MADE-TO-ORDER SERIES CHAIN
|
|
- Christian Lyons
- 5 years ago
- Views:
Transcription
1 Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1 iamond B1 (one hole) B2 (one hole) ASME/ANSI Number Inches Max. S WI WO w P* P* Above attachments available for mutiple strand chain. Wide Contour Straight and Bent Attachment Chain Sw W PIC iamond WM-35 WCS1 (one hole) WM-35-2 WCS1 (two holes) imensions in Inches ASME/ANSI Number *35 *40 *41 *50 *60 *80 * 100 * 120 w w WM-1 WM-2 iamond WCS2 (one hole) WCS2 (two holes) w w P Max. Sw W WCS1 WCS2 Inches 1 w * Attachment available on pin link plate only. hese items not available with 48-hour delivery. WA-1 WA-2, A2 iamond WCB1 (one hole) WCB1 (two holes) WCB2 WCB1 Contact iamond Chain for available attachments on roller links (wide contour). Above attachments available for mutiple strand chain. W-1 W-2, 2 iamond WCB2 (one hole) WCB2 (two holes)
2 ouble- Bent Attachments Oval Contour ink Plates Standard and Oversized oller A WI WO MAE-O-OE - CAIN ESCIPIONS AN IMENSIONS A1 A2 imensions in Inches iamond B1 (one hole) B1 (two holes) *wo attachment holes stock. One attachment hole made-to-order. iamond M-35, SA1 S1 (one hole) M-35-2, SA2 S1 (two holes) *wo attachment holes stock. One attachment hole made-to-order. PIC B B PIC S1 1 S 1 2 iamond B2 (one hole) B2 (two holes) Standard oller arge oller ASME/ANSI # oller iam. Inches A B WI WO ASME/ANSI # oller iam. *C C-2042 *C C-2052 *C C *C C *C C *C C *C C ouble- Straight Attachments Oval Contour ink Plates Standard and Oversized oller imensions in Inches Standard oller With wo* Attachment oles With One Attachment ole iamond M-1, S1 S2 (one hole) M-2, S2 S2 (two holes) arge oller ASME/ oller ASM E / oller ANSI # iam. Inches B S 1 S1 ANS I # iam. *C C-2042 *C C-2052 *C C *C C *C C *C C *C C
3 Standard Extended Pins For ASME / ANSI Standard Series Chains and ouble- Conveyor Chains 1 3 iamond E1 (one extended pin) E2 (two extended pins) MAE-O-OE - CAIN ESCIPIONS AN IMENSIONS ASME/ ANSI # Inches ±.0005" ±.010" Wide-all ugs imensions in Inches ASME/ ANSI # Inches ±.0005" ±.010" ASME/ANSI # Inches ±.0005" ±.010" C-2040, C C-2050, C C-2060, C C-2080, C C-2100, C ASME/ANSI # Inches (max.) OA
4 ouble Straight ugs ouble Bent ugs MAE-O-OE - CAIN ESCIPIONS AN IMENSIONS imensions in Inches ASME/ 2 2 P S /2 ANSI # Inches Consult iamond Chain for extended pitch chain, double straight and double bent attachment availabliity.
