PEWTER. Section 1: PRODUCT INFORMATION B2, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

Similar documents
TOPAZ. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

PEWTER. Section 1: PRODUCT INFORMATION B2, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

10 10A. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

130 HIGH GLOSS. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

30 30 WHITE AND TINTS

20 20A WHITE AND PASTEL TINTS

40 40A WHITE AND PASTEL TINTS

COPPER REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

CALCIUM INDICATOR LIQUID

ALVIN LAB METAL. Section 1: PRODUCT INFORMATION. Product uses: Metal patching compound. Chemtrec (24h).

Material Safety Data Sheet

TOTAL HARDNESS REAGENT

HI TEMP LAB METAL HT 14, HT 24

CALCIUM INDICATOR LIQUID

BESSEY SPATTER RELEASE SOLVENT BASED

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

ACID DEMAND REAGENT (ADR)

Material Safety Data Sheet

LIQUID HARDENER (MEKP)

SOLVENT BASED ANTI SPLATTER (AEROSOL)

DPD REAGENT #3. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

TOTAL HARDNESS REAGENT

SULFURIC ACID.24N. Section 1: PRODUCT INFORMATION

Material Safety Data Sheet

DPD REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

BASE DEMAND REAGENT (BDR)

DIAMOND KOTE LEATHER/VINYL RESTORER 118,6118

INACTIVE - MOBIL 1 0W-40

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

LABTONE MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

PINK LIQUID HAND SOAP

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

MAXIBOND CEMENT FLAMMABLE

BESA GLASS 2.1 VOC URETHANE CLEAR COAT

TECH RUB O MATIC AEROSOL

MATERIAL SAFETY DATA SHEET

PANGOFOL WHITE NON FLAMMABLE

MATERIAL SAFETY DATA SHEET

PANGOFOL BLACK NON FLAMMABLE

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

TECH CHEMICAL VULCANIZING FLUID

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

TECH BEAD SEALER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

- MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF PRODUCT

NYOGEL 781D. Product: 781D Revision Date: 2003/03/26. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T Prod.ID: ================== SECTION I - PRODUCT IDENTIFICATION================

SAFETY DATA SHEET KWIK SOLVE 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBER

PENNKOTE LIMITED 1950 BOUNDARY ROAD. - WHITBY, ONTARIO. L1N 8P8 BASE COMPONENT OF ALIPHATIC URETHANE COATING.

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date: 99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Cytology Fixative Spray

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION

Multi Purpose Thinner

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

MATERIAL SAFETY DATA SHEET PAGE 1

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

Silva Gal- MSDS (January 2008)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Section 3 Physical Data

MATERIAL SAFETY DATA SHEET

Bloomco/Division of Double B MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET

Aerosol Portion: faster than butyl acetate;immediate at temperatures above -35 C. Liquid Portion: slower than butyl acetate.

MATERIAL SAFETY DATA SHEET

CLEANBOOST MAXX (GASOLINE AND DIESEL ADDITIVE)

SAFETY DATA SHEET SR-48

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET PAGE 1

SAFETY DATA SHEET ECRF HARDENER (CH-ECRF-020, CH-ECRF-035) Date Prepared: July 18, 2016

SAFETY DATA SHEET PVC Cold Bond Cement (CC-PVC-001, CC-PVC-002, CC-PVC-010, CC-PVCF-200) Date Prepared: Aug 25, 2016

Material Safety Data Sheet

SAFETY DATA SHEET Lead Stop

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Transcription:

