-eries, ightweight and umps umps shown, from top to bottom: -802, -842, -202, -142 xclusively from nerpac ylinder Matching hart For help in selecting the correct hand pump for your application, please refer to the ylinder Matching hart located in the Yellow ages. 276 peed hart To determine how a specific pump will operate your cylinder, see the ump/ylinder peed hart in the Yellow ages. 283 ightweight and compact design urable glass-filled nylon reservoir and nylon encapsulated aluminum pump base for maximum corrosion resistance Two-speed operation on most models reduces handle strokes by as much as 78% over single speed pumps ower handle effort to minimize operator fatigue Integral 4-way valve on -842 for operation of double-acting cylinders andle lock and lightweight construction for easy carrying arge oil capacities to power a wide range of cylinders or tools on-conductive fiberglass handle for operator safety Internal pressure relief valve for overload protection -20-25 Tank Kits When a return-to-tank port is required, the Tank Kits provide a 7 16-20 port at the rear of the reservoir. Fits -141, -142 Fits -202, -391, -392 X-101 and ump medium viscosity oil specially formulated for hand pumps. erforms well in low temperatures and requires less pumping effort than standard nerpac F blue oil. -392 in action with R-256 cylinders. ump Type ingle speed Two speed Usable 20 55 20 55 55 155 155-141 -391-142** -202-392** -802-842*** ressure * 70 www.enerpac.com isplacement per troke 1 st stage 2 nd stage 1 st stage 2 nd stage / / 400 400 / /.221.221.687 2.40 2.40.055.151.055.055.151.151.151 136 Max. andle ffort * ontact nerpac for applications where operating pressure is less than 10% of pressure rating. ** vailable as set, see note on top of next page. *** For use with double-acting cylinders. 72 85 78 63 93 95 95
ump and ylinder ets umps marked with an ** are available as sets (pump, cylinder, gauge, couplers and hose) for your ordering convenience. 52 ightweight and umps eries Release valve 38 - -141, -142, -202 50 - -391, -392 Reservoir : 20-155 in 3 G -141, -142, -202, -391, -392 Release Valve 50 M Flow at Rated ressure:.055-.15 in 3 /stroke Maximum Operating ressure: psi oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses. G 132-802 Q Valve ontrol 50 G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler. 144-842 G Q luminum Reservoir For applications where composite reservoirs may not be suitable, the -392 utilizes an extruded aluminum reservoir. lso included is a second handle for two-hand use. ontact nerpac for details. iston troke imensions.50.50.50 G M Q 7.31 13.56 7.31 13.56 13.56 13.30 13.30 13.25 2 13.25 20.06 2 21.75 21.75 1.44 1.44 1.44 1.78 1.78 3.37 3.93 3.37 3.37 3.93 5.25 5.25 1.31 1.31 1.39.81 ¼"-18 TF ⅜"-18 TF ¼"-18 TF ¼"-18 TF ⅜"-18 TF ⅜"-18 TF ⅜"-18 TF 12.56 20.56 12.56 15.75 20.56 20.75 20.75.75 1.19.75.75 1.19 2.19 2.19 5.63 7.00 5.63 5.69 7.00 9.00 9.00.63.63.63 3.75 4.75 3.75 3.75 7.12 7.12 3.25 3.25 6.02 6.02 1.40 1.44.28.28.41.41 4.5 9.0 5.3 7.5 9.0 18.0 22.0-141 -391-142** -202-392** -802-842*** 71
-eries, UTIM teel and umps hown from left to right: -77, -80, -84, -801, -39 The olution for Tough obs Two peed umps Recommended for applications where cylinder plunger must advance rapidly to contact load, and applications where greater oil capacities are required, such as multiple cylinder hook-ups. Reduced handle effort and ergonomic grip for less operator fatigue Two-speed operation for fast and easy operation (except -39) Vent free reservoir eliminates spills Quick grip handle allows for easy transport Integral reservoir over-pressurization protection ll steel construction, chrome plated plunger and wiper system for durable, long lasting performance 4-way valving on the 84 and -464 for operation of double-acting cylinders In the absence of a power supply, the -80 and ump offers a powerful solution. Foot ump onversion Kits onvert your 39, 77, 80, or 801 to foot power with the -11 Kit. Includes instructions for easy conversion. G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler. 144 4-Way ontrol Valve -84 and -464 feature a manual 4-way control valve, designed for use with one double-acting or two singleacting cylinders. For system set-up information: 278 ump Type Usable ressure * isplacement per troke 1 st stage 2 nd stage 1 st stage 2 nd stage Max. andle ffort ingle 41 41 134-39 -77-80** / 500 500 /.15.15.15 85 88 77 Twospeed 250-801 500.15 77 134-84*** 500.15 77 453 453-462 -464*** 7.69 7.69.29.29 110 110 * ontact nerpac for applications where operating pressure is less than 10% of pressure rating. ** vailable as a set, see note on next page. *** For use with double-acting cylinders. 72 www.enerpac.com
