HELAVIA grommets and mouldings in polychloroprene rubber
|
|
- Dorcas Maxwell
- 5 years ago
- Views:
Transcription
1 A20 HELAVIA grommets and mouldings in polychloroprene rubber
2 HELAVIA grommets and mouldings in POLYCHLOROPRENE rubber (Neoprene) SES-STERLING has modern sophisticated conversion equipment backed by our research laboratory keeping us at the forefront of technology. Design and manufacture of the moulds plus full maintenance facilities give us control of production at all stages. A large proportion of our manufacturing capacity is devoted to the moulding of Neoprene elastomer, which has properties of particular relevance to the electrical industry. The main properties are: very good resistance to ageing good ozone resistance good electrical insulation exceptional flexibility fair resistance to oils available in varying degrees of flexibility from 40 to 70 Shore hardness A SES-STERLING has many years experience in moulding Polychloroprene. SES-STERLING is synonymous with guarantee of quality. SES-STERLING sells polychloroprene grommets branded. SES-STERLING can supply you with following standard moulded parts from stock: Grommets in different forms Membrane grommets Reinforced grommets Wire-clamp grommets Wire protector grommets Caps Feet Flanged and bushed grommets in specific shapes Special grommets With our know-how, we can adapt any specific demand on the material (silicone, EPDM,...) and colors (white, gray,...). A20/0-01 X/10 A20/0-01
3 Universal grommets DU in EPDM rubber H F DU Material: EPDM Colour: black Operating temperatures: -40 to +100 C Ultimate elongation: > 400 % Dielectric strength: > 13 kv/mm Resistance to ozone: very good Specification: halogene free type article number ± A ± B ± C D F1 F2 pces DU-M , , DU-M ,2 10,5 100 Specification: only one grommet adapting to a wall thickness of 1 to 4 mm. 1 mm 2 mm 4 mm Mounting principle A20/1-00 IV/12 i A20/1-00
4 standard grommets DA (Neoprene) DA Material: polychloroprene rubber Colour: black Operating temperatures: -30 to +90 C Tensile strength at break: > 7 MPa Ultimate elongation: > 400 % Dielectric strength: > 13 kv/mm type article number ± A ± B ± C D F1 F2 pces DA 20/65/ , DA 20/65/ ,5 11 1, DA 20/65/ , DA 20/80/ DA 20/80/ , DA 20/80/ DA 30/50/ , DA 30/70/ , DA 30/70/ ,5 1, DA 30/70/ , DA 30/70/ , DA 30/70/ ,5 1, DA 40/65/ , DA 40/80/ DA 40/80/ , DA 40/80/ DA 45/95/ ,5 9, ,5 4,5 100 DA 45/95/ ,5 9,5 13 1,5 4,5 4,5 100 DA 45/95/ ,5 9, ,5 4,5 100 DA 48/80/ , ,5 1,5 100 DA 48/80/ , ,5 1,5 1,5 100 DA 48/80/ , ,5 1,5 100 DA 48/80/ , ,5 1,5 100 DA 48/85/ ,8 8, ,5 1,5 100 DA 50/70/ ,8 2,8 100 DA 50/70/ ,5 2,8 2,8 100 DA 50/70/ ,8 2,8 100 DA 50/70/ ,8 2,8 100 DA 50/90/ DA 50/90/ , DA 50/90/ DA 50/90/ DA 55/80/ , DA 55/80/ , , DA 55/80/ , DA 58/100/ , ,5 3,8 3,8 100 A20/1-01 IV/12 i A20/1-01
5 standard grommets DA (Neoprene) type article number ± A ± B ± C D F1 F2 pces DA 60/90/ DA 60/90/ , DA 60/90/ DA 60/90/ DA 60/90/ DA 60/100/ DA 60/100/ , DA 60/100/ DA 60/100/ DA 60/100/ DA 60/110/ ,8 1,8 100 DA 60/110/ ,5 1,8 1,8 100 DA 60/110/ ,8 1,8 100 DA 60/110/ ,8 1,8 100 DA 60/110/ DA 60/120/ ,8 1,8 100 DA 60/120/ ,5 1,8 1,8 100 DA 60/120/ ,8 1,8 100 DA 60/120/ ,8 1,8 100 DA 70/120/ ,3 3,3 100 DA 70/120/ ,5 3,3 3,3 100 DA 70/120/ ,3 3,3 100 DA 70/120/ ,3 3,3 100 DA 75/110/ , ,5 3,5 100 DA 75/120/ , ,5 3,5 100 DA 75/120/ , ,5 3,5 3,5 100 DA 75/120/ , ,5 3,5 100 DA 75/120/ , ,5 3,5 100 DA 75/120/ , ,5 3,5 100 DA 80/100/ ,5 3,5 100 DA 80/100/ ,5 3,5 3,5 100 DA 80/100/ ,5 3,5 100 DA 80/100/ ,5 3,5 100 DA 80/100/ ,5 3,5 100 DA 80/110/ ,5 3,5 100 DA 80/110/ ,5 3,5 3,5 100 DA 80/110/ ,5 3,5 100 DA 80/110/ ,5 3,5 100 DA 80/110/ ,5 3,5 100 DA 80/160/ DA 90/110/ ,8 2,8 100 DA 90/110/ ,5 2,8 2,8 100 DA 90/110/ ,8 2,8 100 DA 90/110/ ,8 2,8 100 DA 90/110/ ,8 2,8 100 DA 90/160/ DA 90/160/ , DA 90/160/ DA 90/160/ DA 90/160/ A20/1-02 I/15 i A20/1-02