555 17 PEWTER Revision Date: 2013/04/09 Chemical family: Mixture. Section 1: PRODUCT INFORMATION Product uses: Low Voc Hi Heat resistant coating. Product name: 555 17 PEWTER. Manufacturer: Flame Control Coatings Inc. 4120 Hyde Park Blvd., P.O.Box 786 Niagara Falls, New York, 14305. Manufacturer emergency phone number: 800 535 5053 Supplier: Same as manufacturer. TDG classification: PAINT UN1263 Class 3 PG III. WHMIS classification: B2, D2A, D2B. DSL status: The substance(s) which appear in section 2 with CAS numbers appear on the Domestic Substances List. Supplier MSDS date: 2013/04/05. Section 2: HAZARDOUS INGREDIENTS C.A.S. CONCENTRATION % Ingrédient V.L.E. DL/50 CL/50 100 41 4 0.1 1.0 ETHYLBENZENE 100 PPM 3500 MG/KG >5000 MG/KG 123 86 4 15 30 N BUTYL ACETATE 150 PPM 10,768 MG/KG 4000 PPM/4H RABBIT INHALATION 55,000 MG/M3/2H 35,500 MG/M3/2H MOUSE INHALATION 390 PPM/4H 6000 MG/KG MOUSE ORAL 6000 MG/M3/2H MOUSE INHALATION 3200 MG/KG RABBIT ORAL >17,600 MG/KG 1330 20 7 15 30 XYLENE 100 PPM 4300 MG/KG 2119 MG/KG MOUSE ORAL >1700 MG/KG 1333 86 4 0.1 1.0 CARBON BLACK 3.5 MG/M3 >15,400 MG/KG 5000 PPM/4 HR NOT AVAILABLE >3,000 MG/KG 13463 67 7 7 15 TITANIUM DIOXIDE 10 MG/M3 NOT AVAILABLE NOT AVAILABLE 136 52 7 0.1 1.0 COBALT ALKANOATE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE 22464 99 9 0.1 1.0 ZIRCONIUM DRIER NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE 555 17 PE 555 17 PEWTER 1/6

540 88 5 5 10 TERT BUTYL ACETATE 200 PPM 4100 MG/KG >2000 MG/KG 98 56 6 1 5 PARACHLOROBENZOTRIFLUORIDE NOT AVAILABLE 13,000 MG/KG 11,500 MG/KG MOUSE ORAL >2230 MG/M3/4H 22,000 MG/M3 20,000 MG/M3 MOUSE INHALATION Section 2A: ADDITIONAL INGREDIENT INFORMATION Note: (supplier). CAS# 136 52 7: TLV 0.02 mg/m3. CAS# 22464 99 9: TLV 10 mg/m3. Physical state: Liquid. Section 3: PHYSICAL DATA Appearance & odor: Aromatic solvent odour. Pigmented. Pewter. Odor threshold (ppm): Not available. Vapour pressure (mmhg): @ 25 C. 34 Vapour density (air=1): Not available. Volatiles (%) By volume: 52% Evaporation rate (butyl acetate = 1): > 1. Boiling point ( C): > 98. Freezing point ( C): Not available. ph: Not applicable. Specific gravity @ 20 C: 1.1 1.2. Solubility in water (%): Insoluble. Coefficient of water\oil dist.: Not available. VOC: (material). 372 g/l. Flammability: Flammable. Section 4: FIRE & EXPLOSION DATA Conditions of flammability: Vapours are heavier than air and may travel along the ground and be ignited by flames, sparks or other ignition sources at locations distant from the material handling point. Heat, sparks and open flames. Vapours may cause flash fire. Extinguishing media: Dry chemical. Alcohol foam. Water fog. Carbon dioxide. 555 17 PE 555 17 PEWTER 2/6

Special procedures: Self contained breathing apparatus required. Firefighters should wear the usual protective gear. Use water spray to cool fire exposed containers. Auto ignition temperature ( C): Not available. Flash point ( C), method: Tag Closed Cup. 4.4 Lower flammability limit (% vol): 1.26 Upper flammability limit (% vol): 6.88 Explosion Data Sensitivity to static discharge: Take precautionary measures against static discharge. Sensitivity to mechanical impact: Not available. Hazardous combustion products: Carbon monoxide (CO). Carbon dioxide (CO2). Acids Aldehydes. Toxic and irritating vapours. Explosive power: May form explosive peroxides. Contact with oxidizers may cause fire or explosion. Section 5: REACTIVITY DATA Chemical stability: Stable under normal conditions. Conditions of instability: None known. Hazardous polymerization: Will not occur. Incompatible substances: Strong acids. Oxidizing agents. Perchlorates. Nitrates. Peroxides. Hypochlorites. Reactive metal compounds. Phosphorous compounds. Hazardous decomposition products: Carbon monoxide. Carbon dioxide. Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Eye contact, skin contact, skin absorption, inhalation and ingestion. Effects of acute exposure Eye contact: May cause pain. Severe irritant. May cause redness and tearing. May cause swelling. May cause itching. May cause irreversible corneal damage. 555 17 PE 555 17 PEWTER 3/6

