V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing > > ypass function enables valve removal online > > SIL certified components and system > > Stainless steel visual status indicators and exhaust guards as standard > > International approvals > > Stainless steel construction > > Utilizing industry proven technology Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: / Direct solenoid operated poppet valves ypass: 5/ Manual operated spool valve (lockable) Mounting position: Valves vertical only Operating pressure:... 0 bar (... 5 psi) Flow: Standard valves 0... 90 l/min High flow valves 70... 80 l/min details see page Port size: G /, / NPT, G /, / NPT Additional filter: Installation of an in-line filter is recommended (in the direction of flow from the actuator to the RVM). Temperature range: Up to -0... +80 (-0... +76 F), see option selector page Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) Temperature solenoid: See option selector and corresponding valve data sheets Materials: Manifold and valve: stainless steel.0 (6 L) Seals: NR Internal parts: stainless steel.0 (6 L) oo with bypass valve exhaust guards and indicators oo with bypass valve exhaust guards and indicators oo with bypass valve *) exhaust guards and indicators W oo I I W oo I W oo I6 V W I V W V I5 I I I V V V W I V V I I I I 5 5 5 ypass valve I Indicators V Solenoid actuated valves W Shuttle valves ( OR function) *) for oo V & V = channel V = channel V = channel *) for oo V = channel V = channel V = channel V = channel Please have a look to instructions without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5 en 5..90.0
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Option selector V8 S000 0 Valve function Substitute out of normally closed out of normally closed out of normally closed 5 Flow Substitute Standard High Port sizes Substitute G / (standard flow system) / NPT (standard flow system) G / (high flow system) / NPT (high flow system) Valve type Solenoid Voltage able Substitute Protection Entry Standard flow YXANPHS Exia V d.c. M 0 x,5 0 Y0ANPHS Exd V d.c. M 0 x,5 0 YZANPHS Exmbe V d.c. M 0 x,5 0 Y0ANPHMS Exd 0 V a.c. M 0 x,5 0 YZANPHMS Exmbe 0 V a.c. M 0 x,5 05 YXANPHS Exia V d.c. / NPT 06 Y0ANPHS Exd V d.c. / NPT 07 YZANPHS Exmbe V d.c. / NPT 08 Y0ANPHMS Exd 0 V a.c. / NPT 09 YZANPHMS Exmbe 0 V a.c. / NPT 0 High flow Y0AMMHS Exd V d.c. M 0 x,5 YZAMMHS Exmbe V d.c. M 0 x,5 Y0AMMHMS Exd 0 V a.c. M 0 x,5 YZAMMHMS Exmbe 0 V a.c. M 0 x,5 5 Y0AMMHS Exd V d.c. / NPT 7 YZAMMHS Exmbe V d.c. / NPT 8 Y0AMMHMS Exd 0 V a.c. / NPT 9 YZAMMHMS Exmbe 0 V a.c. / NPT 0 Note; Please advise when ordering if SA certification is required ountry of manufacture Norgren internal use Indicators Visual valve status indicators in stainless steel - standard option; to be included in he scope of supply Visual valve status indicators in plastic - optional; to be included in the scope of supply No valve status indicator optional; replaced with plugs (stainless steel) Temperature/ Pressure range -0... +80 /,5... 0 bar +... +66... 0 bar (... 5 psi) Substitute Silencers Temperature Substitute Exhaust guard (standard) -55...+80 0 Plastic silencers to replace -0...+80 exhaust guards Stainless steel silencers to -0...+60 replace exhaust guards ypass valve Temperature Substitute Stainless steel -0... +60 Stainless steel -5... +80 0 Flow rates and valve combinations Flow direction (port to port) Standard flow systems ypass mode Operation mode High flow systems ypass mode Operation mode oo 9709 x Y*ANPH*S 9709 x Y*AMMH*S» *) [l/min] 950 0 50 70» *) [l/min] 70... 00 00... 600 oo 9709 x Y*ANPH*S 9709 x Y*AMMH*S» *) [l/min] 950 90 50 80» *) [l/min] 60... 00 500... 600 oo 9709 x Y*ANPH*S 9709 x Y*AMMH*S» *) [l/min] 950 0 50 70» *) [l/min] 60... 00 500... 