VIDEO-BASED TRAINING LIBRARY (provided by The MARCOM Group)
|
|
- Teresa Holland
- 5 years ago
- Views:
Transcription
1 VIDEO-BASED TRAINING LIBRARY (provided by The MARCOM Group) Using a powerful combination of audio, full-motion video, text and colorful graphics, these video-based online courses provide cost-effective safety and regulatory compliance training. The courses are divided into a number of logical sections so information is easily understood and retained. These courses can be installed and run on SCORM 1.2 conformant learning management systems (LMS). CONSTRUCTION SAFETY English English Spanish Spanish SCORM Course ID # ID# 1.2 Length Crane Safety in Construction Environments E M-124 SP M-124 SCO 30 min. Dealing with Drug and Alcohol Abuse for Employees in E M-150 SP M-150 SCO 30 min. Construction Environments Dealing with Drug and Alcohol Abuse for Managers and E M-151 SP M-151 SCO 30 min. Supervisors in Construction Environments Electrocution Hazards in Construction Part I E M-152 SP M-152 SCO 45 min. Electrocution Hazards in Construction Part II E M-153 SP M-153 SCO 45 min. Eye Safety in Construction Environments E M-082 SP M-082 SCO 30 min. Fall Protection in Construction Environments E M-099 SP M-099 SCO 30 min. First Aid in Construction Environments E M-084 SP M-084 SCO 30 min. GHS Labeling in Construction Environments E M-219 SP M-161 SCO 45 min. GHS Safety Data Sheets in Construction Environments E M-220 SP M-160 SCO 45 min. Hand and Power Tool Safety in Construction Environments E M-076 SP M-076 SCO 30 min. Hand, Wrist and Finger Safety in Construction Environments E M-077 SP M-077 SCO 30 min. Hazard Communication in Construction Environments E M-221 SP M-166 SCO 45 min. Heat Stress in Construction Environments E M-095 SP M-095 SCO 30 min. Introduction to GHS for Construction Workers E M-222 SP M-159 SCO 45 min. Ladder Safety in Construction Environments E M-085 SP M-085 SCO 30 min. Personal Protective Equipment in Construction Environments E M-223 SP M-081 SCO 45 min. Rigging Safety in Construction Environments E M-125 SP M-125 SCO 30 min. Safe Lifting in Construction Environments E M SCO 30 min. Safety Orientation in Construction Environments E M-224 SP M-100 SCO 30 min. Slips, Trips and Falls in Construction Environments E M-149 SP M-149 SCO 30 min. Supported Scaffolding Safety in Construction Environments E M-074 SP M-074 SCO 45 min. Suspended Scaffolding Safety in Construction Environments E M-075 SP M-075 SCO 45 min. Working with Lead Exposure in Construction Environments E M-225 SP M-103 SCO 45 min. These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The courses are being provided for educational and informational purposes only and do not constitute and are not intended to provide OSHA compliance certification, regulatory compliance, a substitute for any hands on training required by applicable laws and regulations, or other legal or professional advice or services. By assessing these materials, you assume all responsibility and risk arising from the use of the content contained therein Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 1
2 GENERAL SAFETY English English ID # Spanish Spanish ID# SCORM 1.2 Course Length Accident Investigation E M-AIN SCO 30 min. ANSI Material Safety Data Sheet E M-066 SP M-066 SCO 30 min. Back Safety E M-043 SP M-043 SCO 30 min. Computer Workstation Safety E M-234 SP M-021 SCO 30 min. Conducting Safety Audits E M-SAU SCO 30 min. Conflict Resolution in Industrial Facilities E M-060 SP M-060 SCO 30 min. Conflict Resolution in the Office E M-058 SP M-058 SCO 30 min. Crane Safety E M-122 SP M-122 SCO 30 min. Dealing with Drug and Alcohol Abuse...for Employees E M-052 SP M-052 SCO 30 min. Dealing with Drug and Alcohol Abuse...for Managers and E M-053 SP M-053 SCO 30 min. Supervisors Dealing with Hazardous Spills E M-206 SP M-012 SCO 30 min. Distracted Driving E M SCO 30 min. Driving Defensively E M SCO 30 min. Driving Safety E M-131 SP M-131 SCO 30 min. Driving Safety: The Basics E M SCO 30 min. Electrical Safety E M-098 SP M-098 SCO 30 min. Eye Safety E M-064 SP M-064 SCO 30 min. Fall Protection E M-FAL SP M-FAL SCO 30 min. Fire Prevention in Healthcare E M-207 SP M-045 SCO 30 min. Fire Prevention in the Office E M-208 SP M-032 SCO 30 min. First Aid E M-209 SP M-070 SCO 30 min. Hand and Power Tool Safety E M-044 SP M-044 SCO 30 min. Hand, Wrist and Finger Safety E M-067 SP M-067 SCO 30 min. Handling a Sexual Harassment Investigation E M-049 SP M-049 SCO 30 min. Handling Compressed Gas Cylinders E M-CGC SP M-CGC SCO 30 min. Hazardous Materials Labels E M-210 SP M-013 SCO 30 min. Heat Stress E M-093 SP M-093 SCO 30 min. Industrial Ergonomics E M-065 SP M-065 SCO 30 min. Industrial Fire Prevention E M-211 SP M-031 SCO 30 min. Ladder Safety E M-080 SP M-080 SCO 30 min. Machine Guard Safety E M-MGD SP M-MGD SCO 30 min. Materials Handling Safety E M-MHS SP M-MHS SCO 30 min. Office Ergonomics E M-236 SP M-019 SCO 30 min. Office Safety E M-235 SP M-020 SCO 30 min. Preventing Workplace Violence E M SCO 30 min. Rigging Safety E M-123 SP M-123 SCO 30 min. Safety Housekeeping and Accident Prevention E M-094 SP M-094 SCO 30 min. Safe Lifting E M SCO 30 min. Safety Orientation E M-212 SP M-055 SCO 30 min. Safety Showers and Eye Washes E M-128 SP M-128 SCO 30 min. Sexual Harassment for Employees E M-047 SP M-047 SCO 30 min. Sexual Harassment for Managers and Supervisors E M-048 SP M-048 SCO 30 min. Slips, Trips and Falls E M-042 SP M-042 SCO 30 min. Using Fire Extinguishers E M-046 SP M-046 SCO 30 min. Welding Safety E M-WLD SP M-WLD SCO 30 min. Wellness and Fitness E M-FTW SCO 30 min. Winter Safety E M-097 SP M-097 SCO 30 min. Workplace Harassment in Industrial Facilities E M-059 SP M-059 SCO 30 min. Workplace Harassment in the Office E M-057 SP M-057 SCO 30 min. Workplace Stress E M SCO 30 min Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 2
3 HAZWOPER English English ID # Spanish Spanish ID# SCORM 1.2 Course Length Accidental Release Measures and Spill Cleanup Procedures E M-ACC SCO 45 min. Dealing with the Media in Emergency Situations E M-DAL SCO 45 min. Decontamination Procedures E M-DEC SCO 45 min. Electrical Safety in HAZMAT Environments E M SCO 45 min. Exposure Monitoring and Medical Surveillance E M-EMM SCO 45 min. Handling Hazardous Materials E M SCO 45 min. HAZMAT Labeling E M-HAL SCO 45 min. HAZWOPER Confined Space Entry E M SCO 45 min. HAZWOPER Fire Prevention E M SCO 45 min. HAZWOPER Heat Stress E M SCO 45 min. HAZWOPER Personal Protective Equipment E M-CPE SCO 45 min. HAZWOPER Safety Orientation E M SCO 45 min. Introduction to HAZWOPER Retraining E M SCO 45 min. Medical Surveillance Programs E M-MED SCO 45 min. Monitoring Procedures and Equipment E M-MON SCO 45 min. Personal Protective Equipment and Decontamination E M SCO 45 min. Procedures Respiratory Protection and Safety E M SCO 45 min. Site Safety and Health Plan E M SCO 45 min. The ANSI Material Safety Data Sheet E M-H SCO 45 min. Safety Data Sheets in HAZWOPER Environments E M SCO 45 min. The Emergency Response Plan E M SCO 45 min. Understanding Chemical Hazards E M SCO 45 min. Understanding HAZWOPER E M SCO 45 min. Work Practices and Engineering Controls E M SCO 45 min. LABORATORY SAFETY Electrical Safety in the Laboratory E M SCO 30 min. Flammables and Explosives in the Laboratory E M SCO 30 min. GHS Safety Data Sheets in the Laboratory E M SCO 30 min. Handling Compressed Gas Cylinders in the Laboratory E M SCO 30 min. Laboratory Ergonomics E M SCO 30 min. Laboratory Hoods E M SCO 30 min. Orientation to Laboratory Safety E M SCO 30 min. OSHA Formaldehyde Standard E M SCO 30 min. Planning for Laboratory Emergencies E M SCO 30 min. Preventing Contamination in the Laboratory E M SCO 30 min. Safe Handling of Laboratory Glassware E M SCO 30 min. Safety Showers and Eye Washes in the Laboratory E M SCO 30 min. Using Material Safety Data Sheets in the Laboratory E M SCO 30 min Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 3
