20x4 8-1/4 12-3/4 8-1/4 18-1/ /4 36-1/2 21-3/ / F 20x20x6 9-1/ /16 9-1/4 19-1/4 16-1/ /4 38-1/2 21-3/16 7-3/ / F 20x20x8 10-1/4 12-3/4 10-1/4 20-1/ /4 40-1/2 21-3/16 9-1/4 21-3/ F 20x20x / / /4 21-1/4 19-1/ /4 42-1/2 21-3/ /2 21-3/ F 20x20x /4 13-5/8 12-1/4 22-1/4 19-7/8 22-1/4 44-1/2 21-3/ / / F 20x20x /4 13-7/8 13-1/4 23-1/4 20-7/8 23-1/4 46-1/2 21-3/ /8 21-3/ F 20x20x / / /4 24-1/ / /4 48-1/2 21-3/ / F 20x20x /4 14-3/8 15-1/4 25-1/4 23-3/8 25-1/4 50-1/2 21-3/ /8 21-3/ F 24x24x2 8-1/8 14-5/16 8-1/8 20-1/8 16-1/ /8 40-1/4 25-3/8 2-11/ / F 24x24x3 8-5/8 14-5/16 8-5/8 20-5/8 16-9/ /8 41-1/4 25-3/8 3-15/ / F 24x24x4 9-1/8 14-5/8 9-1/8 21-1/8 16-7/8 21-1/8 42-1/4 25-3/ / F 24x24x6 10-1/ / /8 22-1/ / /8 44-1/4 25-3/8 7-3/ / F 24x24x8 11-1/8 14-5/8 11-1/8 23-1/8 18-7/8 23-1/8 46-1/4 25-3/8 9-1/4 25-3/ F 24x24x / / /8 24-1/ / /8 48-1/4 25-3/8 11-1/2 25-3/ F 24x24x /8 15-1/2 13-1/8 25-1/8 21-3/4 25-1/8 50-1/4 25-3/8 13-9/ / Page 59 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

12 REDUCI TEE Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) F 24x24x /4 15-3/4 13-3/4 25-3/4 22-3/4 25-3/4 51-1/2 25-3/8 14-7/8 25-3/ F 24x24x / / /4 26-3/ / /4 53-1/2 25-3/ / F 24x24x /4 16-1/4 15-3/4 27-3/4 25-1/4 27-3/4 55-1/2 25-3/8 19-1/8 25-3/ F 24x24x /4 17-3/8 16-3/4 28-3/4 27-3/8 28-3/4 57-1/2 25-3/8 21-3/ / REDUCI SORT SOCKET TEE Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) S x2x1 11/16 2-7/32 11/16 2-3/32 1-1/4 1-11/32 3-7/ /32 1-5/8 2-23/32.28 S x2x1-1/ /4 31/32 2-3/8 2-3/8 1-5/ /32 2-7/ /32.34 TRASITIO TEE Socket x Socket x Insert 1 P 1 Part umber Size 1 1 P Approx. Wt. (bs.) /4 13/32 3/4 1-13/32 2-1/4 2-13/16 1-5/16 1-1/ x1x1/2 3/16 13/16 1-7/16 2-5/16 2-7/8 1-19/32 1-1/ x2x3/4 1/2 1-7/ / / / /32 1-1/ x2x1-1/4 11/ /32 2-1/ /32 4-1/8 2-3/4 1-1/2.34 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 60 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

13 STREET TEE Spigot x Socket x Socket 1 PIPE O.D Part umber Size Approx. Wt. (bs.) /2 23/32 23/32 1/2 1-19/ / /32 3-5/32 1-3/16 1-3/ /4 13/16 27/32 7/8 1-13/16 1-7/8 1-13/16 3-5/8 1-13/ / / /32 2-1/ /8 4-7/32 1-3/4 1-3/ /4 1-1/4 1-5/32 1-1/8 2-7/16 2-5/16 2-7/ /32 2-3/32 2-3/ /2 1-13/16 1-1/8 1-1/8 2-7/8 2-9/16 2-9/16 5-3/8 2-11/ / / / /32 3-3/32 3-3/16 3-3/32 6-5/32 2-7/8 2-7/8.78 TEE Socket x Socket x Fipt 1 1 Part umber Size 1 1 Approx. Wt. (bs.) /8 7/16 1/2 1-11/16 1-1/16 3-3/8 29/ /2 1/2 1/2 1-1/4 1-7/32 2-1/2 1-3/ /4 21/32 23/ /32 1-7/16 3-9/32 1-5/ /16 7/8 1-15/16 1-7/8 3-7/8 1-5/ /4 29/32 1-1/8 2-5/32 2-1/16 4-5/ /2 1-1/32 1-1/8 2-11/32 2-1/ /16 2-1/ / /32 2-5/8 2-13/32 5-7/32 2-3/ /2 1-1/2 1-11/16 3-1/4 2-31/32 6-1/2 3-3/ /16 2-1/ /16 3-3/8 7-11/ / / / / /32 5-1/ Page 61 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

14 REDUCI TEE Socket x Socket x Fipt Part umber 2 2 Size Approx. Wt. (bs.) /2x1/2x1/8 9/32 17/32 9/32 1-1/ /32 2-1/16 1-3/32 9/16 1-3/ /2x1/2x1/4 3/8 9/16 3/8 1-1/8 1-1/8 1-1/8 2-1/4 1-1/16 13/16 1-1/ /2x1/2x3/4 21/32 1/2 21/ /32 1-5/ / /16 1-1/ /32 1-3/ /4x1/2x1/2 1/2 11/16 9/16 1-1/2 1-7/16 1-5/ /16 1-9/32 1-1/16 1-3/ /4x1/2x3/4 13/16 21/32 5/8 1-13/16 1-7/16 1-3/8 3-3/16 1-5/16 1-5/16 1-3/ /4x3/4x1/8 9/32 5/8 9/32 1-7/32 1-3/32 1-7/32 2-7/16 1-5/16 9/16 1-5/ /4x3/4x1/2 17/32 11/16 17/ / / /32 3-1/16 1-5/16 1-1/8 1-5/ x3/4x1/2 17/32 13/16 17/ /32 1-9/ /32 3-3/16 1-5/8 1-1/16 1-5/ x3/4x3/4 9/16 23/32 11/ / / /16 3-3/8 1-19/32 1-9/32 1-9/ x1x1/2 1/2 7/8 1/2 1-5/8 1-1/2 1-5/8 3-1/4 1-5/8 1-1/8 1-5/ x1x3/4 21/32 13/16 21/ / / /32 3-9/16 1-5/8 1-5/16 1-5/ /4x1x1/2 19/32 1-9/32 19/ / /32 1-3/4 3-17/ /8 1-5/ /4x1x3/4 13/16 1-1/32 3/4 1-13/ /32 1-3/4 3-9/ /16 1-5/ /4x1x1 13/16 1-5/32 13/16 2-1/16 2-1/8 1-15/ / /32 1-5/ /4x1-1/4x1/2 23/32 15/16 23/ / / / / /32 1-3/ / /4x1-1/4x3/4 13/16 1-1/16 13/16 2-1/16 1-3/4 2-1/16 4-1/ / /4x1-1/4x1 21/32 1-1/32 21/32 1-7/8 1-27/32 1-7/8 3-25/ /32 1-5/8 1-31/ /2x1-1/4x1/2 19/32 1-9/32 19/ / /32 27/ /32 2-1/4 1-1/ /2x1-1/4x3/4 11/16 1-5/32 5/8 1-31/32 2-5/ /32 3-7/8 2-1/4 1-5/ /2x1-1/4x1 13/16 1-1/8 3/4 2-1/8 2-1/4 2-1/16 4-3/16 2-1/4 1-5/ /2x1-1/2x1/2 7/16 1-3/32 7/16 1-3/4 1-13/16 1-3/4 3-1/2 2-7/32 1-3/32 2-7/ /2x1-1/2x3/4 21/32 1-3/32 21/ / / / /32 2-1/4 1-5/16 2-1/ /2x1-1/2x1 25/32 1-1/16 25/32 2-3/ /16 2-3/32 4-3/16 2-1/4 1-5/8 2-1/ /2x1-1/2x1-1/ / /32 2-1/32 2-9/ /32 2-1/ / x1-1/2x3/4 11/ /32 5/8 2-1/ / / /4 1-5/16 2-1/ x1-1/2x1 13/ /32 3/4 2-3/ /32 2-1/8 4-5/16 2-3/4 1-5/8 2-1/ x2x1/2 21/32 1-3/8 21/32 2-1/32 2-1/8 2-1/32 4-1/16 2-3/4 1-1/8 2-3/ x2x3/4 21/ /32 21/32 2-1/32 2-3/32 2-1/32 4-1/32 2-3/4 1-11/32 2-3/ x2x1 13/ /32 13/16 2-3/16 2-1/4 2-3/16 4-3/8 2-23/32 1-5/8 2-23/ x2x1-1/ / /8 2-5/16 2-3/8 4-3/4 2-23/ / / x2x1-1/2 1-1/16 1-1/4 1-1/16 2-5/16 2-3/16 2-5/ /32 2-3/4 2-1/4 2-3/ /2x2-1/2x1/2 1/2 1-11/16 1/2 2-1/4 2-3/8 2-1/4 4-1/2 3-3/8 1-3/16 3-3/ /2x2-1/2x3/4 13/ /16 13/16 2-9/16 2-7/16 2-9/16 5-1/8 3-3/8 1-3/8 3-3/ /2x2-1/2x / /4 2-5/8 2-3/4 5-1/2 3-11/ / / /2x2-1/2x1-1/4 1-1/ /32 1-1/ / / /32 5-9/ /32 2-1/ / /2x2-1/2x1-1/2 1-1/ /32 1-1/ /16 2-3/4 2-13/16 5-5/8 3-3/8 2-13/32 3-3/ /2X2-1/2X2 1-1/2 1-27/32 1-1/2 3-1/4 2-27/32 3-1/4 6-17/ / / x3x1/2 19/32 2-1/16 19/ / / / / /32 1-3/ /32.77 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 62 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

15 REDUCI TEE Socket x Socket x Fipt Part umber 2 2 Size Approx. Wt. (bs.) x3x3/4 13/16 2-1/32 13/ / / / / / x3x1 31/32 2-1/8 31/32 2-7/ /8 5-23/32 4-1/ /16 4-1/ x3x1-1/ / /32 3-1/ / / x3x1-1/2 1-7/32 2-1/8 1-7/32 3-3/32 3-1/16 3-3/32 6-3/ / x3x2 1-1/2 2-1/8 1-1/2 3-13/32 3-1/8 3-13/ / x4x1 27/32 2-5/8 27/32 2-7/8 3-1/2 2-7/8 5-3/4 5-1/ /16 5-1/ x4x1-1/2 1-1/8 2-1/2 1-1/8 3-1/8 3-1/2 3-1/8 6-1/ / x4x2 1-3/8 2-3/4 1-3/8 3-13/32 3-3/4 3-13/ /32 5-1/ / x4x / / /32 4-1/32 8-1/16 5-1/16 4-9/32 5-1/ x5x4 2-1/2 3-1/8 2-1/2 5-17/ / / /16 6-3/32 5-1/32 6-3/ x6x1 1-3/8 4-11/32 1-3/8 4-27/ / / /16 7-7/ /32 7-7/ x6x2 1-3/8 3-19/32 1-3/8 4-27/ / / /32 7-1/4 2-25/32 7-1/ x6x / /32 5-7/ / /16 7-1/4 4-1/32 7-1/ x6x4 2-1/2 3-5/8 2-1/ / /32 5-1/16 7-7/ x8x / / / /16 9-5/ x8x3 2-9/ / /32 6-9/16 7-5/16 6-9/ /8 9-5/ / x8x4 2-1/2 4-15/16 2-1/2 6-31/ / / /16 9-5/ / F 10x10x2 5-1/4 6-11/16 5-1/4 10-1/2 7-3/4 10-1/ / / / F 10x10x2-1/2 5-1/2 8-1/2 5-1/2 10-3/4 10-1/4 10-3/4 21-1/2 11-9/16 3-5/ / F 10x10x4 6-3/ /8 11-5/8 8-3/4 11-5/8 23-1/4 11-1/2 5-1/ / F 12x12x2 5-3/4 7-13/16 5-3/ / /8 2-13/ / F 12x12x3 6-1/ /4 12-1/2 10-5/8 12-1/ / / F 12x12x4 6-7/8 8-1/4 6-7/8 13-1/ /8 26-1/4 13-9/16 5-1/ / Outlet sized with bushing TEE Socket x Socket x ipt 1 1 Part umber Size 1 1 Approx Wt. (bs.) 402B /8 1-1/16 1-3/ /16 1-5/8.15 Page 63 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

16 SPECIA REIFORCED TEE Socket x Socket x SR Fipt Part umber Size Approx Wt. (bs.) SR 1/2 19/32 15/ / / /16 1-5/32 13/ SR 1-1/4 29/32 1-1/8 2-5/32 2-1/16 4-5/ /32 2-1/16.31 SPECIA REIFORCED REDUCI TEE Socket x Socket x SR Fipt Part umber Size Approx Wt. (bs.) SR 1/2x1/2x1/4 15/32 11/16 1-5/16 1-7/32 2-5/8 1-5/32 13/ SR 3/4x3/4x1/4 7/16 13/16 1-7/ /32 2-7/8 1-3/8 13/ SR 3/4x3/4x1/2 25/32 1/2 1-5/8 1-7/16 3-1/4 1-3/8 1-3/ SR 1-1/4x1-1/4x1/2 7/16 1-1/8 1-11/16 1-7/8 3-3/8 2-3/32 1-3/ SR 1-1/4x1-1/4x1 27/32 1-1/32 2-3/ /32 4-7/32 2-3/ / SR 1-1/2x1-1/2x1-1/4 1-1/32 1-5/32 2-7/16 2-3/ /32 2-3/8 2-1/ SR 2-1/2x2-1/2x1/2 1/2 1-11/16 2-1/4 2-3/8 4-1/2 3-3/8 1-3/ SR 2-1/2x2-1/2x3/4 13/ /32 2-9/16 2-7/16 5-1/8 3-3/8 1-3/ SR 2-1/2x2-1/2x /32 2-3/4 2-5/8 5-1/2 3-11/ / SR 2-1/2x2-1/2x1-1/4 1-1/ / / /32 5-9/ /32 2-1/ SR 2-1/2x2-1/2x1-1/2 1-1/ / /16 2-3/4 5-5/8 3-3/8 2-7/ SR 2-1/2x2-1/2x2 1-1/2 1-27/32 3-1/4 2-27/ / / SR 3x3x1/2 19/32 2-1/ / / / /32 1-3/ SR 3x3x3/4 13/16 2-1/ / / / / SR 3x3x1 31/32 2-1/8 2-7/ /32 4-1/ / SR 3x3x1-1/4 1-1/32 2-3/ /32 3-3/ / / SR 3x3x1-1/2 1-7/32 2-1/8 3-3/32 3-3/32 6-9/ /32 2-7/ SR 3x3x2 1-1/2 2-1/ /32 3-1/16 6-7/ SR 4x4x1 27/32 2-5/8 27/ /32 5-3/4 5-1/ / SR 4x4x1-1/2 1-1/8 2-25/32 3-1/8 3-3/4 6-9/32 5-1/32 2-7/ SR 4x4x2 1-3/8 2-25/ / / /32 5-1/32 3-1/ SR 4x4x /2 4-1/ /16 8-1/16 5-1/16 4-9/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 64 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

17 REDUCI TEE Socket x Fipt x Socket Part umber Size Approx. Wt. (bs.) /4x1/2x3/4 11/16 11/16 11/ / /16 1-3/8 3-3/ / /32 1-3/16.15 SPECIA REIFORCED REDUCI TEE Socket x SR Fipt x Socket Part umber Size Approx. Wt. (bs.) SR 3/4x1/2x3/4 11/16 11/16 11/ / / /32 3-1/8 1-13/ /32 1-7/32.16 TEE Fipt x Fipt x Fipt Part umber Size Approx. Wt. (bs.) /2 17/32 1-1/4 2-1/2 1-3/ /4 19/32 1-3/8 2-3/4 1-9/ / /32 3-3/ / /4 15/ /16 3-7/8 2-7/ / /32 2-7/ /4 2-5/ / / /2 2-13/ / /16 4-1/ Outlet sized with bushing Page 65 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

18 VETURIED TEE 1" Socket x 3/4" Socket (1" Spigot) x 3/4" Socket (1" Spigot) Part umber Size Approx. Wt. (bs.) x3/4x3/4 19/32 27/32 3/4 1-1/2 1-11/ /32 1-5/8 1-5/16 1-5/16.15 AIFOD TEE Spigot x Socket x ipt PIPE O.D. 2 2 Part umber Size Approx. Wt. (bs.) / / /16 2-5/8 2-5/32 2-5/8 5-1/4 1-21/ AIFOD TEE Spigot x Socket x Fipt 1 PIPE O.D Part umber Size Approx. Wt. (bs.) /32 1-1/4 1-11/16 2-5/8 2-5/32 2-5/8 5-1/4 1-21/ / O-RI SEAED AIFOD TEE O-ring Sealed ipt x Fipt x ipt Part umber Size Approx. Wt. (bs.) 451A /32 31/32 3/4 3-13/ / /16 5-1/2 1-21/32.19 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 66 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