600 *) Flow characteristics conforms to ISO658 from port (bypass valve) to port (sub-base) [6» 5 bar], see page *) Flow characteristics conforms to ISO658 from port (sub-base) to port (sub-base or bypass valve) [0» 0 bar], see page en 5..90.0 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Standard and optional accessories 9 0 8 Accessories - Standard (Included in the scope of supply) Exhaust guard *) Visual indicators (stainless steel) 8 Accessories - Optional Other silencers, plastic indicator and plugs Silencer (stainless steel) *) Silencer (plastic) *) Visual indicators (plastic) Adaptor 9 0 Plug plus Sealing washer Page Page 06 (G /, / NPT) 779-6 (G /) 779-60 (/ NPT) 06 (G /, / NPT) *) For indoors use *) For outdoors use Page Page Page Page 006 (G /) M/S (G /) 5VS--000 (/8 NPT) 0669 (G /, stainless steel) 06678 (/ NPT) /S (/ NPT) Adapter (/8 NPT to / NPT) *) 06808 (/ NPT, stainless steel) 008 (G /) M/S (G /) 06659 (stainless steel) Sealing washer *) 06679 (/ NPT) /S (/ NPT) 066085 (plastic) *) For indoors use; *) For outdoors use; *) Must be ordered separately; *) Must be ordered separately for G thread only 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.0
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability oo and oo with bypass (standard flow) Weight: 9 kg aluminium sub-base only, valves and accessories see refer page 0 9 5 0 M8 0 0 90,5 90 ~ 9 ~ 60 9 5 0 9 88,5 7 5 05 0 5 98 8 65,5 57,5 0 70 7,5 7 8 50 5 Valve Y*ANPHS and Y*ANPHS series Outlet port G / or / NPT Exhaust guard (sub-base), ports G / or / NPT ypass valve 9709 series 5 Exhaust guard (bypass valve), ports G / or / NPT 7 Inlet port G / or / NPT 8 Visual indicator, stainless steel as standard 9 Mounting holes 0 Mounting threads en 5..90.0 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability oo with bypass (standard flow) Weight: 8,7 kg sub-base only, valves and accessories see refer page A 5 0 9 5 60 ø9 0 0 0 M8 80 0 75 95 7,5 0 9 9 88,5 56 A 90 0 90,5 98 8 86 8 65,5 57,5 0 70 ~ ~ 7 8 50 5 Valve Y*ANPHS and Y*ANPHS series Outlet port G / or / NPT Exhaust guard (sub-base), ports G / or / NPT ypass valve 9709 series 5 Exhaust guard (bypass valve), ports G / or / NPT 7 Inlet port G / or / NPT 8 Visual indicator, stainless steel as standard 9 Mounting holes 0 Mounting threads 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.05
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability oo and oo with bypass (high flow) Weight: 9 kg sub-base only, valves and accessories see refer page 0 07 5 0 M8 05 0 90 06 ~ ~ 9 60 ø9 0 5 5 05 0 9,5 75 7,5 60,5 70 09,5 7 7 0 (5) 8 50 5 Valve Y*AMMHS and Y*AMMHS series Outlet port G / or / NPT Exhaust guard (sub-base), ports G / or / NPT ypass valve 9709 series 5 Exhaust guard (bypass valve), ports G / or / NPT 7 Inlet port G / or / NPT 8 Visual indicator, stainless steel as standard 9 Mounting holes 0 Additional mounting threads en 5..90.06 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
90 V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability oo with bypass (high flow) Weight: 7,9 kg sub-base only, valves and accessories see refer page 0 5 0 05 0 M8 55 0 5 60 ø9 07 70 9 A 09,5 55 80 50 0 5 50,5 0 ~ 7 A 06 ~ ~ 7 8 9,5 75 75 75 77,5 60 5 Valve Y*AMMHS and Y*AMMHS series Outlet port G / or / NPT Exhaust guard (sub-base), ports G / or / NPT ypass valve 9709 series 5 Exhaust guard (bypass valve), ports G / or / NPT 7 Inlet port G / or / NPT 8 Visual indicator, stainless steel as standard 9 Mounting holes 0 Mounting threads 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.07