4 REGULATORY SAFETY English English ID # Spanish Spanish ID# SCORM 1.2 Course Length Aerial Lifts in Industrial and Construction Environments E M-171 SP M-171 SCO 45 min. Asbestos Awareness E M-ASL SCO 45 min. Bloodborne Pathogens in Commercial and Industrial Facilities E M-214 SP M-B2P SCO 45 min. Bloodborne Pathogens in First Response Environments E M-B3F SP M-B3F SCO 45 min. Bloodborne Pathogens in Healthcare Facilities E M-B3H SP M-B3H SCO 45 min. Confined Space Entry E M SCO 45 min. DOT HAZMAT General Awareness E M-173 SP M-173 SCO 45 min. DOT HAZMAT Safety Training E M-174 SP M-174 SCO 45 min. DOT HAZMAT Security Awareness E M-175 SP M-175 SCO 45 min. DOT In-Depth HAZMAT Security E M-176 SP M-176 SCO 45 min. Emergency Planning E M-226 SP M-068 SCO 45 min. Forklift/Powered Industrial Truck Safety E M-K2S SP M-K2S SCO 45 min. GHS Container Labeling E M-156 SP M-156 SCO 45 min. GHS Safety Data Sheets E M-155 SP M-155 SCO 45 min. Guarding Against Tuberculosis as a First Responder E M-TLF SCO 45 min. Guarding Against Tuberculosis in Healthcare Facilities E M-TLH SCO 45 min. Guarding Against Tuberculosis in Institutional Environments E M-TLI SCO 45 min. Hazard Communication in the Hospitality Industry E M-170 SP M-170 SCO 45 min. Hazard Communication in Auto Service Facilities E M-167 SP M-167 SCO 45 min. Hazard Communication in Cleaning and Maintenance E M-168 SP M-168 SCO 45 min. Facilities Hazard Communication in Healthcare Facilities E M-169 SP M-169 SCO 45 min. Hazard Communication in Industrial Facilities E M-165 SP M-165 SCO 45 min. Hearing Conservation and Safety E M-HES SP M-HES SCO 45 min. Indoor Air Quality E M-AQL SCO 45 min. Introduction to GHS E M-154 SP M-154 SCO 45 min. Lock-Out/Tag-Out E M-069 SP M-069 SCO 45 min. OSHA Laboratory Standard E M-LAS SCO 45 min. OSHA Lead Standard in General Industry E M-LDL SP M-LDL SCO 45 min. OSHA Recordkeeping for Employees E M-017 SP M-017 SCO 45 min. OSHA Recordkeeping for Managers and Supervisors E M SCO 45 min. Personal Protective Equipment E M-PPS SP M-PPS SCO 45 min. Respiratory Protection and Safety E M-056 SP M-056 SCO 45 min. Scissor Lifts in Industrial and Construction Environments E M-172 SP M-172 SCO 45 min. Supported Scaffolding Safety E M-SPL SP M-SPL SCO 45 min. Suspended Scaffolding Safety E M-PNL SP M-PNL SCO 45 min Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 4
5 Construction Safety Crane Safety in Construction Environments (M-124) While there are many different types of cranes, they all have the ability to make many jobs much easier by lifting an enormous amount of weight. But they also share the potential for disaster when they are not operated safely. Cranerelated accidents can often be deadly, due to the cumbersome and heavy loads that are lifted. A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls, not much can be done to stop it, and there is little time for people to move safely out of the way. A coworker could be injured or killed, and expensive equipment or materials could be damaged or destroyed. This course is designed to remind employees that most crane-related accidents are caused by human error, and that employees are the key to helping prevent these incidents. Physical and mental preparation Equipment inspection Hazard assessment Boom cranes Jib cranes Overhead cranes General and operational safety devices Crane operations Hand signals Dealing with Drug and Alcohol Abuse for Employees in Construction Environments (M-150) An employee with an alcohol or drug problem can decrease productivity, create a hostile working environment and damage a company's good name. Worst of all, the actions of a worker who is under the influence may undermine a company's efforts to keep its employees safe. This course discusses the various types of substance abuse that may be found in the workplace, how they can affect an employee's work situation and what employees themselves can do to help keep their workplace drug and alcohol free. How substances are typically abused by employees Alcohol and other depressants, and their effects Stimulants, narcotics and hallucinogens, and their effects Alcohol and drug policies Helping people overcome substance abuse 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 5
6 Dealing with Drug and Alcohol Abuse for Managers and Supervisors in Construction Environments (M-151) An employee with an alcohol or drug problem can decrease productivity, create a hostile working environment and damage a company's good name. Worst of all, the actions of a worker who is under the influence may undermine a company's efforts to keep its employees safe. This course discusses the various forms of substance abuse that may be found in the workplace, how managers and supervisors can detect substance abuse problems, and what they should and shouldn't do if they discover a worker with a substance abuse problem. How substance abuse can affect a workplace Laws and regulations related to substance abuse The role of education and testing in preventing substance abuse Recognizing on-the-job substance abuse Electrocution Hazards in Construction Part I (M-152) The first in a two-part series on electrocution hazards, Electrocution Hazards in Construction Environments Part I Types of Hazards and How You Can Protect Yourself, discusses the major types of electrocution hazards, and how employees can protect themselves from electrical hazards and electrocution in construction environments. There are a number of causes of shock, electrical burns and electrocution. If the power to electrical equipment is not grounded, the grounding path has been broken, or there are live parts or bare wires, a fault current can travel through your body. Even when a piece of equipment or a tool is properly grounded, it can instantly change from safe to hazardous because of extreme conditions or rough treatment. Employees need to know what electrocution hazards to watch out for and how they can help protect themselves. Electrical hazards and electrocution Major types of electrocution hazards Power lines and GFCI's Power tools and extension cords Lock-out/tag-out 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 6
7 Electrocution Hazards in Construction Part II (M-153) The second in a two-part series on electrocution hazards, Electrocution Hazards in Construction Environments Part II Employer Requirements, discusses the major types of electrocution hazards, and how employees can protect themselves from electrical hazards and electrocution in construction environments, as well as employers' responsibilities in these areas. Construction sites can contain a number of potential electrical hazards. OSHA defines four types of hazards that are associated with electricity, and three types of injuries that result from them. Direct contact with electricity through a power source, cord or transmission line is the most common type of electrical hazard, and can occur in a number of ways. Employers are required to train workers regarding electrocution hazards and the measures that they should take to control the hazards. Employers must also put procedures into place so that workers can get answers to any questions that they have about working safely around electrocution hazards. Electrical hazards and electrocution Power lines and isolation Tools and equipment Assured Equipment Grounding Conductor Programs Lock-out/tag-out Employee training Eye Safety in Construction Environments (M-082) Our eyes are very fragile, and statistics show that eye injuries occur frequently in the workplace. This course reminds employees that eye injuries can easily happen to them and shows them how to prevent these injuries. Physiology of the eye How the eye functions Common eye injuries and how they are caused Short and long term effects of eye injuries Eye care and safety practices Selecting and using appropriate personal protective equipment Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 7
8 Fall Protection in Construction Environments (M-099) Falls are one of the leading causes of death each year in the United States. This course provides the information employees need to work safely in construction environments as it relates to fall protection and satisfies the major training requirements in the OSHA Standard on Fall Protection. The seriousness of fall hazards Types of environments where falls may occur The fall protection plan Concentrating and keeping a clear head The importance of housekeeping in preventing falls Measures that can be taken to protect against falls Protective equipment. First Aid in Construction Environments (M-084) A workplace injury can be painful, and can affect an employee's work performance, as well as their activities off the job. This course shows employees that knowing basic first aid procedures can often minimize the severity of an injury or even prevent a death. Cuts and bleeding Muscle pulls and sprains Burns Broken bones Shock AEDs (automated external defibrillators) Artificial respiration and CPR Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 8
