Material Safety Data Sheet. Helmar Crystal Kote Fixative

Similar documents
Material Safety Data Sheet. Helmar Crystal Kote Picture Varnish Gloss

Material Safety Data Sheet. Aerosol Nuart Mat Spray

Material Safety Data Sheet Aerosol Nuart Retouch Varnish IDENTIFICATION OF THE MATERIAL AND SUPPLIER HAZARDS IDENTIFICATION.

Material Safety Data Sheet. Aerosol National Art Materials Spray Adhesive COMPANY AND PRODUCT IDENTIFICATION

Micador Fixative. 1. Product Identifier & Identity for the Chemical

TERMATRIX TERMITE FOAM AEROSOL

Micador Picture Varnish Mat

Safety Data Sheet. Page: 1. Product Name LUSTRE SHEEN FURNITURE POLISH. 1. Identification. 2. Hazard Identification

Safety Data Sheet. Page: 1. Infosafe No VARAC Issue Date : September 2016 ISSUED by HUNTERST SETTLING DAY. 1. Identification. 2. Hazard Identification

Material Safety Data Sheet

Pure Vita Canola Oil Cooking Spray 400g

MATERIAL SAFETY DATA SHEET

CONSTRUCTION ADHESIVE

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (SDS)

Safety Data Sheet IDENTIFICATION OF THE MATERIAL AND SUPPLIER. INOX mx8 Premium Spray Grease g Aerosol. Spray lubricant for industrial uses.

MATERIAL SAFETY DATA SHEET

SPACE INVADER (AEROSOL) Selleys New Zealand, a division of DuluxGroup (New Zealand) Pty Ltd ABN Co

SAFETY DATA SHEET. Section 1: IDENTIFICATION MICROL

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Vanilla Fresh

Date of Issue: 20 January 2010 Page 1 of 5 MATERIAL SAFETY DATA SHEET IDENTIFICATION. David Grays Outdoor Fogger Regular

Safety Data Sheet Bokundo Marbling Dye Kit

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 1: IDENTIFICATION BATHROOM MAGIC. Recommended Use: Detergent for bathrooms. Product Code: 782

MATERIAL SAFETY DATA SHEET FOOD SAFE LUBRICANT

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 1: IDENTIFICATION DOMESTEZ. Recommended Use: Tile and grout cleaner for bathroom areas.

MATERIAL SAFETY DATA SHEET. ACTION LANOSPRAY Commercial Grade Lanolin Protection

Material Safety Data Sheet

TENSOSPRAY MSDS No. 188

SAFETY DATA SHEET. Section 1: IDENTIFICATION CARPET MATE. Recommended Use: Heavy-duty hot/cold water extraction chemical.

MATERIAL SAFETY DATA SHEET

S16- Keep away from sources of ignition - No smoking. S46- If swallowed, seek medical advice immediately and show this container or label.

Lubricating and penetrating spray which displaces water to help start wet engines, loosen nuts and bolts and release rusted locks.

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET PENETRATING FLUID

Chemical Entity CAS No. Proportion (to 100%)

MATERIAL SAFETY DATA SHEET POWER DUSTER FLAMMABLE. Reference nr Date of edition 02/09/14. Page 1 of 7. Revision nr 1 Date of revision 02/09/14

SAFETY DATA SHEET SILICONE MOULD RELEASE

!!!!! MATERIAL SAFETY DATA SHEET Section 1 Identification of Chemical Product and Company. Action Corrosion Clear Coat Aerosol 400g

SAFETY DATA SHEET. Section 1: IDENTIFICATION NEUTROCLEAN

Aerosol for the removal of tar and insects from automotive surfaces.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

EXPANDABLE GRAPHITE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Material Safety Data Sheet

Material Safety Data Sheet

GROUT STAIN WHITENER. For advice, contact a Poisons Information Centre (e.g. phone Australia ; New Zealand ) or a doctor.

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Paint Stamper Pads

MATERIAL SAFETY DATA SHEET (MSDS)

Safety Data Sheet Rainbow Paint

SKIN-PREP PROTECTIVE BARRIER SPRAY

Safety Data Sheet According to NOHSC:2011(2003)

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Section 1: IDENTIFICATION CITRA GEL. Recommended Use: Hand Cleaner Product Code: See Manufacturers Code

SAFETY DATA SHEET ENVY 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION / INFORMATION ON INGREDIENTS

Material Safety Data Sheet

ISSUE DATE: October 2003 REVISION DATE: June 2010 MATERIAL SAFETY DATA SHEET. Attach 2. Alginate Tray Adhesive

Dulux Australia, a division of DuluxGroup (Australia) Pty Ltd ABN:

Material Safety Data Sheet

PARFIX COLOUR FLEX. Based on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.

