Cable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
|
|
- Branden Turner
- 5 years ago
- Views:
Transcription
1 able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E cable gland is a device that allows the user to pass a cable, wire or tube into an enclosure while providing strain relief and sealing out dust, dirt and liquids. Mencom offers a wide variety of cable glands, from very small (PG7) to very large (M63). Our line of cable glands include plastic and metal varieties with NPT, Metric and PG threading and they are rated to IP68 up to 5 bar that can be used permanently under water up to 5 atmospheres. The sealing around the cable is achieved through the sealing grommet. The sealing against the enclosure is achieved through either an O-Ring (all metal glands and PG29 and larger plastic glands), or, through some raised rings on the underside of the hex nut (all plastic glands up to and including PG21). Special pplications able Glands & dapters Mencom orporation
2 able Glands RoHS ompliance ontents NPT Threads Plastic ccessories Nuts PG Threads Plastic Plastic Right ngle lamping ccessories Nuts dapters Reducers & Enlargers Metric Threads Plastic ual Grommet Plastic Plastic ccessories Nuts Plugs dapters Reducers & Enlargers able Glands & dapters Other able Glands Multi-Hole able Gland Inserts O-Rings Flat & Festoon able PG Holes Metric Holes ~ able Entry System Plate KP Mencom orporation
3 able Glands NPT Threads able Glands Part Number L Rating iameter Range mm (Inches) Mounting Hole learance Thread Length Wrench Flats MG-3/8 L Recognized 3-9 ( ) 17.1 (0.675) 3/8" NPT 8 (0.315) 20 (0.79) MG-1/2 L Recognized 5-13 ( ) 21.0 (0.825) 1/2" NPT 10 (0.394) 24 (0.94) MG-3/4 L Recognized 8-16 ( ) 26.7 (1.050) 3/4" NPT 11 (0.433) 30 (1.18) MG-1.0 L Recognized ( ) 34.3 (1.350) 1" NPT 14 (0.551) 40 (1.57) MG-1.25 L Recognized ( ) 41.9 (1.650) 1.25" NPT 14 (0.551 ) 50 (1.97) MG-1.5 L Recognized ( ) 49.5 (1.950) 1.5" NPT 15 (0.591) 55 (2.17) MG-2.0 L Recognized ( ) 61.0 (2.400) 2" NPT 15 (0.591) 65 (2.56) Mencom able Glands are easy to use and provide a good strain relief and water tight seal for round cables. The cable glands are rated up to IP 68 (comparable to NEM 6P). The glands have a wide clamping range. Mencom EMI able Glands provide an easy way to ground the shield from a shielded cable to the body of the metal cable gland. The seal rating is IP 68 (comparable to NEM 6P). NPT style cable glands are not supplied with nuts. Nuts can be ordered separately, see page -5. Insert: Polyamide able Glands & dapters Mencom orporation
4 able Glands NPT Threads able Glands Gray lack L Rating iameter Range mm (Inches) Mounting Hole learance Thread Type Thread Length Wrench Flats PG-3/8R PG-3/8R- L Recognized 3-7 ( ) 17.1 (0.675) 3/8" NPT 15.5 (0.610) 22 (0.87) PG-3/8 PG-3/8- L Recognized 5-10 ( ) 17.1 (0.675) 3/8 NPT 15.5 (0.610) 22 (0.87) PG-1/2X PG-1/2X- L Recognized 5-9 ( ) 21.0 (0.825) 1/2" NPT 14.5 (0.571) 24 (0.94) PG-1/2Y PG-1/2Y- L Recognized 6-12 ( ) 21.0 (0.825) 1/2" NPT 14.5 (0.571) 24 (0.94) PG-1/2R PG-1/2R- L Recognized 7-12 ( ) 21.0 (0.825) 1/2" NPT 15 (0.591) 27 (1.06) PG-1/2 PG-1/2- L Recognized ( ) 21.0 (0.825) 1/2" NPT 15 (0.591) 27 (1.06) PG-1/2E PG-1/2E- L Recognized ( ) 21.0 (0.825) 1/2" NPT 15 (0.591) 33 (1.30) PG-3/4R PG-3/4R- L Recognized 9-16 ( ) 26.7 (1.050) 3/4" NPT 15 (0.591) 33 (1.30) PG-3/4 PG-3/4- L Recognized ( ) 26.7 (1.050) 3/4" NPT 15 (0.591) 33 (1.30) PG-1.0R PG-1.0R- L Listed ( ) 34.3 (1.350) 1" NPT 18 (0.709) 42 (1.65) PG-1.0 PG-1.0- L Recognized ( ) 34.3 (1.350) 1" NPT 18 (0.709) 42 (1.65) PG-1.25R PG-1.25R- L Recognized ( ) 41.9 (1.650) 1.25" NPT 18 (0.709) 53 (2.09) able Glands & dapters PG-1.25 PG L Listed ( ) 41.9 (1.650) 1.25" NPT 18 (0.709) 53 (2.09) Mencom able Glands are easy to use and provide a good strain relief and water tight seal for round wide clamping range. -4 Mencom orporation
5 able Glands NPT Threads able Gland ccessories Nuts Plastic Metal IP68 Rating Plastic Nuts Gray lack 238P 238P/SW 3/8 NPT 22 (0.87) 5 (0.20) 212P 212P/SW 1/2 NPT 27 (1.06) 6 (0.24) 234P 234P/SW 3/4 NPT 36 (1.42) 7 (0.28) 210P 210P/SW 1 NPT 42 (1.65) 7 (0.28) Material: Polyamide Metal Nuts 214M 1/4 NPT 17.5 (0.69) 3.3 (0.13) 238M 3/8 NPT 20.1 (0.79) 3.0 (0.12) Material: 212M 1/2 NPT 28.4 (1.12) 3.3 (0.13) 234M 3/4 NPT 35.1 (1.38) 3.8 (0.15) able Glands & dapters 210M 1 NPT 42.9 (1.69) 5.1 (0.20) Material: Mencom orporation