9 GHS Labeling in Construction Environments (M-219) This course discusses the six types of information contained on a GHS label, and the differences between GHS labels and other types of chemical hazard labels. Created specifically to assist facilities in complying with the employee training requirements of OSHA's newly adopted GHS regulations, this course discusses how chemicals should be labeled under GHS. How the GHS changes chemical hazard labeling GHS labels' text elements GHS labels' pictograms Training and phase-in dates GHS: Safety Data Sheets in Construction Environments (M-220) This course reviews the composition of GHS Safety Data Sheets, the information that's contained in each section and how SDS's are different from Material Safety Data Sheets. Created specifically to assist facilities in complying with the employee training requirements of OSHA's newly adopted GHS regulations, this course discusses how chemicals should be labeled under GHS. Material Safety Data Sheets and GHS SDS's Materials and their hazards Hazardous materials emergencies Handling hazardous materials 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 9
10 Hand and Power Tool Safety in Construction Environments (M-076) In many types of businesses, hand and power tools are used every day. They make work easier and allow employees to be more efficient. However, many workers often fail to see the hazards these tools can present. This course shows employees how accidents can be significantly reduced by applying good general safety rules, and reviews the various hazards that are associated with the specific types of tools. Matching the tool to the job The importance of state of mind Personal protective equipment Good safety practices Tool care and maintenance Hand, Wrist and Finger Safety in Construction Environments (M-077) Our hands, wrists and fingers are constantly exposed to possible injury. Recognizing potential problems and taking steps to avoid them is important to all employees, no matter what their job. This course reminds employees how easy it is to injure their fingers, hands and wrists, and reviews what should be done to prevent these types of injuries from occurring. How the fingers, hand and wrist function Hazard identification Ergonomic considerations The importance of staying alert Using the right tools The role of machine guards First-aid and emergency treatment 2015 Grainger Safety Services, Inc eSafety 10
11 Hazard Communication in Construction Environments (M-221) This course both introduces employees to the Hazard Communication regulations and provides training on the various groups of chemicals found in the construction environment. Created specifically to assist construction facilities in complying with federal, state and municipal Hazard Communication regulations, the course addresses the major education and training requirements in these chemical hazard laws. Background of the regulation GHS Safety Data Sheets and container labels Toxins, corrosives and irritants Flammables, combustibles and gases Carcinogens and radiation Exposure situations Personal protective equipment and chemical storage Spills and clean-up Heat Stress in Construction Environments (M-095) Each year thousands of employees suffer the adverse effects of heat stress. Whether they work outdoors under the hot summer sun, or indoors with equipment and machinery that give off high levels of heat, employees need to know how to recognize and prevent heat stress and other heat-related health problems. This course reviews how heat affects the body, the steps employees can take to help prevent heat stress and elementary first aid that can be given to a worker who has been affected by a heat-related illness. Situations leading to heat-related illnesses Heat stress, heat exhaustion and heat stroke How the body reacts to heat Recognizing symptoms of heat stress Preventing heat-related illnesses First aid 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 11
12 Introduction to GHS for Construction Workers (M-222) This course reviews what the Globally Harmonized System is all about, why OSHA adopted the GHS, and the phase-in dates for implementing the GHS. Created specifically to assist facilities in complying with the employee training requirements of OSHA's newly adopted GHS regulations, this course discusses the Globally Harmonized System for the Classification and Labeling of Chemicals. What the Globally Harmonized System is Why OSHA adopted the GHS Hazard classification The Safety Data Sheet Container labeling (text elements) Container labeling (pictograms) Information and training GHS phase in dates Ladder Safety in Construction Environments (M-085) Ladders are one of the most commonly used pieces of equipment in almost any work environment. From common stepladders to sophisticated extension ladders, they can be found almost everywhere. As a result, ladder-related accidents occur frequently in many facilities. This course reminds employees to take the appropriate precautions when using ladders. Ladder selection, inspection and maintenance Proper set-up Overhead hazards Climbing and working safely Accidents and first aid 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 12
13 Personal Protective Equipment in Construction Environments (M-223) This course has been created specifically to involve employees in the process of understanding the proper use of personal protective equipment and to help facilities in fulfilling OSHA's Personal Protective Equipment (PPE) Standards (29 CFR, , 133, 134,135,136,137,138) training requirements. The course looks at why personal protective equipment is so important and reminds employees of what is available. A review of OSHA's PPE Standards PPE for eye and face hazards PPE for respiratory hazards PPE for head hazards PPE for foot hazards PPE to guard against electrical hazards PPE to guard against hand and finger hazards Rigging Safety in Construction Environments (M-125) We have all heard the phrase A chain is only as strong as its weakest link. When it comes to crane operations, rigging can often be that weak link. How a load is attached to a crane can make the difference between a successful lift and an unfortunate accident. And rigging-related accidents can often be deadly, due to the large and heavy loads that are lifted. This course is designed to remind employees that most crane-related accidents are caused by human error, and that employees are the key to help prevent these incidents. Physical and mental preparation Personal protective equipment Equipment inspection Hazard assessment Slings Hitches Hand signals Load angles 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 13
14 Safe Lifting in Construction Environments (M-238) There are good reasons to consider how we lift and carry things, because there are right ways and wrong ways to do it. And what you don't know about them can hurt you. This course provides the information employees need to protect their backs when they are lifting and carrying, which is something we do all the time, and we normally don't think twice about it. The back s structure and function Preparing for a lift The mechanics of safe lifting Planning a carry Safety Orientation in Construction Environments (M-224) Thinking about safety should be as natural as thinking about other aspects of a job. This course addresses two of the most prominent safety issues confronting employers today, that of developing a good safety attitude in their employees, as well as providing introductory safety training. Developing safety awareness Basics of accident prevention Hazard evaluation Safety housekeeping Tool use and maintenance Use of personal protective equipment (PPE) 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 14
15 Slips, Trips and Falls in Construction Environments (M-149) Construction sites can be a virtual maze of slip, trip and fall hazards. This course shows employees the situations that can lead to slips, trips and falls in construction environments, and what they can do to avoid or prevent these accidents. Supported Scaffolding Safety in Construction Environments (M-074) This course helps facilities comply with OSHA's Scaffolding regulation. It helps employees understand the dangers of working with supported scaffolds, and how these risks can be minimized by knowing the correct ways to erect, maintain and use scaffolding equipment. Responsibilities of a scaffold expert Creating a level and stable foundation Platforms and planking The danger of power lines Ramps and walkways Platform hazards Personal fall arrest systems Guarding against falling objects 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 15