MATERIAL SAFETY DATA SHEET

The POPS Group Pty Ltd as Trustee for The Pool Shops Trust Address

Material Safety Data Sheet

SAFETY DATA SHEET. Section 1: IDENTIFICATION CLEAR REFLECTIONS SUPER CONCENTRATE

Date of Issue: March 2008 Page 1 of 5 MATERIAL SAFETY DATA SHEET IDENTIFICATION

Date of Issue: September 2014 Page 1 of 5 MATERIAL SAFETY DATA SHEET IDENTIFICATION. Magnesium Sulphate Heptahydrate, Epsom Salts, Bitter Salts.

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

Safety Data Sheet Face and Body Crayons

Ready to use oil based insecticide for controlling various home garden insect pests.

Bankside House Bankside Business Park Coronation Street South Reddish Stockport Cheshire SK5 7PG

PROACTIVE GLASS CLEANER

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (SDS) POLYGARD BRAKE CLEANER SPRAY

Multi Purpose Thinner

MATERIAL SAFETY DATA SHEET

Micador Rubber Cement

Safety Data Sheet Air Drying Clay

POLYFILLA GAP FILLER - WHITE

Material Safety Data Sheet NON-Hazardous Substance, NON-Dangerous Goods

COMPONENT CAS NUMBER CONCENTRATION Salmon Oil %

Safety Data Sheet Creatistics Dough

PRODUCT NAME: CHLOR DET

Supplier Organisation Location Contact Information Chemform Pty Ltd ABN:

CRAFTERS CHOICE FABRIC GLUE

Section 3: COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Entity CAS No. Proportion (to 100%)

MATERIAL SAFETY DATA SHEET SILICONE OIL AEROSOL

SAFETY DATA SHEET PAINT STRIPPER

Transcription:

IDENTIFICATION OF THE MATERIAL AND SUPPLIER Company Name Helmar Australia Pty Ltd ABN 28 003 425 796 Address 54-56 Brisbane Road, Riverstone, NSW 2765 Emergency Tel: 0418 230 719 Tel / Fax: (02) 9627 4666 / (02) 9627 4424 Email: mripper@helmar.com.au Product Name Other Names Manufacturers Code Recommended use Not relevant Not relevant Clear permanent protection for artwork HAZARDS IDENTIFICATION Hazard Classificatio n Risk phrase(s) Safety phrase(s) This product is classified as hazardous under NOHSC criteria. This product is classified as a Dangerous Good by the Australian Dangerous Goods Code. F: Flammable Xn: Harmful Carc. Cat 3 Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal. R40: Limited evidence of carcinogenic effect. R11 Highly flammable. Extremely flammable- Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition No smoking. Spray in well ventilated area. S2 S23 Keep out of reach of children Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). S24/25 Avoid contact with skin and eyes. S36/37 Wear suitable protective clothing and gloves. S7 Keep container tightly closed. S16 Keep away from sources of ignition - No smoking. For further health and safety information please refer to the full MSDS. COMPOSITION / INFORMATION ON INGREDIENTS Chemical Name CAS Number Proportion Dichloromethane 75-09-2 10 30% Ethanol 64-17-5 30 60% Hydrocarbon propellant - Propane 74-98-6 30-60% Issue Date: 05 September 2006 Page 1 of 5

- Butane 106-97-8 Other ingredients to 100% FIRST AID MEASURES For advice, contact a Poisons Information Centre, Phone Australia 13 1126; New Zealand 0800 764 766, or a doctor at once. Inhalation: Do not breathe vapour. Remove victim to fresh air. Keep victim warm and calm. If patient is unconscious and breathing, place them in the coma position, check airway and observe. Administer oxygen if breathing is difficult. Apply resuscitation if victim is not breathing. Obtain immediate medical care. Skin: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair immediately with running water at room temperature for 15 minutes. Eye: If in eyes wash out immediately with water for 15 minutes. Obtain medical care. Ingestion: Due to high volatility of product, this is not likely to occur. If sprayed in mouth, rinse mouth with water. If swallowed, do NOT induce vomiting. Obtain medical care. FIRE FIGHTING MEASURES Suitable Extinguishing Media Hazards Small fire: Use water spray, dry chemical or carbon dioxide. Large fire: Use water spray or fog. Fight fire from protected position or use unmanned hose holders or monitor nozzles. If safe to do so, move undamaged containers from fire area. Do not approach hot containers. Cool containers with water before handling. If impossible to extinguish fire, protect surroundings, withdraw from are and allow fire to burn. Heat or damage to containers can release flammable / poisonous gases. Extremely flammable. Pressurised dispenser. Closed containers may rupture when exposed to heat greater than 50 C. Ruptured containers will rocket. Released gases can form explosive mixtures with air. Hazardous concentrations can accumulate in a confined space. Released gases can travel to source of ignition and flash back. Fire can produce irritating, poisonous and corrosive gases. Propellant is extremely flammable and heavier than air. Precautions / PPE High concentration of gas could cause dizziness or asphyxiation without warning. Released gases are harmful. Wear SCBA and protective gloves. If large amounts are involved, wear SCBA and chemical splash suit. HAZCHEM Code 3WE ACCIDENTAL RELEASE MEASURES Emergency Procedures Immediately contact police or fire brigade. Spill or leak area should be isolated immediately for at least 8 m in all directions. Eliminate all sources of ignition within at least 15 m. Keep unauthorised personnel away. Keep upwind and to higher ground. When a large quantity is involved in a fire, consider initial evacuation for at least 100 m in all directions. Send message to police and fire brigade. Tell them the location, material, UN Number, quantity and emergency contact as well as damage observed. Issue Date: 05 September 2006 Page 2 of 5

