V-22 Fetures. * Modulr ssemly system, suitle for 'uild rogrm'. * Mx. operting pressure 420 r. * Different spooltypes up to 330 l/min. in comintion with simultneously control. * Compct sndwich design, suitle for moile pplictions. * Severl inlet plte types ville for different types of pumps. * Operting control in ny comintion (electricl, mnul nd hydrulic). * djustle for setting the mximum flow. * Severl user relief options s primiry-, shock-, suction- nd remote control functions. * One full flt surfce for mounting in ny position. * Stndrd sewter resistnt ul.-v22-e-12/11
ECHNIC D Mx. flow : Mx. pressure: port // port ressure setting rnge port 1 or 2 port 1 + 2 Comiplte port 1 or 2 (22) Comiplte port 1 + 2 (22) port / port / without compenstor Nominl pressure drop over 2-wy compenstor (,) Internl pilot pressure supply ilot pressure for electricl nd hydrulic control Spool stroke Spool overlp (ded nd) Fluid Fluid temperture rnge Viscosity rnge Contmintion level mx Mounting position Connections ort ort ort / ort S ort ort Y,Y Electricl connections Electricl Nominl voltge Nominl current Coil resistnce Recommended dither frequency ype of protection Duty cycle Hysteresis Flow Different flowtypes: (with compenstor) 300 / 320 l/min * 660 l/min 320 l/min 660 l/min 330 l/min 380 l/min 420 r 35 r 13-420 r Mnul operting 20-420 r Electricl operting 7 r 28 r 6-20 r 7 mm 1,45 mm (21% of the spool stroke) Minerl oil ccording to DIN 51524/51525-30 + 80 C 10 500 cst, optiml 30cSt ccording to NS 1638 Clss 8 or ISO 4406: 18/16/13 Optionl S SE OR G1 1/4" 20 G1 1/2" 24 G1 1/4" 20 G1/4" 6 G1/4" 6 G1/4" 6 M Junior ower imer 12 VDC or 24 VDC 12 VDC = 1300 m 24 VDC = 650 m 12 VDC = 5.3 5% 24 VDC = 21.2 5% 100 Hz I 65 100% 3% * umpflow, see note pge 16 330 Spool 250 260 Spool 200 Flow q : l/min v 150 100 50 150 Spool 0 0 Control current 0 300 600 400 800 500 1000 600 1200 700 m 24 VDC 1400 m 12 VDC Stroke 0 1 2 3 4 5 6 7 mm 0 ilot pressure 5 10 15 20 22 r ever ngle 0 5 10 15 20 25 30 34 2
ECHNIC D echnicl informtion. he unique modulrity of the V enles system solutions for mnufcturers of moile mchines, s wide rnge of functions cn e integrted/chnged y the customer in n esy, flexile nd cost-effective wy. Inlet lte. Inlet pltes re ville for fixed nd vrile displcement pumps, nd constnt pressure networks. Functions s: - nti-sturtion; - pump unloding; - pressure relief; - S signl mplifier nd comintions thereof; cn e integrted into the inlet plte. Control Vlve. he control vlve consists of spool section nd connection lock. Spool Section. he min dvntge of the V-series is the stndrdiztion of the spool section. Different types of spools nd control methods re ville. Up to 10 control vlves, with or without 2-wy compenstor cn e stcked. For perfect system stility the 2-wy compenstor cn e equipped with dmping function. Check vlve function is lso ville within this compenstor. Stroke limittion per port nd Δp-setting per section is stndrd. Connection lock. very wide rnge of optionl functions cn e delivered using severl, esy to mount, low cost, connection locks. esides sic connection lock, optimized customiztion cn e chieved y the following functions: - remote controlled pressure setting/unloding per port; - djustle secondry pressure setting per port; - suction vlves nd shock/suction vlves per port; - djustle primry port relief per port with excellent relieving chrcteristic. ny other specil functions cn e esily integrted into specil connection locks on request. End lte. lso the end pltes for different control methods cn e equipped with optionl functions s: - dditionl -port; - Z-port to enle S-cscde with nother vlve; - feeding point for hydrulic joysticks. Sfety. o comply with ntionl nd interntionl sfety regultions, specil sfety functions cn e integrted s descried ove. Serviceility. he modulr concept ( uild-progrm) improved the servicing of the V. ll orifices nd shuttle vlves re directly ttinle from