16 Suspended Scaffolding Safety in Construction Environments (M-075) This course helps facilities comply with OSHA's Scaffolding regulation. It helps employees understand the dangers of working with suspended scaffolds, and how these risks can be minimized by knowing the correct ways to erect, maintain and use scaffolding equipment. Responsibilities of a scaffold expert Platform hazards The danger of power lines Personal fall arrest systems Guarding against falling objects Working with Lead Exposure in Construction Environments (M-225) This course addresses the major areas of employee training required by the regulations. Because of the widespread historical use of lead-based paints, as well as other materials containing lead, this program is useful to a number of different groups including building/construction companies, manufacturers, recyclers and many others. Created specifically for OSHA's Lead Standard (both the General Industrial Standard as well as the Interim Final Rule for Construction), the course is designed for employees in construction environments where lead and lead-based materials are found. Contents of the standard Measurement concepts to include Permissible Exposure Limits (PEL), Time Weighted Average (TWA), and action levels Exposure assessment and monitoring Methods of compliance Hygiene and housekeeping Medical surveillance 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 16
17 General Safety Accident Investigation (M-AIN) While many accidents seem to happen for obvious reasons, there may be things that contribute to an accident which are not always apparent. That is why it is vital to conduct accident investigations. This course shows employees the steps that are taken in an accident investigation. It also points out that while an investigation's focus is to determine the cause of an accident, the overall goal is to prevent similar accidents from happening again. The goals of an accident investigation Securing an accident scene Root-cause analysis The importance of investigative interviews Assisting in an accident investigation The importance of warning signs in accident prevention Reporting near misses The role of policies Equipment and training in accident prevention ANSI Material Safety Data Sheet (M-066) This course has been specifically created to educate employees about the ANSI MSDS format. The American National Standards Institute (ANSI), working with the Chemical Manufacturer's Association (CMA), has developed the first standard format for Material Safety Data Sheets. While this new MSDS format is not required under the OSHA Hazard Communication Standard, OSHA is encouraging its use. Perhaps as important, most of the large chemical manufacturers in the United States appear to be adopting this MSDS format. The MSDS in working with hazardous chemicals The MSDS's role in the Hazard Communication Standard The advantages of the ANSI format The four basic questions the ANSI MSDS is designed to answer Review of the sections in the ANSI MSDS format How to use paper and computer-based MSDS resources 2015 Grainger Safety Services, Inc eSafety 17
18 Back Safety (M-043) Back injuries are frequently caused by common activities experienced both on and off the job such as lifting, climbing, reaching, etc. This course emphasizes the importance of overall back care, both on and off the job, including exercises and weight control. How the back works Common types and causes of back injuries Effects of back injuries Injury prevention and safety practices Proper lifting techniques Basic back exercises Computer Workstation Safety (M-234) Computers can be found in all areas of a facility. From the office to the loading dock, most of today's business is conducted with the help of computers. And just like any other type of equipment, employees need to know what potential problems may be involved in working with computers and how to use them safely. This course reviews the safe use of computers, and offers practical solutions to many potential problems. Organization of work materials Maintaining neutral positions Positioning the back and torso Avoiding and relieving eyestrain Avoiding and relieving muscle strain Tension and stress reducing exercises 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 18
19 Conducting Safety Audits (M-SAU) A single workplace accident can be devastating. Someone can be injured or even killed. Property, equipment or materials can be damaged or destroyed. Work could come to a complete stand-still. All of these things can happen if efforts are not made to protect employees. One way to accomplish this is to conduct a safety audit. This is an examination of the work area to make sure it is as safe as possible and all potential hazards are corrected or removed. A workplace analysis Administrative and engineering controls Personal protective equipment The equipment maintenance program Emergency response procedures Accident investigation A safety self-assessment Conflict Resolution in Industrial Facilities (M-060) Conflict in the workplace is inevitable. Anytime two or more people come together, they will eventually disagree about something. While some conflict can be healthy, it is often an indication that there is something wrong. If conflict is allowed to fester and grow without a resolution, it can lead to serious problems such as threats and even physical violence. This course discusses the techniques and strategies that can be used to limit the damage and disruption conflict can sometimes cause in the workplace. The consequences of conflict and how it can disrupt the workplace How resolving workplace conflict is an integral part of everyone's job Common causes of workplace conflict and how to recognize them Diffusing disagreements before they get out of hand The damage that escalating conflict and violence can do to an organization How collaboration can be a valuable tool in resolving conflicts How to apply proven conflict resolution techniques and strategies 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 19
20 Conflict Resolution in the Office (M-058) Conflict in the workplace is inevitable. Anytime two or more people come together, they will eventually disagree about something. While some conflict can be healthy, it is often an indication that there is something wrong. If conflict is allowed to fester and grow without a resolution, it can lead to serious problems such as threats and even physical violence. This course discusses the techniques and strategies that can be used to limit the damage and disruption conflict can sometimes cause in the workplace. The consequences of conflict and how it can disrupt the workplace How resolving workplace conflict is an integral part of everyone's job Common causes of workplace conflict and how to recognize them Diffusing disagreements before they get out of hand The damage that escalating conflict and violence can do to an organization How collaboration can be a valuable tool in resolving conflicts How to apply proven conflict resolution techniques and strategies Crane Safety (M-122) While there are many different types of cranes, they all have the ability to make many jobs much easier by lifting an enormous amount weight. But they also share the potential for disaster when they are not operated safely. Cranerelated accidents can often be deadly, due to the cumbersome and heavy loads that are lifted. A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls, not much can be done to stop it, and there is little time for people to move safely out of the way. A coworker could be injured or killed, and expensive equipment or materials could be damaged or destroyed. This course is designed to remind employees that most crane-related accidents are caused by human error, and that employees are the key to helping prevent these incidents. Physical and mental preparation Equipment inspection Hazard assessment Boom cranes Jib cranes Overhead cranes General and operational safety devices Crane operations Hand signals 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 20
21 Dealing with Drug and Alcohol Abuse for Employees (M-052) An employee with an alcohol or drug problem can decrease productivity, create a hostile working environment and damage a company's good name. Worst of all, the actions of a worker who is under the influence can undermine a company's efforts to keep people safe. This course discusses the various types of substance abuse that are found in the workplace, how they can affect an employee's work situation and what employees themselves can do to help keep their workplace drug and alcohol free. How substances are typically abused by employees Alcohol and other depressants, and their effects Stimulants, narcotics and hallucinogens, and their effects Alcohol and drug policies Helping people overcome substance abuse Dealing with Drug and Alcohol Abuse for Managers and Supervisors (M-053) An employee with an alcohol or drug problem can decrease productivity, create a hostile working environment and damage a company's good name. Worst of all, the actions of a worker who is under the influence can undermine a company's efforts to keep people safe. This course discusses the various forms of substance abuse that are typically found in the workplace, how managers and supervisors can detect substance abuse problems, and what they should and shouldn't do if they discover a worker with a substance abuse problem. How substance abuse can affect a workplace Laws and regulations related to substance abuse The role of education and testing in preventing substance abuse Recognizing on-the-job substance abuse 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 21
