Duct Technical Information TECHNICAL INFORMATION & DIMENSIONS
|
|
|
- Maurice Anthony
- 5 years ago
- Views:
Transcription
1 TECNICA INFORATION & DIENSIONS Contact Spears for any Information not found. Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 236
2 Fume & Air Duct Overview Industrial rade for eneral Purpose & Corrosive Vapor Fumes Spears Industrial rade Fabricated & C Duct provides a light weight and low maintenance alternative to conventional metal ducting with superior chemical & corrosion resistance. Produced in a wide variety of sizes and confi gurations from 6" through 24" with custom fabrication available to virtually any size and shape. Thermoplastic Duct & Fittings Construction Spears Fabricated duct and fi ttings are manufactured in accordance with applicable guidelines and requirements to assure sound, reliable construction, performance and compatibility that meet customer design specifi cations. Included with our high quality standard duct line, Spears offers duct product designed to the Sheet etal and Air Conditioning Contractors National Association (SACNA) requirements. Chemical & Corrosion Resistant & C Construction Unlike metal, & C Duct never rusts, scales or pits remaining virtually maintenance free for years. Fabricated from Premium Quality Seamless Extruded Round Duct Spears Fabricated Duct Fittings are produced from premium quality & C materials conforming to AST D1784. Custom Fabricated Duct Fittings, Accessories & Complete Exhaust Systems Spears offers custom fabrication for a wide variety of specialty needs including: Square Duct Rectangular Duct Fume oods Fume Exhaust Systems Page 237 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
3 Industrial rade for eneral Purpose & Corrosive Vapor Fumes Spears Industrial rade Fabricated & C Duct provides a light weight and low maintenance alternative to conventional metal ducting with superior chemical & corrosion resistance. Produced in a wide variety of sizes and configurations from 6" through 24" Seamless Extruded Round Duct and Cold Rolled Fabricated Duct in larger sizes with custom fabrication available to virtually any size and shape. Thermoplastic Duct & Fittings Construction Spears Fabricated duct and fittings are manufactured in accordance with applicable guidelines and requirements to assure sound, reliable construction, performance and compatibility that meet customer design specifications. Included with our high quality standard duct line, Spears offers duct product designed to the Sheet etal and Air Conditioning Contractors National Association (SACNA) requirements. Chemical & Corrosion Resistant & C Construction Unlike metal, & C Duct never rusts, scales or pits remaining virtually maintenance free for years. Spears Fabricated Duct & Duct Fittings are produced from premium quality & C materials conforming to AST D1784. Custom Fabricated Duct Fittings, Accessories & Complete Exhaust Systems Spears offers custom fabrication for a wide variety of specialty needs including: Square Duct Rectangular Duct Fume oods Fume Exhaust Systems eneral Specifications for Round & C Duct Fittings aterials All fabricated duct fittings, sizes 6" to 24", shall be constructed from AST D1784 or C seamless Extruded Duct. Sizes above 24" shall be custom produced from Cold Rolled Type I & Type II, rade I extruded sheet with thermal fused seam. Elbow Configurations Elbow angles are manufactured through the use of thermoforming and hot gas welding. Standard 45 elbows are offered 1-piece formed, with 2-piece or 3-piece welded. The 45 3-piece meets SACNA requirements. Standard 90 elbows are offered in 2-piece formed, with 3-piece or 5-piece welded. The 90 5-piece meets SACNA requirements. Additional elbow configurations meeting SACNA requirements are available upon request. Flange Configurations Flanges are fabricated to SACNA bolt pattern specifications and can be provided in ANSI Class 150 bolt patterns. aximum Service Temperatures = 140 F; C = 200 F Joining ethods Solvent cement, hot-gas welding, or flanged connections. Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 238