6 able Glands PG Threads able Glands Part Number iameter Range mm (Inches) Mounting Hole learance Thread Length Wrench Flats MG-07R 2-5 ( ) 12.7 (.500) PG 7 5 (.197) 14 (.551) MG ( ) 12.7 (.500) PG 7 5 (.197) 14 (.551) MG-09R 2-6 ( ) 15.4 (.606) PG 9 6 (.236) 17 (.669) MG ( ) 15.4 (.606) PG 9 6 (.236) 17 (.669) MG-11R 3-7 ( ) 18.8 (.740) PG 11 6 (.236) 20 (.787) MG ( ) 18.8 (.740) PG 11 6 (.236) 20 (.787) MG-13.5R 5-9 ( ) 20.7 (.815) PG (.256) 22 (.866) MG ( ) 20.7 (.815) PG (.256) 22 (.866) MG-16R 7-12 ( ) 22.8 (.900) PG (.256) 24 (.945) MG ( ) 22.8 (.900) PG (.256) 24 (.945) MG-21R 9-16 ( ) 28.6 (1.125) PG 21 7 (.276) 30 (1.181) MG ( ) 28.6 (1.125) PG 21 7 (.276) 30 (1.181) MG-29R ( ) 37.4 (1.475) PG 29 8 (.315) 40 (1.575) MG ( ) 37.4 (1.475) PG 29 8 (.315) 40 (1.575) MG-36R ( ) 47.5 (1.870) PG 36 9 (.354) 50 (1.968) MG ( ) 47.5 (1.870 PG 36 9 (.354) 50 (1.968) MG-42R ( ) 54.5 (2.145) PG (.394) 57 (2.244) able Glands & dapters MG ( ) 54.5 (2.145) PG (.394) 57 (2.244) MG-48R ( ) 59.8 (2.354) PG (.394) 64 (2.520) MG ( ) 59.8 (2.354) PG (.394) 64 (2.520) Mencom cable glands are easy to use and provide a good strain relief and water tight seal for round cables. The cable glands are rated up to IP 68 (comparable to NEM 6P). The glands have a wide clamping range. Insert: Polyamide -6 Mencom orporation
7 able Glands PG Threads able Glands Gray lack L Rating iameter Range mm (Inches) Mounting Hole learance Thread Type Thread Length Wrench Flats PG-07R PG-07R- N/ 2-5 ( ) 12.7 (.500) PG 7 8 (.315) 15 (.591) PG-07 PG-07- L Recognized ( ) 12.7 (.500) PG 7 8 (.315) 15 (.591) PG-09R PG-09R- N/ 2-6 ( ) 15.4 (.606) PG 9 8 (.315) 19 (.748) PG-09 PG-09- L Recognized 4-8 ( ) 15.4 (.606) PG 9 8 (.315) 19 (.748) PG-11R PG-11R- N/ 3-7 ( ) 18.8 (.740) PG 11 8 (.315) 22 (.866) PG-11 PG-11- L Recognized 5-10 ( ) 18.8 (.740) PG 11 8 (.315) 22 (.866) PG-13.5R PG-13.5R- L Recognized 5-9 ( ) 20.7 (.815) PG (.354) 24 (.945) PG-13.5 PG L Recognized 6-12 ( ) 20.7 (.815) PG (.354) 24 (.945) PG-16R PG-16R- N/ 7-12 ( ) 22.8 (.900) PG (.394) 27 (1.06) PG-16 PG-16- L Listed ( ) 22.8 (.900) PG (.394) 27 (1.06) PG-21R PG-21R- N/ 9-16 ( ) 28.6 (1.125) PG (.433) 33 (1.30) PG-21 PG-21- L Recognized ( ) 28.6 (1.125) PG (.433) 33 (1.30) PG-29R PG-29R- L Listed ( ) 37.4 (1.475) PG (.433) 42 (1.65) PG-29 PG-29- L Listed ( ) 37.4 (1.475) PG (.433) 42 (1.65) PG-36R PG-36R- L Listed ( ) 47.5 (1.870) PG (.512) 53 (2.09) PG-36 PG-36- L Listed ( ) 47.5 (1.870) PG (.512) 53 (2.09) PG-42R PG-42R- L Listed ( ) 54.5 (2.145) PG (.512) 60 (2.36) PG-42 PG-42- L Listed ( ) 54.5 (2.145) PG (.512) 60 (2.36) PG-48R PG-48R- L Listed ( ) 59.8 (2.354) PG (.552) 65 (2.60) PG-48 PG-48- L Listed ( ) 59.8 (2.354) PG (.552) 65 (2.60) Mencom able Glands are easy to use and provide a good strain relief and water tight seal for round clamping range. able Glands & dapters Insert: Polyamide Mencom orporation
8 able Glands PG Threads able Glands Plastic Right ngle able Glands PG Threads IP68 Rating Part Number iameter Range mm (Inches) Mounting Hole learance Thread Type Thread Length Height Length F Wrench Flats G Wrench Flats PG-07R 2-6 ( ) 12.7 (0.500) PG 7 8 (0.315) 26 (1.02) 38.5 (1.516) 15 (0.591) 19 (0.748) PG ( ) 12.7 (0.500) PG 7 8 (0.315) 26 (1.02) 38.5 (1.516) 15 (0.591) 19 (0.748) PG-09R 3-7 ( ) 15.4 (0.606) PG 9 8 (0.315) 29 (1.14) 47 (1.850) 19 (0.748) 22 (0.866) PG ( ) 15.4 (0.606) PG 9 8 (0.315) 29 (1.14) 47 (1.850) 19 (0.748) 22 (0.866) PG-11R 5-7 ( ) 18.8 (0.740) PG 11 8 (0.315) 31.3 (1.23) 51 (2.008) 22 (0.866) 24 (0.945) PG ( ) 18.8 (0.740) PG 11 8 (0.315) 31.3 (1.23) 51 (2.008) 22 (0.866) 24 (0.945) PG-13.5R 7-12 ( ) 20.7 (0.815) PG (0.354) 34 (1.34) 54.7 (2.154) 24 (0.945) 27 (1.063) PG ( ) 20.7 (0.815) PG (0.354) 34 (1.34) 54.7 (2.154) 24 (0.945) 27 (1.063) PG ( ) 22.8 (0.900) PG (0.394) 38.2 (1.50) 57 (2.241) 27 (1.063) 29 (1.142) PG ( ) 28.6 (1.125) PG (0.433) 45.7 (1.80) 71 (2.795) 33 (1.299) 36 (1.417) PG ( ) 37.4 (1.475) PG (0.433) 57 (2.24) 85 (3.346) 42 (1.654) 46 (1.811) able Glands & dapters Mencom able Glands are easy to use and provide a good strain relief and water tight seal The glands have a wide clamping range. F G -8 Mencom orporation
