KF - M W 21. 3) Applicable terminal (e.g. 11 = 110/ 05 = Bullet 5) W = Double wire --- = Single wire. 4)Applicable wire O.D (e.g. 18 = 1.

Similar documents
Small packagings with 100 pcs./bag are available at additional costs! colour of insulation. colour of insulation. cross section mm 2.

XML Electromechanical Pressure Switches

Primary Terminals & Connectors

Mouldings in flexible PVC

PLIO Mouldings in flexible PVC

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow

AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications

TRANSFORMER BUSHING AND ACCESSORIES

AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications

CPTCONNECTOR. Board-to-wire. Features. Specifications

8.0. Tube and Fitting Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0

Item No.: /

PRODUCT SPECIFICATION

Method Two Multi-Character

BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB

10 - TU0425 BU Color B Black W White R Red BU Blue Y Yellow G Green C Clear YR Orange. Tubing model. Inch size (Series TIUB) Model 3.

OPEN ROUND SLING 60 cm (WEBBING) OPEN ROUND SLING 120 cm (WEBBING) 1.5 m ANCHOR STRAP (PVC SLEEVE PROTECTOR) Product Code: HS2/001 SLINGS

SM Models Manual Control

Electromechanical pressure switches

PARTS LIST FOR ELBOWS, COUPLERS,TUBING & HOSES

Table for PP. over welding cool-down time 0,10 (PP) time pressure pressure in

IECEx Certificate of Conformity

SM Models Manual Control

Hoses and Lances 20,000 PSI

kēlo LED Light Installation Instructions

Pro-Tekt European Cable System. Technical Catalog

Differential pressure controls, Type MP 54, 55 and 55A

CCSSL35 Carry out the wiring and testing of electrical circuits and equipment

Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.

Screw Terminal Block Cables

LED Directionals Helios LED light bars

Prewired position switches FA series

Pressure controls for hydro carbons, zone II applications, Type KPE

CATALOGUE EXTRACT SIRCO PV. Disconnect switches for photovoltaic applications From 100 to 2000 A, up to 1500 VDC UL 98B & IEC

BEST DRESSED COMPETITIONS

Conductor Bushings Series 8174

TYPE APPROVAL CERTIFICATE

RELAY PRODUCT GUIDE CONTENTS

SPECIFICATION SHEET. OMEGAFLEX, Ltd. TracPipe Flexible Gas Piping Specification Sheet Specification date. ProjectName

COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW

Pneumatic valve islands

POWER DELIVERY. Contractor Health & Safety General Terms and Conditions. Appendix B Personal Protective Equipment

STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves

STA. Double regulating valves DN 15-50

Differential Pressure Control Types MP 54, MP 55 and MP 55A

LP31 Level Probe. 1. Safety information. 2. General product information. 3. Installation. 4. Wiring. 5. Maintenance

SP/ST/SA Models Pulse-input and Analog-input Control

Med Aire Alternating Pressure Pump and Pad System

X2 Metallized Polypropylene Film Capacitor JFV

Limit switches OsiSense XC Special For material handling applications, type XC1 AC

Differential pressure switch MP 54, MP 55 and MP 55A

Pneumatic spool valve islands

SMARTen STP Patch Cords Features

Pressure switch KP-E. Data sheet

SUPPLY OF ISOLATION AND APPLIANCE VALVES PTS - ISOLATION BALL VALVE

JSP. MKT Series J S P -

EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:

EPIC Rectangular Connectors HBE Series

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES

Electrical Safety, Subpart K

Ceramic Disc Capacitors Safety Standard Approved Disc Capacitor

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET

4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED

STAD. Balancing valves DN (MD60, MD61, MD62)

Zelio Relays RSL Slim Interface Plug-In Relays

Amphenol. PowerLink Solar Cables. Amphenol 97 Series Connectors are UL recognized and CSA recognized.

RoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator

HV & UHV Vacuum Products Catalogue. prov iding l ead i ng techno logy products. Seals. Tees. Gaskets. Fittings. Crosses. 5th E:d1t1on.

X2 Metallized Polypropylene Film Capacitor JFV

XMPA12B2142 pressure sensor XMP - 12 bar - G 1/4 female - 2 NC - without control type

Power Unit 075. Maintain Substation Circuit Breakers

HV Spiker Kit - CSTE. 30 th April 2014

stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with encoder / brake

SUPPLY OF ISOLATION AND APPLIANCE VALVES PTS - APPLIANCE BALL VALVE

KMT. Thermal Mass Flowmeter. for compressed air and gases. Measuring range: Nm³/h Nm³/h

MICRO SWITCH 914CE Series

Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure

ibridge and ibridge Ultra

Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12

Welcome to the new Just Balls catalogue

MULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

APPS-160 Gen 2 User Manual

Quick Reference Guide Power Series Switches

Electro Controls. Pressure WattsIndustries.co.uk


Self Drilling Anchor System

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006

TreeFlex is a brand name of Safety Technology Ltd

MZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION

STAD. Balancing valves DN 15-50

PRODUCT SPECIFICATION

TA-H.U.B. Centralised balancing and control ENGINEERING ADVANTAGE

Alhambra Arabic design, British engineering

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition

EVRM-NC EVRM-6NC. delta-elektrogas.com. Safety solenoid valves for gas Manual reset - Normally closed DN10 DN300.

Transcription:

Model number identification KF - M 11 18 W 21 1) Boot type (Refer to table) 2) M = Post FIT --- = PRE FIT 6) Boot Length (e.g. 21 = 21mm) 3) Applicable terminal (e.g. 11 = 110/ 05 = Bullet 5) W = Double wire --- = Single wire 4)Applicable wire O.D (e.g. 18 = 1.8mm) Boot Type Part Name KF/KFH/KFO KFF/KFFH/KFFO KP/KPH/KPO KS/KSH/KSO Applicable STRAIGHT (e.g. STO) FLAG (e.g. SFO) MALE BULLET (e.g. SGM) FEMALE BULLET (e.g. SGF) Material Data Part Name KF/KFF/KS/KP KFH/KFFH/KSH/KPH KFO/KFFO/KSO/KPO Material Type PVC SH-108VT PVC X-731TJ PVC No. 4 Burn Rate JIS K7201 UL94V-2 UL94V-0 Max. Voltage Rating 300 V 600 V 600 V Temperature Range -40 c 60 c -30 c 105 c -30 c 60 c Max. Voltage 17.1 KV 13.7 KV 25.8 KV Durability (10KV) 3.00 Seconds 3.00 Seconds 12.00 Seconds Max. Elongation 400% 310% 220% Harness (Durometer A Type) 63 65 63 65 67 70 UL Card No. E64155 (S) E64155 (S) E64155 (S)

Flag Type <KFF-M Version> E64155 (S) Dimensions(mm) Model No. Wire O.D. (mm) d1ø KFF-M1830 3.0 5.7 6 2.3 16+/-1 KFF-M2540 4.0 8 9 3.5 16+/-1 N Flag Type <KFF-187 Version> dø E64155 (S) Dimensions(mm) Model No. Wire O.D. (mm) d1ø KFF-182517 2.5 5.7 2.3 14+/-1 KFF-183217 3.2 5.7 2.3 14+/-1 Note: 1) Delivery lead times may vary depending on the product. Contact JST for details, these products are ONLY available from the following JST affiliates; J.S.T. (U.K.) Ltd, J.S.T. Belgium N.V., J.S.T. India Liaison Office, and JST-SouthAfrica.com. 2) In line with a policy of continual product development, JST reserves the right to change the specifications of the goods described in the catalogue At any time and without prior notice. These specifications comply with the latest status quo and are subject to change without any notice.