22 Dealing with Hazardous Spills (M-206) Hazardous materials are a part of many work situations. They can be found in many different types of facilities and on many job sites from manufacturing and construction to retail and office environments. Some organizations have to deal with hazardous materials as part of their daily business, and have detailed plans and highly trained workers to handle a sudden spill. But other facilities handle these materials infrequently, and may not have given much thought to what must be done in case of a spill. This course is designed to help employees who seldom have to face the dangers of a hazardous spill deal with a cleanup situation. The hazard communication plan The emergency response plan The five levels of OSHA's HAZMAT training Initial spill response Spill containment Instruments used to identify chemicals involved in a spill Additional hazards of a spill site Distracted Driving (M-229) We've all seen them, drivers on the road drinking a cup of coffee, putting on make-up, eating a snack and talking on their cell phones. More and more people every day, it seems, are doing something other than paying attention to traffic when they're behind the wheel. It's called distracted driving. This course provides the information employees need to drive cars, vans, and small trucks safely, both on and off the job. The cost of distracted driving Multi-tasking Technology and distraction Eliminating distractions before you drive Cell phones Fighting distraction on the road 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 22
23 Driving Defensively (M-231) When you drive defensively, you're always looking for trouble. Not because you want to cause it, but so you can defend yourself against other drivers, and the trouble they can cause. Whether they're speeding, tailgating, or just not paying attention to what they're doing, other drivers can put you at risk. This course provides the information employees need to drive cars, vans, and small trucks safely, both on and off the job. The fundamentals of driving defensively Dealing with distracted drivers Coping with aggressive drivers Using your headlights Driving safely in bad weather Handling a blowout Sharing the road with trucks and buses Driving Safety (M-131) Many employees travel the roads on company business every day in cars, vans or trucks. This course provides the information employees need to drive them safely. Inspecting the vehicle Adjusting seats, mirrors and other equipment Wearing seatbelts The importance of mental preparation and concentration Creating a safety cushion around your vehicle Road rage Distracted driving (texting) Passing another vehicle Driving at night Adverse weather conditions Skidding and hydro-planing What to do in case of an accident 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 23
24 Driving Safety: The Basics (M-230) We do so much driving that it's easy to forget how dangerous it can be. Every year accidents claim almost 35,000 lives and cause more than two million serious injuries. Fortunately, most accidents can be prevented. People can avoid trouble on the road if they approach their driving with the right skills, a well-maintained vehicle and a safety first attitude. This course provides information employees need to drive cars, vans, and small trucks safely, both on and off the job. Preparing to drive safely The fundamentals of safe driving Driving with other vehicles Driving at night and in bad weather Distracted driving and road rage Handling an emergency Electrical Safety (M-098) Electricity is all around us. It lights up our homes, powers much of the machinery and equipment that we use, and runs many of our tools. We are so used to it; most employees take it for granted. Yet electricity can also be dangerous. Employees need to know how electricity works, and what they should do to help protect themselves from its hazards. This course provides the information employees need to work safely around low voltage electricity. The course also satisfies the OSHA training requirements under 29 CFR Part for non-qualified employees. How electricity works Fuses and circuit breakers Grounding and GFIs Safe work practices Outlets, plugs and extension cords Working with electrical equipment Using ladders around electricity Electrical emergencies 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 24
25 Eye Safety (M-064) Our eyes are very fragile, and statistics show that eye injuries occur frequently in the workplace. This course reminds employees that eye injuries can easily happen to them and shows them how to prevent these injuries. Physiology of the eye How the eye functions Common eye injuries and how they are caused Short and long term effects of eye injuries Eye care and safety practices Selecting and using appropriate personal protective equipment Fall Protection (M-FAL) Falls are one of the leading causes of death each year in the United States. This course provides the information employees need to work safely as it relates to fall protection and satisfies the major training requirements in the OSHA Standard on Fall Protection. The seriousness of fall hazards Types of environments where falls may occur The fall protection plan Concentrating and keeping a clear head The importance of housekeeping in preventing falls Measures that can be taken to protect against falls Protective equipment 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 25
26 Fire Prevention in Healthcare (M-207) Every year fires in healthcare facilities cause millions of dollars in damage and result in numerous employee injuries and fatalities. This course looks at how fires in healthcare facilities start, and what can be done to prevent them, as well as what employees should do in case of a fire emergency. Common causes of fires in healthcare facilities The concept of flashpoint Preventing fires Fire extinguishers Handling flammable materials Evacuation and other employee responsibilities First aid Fire Prevention in the Office (M-208) Every year office fires cause millions of dollars in damage and result in numerous employee injuries and fatalities. This course looks at how fires in offices start, and what can be done to prevent them, as well as what employees should do in case of a fire emergency. Common causes of workplace fires The concept of flashpoint The importance of good housekeeping Preventing office fires Fire extinguishers Evacuation and other employee responsibilities First aid 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 26
27 First Aid (M-209) A workplace injury can be painful, and can affect an employee's work performance, as well as their activities off the job. This course shows employees that knowing basic first aid procedures can often minimize the severity of an injury or even prevent a death. Cuts and bleeding Muscle pulls and sprains Burns Broken bones Shock AEDs (automated external defibrillators) Artificial respiration and CPR Hand and Power Tool Safety (M-044) In many types of businesses, hand and power tools are used every day. They make work easier and allow employees to be more efficient. However, many workers often fail to see the hazards these tools can present. This course shows employees how many accidents can be significantly reduced by applying good general safety rules, and reviews the various hazards that are associated with the specific types of tools. Matching the tool to the job The importance of state of mind Personal protective equipment Good safety practices Tool care and maintenance 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 27
28 Hand, Wrist and Finger Safety (M-067) Our hands, wrists and fingers are constantly exposed to possible injury. Recognizing potential problems and taking steps to avoid them is important to all employees, no matter what their job. This course reminds employees how easy it is to injure their fingers, hands and wrists, and reviews what should be done to prevent these types of injuries from occurring. How the fingers, hand and wrist function Hazard identification Ergonomic considerations The importance of staying alert Using the right tools The role of machine guards First aid and emergency treatment Handling a Sexual Harassment Investigation (M-049) This course looks at a company's legal responsibility to help prevent and deal with sexual harassment incidents; examines policies and procedures that should be followed when investigating allegations of sexual harassment and discusses how to interview apparent victims, alleged harassers and potential witnesses. Recognizing sexual harassment is only half the battle. If action isn't taken quickly, and the situation is not resolved fairly, a company can face lawsuits or hefty fines. A company's legal responsibility regarding sexual harassment Conducting an ethical investigation Beginning the investigation process Documenting harassment allegations Interviewing alleged harassers and witnesses 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 28