teel and umps eries 3 /8"-18TF Reservoir : 47-453 in 3-39, -77 Flow at Rated ressure:.15 -.29 in 3 /stroke Maximum Operating ressure: psi ⅜"-18TF 6.93 (-801 only) T Q ⅜"-18TF F xtra and umps -462 and -464 feature extra-large reservoirs and a high first-stage flow rate. These pumps are ideally suited for powering high-capacity cylinders. -80, -801, -84 ump and ylinder ets 3 /8"-18TF 74-80 is also available as a set (pump, cylinder, gauge, couplers and hose) for your ordering convenience. -462, -464 M R Q 52 ylinder Matching hart For help in selecting the correct hand pump for your application, please refer to the ylinder Matching hart located in the Yellow ages. 276 iston troke imensions F M Q R T 15.09 15.39 16.83 16.83 16.83 8.25 8.35 18.91 19.19 20.12 20.12 20.06 12.13 12.13 6.42 6.42 12.63 12.63 1.48 1.86 2.17 2.17 2.30 7.68 7.68 2.77 21.63 21.63 23.50 23.50 22.78 26.44 26.44 16.37 16.67 18.11 18.11 18.11.98.98 6.39 6.39 7.65 7.65 7.65 10.63 10.63 6.89 6.89 5.51 5.51 5.91 5.91 5.91 25.6 25.6 4.37 4.37 4.76 4.76 4.76 3.63 3.63 1.65 1.65 3.50 2.68 3.13 3.13 2.93 2.93 2.93 13.6 15.6 23.6 31.0 26.0 61.0 61.0-39 -77-80** -801-84*** -462-464*** 73
-eries, ow ressure and umps hown from left to right: -25, -51, -18 When ess Than psi is ll You eed -25 and -50 pump oil in both forward and reverse handle movement improving overall efficiency, ideal when mounting space is restricted xternal load-release valve Internal pressure-relief valve for overload protection -51 can be operated in horizontal and vertical position with pump head and oil outlet facing downwards X-101 and ump medium viscosity oil specially formulated for hand pumps. erforms well in low temperatures and requires less pumping effort than standard nerpac F blue oil. 136 G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler. -18 hand pump used for locking the rotating table for marble polishing. 144 ump Type Usable ressure isplacement per troke Max. andle ffort inglespeed 18 50-18 -25-50 -51 2,850 2,500 5,000 3,000 0.16 0.58 0.29 0.25 34 60 60 61 74 www.enerpac.com
ow ressure and umps eries -18 3 /8"-18TF Reservoir : 18- in 3 Flow at Rated ressure:.16-.58 in 3 /stroke Maximum Operating ressure: 2,500-5,000 psi 34 M 90 1/4"-18 TF oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses. 132-25, -50 M 180 3/8"- 18TF 42-51 -51 hand pumps used with R-series cylinders to keep wooden layers under pressure during lamination of plates. iston troke imensions M 8.70 6.00 6.00 2.06 12.44 6.82 6.82 3.63 6.00 6.00 7.12 9.43 9.43 7.88 1.48 2.25 15.17 24.00 9.98 1.16 6.39 26.94 26.94 6.31 7.88 7.88 5.06 5.51 4.37.33.40.40.34 11 36 37 12-18 -25-50 -51 75
ightweight ydraulic Foot ump hown: -392F eries Reservoir : 38 in 3 Flow at Rated ressure:.151 in 3 /stroke Maximum Operating ressure: psi ump and ylinder ets The -392F is available as sets (pump, cylinder, gauge, couplers and hose) for your ordering convenience. 52 Robust, durable and compact - teel frame for maximum stability - teel pumping handle - luminum reservoir Foot pedal lock and lightweight construction for portability Two-speed operation reduces foot pedal strokes arge foot-pad release valve for controlling load descent Internal pressure relief valve for overload protection oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses. 132 24.1-392F offers the advantage of handsfree operation to handle and control the tool or cylinder. Release valve 3/8"-18TF 1.2 20 18.4 7.8 2.3 8.1 Usable ressure isplacement per troke Max. andle ffort 30-392F *.687.151 125 1 16 * vailable as set, see note on this page. 76 www.enerpac.com 1st stage 2nd stage 1st stage 2nd stage iston troke
xtreme nvironment roducts hown from left to right: -142, -392, V-152V, V-66V, R256V, R-106V, R-53V R,, V eries ylinder : 5-25 tons troke: 2-6 inches Maximum Operating ressure: psi orrosion resistant, nickel-plated valves and cylinders tainless steel pump inserts will not corrode Viton eals provide heat and chemical resistance nodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps ump handles lock for easy carrying pplications Use nerpac xtreme nvironment roducts in wet environments such as food processing, pulp and paper, mining, construction and applications in high temperature or in welding areas. Multifluid and umps M-eries corrosion resistant hand pumps for low pressure filling and high pressure testing applications, suitable for a wide range of fluids. 77 YIR RT ylinder troke * ressure ollapsed eight xtended eight Outside iameter (ton) 5 10 10 25 3.0 2.0 6.0 6.0 R-53V R-102V R-106V R-256V 2.98 4.75 13.70 32.23 6.50 4.78 9.75 10.75 9.50 6.91 15.88 17.00 2.25 2.25 3.38 3.3 5.1 9.8 22.0 UM RT ump Type * Two peed 20 55 VV RT Valve Type -142-392 ressure / / * isplacement per troke 0.221 / 0.055 0.687 / 0.151 ressure Function ort imension 1/4"-18 nptf 3/8"-18 nptf iston troke ressure Manual heck Valve ressure Relief Valve V-66V V-152V heck +- 3% Repeatability 800-4.5 9.0 * For cylinder details see pages 7-9; for pump details see pages 70-71; for valve details see pages 146-147. 54 www.enerpac.com.50 4.5 9.0