Y*ANPH*S standard flow valve > > Standard flow range (600 l/min) > > Direct acting / spring return to safe condition > > ertifications: IEEx, ATEX, FM, SA, GOST-R, GOST-K, OE, IN-METRO, KOSHA > > Suited for outdoor use under critical environment conditions (see solenoid list) Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: / Direct solenoid operated poppet valves Port size: Flanged Orifice: 5 mm Operating pressure: 0... bar (0... 7 psi) (0... 0 bar (0... 5 psi) with SA certification) Fluid/AmbientTemperature: See table below Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) For outdoor installation please protect all connections against moisture ingress! Materials: ody: stainless steel.0 (6 L) oil housing: stainless steel.0 (6 L) Seals: NR Internal parts: stainless steel.0 (6 L) Technical data Symbol Power consumption Rated current ertifications Temperature range Electrical Model V d.c. 0 V a.c. V d.c. 0 V a.c. Media Ambient connection (W) (VA) (ma) (ma) FM ATEX ( ) ( ) (conduit) 0, 5 Ex II GD, Ex ia II -55 +69 T6 (-55 +50 ), T (-55 +69 ) M 0 YXANPHS 5 lass, Divison, Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) M 0 Y0ANPHS Groups, and D 5 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) M 0 YZANPHS,5 0 lass, Divison, Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) M 0 Y0ANPHMS Groups, and D,5 0 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) M 0 YZANPHMS 0, 5 Ex II GD, Ex ia II -55 +69 T6 (-55 +50 ), T (-55 +69 ) / NPT YXANPHS 5 lass, Divison, Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) / NPT Y0ANPHS Groups, and D 5 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) / NPT YZANPHS,5 0 lass, Divison, Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) / NPT Y0ANPHMS Groups, and D,5 0 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) / NPT YZANPHMS en 5..90.08 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
Y*ANPH*S standard flow valve 50 ø59 ø5,5 8 6 6 57 8,5 ø9,5 0 6 6 6 ø9 6 6 Electrical connection M0 x,5 or / NPT Ports plugged G /: Hexagon head plug / NPT: Hexagon socket set plug ircuit diagrams 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.09
Y*AMMH*S high flow valves > > High flow range (500 l/min) > > Direct acting / spring return to safe condition > > Suited for outdoor use under critical environment conditions (see solenoid list) > > ertifications: IEEx, ATEX, FM, SA, GOST-R, GOST-K, OE, IN-METRO, KOSHA Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: / Direct solenoid operated poppet valves Port size: Flanged Orifice: 8 mm Operating pressure: 0... bar (0... 7 psi) (0... 0 bar (0... 5 psi) SA) Fluid/Ambient temperature: See table below Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) For outdoor installation please protect all connections against moisture ingress! Materials: ody: stainless steel.0 (6 L) oil housing: stainless steel.0 (6 L) Seals: NR Internal parts: stainless steel.0 (6 L) Technical data Symbol Power consumption V d.c. 0 V a.c. (W) (VA) Rated current ertifications V d.c. 0 V a.c. (ma) (ma) FM 7,8 5 lass, Divison, Groups, and D Temperature range Electrical Model Media Ambient connection ATEX ( ) ( ) (conduit) Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) M 0 Y0AMMHS 7,8 5 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) M 0 YZAMMHS 8,5 79 lass, Divison, Groups, and D Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) M 0 Y0AMMHMS 8,5 79 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) M 0 YZAMMHMS 7,8 5 lass, Divison, Groups, and D Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) / NPT Y0AMMHS 7,8 5 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) / NPT YZAMMHS 8,5 79 lass, Divison, Groups, and D Ex II GD, Ex d II -55 +90 T6 (-55 +50 ), T (-55 +90 ) / NPT Y0AMMHMS 8,5 79 Ex mbe II GD, Ex mbe II -55 +90 T (-55 +80 ) / NPT YZAMMHMS en 5..90.0 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
Y*AMMH*S high flow valves 50 ø59 7 5,5 8 7 7,5, 75 0 7,5 7 0 59 6,5 Electrical connection M0 x,5 or / NPT ircuit diagrams 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.