6 standard grommets DA (Neoprene) type article number ± A ± B ± C D F1 F2 pces DA 90/200/ ,3 3,3 100 DA 90/200/ ,3 3,3 100 DA 90/200/ ,3 3,3 100 DA 95/130/ , , DA 95/130/ , ,5 1, DA 95/130/ , , DA 95/130/ , , DA 95/130/ , , DA 95/130/ , , DA 95/130/ , , DA 95/140/ , , DA 100/140/ DA 100/140/ , DA 100/140/ DA 100/140/ , DA 100/140/ DA 100/160/ , DA 110/140/ DA 110/140/ , DA 110/140/ DA 110/140/ DA 110/150/ DA 110/150/ , DA 110/150/ DA 110/150/ , DA 110/150/ DA 120/180/ ,5 2,5 100 DA 120/180/ ,5 2,5 2,5 100 DA 120/180/ ,5 2,5 100 DA 120/180/ ,5 2,5 100 DA 120/180/ ,5 2,5 100 DA 120/200/ ,5 2,5 100 DA 120/200/ ,5 2,5 2,5 100 DA 120/200/ ,5 2,5 100 DA 120/200/ ,5 2,5 100 DA 120/200/ ,5 2,5 100 DA 120/280/ DA 120/255/ , DA 130/170/ DA 130/170/ , DA 130/170/ DA 130/170/ DA 130/170/ DA 130/170/ DA 130/170/ DA 140/200/ DA 140/200/ , DA 140/200/ DA 140/200/ DA 140/200/ A20/1-03 X/10 i A20/1-03
7 standard grommets DA (Neoprene) type article number ± A ± B ± C D F1 F2 pces DA 150/220/ ,5 4,5 100 DA 150/220/ ,5 4,5 4,5 100 DA 150/220/ ,5 4,5 100 DA 150/220/ ,5 4,5 100 DA 150/220/ ,5 4,5 100 DA 160/220/ , DA 160/220/ ,5 1, DA 160/220/ , DA 160/220/ , DA 185/250/ , ,5 1 4,5 4,5 100 DA 185/250/ , ,5 1,5 4,5 4,5 100 DA 185/250/ , ,5 2 4,5 4,5 100 DA 185/250/ , ,5 2,5 4,5 4,5 100 DA 185/250/ , ,5 3 4,5 4,5 100 DA 185/250/ , ,5 4 4,5 4,5 100 DA 200/280/ DA 200/280/ , DA 200/280/ DA 200/280/ DA 200/280/ DA 200/280/ DA 230/300/ ,5 3,5 50 DA 230/300/ ,5 3,5 50 DA 230/300/ ,5 3,5 50 DA 230/300/ ,5 3,5 50 DA 250/470/ ,5 1,5 4,5 4,5 50 DA 300/350/ DA 300/350/ , DA 300/350/ DA 300/350/ DA 300/350/ DA 480/600/ ,8 3,8 25 DA 480/600/ ,5 3,8 3,8 25 DA 480/600/ ,8 3,8 25 DA 480/600/ ,8 3,8 25 DA 480/600/ ,8 3,8 25 A20/1-04 I/15 i A20/1-04
8 standard grommets DC-DE-DH HELAVIA standard grommets DC type article number Ø A Ø B Ø C D F DC 51/70/ , , DC 70/250/ DC 90/110/ ,3 100 DC 90/110/ ,5 3,3 100 DC 90/110/ ,3 100 DC 90/110/ ,3 100 DC 90/110/ ,3 100 DC 190/250/ , DC 190/250/ , DC 940/1010/ ,5 25 pces Grommets with unequal sides series DC type article number Ø A Ø B Ø C D F 1 F2 DC 50/70/ ,5 100 pces Conical grommets series DE type article number Ø A Ø B Ø C D F 1 F2 DE 65/100/ , / DE 65/100/ , /14 1, DE 65/100/ , / DE 65/100/ , / pces Elongated grommets series DH type article number Ø A Ø B Ø C D F DH 60/90/ DH 80/115/ , DH 80/115/ , DH 80/115/ , DH 120/200/ , DH 130/200/ DH 140/200/ DH 240/300/ DH 250/310/ DH 300/390/ DH 350/450/ pces A20/2-01 IV/12 A20/2-01
9 membrane grommets DG DG HELAVIA Material: polychloroprene rubber Colours: black - grey (near RAL 7037) Operating temperatures: Tensile strength at break: -30 to +90 C 7 MPa Ultimate elongation: > 400 % Dielectric strength: > 13 kv/mm Applications: designed to close off unused entries in panels, enclosures and housings of all types. Wires and conduits can pass through the membrane if required. Standard membrane (1 and 1,5 mm) article number black grey type Ø A Ø B Ø C E F1 F2 M pces DG 9/E , ,5 2, DG , ,5 2, DG , ,5 2, DG 13, ,5 20, ,5 2, DG ,5 27,5 2 2,5 2, DG DG ,5 3, DG ,5 3,8 3, DG ,5 3,8 3, DG ,5 3,8 3,8 1,5 50 DG ,5 3,8 3,8 1,5 50 DG M ,5 2, DG M , ,5 2, DG M , ,5 2 2,5 2, DG M DG M ,5 3,8 3, DG M ,5 3,8 3, DG M ,5 3,8 3, DG M ,5 3,8 3,8 1,5 50 DG M ,5 3,8 3, Thick membrane article number black type 010 Ø A Ø B Ø C E F1 F2 M pces DG 16/E ,5 27,5 3 2,5 2, DG 16/E ,5 27,5 4 2,5 2, DG 21/E DG 29/E ,5 3, DG 36/E , A20/5-01 II/11 A20/5-01