9 able Glands PG Threads able Glands Part Number iameter Range mm (Inches) Mounting Hole learance Thread Length Wrench Flats MG-07R 2-5 ( ) 12.7 (.500) PG 7 5 (.197) 14 (.551) MG ( ) 12.7 (.500) PG 7 5 (.197) 14 (.551) MG-09R 2-6 ( ) 15.4 (.606) PG 9 6 (.236) 17 (.669) MG ( ) 15.4 (.606) PG 9 6 (.236) 17 (.669) MG-11R 3-7 ( ) 18.8 (.740) PG 11 6 (.236) 20 (.787) MG ( ) 18.8 (.740) PG 11 6 (.236) 20 (.787) MG-13.5R 5-9 ( ) 20.7 (.815) PG (.256) 22 (.866) MG ( ) 20.7 (.815) PG (.256) 22 (.866) MG-16R 7-12 ( ) 22.8 (.900) PG (.256) 24 (.945) MG ( ) 22.8 (.900) PG (.256) 24 (.945) MG-21R 9-16 ( ) 28.6 (1.125) PG 21 7 (.276) 30 (1.181) MG ( ) 28.6 (1.125) PG 21 7 (.276) 30 (1.181) MG-29R ( ) 37.4 (1.475) PG 29 8 (.315) 40 (1.575) MG ( ) 37.4 (1.475) PG 29 8 (.315) 40 (1.575) MG-36R ( ) 47.5 (1.870) PG 36 9 (.354) 50 (1.968) MG ( ) 47.5 (1.870) PG 36 9 (.354) 50 (1.968) MG-42R ( ) 54.5 (2.145) PG (.394) 57 (2.244) MG ( ) 54.5 (2.145) PG (.394) 57 (2.244) MG-48R ( ) 59.8 (2.354) PG (.394) 64 (2.520) MG ( ) 59.8 (2.354) PG (.394) 64 (2.520) Mencom EMI able Glands provide an easy way to ground the shield from a shielded cable to the body of the metal cable gland. The seal rating is IP 68 (comparable to NEM 6P). Insert: Polyamide able Glands & dapters Mencom orporation
10 able Glands PG Threads able Glands iameter Range RSS ( ) PG 9 RSS ( ) PG 11 RSS ( ) PG 13.5 RSS ( ) PG 16 RSS ( ) PG 21 RSS ( ) PG 29 RSS ( ) PG 36 RSS ( ) PG 42 RSS ( ) PG 48 RSS Series The seal is achieved with a neoprene sealing ring (with multiple perforations these must be ordered separately. Protection to IP 55. able Glands & dapters -10 Mencom orporation
11 able Gland ccessories PG Threads able Gland Nuts Nuts Plastic Metal PG Threads Plastic Nuts Gray lack Thread Type 207P 207P/SW 19 5 PG 7 209P 209P/SW 22 5 PG 9 211P 211P/SW 24 5 PG P 213P/SW 27 6 PG P 216P/SW 30 6 PG P 221P/SW 36 7 PG P 229P/SW 46 7 PG P 236P/SW 60 8 PG P 242P/SW 65 8 PG 42 Material: Polyamide 248P 248P/SW 70 8 PG 48 Metal Nuts 207M PG 7 209M PG 9 211M 21 3 PG M 23 3 PG 13.5 Standard Metal Nut 216M 26 3 PG M PG M 41 4 PG 29 utting Metal Nut 236M 51 5 PG M 65 5 PG M PG MPOT PG 7 209MPOT PG 9 211MPOT 21 3 PG MPOT 23 3 PG MPOT 26 3 PG MPOT PG 21 Material: able Glands & dapters 229MPOT 41 4 PG 29 1mm 236MPOT 51 5 PG MPOT 65 5 PG 42 Material: 248MPOT PG 48 Mencom orporation
12 able Glands ccessories PG Threads able Gland Plugs Plastic lanking Plugs Gray lack iameter Thread Length R-07P R-07P/SW 15 6 PG 07 R-09P R-09P/SW 19 6 PG 09 R-11P R-11P/SW 22 6 PG 11 R-13.5P R-13.5P/SW 25 6 PG 13.5 R-16P R-16P/SW 27 6 PG 16 R-21P R-21P/SW 33 8 PG 21 R-29P R-29P/SW PG 29 R-36P R-36P/SW PG 36 Polystyrene R-42P R-42P/SW PG 42 R-48P R-48P/SW PG 48 Metal lanking Plugs iameter Thread Length R PG 07 R PG 09 R PG 11 R PG 13.5 R PG 16 R PG 21 R PG 29 R PG 36 R PG 42 able Glands & dapters R PG 48 lind Plugs L H PG07-P PG H PG09-P PG L L PG11-P PG PG13.5-P PG Ø1 Ø3 Ø2 PG16-P PG PG21-P PG PG29-P PG Polyamide -12 Mencom orporation
13 able Glands ccessories PG Threads able Gland dapters dapters PG Threads PG to NPT dapter External Internal E F PG11-3/8 PG 11 3/8 NPT PG11-1/2 PG 11 1/2 NPT PG13.5-1/2 PG /2 NPT (Internal thread) PG16-1/2 PG 16 1/2 NPT F E PG21-3/4 PG 21 3/4 NPT PG29-1 PG NPT PG PG NPT PG PG NPT PG to Metric dapter Part Number External Internal E F PG07-M12 PG 07 M12 x PG09-M16 PG 09 M16 x PG11-M16 PG 11 M16 x PG13.5-M20 PG 13.5 M20 x (Internal thread) E PG16-M20 PG 16 M20 x PG16-M25 PG 16 M25 x PG21-M25 PG 21 M25 x PG21-M32 PG 21 M32 x PG29-M40 PG 29 M40 x PG36-M50 PG 36 M50 x F able Glands & dapters PG42-M63 PG 42 M63 x Mencom orporation
14 Reducers Enlargers PG Threads able Glands ccessories PG Threads able Gland Reducers & Enlargers PG Reducers E E-07 PG 09 PG E-07X PG 11 PG E-07Y PG 13.5 PG E-07Z PG 16 PG E-09 PG 11 PG (Internal thread) E E-09X PG 13.5 PG E-09Y PG 16 PG E-11 PG 13.5 PG E-11X PG 16 PG E-13.5 PG 16 PG E-13.5X PG 21 PG E-16 PG 21 PG E-16X PG 29 PG E-21 PG 29 PG E-29 PG 36 PG PG Enlargers able Glands & dapters E F R-09 PG 09 PG R-09X PG 09 PG R-11 PG 11 PG R-11X PG 11 PG R-13.5 PG 13.5 PG R-16 PG 16 PG R-16X PG 16 PG R-21 PG 21 PG R-29 PG 29 PG F E (Internal thread) R-36 PG 36 PG Mencom orporation