5 Extended Pins Standard esign Plain End Extended Available Made-o-Order MAE-O-OE - CAIN ESCIPIONS AN IMENSIONS Medium Carbon Steel imensions in Inches Available Made-o-Order ASME/ANSI E E Number Inches C CE C MA. S. G GE G GW P E C C Stainless imensions in Inches iamond E. E. Number Inches C CE C MA. S. G GE G GW P E 25 SS SS SS SS SS SS SS
6 ength Matching of oller Chains conveyor or transfer type system. In these cases it is critical to have the chains ordered as a set, matched for length and installed on the machinery with the same relationship to one another as when they were manufactured. MAE-O-OE - CAIN ESCIPIONS AN IMENSIONS Class I - A Class I match assures that the longest and the shortest chain in a given set will not vary in overall length by more than.006"/ft. Again using #80 chain as an example, the length of two #80 chains 120 pitches long will not vary by more than.060" in overall length (10ft. x.006"/ft. =.060"). he shortest could measure 120" +.000" (remember, no negative tolerance) and the longest could measure up to 120" +.060" and satisfy the Class I requirement. Class I matching is most often accomplished by assembling the chains from selected lots of component parts. Class II - A Class II match is much more stringent and assures that the longest and the shortest chain in a given set will not vary in overall length by more than.002"/ft. Applying this new tolerance to the above example, the length of two #80 chains 120 pitches long will not vary by more than.020" in overall length (10ft. x.002"/ft. =.020"). he shortest could measure 120" +.000" and the longest could measure 120" +.020" and to one another. If you ever have any questions, give us a call. We re always glad to help. Specialty/Made-o-Order Attachments imensions in Inches Note: Chain ole Screw Screw Size iameter Size iameter 25 # # #5 41 #5 50 # # Attachment ole Sizes: holes may be available. imensions in Inches Chain ole Screw Screw Size iameter* Size iameter C2040 # 5 C2050 # C2060 # C C C C *Straight, one hole attachments have larger diameters than shown. efer to ouble- Straight and Bent Attachment tables for more detail. Assembly: While it is possible to purchase base chain or attachment components and construct an attachment chain, it is strongly recommended ments. alternate lug
D O U B L E - P I T C H POWER TRANSMISSION AND CONVEYOR ROLLER CHAIN 19 AT TACHMENT CHAIN ASME/ANSI STA N D A R D 23
BUILDING THE LONGEST LASTING ROLLER CHAIN H I S T O RY 2 ISO 9001 4 Chain Components 6 Manufacturing Process 6 CHAIN PERFORMANCE 10 Why Use Roller Chain? 11 Cost Comparison Work Sheet 12 S TANDARD AND
More informationRoller Link Plate Pin Link Plate Roller Bushing Pin. Closed type Connecting Link
chain consists of roller links and pin links in series. RIVEE CHAIN COERE CHAIN chain ARS & LINKS. Link late in Link late Bushing in CONNECION OF ROLLER CHAIN Connecting Link Offset Link Spring clip type
More informationOIL FIELD ROLLER CHAIN
OIL FIL OLL AI OIL FIL OLL AI AI SIPTIOS A IMSIOS oller chains used in the oil and gas industry are subject to some of the greatest operating loads and harshest environments. iamond hain OLL WIT O L L
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationAsphalt Batch Plant Processing
Asphalt atch Plant Processing ngineered for Asphalt Operations www.ustsubaki.com Asphalt Chain www.ustsubaki.com Asphalt is tough! ard aggregates, shock loads, intense heat, and almost around-the-clock
More informationQ Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket
Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22
More informationSKF Transmission chain
SKF ransmission chain Standard and compliance SKF s are manufactured in state of the art facilities. ight quality controls are employed to assure product conformance to the ISO standards and the existing
More informationSTRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains
812 815 STRAIGHT RUNNING CHAIN Series 1874 GV Sideflexing steel gripper chains 1874 GV GRIPPER CHAINS with vulcanized rubber pads 9.5 3.1 23.8 31.8 SC 56.5 21 17 7 19.05 19.05 Ø 5.08 Ø 11.91 14.35 25 12.7
More informationRexnord 815 TableTop Chain
815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information
More informationBronze-Plated Wear Plates
Slide ction omponents ronze-plated Wear Plates ronze-plated Wear Plates WP -M-E ronze-plated Wear Plates provide a long-lasting wear surface for ronze- Plated molds requiring slides, cams or flat surfaces
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationForestry Chain. Forestry
sec Forest Forestry 11/19/08 9:57 M Page 158 Forestry Renold Jeffrey ngineering lass s for the forestry and paper industries are built to move materials in demanding conditions. Our 81X onveyor s and Welded
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationDiamond Oil Field PRoduct Guide Agriculture Product Guide
Diamond Oil ield oduct Guide Agriculture roduct Guide able of ontents Diamond Series Standard Series 4 Heavy Series 4 Double 5 ower ransmission hain 5 onveyor hain 5 Sapphire Series Standard Series 6 Heavy
More informationHoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
More informationdon't print this page!