10 * 0 # 9 membrane grommets DG Cross-cut membrane type art. no. Ø A Ø B Ø C E F M X pces DGC , , DGC 13, ,5 20, , DGC ,5 27,5 2 2, DGC DGC , DGC ,5 3, DGC ,5 3, DGC ,5 3,8 1, Perforated membrane (semi-standard) type art. no. Ø A Ø B Ø C E F1 F2 M Ø P pces DG 9/4, , ,5 2,5 1 4,5 100 DG 11/3, , ,5 2,5 1 3,5 100 DG 11/4, , ,5 2,5 1 4,5 100 DG 13,5/4, ,5 20, ,5 2,5 1 4,5 100 DG 13,5/ ,5 20, ,5 2, DG 16/ ,5 27,5 2 2,5 2, DG 16/ ,5 27,5 2 2,5 2, DG 16/ ,5 27,5 2 2,5 2, DG 16/15E ,5 27,5 3 2,5 2, DG 21/ DG 21/ DG 21/ DG 21/ DG 21/ DG 21/ DG 29/ ,5 3, DG 29/ ,5 3, DG 29/ ,5 3, DG 36/ ,5 3,8 3, DG 36/ ,5 3,8 3, DG 36/19E , ,2 50 DG 36/ ,5 3,8 3, DG 48/ ,5 3,8 3, DG 48/ ,5 3,8 3, DG 48/ ,5 3,8 3, DG 53/ ,5 3,8 3,8 1, DG 69/ ,5 3,8 3,8 1, DG 69/ ,5 3,8 3,8 1, DG 69/ ,5 3,8 3,8 1, On request other cut-outs are possible. A20/5-02 XII/10 A20/5-02
11 membrane grommets DG type art. no. Ø A Ø B Ø C E F M Ø P pces Cut series with perforated membrane DG 21/3F DG 48/30F ,5 3, Special perforated membrane DG 21/6x DG 36/16EXC ,5 3, (2 holes) (off-centered) DG 21/6x2 DG 36/16EXC sleeved grommets in polychloroprene rubber 15-2** Material: Colours: Temperature range: Tensile strength at break: polychloroprene rubber black -30 to +90 C 7 MPa Ultimate elongation: > 400 % Dielectric strength: Applications: > 13 kv/mm protection of cables in the passage of sheet steel, and protection against twisting. type art. no. ØA ØB pces , , , , ,5 13, A20/5-03 III/11 A20/5-03
12 universal flexible DV wire-clamps in polychloroprene rubber (Neoprene) DV Material: Colours: Temperature range: Tensile strength at break: polychloroprene rubber black -30 to +90 C > 8 MPa Ultimate elongation: > 600 % Dielectric strength: > 13 kv/mm Applications: for protection and strain relief, very effective when used with SES-QUICK cable ties, in the passages of boxes, of cupboards or crankcase, etc. DV wire-clamps in Bags, without ties article cable ties to be used type number housing Ø wire Ø Ø A B C pces type article number DV 4 / , /34 SL-C DV 7 / , /34 SL-C DV 12 / /46 SL-C DV 18 / /46 SL-C DV 25 / , /46 SL-C DV wire-clamps in Bags, with ties article type number housing Ø wire Ø Ø A B C pces delivered with ties DV 4 / , /34 SL-C DV 7 / , /34 SL-C DV 12 / /46 SL-C DV 18 / /46 SL-C DV 25 / , /46 SL-C Assembly instruction C12/1 A20/7-01 X/10 A20/7-01
13 grommets DX, in polychloroprene rubber DX Material: Colours: Temperature range: Tensile strength at break: polychloroprene rubber black -30 to +90 C 10 MPa Ultimate elongation: > 600 % Dielectric strength: Protection factor: IP 67 > 13 kv/mm Applications: for all exits of panels, enclosures and housings of all types, etc. Owing to the closed cover, it is possible to use it as a temporary seal for a later wiring.in order to introduce the cable, the cover can be perforated for example with the help of a screwdriver. type article number hole Ø Ø de câbles metal thickness Ø A Ø B C pces DX , DX , Assembly instruction A20/7-02 X/10 A20/7-02