4 Cold Rolled Fabricated Round Duct Round duct nominal size 26" to 48" is cold rolled from extruded or C sheet material. The seam is thermal fused utilizing a computerized welding machine. The sheet edges are heated and pressed together pneumatically, achieving 100% weld strength using no filler rod. Wall thickness is 3/16" for sizes up to 32" diameter. Above 32" diameter, 1/4" material will be used, unless otherwise specified. Cold rolled duct is produced in 4 foot lengths. arge duct fittings can be fabricated to order. Contact Spears with requirements for additional information. SACNA Flange Bolt Pattern Dimensions Nominal Duct Size Flange Outside Dia. Flange Thickness Bolt Circle Dia. Bolt ole Dia 6 10" 1/4" 8-1/2" 5/16" " 1/4" 10-1/2" 5/16" " 1/4" 12-1/2" 5/16" " 1/4" 14-3/8" 5/16" " 1/4" 16-1/2" 5/16" " 1/4" 18-1/2" 5/16" " 1/4" 20-1/2" 5/16" " 1/4" 22-1/2" 5/16" " 1/4" 26-1/2" 5/16" 24 No. Of Bolts Dimensions Round Duct socket dimensions shall meet the requirements of the Sheet etal and Air Conditioning Contractors National Association Thermoplastic Duct Construction anual. Fittings shall be constructed from seamless duct meeting the following dimensional specifications. All dimensions are in inches: Size Average Average Out of in. ax. WT (lbs.) O.D. O.D. TO. Round 1 Wall Wall Per Ft. 6" ±.020 ± " ±.020 ± " ±.025 ± " ±.025 ± " ±.030 ± " ±.030 ± " ±.040 ± " ±.070 ± " ±.090 ± : Out-of-Round as produced at factory. Negative Pressure Ratings AX. Internal Negative Pressure Rating Inches of Various Temperatures F TEPERATURE F Size (in.) " " " " " " " " " PSI = Inches of Water x.0361; Inches of ercury = Inches of Water x Positive Pressure Ratings AX. Internal Positive Pressure Rating Various Temperatures F TEPERATURE F Size (in.) " " " " " " " " " Page 239 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
5 C AX. Internal Negative Pressure Rating Inches of Various Temperature F TEPERATURE F Size (in.) " " " " " " " " " PSI = Inches of Water x.0361; Inches of ercury = Inches of Water x C AX. Internal Positive Pressure Rating Various Temperatures F TEPERATURE F Size (in.) " " " " " " " " " anger & Support Spacing Support spacing is based on duct diameter, system temperature, location of stress loads, and loads from solids accumulation in the system. eavy system components and loads must be independently supported. Secure hangers and supports to building structure to prevent vibration and properly aligned to prevent stress on the system. Use hangers with an adequate load-bearing surface free of rough or sharp edges and of a type that will not restrict linear movement of the system due to expansion and contraction. Avoid over tightening. Duct aximum anger Support Spacing (ft.) Duct C aximum anger Support Spacing (ft.) Size Temperature F Size Temperature F (in.) (in.) " " " " " " " " " " " " " " " " " " Thermal Expansion & Contraction Thermal expansion and contraction of the system must be properly addressed during system design and installation. In-line expansion joints or use of the system s inherent line exibility can be used to construct expansion loops and offsets as required. The expansion or contraction rate of Spears or C Duct can be calculated using the coef cient of linear expansion (y) in the following formula: = 12 y ( T) where: = expansion or contraction of duct in inches y for = 2.9 x 10-5 in/in/ F -ORy for C = 3.2 x 10-5 in/in/ F = ength of duct run in feet T = Temperature change F (T max. - T min.) T max. = maximum change in operating temperature ( F) T min. = temperature at time of installation ( F) Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 240
6 TEE PART NUBER C SIZE C /8 8-1/2 8-5/ C /8 9-1/2 9-5/ C / /2 11-3/ / C / / / / /8 13-1/ C / / /4 13-5/ /2 14-3/ C / / /4 14-5/ /2 16-3/ C / / /4 15-5/ /2 18-3/ C /4 13-3/4 15-1/4 16-1/4 30-1/2 20-7/ C /4 16-1/2 17-1/ /2 24-1/2 REDUCIN TEE 1 PART NUBER C SIZE C 6x /16 7-1/2 8-15/ C 8x /16 7-1/2 9-15/ C 8x /8 8-1/2 9-5/ C 10x /2 7-1/ / C 10x /16 8-1/ / / C 10x /16 9-1/ / / C 12x /2 7-1/ / C 12x /16 8-1/ / / C 12x /16 9-1/ / / C 12x / /2 12-3/ /8 11-1/ C 14x /8 7-1/2 13-5/ / C 14x /16 8-1/2 13-5/ / C 14x /16 9-1/2 13-5/ /8 9 Page 241 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