15 able Glands Metric Threads able Glands L Rating IP Rating iameter Range Mounting Hole learance Thread Length Wrench Flats Thread Type MG-M06*** N/ IP M6 x 1.0 MG-M08*** N/ IP M8 x 1.25 MG-M12 L Recognized IP69K M12 x 1.5 MG-M16 L Recognized IP69K M16 x 1.5 MG-M20 L Recognized IP69K M20 x 1.5 MG-M25 L Recognized IP69K M25 x 1.5 MG-M32 L Recognized IP M32 x 1.5 MG-M40 L Recognized IP M40 x 1.5 MG-M50 L Recognized IP69K M50 x 1.5 MG-M63 L Recognized IP69K M63 x 1.5 *** MG-M06 & MG-M08 are not supplied with jam nuts. Nuts are not available for these cable glands. Mencom able Glands are easy to use and provide a good strain relief and water tight seal for round cables. The cable glands are rated up to IP 68 (comparable to NEM 6P). The glands have a wide clamping range. Insert: Polyamide able Glands & dapters Mencom orporation
16 able Glands Metric Threads able Glands Gray lack L Rating iameter Range Mounting Hole learance Thread Length Wrench Flats Thread Type PG-M12R PG-M12R- N/ M12 x 1.5 PG-M12 PG-M12- L Recognized M12 x 1.5 PG-M16R PG-M16R- N/ M16 x 1.5 PG-M16 PG-M16- L Recognized M16 x 1.5 PG-M20R PG-M20R- L Recognized M20 x 1.5 PG-M20 PG-M20- L Listed M20 x 1.5 PG-M25R PG-M25R- N/ M25 x 1.5 PG-M25 PG-M25- L Recognized M25 x 1.5 PG-M32R PG-M32R- L Listed M32 x 1.5 PG-M32 PG-M32- L Listed M32 x 1.5 PG-M40R PG-M40R- L Listed M40 x 1.5 PG-M40 PG-M40- L Listed M40 x 1.5 PG-M50R PG-M50R- L Listed M50 x 1.5 PG-M50 PG-M50- L Listed M50 x 1.5 PG-M63R PG-M63R- L Listed M63 x 1.5 able Glands & dapters PG-M63 PG-M63- L Listed M63 x 1.5 Mencom able Glands are easy to use and provide a good strain relief and water tight seal for round wide clamping range. -16 Mencom orporation
17 able Glands Metric Threads able Glands ual Grommet Plastic able Glands Metric Threads IP68 Rating Gray lack L Rating iameter Range Mounting Hole learance Thread Length Wrench Flats Thread Type PG-M12 PG-M12- L Recognized M12 X 1.5 PG-M16 PG-M16- L Recognized M16 X 1.5 PG-M20 PG-M20- L Recognized M20 X 1.5 PG-M25 PG-M25- L Recognized M25 X 1.5 PG-M32 PG-M32- L Recognized M32 X 1.5 PG-M40 PG-M40- L Recognized M40 X 1.5 PG-M50 PG-M50- L Recognized M50 X 1.5 PG-M63 PG-M63- N/ M63 X 1.5 These able Glands have a dual grommet system that allows for a much wider range in diameter than cable gland without any change. For cables that are in the upper part of the diameter range, the dome able Glands & dapters Mencom orporation
18 able Glands Metric Threads able Glands Part Number L Rating IP Rating iameter Range Mounting Hole learance Thread Length Wrench Flats Thread Type MG-M12 L Recognized IP69K M12 x 1.5 MG-M12L L Recognized IP69K M12 x 1.5 MG-M16 L Recognized IP69K M16 x 1.5 MG-M16L L Recognized IP69K M16 x 1.5 MG-M20 L Recognized IP69K M20 x 1.5 MG-M20L L Recognized IP69K M20 x 1.5 MG-M25 L Recognized IP69K M25 x 1.5 MG-M25L L Recognized IP69K M25 x 1.5 MG-M32 L Recognized IP M32 x 1.5 MG-M32L L Recognized IP M32 x 1.5 MG-M40 L Recognized IP M40 x 1.5 MG-M40L L Recognized IP M40 x 1.5 MG-M50 L Recognized IP69K M50 x 1.5 MG-M50L L Recognized IP69K M50 x 1.5 MG-M63 L Recognized IP69K M63 x 1.5 able Glands & dapters Mencom EMI able Glands provide an easy way to ground the shield from a shielded cable to the body of the metal cable gland. The seal rating is IP 68. Insert: Polyamids O-Ring: Neoprene -18 Mencom orporation
19 able Glands Metric Threads able Glands iameter Range Mounting Hole learance Thread Length Wrench Flats MGEX-M M12 x 1.5 MGEX-M M16 x 1.5 MGEX-M M20 x 1.5 MGEX-M M25 x 1.5 MGEX-M M32 x 1.5 MGEX-M M40 x 1.5 MGEX-M M50 x 1.5 MGEX-M M63 x 1.5 areas according to EN and EN The type of protection is EExd e II-increased safety. There is excellent strain relief, a wide clamping range, and a torsion protected plastic insert that is resistant to impact at cold temperatures. lso, the cable glands feature a neoprene sealing insert, the O-Ring seal is must be ordered separately. TEX 100a 1st of March, 1996 and from the 1st of July, 2003 onwards, it will replace and supplement all directives on explosion protection applicable protection systems. be inserted into electrical equipment while retaining the corresponding type of protection. The explosion-proof KLE items contained in this catalog are suitable for inserting cables and wires into housing of protection type EEx e able Glands & dapters Mencom orporation