14 DX grommets, sealing in EPDM rubber DX S H DX-M / DX-PG Material: EPDM Colours: black light grey (RAL 7035) Temperature of use: -40 to +110 C Specification: IP 67 according to EN Applications: grommets, sealing for all exits of panels, enclosures and housings of all types, etc. Metric grommets article number black grey metal type cable Ø hole Ø thickness Ø A B C pces DX-M ,5 0, ,8 5,6 50 DX-M , , DX-M , , ,4 50 DX-M , ,5 21,3 15,3 50 DX-M , ,5 24,6 18,6 25 DX-M , ,5 29,5 21,7 25 DX-M , ,5 34, PG grommets article number black grey metal type cable Ø hole Ø thickness Ø A B C pces DX-PG , ,6 5,4 50 DX-PG ,8 10,3 50 DX-PG ,8 12,7 50 DX-PG ,6 14,7 50 DX-PG ,6 17,6 25 DX-PG , DX-PG ,9 23,9 10 Assembly instruction A20/7-03 II/11 A20/7-03
15 semi-special grommets Technical properties page D100 type code type code type code SNCF* SNCF* SNCF* ** SNCF* SNCF* SNCF* * Nitrile rubber ** EPDM rubber A20/8-01 IV/11 A20/8-01
16 semi-special grommets ** in EPDM rubber ** A20/8-02 II/11 A20/8-02
17 semi-special grommets type Ø A mm B mm , * * * * * in Nitrile rubber A20/8-03 IV/11 A20/8-03
18 semi-special grommets * * * in Nitrile rubber A20/8-04 II/11 A20/8-04
19 bushes and strain relief Technical properties page D100 type article number type article number type article number ** * ** ** ** ** Clamps for * nitrile rubber **EPDM rubber A20/20-01 III/14 i A20/20-01
20 bushes and strain relief A20/20-02 X/10 i A20/20-02
21 bushes and strain relief A20/20-03 X/10 i A20/20-03
22 bushes and strain relief A20/20-04 X/10 i A20/20-04
23 bushes and strain relief A20/20-05 III/12 i A20/20-05
24 bushes and strain relief A20/20-06 VI/12 i A20/20-06
25 moulded caps Technical properties page D100 type article number type article number * type ** * Nitrile rubber ** EPDM rubber article number A20/30-01 X/10 A20/30-01
26 moulded caps A20/30-02 X/10 A20/30-02
27 moulded caps A20/30-03 X/10 A20/30-03
28 cable support and feet Technical properties page D100 article article article type number type number type number * ** * * Nitrile rubber ** EPDM rubber A20/40-01 IV/08 A20/40-01
29 cable support and feet A20/40-02 X/10 A20/40-02
30 flanged and bushed grommets -30 to +90 C article article article type number type number type number A20/50-01 XI/10 A20/50-01
31 moulded parts to samples in polychloroprene rubber (Neoprene) SES-STERLING specializes mainly in Polychloroprene (Neoprene / Baypren). For special needs, other qualities can be produced (e.g. EPDM, NBR or Silicone). SES-STERLING always seeks to extend its programme of mouldings for the electrical industry. Many new designs are added each year where we have the customer's cooperation and where a small contribution is made by the original customer towards the tool costs. All sales and manufacturing rights remain the property of the SES-STERLING. SES-STERLING executes all the orders it receives for new items, without research property rights filed. The manufacture and sale of new items are therefore the unique responsibility of the Company who places the order. A20/60-01 XII/10 A20/60-01
32 Grommets in polychloroprene rubber type 15- type article number page type article number page type article number page A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ SNCF A20/ A20/ A20/ A20/ A20/ SNCF A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/ A20/20-01 A20/90-01 II/14 i A20/90-01
33 Helsinki tel info@klinkmann.fi St. Petersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com
Mouldings in flexible PVC
A22 Mouldings in flexible PVC PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry.
More informationPLIO Mouldings in flexible PVC
PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry. Injection moulded parts in