7 REDUCIN TEE 1 PART NUBER C SIZE C 14x12 9-1/ / / / /8 14-3/8 13-1/ C 16x /8 7-1/2 14-5/ / C 16x /16 8-1/2 14-5/ / C 16x /16 9-1/2 14-5/ / C 16x / /2 14-5/ /8 11-1/ C 16x12 9-1/ / / / /8 16-3/8 13-1/ C 16x14 9-3/ / /4 14-5/ /2 16-3/8 14-3/ C 18x /8 7-1/2 15-5/ / C 18x /16 8-1/2 15-5/ / C 18x /16 9-1/2 15-5/ / C 18x / /2 15-5/ /8 11-1/ C 18x12 9-1/ / / / /8 18-3/8 13-1/ C 18x14 9-3/ / /4 15-5/ /2 18-3/8 14-3/ C 18x / / /4 15-5/ /2 18-3/8 16-3/ C 20x /16 7-1/2 16-9/ / C 20x /4 8-1/2 16-1/ / C 20x /4 9-1/2 16-1/ / C 20x /4 10-1/2 16-1/ / / C 20x12 9-1/ /4 11-9/ /4 23-1/8 20-7/ / C 20x14 9-3/4 13-3/4 12-1/4 16-1/4 24-1/2 20-7/ / C 20x /4 13-3/4 13-1/4 16-1/4 26-1/2 20-7/ / C 20x /4 13-3/4 14-1/4 16-1/4 28-1/2 20-7/ / C 24x /16 7-1/2 18-9/ / C 24x /4 8-1/2 18-1/ / C 24x /4 9-1/2 18-1/ / C 24x /4 10-1/2 18-1/ /2 11-1/ C 24x12 9-1/ /4 11-9/ /4 23-1/8 24-1/2 13-1/ C 24x14 9-3/4 15-3/4 12-1/4 18-1/4 24-1/2 24-1/2 14-3/ C 24x /4 15-1/4 13-1/4 17-3/4 26-1/2 24-1/2 16-3/ C 24x /4 15-3/4 14-1/4 18-1/4 28-1/2 24-1/2 18-3/ C 24x /4 15-3/4 15-1/4 18-1/4 30-1/2 24-1/2 20-7/16 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 242
8 90 EBOW 2-PIECE PART NUBER C SIZE C 6 8-5/ / C 8 9-5/ / C /8 12-7/8 11-1/ C /8 13-7/8 13-1/ C / / / C / / / C / / / C / / / C /4 20-1/4 24-1/2 90 EBOW SACNA 5-PIECE R PART NUBER C SIZE R C 6 9-7/8 12-3/ C / C / / / C /8 20-1/8 13-1/ C /8 22-5/8 14-3/ C /8 25-3/8 16-3/ C / / / C /2 20-7/ C / /2 36 Page 243 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
9 90 EBOW 3-PIECE PART NUBER C Size C /16 9-7/16 6-5/ C 8 8-1/ / C /2 10-3/ C / /8 12-3/ C /8 15-5/ C /8 17-1/ C /4 18-3/ C /8 20-3/ C / C C C C C EBOW SACNA 3-PIECE R PART NUBER C Size R 43063S S-060C /2 6-5/ S S-080C /2 8-5/ S S-100C /2 10-3/ S S-120C /2 12-3/ S S-140C / S S-160C / Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 244
10 45 EBOW 1-PIECE J PART NUBER C SIZE J C 6 4-1/ C 8 4-7/8 2-3/ C /8 2-7/8 11-1/ C /4 3-1/4 13-1/ C / / / C /16 4-3/ / C /8 4-5/8 18-3/ C /16 5-1/ / C /8 5-7/8 24-1/2 45 EBOW SACNA 3-PIECE J R PART NUBER SIZE C J R C 6 7-1/8 4-5/ C / C /16 6-5/ / C /16 7-1/ / C / / / C / / / C /8 9-5/8 18-3/ C / / / C /8 12-3/8 24-1/2 36 Page 245 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
11 BAST ATE Belled End N 1 PART NUBER C Size N 43B B-060C / /4 10-1/4 4-1/ /2 13/16 43B B-080C 8 5-5/ /2 5-1/ /16 5/8 43B B-100C / /8 14-5/8 6-7/8 11-1/8 13-1/4 13/16 43B B-120C / /2 7-7/8 13-1/8 14 9/16 43B B-140C /8 22-1/4 20-3/4 8-1/2 14-3/8 16-5/8 5/8 43B B-160C /8 22-1/4 20-3/4 9-1/2 16-3/8 16-5/8 5/8 43B B-180C /8 25-1/4 23-3/4 10-1/2 18-3/8 19-5/8 5/8 43B B-200C /4 24-3/4 11-1/2 20-7/ / B B-240C / / / /2 27-3/16 1 BUTTERFY DAPER N PART NUBER Size N C 43BD BD-060C 6 8-1/ /4 43BD BD-080C / /2 43BD BD-100C /8 8 43BD BD-120C /2 13-1/8 9-1/2 43BD BD-140C /2 14-3/8 9-1/2 43BD BD-160C / BD BD-180C / BD BD-200C / BD BD-240C /2 21 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 246
12 CROSS 1 PART NUBER C Size C /8 8-1/2 8-5/ / C /8 9-1/2 9-5/ / C / /2 11-3/ /8 11 1/ C / / / / /8 24-3/8 13 1/ C / / /4 13-5/ /2 26-5/8 14 3/ C / / /4 14-5/ /2 28-5/8 16 3/ C / / /4 15-5/ /2 30-5/8 18 3/ C /4 13-3/4 15-1/4 16-1/4 30-1/2 32-1/2 20-7/ C /4 16-1/2 17-1/ / /2 REDUCIN CROSS 1 1 PART NUBER C Size C 6x /16 7-1/2 8-15/ / C 8x /16 7-1/2 9-15/ / C 8x /8 8-1/2 9-5/ / C 10x /2 7-1/ / C 10x /16 8-1/ / /8 11-1/ C 10x /16 9-1/ / /8 11-1/ C 12x /2 7-1/ / C 12x / / /8 13-1/ C 12x /16 9-1/ /16v /8 13-1/ C 12x / /2 12-3/ /8 13-1/8 11-1/ C 14x /8 7-1/2 13-5/ /4 14-3/ C 14x /16 8-1/2 13-5/ /8 14-3/8 7 Page 247 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