the outside of the vlves. Symols nd erminology. Grphic symols in ccordnce with ISO1219-1. Identifiction of vlve ports in ccordnce with ISO 9461. For the purposes of this document, the definitions nd terminology given in ISO 5598 nd the following definitions pply: - S : lod sensing - rimry relief : relief function in the flow line, e.g. the 3-wy compenstor in the inlet plte nd the shock/suction vlve in the connection lock. - Secondry relief : relief function in the signl line, e.g. mx. lod pressure relief in the inlet plte. Ordering code Dimension pplictions E nd plte Control vlve Inlet plt e echnicl dt 3
ECHNIC D Modulrity Inlet plte D1,2,3,4 : ump unloding function E1,2 : Electricl proportionl pressure relief D1,2,3,4 : ump unloding function E1,2 : Electricl proportionl pressure relief : nti-sturtion : nti-sturtion nd S-mplifier 22N 22S : S-mplifier : nti sturtion 22R 22U Connection lock (Some possiilities) (2x) F : ressure setting F : ressure setting : djustle port relief vlve Y : Remote control connection Y : Remote control connection Y : Remote control connection Y : Remote control connection Z : Shock/suction vlve Z N : Suction vlve N Spool section E : Electricl proportionl E : Electricl proportionl OJ : Hydrulic proportionl OJ : Hydrulic proportionl E : Electricl proportionl H : Mnul proportionl H : Mnul proportionl OJ : Hydrulic proportionl F : With compenstor F1 : With compenstor incl. check vlve function F2 : With dmped compenstor F3 : With dmped compenstor incl. check vlve function N : No compenstor N1 : With check vlve function Min spool type,,c,d,f,g,k,o End plte 22H 22J : With dditionl -port : With dditionl -port Z: With Z-port 4
S ECHNIC D Exmple: 1C os. 1 1 1 1C 1D 2 2 2 2C 2D 2E 2F 2G 2H 2I 2J 2K 3 3 3 3C 4 4 4 1 1 1 1 1D 1 3 2C 2D 2 Description: Inlet plte, severl types ville for different types of pumps djustle lod pressure relief, stndrd on ll types of inlet plte ump relief function S mplifier, for strong signl nd perfect stility of the S-pump Electricl proportionl pressure relief Spool section, sic section for different min spool types nd compenstor vrints 2-wy compenstor for lod-independent control nd simultneously opertion Flow djustment y regulting the pressure drop cross the min spool Control method: Electricl proportionl dditionl mnul control Min spool type djustle stroke limittion for djusting the mx. flow per port s 2, with check vlve to -line Control method: Mnul proportionl No 2-wy compenstor per section Control method: Hydrulic roportionl dditionl mnul control Connection lock, seprte lock for ll different types of options Remote control connection on port nd (optionl) djustle pressure setting on port nd (optionl) Shock/Suction vlves port nd (optionl) End plte ressure reducing vlve, for electricl control dditionl pump connection (optionl) 2E 2 2 2F 3 3 Y 2H 2G 3 Y 3 2J 2K 2 I 3C Description 0 2 2 4 4 4 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 5
INE E INE E For every pumptype n inlet plte is ville: Fixed displcement pump Fig.1 he V inlet plte version 22U, fig. 1, is designed for fixed displcement pumps. he min relief in this section is functioning s 3-wy compenstor. If none of the control sections re in opertion, the inlet plte version 22U cretes out 14 r in the pumpline. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded. he lod signl pressure is lso controlled y the mx. lod pressure relief. his relief cn e djusted (14 420 r). o feed lso nother circuit, n inlet plte 22R is ville. (see ppliction exmples). M 1 1 22U420 Vrile displcement pump (S-pump) Fig.2 Fig.3 he V inlet plte versions 22N nd 22S re designed for this pump type. he version 22N, fig. 2, hs the function s inlet lock for, nd S (lod sense line). he lod sense signl from the vlvelock cn e djusted, up to 420 r, with the relief vlve. 1 1 Version 22S, fig. 3, hs n overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pumpflow to tnk. S 1 S 1 ressure compensted pumps / Constnt pressure networks he V inlet plte version 22N, fig. 2, is lso designed for pressure compensted pumps nd constnt pressure networks. It hs the function s inletlock for,. he S connection G1/4" hs to e locked. he lod signl pressure is controlled y the mx. lod pressure relief. he mx. lod pressure of the vlve lock cn e djusted (up to 420 r). 22N420 22S420 Fig.1 Fig.2 Fig.3 22U420 22N420 22S420 6
