K1 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K1 ISI 316L* 78 1/4" NPT-F 1/4" NPT-F K06SV4NF4NF F51* K06V4NF4NF F55* K06EV4NF4NF LLOY 400* K06FV4NF4NF 276* K06GV4NF4NF K06HV4NF4NF I625* K06IV4NF4NF ISI 316L* 82 3/8" NPT-F 3/8" NPT-F K06SV6NF6NF F51* K06V6NF6NF F55* K06EV6NF6NF LLOY 400* K06FV6NF6NF 276* K06GV6NF6NF K06HV6NF6NF I625* K06IV6NF6NF ISI 316L* 86 1/2" NPT-F 1/2" NPT-F K06SV8NF8NF F51* K06V8NF8NF F55* K06EV8NF8NF LLOY 400* K06FV8NF8NF 276* K06GV8NF8NF WG NME: LK1.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NF8NF NOTE I625* K06IV8NF8NF * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K2 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K2 ISI 316L* 78 1/4" NPT-F 1/4" NPT-M K06SV4NM4NF F51* K06V4NM4NF F55* K06EV4NM4NF LLOY 400* K06FV4NM4NF 276* K06GV4NM4NF K06HV4NM4NF I625* K06IV4NM4NF ISI 316L* 86 3/8" NPT-F 3/8" NPT-M K06SV6NM6NF F51* K06V6NM6NF F55* K06EV6NM6NF LLOY 400* K06FV6NM6NF 276* K06GV6NM6NF K06HV6NM6NF I625* K06IV6NM6NF ISI 316L* 93 1/2" NPT-F 1/2" NPT-M K06SV8NM8NF F51* K06V8NM8NF F55* K06EV8NM8NF LLOY 400* K06FV8NM8NF 276* K06GV8NM8NF WG NME: LK2.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM8NF NOTE I625* K06IV8NM8NF * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K3 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K3 ISI 316L* 89 1/4" NPT-M 1/4" NPT-M K06SV4NM4NM F51* K06V4NM4NM F55* K06EV4NM4NM LLOY 400* K06FV4NM4NM 276* K06GV4NM4NM K06HV4NM4NM I625* K06IV4NM4NM ISI 316L* 90 3/8" NPT-M 3/8" NPT-M K06SV6NM6NM F51* K06V6NM6NM F55* K06EV6NM6NM LLOY 400* K06FV6NM6NM 276* K06GV6NM6NM K06HV6NM6NM I625* K06IV6NM6NM ISI 316L* 100 1/2" NPT-M 1/2" NPT-M K06SV8NM8NM F51* K06V8NM8NM F55* K06EV8NM8NM LLOY 400* K06FV8NM8NM 276* K06GV8NM8NM WG NME: LK3.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM8NM NOTE I625* K06IV8NM8NM * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K4 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K4 ISI 316L* 90 6 O 1/4" NPT-M I625* K06IV6NM8 ISI 316L* K06SV8NM10 K06SV4NM6 F51* K06V4NM6 F55* K06EV4NM6 LLOY 400* K06FV4NM6 276* K06GV4NM6 K06HV4NM6 I625* K06IV4NM6 ISI 316L* 92 8 O 3/8" NPT-M K06SV6NM8 F51* K06V6NM8 F55* K06EV6NM8 LLOY 400* K06FV6NM8 276* K06GV6NM8 100 10 O K06HV6NM8 F51* K06V8NM10 F55* K06EV8NM10 LLOY 400* K06FV8NM10 276* K06GV8NM10 K06HV8NM10 I625* K06IV8NM10 1/2" NPT-M ISI 316L* K06SV8NM12 F51* K06V8NM12 F55* K06EV8NM12 LLOY 400* 102 12 O K06FV8NM12 276* K06GV8NM12 WG NME: LK4.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM12 NOTE I625* K06IV8NM12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K4 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K4 ISI 316L* 90 1/4 O 1/4" NPT-M I625* K06IV6N6 ISI 316L* K06SV8N8 K06SV4N4 F51* K06V4N4 F55* K06EV4N4 LLOY 400* K06FV4N4 276* K06GV4N4 K06HV4N4 I625* K06IV4N4 ISI 316L* 92 3/8 O 3/8" NPT-M K06SV6N6 F51* K06V6N6 F55* K06EV6N6 LLOY 400* K06FV6N6 276* K06GV6N6 100 1/2 O K06HV6N6 F51* K06V8N8 F55* K06EV8N8 LLOY 400* K06FV8N8 276* K06GV8N8 K06HV8N8 I625* K06IV8N8 1/2" NPT-M ISI 316L* K06SV8N12 F51* K06V8N12 F55* K06EV8N12 LLOY 400* 102 3/4 O K06FV8N12 276* K06GV8N12 WG NME: LK4.