SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
|
|
- Matilda Gordon
- 5 years ago
- Views:
Transcription
1 SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility without mintenne. Multiple mounting nd porting options. Prepred for djustble indutive sensors. vilble upon request with FD H1 food grese. SGP-0S SGP-S SGP-3S SGP-0S SGP-0S SGP-S SGP-3S SGP-0S Prie $1.00 $1.00 $9.00 $30.00 Medium Pressure rnge Filtered ompressed ir, lubrited or non-lubrited 9-11 psi Temperture rnge 1-10 F Gripping fore on eh jw on opening t psi. lbf 11. lbf 1.1 lbf 1 lbf Totl gripping fore on opening t psi 10. lbf 3. lbf 30. lbf 3 lbf Gripping fore on eh jw on losing t psi. lbf 10. lbf 13. lbf 1. lbf Totl gripping fore on losing t psi 9 lbf 1. lbf lbf 3. lbf Totl stroke ±0.011'' (±0.3 mm) 0.1'' ( mm) 0.3'' ( mm) 0.31'' ( mm) 0.'' (1 mm) Mximum operting frequeny 3 Hz 3 Hz 3 Hz 3 Hz ir onsumption per yle 0.03 in in in 3 0. in 3 losing time without lod 0.01 s 0.01 s 0.0 s 0.0 s Repetition ury 0.000'' (0.0 mm) 0.000'' (0.0 mm) 0.000'' (0.0 mm) 0.000'' (0.0 mm) Weight 0.03 lb (33g) 0.09 lb (3g) 0.19 lb (g) 0.3 lb (10g) 3 01/01
2 by SGP-S SENSORS The operting position is deteted by two indutive sensors S1 nd S, (optionl) through the srew heds T1 nd T pled on the right jw. Fully losed gripper Fully open gripper S1 S T1 T The sensing position of the sensors n be djusted in the following wy: the plsti sper, (D) must be shortened ording to the djustment. The seond sper, (E) must be instlled if the gripper is used to grip prts from the inside. Prt# Prie GSG-IS-NPN NPN m ble $.0 GSG-IS-PNP PNP m ble $.0 E D D E Use 3mm dimeter indutive sensors on the SGP-0S nd mm dimeter on the other sizes. 01/01 S SGP-0S SGP-S SGP-3S SGP-0S S Ø3mm Ømm Ømm Ømm 39
3 SGP-S DIMENSIONS (mm) SGP-0S 1 ± Hole for indutive sensor Ø3 () M.xmm (No. ) ØHxmm Set for entering sleeves Ø3H11x3.mm Mounting thru hole Stroke of eh jw 1 0 OPEN 1 LOSED ± ±0.0 R 01/ RG.RO-13-S1 Stright fitting R1 Ø1.Hx3.mm () M.xmm ±0.0 Ø1.Hx3mm 1. ± ompressed ir in : gripper opening ompressed ir in : gripper losing RG.RO-13-S djustble fitting 1. mx. 1. mx. 0
4 by SGP-S DIMENSIONS (mm) SGP-S Hole for indutive sensor Ø () xmm () ØHx.mm Set for entering sleeves Ø3H11xmm Mounting thru hole 1 Stroke of eh jw 0 ±0.0 1 OPEN 19LOSED ±0.0 3 ± / RG.RO-13-S1 Stright fitting Ø1.Hxmm () xmm R1 R. ØHxmm ompressed ir in : gripper opening 3.. ompressed ir in : gripper opening RG.RO-13-S djustble fitting 1 ±0.0 ompressed ir in : gripper losing ompressed ir in : gripper losing. 10 ± mx.. mx. 1
5 SGP-S DIMENSIONS (mm) SGP-3S Hole for indutive sensor Ø () Mx.mm () ØHx.9mm Set for entering sleeves.3 ØH11xmm Mounting thru hole Stroke of eh jw ±0.0 3 OPEN LOSED ±0.0 01/ ± ØHxmm () xmm R R. ØHxmm ompressed ir in : gripper opening 19 ±0.0 ± M ompressed ir in : gripper opening ompressed ir in : gripper losing M ompressed ir in : gripper losing mx. 30 mx.