13 REDUCIN CROSS 1 1 PART NUBER C Size C 14x /16 9-1/2 13-5/ /8 14-3/ C 14x / /2 13-5/ /8 14-3/8 11-1/ C 14x12 9-1/ / / / /8 26-5/8 14-3/8 13-1/ C 16x /8 7-1/2 14-5/ /4 16-3/ C 16x /16 8-1/2 14-5/ /8 16-3/ C 16x /16 9-1/2 14-5/ /8 16-3/ C 16x / /2 14-5/ /8 16-3/8 11-1/ C 16x12 9-1/ / / / /8 28-5/8 16-3/8 13-1/ C 16x14 9-3/ / /4 14-5/ /2 28-5/8 16-3/8 14-3/ C 18x /8 7-1/2 15-5/ /4 18-3/ C 18x /16 8-1/2 15-5/ /8 18-3/ C 18x /16 9-1/2 15-5/ /8 18-3/ C 18x / /2 15-5/ /8 18-3/8 11-1/ C 18x12 9-1/ / / / /8 30-5/8 18-3/8 13-1/ C 18x14 9-3/ / /4 15-5/ /2 30-5/8 18-3/8 14-3/ C 18x / / /4 15-5/ /2 30-5/8 18-3/8 16-3/ C 20x /16 7-1/2 16-9/ /8 20-7/ C 20x /4 8-1/2 16-1/ /2 20-7/ C 20x /4 9-1/2 16-1/ /2 20-7/ C 20x /4 10-1/2 16-1/ /2 20-7/ / C 20x12 9-1/ /4 11-9/ /4 23-1/8 32-1/2 20-7/ / C 20x14 9-3/4 13-3/4 12-1/4 16-1/4 24-1/2 32-1/2 20-7/ / C 20x /4 13-3/4 13-1/4 16-1/4 26-1/2 32-1/2 20-7/ / C 20x /4 13-3/4 14-1/4 16-1/4 28-1/2 32-1/2 20-7/ / C 24x /16 7-1/2 18-9/ /8 24-1/ C 24x /4 8-1/2 18-1/ /2 24-1/ C 24x /4 9-1/2 18-1/ /2 24-1/ C 24x /4 10-1/2 18-1/ /2 24-1/2 11-1/ C 24x12 9-1/ /4 11-9/ /4 23-1/8 36-1/2 24-1/2 13-1/ C 24x14 9-3/4 15-3/4 12-1/4 18-1/4 24-1/2 36-1/2 24-1/2 14-3/ C 24x /4 15-1/4 13-1/4 17-3/4 26-1/2 35-1/2 24-1/2 16-3/ C 24x /4 15-3/4 14-1/4 18-1/4 28-1/2 36-1/2 24-1/2 18-3/ C 24x /4 15-3/4 15-1/4 18-1/4 30-1/2 36-1/2 24-1/2 20-7/16 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 248
14 COUPIN N PART NUBER C SIZE N C C C / C / C / C / C / C /2 20-7/16 2-1/ C /2 24-1/2 2-1/2 REDUCER COUPIN 1 N PART NUBER C SIZE 1 N C 6x4 8-3/8 7-1/ / C 8x4 13-7/ / C 8x6 7-5/ / C 10x4 18-5/8 11-1/ / C 10x / / / C 10x8 7-15/ / / C 12x4 23-5/8 13-1/ / C 12x6 17-7/8 13-1/ / C 12x / C 12x / /8 11-1/8 2-13/16 Page 249 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
15 REDUCER COUPIN 1 N PART NUBER C SIZE 1 N C 14x4 28-1/ / / C 14x6 22-1/4 14-3/ / C 14x8 17-3/8 14-3/ / C 14x / /8 11-1/8 7-3/ C 14x12 7-3/ /8 13-1/8 2-3/ C 16x4 33-1/8 16-3/ / C 16x6 27-5/ / / C 16x8 22-7/ / / C 16x /4 16-3/8 11-1/8 12-1/ C 16x / /8 13-1/8 7-3/ C 16x / /8 14-3/8 2-13/ C 18x4 38-3/ / / C 18x6 32-3/8 18-3/ / C 18x8 27-1/2 18-3/ / C 18x / /8 11-1/8 17-5/ C 18x /4 18-3/8 13-1/8 12-1/ C 18x /8 18-3/8 14-3/8 7-7/ C 18x / /8 16-3/8 2-13/ C 20x4 43-1/4 20-3/ / C 20x6 37-7/ / / C 20x8 32-9/ / / C 20x /8 20-3/8 11-1/8 22-3/ C 20x / /8 13-1/8 17-5/ C 20x / /8 14-3/ / C 20x /8 20-3/8 16-3/8 7-7/ C 20x18 7-7/8 20-3/8 18-3/8 2-7/ C 24x4 50-5/8 24-1/ / C 24x / / / C 24x / / / C 24x /4 24-1/2 11-1/8 29-3/ C 24x /4 24-1/2 13-1/8 24-3/ C 24x / /2 14-3/8 20-5/ C 24x /4 24-1/2 16-3/8 14-3/ C 24x /4 24-1/2 18-3/8 9-3/ C 24x20 9-7/ /2 20-3/8 4-7/16 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 250
16 SEEVE COUPIN Socket (No Stop) PART NUBER SIZE C 4329S S-060C S S-080C S S-100C /8 4329S S-120C /8 4329S S-140C /8 4329S S-160C /8 4329S S-180C /8 4329S S-200C / S S-240C /2 FAT CAP Bell Socket W PART NUBER C SIZE W C 6 3-1/ C 8 3-1/ C / / C /4 13-1/ C /4 14-3/ C / / C /4 18-3/ C / C /4 24-1/2 Page 251 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
17 RAIN CAP Style A 1 N PART NUBER C SIZE 1 N A AC / / A AC / / A AC /8 11-1/ / A AC / / A AC / / / A AC / / / A AC /8 18-3/ / A AC /8 20-7/ / A AC / / /16 RAIN CAP Style B N PART NUBER Size N C B BC / / B BC / / B BC / /8 12-3/ B BC / / B BC / / B BC / / B BC / / B BC / / Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 252
18 DUCT FANE SACNA BOT PATTERN One Piece R BOT CIRCE DIAETER AX O.D. PART NUBER R BOT NO. OF OE AX Size CIRCE BOT C C C SIZE O.D. DIA. OES 4351S S-060C 6 3-1/2 2-11/16 7 3/16 3/16 8-1/2 8 5/ S S-080C 8 3-1/2 2-11/16 9 3/16 3/ /2 10 5/ S S-100C /2 2-11/ /8 3/16 3/ /2 12 5/ S S-120C 12 3/16 1/4 13-1/8 3/16 1/4 14-3/8 16 5/ S S-140C 14 3/16 1/4 14-3/8 3/16 1/4 16-1/2 16 5/ S S-160C 16 1/4 1/4 16-3/8 1/4 1/4 18-1/2 18 5/ S S-180C 18 1/4 1/4 18-3/8 1/4 1/4 20-1/2 20 5/ S S-200C 20 1/4 1/4 20-7/16 1/4 1/4 22-1/2 22 5/ S S-240C 24 1/4 1/4 24-1/2 1/4 1/4 26-1/2 24 5/16 28 BIND DUCT FANE CASS 150 BOT PATTERN One Piece R BOT CIRCE DIAETER AX O.D. PART NUBER C Size R BOT CIRCE DIA. NO. OF BOT OES OE SIZE C 6 1/4 9-1/2 8 7/ C 8 1/4 11-3/4 8 7/8 13-1/ C 10 1/4 14-1/ C 12 1/ C 14 1/4 18-3/ / C 16 1/4 21-1/ /8 23-1/ C 18 1/4 22-3/ / C 20 1/ /4 27-1/ C 24 1/4 29-1/ /8 32 AX O.D. Page 253 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