Flag Type <KFF-250 Version> dø E64155 (S) Model No. Dimensions(mm) dø Wire O.D. (mm) KFF-252517 2.5 8 4.5 3.5 16+/-1 2.02.4 KFF-253017 3.0 8 4.5 3.5 16+/-1 KFF-253217 3.2 8 4.5 3.5 16+/-1 2.53.1 KFF-253817 3.8 8 4.5 3.5 16+/-1 3.23.7 KFF-254017 4.0 8 3.5 16+/-1 KFF-254817 4.8 8 4.5 3.5 16+/-1 3.84.7 Note: 1) Delivery lead times may vary depending on the product. Contact JST for details, these products are ONLY available from the following JST affiliates;. J.S.T. (U.K.) Ltd, J.S.T. Belgium N.V., J.S.T. India Liaison Office, and JST-SouthAfrica.com. 2) In line with a policy of continual product development, JST reserves the right to change the specifications of the goods described in the catalogue At any time and without prior notice.

Insulation Sleeve & Terminal Finder Straight Type (Tab-on Type) Part Number Wire Insulation O.D.(mm) Part number Wire Insulation O.D. (mm) KF-111821 1.51.7 STO-0.25(*)-110N(*)-5 1.31.5 KF-111821 1.51.7 STO-0.25(*)-110N(*)-8 1.31.5 KF-111821 1.51.7 STO-0.5(*)-110N(*)-5 1.52.0 KF-111821 1.51.7 STO-0.5(*)-110N(*)-8 1.52.0 KF-112521 1.82.4 STO-01(*)-110N(*) 2.12.8 KF-112821 2.52.7 STO-01(*)-110N(*) 2.12.8 KF-113021 2.83.0 STO-01(*)-110N(*) 2.12.8 KF-112521 1.82.4 STO-01(*)-110N(*)-8 2.12.8 KF-112821 2.52.7 STO-01(*)-110N(*)-8 2.12.8 KF-113021 2.83.0 STO-01(*)-110N(*)-8 2.12.8 KF-112521 182.4 110 STO-1.0(*)-110N(*)-5 2.03.3 KF-112821 2.52.7 STO-1.0(*)-110N(*)-5 2.03.3 KF-113021 2.83.0 STO-1.0(*)-110N(*)-5 2.03.3 KF-112521 1.82.4 STO-1.0(*)-110N(*)-8 2.03.3 KF-112821 2.52.7 STO-1.0(*)-110N(*)-8 2.03.3 KF-113021 2.83.0 STO-1.0(*)-110N(*)-8 2.03.3 KF-112821 2.52.7 STO-41(*)-110N(*) 2.63.5 KF-113021 2.83.0 STO-41(*)-110N(*) 2.63.5 KF-112821 2.52.7 STO-41(*)-110N(*)-8 2.63.5 KF-113021 2.83.0 STO-41(*)-110N(*)-8 2.63.5 KF-182523 1.72.4 STO-1.0(*)-187N(*)-5 2.03.5 KF-182823 2.52.7 STO-1.0(*)-187N(*)-5 2.03.5 KF-182523 1.72.5 STO-1.0(*)-187N(*)-8 2.03.5 KF-182823 2.52.7 STO-1.0(*)-187N(*)-8 2.03.5 KF-181823 1.51.7 STO-01(*)-187N 1.52.6 KF-182523 1.72.4 STO-01(*)-187N 1.52.6 KF-182823 2.52.7 STO-01(*)-187N 1.52.6 KF-181823 1.51.7 STO-01(*)-187N-8 1.52.6 KF-182523 1.72.4 STO-01(*)-187N-8 1.52.6 KF-182823 2.52.7 187 STO-01(*)-187N-8 1.52.6 KF-182823 2.52.7 STO-41(*)-187N 2.63.5 KF-183023 2.82.9 STO-41(*)-187N 2.63.5 KF-183523 3.03.4 STO-41(*)-187N 2.63.5 KF-184023 3.53.9 STO-41(*)-187N 2.63.5 KF-182823 2.52.7 STO-41(*)-187N(*)-8 2.63.5 KF-183023 2.82.9 STO-41(*)-187N(*)-8 2.63.5 KF-183523 3.03.4 STO-41(*)-187N(*)-8 2.63.5 KF-184023 3.53.9 STO-41(*)-187N(*)-8 2.63.5