6 by SGP-S DIMENSIONS (mm) SGP-0S Hole for indutive sensor Ø () Mx9.mm () ØHx.9mm Set for entering sleeves ØH11xmm Mounting thru hole 3 ±0.0 Stroke of eh jw 0 OPEN LOSED ±0.0 01/ ± Ø.Hxmm () xmm R30 R. Ø.Hxmm ompressed ir in : gripper opening 1 ± M ompressed ir in : gripper opening ompressed ir in : gripper losing 3. ±0.0 M ompressed ir in : gripper losing 31 mx. 3. mx. 3
7 SGP-S MOUNTING THE GRIPPER The gripper n be mounted to stti or moving prt. When on moving prt, ttention must be pid to the inertil fore whih the gripper nd its lod re subjeted to. 1- To mount the gripper on the side, use () bolts through the mounting plte nd thred them into the holes of the gripper. The mounting holes n be found on both sides nd the dowel pin holes re one side only. - To mount the gripper from the bottom, use () bolts through the mounting plte nd thred them into the holes. Use the () supplied entering sleeves (H) for lignment into the dowel pin holes 3. 1 H 3 01/01
8 by SGP-S MOUNTING THE GRIPPER FINGERS The fingers must be s short nd light s possible. Mount them with bolt through the hole of the jw nd thred into the finger, (G). For preise positioning of the fingers on the jws, use the librted dimension (F), or the dowel pin holes. G G F F SGP-0S SGP-S SGP-3S SGP-0S M.x mm x mm x mm x mm M.x mm x mm Mx. mm Mx9. mm H Øh x Ø. x mm Øh x Ø3. x. mm Øh x Ø. x.3 mm Øh x Ø. x.3 mm Ø3H11 x 3. mm Ø3H11 x mm ØH11 x mm ØH11 x mm G M M F mm mm mm mm 3 ØH x mm ØH x. mm ØH x.9 mm ØH x.9 mm Ø1.H x 3 mm ØH x mm ØH x mm Ø.H x mm Ø1.H x 3. mm Ø1.H x mm ØH x mm Ø.H x mm 01/01
9 SGP-S GRIPPING FORE The grphs show the verge gripping fore on eh jw, s funtion of the operting pressure, of the gripper finger length Z nd of the overhnging X. The fore shown in these grphs refers to one jw. GRIPPING FORE N x 0. = lbf The totl fore is double. PRESSURE br x 1. = psi SGP-0S opening losing opening ( psi) losing ( psi) Gripping Fore Gripping Fore Gripping Fore SGP-S SGP-3S opening opening losing losing opening ( psi) opening ( psi) losing ( psi) SGP-0S opening losing 01/01 losing ( psi) opening ( psi) losing ( psi) Gripping Fore Gripping Fore Gripping Fore Gripping Fore Gripping Fore
10 by SGP-S SFETY LODS hek the tble for mximum permitted lods. Exessive fores or torques n dmge the gripper, use mlfuntions nd endnger the sfety of the opertor. F s, Mx s, My s, Mz s, re the mximum permitted lods under stti onditions, tht is when the jws re motionless. F d, Mx d, My d, Mz d, re the mximum permitted lods under dynmi onditions, tht is when the jws re moving. The mximum permitted weight mss (m) on eh gripper finger s funtion of the losing or opening time is lso shown. Use flow ontrollers (not supplied) to hieve the desired speed. F My Mx Mz SGP-0S SGP-S SGP-3S SGP-0S F s 30 N 0 N 0 N 10 N Mx s 1 Nm Nm Nm Nm My s 1 Nm Nm Nm Nm Mz s 1 Nm Nm Nm Nm F d 0.3 N 0. N 0. N 1. N Mx d 1 Nm Nm Nm Nm My d 1 Nm Nm Nm Nm Mz d 1 Nm Nm Nm Nm m 0.s 30 g 0 g 0 g 10 g m 0.0s 10 g 0 g 30 g 0 g m 0.0s g 1 g 0 g - m 0.01s g 10 g /01
11 SGP-S GRIPPING The gripper is double ting nd n be used for either internl () or externl (B) gripping pplitions. The gripping fore is higher on opening thn on losing. Pressurized hmber 01/01