INE E dditionl functions for ll types of pumps: nti-sturtion function, code, fig. 4 he nti-sturtion function is developed for electricl nd hydrulic controlled vlves. If the vlve lock hs insufficient pumpflow, the user flow for every control section will e reduced with this function so tht every control section keeps working simultneously. Electricl proportionl pressure relief, code E, fig. 5 For remote control of the mximum pressure of the vlve lock, the electricl proportionl pressure relief is ville in 12 VDC nd 24 VDC. ump unloding function, code D, fig. 6 For emergency stop function the lod pressure signl from the control sections cn e unloded directly to tnk. he electricl control is ville in 12 VDC nd 24 VDC with 2/2-wy crtridge in norml-open or norml-closed configurtion. he exmple shows norml-open configurtion. lese note tht the recircultion pressure or stnd-y pressure is still on the -line. dditionl function for S pumps: S mplifier, code, fig. 7 his option enles incresing the S pressure signl if some S-pumps hve continuous lek of the lod-pressure signl to tnk. his option cn lso e used for fine-tuning of the stility of the pump nd the proportionl control. With the djustment screw the stnd-y pressure of the S-pump is djustle within 4 r. Fig.4 Fig.5 S 1 1 Fig.4 Fig.5 22S420D/E S S 1 Fig.7 M 1 1 Fig.7 22S420 1 Fig.6 22N420 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 7
INE E COMI INE E If different flows re needed, for exmple 250 nd 75 l/min or less, comintion plte is ville to connect the series V-16 to the series V-22. his is the most chepest nd flexile wy for compct comintion of proportionl directionl control vlves. he comiplte is ville for modelnumer 22N, 22S, 22U nd 22R. Fixed displcement pump he V comi inlet plte version 22U/C, fig. 1, is designed for fixed displcement pumps. he min relief in this section is functioning s 3-wy compenstor. If none of the control sections re in opertion, the inlet plte version 22U/C cretes out 14 r in the pumpline. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded. he lod signl pressure is lso controlled y the mx. lod pressure relief. his relief cn e djusted (14 420 r). o feed lso nother circuit, n inlet plte 22R is ville. 1 Fig.1 22U420/C Vrile displcement pump (S-pump) Fig.2 Fig.3 he V comi inlet plte versions 22N/C nd 22S/C re designed for this pump type. he version 22N/C, fig. 2, hs the function s inlet lock for, nd S (lod sense line). he lod sense signl from the vlvelock cn e djusted, up to 420 r, with the relief vlve. Version 22S/C, fig. 3, hs n overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pumpflow to tnk. 1 ressure compensted pumps / Constnt pressure networks he V comi inlet plte version 22N/C, fig. 2, is lso designed for pressure compensted pumps nd constnt pressure networks. It hs the function s inletlock for,. he S connection G1/4" (SE 6) hs to e locked. he lod signl pressure is controlled y the mx. lod pressure relief. he mx. lod pressure of the vlve lock cn e djusted (up to 420 r). 22N420/C 22S420/C Fig.1 Fig.2 Fig.3 22U420/C 22N420/C 22S420/C 8