don't print this page! www.ustsubaki.com Markets and Applications U.S. Tsubaki sprockets are utilized worldwide in many markets and applications, including: Oil and Gas Lumber Mining Primary Metals Material
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More informationTRU-WELD Stud Welding
HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head iameter (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. iameter ength TRU WE
More informationCommercial Chain & Fittings
Commercial Chain & Fittings 2 IWR Lifting PW Anchor Herc-Alloy 800 The most effective link from the factory floor to the farm esigned to solve almost any suspending, mooring or fencing challenge, PW Anchor
More informationROCKSOLID SINGLE POST ANCHOR
ROCKSOLID SINGLE POST ANCHOR INSTALLATION INSTRUCTIONS YOU MUST USE THE ANCHOR SET TOOL (PART #27-109) TO INSURE PROPER INSTALLATION SRS AUSTRALIA, PTY LTD 12 Enterprise St Richlands QLD 4077 Australia
More informationNUT EYEBOLTS Available in 304 & 316 Stainless Steel
Forged Industrial Hardware NUT EYEBOLTS Available in 304 & 316 Stainless Steel In Stock / Immediate Delivery No Minimums Plain and Shoulder Pattern Available Sizes: Plain: 1/4-2 to 24 Shoulder: 1/4-1-1/2
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationTechnical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
More information2000-SERIES MODULAR BELTS
2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/8"- /4" and 00 for 7/32"-3/4", are recommended
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationCrossed Roller Bearings Series Crossed Roller Bearings Series:
Crossed Roller Bearings Series Crossed Roller Bearings Series: Proprietary 2V Grinding Technology 102 Crossed Roller Bearing Series: Overview High Precision Bearing Sets Proprietary 2V Grinding Technology
More informationSeamless or welded stainless steel tube, depending on outer diameter (see dimensions). TP316L / /
Material imensions Technical terms of elivery Tubes ength Fittings Tolerances W el ens Seamless or wele stainless steel tube, epening on outer iameter (see imensions). TP316 / 1.4404 / 1.4435 Stock imensions:
More informationTC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length
SERIES HREAMIING hreamilling Insert Nomenclature hart I 15 N 8 UN I threamilling insert insert length 75.750 1 1.000 1.5 1.500 hreamilling utter Nomenclature hart type of insert N P Neutral Positive threa
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationPRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
More informationVESSEL & REACTOR VALVES. VS Series SPRAY & RINSE VALVES PROCESS VALVES
VS Series VESSEL & REACTOR VALVES SPRAY & RINSE VALVES PROCESS VALVES CLEANING VESSELS OR REACTORS WITHOUT OPENING TO ATMOSPHERE Spray & Rinse Valves Code: VRR-VRS Automatic models use an electric or air
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring
More informationCHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT
CHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT PRECISION ROLLER CHAIN The entire range of precision roller chain meets
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Conveyor Wear Bed T- Chain Guides and Wear Beds Valu Guide rail can be used as a guide or wear strip for wide
More informationPrecision Power Transmission Roller Chains, Attachments, and Sprockets
ASME B29.1-2011 (Revision of ASME B29.1 and Partition From ASME B29.100-2002) Precision Power Transmission Roller Chains, Attachments, and Sprockets AN AMERICAN NATIONAL STANDARD ASME B29.1-2011 (Revision
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationTECHNICAL DATA OBSOLETE
June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
More informationINTERNATIONAL EQUIPMENT COMPONENTS, INC. & KNOB & HANDLE CLAMP ADJUST STABILIZE FASTEN. Ph
INERNAIONA EQUIPMEN COMPONENS, INC. www.levelingmounts.com & www.iec-corp.com KNOB & ANE Ph. 562.597.4533 CAMP AJUS SABIIZE FASEN elcome... e re pleased to introduce our new line of Adjustable andles and
More informationConveyor system X85 - links and chains
Conveyor system X85 - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Plain chain Material abbreviations: see page. X5 X5H
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationDesign of Pressure vessel for the Hydrocarbon release from the Vent Header Lines
Design of Pressure vessel for the Hydrocarbon release from the Vent Header Lines Bhargav Mangesh Joshi 1 1Student, Department of mechanical engineering, Modern college of engineering, Pune-5 ---------------------------------------------------------------------***---------------------------------------------------------------------
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationPRESSURE REGULATORS GAS PRESSURE REDUCING
GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY
More informationThreadmilling Insert Nomenclature Chart TI. INSERT TYPE N Neutral P Positive INSERT LENGTH
HREAMIING 182 SERIES HREAMIS hreadmilling Insert Nomenclature hart I hreadmill Insert 15 INSER ENGH 75.750 1 1.000 1.5 1.500 S 15 N INSER YPE N Neutral P Positive hreadmilling utter Nomenclature hart 8
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationBS Conveyor Chain - Hollow Bearing Pin Chain
S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.