12 by SGP-S PIPING THE UNIT The gripper is pressurized from the side ports ( nd ) using proper fittings nd tubing (not supplied). lterntively, it n be pressurized diretly through the lower holes ( nd ) (exept SGP-0S) fter removing the plugs. ompressed ir in or : gripper opening. ompressed ir in or : gripper losing. The ompressed ir must be filtered using to 0 miron filter. The initil hoie on ir lubrition (lubrited or not) must be kept for the entire servie life of the gripper. The pneumti iruit must be pressurized progressively to void unontrolled movements. O-Ring O-Ring set Ø1.x.90 Ø.3H11x PNEUMTI IRUIT Possible problems on ompressed ir iruit: 1- Pressure vritions. - Pressurizing the empty gripper t strt-up. 3- Sudden lk of pressure. - Exessive drive speed. Possible solutions to the bove issues: 1- Externl ompressed ir storge (). - Strt-up vlve (B). 3- Sfety vlves (). - Flow ontrollers (D). 01/01 9
13 SGP-S UTION Never let the gripper ome into ontt with orrosive substnes, powders, or soldering or welding sptter s they will dmge the gripper. Never let non-uthorized persons or objets be within the operting rnge of the gripper. Never operte the gripper on mhine tht does not omply with the sfety stndrds nd lws of your ountry. MINTENNE The gripper must be lubrited every twenty million yles using the following produts: BERULUB FG-H EP (Lubrint NSF H1 Registrtion No. 10). The jw bklsh s shown below, is set t the ftory. NEVER USE THE DJUSTING SREWS TO MODIFY IT. Mx 0.0mm Mx 0.0mm 0 01/01
14 by SGP-S PRTS LIST 01/01 SGP-0S SGP-S SGP-3S SGP-0S 1 Gripper housing SGP-0-01 SGP--01 SGP-3-01 SGP Jw holder SGP-0-0 SGP--0 SGP-3-0 SGP Left jw SGP-0-03 SGP--03 SGP-3-03 SGP Piston SGP-0-0 SGP--0 SGP-3-0 SGP-0-0 Speil bolt SGP-0-0 SGP--0 SGP-3-0 SGP-0-0 Hed SGP-0-0 SGP--0 SGP-3-0 SGP-0-0 Sensor guide SGP-0-0 SGP--0 SGP--0 SGP--0 Protetion SGP-0-0 SGP--0 SGP-3-0 SGP Lever PR-10- SP-0- SP-- SGP O-RING Ø1.x3.9 (GUR-0) Ø1.x. (GUR-09) Ø1.x.0 (GUR-039) Ø1.x. (GUR-01) Dynmi gsket Ø1.x. (GUR-0) 1x9x. (GUR-00P) Ø1.x1 (GUR-00) 0x13x. (GUR-00P) 11 1 O-RING Ø1x9 (GUR-1) Ø1x1 (GUR-0) Ø1.x1 (GUR-00) Ø1.x1.1 (GUR-0) 1 13 Elsti wsher - Ø. DIN1 Ø3. DIN1 Ø3. DIN Dowel pin Ø.xmm DIN3 Ø.x3mm DIN3 Ø3x0mm DIN3 Ø3x0mm DIN3 1 1 Dowel pin - Øxmm DIN3 Ø.xmm DIN3 Ø.x11. mm DIN0 1 1 Bolt M1.xmm DIN9 Mxmm DIN9 INOX Mxmm DIN9 INOX Mx mm DIN9 INOX 1 1 Hex nut - M DIN93 INOX DIN93 INOX DIN93 INOX 1 1 Bolt Mx1mm DIN9 INOX M.x1mm DIN91 INOX M.x1mm DIN91 INOX x0mm DIN91 INOX 1 19 Grub srew - x3mm DIN913 x3 mm DIN913 x3 mm DIN Bushing SGP-0-09 SGP--09 SGP-3-09 SGP O-RING - - Ø1x1 (GUR-0) - 1 Dowel pin Øx.3mm DIN3 Øxmm DIN3 Ø.xmm DIN3 Ø.xmm DIN3 3 Right jw SGP-0S-01 SGP-S-01 SGP-3S-01 SGP-0S-01 3 Sper SGP-0-10 UG-1-09 UG-1-09 SGP-0S-0 Sper SGP-0-11 UG-1-11 UG-1-11 SGP-0S-03 Bolt M1.x3mm DIN9 Mxmm DIN9 INOX Mxmm DIN9 INOX Mxmm DIN9 INOX Bolt M1.xmm DIN9 Mxmm DIN9 INOX Mxmm DIN9 INOX Mx1mm DIN9 INOX Bolt M1.xmm DIN9 Mx10mm DIN9 INOX Mx10mm DIN9 INOX Mx10mm DIN9 INOX 1
Filtered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20.
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES ) Double-acting. High gripping force at the end of the stroke. Maintenance-free long life and reliability. Various options for fastening. Optional
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES SZ)
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES ) Double-acting. Spring closed (upon request). Patented self-centering system. Multiple mounting and porting options. Optional magnetic sensors.