INE E dditionl functions for ll types of pumps: nti-sturtion function, code, fig. 4 he nti-sturtion function is developed for electricl nd hydrulic controlled vlves. If the vlve lock hs insufficient pumpflow, the user flow for every control section will e reduced with this function so tht every control section keeps working simultneously. Electricl proportionl pressure relief, code E, fig. 5 For remote control of the mximum pressure of the vlve lock, the electricl proportionl pressure relief is ville in 12 VDC nd 24 VDC. ump unloding function, code D, fig. 6 For emergency stop function the lod pressure signl from the control sections cn e unloded directly to tnk. he electricl control is ville in 12 VDC nd 24 VDC with 2/2-wy crtridge in norml-open or norml-closed configurtion. he exmple shows norml-open configurtion. lese note tht the recircultion pressure or stnd-y pressure is still on the -line. dditionl function for S pumps: S mplifier, code, fig. 7 his option enles incresing the S pressure signl if some S-pumps hve continuous lek of the lod-pressure signl to tnk. his option cn lso e used for fine-tuning of the stility of the pump nd the proportionl control. With the djustment screw the stnd-y pressure of the S-pump is djustle within 4 r. Fig.4 Fig.5 1 1 1 Fig.5 1 S 22S420D/E/C Fig.4 S 22S420/C 1 S Fig.7 Fig.7 1 M 22N420/C Fig.6 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 9
CONRO VVE CONRO VVE. On the sis of the uild-progrm principles the V-22 control vlve consists of I stndrdized spool section nd II sic or customized connection locks nd spring- nd endcps. Mx. 10 control sections. I Spool section: 1 Compenstor types; 2 Control method : electricl, hydrulic nd mnul control; 3 Spool types; 4 Flow per port. 4 3 Fig.8 2 1 1. Compenstor types : he vrious compenstors enle lod independent flow control nd possiility of simultneous opertion. he mx. flow cn e pre-djusted y djusting the compenstor spring. t prt 1 from fig. 8 the following types cn e mounted: Code: F: 2-wy compenstor F1: 2-wy compenstor with lod-hold check vlve F2: 2-wy compenstor with dmping function. F3: 2-wy compenstor with lod-hold check vlve nd dmping function. N: Without compenstor. *Note: Mx. flow depends on stnd-y pressure setting in cse of using S-pump N1: od-hold check vlve. *Note: Mx. flow depends on stnd-y pressure setting in cse of using S-pump 10 9
CONRO VVE 2. Control method : 3. Spool types. he spool is ville for different types of users, like single nd doule cting cylinders nd hydrulic motors. C D E = electricl control Code: Symol: Remrk In neutrl position ll ports locked H = mnul control OJ: hydrulicl control: For hydrulic remote control, the endcps hve G1/4" connections. In neutrl position port throttled flow to (pprox.20% of nominl flow) In neutrl position port + throttled flow to (pprox.20% of nominl flow) In neutrl position port throttled flow to (pprox.20% of nominl flow) Code: F G K O Symol: OJ = hydrulic control he electricl- nd hydrulic control cn e configured in comintion with n dditionl mnul control. ll the control methods re stndrd equipped with stroke limiters for seprte fine-tuning the flow of nd/or port. he crtridge cvity in the end-cps is suitle for ll three control methods. E: electricl control: he reducing crtridge is integrted within the proportionl solenoid 24 VDC or 12 VDC. ll the control sections hve pilot supply pressure nd return line, which must e fed through the end plte type 22E. he 22E end plte is equipped with seprte ""-connection to drin the pilot return line to tnk, which cretes perfect system stility. H: mnul control: If the hndle is not ctuted, the spring ssemly keeps the spool in neutrl position (code HF). he mnul control cn e configured with detent or friction rke. Detent (code HR): the spool cn e set in ny position, the center position nd oth end positions re perceptile. Friction rke (code H): the spool cn e set in ny position, the center position is perceptile. Remrk In neutrl position ll ports locked In neutrl position port + throttled flow to (pprox.20% of nominl flow) In neutrl position ll ports locked, port lended * In neutrl position ll ports locked, port lended * * ort is lended with stop in the connection lock 4. Flow per port. Ech user port cn e set t different flow. he flow with compenstor is up to 330 l/min. y djusting the compenstor spring (Δp djustment) the flow of nd port cn e pre-djusted. y using the stroke limiters the flow of nd/or port cn e djusted seprtely. Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 10 11