29 Handling Compressed Gas Cylinders (M-CGC) In today s work environments, compressed gas is used for many things: refrigeration, welding, heating and a number of other functions. Compressed gases can be dangerous, and employees who work with them need to know how to handle them properly. This course provides the information employees need to work safely when handling and using these products. Hazards associated with compressed gases Moving and transporting cylinders safely Positioning cylinders properly Proper hook-up procedures Safe storage practices Storage incompatibilities Hazardous Materials Labels (M-210) This course is designed to help employees understand the characteristics of different labeling systems and the ways that each convey information. By recognizing the differences and similarities of these systems, employees will be better prepared to work safely around hazardous materials. One important method for identifying hazardous materials is through the use of container labels. From bottles and drums to trucks and railcars, labels provide information about the contents of a container, as well as what to do and who to call in case of an emergency. Because this information is so critical for the safe handling and transporting of potentially dangerous substances, several organizations have developed labeling and placarding systems to communicate to employees about a container's contents. OSHA's hazard communication standard Types of containers requiring labels Information required on labels Department of Transportation (DOT) hazardous material classifications DOT label and placard requirements United Nations identification numbers The Hazardous Materials Identification System (HMIS) The National Fire Prevention Association (NFPA) labeling system Hazardous waste labeling 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 29
30 Heat Stress (M-093) Each year thousands of employees suffer the adverse effects of heat stress. Whether they work outdoors under the hot summer sun, or indoors with equipment and machinery that give off high levels of heat, these employees need to know how to recognize and prevent heat stress and other heat-related health problems. This course reviews how heat affects the body, the steps employees can take to prevent heat stress and elementary first aid that can be given to a worker who has been affected by a heat-related illness. Situations leading to heat-related illnesses Heat stress Heat exhaustion and heat stroke How the body reacts to heat Recognizing symptoms of heat stress Preventing heat-related illnesses First aid Industrial Ergonomics (M-065) Every job puts a different set of demands on the body. How this impacts employees, and what can be done to reduce or eliminate adverse effects, is an important safety issue. This course focuses on potential ergonomic problems in manufacturing, assembly and warehousing situations. The course shows employees how to recognize ergonomic problems, the potential adverse effects bad ergonomics can have, and practical solutions employees can use to help deal with ergonomic problems. Physiology of the body Parts of the body most effected by ergonomic problems Eyestrain Pragmatic preventative measures Correct use of equipment Exercises and stress release 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 30
31 Industrial Fire Prevention (M-211) Among all the safety problems employees can encounter, fire can be the most frightening. Every year industrial fires cause millions of dollars in damage and result in hundreds of employee injuries and fatalities. Yet many employees do not realize how their own actions can contribute to the risk of fire. This course looks at what causes industrial fires and what can be done to prevent them as well as what employees should do in case of a fire emergency. Common causes of workplace fires The concept of flashpoint The importance of good housekeeping Preventing industrial fires Fire extinguishers Evacuation and other employee responsibilities First aid Ladder Safety (M-080) Ladders are one of the most commonly used pieces of equipment in almost any work environment. From common stepladders to sophisticated extension ladders, they can be found almost everywhere. As a result, ladder-related accidents occur frequently in many facilities. This course reminds employees not to take using ladders for granted, and to take the appropriate precautions when using ladders. Ladder selection Inspection and maintenance Proper set-up Overhead hazards Climbing and working safely Accidents and first aid 2015 Grainger Safety Services, Inc eSafety grainger_safety_services@grainger.com 31
Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments
Accidents Causes and Prevention Accident Investigation For Everyone AED (Forerunner Model) Aerial Lifts in Industrial and Construction Environments Anatomy of an Accident Asbestos Awareness Asbestos Awareness
More informationSPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationGIVE ME FIVE VIDEO EXCHANGE CLUB
GIVE ME FIVE VIDEO EXCHANGE CLUB The following programs are available to club members on DVD. An (S) beside a title denotes availability in Spanish. ATTITUDES & MOTIVATION 4778 Take Action To Avoid Distraction
More informationSAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
More informationSAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
More informationPHCC Educational Foundation Safety Library OSHA General Industry
PHCC Educational Foundation Safety Library OSHA General Industry http://phccweb.360training.com Course Package General Industry Library Package 31.0 hours - $99.00 Package contains following courses: Beryllium
More informationHazard Recognition. Leader s Guide and Quiz
Hazard Recognition Leader s Guide and Quiz 4831 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
More informationOmega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
More informationWritten Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
More informationOnline Course and Lesson Objectives
Online Course and Lesson Objectives 2 0 0 6 - No Downtime - No Travel Expenses - Available 24/7 - Customization - High Retention - Scalability Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3
More informationSafeLandUSA - Syllabus
1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents
More information"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
More informationJJ Keller Safety Group Approved Courses
JJ Keller Safety Group Approved Courses For a complete list of course available through JJ Keller, please visit www.pinnacol.com/training Aerial Lifts in Industrial and Construction Environments (45-60
More informationCONSTRUCTION SAFETY SERIES: Safety Orientation
ERI Safety Videos Videos for Safety Meetings C001 CONSTRUCTION SAFETY SERIES: Safety Orientation Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information in this
More informationHAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING. Leader s Guide. ERI Safety Videos
2876 HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING Leader s Guide ERI Safety Videos HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader
More informationMid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted
More informationHealth and Safety Online Course Offerings Available through September 2018
Health and Safety Online Course Offerings Available through September 2018 These trainings are available for County and Regional Training and Development Consortium employees. County/City LMS Consortium
More informationCommitted to Providing Quality Safety Products and Services. Online Training
Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to
More informationOSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
More informationBRIT TEAM PLATEFORM Training Module List
BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct
More informationSUGGESTED TRAINING BY JOB TITLE
As of September 1, 2017 's Aide Art Coach or PE Science Substitute Shop Bus EMERGENCY MANAGEMENT Active Shooter: s S S 37 min Active Shooter: Staff S S S S S S S S S S S S S S S S S S S X 41 min Crisis
More information10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
More informationHazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.
Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled
More informationA Different Sort Of Knowledge Box
The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard
More informationHazard Communication Program
Hazard Communication Program I. Purpose, Applicability, and Scope A. Purpose: The purpose of this program is to ensure that the hazards of chemicals used in the workplace are evaluated, and those hazards
More informationHAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE
Page 1 of 10 HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE 1.0 SCOPE This Performance Assessment Guide for Hazardous Waste Operations and Emergency Response (HAZWOPER) will be used to carry out the
More information2106 PEDESTRIAN SAFETY IN INDUSTRY
ERI Safety Videos Videos for Safety Meetings 2106 PEDESTRIAN SAFETY IN INDUSTRY Leader s Guide 2000, ERI PRODUCTIONS INC. PEDESTRIAN SAFETY IN INDUSTRY This easy-to-use Leader s Guide is provided to assist
More informationWEBINARS. Hazard Communication
WEBINARS Hazard Communication Teaches employees the safe use and handling of hazardous chemicals in the workplace and how to protect themselves and others from those hazards. The modified standard provides
More information9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR
New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information
More informationEnvironmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY
Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY 2018 360training.com 888-360-TRNG (8764) www.360training.com About 360training.com 360training.com is a privately held,
More informationHealth and Safety Online Course Offerings Available through September 2020
Health and Safety Online Course Offerings Available through September 2020 These trainings are available for County and Regional Training and Development Consortium employees. County/City LMS Consortium
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationDEALING WITH HAZARDOUS SPILLS
1721 DEALING WITH HAZARDOUS SPILLS Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
More information"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationTraining Videos and Other Materials
Training Materials pg 1 Training Videos and Other Materials (Updated as of 9/23/2015) Title Format Category Length Description 12 Secrets to High Self-esteem CD Professional Includes workbook to print
More informationThere is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationNSC Online Workplace Training
ACCIDENT INVESTIGATION What is an Accident Investigation? Learn why an accident investigation is conducted and how to plan the investigation. Importance of gathering information Conducting an effective
More informationMAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE
MAFES Horticultural Facilities AREA-SPECIFIC SAFETY TRAINING GUIDANCE Each University of Maine employee, Faculty, graduate student, and undergraduate shall take the University of Maine Basic Safety Training
More informationA Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions
INSPECTION Health and CHECKLIST Safety Committees MAINTAINING SAFETY: A Health and Safety Tip Sheet for School Maintenance Staff 1 Maintenance and facilities staff members keep schools operational, safe,
More informationJanuary 25, TO: Our Clients. FROM: Will Johnson, Corporate Training Director. SUBJECT: Increase your bottom line, safety is profitable!
January 25, 2011 TO: Our Clients FROM: Will Johnson, Corporate Training Director SUBJECT: Increase your bottom line, safety is profitable! Ladies and Gentlemen: Workplace injuries and illnesses are preventable
More informationJob Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationSection 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationAccess Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
More informationCourse outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
More informationHazard Communication 29 CFR
Hazard Communication 29 CFR 1910.1200 Effective March 1, 2014 Subpart Z - Toxic & Hazardous Substances (1910.1000-1450) Hazard Communication - Written program 1200(e)(1) Hazard Communication - Information
More informationSITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION
SITE SAFETY PLAN AND NEW EMPLOYEE SAFETY ORIENTATION LOCATION: TSMF REVISED: 09-11-09 The following summarizes the orientation requirements for new employees at the facility. This plan augments the company
More informationNew Employee Safety Orientation. Presented by: Risk Management Services 2419 Cockrell, Dallas TX (972)
New Employee Safety Orientation Presented by: Risk Management Services 2419 Cockrell, Dallas TX 75215 (972) 925-4050 Welcome to a Culture of Safety! We want to help you work safely so you go home to your
More informationOn-Demand SAFETY Learning Library Catalog
On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com
More informationChemicals, ranging from water to acid, can be found just about everywhere. Some chemicals are more harmful than others. You must be aware of chemical hazards at all times, especially at work. At work,
More informationGlobally Harmonized System Hazard Communication
1 IEC NATIONAL Globally Harmonized System Hazard Communication Presented for National Electrical Safety Month 2 Presentation Goals Understand the new Globally Harmonized System Hazard (GHS) regulations
More informationLaboratory Safety Coordinator Meeting
Laboratory Safety Coordinator Meeting SUMMER 2013 News and Updates Welcome! Welcome New LSCs! Joseph Barbercheck- Associate Director Research Safety Andrea Voehringer Research Safety Specialist Good Byes!
More informationOSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None
Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,
More informationSafety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
More informationRequired Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
More informationLeader s Guide ERI Safety Videos
1717 SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting
More informationWORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More information"DOT HAZMAT SAFETY TRAINING"
LEADERS'S GUIDE 3109-LDG-E "DOT HAZMAT SAFETY TRAINING" For the Department of Transportation's 49 CFR 172.700 Subpart H Training Requirements THE "REGULATORY COMPLIANCE KIT" VIDEO SERIES This training
More informationSafety Training Source
Safety Training Source COURSE CATALOG APRIL 2018 MAP CLIENT SERVICES MAP@SAFETYNATIONAL.COM Table of Contents Accident Investigation - CLMI (Streaming Video)...5 Accident Investigation for Healthcare (Streaming
More informationRecommended Facilitator Notes: (read the following text out-loud to participants while showing this slide)
Slide 1 Confined Space Entry for General Industry These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The program is being
More informatione-compliance Training
e-compliance Training A Hazard Communication - October 2018 In 2012, OSHA modified the Hazard Communication Standard significantly. This was done to adopt the internationally used Globally Harmonized System
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationHazard Communication Plan (HCP) 29 CFR
Hazard Communication Plan (HCP) 29 CFR 1910.1200 METHODIST UNIVERSITY Environmental Health and Safety Office Hazard Communication Plan (HCP) 1910.1200 OSHA Hazard Communication Revision 3 May 2018 Estimated
More informationTEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Page 1 of 9 ISSUED: 5/00 REVISED: 08/06 Introduction Purpose: In accordance with applicable regulations and Temple University, this policy was developed to minimize exposure to Ethylene Oxide. Applicability
More information"DEALING WITH HAZARDOUS SPILLS"
PRESENTER'S GUIDE "DEALING WITH HAZARDOUS SPILLS" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM
More informationPresented By David F. Coble, MS, CSP. Safety Associates
OSHA Required Training Presented By David F. Coble, MS, CSP Coble, Taylor & Jones Safety Associates www.ctjsafety.com t David F. Coble, MS, CSP 36 years of safety experience including 12 y y p g years
More informationApproved for public release; distribution is unlimited.