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8N12 NOTE I625* K06IV8N12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K5 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K5 ISI 316L* 85 6 O 1/4" NPT-F I625* K06IV6NFM8 ISI 316L* K06SV8NFM10 K06SV4NFM6 F51* K06V4NFM6 F55* K06EV4NFM6 LLOY 400* K06FV4NFM6 276* K06GV4NFM6 K06HV4NFM6 I625* K06IV4NFM6 ISI 316L* 89 8 O 3/8" NPT-F K06SV6NFM8 F51* K06V6NFM8 F55* K06EV6NFM8 LLOY 400* K06FV6NFM8 276* K06GV6NFM8 92 10 O K06HV6NFM8 F51* K06V8NFM10 F55* K06EV8NFM10 LLOY 400* K06FV8NFM10 276* K06GV8NFM10 K06HV8NFM10 I625* K06IV8NFM10 1/2" NPT-F ISI 316L* K06SV8NFM12 F51* K06V8NFM12 F55* K06EV8NFM12 LLOY 400* 94 12 O K06FV8NFM12 276* K06GV8NFM12 WG NME: LK5.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NFM12 NOTE I625* K06IV8NFM12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K5 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K5 ISI 316L* 85 1/4 O 1/4" NPT-F I625* K06IV6NF6 ISI 316L* K06SV8NF8 K06SV4NF4 F51* K06V4NF4 F55* K06EV4NF4 LLOY 400* K06FV4NF4 276* K06GV4NF4 K06HV4NF4 I625* K06IV4NF4 ISI 316L* 89 3/8 O 3/8" NPT-F K06SV6NF6 F51* K06V6NF6 F55* K06EV6NF6 LLOY 400* K06FV6NF6 276* K06GV6NF6 92 1/2 O K06HV6NF6 F51* K06V8NF8 F55* K06EV8NF8 LLOY 400* K06FV8NF8 276* K06GV8NF8 K06HV8NF8 I625* K06IV8NF8 1/2" NPT-F ISI 316L* K06SV8NF12 F51* K06V8NF12 F55* K06EV8NF12 LLOY 400* 94 3/4 O K06FV8NF12 276* K06GV8NF12 WG NME: LK5.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NF12 NOTE I625* K06IV8NF12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
K6 O 4,6 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K6 ISI 316L* 92 6 O 6 O I625* K06IVM8M8 ISI 316L* K06SVM10M10 K06SVM6M6 F51* K06VM6M6 F55* K06EVM6M6 LLOY 400* K06FVM6M6 276* K06GVM6M6 K06HVM6M6 I625* K06IVM6M6 ISI 316L* 96 8 O 8 O K06SVM8M8 F51* K06VM8M8 F55* K06EVM8M8 LLOY 400* K06FVM8M8 276* K06GVM8M8 99 10 O 10 O K06HVM8M8 F51* K06VM10M10 F55* K06EVM10M10 LLOY 400* K06FVM10M10 276* K06GVM10M10 K06HVM10M10 I625* K06IVM10M10 ISI 316L* 103 12 O 12 O K06SVM12M12 F51* K06VM12M12 F55* K06EVM12M12 LLOY 400* K06FVM12M12 276* K06GVM12M12 WG NME: LK6.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. K06HVM12M12 NOTE I625* K06IVM12M12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. 0,5 Kg Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205
K6 O 4,6 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K6 ISI 316L* 92 1/4 O 1/4 O I625* K06IV66 ISI 316L* K06SV88 K06SV44 F51* K06V44 F55* K06EV44 LLOY 400* K06FV44 276* K06GV44 K06HV44 I625* K06IV44 ISI 316L* 96 3/8 O 3/8 O K06SV66 F51* K06V66 F55* K06EV66 LLOY 400* K06FV66 276* K06GV66 99 1/2 O 1/2 O K06HV66 F51* K06V88 F55* K06EV88 LLOY 400* K06FV88 276* K06GV88 K06HV88 I625* K06IV88 ISI 316L* 102 3/4 O 3/4 O K06SV1212 F51* K06V1212 F55* K06EV1212 LLOY 400* K06FV1212 276* K06GV1212 WG NME: LK6.06.001.dft - REV.: - TE: 07/12/2017 - I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. K06HV1212 NOTE I625* K06IV1212 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. 0,5 Kg Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205
HEK VLVES 1 2 3 4 5 6 7 8 9 10 11 12 MOEL K HEK VLVE K RTING 06 6000 PSI 10 10000 PSI MTERIL S isi 316L 105 F51 E F55 F Monel 400 G 276 Hastelloy H 6 Mo/F44 I Inconel 625 PKING V VITON IN 4 1/4" 6 3/8" 8 1/2" 12 3/4" 20 M20 x 1,5 THRE N NPT I SPP GS (ISO 1179) R SPP GS (EN 837-1) - Gauge connection K SPT R/R (IS) S Socket Weld M ISO THRE TYPE M MLE F FEMLE OUT (Same as "IN" standard) 4 1/4" 6 3/8" 8 1/2" 12 3/4" 20 M20 x 1,5 THRE (Same as "IN" standard) N NPT I SPP GS (ISO 1179) R SPP GS (EN 837-1) - Gauge connection K SPT R/R (IS) S Socket Weld M ISO THRE TYPE(Same as "IN" standard) M MLE F FEMLE EX.: K 0 6 S V 8 N M 8 N M