19 BIND DUCT FANE SACNA BOT PATTERN One Piece R BOT CIRCE DIAETER AX O.D. PART NUBER C Size R BOT CIRCE DIA. NO. OF BOT OES OE SIZE 4353S S-060C 6 1/4 8-1/2 8 5/ S S-080C 8 1/4 10-1/2 10 5/ S S-100C 10 1/4 12-1/2 12 5/ S S-120C 12 1/4 14-3/8 16 5/ S S-140C 14 1/4 16-1/2 16 5/ S S-160C 16 1/4 18-1/2 18 5/ S S-180C 18 1/4 20-1/2 20 5/ S S-200C 20 1/4 22-1/2 22 5/ S S-240C 24 1/4 26-1/2 24 5/16 28 AX O.D. WYE 2 2 PART NUBER C Size C 6 4-3/ / / / /4 13-5/ C 8 5-1/4 13-5/8 13-1/2 7-3/4 16-1/ / C /4 16-3/ / / /2 28-1/4 11-1/ C / /8 18-9/16 8-3/8 21-1/8 21-1/8 29-1/2 13-1/ C /8 20-5/8 21-7/8 10-3/8 23-1/8 24-3/8 34-3/4 14-3/ C /8 23-1/ /8 9-5/8 25-9/ /8 35-1/4 16-3/ C /2 25-7/ / / / C / /2 13-1/2 30-9/ /2 20-7/ C / / / / / / /8 24-1/2 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 254
20 REDUCIN WYE PART NUBER C Size C 6x4 2-7/ /16 9-1/ / / / / C 8x4 1-7/ / / / / / / C 8x6 3-11/ /8 12-5/16 6-3/ / / C 10x4 16-1/2 12-9/ /8 2-7/8 15-1/ /8 16-1/2 11-1/ C 10x6 2-5/8 14-1/8 13-3/8 5-1/8 16-5/8 15-7/ / C 10x /8 14-3/4 6-1/2 17-5/8 17-1/4 23-3/4 11-1/ C 12x4 5/ /8 1-7/8 16-1/2 14-5/8 16-1/2 13-1/ C 12x6 1-5/8 15-9/ /8 4-1/8 18-1/ / / C 12x8 3-1/ / /16 5-9/ / /4 13-1/ C 12x10 4-1/2 17-5/8 17-1/ /8 19-3/4 26-3/4 13-1/ / C 14x4 1-1/4 14-7/8 12-3/4 1-1/4 17-3/8 15-1/4 16-1/2 14-3/ C 14x / / / / / C 14x8 2-3/8 17-7/ /8 4-7/ / /8 23-3/4 14-3/ C 14x10 3-7/8 18-1/2 17-7/8 6-3/ /8 26-3/4 14-3/8 11-1/ C 14x12 5-1/4 19-1/2 19-1/4 7-3/ /4 29-1/2 14-3/8 13-1/ C 16x4 2-1/4 16-1/2 13-3/4 1/ / /4 16-1/2 16-3/ C 16x / /2 20-3/8 18-1/ / C 16x8 1-3/8 18-7/8 17-3/8 3-7/8 21-3/8 19-7/8 23-3/4 16-3/ C 16x10 2-7/ / /8 5-3/8 22-7/ /8 26-3/4 16-3/8 11-1/ C 16x12 4-1/ / /4 6-3/4 23-7/ /4 29-1/2 16-3/8 13-1/ C 16x14 6-1/8 22-1/ /8 8-5/8 24-9/ /8 33-1/4 16-3/8 14-3/ C 18x4 3/ / /4 3-1/4 20-3/ /4 16-1/2 18-3/ C 18x / /2 21-3/4 19-1/ / C 18x8 3/8 20-1/4 18-3/8 2-7/8 22-3/4 20-7/8 23-3/4 18-3/ C 18x10 1-7/8 21-5/ /8 4-3/ / /8 26-3/4 18-3/8 11-1/ C 18x12 3-1/4 22-5/ /4 5-3/ / /4 29-1/2 18-3/8 13-1/ C 18x14 5-1/8 23-7/ /8 7-5/ / /8 33-1/4 18-3/8 14-3/ C 18x16 6-1/8 24-7/ /8 8-5/ / /8 35-1/4 18-3/8 16-3/ C 20x4 4-1/4 19-1/ /4 1-3/4 21-9/ /4 16-1/2 20-7/ C 20x /8 18 1/2 23-1/8 20-1/ / C 20x8 5/8 21-5/8 19-3/8 1-7/8 24-1/8 21-7/8 23-3/4 20-7/ C 20x10 7/ / /8 3-3/8 25-3/ /8 26-3/4 20-7/ / C 20x12 2-1/ / /4 4-3/4 26-3/ /4 29-1/2 20-7/ / C 20x14 4-1/ / /8 6-5/8 27-5/ /8 33-1/4 20-7/ /8 Page 255 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
21 REDUCIN WYE PART NUBER C Size C 20x16 5-1/ / /8 7-5/8 28-5/ /8 35-1/4 20-7/ / C 20x18 6-1/ / / / / / C 24x4 3-3/4 21-7/8 17-3/4 6-1/4 24-3/8 20-1/4 16-1/2 24-1/ C 24x / / / / / C 24x8 2-5/8 24-7/ /8 1/ / /8 23-3/4 24-1/ C 24x10 1-1/8 25-1/2 22-7/8 1-3/ /8 26-3/4 24-1/2 11-1/ C 24x12 1/4 26-1/2 24-1/4 2-3/ /4 29-1/2 24-1/2 13-1/ C 24x14 2-1/8 27-5/8 26-1/8 4-5/8 30-1/8 28-5/8 33-1/4 24-1/2 14-3/ C 24x16 3-1/8 28-5/8 27-1/8 5-5/8 31-1/8 29-5/8 35-1/4 24-1/2 16-3/ C 24x18 4-1/2 29-5/8 28-1/ / /2 18-3/ C 24x20 6-7/8 31-5/8 30-7/8 9-3/8 34-1/8 33-3/8 42-3/4 24-1/2 20-7/16 DOUBE WYE 2 2 PART NUBER C Size C 6 4-3/ / / / /4 13-5/ C 8 5-1/4 13-5/8 13-1/2 7-3/4 16-1/ / C /4 16-3/ / / /2 28-1/4 11-1/ C / /8 18-9/16 8-3/8 21-1/8 21-1/8 29-1/2 13-1/ C /8 20-5/8 21-7/8 10-3/8 23-1/8 24-3/8 34-3/4 14-3/ C /8 23-1/ /8 9-5/8 25-9/ /8 35-1/4 16-3/ C /2 25-7/ / / / C / /2 13-1/2 30-9/ /2 20-7/ C / / / / / / /8 24-1/2 Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 256
22 REDUCIN DOUBE WYE PART NUBER C Size C 6x4 2-7/ /16 9-1/ / / / / C 8x4 1-7/ / / / / / / C 8x6 3-11/ /8 12-5/16 6-3/ / / C 10x4 16-1/2 12-9/ /8 2-7/8 15-1/ /8 16-1/2 11-1/ C 10x6 2-5/8 14-1/8 13-3/8 5-1/8 16-5/8 15-7/ / C 10x /8 14-3/4 6-1/2 17-5/8 17-1/4 23-3/4 11-1/ C 12x4 5/ /8 1-7/8 16-1/2 14-5/8 16-1/2 13-1/ C 12x6 1-5/8 15-9/ /8 4-1/8 18-1/ / / C 12x8 3-1/ / /16 5-9/ / /4 13-1/ C 12x10 4-1/2 17-5/8 17-1/ /8 19-3/4 26-3/4 13-1/8 11-1/ C 14x4 1-1/4 14-7/8 12-3/4 1-1/4 17-3/8 15-1/4 16-1/2 14-3/ C 14x / / / / / C 14x8 2-3/8 17-7/ /8 4-7/ / /8 23-3/4 14-3/ C 14x10 3-7/8 18-1/2 17-7/8 6-3/ /8 26-3/4 14-3/8 11-1/ C 14x12 5-1/4 19-1/2 19-1/4 7-3/ /4 29-1/2 14-3/8 13-1/ C 16x4 2-1/4 16-1/2 13-3/4 1/ / /4 16-1/2 16-3/ C 16x / /2 20-3/8 