EMERGENCY RESPONSE TO HAZARDOUS SUBSTANCE SPILLS AND RELEASES IN ARMY MILITARY TREATMENT FACILITIES TECHNICAL INFORMATION PAPER NO. 59-040-0915 PURPOSE. To provide compliance strategies for responding
More informationONLINE COURSE & LESSON OBJECTIVES
S Trainingweb ONLINE COURSE & LESSON OBJECTIVES 1310-0018 www.safetyontheweb.com 800.842.0466 Accident Investigation...3 Aerial Lift Safety...3 Air Emissions...3 Ammonia Safety...3 Asbestos Awareness...4
More informationCalifornia Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
More informationOSHA Updates for the Aviation Maintenance Technician. Bob Gould Bravo Golf Aviation
OSHA Updates for the Aviation Maintenance Technician Bob Gould Bravo Golf Aviation Bob Gould Who Am I? dba Bravo Golf Aviation 47 years in aviation and aircraft maintenance Retired from US Navy and industry
More informationONONDAGA COUNTY HEALTH DEPARTMENT Annual Training Hazard Communication Right to Know
ONONDAGA COUNTY HEALTH DEPARTMENT 2012 Annual Training Hazard Communication Right to Know HAZARD COMMUNICATION/ RIGHT TO KNOW STANDARD All employees should have information about any hazards from chemicals
More informationDVD LIST. Topic Video Name Number Vendor Year Time Description
Back Back Safety Update 1869 Training Network 2005 21 Four out of five people will experience some type of back problems during their lives. This excellent video emphasizes overall back care, including
More informationDefinitions found in several locations:
Definitions found in several locations: NFPA 70 - National Electric Code NFPA 70B Recommended Practice for Electrical Equipment Maintenance. NFPA 70E Electrical Safety in the Workplace OSHA 1910 Subpart
More informationIndustry Code: Alberta Small Employer OHS Legislated Requirements
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Services in this industry can
More informationAPPENDIX A. Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows
APPENDIX A Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows 1. In general, fall protection must be provided to construction workers who are
More informationAccident/Illness Prevention: 6 Keys
Accident/Illness Prevention: 6 Keys 1. Identification of hazards This is the foundation for our Accident Prevention Program. The boxes we have checked in the chart below, "Typical Work Site Hazards or
More informationTeST. Tokio Marine s e-safety Training 2016/2017 Catalog. 1 P age
TeST Tokio Marine s e-safety Training 2016/2017 Catalog In partnership with Health and Safety Institute, and Summit Training Source. Powered by OTIS Learning Management System. 1 P age OSHA Courses...
More informationRISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION
RISK MANAGEMENT AND SAFETY COURSE DESCRIPTION CATALOG & CONTACT INFORMATION Revised July 2015 COURSE INFORMATION This course description catalog describes courses offered by or through the Department of
More informationAccess Interactive Training Courses at Any Time
OSHA OSHA 10-& 30-hr Online Courses for General Industry Get your workers the DOL/OSHA training they need and save your company both time and money with Summit Training Source s online OSHA 10- and 30-Hour
More informationReducing Exposures From Confined Space Entry
Reducing Exposures From Confined Space Entry Over 1.6 million Americans work in Confined Spaces each year, and each year many accidents occur. Many of these accidents lead to serious injury or death from
More informationScope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
More informationNew Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
More informationCreative A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE PERFORMANCE WITH OUR. COMPREHENSIVE TRAINING SERVICES Revised November 2007
T h e D e l l G r o u p, I n c. Creative s o l u t i o n s for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised November
More informationSlips, Trips and Falls
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
More informationONLINE SAFETY TRAINING PROGRAM SUMMARY
Act First Safety provides best-in-class online/e-learning opportunities for employers and workers. With a selection of 17 programs, including eight (8) programs in French. Choosing Act First Safety is
More informationAccident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
More informationCreative Solutions for your compliance burdens
The Dell Group, Inc. Creative Solutions for your compliance burdens A LITTLE KNOWLEDGE IS A DANGEROUS THING... IMPROVE FORMANCE WITH OUR COMPREHENSIVE TRAINING SERVICES Revised September 2016 TRAINING
More informationLEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS
LEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS John W. Aird Workplace Safety & Prevention Services Ontario Petroleum Contractors Association March 8, 2016 Regulations Impacting your Businesses
More informationWHMIS 1988 & WHMIS 2015
WHMIS 2015 Awareness AN AWARENESS PROGRAM ON THE UPDATED Workplace Hazardous Materials Information System WHMIS 1988 & WHMIS 2015 WHMIS Overview 2 WHMIS Overview WHMIS first came into effect on October
More informationEMA, Inc. SITE SAFETY PLAN
EMA, Inc. SITE SAFETY PLAN A. SITE DESCRIPTION JOB NAME: JOB NUMBER: DATE: PLAN REVISION NUMBER: SITE ADDRESS: Additional Site / Project Information: B. SCOPE OF WORK 1. 2. 3. 4. 5. 6. C. ONSITE ORGANIZATION
More informationNPGA White Paper. OSHA Hazard Communication Standard
I. INTRODUCTION NPGA White Paper OSHA Hazard Communication Standard The purpose of this white paper is to describe the changes to the Occupational Safety and Health Administration (OSHA) Hazard Communication
More informationRISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
More informationCourse Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
More information"RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationhttp://www.tfrec.wsu.edu/pages/safety/safety_plan Contents TFREC Occupational Illness and Injury Prevention Plan Section 1. Facilities, Laws and Responsibilities, Disciplinary Policy, Organization and
More informationSOCIETY INSURANCE. RISK CONTROL Safety Video Catalog
SOCIETY INSURANCE RISK CONTROL Safety Video Catalog 150 Camelot Drive Fond du Lac, WI 54935 1-888-576-2438 Fax (920) 922-3710 Page 1 TABLE OF CONTENTS Instructions 3 Safety video lending agreement 4 DVD
More informationCarter Healthcare, Inc
Training Requirements for the Revised Hazard Communication Standard December 1st, 2013 Questions and Answers Q. What is the Globally Harmonized System? A. The Globally Harmonized System (GHS) is an international
More informationSafety and Health. Basic Foundations Series 719 LESSON PLANS LP
Safety and Health Basic Foundations Series 719 LESSON PLANS 710719LP P U B L I S H I N G Safety and Health 719 Instructor Support Material: Lesson Plans Schoolcraft P U B L I S H I N G 710719LP How to
More information