20 able Glands Metric Threads able Glands Explosion-Proof Plastic able Glands Metric Threads IP66 Rating olor iameter Range Mounting Hole learance Thread Length Wrench Flats PGEX-M12- lack M12 x 1.5 PGEX-M12L- lack M12 x 1.5 PGEX-M16- lack M16 x 1.5 PGEX-M16L- lack M16 x 1.5 PGEX-M20- lack M20 x 1.5 PGEX-M20L- lack M20 x 1.5 PGEX-M25- lack M25 x 1.5 PGEX-M25L- lack M25 x 1.5 PGEX-M32- lack M32 x 1.5 PGEX-M40- lack M40 x 1.5 PGEX-M50- lack M50 x 1.5 PGEX-M63- lack M63 x 1.5 Intrinsically safe explosion proof versions are also available, please consult the factory. able Glands & dapters LRYM -20 Mencom orporation
21 able Glands ccessories Metric Threads able Gland Nuts Nuts Plastic Metal PG Threads Plastic Nuts Gray lack 2M12P 2M12P/SW 17 5 M12 x 1.5 2M16P 2M16P/SW 22 5 M16 x 1.5 2M20P 2M20P/SW 27 6 M20 x 1.5 2M25P 2M25P/SW 32 6 M25 x 1.5 2M32P 2M32P/SW 41 7 M32 x 1.5 2M40P 2M40P/SW 50 7 M40 x 1.5 2M50P 2M50P/SW 60 8 M50 x 1.5 2M63P 2M63P/SW 75 8 M63 x 1.5 Polyamide Metal Nuts Nickel Plated rass Stainless Steel 2M12M 2M12M-SS M12 x 1.5 2M16M 2M16M-SS M16 x 1.5 2M20M 2M20M-SS 24 3 M20 x 1.5 2M25M 2M25M-SS M25 x 1.5 2M32M 2M32M-SS 36 4 M32 x 1.5 2M40M 2M40M-SS 46 5 M40 x 1.5 2M50M 2M50MPOT-SS 60 5 M50 x 1.5 2M63M 2M63MPOT-SS 70 6 M63 x 1.5 utting Metal Nuts 2M12MPOT M12 x 1.5 2M16MPOT M16 x 1.5 2M20MPOT 24 3 M20 x 1.5 2M25MPOT M25 x 1.5 2M32MPOT 36 4 M32 x 1.5 able Glands & dapters 2M40MPOT 46 5 M40 x 1.5 2M50MPOT 60 5 M50 x 1.5 2M63MPOT 70 6 M63 x 1.5 1mm Mencom orporation
22 able Glands ccessories Metric Threads able Gland Plugs Gray lack iameter Plastic lanking Plugs Thread Length R-M12P R-M12P/SW 15 6 M12 x 1.5 R-M16P R-M16P/SW 20 6 M16 x 1.5 R-M20P R-M20P/SW 24 6 M20 x 1.5 R-M25P R-M25P/SW 30 8 M25 x 1.5 R-M32P R-M32P/SW 37 8 M32 x 1.5 R-M40P R-M40P/SW 46 8 M40 x 1.5 R-M50P R-M50P/SW M50 x 1.5 R-M63P R-M63P/SW M63 x 1.5 Metal lanking Plugs L Rating iameter Thread Length R-M M12 x 1.5 R-M M16 x 1.5 R-M20 L listed M20 x 1.5 R-M25 L listed 28 7 M25 x 1.5 R-M32 L listed 35 8 M32 x 1.5 able Glands & dapters R-M40 L listed 45 8 M40 x 1.5 R-M50 L listed 55 9 M50 x 1.5 R-M63 L listed M63 x 1.5 Plastic: Polyamide -22 Mencom orporation
23 able Glands ccessories Metric Threads able dapters dapters Metric Threads Metric to PG E F M12-PG9 M12 x 1.5 PG M16-PG11 M16 x 1.5 PG M20-PG16 M20 x 1.5 PG (Internal thread) M25-PG21 M25 x 1.5 PG F E M32-PG29 M32 x 1.5 PG M40-PG36 M40 x 1.5 PG M50-PG42 M50 x 1.5 PG M50-PG48 M50 x 1.5 PG Metric to NPT (Metal) M16-1/2 M16 x 1.5 1/2 NPT M20-1/2 M20 x 1.5 1/2 NPT (Internal thread) M25-3/4 M25 x 1.5 3/4 NPT F E M32-3/4 M32 x 1.5 3/4 NPT M32-1 M32 x NPT M M40 x NPT Metric to NPT (lack Plastic) M16-1/2P/SW M16 x 1.5 1/2 NPT (Internal thread) E able Glands & dapters M20-1/2P/SW M20 x 1.5 1/2 NPT F M25-12-PSW M29 x 1.5 1/2 NPT M32-34-PSW M32 x 1.5 3/4 NPT Mencom orporation
24 Reducers & Enlargers Metric Threads able Glands ccessories Metric Threads able Gland Reducers & Enlargers Metric Enlargers E F R-M12 M12 x 1.5 M16 x R-M16 M16 x 1.5 M20 x (Internal thread) E R-M20 M20 x 1.5 M25 x R-M25 M25 x 1.5 M32 x F R-M32 M32 x 1.5 M40 x R-M40 M40 x 1.5 M50 x R-M50 M50 x 1.5 M63 x Metric to PG E E-M12 M16 x 1.5 M12 x E-M12X M20 x 1.5 M12 x E-M16 M20 x 1.5 M16 x E-M16X M25 x 1.5 M16 x E-M20 M25 x 1.5 M20 x E-M20X M32 x 1.5 M20 x (Internal thread) E E-M25 M32 x 1.5 M25 x able Glands & dapters E-M20Y M40 x 1.5 M20 x E-M25X M40 x 1.5 M25 x E-M32 M40 x 1.5 M32 x E-M25Y M50 x 1.5 M25 x E-M32X M50 x 1.5 M32 x E-M40 M50 x 1.5 M40 x E-M32Y M63 x 1.5 M32 x E-M40X M63 x 1.5 M40 x E-M50 M63 x 1.5 M50 x Mencom orporation
25 able Glands ccessories Metric, PG & NPT Threads Flat & Festoon able Glands able Glands for Flat able pplications Mencom Plastic Version Gray lack Wrench Flats Thread Length S1 IM MIN S1 IM MIN S IM MIN S IM MIN Thread Type Mounting Hole learance PFG-M20-12X5 PFG-M20-12X M20 X PFG-M X6 PFG-M X M25 X PFG-M32-20X9 PFG-M32-20X M32 X PFG-M40-27X10 PFG-M40-27X M40 X PFG-M50-34X13 PFG-M50-34X M50 X PFG-M63-45X15 PFG-M63-45X M63 X PFG-1/2-12X5 PFG-1/2-12X /2-14 NPT 21.2 PFG X5 PFG X PG rass Version Wrench Flats Thread Length S1 IM MIN S1 IM MIN S IM MIN S IM MIN Thread Type Mounting Hole learance MFG-M20-12X M20 X MFG-M X M25 X MFG-M32-20X M32 X MFG-M40-27X M40 X MFG-M50-34X M50 X MFG-M63-45X M63 X MFG-1/2-12X /2-14 NPT 21.2 MFG X PG Longer thread lengths are available for some of these cable glands, please consult the factory. able Glands & dapters S S1 Plastic Version rass Version Insert: Polyamide Grommet : TPE Mencom orporation