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES HS)
HS 2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES HS) Designed for high-speed machines. Very short closing/opening times. Lightweight. Maintenance-free long life and reliability. Long stroke.
More information2-jaw self-centering pneumatic parallel gripper (series SX)
SX 2-jaw self-centering pneumatic parallel gripper (series SX) Double acting (normally closed on request). High gripping force. Protection class: IP67. Double O-Ring sealing on the columns. Suitable for
More informationGX-S. 2-jaw self centering radial pneumatic gripper (series GX-S) GX-S
GX-S 2-jaw self centering radial pneumatic gripper (series GX-S) Double acting. Very high gripping force at the end of the stroke. Long life and reliability, maintenance free. Various options for fastening.
More informationDouble Acting Models Part# GW-10 GW-16 GW-20 GW-25 Quick# Price $95.00 $ $ $ Medium
11: Double acting Long life and reliability, maintenance free. Different options for fastening. Optional proximity magnetic sensors available on page 527. Spring closed (-NC) or spring open (-NO) option.
More informationHybrid Relief Valves
Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,
More informationPRP. Pneumatic parallel gripper with rotator PRP
PRP Pneumatic parallel gripper with rotator Compatible with the G-mix system. Selectable rotation angle. Gripper with integrated rotator: the four sensors and the four hoses do not rotate. Optional magnetic
More informationGS - Parallel Gripper
11: Double acting Patented backlash adjusting system. Long life and reliability, maintenance free. Different options for fastening. Optional magnetic sensors available on page 517. Spring closed (-NC)
More informationConnectors according to DIN / IEC
E L E C T R O N I C C O N N E C T O R S Connetors ording to DIN 41612 / IEC 60603-2 56 ept GmH I Tel. +49 (0) 88 61 / 25 01 0 I Fx +49 (0) 88 61 / 55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationINSTALLATION INSTRUCTIONS AND USER MANUAL FOR SLOAN EAF GOOSENECK SERIES FAUCETS
ode No: 0816409 Rev. 1 (07/11) INSTLLTION INSTRUTIONS ND USER MNUL FOR SLON EF GOOSENEK SERIES FUETS EF-700 Powered, Sensor ctivated Electronic Gooseneck Hand Washing Faucets EF-750 attery Powered, Sensor
More informationBypass Compensator Cartridge, Size 16
Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,
More informationSingle and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
More information10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7
SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting
More informationSeries CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
More informationMPRM1690 MPRM2590 MPRM3290
Pinze elettriche radiali a 2 griffe 2-jaw radial electric grippers MPRM 2-jaw radial self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged.
More informationPROPORTIONAL PRECISION PRESSURE REGULATOR REGTRONIC SERIES
PROPORTIONL PREISION PRESSURE REGULTOR REGTRONI SERIES Proportional pressure regulators series REGTRONI have the job of precisely regulating the pressure in a system, the variables depending on the input
More informationWorkrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters
Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped
More informationLesson 2 PRACTICE PROBLEMS Using Trigonometry in Any Triangle
Nme: Unit 6 Trigonometri Methods Lesson 2 PRTIE PROLEMS Using Trigonometry in ny Tringle I n utilize the Lw of Sines nd the Lw of osines to solve prolems involving indiret mesurement in non-right tringles.
More informationOur all-rounder stands out for its superb precision and durability. Central clamping of workpiece for conventional clamping and clamping of
124 Allmti CENTRO GRIPP FOR CENTRAL GRIPPING Our ll-rounder stnds out for its super preision nd durility. Centrl lmping of workpiee for onventionl lmping nd lmping of unmined prts. Idel for 5-sided mining.
More informationTHERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS
THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS
More informationGebrauchs- und Montageanleitung Operating and installation instructions. Instrucciones de uso y montaje. Instrucţiuni de montaj şi utilizare
Geruhs- und Montgenleitung Operting nd instlltion instrutions GEBRUIKS- EN INSTALLATIEVOORSCHRIFTEN Instruiones de uso y montje Instrukj osługi i montżu Инструкция ПО ЭКСПЛУАТАЦИИ И МОНТАЖУ Instruţiuni
More informationHeavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
More informationReproduction. Not for. Mower - Roller Bar WARNING. Installation and Leveling Instructions. Attention Setup Personnel: Model: ,
Mower - Roller Br Instlltion nd Leveling Instructions 4 Model: 9555, 9594 Attention Setup Personnel: 5 4 5 Model: 958, 9595 Model: 9559 Model: 959 The sfety wrnings provided in this guide nd in the trctor's
More informationPressure reducing valves (with check valve) X(C)G, XGL
Pressure reducing vlves (with check vlve) X()G, XGL 3- Pressure ontrol Vlves unctionl Symbols XG XGL X XG X Vlve is used to set pressure in brnch circuit lower thn pressure of the circuit. y connecting
More informationCooling System. Table of Contents. Section 6A - All Models. All Models
Cooling System All Models Tle of Contents Setion 6A - All Models Flow Speifitions...6A-3 Sewter Inlet Speifitions...6A-4 Generl Informtion...6A-4 Sewter Pump Identifition...6A-4 Sewter Inlet Hose...6A-5
More informationThe Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method
Exercise 6-3 Level Process Control EXERCISE OBJECTIVE In this exercise, you will perform PID control of level process. You will use the open-loop step response method to tune the controller. DISCUSSION
More informationPWG-S. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 5.98 Nm Nm. Weight 0.21 kg 1.
PWG-S Sizes 40 80 Weight 0.21 kg 1.2 kg Gripping moment 5.98 Nm 50.82 Nm Angle per jaw 20 Workpiece weight 1.1 kg 4.8 kg Application example Rotating/gripping combination for flexible handling of sheet
More informationS5 HAB/HAD SEAT Abductor / Adductor
Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR
More informationDescription Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg
Overview parallel gripper Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg Version 1 2 1 2 1 2 RRP-A 64 12 6 240 450 1,2 2,2 26 80 16 8 380 700 1.9 3.5
More informationGWB Pneumatic 2-Finger Radial Gripper Universal Gripper Sizes Weight Gripping moment Opening angle per finger Workpiece weight
GWB Sizes 34.. 100 Weight 0.14 kg.. 3.5 kg Gripping moment 2.1 Nm.. 127 Nm Opening angle per finger 10.. 90 Workpiece weight 0.3 kg.. 6.0 kg Application example Rotating/gripping combination for handling
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More information400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L
User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: www.ergotron.om 1 of 10 Hzrd Symols Review These symols lert
More informationAT200 INSTALLATION MANUAL
ENGLISH AT200 INSTALLATION MANUAL D29020CS416-XXX - SEAT & BOWL COMBINATION-CWH D23020CS11S-XXX - BOWL-CWH D28000AS416-XXX - SEAT / BODY UNIT-CWH Cnvs White (415) Tle of Contents 1. Oserve Listed Preutions
More informationCash Valve CRYOGENIC CONTROLS. ISSUED - FEBRUARY 2000 CAVMC-0514-US-0208 ISO 9001 Certified
ash Valve RYOGENI ONTROLS ISSUED - FERURY 2000 VM-0514-US-0208 ISO 9001 ertified RYOGENI ONTROLS WORD OUT RYOGENIS... ryogenics the science of materials at extremely low temperatures has become more and
More informationFlow Divider / Combiner Cartridge Valves
Flow Divier / Cominer Vlves Type Pge Divie Only 9 Divier / Cominer, Close Centre 95 Synhronizing Divier / Cominer 96 Divier / Cominer, Close Centre, High 97 Int l Shortut Ctlogue #999-901-1 9 Flow Divier
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationSeries CGCN self-centering three-jaw grippers with T-guide
HANDLING AND VACUUM 2019 GRIPPERS > Series CGCN self-centering three-jaw grippers with T-guide New Double acting, magnetic Sizes: 50, 64, 80, 100, 125 mm The new Series CGCN pneumatic grippers are available
More informationHD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING
FLOT SWITH DN50 upv PRESSURE FOR SENSOR TUING ( OVER) REFER TO 4 ND FLOT SWITH (50%) DN80 upv SUTION (600 OVER) GRVITY SEWER MINS FLL TOWRDS SUMP REFER TO NOTE 9 PLN (OVERS REMOVED) SLIDE GTE VLVE ± HMER
More informationVENTS SERIES DOMESTIC ELECTRIC FANS. User s Manual
VENTS SERIES OMESTIC ELECTRIC FANS User s Mnul 008 ESIGNATION BASIC SPECIFICATIONS "VENTS" fns re designed for ventiltion of domesti nd similr premises (prtments, offies, stores, grges, kithens, throoms,
More informationCheck Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
More informationW60 Spool & Sleeve Valves for ISO Bases (5599/I)
W60 Spool & Sleeve Valves for ases (59/I) 5/ Valves Single Solenoid Pilot Spring Return,7,,6 W60760 W6076 W60760 W6076 W60760 W6076 W6070 W607 * ase and electrical connector not included. 5/ Valves Double
More informationPENTAIR/PAC FAB HI-FLOW, 2" PENTAIR/PAC FAB 2" PVC SLIDE VALVE
PENTIR/PC F HI-FLOW, " MODELS 0, 00, E-0 COMPLETE HI FLOW VLVE, 0 NO PLUMING -0 COMPLETE VLVE W/ PLUMING 00 SND FILTER VERSION 00- COMPLETE VLVE W/ PLUMING DE -0 HNDLE, VLVE 0-0 SCREW, HNDLE S.S 0-0 WSHER,
More informationCENTRIFUGAL AERATION FANS
CENTRIFUGL ERTION S LIFTING LUGS OR RINGS ON LL SIZES. NOTES: 1. LL DIMENSIONS RE IN INCHES. 2. ROTTIONS RE CW (CLOCKWISE) OR CCW (COUNTER CLOCKWISE). 3. OUTLET CN BE POSITIONED S UP-BLST, DOWN-BLST, TOP-HORIZ.,
More informationLesson 8: Application Technology
The type of ppliction equipment used must suit the type of ppliction. In this module, you ll lern the prts of the most common types of ppliction equipment used by ssistnt pplictors, s well s how to properly
More informationSUN WP INDUSTRIAL VALVES INDUSTRIAL VALVES 2-PIECE BALL VALVE FULL BORE. STANDARD PART NUMBERS Art female/female. Art.
INDUSTRI VVES SUN WP PIEE VVE FU ORE UNI EN ISO : ertificato n / MIN STNDRD FETURES ONSTRUTION: ISI ERTIFITIONS: DVGW for gas TÜV for T uft DIMETER: from DN /" to DN " PRESSURES: from R to R TEMPERTURE
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum
More informationNON-TRAP PARASITIC ELEMENTS ELEMENT P-10 10M Reflector 39 10m Rear Driver 28 10M Front Driver 28 10M Director 24
C B REINFORCEMENT TYPE P (SEE DWG. 140009) 36" P-10 COMPONENTS, DIMENSIONS: PRSITIC ELEMENTS REINFORCEMENT TYPE BE (SEE DWG.) B REINFORCEMENT TYPE BC SSY 140019 COMPONENTS, TRP SSEMBLY SLOT WITH SINGLE
More informationPFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
More informationKRYPTON X ROAD : ASSEMBLY GUIDE
KRYPTON X ROAD : ASSEMBLY GUIDE Revision 3.0-06-01-2016 KRYPTON X ROAD : Table of contents Assembly overview.........................2 1. Frame inspection........................3 2. Headset installation.......................4
More informationPneumatic Grippers Swivel Modules
Pneumatic Grippers Swivel Modules Pneumatic Grippers Swivel Modules ROTARY GRIPPERS MODULES Series Size Page GSM 748 Parallel Grippers GSM-P 750 GSM-P 32 754 GSM-P 40 760 GSM-P 50 766 GSM-P 64 772 Centric
More informationLGR. Application example. Pneumatic 2-Finger Radial Gripper Universal Gripper. Sizes. Gripping moment 0.3 Nm 15 Nm. Weight 0.07 kg 1.
LGR Sizes 10 40 Weight 0.07 kg 1.27 kg Gripping moment 0.3 Nm 15 Nm Angle per jaw 90 Workpiece weight 0.07 kg 1066 kg Application example Rotational adjustment for reorientation of workpieces 2-Finger
More informationLGZ. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes. Gripping force 120 N 1470 N. Weight 0.1 kg 0.
LGZ Sizes 16 5 Weight.1 kg.99 kg 12 N 147 N Stroke per finger 3 mm 7 mm Workpiece weight.6 kg 5.7 kg Application example Pneumatic transfer unit for round components 3-Finger Centric Gripper LGZ Linear
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: with stroke compensation with clamping spigot with flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable
More informationBulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves
Service Bulletin Series PR25MA, PR25P, PR25S, PR32P, PR32S Effective: July 1, 1995 Pilot Operated Pressure Reducing Valves WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
More informationML OXIPRES INSTRUCTION MANUAL
ML OXIPRES INSTRUCTION MNUL Version 2018.02.01 xel Kiers Vej 34-8270 Højbjerg - Denmark MIKROL RHUS /S Tlph: +45 86 29 61 11 - Fax: +45 86 29 61 22 - E-mail: ml@mikrolab.dk INDEX WRNING... page 2 DESCRIPTION...