KF-202523 2.02.4 STO-21(*)-205N 2.33.0 KF-203223 2.53.1 STO-21(*)-205N 2.33.0 KF-202523 2.02.4 205 STO-21(*)-205N-5 2.33.0 KF-203223 2.53.1 STO-21(*)-205N-5 2.33.0 KF-252524 2.02.4 STO-1.0(*)-250N(*) 2.03.3 KF-252824 2.52.7 STO-1.0(*)-250N(*) 2.03.3 KF-253024 2.72.9 STO-1.0(*)-250N(*) 2.03.3 KF-253024 2.72.9 STO-2.5(*)-250N(*) 2.74.3 KF-253224 2.93.1 STO-2.5(*)-250N(*) 2.74.3 KF-253525 3.13.4 STO-2.5(*)-250N(*) 2.74.3 KF-253825 3.53.7 STO-2.5(*)-250N(*) 2.74.3 KF-254025 3.73.9 STO-2.5(*)-250N(*) 2.74.3 KF-254525 4.04.4 STO-6.0(*)-250N(*) 3.95.1 KF-254825 4.54.7 STO-6.0(*)-250N(*) 3.95.1 KF-255026 4.74.9 STO-6.0(*)-250N(*) 3.95.1 KF-256027 5.05.8 STO-6.0(*)-250N(*) 3.95.1 KF-252524 2.02.4 250 STO-21(*)-250N(*) 2.33.0 KF-252824 2.52.7 STO-21(*)-250N(*) 2.33.0 KF-253024 2.72.9 STO-21(*)-250N(*) 2.33.0 KF-253024 2.72.9 STO-61(*)-250N(*) 2.83.8 KF-253224 2.93.1 STO-61(*)-250N(*) 2.83.8 KF-253525 3.13.4 STO-61(*)-250N(*) 2.83.8 KF-253825 3.53.7 STO-61(*)-250N(*) 2.83.8 KF-254025 3.73.9 STO-61(*)-250N(*) 2.83.8 KF-254525 4.04.4 STO-81(*)-250N(*) 3.85.0 KF-254825 4.54.7 STO-81(*)-250N(*) 3.85.0 KF-255025 4.74.9 STO-81(*)-250N(*) 3.85.0 KF-256027 5.05.8 STO-81(*)-250N(*) 3.85.0

Straight Type <Tab-in type> Applicable insulation Sleeve Part Number Wire insulation O.D. (mm) Part number Wire Insulation O.D. (mm) KF-112521 1.82.4 STI-01(*)-110N 2.12.8 KF-112821 2.52.7 STI-01(*)-110N 2.12.8 KF-113021 2.83.0 110 STI-01(*)-110N 2.12.8 KF-112821 2.52.7 STI-41(*)-110N 2.63.5 KF-113021 2.83.0 STI-41(*)-110N 2.63.5 KF-252524 2.02.4 STI-51(*)-250N 2.63.8 KF-252824 2.52.7 STI-51(*)-250N 2.63.8 KF-253024 2.72.9 STI-51(*)-250N 2.63.8 KF-253224 2.93.1 STI-51(*)-250N 2.63.8 KF-253525 3.13.4 STI-51(*)-250N 2.63.8 KF-253825 3.53.7 STI-51(*)-250N 2.63.8 KF-254025 3.73.9 STI-51(*)-250N 2.63.8 KF-252524 2.02.4 STI-1.0(*)-250D(*) 2.03.3 KF-252824 2.52.7 STI-1.0(*)-250D(*) 2.03.3 KF-253024 2.73.1 STI-1.0(*)-250D(*) 2.03.3 KF-252524 2.02.4 STI-1.0(*)-250N(*) 2.03.3 KF-252824 2.52.7 250 STI-1.0(*)-250N(*) 2.03.3 KF-253024 2.72.9 STI-1.0(*)-250N(*) 2.03.3 KF-253024 2.72.9 STI-2.5(*)-250D(*) 2.74.3 KF-253224 2.93.1 STI-2.5(*)-250D(*) 2.74.3 KF-253525 3.13.4 STI-2.5(*)-250D(*) 2.74.3 KF-253825 3.53.7 STI-2.5(*)-250D(*) 2.74.3 KF-254025 3.73.9 STI-2.5(*)-250D(*) 2.74.3 KF-253024 2.72.9 STI-2.5(*)-250N(*) 2.74.3 KF-253224 2.93.1 STI-2.5(*)-250N(*) 2.74.3 KF-253525 3.13.4 STI-2.5(*)-250N(*) 2.74.3 KF-253825 3.53.7 STI-2.5(*)-250N(*) 2.74.3 KF-254025 3.73.9 STI-2.5(*)-250N(*) 2.74.3 Flag Type Soft Boot Part Number Soft Boot Insulation O.D. (mm) Terminal Part Number Terminal Insulation O.D. (mm) KFF-253217 2.53.1 SFO-61(*)-250A 2.83.8 KFF-253817 3.23.7 SFO-61(*)-250A 2.83.8 KFF-254817 3.84.7 SFO-61(*)-250A 2.83.8 KFF-252517 2.02.4 SFO-1.0(*)-250N(*) 2.03.3 KFF-253217 2.53.1 250 SFO-1.0(*)-250N(*) 2.03.3 KFF-253817 3.23.7 SFO-1.0(*)-250N(*) 2.03.3 KFF-253217 2.53.1 SFO-2.5(*)-250N(*) 2.74.3 KFF-253817 3.23.7 SFO-2.5(*)-250N(*) 2.74.3 KFF-254817 3.84.7 SFO-2.5(*)-250N(*) 2.74.3

Female Bullet Type Part Number Wire Insulation O.D. (mm) Prt Number Wire Insulation O.D. (mm) KS-052534 2.12.4 SGF-21T-5 1.72.9 KS-052834 2.42.7 SGF-21T-5 1.72.9 KS-053034 2.72.9 SGF-21T-5 1.72.9 KS-052834 2.42.7 SGF-41T-4 2.63.5 KS-053034 2.72.9 SGF-41T-4 2.63.5 KS-053234 2.93.1 Bullet SGF-41T-4 2.63.5 KS-053534 3.13.4 SGF-41T-4 2.63.5 KS-052834 2.42.7 SGF-51T-5 2.63.8 KS-053034 2.72.9 SGF-51T-5 2.63.8 KS-053234 2.93.1 SGF-51T-5 2.63.8 KS-053534 3.13.4 SGF-51T-5 2.63.8 Male bullet Type Applicable terminal Part Number Wire Insulation O.D. (mm) Part Number Wire Insulation O.D. (mm) KP-052514 2.12.4 SGM-21T-5 1.72.9 KP-052814 2.42.7 SGM-21T-5 1.72.9 KP-053014 2.72.9 SGM-21T-5 1.72.9 KP-052814 2.42.7 SGM-51T-4 2.63.8 KP-053014 2.72.9 SGM-51T-4 2.63.8 KP-053214 2.93.1 Bullet SGM-51T-4 2.63.8 KP-053514 3.13.4 SGM-51T-4 2.63.8 KP-052814 2.42.7 SGM-51T-5 2.63.8 KP-053014 2.72.9 SGM-51T-5 2.63.8 KP-053214 2.93.1 SGM-51T-5 2.63.8 KP-053514 3.13.4 SGM-51T-5 2.63.8