9709 bypass valve for standard and high flow systems > > No open port cross over position during lever movement > > Simple design of soft seal spool system > > Reliable operation even with minimal air flow > > Padlock with two keys > > Lockable manual operator with detent as standard Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: Manual actuated spool valves Port size: see below, according to select system (standard flow or high flow) Operating pressure: 0... 0 bar Fluid/Ambient temperature: -0... +80 (-0... +76 F), Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) For outdoor installation please protect all connections against moisture ingress! Materials: Housing: hard anodized aluminium.065 or stainless stainless steel.0 (6 L) Seals: NR (special perbunan) or HNR Technical data Temperature range: -0... +60 Symbol 5 Port size Flow Material Weight Dimension Model, and 5 and housing seals (kg) No. G/ flange standard stainless steel NR,0 970907 / NPT flange standard stainless steel NR,0 9709 G/ flange high stainless steel NR,0 970909 / NPT flange high stainless steel NR,0 9709 Temperature range: -5... +80 Symbol 5 Port size Flow Material Weight Dimension Model, and 5 and housing seals (kg) No. G/ flange standard stainless steel HNR,0 97096 / NPT flange standard stainless steel HNR,0 97090 G/ flange high stainless steel HNR,0 97098 / NPT flange high stainless steel HNR,0 9709 en 5..90. without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
9709 bypass valve for standard and high flow systems Standard flow valves 5 5 5, 9,7 5 5 ~8 ~7 ~8,5 0,5 7 5/ M5 7,5 ~5 High flow valves 5 70 5 5 0, 6, 5 ~7 ~ ~5 6 5/ 9 6 0 M6 ~77 Inlet and exhaust ports G / or / NPT Namur flamge plate Inlet and exhaust ports G / or / NPT 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Exhaust guard (plastic) - standard option G Visual indicator (stainless steel) - standard option ø D ød G ød Visual colour Red (unactuated) Green (actuated) Suitable for G Ø D Weight (g) Model / G /, / NPT 0 6,5 5 06 / G /, / NPT,5 9 06 Ø D Ø D G Weight (g) Model G / 8,5 5 779-6 / NPT 8 6 5 779-60 Silencer (plastic) Silencer (stainless steel) G ø D G G Ø D Weight (g) Model G / 7 5,5 5,5,9 M/S / NPT 7 5,5 5,5,9 /S G / 67,5 M/S / NPT 67,5 /S Plug (stainless steel) G Weight (g) Model G / 6 8 6 006 / NPT 6 8 6 67 06678 G / 9 8 008 / NPT 9 5 06679 Visual indicator (plastic) G G Weight (g) Model G/ 0669 / NPT 0 7 8 06808 Sealing washer (plastic) Ø D Ø D Weight (g) Model /8 NPTF 6 0 5 5VS--000 Adapter (stainless steel) E ø D ø D Visual colour Red (unactuated) Green (actuated) ø D ø D G For plug ø D ø D E Weight (g) Model G /,5 7,5 066085 G Weight (g) Model / NPT /8 NPT,5 0 06659 en 5..90. without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH 6/5
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 6/5 without notice, the specifications given in this document. (0-577c) 0 Norgren GmbH en 5..90.5