Skin contact: May cause dermatitis. Irritant. May cause defatting. May cause drying and cracking. Skin absorption: May be harmful if absorbed through the skin. See inhalation effects. Inhalation: Harmful if inhaled. Irritation of the respiratory tract. May cause narcosis. May cause loss of appetite. Vapors may irritate nose, throat and eyes. May cause headache, dizziness and nausea. May cause fatigue. May cause tightness of the chest. Ingestion: May cause digestive tract irritation. May cause nausea, vomiting and diarrhea. May cause sore throat. Aspiration of material into lungs may cause chemical pneumonitis. May cause abdominal pain. Harmful or fatal if swallowed. Effects of chronic exposure: May cause conjunctivitis. May cause liver and kidney damage. May cause corneal damage. Prolonged occupational overexposure to solvents may lead to permanent brain and nervous system damage. May cause blood damage. May cause skin and eye damage. May cause damage to the gastrointestinal tract. Allergies may be aggravated by this product. May cause damage to upper respiratory tract. May cause damage to the central nervous system. Pre existing skin conditions may make the skin more susceptible to the effects of this product. May cause loss of coordination and mental confusion. LD50 of product, species & route: 11,400 mg/kg rat oral. > 20 ml/kg rabbit dermal. LC50 of product, species & route: Not available for mixture, see the ingredients section. Exposure limit of material: Not available for mixture, see the ingredients section. Sensitization to product: Yes Carcinogenic effects: Possible. Reproductive effects: May cause adverse reproductive effects. Teratogenicity: Yes Mutagenicity: Not available. Synergistic materials: Not available. 555 17 PE 555 17 PEWTER 4/6

Section 7: PREVENTATIVE MEASURES Precautionary Measures Gloves/Type: Nitrile rubber gloves. Respiratory/Type: Not necessary, if adequate ventilation provided. NIOSH approved respirator with organic vapor cartridge is required if ventilation is inadequate or exposure limits are exceeded. Eye/Type: Splash proof chemical goggles. Chemical safety glasses. Footwear/Type: Safety shoes per local regulations. Clothing/Type: Long sleeve shirt, long trousers. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: Exhaust ventilation. To maintain exposure below TLV. Leak/Spill: Eliminate all sources of ignition. Soak up with an absorbent material. Prevent entry into drains, sewers, and other waterways. Ventilate area. Wear appropriate protective equipment. Use non sparking tools. Store in closed metal containers until disposal. Waste disposal: Dispose in accordance with local, provincial/state, and federal regulations. Incineration is the preferred method. Handling procedures and equipment: Keep away from heat, sparks, and open flame. Avoid breathing vapors/mists. Use adequate ventilation. Wash thoroughly after handling. Empty containers containing residue may cause a hazard. Use proper grounding procedures. Avoid contact with skin, eyes and clothing. Bond and ground during transfer of liquid. Launder contaminated clothing prior to reuse. Storage requirements: Store away from incompatible materials. Keep out of direct sunlight. Keep away from heat, combustibles and reactive chemicals. Keep containers tightly closed. Store indoors. Store in a cool, dry and well ventilated area. Store in metal containers. Store in a sprinklered warehouse. 555 17 PE 555 17 PEWTER 5/6

TDG classification: PAINT UN1263 Class 3 PG III. Special shipping information: See transportation information. Section 8: FIRST AID MEASURES Skin contact: Remove contaminated clothing. Flush with large amounts of water, for at least 15 minutes. Seek medical attention if irritation persists. Eye contact: Immediately flush eyes with running water for a minimum of 15 minutes. Hold eyelids open during flushing. Obtain medical attention immediately. Inhalation: Remove victim to fresh air. If breathing is difficult administer oxygen. If not breathing, have qualified person give artificial respiration. Obtain medical attention. Ingestion: Do not induce vomiting, seek medical attention. Never give anything by mouth to an unconscious person. If conscious, give 3 4 glasses of water or milk. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Note to physician: Treat symptomatically. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety. This MSDS was generated by Conform Plus Application Service. Visit us at www.netmsds.com. 555 17 PE 555 17 PEWTER 6/6