Containment / Clean up Procedures Eliminate all ignition sources (no smoking, flares, sparks or flame) within at least 15 m. All equipment used when handling the product must be earthed. If water is available, spray leaking containers to reduce ignition hazard and disperse gas. Isolate area until gas has dispersed. Ventilate area. Avoid release to the environment. Do not empty into drains. Absorb in inert absorbent material for disposal by an approved method and / or local regulations. HANDLING AND STORAGE Precautions for Safe Handling Conditions for Safe Storage Spray in a well ventilated area. Do not breathe vapour. Local exhaust ventilation may be necessary to minimise excessive vapour concentration, if levels are likely to be high or in a confined space. Avoid static charge and discharge with high concentrations and in confined space. Avoid contact with skin and eyes. Do not breathe gas/fumes/vapour/spray. Store in a well ventilated area. Pressurised dispenser. Protect from sunlight and do not expose to temperatures exceeding 50 C. Do not pierce or burn this can, even when empty. Store away from corrosive products. Store in accordance with Dangerous Goods Regulations and transport in accordance with the ADG Code for Dangerous Goods Class 2.1 EXPOSURE CONTROLS / PERSONAL PROTECTION National Exposure Standards Biological Limit Values Engineering Controls Personal Protective Equipment There is no extablished TLV for this product. Avoid exposure obtain special instructions before use. TWA for Dichloromethane is 50ppm. TWA for Butane is 800ppm. Propane is an asphyxiant. Do not breathe gas/fumes/vapour/spray. Not available. Local exhaust ventilation may be necessary to minimise excessive vapour concentration, if levels are likely to be high or in a confined space. Wear safety glasses and protective gloves. Wear respirator complying with AS1715 and AS1716 if concentration levels are high. Wear suitable protective clothing and gloves. PHYSICAL AND CHEMICAL PROPERTIES Appearance Aerosol, fine clear spray Odour Solvent like ph Vapour Pressure Not available Vapour Density Not available Boiling / Melting Point Not available Issue Date: 05 September 2006 Page 3 of 5

Solubility Specific Gravity Flash Point (propellant) Flammable limits (propellant) Ignition Temperature (propellant) Not soluble 0.58 approx. -104 to -60 C 1.5% to 9.6% in air (v/v) 494 C to 600 C STABILITY AND REACTIVITY Chemical Stability Conditions to avoid Incompatible Materials / Hazardous Reactions Hazardous Decomposition Products Stable under normal ambient conditions of storage and use. Avoid heat sources. Heat, flames and sparks. Avoid static charge and discharge with high concentrations and in confined space. Avoid damp conditions. Can react violently with oxidising agents chlorine, pool chlorine or nitric acid. Not available. TOXICOLOGICAL INFORMATION Potential adverse health effects and symptoms associated with exposure to the material R40: Limited evidence of carcinogenic effect. Vapours may cause drowsiness and dizziness. Swallowed: Unlikely due to high volatility of product, but is harmful, may cause lung damage if swallowed Eyes: Liquid will cause severe damage, vapour may irritate. Skin: May cause cold burn. Irritating to skin. Inhaled: May cause light-headedness, dizziness and drowsiness. Excessive exposure may cause unconsciousness or even death, due to asphyxiation. ECOLOGICAL INFORMATION Ecotoxicity / Persistence / Degradability / Mobility Propellant will vapourise rapidly when released to atmosphere. Propellant consists of hydrocarbons that photo chemically decompose under atmospheric conditions. DISPOSAL CONSIDERATIONS Disposal methods Special precautions for landfill or incineration Dispose of can by putting in garbage or leaving it at an appropriate metal recycling collection point. Do not pierce or burn, even when empty. TRANSPORT INFORMATION UN Number 1950 Proper Shipping Name Aerosols Issue Date: 05 September 2006 Page 4 of 5

Emergency Procedure Guide Class and subsidiary risk(s) Packaging Group Special precautions for user Hazchem 2D1 2.1 Spray in well ventilated area. Keep away from sources of ignition No smoking. Extremely flammable- Do not spray on a naked flame or any incandescent material. Keep out of reach of children. 3WE REGULATORY INFORMATION Poisons Schedule Additional information n/a OTHER INFORMATION Date of preparation 04/09/06 Issue 1 Issue Date: 05 September 2006 Page 5 of 5