Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC /
General characteristics For material handling applications, type XC C Environment characteristics Conformity to standards IEC/EN 0--, IEC 0-, VDE 00-0, CS C- n Product certifications Special version CS 00 V (ac) HD Protective treatment Version Standard: TC. Special: TH mbient air temperature For operation - + 0 C For storage - 0 + 0 C Operating position ll positions Vibration resistance gn ( 00 Hz) conforming to IEC 00-- Shock resistance gn ( ms) conforming to IEC 00-- Electric shock protection Class I conforming to IEC 0 and NF C -00 Degree of protection IP conforming to IEC 0 and NF C -0 Mechanical durability million operating cycles Cable entry tapped entries for n cable gland Contact block characteristics Conventional thermal current Rated insulation voltage Slow break contact blocks 00 V a and 00 V c conforming to IEC 0--, NF C -00 a and 00 V c conforming to CS C- n Resistance across terminals mw Minimum tripping force XC Cp: N, XC Cp: N, XC Cp: N Terminal referencing Conforming to CENELEC EN 00 Short-circuit protection cartridge fuse type gg (gl) Electrical durability b Conforming to IEC 0-- ppendix C b Utilisation categories C- and DC- b Maximum operating rate: 00 operating cycles/hour b Load factor: 0. Slow break contact blocks C supply 0/0 Hz a inductive circuit Power broken in V Voltage V For million operating cycles 0 00 0 For million operating cycles 0 0 0 DC supply c inductive circuit Power broken in W Voltage V For million operating cycles 0 0 For million operating cycles 0 /
References, characteristics Type of head For material handling applications, type XC C Complete switches with slow break contacts Plunger Type of operator End End ball bearing References of complete switches.. -pole NC + NC simultaneous, slow break ZC Z... Weight (kg) Contact operation. XC C.. -pole NO + NO staggered, slow break ZC Z....... XC C. XC C.. XC C XC C. 0.0 closed open 0.0 On end y 0 cam XC C 0....... XC C 0....... Maximum actuation speed Cable entry Connection /...... XC C.. XC C.. XC C XC C.. XC C XC C..... XC C XC C.... XC C. XC C. XC C XC C. XC C.... XC C. XC C. XC C. XC C.. XC C XC C.. 0.0 Complementary characteristics Switch actuation Type of actuation.. XC C XC C XC C XC C -pole NC + NC staggered, slow break ZC Z... XC C XC C -pole NO + NO simultaneous, slow break ZC Z. XC C -pole NO + NC make before break ZC Z XC C. XC C Needle bearing mounted roller lever XC C. XCC -pole NC + NO break before make, slow break ZC Z Offset roller lever Reinforced roller lever XCC XCC XC C XC C XC CXCCXCC XC C XCC XC C Single-pole CO slow break ZC Z Roller lever 0. m/s m/s (direction ), 0. m/s (direction ) () tapped entries for n (DIN Pg.) cable gland, clamping capacity to ( entries fitted with blanking plug) Screw terminals. Clamping capacity: min. x 0., max. x. () For a cam the maximum actuation speed becomes 0. m/s and for a cam, m/s.. XC C 0.0.
Dimensions For material handling applications, type XC C Complete switches with slow break contacts XC Cp XC Cp XC Cp 0 0 () = = () = = () = = XC Cp XC Cp, XC Cp 0. Ø.. () = = () = = () tapped entries for n cable gland or ISO with adaptor DE R. Ø: elongated holes Ø. x. /
References For material handling applications, type XC C Replacement parts ZC C00 Plunger heads Type of operator Maximum actuation speed Type of actuation Reference Weight kg For actuation on end End 0. m/s ZC C00 0.0 For actuation by 0 cam End ball bearing 0. m/s ZC C00 0.00 ZC C00 Roller lever m/s (direction ) 0. m/s (direction ) ZC C00 0.0 ZC C00 ZC C00 ZC C00 ZC C00 ZC Zp Reinforced roller lever Offset roller lever Needle bearing mounted roller lever m/s (direction ) 0. m/s (direction ) m/s (direction ) 0. m/s (direction ) m/s (direction ) 0. m/s (direction ) ZC C00 0. ZC C00 0.0 ZC C00.0 Contact blocks Type of contact Scheme Reference Weight kg CO, single-pole ZC Z 0.00 NC + NO break before make ZC Z 0.0 NO + NC make before break ZC Z 0.00 NC + NC simultaneous ZC Z 0.0 NO + NO simultaneous ZC Z 0.0 NC + NC staggered ZC Z 0.00 NO + NO staggered ZC Z 0.00 daptation plate Description Reference Weight kg Mounting plate (For replacing an old version type RN- limit switch by an XC C limit switch) ZC Z.0 /
Dimensions For material handling applications, type XC C Replacement parts Dimensions ZC C00 ZC C00 ZC C00 0 ZC C00 ZC C00, C00 0. Ø. /