26 able Glands NPT, PG & Metric Threads SI able Glands Plastic SI able Glands Gray lack Figure Number Mounting Hole learance Thread Length Wrench Flats PG-1/2-SI PG-1/2--SI Figure /2 NPT PG-1/2-2SI PG-1/2--2SI Figure /2 NPT PG-13.5-SI PG SI Figure PG 13.5 PG SI PG SI Figure PG 13.5 PG-M20-SI PG-M20--SI Figure mm 8 mm 27 mm M20x1.5 PG-M20-2SI PG-M20--2SI Figure mm 8 mm 27 mm M20x1.5 PG-M25-SI PG-M25--SI Figure mm 8 mm 33 mm M25x1.5 PG-M25-2SI PG-M25--2SI Figure mm 8 mm 33 mm M25x1.5 Metal SI able Glands Figure Number Mounting Hole learance Thread Length Wrench Flats MG-1/2-SI Figure /2 NPT MG-13.5-SI Figure PG 13.5 MG-M20-SI Figure mm 6 mm 22 mm M20x1.5 MG-M25-SI Figure mm 7 mm 27 mm M25x1.5 MG-M25-2SI Figure mm 7 mm 27 mm M25x1.5 able Glands & dapters Figure 1: Single Figure 2: ouble Plastic Material: Metal Material: Insert: Polyamide -26 Mencom orporation
27 able Glands Sealing Glands lick Seal Metric Part Number olor Size IP 67 iameter Range IP 65 iameter Range Mounting Hole learance Panel Thickness Range L1 L2 L3 SW SGL-M20-TGY Gray M SGL-M25-TGY Gray M The IP67 cable range has been tested to the same EN pull force requirements as Mencom s standard PG cable glands. : Protection: IP67 and IP65 able glands are approx mm. Handles large range of cable and pipe diameters. Integrated tension relief Installation time saving up to 90%. Ergonomic installation Fixed in both directions when mounted. Space saving design compression during installation. able Glands & dapters Rubber coated tension relief for protection of the cable mantle. Mencom orporation
28 Gray EPM lack hloroprene Size iameter Range PG Holes Mounting Hole learance Panel Thickness Range a H SG-PG07-EGY SG-PG07-K PG SG-PG09-EGY SG-PG09-K PG SG-PG11-EGY SG-PG11-K PG SG-PG16-EGY SG-PG16-K PG SG-PG21-EGY SG-PG21-K PG SG-PG29-EGY SG-PG29-K PG SG-PG36-EGY SG-PG36-K PG Metric Holes SG-M12-EGY SG-M12-K M SG-M16-EGY SG-M16-K M SG-M20-EGY SG-M20-K M SG-M25-EGY SG-M25-K M SG-M32-EGY SG-M32-K M SG-M40-EGY SG-M40-K M SG-M50-EGY SG-M50-K M : Protection: IP67 Protection: IP67 able Glands Sealing Glands H1 able Glands & dapters olor Size iameter Range TSS Metric Mounting Hole learance Panel Thickness Range H H1 H2 SG-M16-TGY Gray M SG-M20-TGY Gray M SG-M25-TGY Gray M SG-M32-TGY Gray M : Protection: IP Mencom orporation
29 able Glands ccessories Multi-Hole able Gland Inserts Multi-Hole able Gland Inserts IP65 Rating # of Holes iameter of Holes Fits Into PG09-0x0 0 None PG09-2x3 2 3 (0.118) PG09-2x (0.138) PG09-3x2 3 2 (0.079) PG09-3x (0.138) MG-09 MG-09R MG-3/8 MG-3/8R PG-09 PG-09- PG-09R PG-09R- PG09-4x2 4 2 (0.079) PG09-4x3 4 3 (0.118) PG11-0x0 0 None PG11-2x3 2 3 (0.118) PG11-2x4 2 4 (0.157) PG11-2x (0.177) PG11-2x5 2 5 (0.197) PG11-3x3 3 3 (0.118) PG11-3x4 3 4 (0.157) PG11-3x5 3 5 (0.197) MG-11 MG-11R PG-11 PG-11- PG-11R PG-11R- PG-3/8 PG-3/8- PG-3/8R PG-3/8R- PG-M16 PG-M16- PG-M16R PG-M16R- PG11-4x3 4 3 (0.118) PG11-7x (0.107) PG13.5-0x0 0 None PG13.5-2x (0.177) PG13.5-2x5 2 5 (0.197) PG13.5-2x6 2 6 (0.236) PG13.5-3x4 3 4 (0.157) PG13.5-3x5 3 5 (0.197) MG-13.5 MG-13.5R MG-1/2 MG-1/2R PG-13.5 PG PG-13.5R PG-13.5R- PG-1/2X PG-1/2X- P-1/2Y PG-1/2Y- PG-M20R PG-M20R- PG16-0x0 0 None PG16-2x4 2 4 (0.157) PG16-2x6 2 6 (0.236) PG16-3x4 3 4 (0.157) PG16-3x (0.177) PG16-3x5 3 5 (0.197) PG16-3x6 3 6 (0.236) PG16-3x (0.256) PG16-3x7 3 7 (0.276) PG16-4x4 4 4 (0.157) PG16-4x5 4 5 (0.197) PG16-4x6 4 6 (0.236) MG-16 MG-16R PG-16 PG-16- PG-16R PG-16R- PG-1/2 PG-1/2- PG-1/2R PG-1/2R- PG-M20 PG-M20 able Glands & dapters PG16-5x4 5 4 (0.157) Inserts without holes allow the user to drill holes for low volume, custom applications. Mencom Multi-Hole able Gland Inserts will allow the user to use one cable gland for multiple wires, cables, or tubes. Mencom orporation
30 able Glands ccessories Multi-Hole able Gland Inserts Multi-Hole able Gland Inserts IP65 Rating # of Holes iameter of Holes Fits Into PG21-0x0 0 None PG21-2x7 2 7 (0.276) PG21-2x8 2 8 (0.315) PG21-2x9 2 9 (0.354) PG21-3x7 3 7 (0.276) PG21-3x8 3 8 (0.315) PG21-4x5 4 5 (0.197) PG21-4x (0.256) PG21-4x7 4 7 (0.276) MG-21 MG-21R PG-21- PG-21R PG-21R- PG-3/4 PG-3/4- PG-3/4-R PG-3/4R- PG-M25 PG-M25- PG-M25R PG-M25R- PG21-4x (0.295) PG21-5x5 5 5 (0.197) PG29-0x0 0 None PG29-5x (0.335) PG29-6x5 6 5 (0.197) PG29-6x (0.295) PG29-8x5 8 5 (0.197) MG-29 MG-29R PG-29 PG-29- PG-29R PG-29R- PG-1.0 PG-1.0- PG-1.0R PG-1.0R- PG-M32 PG-M32- M25-0x0 0 None M25-2x8 2 8 (0.315) M25-3x4 3 4 (0.157) M25-3x7 3 7 (0.276) MG-3/4 MG-3/4R MG-M25 M25-4x5 4 5 (0.197) able Glands & dapters M25-4x (0.256) Inserts can be pre-installed in cable glands for orders of 100 or more. Order as follows: Multi-Hole Insert esired able Gland Resulting Mencom Multi-Hole able Gland Inserts will allow the user to use one cable gland for multiple wires, cables, or tubes. -30 Mencom orporation