CONRO SECION CONRO VVE II Connection lock. he min flexiility of V series is relized y vrious connection locks with very wide rnge of optionl functions. he connection lock is the only prt to e customized in order to meet specil requirements. he ville connection locks re: 1 - sic version only with nd ports 2 - version with secondry sfety functions 3 - version with primry nd secondry sfety functions 4 - customized versions he code of the connection lock hs to strt with the type of the thred of the connection port (1 1/4" S or SE 20). he other threds re on request. 1. sic version: he sic version is connection lock with only nd ports. code: : he connection nd port is 1 1/4" S. S: he connection nd port is SE 20 2. Version with secondiry sfety functions: xxxxx- xxxxx-s he version with secondry sfety functions is connection lock with possiility of two secondry sfety functions. Secondry sfety functions re ctive t the lod pressure signl lines, so overpressure (reched mximum lod pressure) cuses smll mount of oil from the lod sense signl vented to tnk t mximum pressure. his in contrst with the primry relief vlves, wherey the full userflow hs to e vented to tnk t mximum pressure. Secondry reliefs re only in function if the control vlve is ctuted. Code: F: djustle pressure setting on port nd : Ech user port cn e set with seprte mximum lod pressure relief. (S-relief) Fctory pressure setting (first -port then -port) hs to e mentioned in the order code. djustle pressure setting only on one port, stte "-" for the other port. Exmple: -port = 380 r nd -port = 320 r: "F= 380/320 r" or only -port = 380 r: "F= 380/- r" Y xxxxx-fy xxxxx-fy Y Y: Remote control connection on port nd : he lod pressure signl of ech userport cn e connected to sytem sfety relief devices, through Y nd Y(1/4"S or SE 6). Exmple: cylinder stroke limiting or overlod control function in comintion with 2/2-wy vlve to tnk. Y F F Y 1. 2. 12
CONRO VVE 3. Version with primry nd secondry sfety functions: he version with primry nd secondry sfety functions is connection lock with possiility of three primry sfety functions nd two secondry sfety functions. rimry sfety functions re ctive t the user port, even if the control section is not operted. rimry sfety functions re ville in 3 different types. hese types cn e used in the sme crtridge cvity. -port s well -port cn e configured s specific primry sfety function. Code: N: : Z: Suction vlves port nd he suction vlve per userport prevents cvittion in the user line. xxxxx-fny xxxxx-sfny djustle port relief on port nd djustle primry port relief vlve prevents the user line ginst overpressure during opertion nd lso in neutrl position. he flow over the relief is mximum 330 l/min. he pressure setting rnge is 13-420 r. Fctory pressure setting (first -port then -port) hs to e mentioned on configurtion code. djustle pressure setting only on one port, stte "-" for the other port. xxxxx-fy xxxxx-sfy Exmple: -port = 320 r nd -port = 280 r give orderingcode "G=320/280" -port = 320 r nd -port = no port relief give orderingcode "G=320/-" Shock/Suction vlves in port nd Comined shock/suction vlves prevents the user line to relief temporry pressure peks nd prevent cvittion. Fctory pressure setting (first -port then -port) hs to e mentioned on configurtion code. djustle pressure setting only on one port, stte "-" for the other port. Exmple: -port = 380 r nd -port = 320 r: "Z= 380/320 r" or for only -port = 380 r: "Z=380/- r" xxxxx-fzy xxxxx-sfzy Note: - If -port needs Z-function 280 r nd -port needs -function 280 r, plese note t the connection plte configurtion: "Z=280/-" nd "= -/280". - dditionl, options "F" nd/or "Y" cn e configured. N, or Z Y F 3. F Y Y Y Y N, or Z Y Y Y Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 13