More informationM8, M12, M18, M30 Cube 40 x 40 mm. 2 mm 15 mm 2 mm 15 mm 20 mm 40 mm
Bulletin 872C, 871TM, 871FM, 871C, 871P Product Line Overview Proximity Sensors (872C, 871TM, 871FM) 6 / 2011 Features Bulletin 872C 871TM 871P Size Sensing Range Standard Sensing Range Extended Sensing
More informationNEW. Mallia TM modular. These products are part of Power Line Carrier technology system > See p
Mallia TM modular power line carrier (PLC) and infrared (IR) technologies NEW 2818 01 + 2819 00 2818 32 + 2819 05 2818 03 + 2819 00 2818 05 + 2819 00 2818 36 + 2819 05 Technical information (p. 443) Particularly
More informationCable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
More informationE10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationCable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.
ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands
More informationIP 69 Protection against water under pressure
44 he European echnical Standard DIN EN 50 262 Metric cable glands for electric installations - the end of the PG Cable glands threads. he technical standards Cable Glands for cables and conductors with
More informationCABLE GLANDS. Connector~Tech Providing Harsh Environment Connector SOLUTIONS
Connector~Tech www.connectortech.com.au Providing arsh Environment Connector SOLUTIONS CABLE ANDS Connector~Tech is a Division of: Colourview Electronics (QLD) Pty Ltd (ABN 99 065 191 424) Unit 2, 8 Colebard
More information3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
More informationSEALED CONNECTORS FOR THE LIMIT SWITCHES
SEALED CONNECTORS FOR THE LIMIT SWITCHES LIST OF MODELS / Sealed connectors are used at the cable-connecting section of limit switches. Type and appearance Materials Features Target market Applications
More information44 CE RANGE WATERTIGHT SURFACE-MOUNTING JUNCTION BOXES
WALL BOXES IN GWPLAST 75 - GWT 650 C GWT 650 C TP 85 C WALLS WITH CABLE GLAND - IP44 AND IP55 GW44001 JUNCTION BOXES WITH PLAIN PRESS-ON LID - IP44 - GREY RAL 7035 LxHxD (mm) No. holes / Ø GW 44 001 Ø
More informationLifting bags. Lifting bags
Pneumatic tools Lifting bags 146 Lifting bags model HLB 1 HLB 3 HLB 5 HLB 10 HLB 12 HLB 18 art no 350.321.003 350.321.004 350.321.006 350.321.007 350.321.008 350.321.009 working pressure bars/mpa 8 / 0.8
More informationARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments
ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments
More information61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
More informationActuating elements for ComEx
Description A large number of variants and versions of actuating elements are available for the ComEx control and indicator units. All actuating elements are made of high-quality thermoplastic and conform
More informationpipe connectors. General description of pipe connectors Development/Design Purpose Versions
Pipe connectors General description of pipe connectors 1 STFLEX pipe connectors, just like STFLEX rubber expansion joints, have been used for more than years as the preferred connection elements in appliance
More informationEX-RECESSED CEILING LIGHT FITTINGS
EX-RECESSED CEILING LIGHT FITTINGS RLF/RLF-INOX 250 18-58 W / RLF/RLF-INOX 250... N 18-36 W Metallic design for Zone 1 and Zone 21 The RLF... explosion-protected recessed ceiling light fittings with electronic
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationwith self-sealing gas valve system