31 able Glands ccessories O-Rings O-Rings Metric, PG and NPT Threads IP68 Rating For Metric Threads: O-Rings (100 Pieces/Package) Size 3M12G M G M G M M25G M M32G M M40G M M50G M M63G M For PG Threads: O-Rings (100 Pieces/Package) 307G PG G PG G PG G PG G PG G PG G PG G PG G PG G PG For NPT Threads: O-Rings (100 Pieces/Package) 309G 3/8 NPT G 1/2 NPT G 3/4 NPT able Glands & dapters Material: Mencom orporation
32 able Entry System KP able Entry System able iameter Range Part Number # of Entries 1.5 ~ 2.6 mm 2.5 ~ 5.0 mm 3.0 ~ 5.5 mm 3.0 ~ 6.5 mm 4.1 ~ 8.1 mm 5.0 ~ 9.2 mm 8.0 ~ 12.0 mm 8.0 ~ 12.5 mm 9.0 ~ 14.0 mm 9.6 ~ 15.9 mm 14.0 ~ 20.0 mm KP KP KP KP KP KP KP KP KP KP-24-LI 0 pplication For introduction of cables, hoses, pneumatic and hydraulic lines able Glands & dapters Fast and simple installation p to 10 times faster than with cable glands Mounting mm the cable entry plate KP can be attached with screws. Elastomeric Plate: EPM 32 Ø mm Hole imensions 59.5mm 8.2mm 25mm Mencom orporation
33 able Entry System KL able Entry System KL able Entry Part Number # of Entries Hole Size mm imension L L1 H H1 KL-5K x KL-10K x KL-15K x KL-20K x KL-25K x KL Expansion Insert KL-EXP N/ N/ Grommets ordered separately. pplication Insertion and sealing of pre-assembled cables with connectors into housings - Grommet clamping range to 2 mm L L1 H1 H Mounting than 2.0 mm Part Number Ø mm H mm KL Grommets a mm TK TK KL able Entry System Expansion Insert able Glands & dapters TK TK TK TK TK TKG N/ Mencom orporation
Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationCable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.
ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands
More informationIndustrial cable glands
Industrial cable glands SK-EMC cable glands Cable glands of the SK-series fulfil the highest demands of quality and security. Outstanding high-grade materials are used together with innovative technology
More informationCABLE GLANDS. Connector~Tech Providing Harsh Environment Connector SOLUTIONS
Connector~Tech www.connectortech.com.au Providing arsh Environment Connector SOLUTIONS CABLE ANDS Connector~Tech is a Division of: Colourview Electronics (QLD) Pty Ltd (ABN 99 065 191 424) Unit 2, 8 Colebard
More informationE10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
More informationVentilation Plugs (Pressure Balance Elements)
Ventilation Plugs (Pressure Balance Elements) In order to choose the right ventilation plug unit (pressure balance elements) for a specific application, the working principles of the unit must be known
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System
Liquid Tight Strain Relief Fittings, ccessories & Our Service makes the difference! 20 years of excellence! Table of Contents Nylon Strain Relief Fittings Page escription 3 Nylon Fittings - Introduction
More informationSKINTOP. Cable glands
able glands 486 493 Non-Metallic able Glands 503 able Bushing Systems 507 Metallic able Glands 516 EM able Glands 521 SKINIHT able Glands & lamps 531 Accessories & Tools 533 Locknuts & Fittings 537 Bushings
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationIP 69 Protection against water under pressure
44 he European echnical Standard DIN EN 50 262 Metric cable glands for electric installations - the end of the PG Cable glands threads. he technical standards Cable Glands for cables and conductors with
More informationManual retractable fitting with safe-to-operate rotary drive
Manual Retractable Fittings SensoGate W M Manual retractable fitting with safe-to-operate rotary drive Revolutionary operation The SensoGate W M has a manual rotary drive, which enables the fitting to
More informationPneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
More informationSEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System. Our Servicei makes the difference! ULf1 746C. Committed To Excellence!