18-1/ / C 16x8 1-3/8 18-7/8 17-3/8 3-7/8 21-3/8 19-7/8 23-3/4 16-3/ C 16x10 2-7/ / /8 5-3/8 22-7/ /8 26-3/4 16-3/8 11-1/ C 16x12 4-1/ / /4 6-3/4 23-7/ /4 29-1/2 16-3/8 13-1/ C 16x14 6-1/8 22-1/ /8 8-5/8 24-9/ /8 33-1/4 16-3/8 14-3/ C 18x4 3/ / /4 3-1/4 20-3/ /4 16-1/2 18-3/ C 18x / /2 21-3/4 19-1/ / C 18x8 3/8 20-1/4 18-3/8 2-7/8 22-3/4 20-7/8 23-3/4 18-3/ C 18x10 1-7/8 21-5/ /8 4-3/ / /8 26-3/4 18-3/8 11-1/ C 18x12 3-1/4 22-5/ /4 5-3/ / /4 29-1/2 18-3/8 13-1/ C 18x14 5-1/8 23-7/ /8 7-5/ / /8 33-1/4 18-3/8 14-3/ C 18x16 6-1/8 24-7/ /8 8-5/ / /8 35-1/4 18-3/8 16-3/ C 20x4 4-1/4 19-1/ /4 1-3/4 21-9/ /4 16-1/2 20-7/ C 20x /8 18 1/2 23-1/8 20-1/ / C 20x8 5/8 21-5/8 19-3/8 1-7/8 24-1/8 21-7/8 23-3/4 20-7/ C 20x10 7/ / /8 3-3/8 25-3/ /8 26-3/4 20-7/ / C 20x12 2-1/ / /4 4-3/4 26-3/ /4 29-1/2 20-7/ / C 20x14 4-1/ / /8 6-5/8 27-5/ /8 33-1/4 20-7/ /8 Page 257 Spears anufacturing Company Due to aterial Cost Variations, Prices Subject to Change. Check On-line
23 REDUCIN DOUBE WYE PART NUBER C Size C 20x16 5-1/ / /8 7-5/8 28-5/ /8 35-1/4 20-7/ / C 20x18 6-1/ / / / / / C 24x4 3-3/4 21-7/8 17-3/4 6-1/4 24-3/8 20-1/4 16-1/2 24-1/ C 24x / / / / / C 24x8 2-5/8 24-7/ /8 1/ / /8 23-3/4 24-1/ C 24x10 1-1/8 25-1/2 22-7/8 1-3/ /8 26-3/4 24-1/2 11-1/ C 24x12 1/4 26-1/2 24-1/4 2-3/ /4 29 1/2 24-1/2 13-1/ C 24x14 2 1/8 27-5/8 26-1/8 4-5/8 30-1/8 28-5/8 33 1/4 24-1/2 14-3/ C 24x16 3 1/8 28-5/8 27-1/8 5-5/8 31-1/8 29-5/8 35 1/4 24-1/2 16-3/ C 24x18 4 1/2 29-5/8 28-1/ / /2 18-3/ C 24x20 6 7/8 31-5/8 30-7/8 9-3/8 34-1/8 33-3/8 42-3/4 24-1/2 20-7/16 Duct Rain Cap Duct Elbows Due to aterial Cost Variations, Prices Subject to Change. Check On-line Page 258
See Plastic Pipe Engineering Guide for additional information
Schedule 40 PVC Pipe Dimensions & Pressure Ratings Schedule 40 Pipe om. Pipe Size (in) O.D. Average I.D. in. Wall ominal Wt./Ft. aximum W.P. PSI* 1/8 0.405 0.249 0.068 0.051 810 1/4 0.540 0.344 0.088 0.086
FlameGuard WEIGHTS & DIMENSIONS CPVC FIRE SPRINKLER PIPING PRODUCTS. July 1, 2004 SUPERSEDES ALL PREVIOUS EDITIONS FG
Flameuard CPVC FIRE SPRIKER PIPI PRODUCTS WEITS & DIESIOS July 1, 2004 SUPERSEDES A PREVIOUS EDITIOS Visit our web site: www.spearsmfg.com F-4-0604 The information contained in this publication is based
FlameGuard TECHNICAL INFORMATION WEIGHTS & DIMENSIONS. January 1, 2007 SUPERSEDES ALL PREVIOUS EDITIONS CPVC FIRE SPRINKLER PIPING PRODUCTS FG
FlameGuard CPVC FIRE SPRIKER PIPIG PRODUCTS TECICA IFORATIO WEIGTS & DIESIOS January 1, 2007 SUPERSEDES A PREVIOUS EDITIOS Visit our web site: www.spearsmfg.com FG-4-0107 FlameGuard CPVC FIRE SPRIKER PIPIG
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
pvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
SPIRAL PIPE - OVAL SINGLE WALL
SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall
An example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
A A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders
Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder
Hardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
CPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
Series 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
FLAT OVAL DUCT AND FITTINGS
AND FITTINGS www.eccomfg.com ECCO INDEX FITTINGS Accessories... 136 Crosses... 136 Elbows... 137 Gauge Selection... 135 Laterals... 136 Ordering... 135 Tees... 136 Transitions... 135 GALVANIZED Gauge Chart...
P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints
Guideline No.P-04 (201510) P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints Issued date: 20 th October 2015 China Classification Society Foreword This Guideline is a part of CCS
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
INSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
DVS Technical Codes an Bulletins
DVS Technical Codes an Bulletins DVS 1904-1 (2010-02) Adhesive bonding of plastics in domestic installation Requirements on plants and personnel... 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in
1 Exam Prep. Questions and Answers