with self-sealing gas valve system R DUCTILE PVC POLSAFE GAS DISTRIBUTION SYSTEM INTRODUCTION POLSAFE is a programme of fittings for low pressure gas distribution systems. POLSAFE is designed for 25 up
More informationBourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
More informationIndustrial cable glands
Industrial cable glands SK-EMC cable glands Cable glands of the SK-series fulfil the highest demands of quality and security. Outstanding high-grade materials are used together with innovative technology
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationOperating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 24.06.2016 www.kaercher.com EN Page 2 / 51 Page 3 / 51 Page 4 / 51 Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0)
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 20.04.2016 www.kaercher.com EN Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0) 10 Housing 20 Pump set 21
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationG1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
More informationPSI Compakt - Special Seals
Pipeline Accessories PSI Compakt - Special Seals Compakt - special versions also with KTW/W270 for potable water General Information Selection Guide Order Submittal Sheet Installation Instruction 1 PSI
More information...vibration isolation. Materials Handling - Rollers
...vibration isolation Materials Handling - Technical Information from Anti-Vibration Components Solid have a smooth surface and a solid body Durasoft have a smooth contact surface with teardrop holes
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationY692VB Series Vacuum Breaker
Y692VB Series Vacuum Breaker Bulletin 71.3:Y692VB June 2009 W7429 Figure 1. Type Y692VB Vacuum Breaker Introduction The Y692VB Series direct-operated vacuum breakers are used for the precise control of
More informationPolymer Electric. Product information. Normally Closed Safety Edges SL/NC II. GmbH & Co. KG. Polymer Electric
Polymer Electric Product information Normally Closed Safety Edges SL/NC II GmbH & Co. KG Polymer Electric Örlinger Straße 1 3 89073 Ulm GERMANY Tel. 49 731 2061-0 Fax 49 731 2061-222 E-Mail: info.ulm@mayser.de
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationPegasus Series Amphenol Pcd
Pegasus Series Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
More information609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L)
1/8" Tube Thickness (3129L) 609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L) Per 3 76.2 3.47 88.1 40.28 36.0 914 1.30.59 100 ft. X 3129-0660 $26.01 4 101.6 4.47 113.5 40.28 48.0 1219 1.71.78
More informationenclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) Stainless steel and plastic enclosures for use in potentially explosive environments R Rittal system partners Perfect
More informationPneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
More informationMaterial Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
More informationseal application limit
seal application limit table of content introduction seal-mart product portfolio superior manufacturing concept availability restrictions large diameter seals important guideline for application limit
More informationTeledyne Oil & Gas North Williamson Blvd. Daytona Beach, FL USA (phone) (fax)
PER CO # 33537 Approved By: M. Bartell Originator: Checked By: S. Jackson B. Cornelius 1 of 8 ODN-084-23 23 TITLE: Installation and Operation Manual for Dry- Teledyne Oil & Gas 1026 North Williamson Blvd.
More informationVALVES HIDROMATIC VALVE.