Liquid Tight Strain Relief Fittings, ccessories & Our Servicei makes the difference! ULf1 746C Committed To Excellence! e! Table of Contents Nylon Strain Relief Fittings Page escription Strain Relief ccessories
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationHSK-EMV-Industry Standard
Setting Standards SK-EMV-Industry Standard Strain relief fittings in all popular thread types and sizes for a reliable low-ohm shield used in the following areas: Machine, apparatus and plant equipment.
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationMagnetic level switch type MR783 Instruction Manual
Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationOperating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationPTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
More informationFTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
More informationJunction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationPressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationExpansion Thermometers Stainless Steel Series, Model 70
Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationInstallation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationCertificate of Conformity
Certificate of Conformity Certificate Holder: CCG Cable Terminations (PTY) LTD 33 37 Forge Road Spartan Industrial Area, Kempton Park 1619 SOUTH AFRICA Electrical Apparatus: A2F, A2FX, and A2FCG Cable
More informationF Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
More informationFebruary Cable glands For general industry and hazardous areas
February 2017 Cable glands For general industry and hazardous areas Introduction When safety matters, there is only one choice The Nicote and Kopex range of cable glands come to ABB through the acquisition
More informationPTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
More informationVTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationVCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
More informationOperating Procedures for GripTight 15.5 SDR & IPS Test Plugs
EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing
More informationSchroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationOperating Instructions
Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2
More informationData sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationValvex Valves for Mining Applications
Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationBourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
More informationFlow Measurement. SITRANS F US Inline. Flowmeter SITRANS FUS880 (retrofit kit) 4/275. Overview
Siemens G 2010 Overview pplication Irrigation systems Irrigation distribution systems Pumping stations Canal laterals On-farm outlets Water well production rip and sprinkler irrigation Center pivot systems
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
More informationPressure Switches Application Guideline
Pressure Switches Application Guideline Product Overview The Fema Pressure Switch product portfolio provides devices suitable for many applications. The portfolio contains Special functions and equipment
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationOperation Manual Piston Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationOperation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationPressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationPush-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
More informationPneumatic retractable fitting for use with Unical 9000 and Uniclean 900 automated control systems
Pneumatic Retractable Fittings SensoGate WA 3 Pneumatic retractable fitting for use with Unical 9 and Uniclean 9 automated control systems Easy installation SensoGate WA 3 offers genuine plug & play. The
More informationHigh Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
More information3.0 Pressure Transmitter Selection
3.0 Pressure Transmitter Selection Each Tronic Line pressure transmitter has different features to meet specific performance, environmental, and price requirements. It is not possible to describe every
More informationStirred Reactors and Pressure Vessels
P a r r I n s t r u m e n t C o m p a n y Stirred Reactors and Pressure Vessels Designing and Building Quality Pressure Apparatus for Over 100 Years Bulletin 4500 Volume 12 Start Chapter Six This pdf is
More informationIndustrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationParts List. Description. Additional Considerations. Installation Instructions. Dual/Elite Hydraulic Treadmill Kit (supplied by EPI)
Page 1 of 9 Parts List Dual/Elite Hydraulic Treadmill Kit (supplied by EPI) Qty Description Treadmill Body 1 Treadmill Power Unit (per Treadmill Body) 2 Treadmill Decks (per Treadmill Body) 1 Treadmill
More informationSanitary pneumatic retractable fitting for use with Unical 9000 and Uniclean 900 automated control systems
Pneumatic Retractable Fittings SensoGate W 3 H Sanitary pneumatic retractable fitting for use with Unical 9 and Uniclean 9 automated control systems Easy installation offers genuine plug & play. The central
More informationInfrared Linescanners
Thermal Imaging and Temperature Profiles for Continuous Process Monitoring and Quality Control HD Infrared Linescanners PROCESS & ANALYTICAL INSTRUMENTS Mountings and Accessories LSPHD Mountings and Accessories
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationHELAVIA grommets and mouldings in polychloroprene rubber
A20 HELAVIA grommets and mouldings in polychloroprene rubber HELAVIA grommets and mouldings in POLYCHLOROPRENE rubber (Neoprene) SES-STERLING has modern sophisticated conversion equipment backed by our
More informationPressure Transmitters 36 F-27839
Pressure Transmitters 36 F-27839 SPD310/SPD360 Air Differential schneider-electric.com 37 SPD310/SPD360 SPD310/SPD360 differential pressure transmitters are intended for use in air handling systems for
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationBollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
More informationC 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
More informationPressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
More information44 CE RANGE WATERTIGHT SURFACE-MOUNTING JUNCTION BOXES
WALL BOXES IN GWPLAST 75 - GWT 650 C GWT 650 C TP 85 C WALLS WITH CABLE GLAND - IP44 AND IP55 GW44001 JUNCTION BOXES WITH PLAIN PRESS-ON LID - IP44 - GREY RAL 7035 LxHxD (mm) No. holes / Ø GW 44 001 Ø
More informationenclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) Stainless steel and plastic enclosures for use in potentially explosive environments R Rittal system partners Perfect
More informationCO2 Tank Conversion Kit P.N , P.N , and P.N
Foodservice Group Multiplex Beverage Equipment Installation Instructions for CO2 Tank Conversion Kit P.N. 002247, P.N. 0022505, and P.N. 0025099 Introduction The following instructions cover the installation
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationCyclops + Cyclops + Written By: John Bamford e3d-online.dozuki.com/ Page 1 of 18
Cyclops + Written By: John Bamford 2018 e3d-online.dozuki.com/ Page 1 of 18 TOOLS: Philips Screwdriver (1) Hex Wrench, 1.5mm (1) PARTS: Plastic Screws (2) Collet (2) Collet Clip (2) 30mm Fan (1) Cyclops
More informationCentriFlow Meter Integrated Air Entrainment System
CentriFlow Meter Integrated Air Entrainment System INSTALLATION & OPERATION MANUAL January 2004 Revision 021-4 EASTERN INSTRUMENTS 416 LANDMARK DR. WILMINGTON, NC 28412 910-392-2490 Fax: 910-392-2123 website:
More information