More information(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type
These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can
More informationPRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set
More informationHot-Air Blowers 12 / / Hot-Air Blowers
Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17
More informationDirectional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationRCP5W-RA Series. www. r o b o c y lind e r. d e. Dust-/Splash-/Water-proof RoboCylinder Rod Type with Battery-less Absolute Encoder
Product Data Sheets RCPW-RA RoboCylinder Brochure Extract GB Dust-/Splash-/Water-proof RoboCylinder Rod with Battery-less Absolute Encoder RCPW-RA Series www. r o b o c y lind e r. d e Specification Table
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationFino Installation Instructions
Fino nstlltion nstrutions #1500154- Rev C Fino nstlltion nstrutions A Light Fixture Trnsformer Qty: 0 or 1 1 C Prts Rotting Mgneti Mounts Qty: 3 or 6 2 D Fixe Mgneti Mounts Qty: 4 or 8 2 E Rotting Woo
More informationINSTALLATION INSTRUCTIONS FOR ELECTRONIC SENSOR ACTIVATED LAVATORY FAUCETS
ode No. 08165 Rev. 1a (11/06) INSTLLTION INSTRUTIONS FOR ELETRONI SENSOR TIVTED LVTORY FUETS EF-100 Series Transformer Powered Sensor ctivated Lavatory Faucets EF-150 Series attery Powered Sensor ctivated
More informationHERMETIC COMPRESSOR ACCESSORIES
ROTOSEL STRIGHT MLE DPTORS PRT NUMER SIGNIFINE 99 M 66 28 22 SERVIE PRT SERVIE I.D. # 28/16 = 1-3/4 @ 22/16 = 1-3/8 @ MLE DPTOR SWET P36 NOTE: Items this page limited to stock available then N.L.. P/N
More informationPneumatic Gripping Modules. Pneumatic 2-Finger Radial Grippers
Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers 2-FINGER RADIAL GRIPPERS Series Size Page Universal Grippers GWB 676 GWB 34 680
More informationpge 2 Owner's Mnul for Thern 4WS nd 4HS Series Power Winhes Two-Yer Limited Wrrnty Plese reord the following: Dte Purhsed: Model No.: Seril No.: This
Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re ple ments re vil le from Thern, In. IMPORTANT: Plese reord produt informtion on pge 2.
More informationENGINEERING DATA. PVB Piston Pumps. w w w. F l u i D y n e F P. c o m Same Day Shipments of Units or Part Orders
ENGINEERING DT PV Piston Pumps Same Day Shipments of Units or Part Orders Interchangeable Parts Fully Tested w w w. F l u i D y n e F P. c o m Email:cs@FluiDyneFP.com Contents asic characteristics.........................................................................................
More informationRobot Control User Manual /0718-V01
Root Control User Mnul 0021919/0718-V01 2 CONTENT 1. INTRODUCTION... 4 2. PROGRAM DESCRIPTION... 4 3. SKR CONNECTION... 5 4. PROGRAM INSTALLATION... 6 5. DRIVER INSTALLATION... 6 6. MAIN SCREEN... 7 7.
More informationDIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIL PRESSURE REGULTING VLVE zon Body material pressure diameter Max. temperature Grey cast iron DN 120 according to the pressure equipment directive 2014/68/UE E marking for DN 065 FETURES compact
More informationMPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
More informationJOHNSTON COUNTY DEPARTMENT OF UTILITIES DUCHESS DOWNS FORCE MAIN IMPROVMENTS OCTOBER 2017
DEPRTMENT OF UTILITIES FORE MIN IMPROVMENTS OTOER 2017 Owner: Johnston ounty ORD OF OMMISSIRS Jeffrey P. arver - hairman Ted G. Godwin - Vice hairman ookie Pope llen L. Mims, Jr. had M. Stewart Keith ranch
More informationSo Chic Dollhouse. Assembly Instructions Item #65078
Please retain this information for future reference So hic Dollhouse ssembly Instructions Item #65078 To order replacement parts, please visit UTION: dult assembly required. Hardware contains small screws
More informationSpare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
More informationG R I P P E R S English edition 10/2012
GRIPPERS English edition 10/2012 76 GRIPPERS CONTENTS PRECISION PARALLEL GRIPPERS 78-93 PRECISION PARALLEL MINI GRIPPERS 96 109 UNIVERSAL PARALLEL GRIPPERS 112 121 LONG-STROKE GRIPPERS 122 131 77 UNIVERSAL
More information3 & 4-Way Mixing & Diverting Valves
Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The
More informationGeneral Technical Data and Calculations
18 Bosh Rexroth AG R31EN 232 (26.4) General Produt Desription General Tehnial Data and Calulations Fores and load moments In Rexroth the running traks are arranged at a ompression angle of 45. This results
More informationpneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 24.06.2016 www.kaercher.com EN Page 2 / 51 Page 3 / 51 Page 4 / 51 Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0)
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More informationPrestomatic Air Brake Push-In Fittings
Ctog 3501E Prestomtic Air rke Push-In Fittings Mteris of Construction Fitting odies: Coet: Tube support: O-ring: rss rss Stiness Stee un omencture Exmpe: 68pmt-6-4 Attribute: 68 Me Connector pmt Air rke
More informationEfficacy of Selected Insecticides Against Phormium Mealybugs on New. Zealand Flax, Phormium tenax.