Part 1 1 Exam Prep Standard for Polyvinyl Chloride Pressure Pipe ANSI/AWWA C900-07 Questions and Answers 1. Which of the following statement is not a correct statement? A. A DR is the average O.D. divided
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
RUBBER EXPANSION JOINTS
RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability.
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Guide for Evaluating Your Hose Assembly Supplier
Guide for Evaluating Your Hose Assembly Supplier Supplier Evaluation Checklist, and How to Clearly Define Application Requirements Safe, reliable hose assemblies require appropriate specification work
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT PFT-0105
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT P O L I F L E X - PFT-05 POLIFLEX-T PTFE FLEXIBLE JOINT FEATURES Polytetrafluoroethylene (PTFE) hose has solved the short life problem of metall with most
APG001. Application Guide for Gas. T: F: E:
APG001 Application Guide for Gas T: 01480 442600 F: 01480 458829 E: customerservice@gpsuk.com www.gpsuk.com Application Guide for Gas Introduction 3-4 Range Overview 5-6 PE80 Yellow Pipe 7-9 Excel Yellow
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Non-Contaminating PVC Material Exceptionally Smooth Surface Characteristics Low TOC & Chemical Extraction Fast Particle Rinse Up
Low Extractable PVC Overview Non-Contaminating PVC Material Exceptionally Smooth Surface Characteristics Low TOC & Chemical Extraction Fast Particle Rinse Up Superior Performance, Lower Installation Costs
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
VBS-9263 Series. Application. Features. Applicable Literature
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VBS-9263 Series 1/2" and 3/4" Screwed NPT 316 Stainless Steel Stem Up Closed, Two-Way Valves General Instructions Application
General Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
VB-7211 Series. Application. Features. Applicable Literature. 1/2" to 1-1/4" Union End NPT Stem Up Open, Two-Way Valves General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VB-7211 Series 1/2" to 1-1/4" Union End NPT Stem Up Open, Two-Way Valves General Instructions Application VB-7211 series stem
1 DRIVE INDUSTRIAL IMPACT WRENCH
1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
Preparation and Installation of the Standard Type Flat Seat Rupture Disc / UNISERT Insert Holder Assembly (Sizes 10 and Larger)
Preparation and Installation of the Standard Type Flat Seat Rupture Disc / UNISERT Insert Holder Assembly (Sizes 10 and Larger) GEP-6029 Rev. V 101251 Ref. I.D.: 1540 WARNING USER SHOULD READ AND THOROUGHLY
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
VB-7323 Series. Application. Features. Applicable Literature. 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions
VB-7323 Series 1/2 to 2 Screwed NPT Three-Way Diverting Valves General Instructions Application VB-7323 series three-way diverting valves control hot or chilled water in heating or air conditioning systems.
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
Material Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
Multi-Flow Product Catalog
Multi-Flow Product Catalog Multi-Flow offers a variety of multi-purpose reducing connectors (06005-0600N, 12005-1200Q, and 18005-1800Q) that allow for complete flexibility in the design of drainage patterns.
SERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
High Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
VB-7213 Series. Application. Features. Applicable Literature. 1/2" to 2" Screwed NPT Stem Up Open, Two-Way Valves General Instructions
VB-7213 Series 1/2" to 2" Screwed NPT Stem Up Open, Two-Way Valves General Instructions Application VB-7213 series single seat, stem up open, two-way valves control water from 20 to 281 F (-7 to 138 C)
HYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
Vertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
Medical Gas Solutions
WHN YOU ND from OKRING okring Technology, C offers a patented, permanent, axially swaged tube fitting. This technology for medical gas applications has been approved by NFP 99-005 (Paragraph 5..0.7 (4)).