19 90 EBOW Socket x Socket Part umber Size Approx. Wt. (bs.) /8 3/8 1-1/8 7/ /2 1/2 1-1/4 1-1/ /4 9/16 1-1/2 1-11/ / /16 1-5/ /4 31/32 2-5/ /2 1-1/ /32 2-1/ / /16 2-3/ /2 1-1/2 3-1/4 3-11/ / / / /32 5-1/ F 4-1/2 8-5/8 6-1/8 5-7/ /16 6-1/8 6-5/ /32 6-9/16 7-9/ /32 8-7/16 9-3/ / / / F /2 14-3/4 11-1/ / / / F /2 16-3/4 13-9/ /2 14-1/ / F /4 19-1/4 14-7/ F /8 22-1/ F /4 26-1/4 19-1/ F /4 28-3/4 21-3/ F /4 34-1/4 25-3/ Page 67 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

20 REDUCI 90 EBOW Socket x Socket Part umber Size Approx. Wt. (bs.) /8x1/2 7/16 15/ / /16 1-1/8 29/ /4x1/2 1/2 19/32 1-1/2 1-11/32 1-5/16 1-3/32.06 D /4x1/2 1/2 11/16 1-1/2 1-15/16 1-5/16 1-1/ x1/2 9/16 1-1/ / /16 1-5/8 1-1/8.08 D x1/2 9/16 19/ / /32 1-5/8 1-3/ x3/4 21/32 23/ / / /32 1-5/ /4x1/2 9/ /16 1-3/ /32.11 D /4x1/2 9/ /32 2-1/ / /4x3/4 23/ / / / /4x1 11/16 7/8 1-15/ / /2x1/2 17/32 1-1/8 1-27/32 1-7/8 2-7/32 1-3/ /2x1 13/16 1-3/32 2-1/8 2-5/32 2-1/4 1-5/ /2x1-1/4 31/32 1-3/32 2-9/ /32 2-7/ / x1 27/ /32 2-7/ / / / x1-1/ /8 2-3/8 2-19/32 2-3/ x1-1/2 1-1/8 1-5/ /32 2-9/16 2-3/4 2-1/ x1-1/2(2) 1-1/ /32 2-7/ /16 2-3/4 2-3/ /2x2 1-1/4 1-1/ /8 3-11/ / /2x2(2-1/2) 1-1/4 2-9/ /16 3-5/16 2-7/ SWEEP EBOW Socket x Socket Part umber Size Approx. Wt. (bs.) S 1/2 27/ /32 1-3/ S 3/4 1-1/32 2-1/ / S 1 1-5/16 2-7/ / S 1-1/4 1-9/ /16 2-3/ S 1-1/2 1-3/4 3-5/ / S 2 2-5/ /16 2-7/ S 2-1/2 3-3/ / / S 3 3-1/ / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 68 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

21 O SWEEP EBOW Socket x Socket Part umber Size Approx. Wt. (bs.) SF 2-1/2 5-7/16 7-7/16 3-1/ SF 3 6-3/8 8-5/8 3-15/ SF 4 8-3/8 10-5/ SF /4 7-3/ SF / /16 9-1/ EBOW Socket x Fipt 1 1 Part umber Size 1 1 Approx. Wt. (bs.) /2 1/2 1/2 1-1/4 1-1/4 1-3/ /4 9/16 9/16 1-9/16 1-9/32 1-5/ /16 21/ /16 1-9/16 1-5/ /4 7/8 1-5/32 2-1/8 2-1/32 2-1/ / /16 2-5/ / /16 1-9/ / / / /2 1-1/2 1-1/2 3-1/2 3-1/16 3-5/ / / / / / /32 4-5/ /16 5-1/ SPECIA REIFORCED 90 EBOW Socket x SR Fipt Part umber Size Approx. Wt. (bs.) SR 1/2 1/2 9/16 1-1/4 1-9/32 1-3/32 1-7/ SR 3/4 9/16 21/ / /32 1-3/8 1-13/ SR 1 19/32 13/ / / / / SR 1-1/4 7/8 1-5/32 2-1/8 2-1/32 2-1/16 2-1/16.28 Page 69 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

22 REDUCI 90 EBOW Socket x Fipt Part umber Size Approx. Wt. (bs.) /8x1/2 17/32 17/32 1-9/32 1-9/32 7/8 1-3/ /2x3/4 21/32 9/ / /32 1-5/16 1-3/ /4x1/2 9/16 5/8 1-1/2 1-3/8 1-5/16 1-3/ x1/2 7/16 11/16 1-9/16 1-7/16 1-5/8 1-3/ x3/4 11/16 7/8 1-13/16 1-5/8 1-5/8 1-5/ /4x /32 2-1/ / /2x1 13/16 1-1/8 2-3/ /4 1-11/ /2x1-1/4 15/16 1-1/4 2-1/4 2-7/32 2-3/ / x1 13/16 1-9/16 2-5/16 2-3/8 2-3/4 1-11/ x1-1/ /4 2-3/8 2-7/32 2-3/ x1-1/2 1-1/8 1-9/16 2-1/2 2-1/2 2-23/ /32.42 SPECIA REIFORCED REDUCI 90 EBOW Socket x SR Fipt Part umber Size Approx. Wt. (bs.) SR 1-1/2x1 13/16 1-1/8 2-3/ / / SR 2x1 1-3/16 1-9/16 2-5/16 2-3/8 2-3/4 1-1/ SR 2x1-1/2 1-1/8 1-19/32 2-1/2 2-17/ /32 2-7/16.45 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 70 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

23 90 EBOW Fipt x Fipt Part umber Size Approx. Wt. (bs.) /2 1/2 1-7/32 1-3/ /4 1/2 1-1/4 1-5/ /8 1-17/32 1-5/ / / / / / /32 2-3/ STREET EBOW Spigot x Socket PIPE O.D. Part umber Size Approx. Wt. (bs.) /2 3/4 15/32 15/32 1-1/4 1-3/ /4 27/32 17/ / / / /32 2-1/8 1-13/16 1-5/ /4 1-3/16 13/ /32 2-1/ / /2 1-11/32 1-1/16 2-5/8 2-3/8 2-1/ /32 1-1/ /8 2-23/ /2 1-15/ / /32 3-3/8 3-11/ / /16 4-5/ / /32 2-5/ / /32 5-1/ / / / /16 3-9/16 8-5/16 6-9/16 7-1/ /8 4-15/ /16 8-1/2 9-5/ F 8 7-1/2 7-1/2 11-3/4 11-3/4 9-1/ F /4 5-3/4 13-1/2 13-3/4 11-1/ F /4 12-1/4 19-1/4 19-1/4 14-7/ F /8 14-1/8 27-5/8 22-1/ F /4 17-1/4 31-3/4 26-1/4 19-1/ F /4 18-3/4 34-3/4 28-3/4 21-3/ Page 71 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

24 90 STREET EBOW ipt x Socket Part umber Size Approx. Wt. (bs.) /2 21/32 3/8 1-11/32 1-5/32 1-3/ /4 27/32 15/ / /32 1-5/ /32 11/ / /16 1-5/ /4 1-3/16 3/4 2-3/ /2 1-13/ /32 2-5/16 2-7/ /8 1-11/32 2-9/ / / / / / / REDUCI 90 STREET EBOW ipt x Socket Part umber Size Approx. Wt. (bs.) /4x1/2 23/32 13/32 1-7/16 1-1/4 1-3/ /4x1 3/4 1/2 1-3/4 1-11/32 1-5/ /4 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) F 1/2 1-5/16 5/16 1-1/ F 3/4 1-5/16 5/16 1-1/ F 1 1-9/16 5/16 1-9/ F 1-1/4 2 1/2 1-5/ /2 1-19/32 7/32 2-3/8.24 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 72 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

25 11-1/4 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) F 1-1/2 2 1/2 2-3/ /4 1/4 2-13/ F 2-1/2 2-11/16 11/16 3-1/ /8 5/16 4-1/ /32 13/32 5-1/ F 4-1/2 3-1/4 3/4 5-7/ F /16 13/16 6-1/ F 6 4-1/ / F 8 5-5/16 1-1/16 9-1/ F / / / F / / / F /4 1-3/4 14-7/ F /4 2-1/ F /8 19-1/ F /8 3-3/8 21-3/ F /8 4-1/8 25-1/ STREET EBOW ipt x Fipt Part umber Approx. Wt. (bs.) Size PVC PVC /2 23/32 11/ /32 1-1/16 1-1/ /4 13/16 7/ /32 1-3/ / /16 9/ /32 1-7/16 1-5/ /4 1-7/32 7/8 2-7/32 1-7/8 1-31/ /2 1-5/ /32 2-1/32 2-7/ /32 1-1/4 2-3/4 2-5/ / /32 1-7/8 4-15/ / Page 73 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

26 90 STREET EBOW ipt x Fipt Part umber Approx. Wt. (bs.) Size DPE DPE /2 23/32 11/ /32 1-1/16 1-1/ /4 13/16 7/ /32 1-3/ / /16 9/ /32 1-7/16 1-5/ /4 1-7/32 7/8 2-7/32 1-7/8 1-31/ /2 1-11/32 1-1/ /32 2-1/8 2-13/ STREET EBOW (Short Pattern) ipt x Fipt Part umber - DPE Size Approx. Wt. (bs.) S /2 21/32 5/16 1-3/16 31/32 1-1/16.02 S /4 3/4 7/16 1-5/16 1-3/32 1-9/32.03 S /8 9/16 1-9/16 1-3/8 1-9/16.06 S /4x1/2 21/32 1/2 1-7/32 1-1/ SIDE OUTET EBOW Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) /2 1/2 1-1/4 1-3/ /4 9/16 1-9/16 1-5/ /16 1-7/8 1-5/ /2 1-1/ /32 2-1/ /16 2-5/8 2-3/4.47 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 74 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

27 SIDE OUTET EBOW Socket x Socket x Fipt Part umber Size Approx. Wt. (bs.) /2 1/2 1/2 1-1/4 1-1/4 1-3/32 1-3/ /4 9/16 5/8 1-9/16 1-7/16 1-9/32 1-9/ /4x3/4x1/2 9/16 21/32 1-9/ /32 1-5/16 1-1/ x1x1/2 11/16 13/ /16 1-9/16 1-5/8 1-1/ EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) F 1/2 1-3/8 3/8 1-1/ F 3/4 1-7/16 7/16 1-1/ F 1 1-3/4 1/2 1-9/ F 1-1/4 2-1/8 5/8 1-15/ F 1-1/2 2-3/16 11/16 2-3/ F 2 2-1/2 3/4 2-11/ F 2-1/2 2-15/16 15/16 3-1/ F 3 3-5/16 1-1/ / F 4 3-7/16 1-3/ F 4-1/2 3-3/4 1-1/4 5-7/ F 5 4-5/16 1-5/16 6-1/ F 6 4-7/8 1-5/8 7-3/ F 8 6-1/8 1-7/8 9-1/ F / / F /16 2-9/ / F /4 2-3/4 14-7/ F /8 3-7/ F /2 4-1/2 19-1/ F /4 5-1/4 21-1/ F / Page 75 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

28 22-1/2 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) /2 1-1/16 3/16 1-5/ /4 1-3/16 3/16 1-7/ /8 9/ / /4 1-1/2 11/32 2-3/ /2 1-11/32 11/ / /32 3/8 2-25/ /2 2-1/4 1/2 3-1/ F 2-1/2 2-13/16 13/16 3-1/ /32 9/16 4-5/ /32 19/32 5-3/ F 4-1/2 3-9/16 1-1/16 5-7/ F 5 4-1/8 1-1/8 6-1/ /16 1-9/32 7-3/ F 6 4-5/8 1-3/8 7-3/ /8 1-3/4 9-3/ F /16 1-9/16 9-1/ F /16 2-3/ / F /2 2-1/4 13-9/ F /2 2-1/ F /4 3-1/ F /2 4-1/2 19-3/ F /2 4-1/2 21-3/ F /8 5-1/8 25-1/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 76 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

29 22-1/2 STREET EBOW Spigot x Socket 1 J1 1 J PIPE O.D. Part umber Size 1 J J1 1 Approx. Wt. (bs.) /2 1-1/16 1 1/4 1/4 1-5/ /32 1-3/8 11/32 9/ / /4 1-1/2 1-3/8 3/ /16 2-1/ /2 1-21/32 1-7/8 9/32 1/2 2-3/ /32 15/32 13/32 2-7/ /2 2-7/32 2-7/32 15/32 15/32 3-1/ F 2-1/2 4-9/ /16 13/16 3/16 3-1/ /2 2-5/16 21/32 7/16 4-5/ /8 2-7/8 1-7/8 5/8 5-1/ / /16 2-3/8 7/8 7-5/ /8 5-1/8 3-1/8 1-1/8 9-3/ EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) /2 1 1/4 1-3/ /4 1-3/8 7/16 1-5/ /2 15/ / /4 1-19/32 3/8 1-31/ /2 1-29/32 19/32 2-1/ /16 11/16 2-3/ /2 2-7/16 11/16 3-3/ /32 27/ /32 1-3/32 5-1/ F 4-1/2 4-3/ /16 5-7/ /8 1-3/8 6-5/ /4 1-23/32 7-9/ / /8 2-19/ / Page 77 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

30 45 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) /32 3-3/ / F / / / /16 3-5/ / F /8 3-7/8 14-7/ F /2 4-1/ F /8 5-7/8 19-1/ F /2 6-1/2 21-3/ F /8 7-7/8 25-1/ STREET EBOW Spigot x Socket 1 J1 1 J PIPE O.D. Part umber Size 1 J J1 1 Approx. Wt. (bs.) /2 1-9/32 1-9/32 11/32 13/32 1-3/ /4 1-1/2 1-17/32 7/16 17/ / /16 1-3/8 5/8 5/16 1-5/ /4 1-25/ /32 1/2 21/32 2-3/ /2 2-1/32 2-3/32 19/32 23/ / /8 5/8 2-23/ /2 2-5/8 2-5/8 3/4 7/8 3-11/ /32 3-1/ /32 4-5/ / /16 1-9/32 1-9/16 5-3/ /8 4-3/8 2-7/8 1-3/8 6-1/ /4 6-1/4 1-3/ / /8 5-31/ /32 1-3/4 9-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 78 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

31 15 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) F 1/2 1-5/16 5/16 1-1/ F 3/4 1-5/16 5/16 1-1/ F 1 1-5/8 3/8 1-9/ F 1-1/4 2 1/2 1-15/ F 1-1/2 2 1/2 2-3/ F 2 2-5/16 9/ / F 2-1/2 2-3/4 3/4 3-1/ F 3 3 3/4 3-15/ F / F 4-1/2 3-3/8 7/8 5-7/ F 5 3-7/8 7/8 6-1/ F 6 4-3/8 1-1/8 7-3/ F 8 5-1/2 1-1/4 9-1/ F / / / F / / F /8 2-1/ F /8 2-5/ F /4 3-1/4 19-1/ F /8 3-5/8 21-1/ F /8 3-7/8 25-1/ Page 79 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

32 60 EBOW Socket x Socket J Part umber Size J Approx. Wt. (bs.) F 1/2 1-5/8 5/8 1-1/ F 3/4 1-11/16 11/16 1-1/ F 1 2 3/4 1-9/ F 1-1/4 2-1/ / F 1-1/2 2-9/16 1-1/16 2-3/ F /16 1-3/ / F 2-1/2 3-1/2 1-1/2 3-1/ F 3 3-5/8 1-3/8 3-15/ F 4 4-1/ F 4-1/2 4-5/8 2-1/8 5-7/ F 5 5-5/16 2-5/16 6-1/ F 6 6-1/ /16 7-3/ F 8 7-5/8 3-3/8 9-1/ F / / F /4 13-9/ F /2 10-1/ F /4 12-1/ F /8 13-7/8 19-3/ F /4 16-1/4 21-1/ F / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 80 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

33 CROSS Socket x Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) /2 17/32 17/32 1-9/32 1-9/ / /32 1-3/ /4 9/16 9/16 1-9/16 1-9/16 3-1/8 3-1/8 1-5/ /16 13/ / /16 3-7/8 3-7/8 1-5/ /4 1-3/32 1-3/ / / / /32 2-1/ /2 1-1/4 1-1/4 2-19/ /32 5-5/32 5-5/32 2-5/ / / / / / / / /2 1-21/ / / / / /32 3-3/ /16 2-1/ / / / /32 4-1/ /2 2-1/2 4-1/2 4-1/2 9-1/32 9-1/32 5-1/ F / F 6 6-3/16 6-3/16 9-7/16 9-7/ /8 18-7/8 7-3/ F 8 8-9/16 8-9/ / / /8 25-5/8 9-1/ F /8 9-3/8 15-1/8 14-5/8 30-1/4 29-1/4 11-1/ F /4 10-3/ / /8 13-9/ F / / / / F / / / F /8 13-3/8 24-7/8 22-3/8 49-3/4 44-3/4 19-1/ F /4 15-1/2 28-1/4 25-1/2 56-1/ / F /8 17-1/2 33-1/8 29-1/2 66-1/ / Page 81 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

34 REDUCI CROSS Socket x Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) /4x3/4x1/2x1/2 1-7/16 1-1/16 1-9/ /16 3-1/8 3-5/8 1-5/16 1-5/ x1x3/4x3/4 23/32 5/8 1-5/8 1-5/8 3-1/4 3-1/4 1-7/8 1-17/ /4x1-1/4x3/4x3/4 1-1/8 1-21/ / / /16 5-5/16 2-1/32 2-1/ /4x1-1/4x1x1 1-3/32 1-9/ /32 2-5/8 4-23/32 5-7/32 2-1/16 2-1/ x2x3/4x3/4 11/16 1-7/16 2-7/32 2-7/ /32 4-7/8 2-29/ / x2x1x1 13/16 1-3/8 2-3/16 2-1/2 4-3/ /4 1-5/ x2x1-1/4x1-1/4 1-9/16 2-1/ / / /32 6-5/8 2-13/ / x2x1-1/2x1-1/2 1-17/ / /32 3-1/8 5-13/16 6-1/4 2-25/ / /2x2-1/2x3/4x3/4 1-21/32 3-3/ /32 4-3/ /32 8-7/32 3-3/8 3-3/ /2x2-1/2x1x1 7/8 1-23/ /16 2-7/8 5-11/32 5-3/4 3-1/2 1-3/ x3x1x1 1-15/16 3-1/4 3-15/16 4-3/8 7-7/8 8-3/ x3x1-1/4x1-1/ /8 3-15/16 4-3/8 7-7/8 8-3/ x3x1-1/2x1-1/2 1-31/32 3-1/ /32 4-3/8 7-15/ /32 4-1/32 4-1/ x3x2x2 2-1/16 2-5/8 3-31/32 4-9/ /32 8-9/16 4-1/32 4-1/ x3x2-1/2x2-1/2 1-15/ / / /32 7-7/8 8-11/ x4x2x2 2-1/2 3-17/32 4-1/2 4-29/32 9-1/ /16 5-1/32 5-1/ F 4x4x2x2 4-1/2 4-1/4 6-3/ / / / x4x2-1/2x2-1/2 2-1/2 2-15/16 4-1/2 4-15/ / x4x3x3 2-1/2 2-15/16 4-1/2 4-15/ / F 6x6x2x2 5-1/8 5-5/16 8-3/8 7-1/ /4 14-1/8 7-3/ / F 6x6x2-1/2x2-1/2 5-3/8 5-13/16 8-5/8 7-13/ /4 15-5/8 7-3/16 3-1/ F 6x6x3x3 5-7/8 6-1/16 9-1/8 8-5/ /4 16-5/8 7-3/ / F 6x6x4x4 6-1/2 6-3/8 9-3/4 8-5/8 19-1/2 17-1/4 7-3/ F 8x8x2x2 5-5/16 6-1/4 9-9/ / /4 2-11/ F 8x8x3x3 5-11/ /16 9-1/4 19-7/8 18-1/2 9-1/4 3-15/ F 8x8x4x4 6-5/16 7-5/ /16 9-9/ /8 19-1/8 9-1/ F 8x8x6x6 7-5/16 7-3/8 11-9/ /8 23-1/8 21-1/4 9-1/4 7-3/ F 10x10x2x2 4-7/8 7-1/4 10-1/ / /2 2-11/ F 10x10x2-1/2 5-5/8 7-3/4 10-7/8 9-3/4 21-3/4 19-1/2 11-1/2 3-1/ F 10x10x3x3 5-3/ /8 10-1/4 21-1/4 20-1/2 11-1/2 3-15/ F 10x10x4x4 5-7/8 8-5/ /8 10-9/ /4 21-1/8 11-1/ F 10x10x6x6 6-7/8 8-3/8 12-1/8 11-5/8 24-1/4 23-1/4 11-1/2 7-3/ F 10x10x8x8 8-1/2 8-5/ /4 12-9/ /2 25-1/8 11-1/2 9-1/ F 12x12x2x2 5-1/4 8-1/4 11-1/ / / F 12x12x2-1/2x2-1/2 5-3/4 8-3/ / /2 13-9/16 3-1/ Outlet sized with bushing ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 82 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

35 REDUCI CROSS Socket x Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) F 12x12x3x3 5-3/ / /2 13-9/ / F 12x12x4x / /4 11-9/ /2 23-1/8 13-9/ F 12x12x6x /8 14-1/4 12-5/8 28-1/2 25-1/4 13-9/16 7-3/ F 12x12x8x8 8-3/4 9-5/ / /8 13-9/16 9-1/ F 12x12x10x /4 10-3/8 16-1/2 15-5/ /4 13-9/ / F 14x14x2x2 5-7/8 8-13/ /8 10-9/ /4 21-1/8 14-7/8 2-11/ F 14x14x3x3 6-1/2 9-9/ / / /8 14-7/8 3-15/ F 14x14x4x4 7-3/8 9-7/8 14-3/8 12-1/8 28-3/4 24-1/4 14-7/ F 14x14x6x6 7-7/8 9-15/ /8 13-3/ /4 26-3/8 14-7/8 7-3/ F 14x14x8x8 8-7/8 9-7/8 15-7/8 14-1/8 31-3/4 28-1/4 14-7/8 9-1/ F 14x14x10x / / /8 16-3/ /4 32-3/8 14-7/8 11-1/ F 14x14x12x /8 10-3/4 18-3/ / /8 13-9/ F 16x16x2x2 6-3/8 9-3/4 14-3/8 11-1/2 28-3/ / F 16x16x3x3 6-1/2 10-1/2 14-1/2 12-3/ / / F 16x16x4x / / / F 16x16x6x / / / / F 16x16x8x / / / / F 16x16x10x / / / / F 16x16x12x / / / / F 16x16x14x / / / / F 18x18x2x2 6-1/ / /4 12-7/ /2 24-7/8 19-1/8 2-11/ F 18x18x3x3 7-1/4 11-7/ / / /2 27-3/8 19-1/8 3-15/ F 18x18x4x4 7-3/4 11-3/4 16-3/ / / F 18x18x6x6 8-3/ / /4 15-1/ /2 30-1/8 19-1/8 7-3/ F 18x18x8x8 9-3/4 11-3/4 18-3/ / /8 9-1/ F 18x18x10x / / /4 18-1/ /2 36-1/8 19-1/8 11-1/ F 18x18x12x /4 12-5/8 20-3/4 18-7/8 41-1/2 37-3/4 19-1/8 13-9/ F 18x18x14x /8 12-7/8 21-7/8 19-7/8 43-3/4 39-3/4 19-1/8 14-7/ F 18x18x16x / / / / /4 43-5/8 19-1/ F 20x20x2x2 6-3/4 12-7/ /4 14-3/ /2 28-3/8 21-3/ / F 20x20x3x3 7-1/4 12-7/ / / /2 29-3/8 21-3/ / F 20x20x4x4 8-1/4 12-3/4 18-1/ / / F 20x20x6x6 19-1/ / /4 16-1/ /2 32-1/8 21-3/16 7-3/ Page 83 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

36 REDUCI CROSS Socket x Socket x Socket x Socket Part umber Size Approx. Wt. (bs.) F 20x20x8x8 10-1/4 12-3/4 20-1/ / /16 9-1/ F 20x20x10x / / /4 19-1/ /2 38-1/8 21-3/ / F 20x20x12x /4 13-5/8 22-1/4 19-7/8 44-1/2 39-3/4 21-3/ / F 20x20x14x /4 13-7/8 23-1/4 20-7/8 46-1/2 41-3/4 21-3/ / F 20x20x16x / / / / /2 45-5/8 21-3/ F 20x20x18x /4 14-3/8 25-1/4 23-3/8 50-1/2 46-3/4 21-3/ / F 24x24x2x2 8-1/8 14-5/ /8 16-1/ /4 32-1/8 25-3/8 2-11/ F 24x24x3x3 8-5/8 14-5/6 20-5/8 16-9/ /4 33-1/8 25-3/8 3-15/ F 24x24x4x4 9-1/8 14-5/8 21-1/8 16-7/8 42-1/4 33-3/4 25-3/ F 24x24x6x6 10-1/ / / / /4 35-7/8 25-3/8 7-3/ F 24x24x8x8 11-1/8 14-5/8 23-1/8 18-7/8 46-1/4 37-3/4 25-3/8 9-1/ F 24x24x10x / / / / /4 41-7/8 25-3/8 11-1/ F 24x24x12x /8 15-1/2 25-1/8 21-3/4 50-1/4 43-1/2 25-3/8 13-9/ F 24x24x14x /4 15-3/4 25-3/4 22-3/4 51-1/2 45-1/2 25-3/8 14-7/ F 24x24x16x / / / / /2 49-3/8 25-3/ F 24x24x18x /4 16-1/4 27-3/4 25-1/4 55-1/2 50-1/2 25-3/8 19-1/ F 24x24x20x /4 17-3/8 28-3/4 27-3/8 57-1/2 54-3/4 25-3/8 21-3/ CROSS Socket x ipt x Socket x ipt Part umber Size Approx. Wt. (bs.) 421A-010 1x1x1x1 21/32 1-1/ /32 1-7/8 3-7/16 3-3/4 1-5/8.19 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 84 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

37 COUPI Socket x Socket Part umber Size Approx. Wt. (bs.) /8 2-5/8 7/8 1/ /2 1-19/32 1-3/32 3/ /2 1-5/8 1-1/16 1/ /4 2-3/32 1-5/16 3/ /4 2-3/32 1-5/16 3/ /8 1-19/32 1/ / /32 3/ /4 2-11/ /32 3/ /2 2-5/8 2-7/32 1/ /8 2-3/4 3/ /2 3-3/4 3-5/16 3/ /32 4 3/ /4 5-1/32 3/ F 4-1/2 6-1/4 5-7/16 1-1/ /16 6-1/8 3/ /16 7-1/4 1/ / /32 1/ /8 11-9/16 15/ F /8 11-1/2 1-7/ / /32 3/ F /4 13-9/16 2-1/ / /8 7/ F /4 14-7/8 2-1/ F / / F /4 19-1/8 3-3/ F / F /4 25-3/8 5-1/ Page 85 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

38 DEEP SOCKET COUPI Socket x Socket Part umber Size Approx. Wt. (bs.) /2 2-1/2 1-1/16 3/ /4 2-7/8 1-5/16 3/ /8 1-5/8 3/ /2 4-5/8 2-1/4 1/ /32 2-3/4 3/ /2 7-1/2 3-5/16 1/ / /16 5 5/ F 4-1/2 9-1/2 5-7/16 1-1/ F /16 1-1/ REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) /4x1/2 1-25/32 1-5/16 1-3/32 1/ x1/2 2-7/32 1-5/8 1-3/32 13/ x3/4 2-1/8 1-5/8 1-5/16 1/ /4x1/2 2-9/16 2-3/32 1-5/32 7/ /4x3/4 2-19/32 2-3/32 1-5/8 11/ /4x1 2-11/16 2-1/8 1-3/4 5/ /2x3/4 2-13/ / /32 7/ /2x1 2-23/32 2-7/32 1-5/8 3/ /2x1-1/4 2-13/ /32 2-1/8 5/ x1/2 3-3/32 2-7/8 1-5/32 11/ x3/4 3-7/32 2-7/8 1-13/32 23/ x1 3-1/2 2-13/16 2-5/16 3/ x1-1/4 3-1/ / /32 17/ x1-1/2 2-13/ /32 2-1/4 1/ /2x1-1/2 3-3/4 3-1/2 2-3/8 19/ /2x2 3-5/8 3-15/32 2-7/8 7/ x1 4-3/16 4-5/32 2-7/8 1-1/ x1-1/2 4-3/16 4-5/ / Outlet sized with bushing ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 86 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

39 REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) x /32 2-7/8 5/ x2-1/2 4-5/ / F 3x2-1/2 5-5/8 3-7/8 3-1/4 1-3/ x3/4 5-7/32 5-1/ /32 2-3/ x1 5-1/4 5-1/ /32 2-5/ x /32 2-3/4 1-5/ x2-1/ /4 4-1/8 3/ x3 4-5/8 5-1/4 4-5/32 15/ F 4x3 6-1/2 4-15/ / F 4-1/2x4 6-11/16 5-7/ / F 5x /16 5-1/4 3-1/ F 5x4 7-11/16 6-1/ / F 5x4-1/2 7-7/16 6-1/16 5-7/ / F 6x2 9-1/4 7-1/8 5-1/16 4-5/ F 6x3 9-3/16 7-1/8 5-1/4 4-1/ x4 6-15/32 7-1/4 5-1/ / F 6x4 8-7/8 7-1/ / F 6x5 8-5/8 7-1/8 6-1/16 2-3/ F 6x4-1/2 8-11/16 7-1/8 5-7/ / F 8x2 14-7/8 9-3/ / F 8x /16 9-3/ / x4 8-7/ /32 5-1/ / F 8x4 14-1/2 9-3/ F 8x5 14-1/4 9-3/16 6-1/ x6 8-13/ /32 7-9/ / F 8x /16 7-3/16 3-1/ F 10x2 17-5/8 11-3/ F 10x3 17-9/ / / x4 10-7/ /32 5-1/ / F 10x4 17-1/4 11-3/ / F 10x /8 6-1/16 8-3/ x6 10-7/ /16 7-9/32 2-1/ F 10x6 13-7/8 11-3/8 7-1/4 5-3/ x8 10-7/ /8 9-3/8 1-3/ F 10x8 13-1/4 11-9/16 9-7/16 3-3/ F 12x2 24-3/8 13-9/ / F 12x3 24-5/ / / F 12x / / F 12x5 23-3/4 13-9/16 6-1/ / Outlet sized with bushing Page 87 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

40 REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) x / /32 7-9/32 3-9/ F 12x6 20-1/2 13-9/16 7-1/ x / /32 9-3/8 2-1/ F 12x8 15-3/4 13-9/16 9-7/16 5-1/ x / / /32 1-9/ F 12x /8 13-9/ /16 3-5/ F 14x3 26-3/ / / F 14x4 25-7/ / / F 14x6 22-3/ /16 7-1/4 12-1/ F 14x / /4 9-1/4 10-9/ F 14x / /16 4-3/ F 14x / /4 3-1/ F 16x2 32-7/ / F 16x4 32-1/ / F 16x / / F 16x8 24-3/ / / F 16x / / F 16x / /4 4-5/ F 16x /2 16-7/8 14-7/8 3-1/ F 18x / / F 18x8 33-3/ / / F 18x / / F 18x / /8 12-5/ F 18x / /8 11-1/ F 18x / / F 20x4 50-1/2 21-1/ / F 20x /8 7-3/ / F 20x8 42-3/4 21-1/8 9-7/ / F 20x /8 11-9/ / F 20x /8 21-1/8 13-3/4 20-5/ F 20x /2 21-3/8 14-7/8 19-1/ F 20x /8 21-1/ / F 20x /4 21-1/8 19-1/8 4-1/ F 24x6 59-1/4 25-3/16 7-3/ F 24x /16 9-7/ / F 24x /4 25-3/ / F 24x /8 25-3/ /4 30-7/ F 24x /4 25-3/ /8 29-3/ F 24x /8 25-3/ / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 88 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

41 REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) F 24x /2 25-3/ /8 14-1/ F 24x /4 25-3/ /16 6-3/ ECCETRIC REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) FE 1-1/4x1 4-7/8 1-15/16 1-9/16 2-1/ FE 1-1/2x1-1/4 4-5/8 2-3/ /16 1-5/ FE 2x1-1/4 5-3/4 2-5/8 1-15/16 2-1/ FE 2x1-1/2 5-1/2 2-11/16 2-3/16 2-1/ FE 2-1/2x1-1/4 9-5/8 3-3/ /16 6-1/ FE 2-1/2x1-1/2 9-3/8 3-3/16 2-3/16 5-7/ FE 2-1/2x2 6-3/8 3-3/ /16 2-5/ FE 3x1-1/4 11-1/8 3-13/ /16 7-3/ FE 3x1-1/2 10-7/8 3-13/16 2-3/16 7-1/ E 3x2 5-7/8 4-5/32 2-7/8 2-15/ FE 3x2 7-15/ / / / FE 3x2-1/2 6-3/4 3-7/8 3-1/4 2-1/ FE 4x1-1/4 16-1/8 4-15/ / / FE 4x1-1/2 15-7/8 4-15/16 2-3/ / E 4x2 7-15/ /32 4-1/ FE 4x / / / / FE 4x2-1/2 11-3/4 4-15/16 3-1/4 7-1/ FE 4x3 8-5/8 4-15/ /16 4-1/ FE 5x4 9-7/16 6-1/ / FE 6x1-1/2 23-9/16 7-1/8 2-3/ / FE 6x2 15-7/8 7-1/8 2-11/ / Page 89 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

42 ECCETRIC REDUCER COUPI Socket x Socket 1 Part umber Size 1 Approx. Wt. (bs.) FE 6x2-1/2 19-7/16 7-1/8 3-1/4 14-3/ FE 6x3 16-5/16 7-1/8 3-15/ / E 6x4 8-31/32 7-9/32 5-1/ / FE 6x4 11-1/8 7-1/ / FE 6x5 10-5/8 7-1/8 6-1/16 4-3/ FE 8x2 27-1/8 9-3/ / / FE 8x3 25-5/16 9-3/ / / FE 8x4 19-5/8 9-3/ / FE 8x5 15-5/8 9-3/16 6-1/ / FE 8x6 14-3/8 9-3/16 7-3/16 6-7/ FE 10x4 22-3/8 11-3/ / FE 10x5 22-3/8 11-3/8 6-1/ / FE 10x6 17-1/8 11-3/8 7-1/4 8-5/ FE 10x8 16-5/ /8 9-1/4 6-13/ FE 12x4 32-3/8 13-1/ / FE 12x5 32-3/8 13-1/2 6-1/ / FE 12x6 27-1/8 13-1/2 7-1/4 17-5/ FE 12x8 26-5/ /2 9-1/4 15-3/ FE 12x /8 13-1/2 11-1/2 6-7/ FE 14x6 31-3/ /4 21-1/ FE 14x8 30-9/ /4 19-5/ FE 14x / /4 10-1/ FE 14x /4 5-3/ FE 16x6 43-5/ /4 32-3/ FE 16x / /4 30-9/ FE 16x / /2 21-5/ FE 16x / /4 12-1/ FE 16x /8 14-7/8 6-3/ FE 18x /4 43-3/ FE 18x8 55-3/ / / FE 18x / / FE 18x / /4 23-5/ FE 18x / /8 18-1/ FE 18x ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 90 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

43 Schedule 40 Fittings & Accessories Technical Information FABRICATED REPAIR COUPI asket x asket 1 1 Part umber Size 1 1 Approx. Wt. (bs.) F 2 9-1/ /16 3-1/ F /2 11-3/4 3-15/16 4-9/ F / /8 5-3/ F /2 19-3/4 7-3/8 7-3/ F /8 21-1/2 9-1/ / F /8 11-1/ / F /8 22-3/8 13-3/ / F / /8 16-1/ F / / COUPI Fipt x Fipt Part umber Size Approx. Wt. (bs.) /2 1-9/16 1-1/8 7/ /4 1-9/ /32 3/ / /16 3/ /4 2-3/16 2-9/32 3/16.21 Page 91 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

44 SPECIA REIFORCED COUPI SR Fipt x SR Fipt Part umber Size Approx. Wt. (bs.) SR 1/2 1-9/16 1-3/16 1/ SR 3/4 1-29/32 1-3/8 3/ SR / /32 1/ SR 1-1/4 2-1/16 2-1/16 3/ SR 1-1/2 2-3/16 2-7/16 1/ SR 2 2-1/4 3 1/4.42 REDUCER COUPI Fipt x Fipt 1 Part umber Size 1 Approx. Wt. (bs.) /4x1/2 1-11/16 1-3/8 1-3/16 1/4.06 SPECIA REIFORCED REDUCER COUPI SR Fipt x SR Fipt 1 Part umber Size 1 Approx. Wt. (bs.) SR 3/4x1/2 1-3/4 1-3/8 1-7/32 1/4.08 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 92 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

45 IPS TO PIP ADAPTER Spigot x Socket IPS PIPE O.D. PIP SOCKET Part umber Size Approx. Wt. (bs.) / / F / F / RISER EXTESIO Fipt x ipt RISER O.D. Part umber Size Approx. Wt. (bs.) /2 1-1/2 1-1/8 1/ /4 1-17/32 1-5/16 5/ /32 1-5/8 3/16.07 FEAE ADAPTER Socket x Fipt Part umber Size Approx. Wt. (bs.) /8 1-7/16 1 3/ /2 1-19/32 1-3/32 3/32.04 D /2 2-1/8 1-1/8 1/ /4 1-27/32 1-5/16 3/32.05 Page 93 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

46 FEAE ADAPTER Socket x Fipt Part umber Size Approx. Wt. (bs.) D /4 2-7/32 1-5/16 3/ /32 3/ /4 2-9/ /32 1/ /2 2-5/16 2-7/32 3/ /2 2-3/4 1/ /2 3-1/4 3-5/16 3/ /2 4 1/ /32 5-1/32 3/ /16 6-5/16 3/ /4 7-3/16 5/ /16 9-3/8 1/ F / / F /8 14-1/8 2-5/ SPECIA REIFORCED FEAE ADAPTER Socket x SR Fipt 1 Part umber Size 1 Approx. Wt. (bs.) SR 1/4 1-5/16 13/16 13/16 5/ SR 3/8 1-7/16 15/16 15/16 1/ SR 1/2 1-23/32 1-5/32 1-3/16 3/ SR 3/4 1-7/8 1-13/32 1-3/8 3/ SR 1 2-1/8 1-3/4 1-3/4 1/ SR 1-1/4 2-5/16 2-3/32 2-3/32 1/ SR 1-1/2 2-7/16 2-7/16 2-7/16 1/ SR / / SR 2-1/2 3-1/4 3-9/16 3-9/16 1/ SR 3 3-1/2 4-9/32 4-5/16 5/ SR /16 5-7/32 5-7/32 3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 94 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

47 REDUCI FEAE ADAPTER Socket x Fipt 1 Part umber Size 1 Approx. Wt. (bs.) /2x1/4 1-19/32 1-3/32 13/16 1/ /2x3/8 1-17/32 1-3/32 15/16 3/ /2x3/4 1-19/32 1-3/32 1-5/16 3/ /4x1/4 1-15/ /32 27/32 13/ /4x1/2 1-13/16 1-5/16 1-1/8 3/ /4x1 1-15/16 1-5/8 1-5/16 3/ x1/2 1-27/32 1-5/8 1-1/8 3/ x3/4 2-1/8 1-5/8 1-5/16 3/ x1-1/2 2-3/8 1-5/8 2-7/32 1/ /4x1 2-1/2 1-31/32 1-5/8 11/ x1/2 2-25/ /32 1-3/16 21/ F 4-1/2x4 8-1/4 5-5/ / F 8x2 14-7/8 8-5/8 5-1/16 9-5/ F 8x4 15-3/16 9-1/ / F 8x /4 9-1/4 4-1/ SPECIA REIFORCED REDUCI FEAE ADAPTER Socket x SR Fipt 1 Part umber Size 1 Approx. Wt. (bs.) SR 1/2x1/4 1-5/8 1-3/32 27/32 1/ SR 1/2x3/8 1-17/32 1-3/32 31/32 3/ SR 1/2x1/4 1-3/4 1-3/16 1-3/8 1/ SR 3/4x1/4 1-15/ /32 27/32 13/ SR 3/4x1/2 1-7/8 1-3/8 1-3/16 1/ SR 3/4x1 2-1/ / /32 1/ SR 1x1/ /16 1-3/16 5/ SR 1x3/4 2-1/16 1-3/4 1-3/8 7/ SR 2x1/2 2-13/ /32 1-3/16 21/32.20 Page 95 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

48 SPIOT FEAE ADAPTER Spigot x Fipt PIPE O.D. 1 Part umber Size 1 Approx. Wt. (bs.) /2 1-19/32 1-3/32 3/ /4 1-15/16 1-3/8 5/ / /32 5/ /4 2-9/16 2-1/16 9/ /2 2-5/8 2-5/16 7/ /4 2-27/32 3/ /8 4 9/ /8.83 SPECIA REIFORCED SPIOT FEAE ADAPTER Spigot x SR Fipt PIPE O.D. 1 Part umber Size 1 Approx. Wt. (bs.) SR 1/2 1-3/4 1-3/16 5/ SR 3/4 1-15/16 1-3/8 11/ SR 1 2-1/4 1-23/32 5/ SR 1-1/4 2-7/16 2-1/16 3/ SR 1-1/2 2-5/8 2-13/32 13/ SR /16 3 3/ SR /16 4-1/4 15/ SR 4 4-3/8 5-7/32 9/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 96 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

49 SPECIA REIFORCED SPIOT REDUCI FEAE ADAPTER Spigot x SR Fipt PIPE O.D. 1 Part umber Size 1 Approx. Wt. (bs.) SR 1/2x1/4 1-3/8 27/32 3/ SR 3/4x1/4 2-1/16 27/32 1/ SR 1x1/4 2-3/8 27/32 11/16.08 AE ADAPTER ipt x Socket 1 Part umber Size 1 Approx. Wt. (bs.) /8 1-3/8 7/8 7/ /2 1-17/32 1-1/8 5/ /4 1-23/32 1-5/16 5/ /16 1-5/8 7/ /4 2-7/ /32 3/ /2 2-17/32 2-1/4 3/ /8 2-3/4 3/ /2 3-13/ /32 9/ /32 4-3/32 9/ /32 5-1/8 9/ /32 6-1/4 5/ /16 7-9/32 11/ /16 9-3/8 13/ F / /16 3-3/ F /8 14-1/8 2-3/ Page 97 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

50 REDUCI AE ADAPTER ipt x Socket 1 Part umber Size 1 Approx. Wt. (bs.) /8x1/2 1-11/16 1-3/16 1/ /2x3/8 1-17/32 15/16 1/ /2x3/4 1-25/32 1-5/16 5/ /2x1 2-9/32 1-5/8 17/ /4x1/2 1-17/32 1-1/8 3/ /4x1 1-15/ /32 3/ x3/4 1-29/32 1-3/16 3/ x1-1/4 2-1/4 1-31/32 7/ x1-1/2 2-3/8 2-1/4 1/ /4x1 2-1/4 1-5/8 3/ /4x1-1/2 2-17/32 2-7/32 3/ /2x1-1/4 2-15/32 2 7/ /2x2 2-5/8 2-3/4 15/ x1-1/2 2-9/16 2-7/32 3/ x2-1/2 3-3/32 3-5/16 1/ x3 3-13/ /2x3 4-3/32 4-1/32 5/ /2x4 3-29/32 5-3/16 5/ x4 4-5/8 5-1/16 7/ F 6x /2 11-3/8 7-15/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 98 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

51 AE ADAPTER Spigot x ipt PIPE O.D. Part umber Size Approx. Wt. (bs.) /2 1-11/16 11/ /4 2 13/ /4 11/ x3/4 1-15/16 1/ /4 2-9/32 9/ /2 2-7/16 5/ /16 3/8.17 REDUCER BUSI (Flush Style) Spigot x Socket PIPE O.D. Part umber Size Approx. Wt. (bs.) /8x1/4 31/32 5/ /2x1/4 1-3/32 13/ /2x3/8 7/8 3/ /4x1/2 1-1/16 9/ x1/2 1-1/4 15/ x3/4 1-1/4 5/ /4x1/2 1-13/32 21/ /4x3/4 1-1/2 19/ /4x1 1-1/2 7/ /2x1/2 1-15/32 23/ /2x3/4 1-7/16 7/ /2x1 1-17/32 1/ /2x1-1/4 1-17/32 9/ x1/2 1-5/8 7/ x3/4 1-9/16 9/ x1 1-9/16 17/ x1-1/4 1-19/32 11/ x1-1/2 1-9/16 1/ /2x1/2 2-1/4 1-7/16.32 Page 99 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

52 REDUCER BUSI (Flush Style) Spigot x Socket PIPE O.D. Part umber Size Approx. Wt. (bs.) /2x3/4 2-3/8 1-3/ /2x1 2-1/32 29/ /2x1-1/4 2-3/16 1-1/ /2x1-1/2 2-5/32 1-3/ /2x2 2-1/16 11/ x1/2 2-13/32 1-5/ x3/4 2-5/16 1-5/ x1 2-7/32 1-1/ x1-1/4 2-9/32 1-1/ x1-1/2 2-9/32 31/ x2 2-7/32 9/ x2-1/2 2-7/32 7/ x1 2-19/32 1-9/ x1-1/4 2-19/32 1-7/ x1-1/2 2-19/32 1-1/ x2 2-13/32 1-1/ x2-1/2 2-5/16 9/ x3 2-11/32 15/ x2 3-13/32 2-1/ x3 3-7/ / x4 2-31/32 23/ x2 3-17/32 2-5/ x3 3-17/32 1-5/ x4 3-9/16 1-1/ x5 3-17/32 7/ x / x3 5-1/4 3-1/ x4 4-17/32 2-1/ x5 4-3/4 1-3/ x6 4-13/32 1-3/ x x / x / x6 5-11/32 2-5/ x / x6 6-11/16 3-3/ F 12x6 6-7/16 3-3/ Outlet sized with bushing ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 100 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

53 REDUCER BUSI (Flush Style) Spigot x Socket PIPE O.D. Part umber Size Approx. Wt. (bs.) x8 6-1/2 2-7/ x /32 1-9/ F 12x F 14x6 7-11/ / F 14x8 7-5/16 3-5/ F 14x10 7-1/2 2-1/ F 14x F 16x6 8-11/ / F 16x8 8-5/16 4-5/ F 16x10 8-1/2 3-1/ F 16x F 16x F 18x6 9-11/ / F 18x8 9-5/16 5-5/ F 18x10 9-1/2 4-1/ F 18x F 18x F 18x F 20x / / F 20x8 10-5/16 6-5/ F 20x /2 5-1/ F 20x F 20x F 20x F 20x F 24x / / F 24x8 12-5/16 8-5/ F 24x /2 7-1/ F 24x F 24x F 24x F 24x F 24x Page 101 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

54 REDUCER BUSI (Flush Style) Spigot x Fipt PIPE O.D. Part umber Size Approx. Wt. (bs.) /8x1/4 31/32 3/ /2x1/8 1 9/ /2x1/4 1-1/32 7/ /2x3/8 1 7/ /4x1/4 1-7/32 5/ /4x1/2 1-1/4 1/ x1/8 1-3/8 13/ x1/4 1-13/32 25/ x3/8 1-13/32 19/ x1/2 1-3/8 21/ x3/4 1-1/16 3/ /4x1/2 1-15/32 23/ /4x3/4 1-15/32 23/ /4x1 1-7/16 1/ /2x1/8 1-11/16 1-1/ /2x1/4 1-19/32 15/ /2x1/2 1-23/32 31/ /2x3/4 1-9/16 27/ /2x1 1-23/32 13/ /2x1-1/4 1-1/2 9/ x1/4 1-3/4 1-5/ x1/2 1-29/32 1-5/ x3/4 1-7/8 1-5/ x1 1-7/ x1-1/4 1-5/8 13/ x1-1/2 1-19/32 5/ /2x1/2 2-3/8 1-5/ /2x3/4 2-3/8 1-9/ /2x1 2-5/32 1-1/ /2x1-1/4 2-3/8 1-3/ /2x1-1/2 2-3/8 1-3/ /2x2 2-1/16 1-1/ x3/4 2-9/32 1-9/ x1 2-1/4 1-11/ x1-1/4 2-1/4 1-5/ x1-1/2 2-1/4 1-1/ x2 2-3/16 1-7/ x2-1/2 2-3/8 3/4.46 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 102 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

55 REDUCER BUSI (Flush Style) Spigot x Fipt PIPE O.D. Part umber Size Approx. Wt. (bs.) x2 2-13/ / x2-1/2 2-21/32 1-3/ x3 2-13/ x3 3-7/ / x4 2-15/ / x2 3-17/ / x3 3-17/32 2-1/ x4 3-17/32 2-1/ x5 3-31/32 2-3/ SPECIA REIFORCED REDUCER BUSI (Flush Style) Spigot x SR Fipt PIPE O.D. Part umber Size Approx. Wt. (bs.) SR 1x1/4 1-13/32 25/ SR 1-1/2x1/4 1-19/32 15/ SR 1-1/2x1/2 1-11/16 15/ SR 1-1/2x3/4 1-9/16 7/ SR 2x1/2 1-29/32 1-5/ SR 2x3/4 1-7/8 1-1/ SR 2x1 1-29/32 31/ SR 3x3/4 2-1/4 1-1/ SR 3x1 2-1/4 1-11/ SR 3x1-1/4 2-1/4 1-5/ SR 3x1-1/2 2-1/4 1-3/ SR 4x2 2-13/ / SR 6x2 3-5/16 2-9/ SR 6x3 3-9/32 1-7/ SR 6x4 3-1/2 2-1/ Page 103 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

56 REDUCER (T.T.) BUSI (Flush Style) ipt x Fipt Part umber Size Approx. Wt. (bs.) /8x1/4 13/16 1/ /2x1/8 27/32 13/ /2x1/4 29/32 3/ /2x3/8 15/16 3/ /4x1/4 1-1/32 15/ /4x3/8 1-1/32 7/ /4x1/2 15/16 3/ x1/4 1-1/8 17/ x1/2 1-1/16 5/ x3/4 1-1/8 13/ /4x1/2 1-5/16 9/ /4x3/4 1-9/32 9/ /4x1 1-3/16 9/ /2x1/2 1-11/32 19/ /2x3/4 1-11/32 19/ /2x1 1-11/32 7/ /2x1-1/4 1-11/32 13/ x1/2 1-3/8 21/ x3/4 1-3/8 5/ x1 1-3/8 15/ x1-1/4 1-3/8 7/ x1-1/2 1-3/8 13/ /2x2 1-29/32 7/ x1-1/2 1-15/16 29/ x2 1-15/16 15/ x2-1/2 1-15/16 5/ x2 2-1/8 1-1/ x3 2-1/8 1/2.72 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 104 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

57 SPECIA REIFORCED REDUCER (T.T.) BUSI (Flush Style) ipt x SR Fipt Part umber Size Approx. Wt. (bs.) SR 1-1/2x1/2 1-11/32 19/ SR 1-1/2x3/4 1-11/32 19/ SR 2x1/2 1-3/8 21/ SR 2x3/4 1-3/8 5/ SR 2x1 1-3/8 15/ SR 4x2 2-1/8 1-1/8.88 IPT ADAPTER ipt x Fipt 1 CAP Socket Part umber Size 1 Approx. Wt. (bs.) /8 1-13/32 29/32 5/ /4 2-3/16 2 5/ /8x1/2 1-1/2 1-1/16 3/ /2x3/4 1-17/32 1-5/16 5/32.04 W Part umber Size W Approx. Wt. (bs.) /8 7/ /2 1-3/32 1-1/ /4 1-5/16 19/ /32 1-5/ /4 1-31/32 1-3/ /2 2-1/4 1-29/ /32 2-1/ /2 3-5/16 2-9/16.33 Page 105 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

58 CAP Socket W Part umber Size W Approx. Wt. (bs.) / /16 3-1/ F 4-1/2 5-7/16 3-5/ /8 4-11/ / /16 6-3/ F /16 5-1/ F /8 6-7/ F / F / F / F / / F / / CAP Fipt W Part umber Size W Approx. Wt. (bs.) /8 15/16 25/ /2 1-1/8 1-1/ /4 1-11/32 1-1/ /8 1-5/ /4 2-1/16 1-7/ /2 2-1/4 1-9/ /4 1-23/ /2 3-9/32 2-5/ / / / /32 3-3/ /16 3-5/ F 8 9-3/8 4-3/ F /8 5-3/ F /16 6-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 106 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

59 SPECIA REIFORCED CAP SR Fipt W Part umber Size W Approx. Wt. (bs.) SR 1-1/4 2-1/16 1-3/8.09 PU Spigot PIPE O.D. Part umber Size Approx. Wt. (bs.) /8 31/ /2 7/ /4 1-1/ / /4 1-17/ /2 1-5/ / /2 2-3/ / / / F 6 9-1/ F / F / F / F / F / F F / F / Page 107 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

60 COUTER SUK PU Spigot PIPE O.D. Part umber Size Approx. Wt. (bs.) CS 3/4 1-1/ CS 1 1-5/32.04 PU ipt Part umber Size Approx. Wt. (bs.) /8 25/ /2 13/ /4 7/ / /4 1-9/ /2 1-11/ / /2 1-31/ / / / F F / F / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 108 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

61 ISERT ADAPTER (PVC White) Insert x I.P.S. Spigot Adapter AST D 2609 IPS PIPE O.D. Part umber Size Approx. Wt. (bs.) /2 2-7/16 7/ /4 2-23/32 7/ /16 1/ /4 3-1/32 1/ /2 3-5/16 5/ /2 3/ /32 13/ /32 5/16.73 ISERT ADAPTER (PVC White) Insert x I.P.S. Spigot PIPE O.D. Part umber Size Approx. Wt. (bs.) / * 8 9-7/8 5/ *Fabricated ISERT ADAPTER Insert x Socket AST D Part umber Size 1 Approx. Wt. (bs.) /2 2-3/8 1-1/16 1/ /4 2-7/16 1-5/16 5/ /8 1-5/8 1/ /4 2-11/16 2 3/ /2 3-1/16 2-1/4 3/ /16 3/ /4 4 5/ /8 5 3/8.81 Page 109 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

62 WYE Socket x Socket x Socket Pressure Rating 1/2" -2" F 2-1/2" -6" F 8" & Up F Part umber Size Approx. Wt. (bs.) /2 1/4 1-3/16 1-3/16 1-1/8 2-1/16 2-1/16 3-3/16 1-5/32 1-5/ /4 5/16 1-3/8 1-3/8 1-5/16 2-3/8 2-3/8 3-23/32 1-3/8 1-3/ /16 1-7/8 1-7/8 1-13/ / / /32 1-5/8 1-5/ /4 3/8 2-1/4 2-1/4 1-5/8 3-1/2 3-1/2 5-1/8 2-1/16 2-1/ /2 9/ / /32 1-7/8 3-29/ / /32 2-7/32 2-7/ /32 3-5/16 3-5/ / / /16 6-5/8 2-23/ / /2 11/16 4-5/32 4-5/32 2-7/ / /32 8-9/ / / /8 4-7/8 4-25/32 2-3/4 6-3/4 6-21/ / /4 5-7/8 5-7/8 3-9/ /32 7-7/8 11-5/16 5-1/32 5-1/ F 5 3-3/4 9-3/8 9-3/8 6-3/4 12-3/8 12-3/8 19-1/8 6-1/16 6-1/ / /32 8-3/16 4-3/ / / /8 7-9/16 7-9/ / / / / / / /16 9-3/4 9-3/ F 8 5-5/8 14-5/ /16 9-7/8 18-9/ / /16 9-1/4 9-1/ /2 16-7/ /32 7-1/2 22-1/ / / / / F / /4 17-1/ / /2 22-1/2 34-5/ /2 11-1/ / /8 16-7/32 8-3/4 22-7/ / / / / F / / / / / / /8 13-9/ / F / / / / / / /8 14-7/8 14-7/ F /4 24-3/4 24-3/4 16-3/4 32-3/4 32-3/4 49-1/ F / / / / / / /8 19-1/8 19-1/ F / / / / / / /4 21-3/ / F /8 25-3/ Outlet sized with bushing ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 110 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

63 REDUCI WYE Socket x Socket x Socket Pressure Rating 1/2" -2" F 2-1/2" -6" F 8" & Up F Part umber Size Approx. Wt. (bs.) /4x3/4x1/2 5/16 2-5/32 1-3/8 1-5/ /16 2-3/8 3-11/16 1-3/8 1-3/ x1x3/4 11/ /4 1-15/32 3-9/32 2-7/8 4-11/ / / /4x1-1/4x3/4 3/8 2-3/4 2-1/4 1-5/8 3-3/4 3-1/2 5-1/8 2-1/16 2-1/ /4x1-1/4x1 3/8 2-5/8 2-1/4 1-5/8 3-3/4 3-1/2 5-1/8 2-1/16 2-1/ /2x1-1/2x3/4 1/2 3-1/2 2-9/16 1-7/8 4-1/2 3-15/ / / / /2x1-1/2x1 1/ /16 1-7/8 4-5/ / / / / /2x1-1/2x1-1/4 1/2 3-1/4 2-9/16 1-7/8 4-1/2 3-15/ / / / x2x3/4 5/8 4-1/4 3-1/4 2-1/8 5-1/8 4-3/4 6-7/8 2-7/8 2-7/ x2x1 15/32 4-3/ / /8 4-7/8 6-7/8 2-7/8 2-7/ x2x1-1/2 19/32 3-7/16 3-7/32 2-1/8 4-7/8 4-3/4 6-7/8 2-7/8 2-7/ /2x2-1/2x /16 4-1/ /16 6-1/2 9-9/16 4-3/16 4-3/ x3x1 11/16 5-7/8 4-7/32 2-9/ /16 6-1/8 8-23/32 4-3/16 4-3/ x3x1-1/4 7/8 5-3/4 4-1/8 2-3/ /4 4-3/16 4-3/ x3x1-1/2 1-1/ / / / / / / x3x2 3/4 5-9/16 4-1/4 2-5/8 6-15/16 6-1/8 8-3/4 4-3/16 4-3/ x3x2-1/2 7/8 4-1/8 4-21/32 2-3/4 6-3/ /4 4-3/16 4-3/ x4x2-1/8 4-13/16 4-5/16 1-7/8 6-3/16 6-5/16 8-3/16 5-1/ / x4x3 5/8 5-5/16 5-1/8 2-5/8 7-7/32 7-1/8 9-3/4 5-1/ x6x2 1/16 8-5/8 6-5/ / /16 7-9/16 4-3/ x6x3 1/32 8-1/4 6-21/32 3-1/ /4 9-21/ /16 7-9/16 5-7/ x6x4 31/32 6-9/ / / / / /32 7-9/16 5-7/ F 6x6x4 2-9/ /16 9-3/ / / / /4 7-3/ F 8x8x2 9/16 9-3/4 9-3/ / /2 13-7/ /4 9-1/4 2-11/ F 8x8x3 1-5/ /8 9-15/16 5-9/ /8 14-3/ /4 9-1/4 3-15/ x8x4 11/16 9-1/8 8-3/16 3-5/ /8 12-3/ /2 9-23/32 5-1/ F 8x8x4 2-1/ / /16 6-5/ / / /4 9-1/ F 8x8x6 3-1/ / /8 7-3/4 16-1/ /8 24-1/8 9-1/4 7-3/ F 10x10x2 1/2 11-3/ /4 4-3/ / /2 20-1/4 11-1/2 2-11/ F 10x10x3 1/2 12-5/ /4 5-3/4 14-9/ /2 22-1/4 11-1/2 3-15/ F 10x10x4 1-7/ / / / / / /8 11-1/ x10x6-3/ / / / / Outlet sized with bushing Page 111 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

64 REDUCI WYE Socket x Socket x Socket Pressure Rating 1/2" -2" F 2-1/2" -6" F 8" & Up F Part umber Size Approx. Wt. (bs.) F 10x10x6 3-1/2 14-1/4 14-1/4 8-3/4 17-1/2 19-1/2 28-1/4 11-1/2 7-3/ x10x8 1-7/ /4 12-1/4 6-7/ / / /2 12-1/ / F 10x10x8 5-1/ / /8 10-3/ / /8 31-1/2 11-1/2 9-1/ F 12x12x2 1-1/8 12-9/ /8 5-1/8 14-5/ / / / F 12x12x3 3/ / /8 5-7/ / /8 24-1/2 13-9/ / F 12x12x4 3/ / /8 6-5/ / / / F 12x12x6 2-3/8 15-5/8 15-1/8 8-5/8 18-7/8 21-3/ /16 7-3/ F 12x12x8 3-7/8 17-1/ /8 10-1/8 21-5/ / /16 9-1/ F 12x12x10 5-3/8 18-1/8 18-1/8 11-5/8 23-3/8 24-3/ / / F 14x14x / / /8 2-11/ F 14x14x3 3/4 14-9/ /4 6-1/ / /4 26-1/2 14-7/8 3-15/ F 14x14x / / / F 14x14x6 1-1/2 16-1/2 15-1/2 8-1/2 19-3/4 22-1/ /8 7-3/ F 14x14x / / /8 9-1/ F 14x14x10 4-1/ /2 11-1/2 24-1/4 25-1/ /8 11-1/ F 14x14x / / /8 13-9/ F 16x16x / / / F 16x16x3 1-1/8 15-7/8 14-7/8 6-7/8 18-1/8 22-7/8 29-3/ / F 16x16x4 1/2 16-7/8 15-1/2 7-1/2 19-1/8 23-1/ F 16x16x6 1-7/ / /8 9-7/8 21-1/ /8 35-3/ / F 16x16x8 2-1/2 19-1/4 18-1/2 10-1/2 23-1/2 26-1/ / F 16x16x / / / F 16x16x12 5-1/2 22-1/4 21-1/2 13-1/2 28-1/2 29-1/ / F 16x16x14 6-3/8 22-1/2 22-3/8 14-3/8 29-1/2 30-3/8 44-3/ / F 18x18x6 7/8 19-1/8 18-7/8 9-7/8 22-3/8 27-7/8 37-3/4 19-1/8 7-3/ F 18x18x8 2-3/8 20-9/ /8 11-3/ / /8 40-3/4 19-1/8 9-1/ F 18x18x10 3-3/8 21-5/8 21-3/8 12-3/8 26-7/8 30-3/8 42-3/4 19-1/8 11-1/ F 18x18x12 4-7/8 23-9/ /8 13-7/ / /8 45-3/4 19-1/8 13-9/ F 18x18x14 5-3/ / /8 14-3/ / /8 46-3/4 19-1/8 14-7/ F 18x18x16 7-7/8 26-1/ /8 16-7/8 34-1/ /8 51-3/4 19-1/ F 20x20x6 1/8 20-1/2 19-7/8 9-7/8 23-3/4 29-7/8 39-3/4 21-3/16 7-3/ F 20x20x8 1-3/ / /8 11-3/8 26-3/ /8 42-3/4 21-3/16 9-1/ F 20x20x10 2-3/ /8 12-3/8 28-1/4 32-3/8 44-3/4 21-3/ / F 20x20x12 4-3/ / /8 14-3/8 31-3/ /8 48-3/4 21-3/ / F 20x20x14 4-7/8 25-3/ /8 14-7/8 32-3/ /8 49-3/4 21-3/ / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 112 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

65 REDUCI WYE Socket x Socket x Socket Pressure Rating 1/2" -2" F 2-1/2" -6" F 8" & Up F Part umber Size Approx. Wt. (bs.) F 20x20x16 6-3/8 27-7/ /8 16-3/8 35-7/ /8 52-3/4 21-3/ F 20x20x18 7-7/ / /8 17-7/ / /8 55-3/4 21-3/ / F 24x24x6 1-1/4 23-3/ /4 10-3/4 26-7/ /4 45-1/2 25-3/8 7-3/ F 24x24x8 1/4 24-5/8 24-1/4 12-1/4 28-7/8 36-1/4 48-1/2 25-3/8 9-1/ F 24x24x10 1-3/ / /8 13-3/ / /8 50-3/4 25-3/8 11-1/ F 24x24x12 3-1/4 27-5/8 27-1/4 15-1/4 33-7/8 39-1/4 54-1/2 25-3/8 13-9/ F 24x24x / / /8 14-7/ F 24x24x16 6-3/8 30-1/8 30-3/8 18-3/8 38-1/8 42-3/8 60-3/4 25-3/ F 24x24x18 7-7/8 31-1/2 31-7/8 19-7/8 40-1/2 43-7/8 63-3/4 25-3/8 19-1/ F 24x24x20 9-1/ /8 21-1/ /8 66-1/4 25-3/8 21-3/ DOUBE WYE Socket x Socket x Socket x Socket Pressure Rating F Part umber Size Approx. Wt. (bs.) F 2 3-5/ / / /16 7-1/16 7-1/ /4 2-3/4 2-3/ F 3 4-7/8 8-3/8 8-3/8 6-3/4 10-1/ / F 4 4-5/8 9-3/4 9-1/8 6-7/ / /8 18-1/ / F 6 4-7/8 11-1/2 11-1/2 8-1/8 14-3/4 14-3/4 22-7/8 7-3/16 7-3/ F 8 5-5/8 14-5/ /16 9-7/8 18-9/ / /16 9-1/4 9-1/ F / /4 17-1/ / /2 22-1/2 34-5/ /2 11-1/ F / / / / / / /8 13-9/ / F / / / / / / /8 14-7/8 14-7/ Page 113 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

66 REDUCI DOUBE WYE Socket x Socket x Socket x Socket Pressure Rating F Part umber Size Approx. Wt. (bs.) x2 7/32 4-1/4 4-1/32 2-3/32 5-3/4 5-29/ /16 2-7/ F 6x2 7/8 8-7/16 7-1/2 4-1/8 10-3/ /4 14-7/8 7-3/ / F 6x3 1-13/16 9-9/16 8-7/16 5-1/ / / /4 7-3/ / F 6x4 2-9/ /16 9-3/ / / / /4 7-3/ F 8x2 9/16 9-3/4 9-3/ / /2 13-7/ /4 9-1/4 2-11/ F 8x3 1-5/ /8 9-15/16 5-9/ /8 14-3/ /4 9-1/4 3-15/ F 8x4 2-1/ / /16 6-5/ / / /4 9-1/ F 8x6 3-1/ / /8 7-3/4 16-1/ /8 24-1/8 9-1/4 7-3/ F 10x2 1/2 11-3/ /4 4-3/ / /2 20-1/4 11-1/2 2-11/ F 10x3 1/2 12-5/ /4 5-3/4 14-9/ /2 22-1/4 11-1/2 3-15/ F 10x4 1-7/ / / / / / /8 11-1/ F 10x6 3-1/2 14-1/4 14-1/4 8-3/4 17-1/2 19-1/2 28-1/4 11-1/2 7-3/ F 10x8 5-1/ / /8 10-3/ / /8 31-1/2 11-1/2 9-1/ F 12x2 1-1/8 12-9/ /8 5-1/8 14-5/ / / / F 12x3 3/ / /8 5-7/ / /8 24-1/2 13-9/ / F 12x4 3/ / /8 6-5/ / / / F 12x6 2-3/8 15-5/8 15-1/8 8-5/8 18-7/8 21-3/ /16 7-3/ F 12x8 3-7/8 17-1/ /8 10-1/8 21-5/ / /16 9-1/ F 12x10 5-3/8 18-1/8 18-1/8 11-5/8 23-3/8 24-3/ / / F 16x6 1-7/ / /8 9-7/8 21-1/ /8 35-3/ / F 18x6 7/8 19-1/8 18-7/8 9-7/8 22-3/8 27-7/8 37-3/4 19-1/8 7-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 114 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

67 Schedule 40 Fittings & Accessories Technical Information Schedule 40 Unions Dimensions & Information UIO Socket x Socket w/o-ring Seal Pressure Rating F UT O.D. BUA- Part umber w/o-ring Seal EPD Size ut O.D. Approx. Wt. (bs.) /2 1-27/32 1-3/32 11/ / /4 2-3/16 1-5/16 11/ / /16 1-5/8 11/32 2-3/ /4 2-29/ /32 13/ / /2 3-1/32 2-1/4 3/8 3-3/ / /32 17/32 3-5/ /2 4-1/ /32 9/16 4-3/ / /16 5-3/ /8 5-1/32 19/32 6-3/ /8 7-9/32 13/16 8-7/ UIO Fipt x Fipt w/o-ring Seal Pressure Rating F UT O.D. Part umber w/o-ring Seal BUA- EPD Size ut O.D. Approx. Wt. (bs.) /2 1-25/32 1-3/32 5/ / /4 1-25/32 1-5/16 11/ / /8 1-5/8 11/32 2-3/ /4 2-1/4 1-31/32 13/ / /2 2-9/32 2-1/4 3/8 3-3/ /2 2-23/32 1/2 3-5/ /2 3-5/ /32 9/16 4-3/ /32 4 5/8 5-3/ /16 5-1/32 5/8 6-3/ /32 7-1/4 1-1/2 8-7/ Page 115 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

68 Schedule 40 Unions Dimensions & Information TRASITIO UIO Socket x Fipt w/etal Thread Insert and O-ring Seal Pressure Rating F UT O.D. BUA- Part umber w/o-ring Seal EPD Size ut O.D. Approx. Wt. (bs.) BR BR /16 1-7/8 1-1/32 2-7/ BR BR 1-1/4 3-9/32 2-7/32 1-1/16 3-5/ BR BR 1-1/2 3-1/2 2-9/16 1-3/ / BR BR 2 3-5/8 2-7/8 1-1/4 4-5/ ot intended to convey or dispense water for human consumption through drinking or cooking SPECIA REIFORCED UIO Socket x SR Fipt w/o-ring Seal Pressure Rating F UT O.D. BUA- Part umber w/o-ring Seal EPD Size ut O.D. Approx. Wt. (bs.) SR SR 1/4 2-1/8 7/8 29/ / SR SR 3/8 2-5/ / SR SR 1/2 2-9/32 1-9/32 21/ / SR SR 3/4 2-19/ /32 27/32 2-1/ SR SR / /16 7/8 2-7/ SR SR 1-1/4 3-7/32 2-1/16 31/32 3-5/ SR SR 1-1/2 3-7/16 2-9/16 1-1/16 3-9/ SR SR 2 4-1/ /16 4-5/ SR SR 3 5-9/32 4-5/ / / SR SR /16 5-1/4 2-1/8 5-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 116 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

69 Schedule 40 Saddles Dimensions & Information SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections may be accomplished without saddle straps, Spears anufacturing Company recommends the use of clamp or strap device during the assembly step to ensure good compression between the pipe and fitting surfaces as the solvent cures. Solvent cemented saddles are non pressure rated. For additional information, contact Spears Technical Service. ARE DIAETER PR SADDE ISTAATIO Spears arge Diameter on-pressure Rated (PR) Saddles are designed for use with PVC pipe in open ended, drainage applications. A supplemental clamping strap must be used to eliminate gaps and insure good compression and proper fit between the pipe and the saddle surfaces as the solvent cement cures. Clamping straps/kits are commercially available and are not included with saddle. Proper installation requires adequate application of solvent cement and immediate clamping in position with the clamping straps. Additional Items eeded arking Pen 60-rit Sandpaper arge Roller Applicator 1/2" Wrench Primer (Spears Primer-68/Primer-70) Clamping Straps ole Saw Solvent Cement (Spears PVC-19) Power Drill Primer & Cement Use Containers Step 1: Dry-fit Saddle, ark ocation of Saddle and ole, Prepare Clamping Straps Check for adequate clearance of saddle and that clamping straps can be installed. Position saddle on pipe aligning branch and desired hole centers. ark outline of saddle, branch hole and center. Prepare two (2) clamping straps of appropriate length (one strap will be used on each side of branch). Step 2: Cut ole in Pipe Remove saddle; verify system is drained. Drill hole at marked center location using appropriate size hole saw. Step 3: Sand Pipe and Saddle Contact Areas with 60-rit Sandpaper Thoroughly rough up the marked outline area on the pipe and on the underside of the saddle using 60-grit sandpaper. Sand in direction of pipe (parallel), then crosswise of pipe (perpendicular) until rough and all gloss is removed. ive attention to area around the branch on both pipe and saddle. Step 4: Apply Primer to Pipe and Saddle Work several coats into the roughened pipe area and underside of saddle, giving attention to the area around the branch on both. Primer until the surfaces are softened using a large roller applicator. Step 5: Apply a iberal Quantity of Cement to Pipe and Saddle Apply several coats (minimum 3) one after the other to build up cement on pipe and saddle contact areas. Avoid removing previous coat with each application. DO OT allow cement to dry out between coats. Again, give attention to area around the branch on both pipe and saddle. For threaded saddles, avoid runs or drips in the branch fitting threads. Step 6: Immediately Install Saddle and Tighten Clamping Straps Position saddle and locate clamping straps midway between branch and end on each side of branch. This should be done immediately while cement is still wet. Avoid excessive movement that might dislocate proper positioning (assistance is recommended). Tighten straps tight to firmly press saddle onto pipe. A thick glue-bead should be forced out around the saddle edges and inside the branch joint. If no bead, quickly remove saddle and apply more cement. Step 7: Allow Cement Joint to Cure Cure for same time and conditions as required for standard solvent cement pipe joints of the same size in the system. Snap-On Saddle Installation Instructions The surface to be joined must be wiped clean. Using an appropriate applicator, apply a coat of primer to the fitting and pipe. While the primer is still wet, apply a generous coat of medium bodied cement first to the pipe, then to the fitting and then to the pipe again, covering an area of the pipe slightly larger than the saddle. Without delay, push the saddle onto the pipe and rotate the fitting approximately 15 in each direction to evenly distribute the cement. Allow cement to cure. Drill fitting and pipe with the recommended size hole saw. Remove debris from the line. Follow all safe handling precautions. Solvent cemented saddles are non pressure rated. For additional information, contact Spears Technical Service. Page 117 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

70 Schedule 40 Saddles Dimensions & Information SADDE (IPS O.D. x Socket) on-pressure Rated. Contact Spears Technical Services for additional information Part umber Size Approx. Wt. (bs.) /2x3/4 2-9/16 5-5/ /32 1/ x1/2 3-19/ /32 2-3/8 1-5/ x1 3-5/8 6-11/32 2-3/8 7/ x1-1/4 3-21/32 6-5/16 2-3/8 21/ x1-1/2 3-5/16 6-3/8 2-3/8 5/ x /16 2-3/4 1-7/ x1/2 4-1/8 6-5/16 2-3/8 1-1/ x1 4-7/32 6-5/16 2-3/8 13/ x1-1/4 4-3/16 6-1/4 2-3/8 11/ x1-1/2 3-3/4 6-1/4 2-13/32 1/ x2 5-1/2 6-1/4 2-3/4 1-13/ x1-1/2 5-3/8 7-1/8 2-25/32 1-5/ x /8 2-3/4 9/ x1/2 4-5/ /32 2-3/8 1-1/ x1 5-11/32 6-3/8 2-7/8 7/ x1-1/4 5-3/8 6-5/16 2-3/8 3/ x1-1/2 4-15/16 6-5/ /32 5/ x2 6-9/16 6-5/16 2-3/4 1-7/ x3 5-15/ /16 5-1/16 5/ x4 5-1/ /16 5 1/ x1/2 6-9/ /32 2-3/8 1-1/ x1 3-3/8 6-11/32 2-3/8 1-7/ x1-1/4 3-21/ /32 2-3/ x1-1/2 6-7/32 6-5/16 2-3/8 19/ x2 7-11/16 6-5/16 2-3/ x /8 5 3/ x4 5-9/ /16 5-1/32 7/ x4 7-5/8 11-7/8 5 5/ Outlet sized with bushing SADDE (IPS O.D. x Fipt) on-pressure Rated. Contact Spears Technical Services for additional information Part umber Size Approx. Wt. (bs.) /2x1/ /8 9/16 1/ /4x1/8 1-1/8 2-1/8 9/16 5/ /2x3/4 2-9/16 5-9/ /32 5/ x1-1/2 3-9/32 6-5/16 2-3/8 13/ x1-1/2 3-3/4 6-1/4 2-3/8 7/ x2 4-15/16 7-1/16 2-3/4 1-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 118 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

71 Schedule 40 Saddles Dimensions & Information SADDE (IPS O.D. x Fipt) on-pressure Rated. Contact Spears Technical Services for additional information Part umber Size Approx. Wt. (bs.) x1-1/2 4-15/16 6-5/16 2-3/8 3/ x4 5-9/ /16 5 9/ x1-1/2 6-7/32 6-5/16 2-3/8 19/ x4 6-1/4 11-7/8 5 1/ x4 7-5/ /8 5 1/ SAP-O SADDE (IPS O.D. x Socket) on-pressure Rated. Contact Spears Technical Services for additional information Part umber Size Approx. Wt. (bs.) /2x1/2 1-11/32 2-1/2 1-3/32 5/ /4x3/4 1-3/4 3-1/8 1-5/16 7/ x1 1-29/32 3-5/8 1-5/8 1/ /4x1-1/4 2-1/4 4-1/4 2 11/ /2x1-1/2 2-13/32 4-7/16 2-7/32 3/ x2 2-23/32 5-1/4 2-11/16 7/ /4x1/2 1-11/32 2-3/4 1-3/32 7/ x1/2 1-13/32 3-1/2 1-3/32 1-3/16.09 SAP-O SADDE (IPS O.D. x Fipt) on-pressure Rated. Contact Spears Technical Services for additional information. Part umber Size Approx. Wt. (bs.) /2x1/2 1-3/8 2-1/2 1-1/16 3/ /4x3/4 1-3/4 3-5/32 1-5/16 13/ x1 1-15/16 3-5/8 1-5/8 1/ /4x1/2 1-7/16 2-3/8 1-3/32 3/ x1/2 1-19/32 3-1/2 1-1/16 5/ x3/4 1-7/ /4 3/ /2x3/4 1-15/ /32 1-5/16 5/32.15 Page 119 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

72 Schedule 40 Saddles Dimensions & Information CAP-O SADDES Simple Two-Piece Design Engineered for Reliability Spears PVC & CPVC Clamp-On Saddles allow quick, easy and reliable addition of branch lines to existing piping system lines. These versatile saddle units can be used in either temporary or permanent installations on all types of pipe with IPS (Iron Pipe size) outside diameter, such as PVC, CPVC, Polyethylene, Polypropylene and Steel. Excellent etal-to-plastic System Transition Easily installs on metal pipe as a transition to plastic system. PVC & CPVC Tee or Cross Con gurations Available in PVC White, PVC ray or CPVC in 2" - 12" IPS pipe saddle with socket outlets in sizes 1/2" - 6" and Special Reinforced (SR) threaded outlets in sizes 1/2" - 6", single Tee or double Cross con gurations. Patented SR Design Female Threads Patented Special Reinforced (SR) design on female thread outlets for superior strength. O-ring Options Choice of high grade Buna- or EPD O-rings for Schedule 40 and EPD or FK O-rings for Schedule 80, for application speci c selection for optimum chemical resistance. ulti-bolt Design, Choice of ardware Positive attachment eliminates splitting problems associated with plastic wedge fasteners and outperforms 2-Bolt clamp saddle designs. Choose zinc plated or stainless steel nut, bolt and washer hardware. Excellent Pressure Capabilities aximum internal pressure rating of 235 psi through 4", 200 psi for 6", and 150 psi for 8" - 12" at 73 F. Sample Engineering Speci cation All thermoplastic saddles shall be clamp-on type with O-ring seal constructed from PVC Type I cell classi cation or CPVC Type IV cell classi cation All O-rings shall be Buna-, EPD or FK. All saddles shall be piloted at O-ring area for positive positioning in pipe. All bolt clamping hardware shall be zinc plated steel or stainless steel. All threaded saddle outlets shall be Special Reinforced (SR) design. Saddles shall be pressure rated at 235 psi for use on pipe sizes through 4" nominal IPS diameters, 200 psi for use on 6" pipe, and 150 psi for use on 8" - 12" pipe, maximum internal pressure for water at 73 F, as manufactured by Spears anufacturing Company. ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 120 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

73 Schedule 40 Saddles Dimensions & Information Spears Two-Piece Clamp-On Saddle Design Clamps onto Pipe for Quick and Easy Installation Clamp-On Saddle Installation Instructions 1. Using a standard industrial grade hole-saw, cut specified hole in desired position on pipe according to recommended hole saw size engraved on the saddle. ote: Care must be taken to deburr hole and remove all residue from hole area to assure tight fit and avoid leakage. 2. Fully seat O-ring in groove on underside of saddle outlet component. Position over hole and fully seat saddle onto pipe. ote: Certain saddle outlets are piloted. Be sure pilot lip fully engages with hole in pipe. 3 Place strap component opposite outlet and secure with bolts (4), nuts (4) and washers (8). Important: Washers UST be placed under each bolt head (1) and under each nut (1) to avoid damage to saddle. 4. Tighten bolts to specified torque. Drill Pilot ole before using ole Saw. Saddle Size & up Recommended Bolt-Torque - ft/lb For Double Outlet Saddle Installation Determine second outlet hole position as shown O-ring seal provides positive, trouble-free sealing to pipe. CAP-O SADDE PIOT O-RI PIPE a a Special pilot engages with hole in pipe to prevent saddle dislocation. a 1/2 a-a a Saddle x Outlet Size Recommended ole Size Recommended Bolt Torque ft./lbs. 2 x 1/2 3/4 8 2 x 3/4 7/8 8 2 x 1 1-1/8 8 2 x 1-1/4 1-1/2 8 2 x 1-1/2 1-1/ /2 x 1-1/2 1-3/4 8 3 x 1/2 1 7/8 8 3 x 3/4 7/8 8 3 x 1 1-1/8 8 3 x 1-1/ /4 8 3 x 1-1/ /4 8 3 x 2 2-1/4 8 4 x 1/ /8 8 4 x 3/ /8 8 4 x 1 1-1/8 8 4 x 1-1/ /4 8 4 x 1-1/2 1-3/4 8 4 x 2 2-1/4 8 4 x 2-1/ x x 1/ / x 3/ /8 10 Saddle x Outlet Size Recommended ole Size Recommended Bolt Torque ft./lb.s 6 x 1 1-1/ x 1-1/ / x 1-1/ / x 2 2-1/ x 2-1/ x x x 1/ x 3/ x x 1-1/ x 1-1/ x x 2-1/ x x x x x x x : Outlet-Sized with Bushing Page 121 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

74 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SOCKET SIE OUTET Dimensions Also Applicable to 466S-XXX 466E-XXX 466SE-XXX Pressure Rating 2" - 4" F 6" F 8" - 12" F 1 1 Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) x1/2 2-3/8 1-1/2 2-7/16 3-7/16 1-3/16 5/16 3/ x3/4 2-1/2 1-1/2 2-7/16 3-7/16 1-3/8 5/16 7/ x1 2-5/8 1-1/2 2-7/16 3-7/ /16 5/16 1-1/ x1-1/4 2-3/4 1-1/2 2-7/16 3-7/16 2-1/16 5/16 1-1/ x1-1/2 2-15/16 1-1/2 2-7/16 3-7/16 2-3/8 3/8 1-1/ /2x1-1/2 3-3/ /16 4-1/ /8 3/8 1-3/ x1/2 3-5/16 2-1/ /8 1-3/8 13/16 7/ x3/4 3-1/16 2-1/ /8 1-3/8 9/32 7/ x1 3-3/16 2-1/ /8 1-11/16 5/16 1-1/ x1-1/4 4-1/32 2-1/16 4-3/32 4-5/ /32 2-1/ x1-1/2 4-1/32 2-1/16 4-3/32 4-5/8 3 29/32 2-1/ x2 3-5/8 2-1/16 4-3/32 4-5/8 3 3/8 2-1/ x1/2 4-3/32 2-5/ /16 2-3/8 31/32 1-1/ x3/4 4-3/32 2-5/ /16 2-3/8 27/32 1-1/ x1 3-13/16 2-5/ /8 1-11/16 7/16 1-1/ x1-1/4 4-13/32 2-5/8 4-3/32 5-5/8 2-3/8 29/32 1-3/ x1-1/2 4-1/8 2-5/8 4-3/32 5-9/16 2-3/8 1/2 1-3/ x2 4-3/16 2-5/8 4-1/8 5-5/8 3 7/16 2-1/ x2-1/ /8 5-7/ /32 4-9/32 3/ x3 4-5/8 2-19/32 5-7/ /16 4-1/4 1/ x1/2 5-13/32 3-7/ /4 1-11/16 1-7/32 1-1/ x3/4 5-7/16 3-7/ /4 1-11/16 1-1/8 1-1/ x1 5-1/8 3-7/ / /16 11/16 1-1/ x1-1/4 5-15/16 3-7/8 4-1/8 7-3/ /8 2-1/ x1-1/2 5-23/32 3-7/8 4-1/8 7-31/ /32 2-1/ x2 5-1/2 3-7/8 4-1/8 7-3/4 3 11/16 2-1/ Outlet sized with bushing ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 122 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