CONRO SECION CONRO VVE 4. Customized version: Connection lock with 4 S-reliefs, 2 remote control connection nd 2 2/2-wy normlly closed electricl crtridges. Connection lock for comining the mount of 2 sectionl flow's to 1 common SE-port. Suction vlves or shock/suction vlves on / possile. Connection lock with S-reliefs nd 1 check vlve. he unique modulrity of the V enles systems solutions for mnufcturers of moile mchines, s wide rnge of functions cn e integrted/chnged y the customer in n esy, flexile nd cost-effective wy. Some exmples re shown elow. OJ E E OJ Spring nd endcp with doule control method electricl nd hydrulic proportionl. 14
CONRO VVE Doule endcp for common piloting of 2 sections together. Comintion V-16 nd V-22. V-22 vlve lock dded to specil size 32 mnifold. 14 Doule springcp for common piloting of 2 sections together. Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 15
END E 2 Code H: For control method H or O End plte for mnul or hydrulic operted vlves. 2 V..H O V..J 2 2 Code J: For control method E or O End plte with uilt-in pressure reducing vlve for internl pilot pressure supply of 28 r to the electricl pilot vlves of ech electricl proportionl control vlve or for externl pilot pressure supply of 28 r to the hydrulic joysticks. Note: he -connection hs to e connected s seperte drin to tnk. O 2 Code : With dditionl -port dditionl -port to connect n extr -line in systems with high pump flow. V..J.. 2 22H/ 22J 16
END E 0 V..J.. O V..J..Z M Ø 2 2 2 Z 2 Code : With dditionl -port dditionl -port. Code Z: With Z-port Z-port to connect the S-signl of second vlve to the S-cscde of the first vlve, to e le to use the compenstor of the first vlve. Note: In systems with pumpflow > 380l/min use endplte with 2 port (Ordering code 22...). For reduction of the return pressure the use of the second tnk connection 2 on the end plte is possile (ordering code 22...). S 1 1 22S420 22FOJC200/220/F 16 22FOJC300/250/F O 22J2 Z 2 2 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 17
ICIONS Exmples Exmple inlet plte code U. 1 0 2 M 1 2 22U420 22FEMC300/300/ 22FEMC300/300/F 22FEMC300/300/ 22J3 Code U: Inlet plte for fixed displcement pump: 22U420 If none of the control sections re in opertion, the integrted 3-wy compenstor of the inlet plte 22U recircultes the flow to tnk. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded (see shuttle vlve cscde system). he mximum lod signl pressure is controlled y the mx. lod pressure relief. If one or more of the users hve to e set on lower mx. pressure, the control section cn e configured with pressure reliefs per port (see for exmple the second section). Y Y 1 1 2 2 M 1 Z 2 22U420 22FHC/ 22FHC/FY 22H2-Z 22N420 22FHC/ 22H- S 1 2 rllel circuit with fixed displcement pump: 22U nd 22N When two vlve locks should e mounted on different plces in system one vlve lock cn e configured with 22N inlet plte. he vlve lock with the 22U is regulting the pump flow nd the end plte 22-Z hs to e connected to the S port of the second vlve lock with 22N inlet plte. he mx. lod pressure relief of the 22N inlet plte hs to e djusted eqully or lower s the mx. lod pressure relief t the min inlet plte 22U. 18 17
ICIONS Exmple inlet plte code N. Code N: 22N420 22FHFC150/200/ 22FHFC250/250/ 22FH330/330/ Inlet plte for S-pumps: 22N240 he version 22N is the inlet plte for the, nd S connection. he djustle mx. pressure relief for the lod signl is stndrd integrted. Series circuit with fixed displcement pump: 22U nd 22R For the sme condition s the prllel circuit series circuit cn e used. he dvntge of series circuit is tht there is not longer S signl line tht shll give lower signl under colder conditions. In the 22R inlet plte the tnk circuit is disconnected from the control sections nd there is n dditionl possiility of directing the pump flow from to R in order to feed nother circuit. lese note tht with this type of vlve lock the 2 connection in the end plte hs to e connected with tnk. M Ø M S 1 R 1 M 1 1 22U420 22FOJC/F 22FOJC/F 22FOJC/F 22H3J 22R420 22FOJM/ 22FOJM/F 22H2J O 2 2 22H3 2 2 O 2 2 Exmples Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 19