List of Figures. List of Tables
City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures
North American Orifice Metering System
Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual
PTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3
The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer
Right-Angle Tube Roller Model
SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.
Swage Socket (open)...86 Swage Button...87 Swage Socket (closed)...87 Swaging Sleeve for Flemish Eye...88 Mid Grip Clips...89 Wire Rope Clips...
Swage Socket (open).........................86 Swage utton...............................87 Swage Socket (closed).......................87 Swaging Sleeve for lemish ye................88 Mid Grip lips..............................89
VB-7263 Series. Application. Features. Applicable Literature
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com VB-7263 Series 1/2" to 2" Screwed NPT Stainless Steel Trim with Teflon Disc Stem Up Closed, Two-Way Valves General Instructions
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
DVS Technical - Codes and Bulletins. Table of Contents
DVS 1904-1 (2010-02) Adhesive bonding of plastic in domestic installation Requirements on plants and personnel. 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in domestic installation Pipes and fittings
OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
RCS Rupture Disc Assembly
RCS Rupture Disc Assembly 3-2225-3 The RCS Rupture Disc is a reverse acting, cross-scored rupture disc. It is a non-reclosing differential pressure relief device that provides instantaneous full opening
Quick Reference Technical Data
Bulletin 127C 2 Quick Reference Technical Data For over 100 years, The Spencer Turbine Company has specialized in innovative solutions to air and gas handling problems. Spencer's product line includes
Orbital Motors Type OMP X and OMR X
Technical Information Orbital Motors Type OMP X and OMR X powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev January 218 Major revision. 21 February 217 First edition. 11 2
Installation Operation Maintenance
682 Seal Cooler New generation seal cooler to meet and exceed the seal cooler requirements stated in the 4th Edition of API Standard 682 Installation Operation Maintenance Experience In Motion Description
PINS & BUSHINGS METRIC
PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts
Ecoflex pre-insulated pipe energy efficiency made easy
E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths
Buttweld Fittings ANSI B16.9, ANSI B16.28, MSS-SP-43, MSS-SP-95, MSS-SP-97
uttweld Fittings NSI 16.9, NSI 16.28, SS-SP-43, SS-SP-95, SS-SP-97 90 LR ELOWS 45 LR ELOWS 180 LR ELOWS 90 SR ELOWS oncentric and eccentric reducers, equal and reducing tees, 45 and 90 elbows, buttweld
SIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
VB-7212 Series. Application. Features. Applicable Literature. 5/8" O.D., 45 SAE Flared Stem Up Open, Two-Way Valves General Instructions
VB-7212 Series 5/8" O.D., 45 SAE Flared Stem Up Open, Two-Way Valves General Instructions Application VB-7212 series single seat, stem up open, two-way valves control water from 20 to 281 F (-7 to 138
WEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
Inserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
tubepress press procedure
tubepress press procedure tubepress 15mm up to 35mm tubepress 15 mm up to 35 mm 1. The tube ends must be clean with no scratches or grooves. Remove end caps. Cut tube to length. 2. Deburr tube inside and
Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
VB-7273 Series. Application. Features. Applicable Literature
VB-7273 Series 1/2" to 2" Screwed NPT Stainless Steel Trim Stem Up Open, Two-Way Valves General Instructions Application VB-7273 series single seat, stem down to close, two-way valves control water from
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
Section 7 AMERICAN. Specials
Section 7 AMERICAN Specials AMERICAN Specials The principal standards relating to AMERICAN Specials are ANSI/AWWA C110/A21.10, C151/A21.51, and C153/A21.53. These and other standards are referenced throughout
for Stainless Steel Lines of Pressure Vessels, Hot Water Boilers, Heat Exchangers, Secondary Side of Pressure Reducing Valves etc.
( LIFT TYPE for Stainless Steel Lines of Pressure Vessels, Hot Water Boilers, Heat Exchangers, Secondary Side of Pressure Reducing Valves etc. Safety relief valve is a category of valves with functions
3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
![Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]](/thumbs/94/120596583.jpg "Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]")
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
PVC Electrical Fittings & Accessories Price List
PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,
Pressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
Technical Information. ips. 11 Compensating for expansion and contraction
Technical Information System design 1 Dimensions of plastic piping systems 2 Sizing pipes 3 Pressure loss in pipe 5 Pressure loss in fittings and valves 8 Water hammer 9 Thermal expansion and contraction
Push-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
Casing Spacer Technology Leaders
Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,
Welded, Full Finished PIPE & Tubes
www.ahmedgroupindia.com Welded, Full Finished PIPE & Tubes Round Pipe Square Pipe Rectangular Pipe Scaffolding Pipe THE COMPANY PROFILE Ahmed Group - Metal Craft Industries We, Ahmed Group, incepted in
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
SECTION 48 - TRAFFIC STRIPES AND PAVEMENT MARKINGS TABLE OF CONTENTS
SECTION 48 - TRAFFIC STRIPES AND PAVEMENT MARKINGS TABLE OF CONTENTS Section Page 48-1 GENERAL...48.1 48-2 THERMOPLASTIC TRAFFIC STRIPES AND PAVEMENT MARKINGS...48.1 48-3 PAINTED TRAFFIC STRIPES AND PAVEMENT
KlassikDrain Section. Technical Handbook and Product Catalog. General purpose trench drainage
Technical Handbook and Product Catalog Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products
Coiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
User Manual 1792 Standing Seam Metal Roof Retractable Swivel Anchor
1 User Manual 1792 Standing Seam Metal Roof Retractable Swivel Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee
l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
Regulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
INTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked