eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com
ontent uni lex ON 15% Open Radius 1.6 page 3-10
Plastic Modular elt Series uni lex ON 15% Open (Radius 1.6) P elt POM-SX W ** Runng direction* *uni-chas reccomends this travel direction. However travel both directions is possible. **Please note that uni lex ON POM-SX blue is not accordg to the standard color quality for blue. Small variations may occur. elt width Permissible tensile force elt material Straight sections POM-SX urve sections P (Nomal) T Sideflexg belt Nomal pitch: 38.1 (1.50 ) Surface type: lat Surface openg: 15% ackflex radius: 50.0 (1.97 ) M. side radius R1.6 x belt width 38.1 1.50 6.6 0.26 10.0 0.39 T 19.1 0.75 5.9 0.23 - - - elt weight elt material POM-SX Size N lbf N lbf kg/m lb/ft *Recoended No. drive sprocket per shaft Number of wear strips (M no.) K750 190.5 7.50 2400 540 2000 450 2.6 1.75 2 2 2 K1200 304.8 12.00 4000 899 3400 764 4.1 2.76 3 2 2 K1400** 355.6 14.00 5600 1259 3400 764 4.7 3.16 3 2 2 K1500 381.0 15.00 6400 1439 3500 787 5.0 3.36 3 2 2 K1800 457.2 18.00 8200 1843 3600 809 6.2 4.17 5 2 2 Top view ottom view arry (pcs) Return (pcs) PITH 38.1 MM/1.50 IN SI LXING STNR K2400 609.6 24.00 12000 2698 3800 854 8.0 5.38 5 2 2 General belt tolerance is +0/-0.4% at 23 /73. *Max. Load per rive Sprocket. elt material: POM-SX 2500 N (562 lbf) **lex ON-K1400 is not available with any type of edge accessories 3
dge ccessories uni lex ON O Tab (xchangeable Outer Tab) O-Tab xchangeable Outer Tab POM K O 19.1 0.75 24.0 0.94 3.0 0.12 10.0 0.39 12.7 0.50 5.9 0.23 When usg the O Tab both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON OO Tab (xchangeable Outer Offset Tab) OO-Tab xchangeable Outer Offset Tab POM K O 16.5 0.65 24.0 0.94 3.0 0.12 11.0 0.43 12.7 0.50 9.0 0.35 When usg the OO Tab both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON Tab (xchangeable -Shape Tab) I H G J -Tab 19.1 0.75 37.5 1.48 3.0 0.12 10.5 0.41 12.7 0,50 xchangeable -Shape Tab POM-SX W G H I J 5.0 0.20 10.4 0.41 10.0 0.39 2.0 0.08 15.2 0,60 When usg the Tab, the width of both sides of the belt width will crease 1.00. 4
dge ccessories uni lex ON W (xchangeable Wearpart) W Wearpart xchangeable Wearpart POM K O 19.1 0.75 24.0 0.94 3.0 0.12 When usg the W both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON W (xchangeable Wearpart losed) Ri xchangeable Wearpart losed W Wearpart K750: POM K Y K1200, K1500, K1800: POM K Ri 308.8 12.00 O 19.1 0.75 24.0 0.94 3.0 0.12 609.6 24.00 K2400: POM K 975.4 38.40 When usg the W both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON R (xchangeable Roller) R material * xchangeable Roller SS 19.1 0.75 6.0 0.24 3.0 0.12 When usg the R both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. * istance from edge of belt to outside ball bearg. 5
Other accessories light I I H Standard belt Height (H) Indent (I) Lk Width size light POM-SX W * 25.4 1.00 32.0 1.26 K1200 304.8 12.00 * Please note that uni lex ON POM-SX blue is not accordg to the standard color quality for blue. Small variations may occur. Non Standard material and color: See uni Material and olor Overview. Other accessories lip On light H 25.0 0.98 lip On Rubber lat 50.0 1.97 4.0 0.16 H 19.0 0.75 lip On Rubber one 10.5 0.41 2.8 0.11 H H 6.8 0.27 Height (H) Standard materials & colors lip On light 10.0 0.39 POM- O lip On Rubber lat 5.5 0.22 POM- O + Rubber 01 K lip On Rubber one 6.8 0.27 POM- O + Rubber 01 K 6
esign Guideles uni lex ON O and O arry W + 31.0 (1.22 ) W + 3.0 (0.12 ) 4.5 0.18 8.0 0.31 18.0 0.71 W 14.0 0.55 uni lex ON O Usg the uni lex ON with O-Tab and a slotted wearstrip, the O-Tab will allow the transported products to be ider than the belt. O-Tabs are molded to the belt to ensure cleanability and are preferred for direct food contact. uni lex ON O (xchangeable O-Tab) xchangeable O-Tab system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. Usg a slotted wearstrip the exchangeable O-Tab will track the belt and allow the transported products to be wider than the belt. Resists high curve load at creased speed. esign Guideles uni lex ON O and O W + 31.0 (1.22 ) arry W + 3.0 (0.12 ) 8.0 0.31 10.0 0.39 W 14.0 0.55 uni lex ON OO (xchangeable Offset O-Tab) xchangeable O-Tab system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. Usg a slotted wearstrip the exchangeable O-Tab will track the belt and allow the transported products to be wider than the belt. Resists high curve load at creased speed. esign Guideles uni lex ON W + 3.0 (0.12 ) 8.0 0.31 W 7
esign Guideles uni lex ON W and R W + 3.0 (0.12 ) W - 17.0 (0.67 ) 10.0 1.39 arry 5.5 0.22 W 20.5 0.81 uni lex ON W (xchangeable Wearpart) xchangeable Wearpart system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. This Wearpart can easily be replaced. Resists high curve load at creased speed. uni lex ON R (xchangeable dge Roller) uni lex ON with xchangeable dge Rollers reduces friction curves to a mimum makg it very suitable for applications with many curves e.g. static spirals (non rotatg drum) or high speed sideflexg conveyors. esign Guideles uni lex ON W m ø30 m ø1¼ + m 12 + m ½ 100-150 4-6 Overall esign Guideles Layout Guideles m. 1.0 x W W m. 2.6 x W m. 1.6 x W G m. 2.0 x W m. 1.0 x W m. 6.2 x W Runng direction G m. 7.2 x W or m. conveyor dimensions please refer to sketch and diagram. 8
Sprocket No. of teeth Pilot ore 0.98 25.0 ore size 1.00 25.4 1.18 30.0 1.25 31.8 1.50 38.1 1.57 40.0 Overall diameter Pitch diameter Hub diameter imension imension Z08 101 3.98 99.6 3.93 60.0 2.36 36.5 1.44 59.0 2.32 Z09 113.7 4.48 111.4 4.39 70.0 2.76 42.8 1.69 64.9 2.56 Z09 113.7 4.48 111.4 4.39 74.0 2.91 42.8 1.69 64.9 2.56 Z11 138.8 5.46 135.2 5.32 70.0 2.76 55.4 2.18 76.9 3.03 Z11 138.8 5.46 135.2 5.32 74.0 2.91 55.4 2.18 76.9 3.03 Z12 151.2 5.95 147.2 5.80 70.0 2.76 61.6 2.43 82.9 3.26 Z12 151.2 5.95 147.2 5.80 74.0 2.91 61.6 2.43 82.9 3.26 Z13 163.6 6.44 159.2 6.27 70.0 2.76 67.8 2.67 88.9 3.50 Z13 163.6 6.44 159.2 6.27 74.0 2.91 67.8 2.67 88.9 3.50 Z16 200.5 7.89 195.3 7.69 70.0 2.76 86.3 3.40 107.0 4.21 Z16 200.5 7.89 195.3 7.69 74.0 2.91 86.3 3.40 107.0 4.21 Sgle row/one way Molded P6 LG Molded sprocket Molded sprocket Non standard material and color: See uni Material and olor Overview. Other sprocket sizes are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 9.0 (0.35 ) Width of sprocket = 39.0 (1.54 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. or correct sprocket position: See uni ssembly Instructions for uni lex ON. or more detailed sprocket formation, contact ustomer Service. 9
onveyor elts Seamless elts Modular elts Timg elts xpert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts uni lex ON/180502 abrication & service eraal eltech Modular /S Hjulmagervej 21 K-7100 Vejle T +45 7572 3100 +45 7572 3348 adm@unichas.com www.unichas.com 10
ate: 07.2016 onveyor elts Seamless elts Modular elts Timg elts xpert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts abrication & service Global Headquarters: eraal eltech Holdg.V. P.O. ox 38, 1700 Heerhugowaard The Netherlands T +31 72 575 1212 +31 72 571 6455 fo@aeraalbeltech.com