75 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SOCKET SIE OUTET Dimensions Also Applicable to 466S-XXX 466E-XXX 466SE-XXX Pressure Rating 2" - 4" F 6" F 8" - 12" F 1 1 Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) x2-1/2 6-7/16 3-7/ /16 4-1/4 1-1/ x3 5-15/16 3-7/ /16 4-1/4 25/ x / /16 5-3/16 5/ x1/2 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ x3/4 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ x1 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-5/ x1-1/4 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-1/ x1-1/2 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ x2 7-11/16 4-7/8 8-1/2 10-1/8 5-1/4 1-7/ x2-1/2 8-1/8 4-7/8 8-1/2 10-1/8 5-1/4 1-11/ x3 7-11/16 4-7/8 8-1/2 10-1/8 5-1/4 1-7/ x4 7-5/16 4-7/8 8-1/2 10-1/8 5-1/4 11/ x6 8-3/32 4-7/8 8-1/2 10-1/8 7-5/8 11/ x1-1/2 8-7/8 6-1/8 8-1/2 11-7/8 5-1/4 3-1/ x4 8-15/32 6-1/32 8-1/2 12-5/16 5-1/4 13/ x6 9-1/ / /8 1-1/ x4 9-9/16 7-5/32 8-1/2 14-5/16 5-1/4 7/ x6 10-3/8 7-5/32 8-1/2 14-5/16 7-5/8 7/ Outlet sized with bushing 1) Clamp-On Saddle Standard ardware: Zinc Bolts w/bua- O-ring Seal e.g.) Part umber = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Zinc Bolts. 2) Clamp-On Saddles w/stainless Steel (SS) Bolts,Add The etter S Before The Dash. e.g.) Part umber 466S-247 = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Stainless Steel Bolts. 3) Clamp-On Saddles Standard ardware: Zinc Bolts w/epd O-ring Seal, Add The etter E Before The Dash. e.g.) Part umber 466E-247 = 2x1/2 PVC Clamp-On Saddle, Socket, EPD O-ring, Zinc Bolts. 4) Clamp-On Saddles w/stainless Steel Bolts & EPD O-ring Seal, Add The etter SE Before The Dash. e.g.) Part umber 466SE-247 = 2x1/2 PVC Clamp On Saddle, Socket EPD O-ring, Stainless Steel Bolts. Page 123 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

76 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SR FIPT SIE OUTET Dimensions Also Applicable to Pressure Rating 467S-XXXSR 467E-XXXSR 467SE-XXXSR 2" - 4" F 6" F 8" - 12" F 1 1 Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) SR 2x1/2 2-3/8 1-1/2 2-7/16 3-7/16 1-3/16 5/16 3/ SR 2x3/4 2-1/2 1-1/2 2-7/16 3-7/16 1-3/8 5/8 7/ SR 2x1 2-5/8 1-1/2 2-7/16 3-7/ /16 9/16 1-1/ SR 2x1-1/4 2-3/4 1-1/2 2-7/16 3-7/16 2-1/16 11/16 1-1/ SR 2x1-1/2 2-15/16 1-1/2 2-7/16 3-7/16 2-3/8 3/4 1-1/ SR 2-1/2x1-1/2 3-3/ /16 4-1/ /8 13/16 1-3/ SR 3x1/2 3-5/16 2-1/ /8 1-3/8 15/16 7/ SR 3x3/4 3-1/16 2-1/ /8 1-3/8 9/16 7/ SR 3x1 3-3/16 2-1/ /8 1-11/16 9/16 1-1/ SR 3x1-1/4 4-1/32 2-1/16 4-3/32 4-5/ /16 2-1/ SR 3x1-1/2 4-1/32 2-1/16 4-3/32 4-5/ /16 2-1/ SR 3X2 3-5/8 2-1/16 4-3/32 4-5/8 3 7/8 2-1/ SR 4x1/2 4-3/32 2-5/ /16 2-3/8 1-1/8 1-1/ SR 4x3/4 4-3/32 2-5/ /16 2-3/8 1-1/8 1-1/ SR 4x1 3-13/16 2-5/ /8 1-11/16 11/16 1-1/ SR 4x1-1/4 4-13/32 2-5/8 4-3/32 5-5/8 2-3/8 1-7/32 1-3/ SR 4x1-1/2 4-1/8 2-5/8 4-3/32 5-9/16 2-3/8 15/16 1-3/ SR 4x2 4-3/16 2-5/8 4-1/8 5-5/8 3 15/16 2-1/ SR 4x2-1/ /8 5-7/ /32 4-9/32 1-7/ SR 4x3 4-5/8 2-19/32 5-7/ /16 4-1/4 31/ SR 6x1/2 5-13/32 3-7/ /4 1-11/16 1-3/8 1-1/ SR 6x3/4 5-7/16 3-7/ /4 1-11/16 1-3/8 1-1/ SR 6x1 5-1/8 3-7/ / /16 15/16 1-1/ SR 6x1-1/4 5-15/16 3-7/8 4-1/8 7-3/ /16 2-1/ SR 6x1-1/2 5-15/16 3-7/8 4-1/8 7-3/ /4 2-1/ SR 6x2 5-1/2 3-7/8 4-1/8 7-3/ /32 2-1/ SR 6x2-1/2 6-7/16 3-7/ /16 4-1/4 1-9/ SR 6x3 5-15/16 3-7/ /16 4-1/4 1-1/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 124 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

77 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SR FIPT SIE OUTET Dimensions Also Applicable to Pressure Rating 467S-XXXSR 467E-XXXSR 467SE-XXXSR 2" - 4" F 6" F 8" - 12" F 1 1 Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) SR 6x / /16 5-3/16 1-3/ SR 8x1/2 8-3/32 4-7/8 8-1/2 10-1/8 5-1/ SR 8x3/4 8-3/32 4-7/8 8-1/2 10-1/8 5-1/ SR 8x1 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-13/ SR 8x1-1/4 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ SR 8x1-1/2 8-3/32 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ SR 8x2 7-11/16 4-7/8 8-1/2 10-1/8 5-1/4 2-3/ SR 8x2-1/2 8-1/8 4-7/8 8-1/2 10-1/8 5-1/4 2-1/ SR 8x3 7-11/16 4-7/8 8-1/2 10-1/8 5-1/4 1-15/ SR 8x4 7-5/16 4-7/8 8-1/2 10-1/8 5-1/4 1-1/ SR 8x6 8-3/32 4-7/8 8-1/2 10-1/8 7-5/8 2-3/ SR 10x4 8-15/32 6-1/32 8-1/2 12-5/16 5-1/4 2-3/ SR 10x6 9-9/32 6-1/32 8-1/2 12-5/16 7-5/8 3-3/ SR 12x4 9-9/16 7-5/32 8-1/2 14-5/16 5-1/4 1-5/ SR 12x6 10-3/8 7-5/32 8-1/2 14-5/16 7-5/8 2-1/ ) Clamp-On Saddle Standard ardware: Zinc Bolts w/bua- O-ring Seal e.g.) Part umber SR = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Zinc Bolts. 2) Clamp-On Saddles w/stainless Steel (SS) Bolts,Add The etter S Before The Dash. e.g.) Part umber 467S-247SR = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Stainless Steel Bolts. 3) Clamp-On Saddles Standard ardware: Zinc Bolts w/epd O-ring Seal, Add The etter E Before The Dash. e.g.) Part umber 467E-247SR = 2x1/2 PVC Clamp-On Saddle, Socket, EPD O-ring, Zinc Bolts. 4) Clamp-On Saddles w/stainless Steel Bolts & EPD O-ring Seal, Add The etter SE Before The Dash. e.g.) Part umber 467SE-247SR = 2x1/2 PVC Clamp On Saddle, Socket EPD O-ring, Stainless Steel Bolts. Page 125 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

78 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SOCKET DOUBE OUTET Dimensions Also Applicable to Pressure Rating 468S-Xxx 468E-Xxx 468SE-Xxx 2" - 4" F 6" F 8" - 12" F 1 Part umber Size 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) x1/2 2-3/8 2-7/16 3-7/16 1-3/16 5/16 3/ x3/4 2-1/2 2-7/16 3-7/16 1-3/8 5/16 7/ x1 2-5/8 2-7/16 3-7/ /16 5/16 1-1/ x1-1/4 2-3/4 2-7/16 3-7/16 2-1/16 5/16 1-1/ x1-1/2 2-15/16 2-7/16 3-7/16 2-3/8 3/8 1-1/ /2x1-1/2 3-3/16 4-1/ /8 3/8 1-3/ x1/2 3-5/ /8 1-3/8 13/16 7/ x3/4 3-1/ /8 1-3/8 9/32 7/ x1 3-3/ /8 1-11/16 5/16 1-1/ x1-1/4 4-1/32 4-3/32 4-5/ /32 2-1/ x1-1/2 4-1/32 4-3/32 4-5/8 3 29/32 2-1/ x2 3-5/8 4-3/32 4-5/8 3 3/8 2-1/ x1/2 4-3/ /16 2-3/8 31/32 1-1/ x3/4 4-3/ /16 2-3/8 27/32 1-1/ x1 3-13/ /8 1-11/16 7/16 1-1/ x1-1/4 4-13/32 4-3/32 5-5/8 2-3/8 29/32 1-3/ x1-1/2 4-1/8 4-3/32 5-9/16 2-3/8 1/2 1-3/ x2 4-3/16 4-1/8 5-5/8 3 7/16 2-1/ x2-1/ / /32 4-9/32 3/ x3 4-5/8 5-7/ /16 4-1/4 1/ x1/2 5-13/ /4 1-11/16 1-7/32 1-1/ x3/4 5-7/ /4 1-11/16 1-1/8 1-1/ x1 5-1/ / /16 11/16 1-1/ x1-1/4 5-15/16 4-1/8 7-3/ /8 2-1/ x1-1/2 5-15/16 4-1/8 7-3/ /4 2-1/ x2 5-1/2 4-1/8 7-3/4 3 11/16 2-1/ x2-1/2 6-7/ /16 4-1/4 1-1/ x3 5-15/ /16 4-1/4 25/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 126 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

79 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SOCKET DOUBE OUTET Dimensions Also Applicable to Pressure Rating 468S-Xxx 468E-Xxx 468SE-Xxx 2" - 4" F 6" F 8" - 12" F 1 Part umber Size 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) x /16 5-3/16 5/ x1/2 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ x3/4 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ x1 8-3/32 8-1/2 10-1/8 5-1/4 2-5/ x1-1/4 8-3/32 8-1/2 10-1/8 5-1/4 2-1/ x1-1/2 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ x2 7-11/16 8-1/2 10-1/8 5-1/4 1-7/ x2-1/2 8-1/8 8-1/2 10-1/8 5-1/4 1-11/ x3 7-11/16 8-1/2 10-1/8 5-1/4 1-7/ x4 7-5/16 8-1/2 10-1/8 5-1/4 11/ x6 8-3/32 8-1/2 10-1/8 7-5/8 11/ x4 8-15/32 8-1/2 12-5/16 5-1/4 13/ x6 9-9/32 8-1/2 12-5/16 7-5/8 13/ x4 9-9/16 8-1/2 14-5/16 5-1/4 7/ x6 10-3/8 8-1/2 14-5/16 7-5/8 7/ ) Clamp-On Saddle Standard ardware: Zinc Bolts w/bua- O-ring Seal e.g.) Part umber = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Zinc Bolts. 2) Clamp-On Saddles w/stainless Steel (SS) Bolts,Add The etter S Before The Dash. e.g.) Part umber 468S-247 = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Stainless Steel Bolts. 3) Clamp-On Saddles Standard ardware: Zinc Bolts w/epd O-ring Seal, Add The etter E Before The Dash. e.g.) Part umber 468E-247 = 2x1/2 PVC Clamp-On Saddle, Socket, EPD O-ring, Zinc Bolts. 4) Clamp-On Saddles w/stainless Steel Bolts & EPD O-ring Seal, Add The etter SE Before The Dash. e.g.) Part umber 468SE-247 = 2x1/2 PVC Clamp On Saddle, Socket EPD O-ring, Stainless Steel Bolt Page 127 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

80 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SR FIPT DOUBE OUTET Dimensions Also Applicable to Pressure Rating 469S-XXXSR 469E-XXXSR 469SE-XXXSR 2" - 4" F 6" F 8" - 12" F Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) SR 2x1/2 2-3/8 2-7/16 3-7/16 1-3/16 5/16 3/ SR 2x3/4 2-1/2 2-7/16 3-7/16 1-3/8 5/16 7/ SR 2x1 2-5/8 2-7/16 3-7/ /16 5/16 1-1/ SR 2x1-1/4 2-3/4 2-7/16 3-7/16 2-1/16 5/16 1-1/ SR 2x1-1/2 2-15/16 2-7/16 3-7/16 2-3/8 3/8 1-1/ SR 2-1/2x1-1/2 3-3/16 4-1/ /8 3/8 1-3/ SR 3x1/2 3-5/ /8 1-3/8 13/16 7/ SR 3x3/4 3-1/ /8 1-3/8 9/32 7/ SR 3x1 3-3/ /8 1-11/16 5/16 1-1/ SR 3x1-1/4 4-1/32 4-3/32 4-5/ /32 2-1/ SR 3x1-1/2 4-1/32 4-3/32 4-5/ /16 2-1/ SR 3x2 3-5/8 4-3/32 4-5/8 3 3/8 2-1/ SR 4x1/2 4-3/ /16 2-3/8 31/32 1-1/ SR 4x3/4 4-3/ /16 2-3/8 27/32 1-1/ SR 4x1 3-13/ /8 1-11/16 7/16 1-1/ SR 4x1-1/4 4-13/32 4-3/32 5-5/8 2-3/8 29/32 1-3/ SR 4x1-1/2 4-1/8 4-3/32 5-9/16 2-3/8 1/2 1-3/ SR 4x2 4-3/16 4-1/8 5-5/8 3 7/16 2-1/ SR 4x2-1/ / /32 4-9/32 3/ SR 4x3 4-5/8 5-7/ /16 4-1/4 1/ SR 6x1/2 5-13/ /4 1-11/16 1-7/32 1-1/ SR 6x3/4 5-7/ /4 1-11/16 1-1/8 1-1/ SR 6x1 5-1/ / /16 11/16 1-1/ SR 6x1-1/4 5-15/16 4-1/8 7-3/ /8 2-1/ SR 6x1-1/2 5-15/16 4-1/8 7-3/ /4 2-1/ SR 6x2 5-1/2 4-1/8 7-3/4 3 11/16 2-1/ SR 6x2-1/2 6-7/ /16 4-1/4 1-1/ SR 6x3 5-15/ /16 4-1/4 25/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 128 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

81 Schedule 40 Saddles Dimensions & Information CAP-O SADDE x SR FIPT DOUBE OUTET Dimensions Also Applicable to Pressure Rating 469S-XXXSR 469E-XXXSR 469SE-XXXSR 2" - 4" F 6" F 8" - 12" F Part umber Size 1 1 ole Size Bolt Torque ft./lbs. Approx. Wt. (bs.) SR 6x /16 5-3/16 5/ SR 8x1/2 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ SR 8x3/4 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ SR 8x1 8-3/32 8-1/2 10-1/8 5-1/4 2-5/ SR 8x1-1/4 8-3/32 8-1/2 10-1/8 5-1/4 2-1/ SR 8x1-1/2 8-3/32 8-1/2 10-1/8 5-1/4 2-3/ SR 8x2 7-11/16 8-1/2 10-1/8 5-1/4 1-7/ SR 8x2-1/2 8-1/8 8-1/2 10-1/8 5-1/4 1-11/ SR 8x3 7-11/16 8-1/2 10-1/8 5-1/4 1-7/ SR 8x4 7-5/16 8-1/2 10-1/8 5-1/4 11/ SR 8x6 8-3/32 8-1/2 10-1/8 7-5/8 11/ SR 10x4 8-15/32 8-1/2 12-5/16 5-1/4 13/ SR 10x6 9-9/32 8-1/2 12-5/16 7-5/8 13/ SR 12x4 9-9/16 8-1/2 14-5/16 5-1/4 7/ SR 12x6 10-3/8 8-1/2 14-5/16 7-5/8 7/ ) Clamp-On Saddle Standard ardware: Zinc Bolts w/bua- O-ring Seal e.g.) Part umber SR = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Zinc Bolts. 2) Clamp-On Saddles w/stainless Steel (SS) Bolts,Add The etter S Before The Dash. e.g.) Part umber 469S-247SR = 2x1/2 PVC Clamp On Saddle, Socket, BUA- O-ring, Stainless Steel Bolts. 3) Clamp-On Saddles Standard ardware: Zinc Bolts w/epd O-ring Seal, Add The etter E Before The Dash. e.g.) Part umber 469E-247SR = 2x1/2 PVC Clamp-On Saddle, Socket, EPD O-ring, Zinc Bolts. 4) Clamp-On Saddles w/stainless Steel Bolts & EPD O-ring Seal, Add The etter SE Before The Dash. e.g.) Part umber 469SE-247SR = 2x1/2 PVC Clamp On Saddle, Socket EPD O-ring, Stainless Steel Bolt Page 129 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

82 Schedule 40 Tank Adapters Dimensions & Information TAK ADAPTER WIT EPD ASKET Socket (ale Pipe Thread) Pressure Rating F 1 R 1 Part umber Size 1 1 R 4170E-005 1/2 2-5/16 1-1/2 2-3/16 1-7/16 3/4 9/16 1/ E-007 3/4 2-3/8 1-1/2 2-1/2 1-13/16 9/16 9/16 3/4 1-1/4 4170E /8 1-1/2 2-3/4 2-1/16 1/2 9/ /2 4170E /4 2-3/8 1-9/16 3-3/16 2-1/2 5/16 9/16 1-1/ E /2 2-3/8 1-9/16 3-3/16 2-1/2 1/4 9/16 1-1/ E /4 2-3/8 3-13/16 3-1/16 1 5/ /2 4170E /2 3-1/2 2-9/16 4-1/2 3-11/16 13/16 5/8 2-1/2 3 Socket Outlet Thread IPT Tank Adapter Size Tank Adapter ole Size Requirements Recommended inimum ole Size inimum Inside Curvature Radius (inches) aximum Tank Wall Thickness (inches) 1/2 1-1/ /4 1-7/ / /4 2-1/ /2 2-1/ / /2 3-3/ ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 130 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