ICIONS Exmples Exmple inlet plte code S. 1 0 2 S 1 2 22S420 22FOJC330/330/F 22FOJC280/220/F 22J2 M Ø Code S: Inlet plte for S-pump: 22S420 he version 22S hs primry overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pump flow to tnk. 1 0 2 S 1 22N420 2 M Ø 1 0 2 S 1 2 22N420 20 19
ICIONS Y Y 1 S 1 Y Y Y Y Exmples 0 2 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 21
K In neutrl position ll ports locked, port lended O In neutrl position ll ports locked, port lended For WIN ody only: Q WIN C spool, (C in 1st section, in 2nd section) R WIN spool. (2 spools) Connection ports Mx. flow (l/min) (V-22) port / port 1 380 S SE OR 2: 1 1/4" 330, (660) 20for WIN,2 3: 1 1/2" 300 24, : 1 1/4" 20 4 250, (500) for WIN S : 1/4" 6 5: 1/4" 150 6 Y,Y 6: 1/4" 80 6 0 : 1/4" 6 Z 7: 1/4" 30, grooved 6 spool only in comintion with mnul control - none re-tension (optionl) - none x 20 r DIMENSIONS 231 218 178,5 155,5 34 111 35,8 68,5 61 61 61 67 111 14,5 Inlet plte Directionl control vlve End plte 81,5 14 Y 2 Z 22,2 34,7 35,5 62 87 120,5 180 172 191 68 64 4 49,4 32,5 1 1 66,5 Y F Y F F Y F 0 2 31 38,5 14 65,4 150 59 61 66,5 34 231 15 13,7 M S 22
D WIN connectionlock SE OR E WIN connectionlock code 61 SE 1" flnge ** only on request Connection lock ody FY s/s + Y ports 1 For shock / suction Z1, 1,2,3 nd N1 with 'Y' port s/ included Mounting D1 for holes dump or M14 Elec x prop 17 relief in common signl s s D2 for dump or Elec prop relief in s nd s - none S pressure setting rnge E nd < 100 r 15 F nd > 100 r 30 G > 100 r < 100 r H <100 r > 100 r Crtridge -sdie / side only with ody: Z1 shock suction S/S 1 N1 suction /S 1 1 shock /S 1 XX dummy /S 1 ZC shock suction for WIN C1 NC suction for WIN C1 C shock for WIN C1 DIMENSIONS 145 Weight: Inlet plte 22N 22U/S/R Opt. D/E Opt. / 14 CRRIDGES NOG VERDER UI E REIDEN Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy Spool section 22FE* 22FE*M 22FH 22FOJ 22FOJM 14,5 End plte N 84 85 7,5 12 87 89 88 85 88 67 61 Directionl control vlve Weight: Connection lock FY FZY End plte 22H 22J 61 61 68,5 35,8 N 30 32 65 83 83 53,5 Inlet plte 30 15 85,5 152 Weight ssemly kit: with 1 control vlve with 2 control vlve with 3 control vlve with 4 control vlve with 5 control vlve with 6 control vlve with 7 control vlve with 8 control vlve with 9 control vlve with 10 control vlve N 2,91 3,57 4,23 4,89 5,55 6,21 6,87 7,53 8,19 8,85 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 23
DIMENSIONS Connection ports 34 1 1 S Y,Y 0 Z S SE OR : 1 1/4" 20 : 1 1/2" 24 : 1/4" 6 : 1/4" 6 : 1/4" 6 : 1/4" 6 231 34 V-22, 2 V-16, 2 : 1 1/4" 20 : 1 1/2" 24 : 1/4" 6 : 3/4" 12 : 3/4" 12 : 1/8" 4 172 191 34,7 22,2 35,5 62 Z 120,5 2 83,25 174 55,5 40,25 231 111 77 14,5 67 61 74,5 56 53 9,5 End plte V-16 Inlet plte comi End plte V-22 Control vlve V-16 Control vlve V-22 66,5 69,5 54 38,5 31 Y 1 Y 14 49,4 65,4 44,75 2 F F F F 2 24,5 0 Y 1 0 Y 55 120 150 189 136 89,75 49 16 27,4 170 35,1 2 Z 34 34 203 14 24 23
DIMENSIONS Mounting holes V-22: M14 x 17 Mounting holes V-16: M8 x 12 108,5 27,5 31,7 9,5 53 56 74,5 61 67 14,5 End plte V-16 Control vlve V-16 Inlet plte comi Control vlve V-22 End plte V-22 15 35 166 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 25