1 Effiy of Seleted Insetiides Aginst Phormium Melyugs on New Zelnd Flx, Phormium tenx. Phormium tenx v. Dzler Jmes A. Bethke Pest Teh West 34920 Ornge St. Wildomr, CA. 92595 (951)-775-7172 ethkeugmn@erthlink.net
More informationSeries 10-IRV10/20. Vacuum Regulator C08 IRV C08 IRV 20 A. How to Order. Standard connections. Single sided connections. Accessory w Nil G ZN ZP ZA ZB
Vacuum egulator eries -IV/ How to Order tandard connections IV C08 traight Clean series ody size Max. flow 140 L/min (N) Max. flow 240 L/min (N) L Fittings traight Connection tubing O.D. ymbol ubing O.D.
More informationLeak free Pipe Rupture Valve for Excavators
Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 20.04.2016 www.kaercher.com EN Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0) 10 Housing 20 Pump set 21
More informationDJ PUMP MARINE PRODUCTS 1
w w w. dj i m t e ch. c o m MRINE PRODUTS MRINE PRODUTS ISO 900:00 SPEILIST RETING FUTURE Y TEHNOLOGIL INNOVTION (Dong Jin International Marine Tech. ompany) For the past thirty years, Dong Jin International
More informationDPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes
DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small
More informationINFORMATION SHEET: SERIES GRC PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRC PARALLEL S IMPORTANT INFORMATION DO NOT DISCARD! Use this formation sheet to assist with gripper stallation and setup. File with matenance or mache documentation. TO ORDER
More informationBores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
More informationTL VISUAL LEVEL C/C DISTANCE MM
VISUL LEVEL The visual level gauges allow the liquid level to be checked in a clear and precise way at any time, in addition to the possibility of having electric signals. 8 TL VISUL LEVEL / DISTNE 76-27-254
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and Position.
027R9789 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and Position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM 027R9789 Fig.
More informationLGP. Application example. Pneumatic 2-Finger Parallel Gripper Universal Gripper. Sizes. Gripping force 26 N 1090 N. Weight 0.03 kg 1.
LGP Sizes 8 4 Weight.3 kg 1.6 kg 26 N 19 N Stroke per finger 2 mm 13 mm Workpiece weight.13 kg 4.2 kg Application example Pneumatic double transfer unit 2-Finger Parallel Gripper LGP Universal Rotary Actuator
More informationReliability and flexibility in a compact design
Catalogue Handling Reliability and flexibility in a compact design Modern industrial processes are now characterized by an ever increasing amount of automation. Where very high performance is required,
More informationSpare parts list ( ) Spare parts list HD 1.8/13 C Ed
Spare parts list (5.972-842.0) Spare parts list HD 1.8/13 C Ed 26.05.2015 www.kaercher.com EN Table of contents Spare parts list HD 1.8/13 C Ed (5.972-842.0)... 6 10 Housing... 7 11 Housing... 8 12 Hand
More informationBUL: 3-way unit valve, PN 16
Produt data sheet 55.009 BU: 3-way unit valve, PN 16 Improving energy effiieny inear mixture and no loss through leakage in the ontrol passage for energy-effiient regulation Features Flat-sealing standard
More informationVB-7253 Series. Application. Features. Applicable Literature
VB-7253 Series 1/2 to 2 Screwed NPT Stinless Steel Trim with Teflon Disc Stem Up Open, Two-Wy Vlves Generl Instructions Appliction VB-7253 series single set, stem down to close, two wy vlves control wter
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More information