VALVES HIDROMATIC VALVE Hydrodynamic design The Hidromatic valve of Hidroconta is a piston hydraulic valve controlled with the same fluid of the conduction. Its balloon design improves its hydrodynamic
More informationINSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
More informationTechnical Data Sheet. R&M Closures
R&M Closures About this data sheet Edition 3.0 This document has been drafted with utmost care and reflects the products July, 2013 engineering level at the time of publication. Amendments or corrections
More informationNEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
More informationVentilation Plugs (Pressure Balance Elements)
Ventilation Plugs (Pressure Balance Elements) In order to choose the right ventilation plug unit (pressure balance elements) for a specific application, the working principles of the unit must be known
More informationSpecialprofiler / Special profiles
EPDM 30.262S 30.WI660 5 Art. A (mm) B (mm) Hardness Min. order (m) Adhesive 40 30.29168 12 1 SH 65 2.000 X 30.A018615 18,6 1,5 SH 65 30.601 * 65 2,5 SH 65 500 30.600 30 3 SH 65 30.602 50 3 SH 65 30.12932-3
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
More informationSTAUFF Accumulators Accessories
Local Solutions For Individual Customers Worldwide STUFF ccumulators Clamps & Supports 28 Safety Blocks 30 Burst Discs 34 Fuse Discs 35 Replacement Back-up Bottles 36 Clamps & Supports ccumulator Clamps
More informationSKINTOP. Cable glands
able glands 486 493 Non-Metallic able Glands 503 able Bushing Systems 507 Metallic able Glands 516 EM able Glands 521 SKINIHT able Glands & lamps 531 Accessories & Tools 533 Locknuts & Fittings 537 Bushings
More informationBFT Bollards. A complete range of bollards
BFT Bollards A complete range of bollards Fixed Bollards Gas Bollards Automatic Bollards Crash Rated Automatic & Fixed Bollards Crash Tested Automatic Bollards Bollards July 2015.indd 1 24/08/2015 10:53
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges ISO PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises
More informationPressure Wave Switches. Profiles, push buttons, pressure cells and ground sensors for automatic doors, gates and barriers
Pressure Wave Switches Profiles, push buttons, pressure cells and ground sensors for automatic doors, gates and barriers Maintenance free, robust, tried-and-tested Very fast closing Pressure wave technology
More informationShri Krishna Test House, B-70/1, Gali No. 8, New Modern Shahdara, Mansarover Park, Delhi. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 14 I. PERFORMANCE TEST 1. Domestic gas Stove for use with L.P.G. General Cl. 4, IS:5116 & Cl.4.1.1 of IS:4246 Material Cl. 5 of IS:5116 Design for Maintenance Cl. 6.2, 6.3,
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationExtra wide viewing angle from single indicator lamp. Lenses made from polycarbonate and hardened glass. 10mm Panel Hole.
NORDIC N5 Headlamp The N5 integrates head light, indicator and park light in one assembly. This heavy duty light incorporates an adaptable single bolt mount featuring over 1 o of adjustment. ADR compliant
More informationT208VR Series Tank Blanketing Vacuum Regulator
February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease
More informationRubber-metal-buffers
Rubber-metal-buffers M-1 Rubber-metal-buffers Our delivery program: 1. Rubber-buffer-program 2. Rubber-moulded parts according to drawing 3. Rubber-metal-moulded parts according to drawing 4. Metalparts
More informationTA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
More informationAccessories. Finger Guards 134. Filter Guards grille 139. Accessories 140. Technology. DC Axial Fans. DC Radial Fans. Specials.