CONFIGURION CODE INE E Size 22 22 uild type K Sndwich Suplte ody type C Comi inlet V-22/16 type - stndrd V-22 type lte version U For fixed displcement pump UH For fixed displcement punp, high flow > 100 l/min S For S-pump nd mx. pressure vlve in N For S-pump nd S svety vlve R For fixed displcement pump nd seril connection RH For fixed displcement pump nd seril connection High flow ressure djustment in r 100 Mx 100 r 420 Mx 420 r ort connections & thred in S S & thred in SE OR SE Flnges comi options C Comi inlet V-22/16 type - 22 K - S 420 - O - - nti sturtion function S mplifier nti sturtion function / S mplifier comined - none Side options S O ump unloding function, normlly open C ump unloding function: normlly closed E prop pressure relief increse current, increse pressure F prop pressure relief increse current, decrese pressure - none cturtion 12 VDC 24 VDC H Mnul - none Oring type - UN N I VION H HNR Surfce tretment - none rotlloy 26
CONFIGURION CODE 22 K F N Q 1 - S H V W C S H E F J I H C D CONRO VVE R: SOO SECION Size 22 ild type Sndwich Suplte Compenstor With compenstor No compenstor Dummy lte 1 section Dummy plte 1/2 section Check vlve function none ody type Stndrd ody type high flow stndrd ody type (low Δ) 1,5 section wide ody type for esy mounting high flow 1,5 section wide ody type for esy mounting WIN ody type : 2 sections stndrd ody type Compenstor spring stndrd flow compenstor spring ow flow compenstor spring High flow compenstor spring Control ody Suitle for electric or hydrulic control 4/3 version Suitle for electric or hydrulic control 4/2 version for electric nd hydrulic control comined 1/4" S for electric nd hydrulic control comined SE OR 6 Mnul control For WIN ody only: Suitle for electric or hydrulic control, Comined (pilot) control Suitle for electric or hydrulic control, Dul (pilot) control 22 K F1 S H E M 24VDC F 24VDC with pin 12VDC E 12VDC with pin H 24VDC with II 2G Ex m II 4, flying leed O Hydrulic control 1/4" S Hydrulic control SE OR 6 only in comintion with mnul control (H) F spring returm friction rke R 3 position detent Connector type D - M ctuting type mp junior connector Deutsch connector** dditionl mnul control with E/O with control od E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,C,D E,F,C,D 27
CONFIGURION CODE C D G K O Q R CONRO VVE R: SOO SECION Min spool type ll ports locked in neutrl port locked in neutrl, port throttled to tnk (20%) & to tnk in neutrl (20% of nominl flow) port locked in neutrl, port throttled to tnk (20%) In neutrl position port + throttled flow to (20% ) In neutrl position ll ports locked, port lended In neutrl position ll ports locked, port lended For WIN ody only: WIN C spool, (C in 1st section, in 2nd section) WIN spool. (2 spools) C 2- / 2-1 2 3 4 5 6 7 - - x Mx. flow (l/min) (V-22) port / port 380 330, (660) for WIN 300 250, (500) for WIN 150 80 30, grooved spool only in comintion with mnul control none re-tension (optionl) none 20 r 28
CONFIGURION CODE CONRO VVE R: CONNECION OCK FY F / Z1 / Z1 - - ort connections hred in S S hred in SE OR code 61 SE 1" flnges C WIN connectionlock 1,5" S D WIN connectionlock SE OR E WIN connectionlock code 61 SE 1" flnge ** only on request Connection lock ody FY s/s + Y ports 1 For shock / suction Z1, 1,2,3 nd N1 with 'Y' port s/ included D1 for dump or Elec prop relief in common signl s s D2 for dump or Elec prop relief in s nd s - none S pressure setting rnge E nd < 100 r F nd > 100 r G > 100 r < 100 r H <100 r > 100 r Crtridge -sdie / side only with ody: Z1 shock suction /S 1 N1 suction /S 1 1 shock /S 1 XX dummy /S 1 ZC shock suction for WIN C1 NC suction for WIN C1 C shock for WIN C1 CRRIDGES NOG VERDER UI E REIDEN Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy 29
CONFIGURION CODE END E Size 22 22 ild type K Sndwich Suplte plte version H For mnul control only including 2 & 2 J For Electricl control including 2 & 2 C For use with comi inlet nd electric opertion vrints Z for S signl from other vlve ort connections hred in S S hred in SE OR SE flnges ie Rod kit ength 1--10,5 mount of sections (count V nd W sections for 1,5) Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy 16 K J Z 3 - - 30
31
MC Hydrulic Fluid ower V. Kuiperweg 33 9792 J en ost he Netherlnds.O. ox 18 9790 en oer he Netherlnds el.: +31 (0)50-3023577 Fx: +31(0)50-3021226 sles@mc-nl.com www.mc-nl.com