83 ot-tap Saddles Dimensions & Information Allows Connection to Existing Pipelines Under Pressure Specially designed tapping saddle allows pipe branch connection to pressurized ot lines without system shut-down. Available in PVC White, ray or CPVC ray configurations. Industrial rade Bolt-on Saddle with EPD or FK O-ring Seals and Choice of Zinc Plated Steel or Type 316 Stainless Steel ardware. Built-in Brass or Stainless Steel Cutter Easily Cuts ole in PVC, CPVC, DPE and PP Pipe. Special Design Captures and Retains Coupon from ole. Pressure Rated to F. Available to fit IPS Pipe 2" through 8" with Versatile 3/4" Socket - 1" Spigot Combination Branch Outlet or 1"-1/2" Socket - 2" Spigot Combination Branch Outlet TECICA DATA aximum Service Temperatures PVC 140 F CPVC 200 F ote: Elevated service temperatures require system pressure de-rating. Pressure 73 F 2" 4" 235 psi 6" 200 psi 8" 150 psi 1 1 IPS Spigot O.D. Socket I.D. ot for Distribution of Compressed Air or as Some leakage is possible during the tapping process, therefore hot-taps are not recommended for corrosive or dangerous fluid medium. 2 1 Dimensions - Saddle x Socket (Spigot) Size x 3/4 (1) 3-9/ / /2 2-7/16 3-1/2 2 2 x 1-1/2 (2) 4-9/16 1-1/4 8-15/ /16 1-1/2 2-7/16 3-1/2 2-7/8 2-1/2 x 3/4 (1) 3-15/ / /4 4-1/8 4-1/ /2 x 1-1/2 (2) 4-13/16 1-1/4 9-3/ /16 1-3/4 4-1/8 4-1/8 2-7/8 3 x 3/4 (1) 4-1/ / /4 2 3 x 1-1/2 (2) 5-1/4 1-1/4 9-5/8 2-11/ /8 4-3/4 2-7/8 4 x 3/4 (1) 4-11/ / / / x 1-1/2 (2) 5-13/16 1-1/4 10-3/ /16 2-5/8 4-1/8 5-13/16 2-7/8 6 x 3/4 (1) / / /8 2 6 x 1-1/2 (2) 7-1/8 1-1/4 11-1/2 2-11/16 3-7/8 4-1/8 8-1/8 2-7/8 8 x 3/4 (1) 7-1/ / /8 8-1/2 10-1/8 2 8 x 1-1/2 (2) 8-9/16 1-1/4 12-9/ /16 4-7/8 8-1/2 10-1/8 2-7/8 Page 131 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

84 ot-tap Saddle Installation Basic Installation ot-tap Saddles are designed for adding branch connections to piping systems under live ( hot ) pressure. ot-tap Saddle branch outlets are either 3/4" socket (with 1" Spigot O.D.) or 1-1/2" socket (with 2" Spigot O.D.) in saddle sizes 2" through 8" to t IPS pipe using a built-in O-ring seal. Internal cutter is operated using conventional ratchet and drive extension and permanently retains coupon cut from pipe. aximum operating pressure at 73 F is 235 psi for saddle sizes 2" - 4", 200 psi for 6" saddles & 150 psi for 8". SEE PRODUCT ISTAATIO ISTRUCTIO (T-3A) FOR DETAIS COPOETS STEP 3 Cement Branch Take-off STEP 6 Back-off Cutter to Top to Open Flow The ot-tap Saddle includes the following components: 1. Cap 2. Upper O-ring 3. ot-tap Cutter 4. Bolt/Washer 5. Saddle Body 6. ower O-ring 7. Saddle Bottom 8. ut/washer STEP 4 Allow joint to cure. Remove Cap STEP 7 Reinstall Opening Sealed Cap STEP 1 Assemble on Pipe STEP 5 Tap to Required Depth STEP 2 Torque to Speci cations ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 132 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

85 Repair Fittings Schedule 40 Repair Fittings Schedule 40 Pipe Repair Fittings Allows Difficult Broken Pipe Repair To Be ade Easily Pipe Extenders Inside Connectors Pipe Extenders, Class 200 Extender Fittings Class 200 Pipe Page 133 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

86 Repair Couplings Dimensions & Information Repair Couplings (S118) Spigot x Socket (S119) Socket x Socket ulti-function Telescoping Design Socket x Socket Configuration for Pipe Repair or Use as a Short-Stroke Expansion Joint Spigot x Socket Configuration for Replacing Damaged Fittings Both Configurations can be Easily odified for Opposite Use Available in PVC White Double O-ring Seal in EPD or high-grade FK 1/2" - 2" Pressure Rated to F (23 C) 2-1/2" - 4 Pressure Rated to F (23 C) 6" Pressure Rated to F (23 C) SF Certified for Potable Water Use Versatile Repair Capability Spears Repair Couplings provide a variety of system repair and alteration solutions. Use Socket x Socket configurations for quick pipe damage repair - can also be used as a short-stroke expansion joint to compensate for thermal expansion & contraction. Spigot x Socket configurations are excellent for lateral and riser add-ons, damaged fitting replacement, or for installing valves in existing piping systems. Order the wrong configuration? Simply cut coupling from Socket shaft end to function as a spigot or add a coupling to Spigot shaft end for Socket connections. Pipe Damage Repair Or Use as Expansion Joint ateral Add-on Or Fitting Replacement Valve Retrofit Installation ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 134 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

87 Repair Couplings Dimensions & Information Repair Couplings Spigot x Socket EPD O-ring 3 2 Pressure Rating 1/2" -2" F 2-1/2" -4" F 6" & Up F S Part umber Size 2 3 S Approx. Wt. (bs.) S /2 7/8 5-7/8 6-3/4 1-7/ S / /8 8-1/4 1-3/ S /8 7-7/8 8-7/8 2-1/ S /4 1-1/4 8-3/8 9-5/8 2-7/ S /2 1-3/8 8-5/8 9-7/8 2-11/ S /2 9-1/4 10-5/8 3-3/ S /2 1-3/4 12-3/8 13-7/8 3-15/ S /8 12-3/8 14-1/8 4-9/ S /4 13-1/4 15-1/4 5-11/ S /4 8-3/ ISTAATIO OTE: For expansion joint applications, install with unit 1/2 extended. System must be supported and blocked against thrusts and movement under pressure. ay be installed with fl ow in either direction Repair Couplings Socket x Socket EPD O-ring 1 2 Pressure Rating 1/2" -2" F 2-1/2" -4" F 6" & Up F S Part umber Size 1 2 S Approx. Wt. (bs.) S /2 7/8 7-5/8 5-7/8 1-7/ S / /8 7-3/8 1-3/ S /8 10-1/8 7-7/8 2-1/ S /4 1-1/4 10-7/8 8-3/8 2-7/ S /2 1-3/8 11-3/8 8-5/8 2-11/ S /2 12-1/4 9-1/4 3-3/ S /2 1-3/4 15-7/8 12-3/8 3-15/ S /8 16-1/8 12-3/8 4-9/ S /4 17-3/4 13-1/4 5-11/ S / ISTAATIO OTE: For expansion joint applications, install with unit 1/2 extended. System must be supported and blocked against thrusts and movement under pressure. ay be installed with fl ow in either direction Page 135 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

88 Repair Couplings Dimensions & Information Short Repair Couplings Space Saving, Compact Version of Standard Repair Coupling Requires 1/3 less Space (S118) Spigot x Socket (S119) Socket x Socket Compact Telescoping Design Socket x Socket Configuration for Pipe Repair or Use as a Short-Stroke Expansion Joint Spigot x Socket Configuration for Replacing Damaged Fittings Both Configurations can be Easily odified for Opposite Use Available in PVC White, Sizes 1/2" - 2" EPD Double O-ring Seal Pressure Rated to F (23 C) SF Certified for Potable Water Use Short Repair Couplings Spigot x Socket 3 Pressure Rating EPD O-ring F S 5 Part umber Size S Approx. Wt. (bs.) S /2 4-5/ /16 3/4 1-7/ S /4 4-3/4 5-7/16 13/16 1-3/4 2-1/4.31 S /4 5-9/16 15/16 2-1/16 2-3/16.39 S /4 5-11/16 6-5/ /16 2-1/2.61 S /2 5-13/16 6-3/4 1-1/8 2-11/ /16.76 S /8 8-5/16 1-3/16 3-1/4 3-1/ ISTAATIO OTE: For expansion joint applications, install with unit 1/2 extended. System must be supported and blocked against thrusts and movement under pressure. ay be installed with fl ow in either direction. Short Repair Couplings Socket x Socket 1 Pressure Rating EPD O-ring F 4 S 5 Part umber Size S Approx. Wt. (bs.) S /2 5-7/8 4-5/16 7/8 3/4 1-7/ S /4 6-9/16 4-3/4 1 13/16 1-3/4 2-1/4.36 S /16 4-3/4 1-1/8 15/16 2-1/16 2-3/16.47 S /4 7-15/ /16 1-1/ /16 2-1/2.73 S /2 8-1/4 5-13/16 1-3/8 1-1/8 2-11/ /16.91 S /16 7-3/8 1-1/2 1-3/16 3-1/4 3-1/ ISTAATIO OTE: For expansion joint applications, install with unit 1/2 extended. System must be supported and blocked against thrusts and movement under pressure. ay be installed with fl ow in either direction. ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 136 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

89 Compression Couplings & ale Adapters Dimensions & Information PVC Compression Couplings ulti-featured Design PVC White and Industrial PVC ray Easy-Thread Compression ut Converts to Spigot Coupling Excellent for quick connections, system modifications and repairs. Spears redesigned Compression Coupling provides improved function, broader application and increased versatility. Standard PVC White units have been a long standing choice for Irrigation and Pool & Spa applications. PVC ray Industrial unit provides broader range of Industrial and Chemical processing applications. Compression nut features strong Buttress threads engineered for easier tightening during installation. ew body design has pipe-spigot dimensions allowing unit to be used to convert a socket fi tting to a compression fi tting. Available in IPS sizes 1/2" through 6". PVC White & PVC ray Industrial Construction eavy bodied, chemical and corrosion resistant PVC white or new PVC ray Industrial units provide for a broad range of applications. Buna- or EPD Compression askets PVC White unit comes with Buna- compression gaskets while new PVC ray Industrial unit is offered with EPD gaskets. Strong, Buttress Threaded Compression uts Revised ut design features increased strength of Buttress thread plus greater ease of ut installation onto Body. Superior to standard pipe or square-cut ACE type threads. Full Service 200 PSI Pressure Rating 200 psi maximum internal pressure 73 F. SF Certified for Potable Water Use Compression Couplings with EPD are certifi ed by SF International for use in potable water systems. Spigot Conversion Capability Convert socket-outlet plastic pipe fi tting to compression-outlet fi tting. Simply cut the Compression Coupling in half next to center holding ribs. Body now functions as a spigot for solvent weld attachment to fi tting socket (for Compression Couplings through 2" only see reverse side illustration). Compression Couplings Part umber Size (in.) S /2 5-3/ /16 3-3/8 S /4 5-7/16 2-1/8 3-9/16 S /16 2-1/2 3-3/4 S /4 6-1/4 2-15/16 4-1/8 S /2 6-1/2 3-5/16 4-5/8 S /8 3-15/16 5-1/16 S /2 8-11/16 4-7/8 5-7/8 S /2 5-1/2 6-3/16 S /16 6-3/4 7-3/8 S /8 9-5/16 7-9/16 Page 137 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

90 Compression Couplings & ale Adapters Dimensions & Information Easy Installation Spears Compression Couplings easily install by simply sliding nut over pipe, slip on gasket, then insert into body and tighten nuts. Convert Fittings to Compression Outlet Socket type ttings 3/4" through 2-1/2" can be easily converted to compression outlets sizes 1/2 through 2 by simply cutting the Compression Coupling at the center holding ribs and solvent welding the spigot body into a tting socket. Compression Coupling Size (in.) Body Spigot Size (in.) 1/2 3/4 3/ /4 1-1/4 1-1/2 1-1/ /2 2-1/2 3 Important Installation ote WARI: The compression joints provide a positive seal but do not restrain pipe from thrusts and movement under pressure. Use of compression joint requires blocking connecting pipe to prevent any movement. Failure to do so can result in system failure or severe personal injury. Use in cold water/ uid applications only. ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 138 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

91 Compression Couplings & ale Adapters Dimensions & Information Compression ale Adapters Quickly Adapts Pipe to IPT Thread Easy-Thread Compression ut PVC White with Buna- or EPD asket 200 psi Pressure Rating SF Certified for Potable Water Use Uses same ut Wrench sets available for Compression Couplings PVC Compression ale Adapters W T Part o. Buna- EPD Size T W S S130E-05 1/2 2-11/ /16 1/4 11/16 1-1/8 S S130E-07 3/4 2-15/16 2-1/8 5/16 11/16 1-3/8 S S130E /16 2-1/2 5/16 7/8 1-11/16 S S130E /4 3-3/8 2-15/16 5/16 7/8 2 S S130E /2 3-9/16 3-5/16 3/8 29/32 2-3/8 S S130E /8 3-15/16 13/32 15/16 3 Page 139 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

92 ripoc Compression Coupling, ale Adapter, Female Adapter Dimensions & Installation ripoc Compression Couplings ripoc Compression Coupling Tightening nut compresses special stainless steel ripper Ring to firmly grip pipe and prevent potential pull-out. Compressed land Ring ensures positive O-ring seal against pipe. riploc Compression Coupling w/epd O-Ring Seals WARI: DO OT ISERT FIERS Part umber Size (in.) Approx. Wt. (bs.) S /2 4-13/ /16.18 S /4 5-1/8 2-1/8.28 S /16 2-1/2.41 S / /16.54 S /2 6-11/16 3-5/16.89 S / / ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 140 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

93 ripoc Compression Coupling, ale Adapter, Female Adapter Dimensions & Installation ripoc Compression Adapters ripoc Compression ale Adapters ripoc Compression ale Adapters w/epd O-Ring Seals ripoc Compression Female Adapters WARI: DO OT ISERT FIERS Part o. Size Approx. Wt. (bs.) S /2 2-9/ /16 1/4.10 S /4 2-13/16 2-1/8 5/16.15 S /8 2-1/2 5/16.22 S /4 3-3/8 2-15/16 11/32.32 S /2 3-9/16 3-5/16 3/8.43 S /8 3-15/16 13/32.67 ripoc Compression Female Adapters w/epd O-Ring Seals FI. 1 FI. 2 1/2" - 1" 1-1/4" - 2" WARI: DO OT ISERT FIERS Part o. Size Approx. Wt. (bs.) S /2 2-13/ /16 3/32.14 S /4 3-3/16 2-1/8 3/16.22 S /8 2-1/2 7/32.34 S /4 4-1/8 2-15/16 9/16.47 S /2 4-9/16 3-5/16 9/32.80 Page 141 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line

94 ripoc Compression Coupling, ale Adapter, Female Adapter Dimensions & Installation ripoc Push-On Coupling ripoc Push-On Coupling Specially designed stainless steel ripper Ring to firmly grip pipe and prevent potential pull-out. Compressed land Ring ensures positive O-ring seal against pipe. riploc Push-On Coupling w/epd O-Ring Seals WARI: DO OT ISERT FIERS Part umber Size Approx. Wt. (bs.) /2 3-13/16 1-5/ / / /8 2-1/ /4 4-3/16 2-5/ /2 4-1/ /16 3-7/16.69 ject to Change. Check On-line

95 ripoc Compression Coupling, ale Adapter, Female Adapter Dimensions & Installation ripoc Compression Fittings Installation Female Adapter Coupling ale Adapter land Ring Pipe EASY ISTAATIO Spears ripoc Compression Couplings easily install by simply sliding nut over pipe, slip on components in order shown, then insert into body and tighten nuts. STEP 1 Install Compression ut. Compression ut STEP 2 Install ripper Ring. Stainless Steel ripper Ring O-ring Seal POSITIOI IS CRITICA, OCK RI WI OT OVE BACK. STEP 3 Install land Ring and pre-lubricated O-ring. STEP 4 Slide ripper Ring, land Ring & O-ring down until O-ring is 1" from pipe end. 1" 1" STEP 5 STEP 6 and Tighten only Compression ut. DO OT use Compression Coupling ut Wrench or Strap Wrench. Additional tightening is not required to seal. ripper ring, gland ring, O-ring and body must be mated together before tightening nut. Use equal pressure to bottom out the land Ring to body. EQUA PRESSURE Compression Coupling Size (in.) A PARTS ATED WARI: DO OT ISERT FIERS. ESURE TAT PIPE AD FITTIS ARE FREE OF DIRT AD DEBRIS PRIOR TO ISTAATIO. Body Spigot Size (in.) COVERT FITTIS TO COPRESSIO OUTET Socket-type fi ttings 3/4" through 2-1/2" can be easily converted to ripoc compression outlet sizes 1/2" through 2" by simply cutting the riploc Compression Coupling at the center holding ribs and solvent welding the spigot body into a fi tting socket. Cut at 90 1/2 3/4 3/ /4 1-1/4 1-1/2 1-1/ /2 ade in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 142 Due to aterial Cost Variations, Prices Subject to Change. Check On-line

96 Flanges - See Schedule 80 PVC Flange Technical Information Flanges - See Schedule 80 PVC Flange Technical Information ASKETS FAE CUT-I KIT BOT KIT Flange One Piece Blind Flange Flange Van Stone Style with lass Filled PVC Ring Flange Van Stone Style with PVC Ring Page 143 Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line