More informationROCKSOLID DUAL POST ANCHOR
ROCKSOLID DUAL POST ANCHOR INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334
More informationM2 Antenna Systems, Inc. Model No: VLP16
M2 Antenna Systems, Inc. Model No: 100-600VLP16 SPECIFICATIONS: Model... 100-600VLP16 Frequency Range... 100-600 MHz Cont. *Gain... 9.64 dbi Front to back... 12 db Typical Beamwidth... E=64 / H=70 Feed
More informationPRESSURE REGULATORS GAS PRESSURE REDUCING
GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY
More informationConveyor system XS - links and chains
Conveyor system XS - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationUSSSA C National Championships Skills Competition
Skills Thank you for participating in the. This information is in regards to the Skills that will be held on July 18. There are ample opportunities in this skills competition, and we hope that you take
More informationB34 Series Regulator Commercial and Industrial Regulator
B34 Series Regulator Commercial and Industrial Regulator Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the B34 is particularly
More informationOver twenty years of experience, engineering expertise. and dynamic growth has given PENCOM. as one of the foremost global suppliers to the fastener
SCREW BOOK Over twenty years of experience, engineering expertise and dynamic growth has given PENCOM the reputation as one of the foremost global suppliers to the fastener industry. PENCOM prides itself
More information61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
More informationTSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance
TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing
More informationHealth & Safety Policy and Procedures Manual SECTION 25 RIGGING AND HOISTING EQUIPMENT
SECTION 25 RIGGING AND HOISTING EQUIPMENT 1. RIGGING AND HOISTING: These rules apply to all Maul Electric, Inc. employees and subcontractors. Note: Maul Electric, Inc. employees will utilize mechanical
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationTHREADED ROD & ACCESSORIES. Superior strength, maximum versatility.
Superior strength, maximum versatility. GRTRBRO 12/2013 Threaded rod is used for general purpose fastening and installation. Used in any place that a long bolt is required, threaded rod can be cut to the
More informationNEW PRODUCTS RANGE
NEW PRODUCTS RANGE 2016-17 The new Makefast phone App, that lets you take control Tel. +44 (0)1686 629010 Fax. +44 (0)1686 626700 Email. sales@makefast.com www.makefast.com Makefast s Makeswitch App Makefast
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationRexnord 815 TableTop Chain Straight Running
Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationStainless Steel Fittings & Valves for Pneumatic Applications. ...Make the leak free connections with Sealexcel products at economical price...
Stainless Steel Fittings & Valves for neumatic Applications...Make the leak free connections with Sealexcel products at economical price... he secret of our success is our engineering expertise, product
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More information180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
More informationSPOKES & NIPPLES FOR BICYCLE 2017
SPOKES & NIPPLES FOR BICYCLE 2017 HISTORY AND PRESENT Based in Lomagna, in the heart of Lombardy, Alpina Raggi S.p.A. was founded in 1926 and focusses its activity on the production of spokes and nipples.