13 Technology Finger Guards 134 Filter Guards grille 139 140 Specials DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum
More informationenclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
lri030784900.eps lri031083400.eps enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) fri040466500.eps Stainless steel and plastic enclosures for use in potentially explosive
More informationC 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
More informationPneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
More informationRAUBIOXON AND RAUBIOFLEX AERATOR SYSTEMS TECHNICAL INFORMATION
RAUBIOXON AND RAUBIOFLEX AERATOR SYSTEMS TECHNICAL INFORMATION www.rehau.com Subject to technical modifications Valid from September 14 REHAU REDEFINING QUALITY IN POLYMERS WORLDWIDE RAUBIOXON AND RAUBIOFLEX
More informationCompact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
More informationFebruary Cable glands For general industry and hazardous areas
February 2017 Cable glands For general industry and hazardous areas Introduction When safety matters, there is only one choice The Nicote and Kopex range of cable glands come to ABB through the acquisition
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More information5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
More informationSolid Roller stud mount
Solid Roller stud mount 60624 Material, urethane or neoprene bonded to a steel insert. Hardness from 20-80 durometer (Shore A). Technical Notes Bearings included (held in place with snap rings). For more
More informationCYL KNIFE GATE VALVES San Sebastian Spain
CYL KNIFE GATE VALVES San Sebastian Spain INSTALATION, OPERATION & MAINTENANCE INSTRUCTIONS (XD HIGH PRESSURE) INTRODUCTION The CYL knife gate valve is a unique, patented, low cost, bi-directional on-off
More informationSelective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric
THE INNOVATOR OF OUR INDUSTRY Selective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric Protected by U.S. and International Patents Overview
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationSpare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
More informationT-CITY. Waterproof protection for LED lighting
Waterproof protection for LED lighting The T-CITY series was designed as LED lighting device for CNC machines. Elegant and compact, the T-CITY has just 38 mm diameter, making it suitable to fit small spaces.
More informationFITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable!
FITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable! 1 The New Düker Plunger Valve Type 7015 St Plunger valves
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationCABLE CONNECTORS CABLE CONNECTORS
Terminal blocks Terminal blocks E-loks... 4 Multipolar terminal strips... 49 Protected distribution terminals E-Rail... 50 Preinsulated terminals Preinsulated copper terminals... 53 Preinsulated end-sleeve
More informationRUBBER EXPANSION JOINTS
RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability.
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationType 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator
January 2009 Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator Introduction The Type 310A pilot-operated high-pressure regulator (Figure 1) is used where high capacity
More informationPrewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
More informationph measuring system for hygienic process applications
ph measuring system for hygienic process applications Sterile design, CIP-compatible, in-line sterilizable Extremely robust and unbreakable construction Extremely long service life Long calibration intervals
More informationMaterials : Electro galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises
More informationHydraulic hand spindle pump Models CPP1000-M, CPP1000-L
Calibration Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L WIKA data sheet CT 91.05 for further approvals see page 2 Applications Calibration service companies and service industry Calibrations
More informationDescription Length Width Thickness Max. Bundle Tensile Strength Screw Size Qty./Bag Cat. No.
Mounting Head Ties Natural & UV Black Cable Ties Secures and positions wire bundles, cables, hoses, etc. to panels or other surfaces with one fastener to reduce time and cost Allows bundling before and
More informationSpare parts list ( ) Spare parts list HD 2.3/15 C Ed/ 3.0/20
Spare parts list (5.970-616.0) Spare parts list HD 2.3/15 C Ed/ 3.0/20 23.09.2011 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/15 C Ed/ 3.0/20 (5.970-616.0)... 6 10
More informationNew, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
More informationAmphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications
Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. WaterMaster FEW530 Electromagnetic water meter
ABB MEASUREMENT & ANALYTICS DATA SHEET WaterMaster FEW530 Electromagnetic water meter 2 WATE RMASTE R F E W 530 ELECT ROMAGNE TIC WATE R ME TE R DS/FE W530/FE T3 -E N RE V. A Measurement made easy Cost
More informationDatasheet liniled Handrail 42.4 V1017 IK10. F RoHS FROST CLEANING AGENTS RESISTANT UV RESISTANT
Datasheet liniled Handrail 42.4 V1017 F RoHS IP40 IP68 IK10 AISI 316 UV RESISTANT FROST CLEANING AGENTS RESISTANT Handrail 42.4 Product information Technical specifications Product specifcations Required
More informationGUMMIKOMPENSATOR GKF8000 / GKF8130
GUMMIKOMPENSATOR GKF8000 / GKF8 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications
More informationHigh-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements
More informationThe Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times
Tseries Series AB AB Air Air Boosters Boosters The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times.01/1 MANIFOLD MOUNTED VALVES FOR EASY SERVICING
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationApplication Data Important Safety Information
Important Safety Information Read this page before using any of the information in this catalog. This catalog is designed to be used as a guide in selecting the proper hose for the applications listed
More informationPRESSURE REGULATORS. Type A/140. Process Management TM
PRESSURE REGULATORS Type A/140 Process Management TM A/140 Series Pressure Regulator The regulators of the A/140 series due to their operating specifications are mainly used in those system where sudden
More information