More informationCOMPAFLOW. Compressed Air. Volumetric flow. Gas. Mass flow. Steam. Net volumetric flow. Liquid
Volumetric flow Compressed Air Mass flow Gas Net volumetric flow Steam Liquid Universal compact orifice flow meter combines a compact orifice flow sensor and sotiphicated converter One-piece flow sensor,
More informationPilot Assembly Motor Valve Stem Assembly Upstream Pressure Downstream Pressure Motor Valve Diaphragm Pressure. Adjusting Screw.
GAS PRESSURE REDUCING BALANCED APPLICATIONS: Regulation of inlet pressure to gas compressors and control of supply or distribution system pressures where the pressure to the regulator varies significantly
More informationPRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS INSTALLATION MANUAL CONTROL VALVES
PRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS CONTROL VALVES INSTALLATION MANUAL TABLE OF CONTENTS Receiving & Handling 3 Basic Handling Continued 4 Approved Lifting Methods 5 Installing Pressure
More informationCK Series. 3-way jaw long stroke chuck double acting/single acting. Operational stroke length: 20, 40mm. Specifications. Switch specifications
RV* G G A S F J H2 LB2 N/ S/F Specifications Size Cylinder bore size Actuation Working fluid Max. working pressure Min. working pressure Ambient temperature Port size MPa MPa C Operational stroke length
More informationRCS Rupture Disc Assembly
RCS Rupture Disc Assembly 3-2225-3 The RCS Rupture Disc is a reverse acting, cross-scored rupture disc. It is a non-reclosing differential pressure relief device that provides instantaneous full opening
More informationLiftAlloy TM Chain Slings
LiftAlloy TM LiftAlloy CHAIN SLING BASICS Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations LiftAlloy chain slings, available in grade 00 for 7/32" through 3/4",
More informationPRESSURE REGULATORS GAS BACK PRESSURE NON VENTING
GAS BACK PRESSURE NON VENTING APPLICATION: Vent lines or pressure regulation on separators, heater treaters, compressor stations, gas gathering and distribution systems where it is desired that no gas
More informationMaterials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
More informationRexnord and Link-Belt Engineered Steel Chains I Catalog. Conveyor, Elevator & Drive Chains
Rexnord and Link-elt ngineered Steel hains I atalog onveyor, levator & rive hains ontents Introduction Introduction 2- Special pplication hain Special pplication hain 4-9 ngineered Steel hain ngineered
More informationStainless Steel Accessories
Stainless Steel Accessories Single Sleeves (stainless steel) Rope Weight ea. BSS505-516 5/16 0.2 BSS505-038 3/8 0.2 BSS505-716 7/16 0.3 BSS505-012 1/2 0.3 BSS505-058 5/8 0.8 BSS505-034 3/4 1 BSS505-078
More informationConveyor system XM - links and chains
Conveyor system XM - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain
More informationGeneral page Straight unions page Angle unions page Tee and L-unions page Gauge connection unions page 42
C 2610-00 Table of contents General page 3-13 DILO unions for pressure ranges from 100 320 bar Straight unions page 14-25 Weld-on tube unions page 14-16 Screw-in tube unions page 17-25 with metric / Whitworth-
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationDual Sprocket Conveyor Chain
SACEA Strategic Theme 2015 The relationship between man and machine and compliance to changing legislation South African Colliery Engineers Association Technical Symposium Secunda Club - Thursday 25 June
More informationDELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS
DELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231
More informationaccessories cleats shackle & pad-eyes toe-rail roller bearings promotional items model index...
accessories cleats... 174 shackle & pad-eyes... 176 toe-rail... 178 roller bearings... 179 promotional items... 180 model index...188-173 - roller cleat mod. RC280/SI mod. RC280/ 1. 2. 3. 4. Roller is
More informationNorval Pressure Regulators
Pressure Regulators Pressure regulators NORVAL pressure regulators are balanced direct acting devices for low and medium pressure applications controlled by a diaphragm and counter spring. These regulators
More information