SO 9001 I ACCESSORIES
|
|
- Andrew Dalton
- 5 years ago
- Views:
Transcription
1 ISO 9001 ESSORIES
2 ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
3 IN-LINE MOUNTED FLOW ONTROL VLVES DESIGN FETURES llows free flow of air in one direction and adjustable flow in the opposite direction. Piped between valve and cylinder. High flow, accurate adjustment. Tamper proof locking screw standard. Self-cleansing poppet eliminates sediment accumulation. S ND DIMENSIONL INFORMTION PORT MS2 MS3 3/ 2 v (l/min) 1.6 (130) 1.6 ( (260) Kg (L),23 (.50),23 (.50) Top -, ottom - inches 73, ,2 2. 1,2.56 1,2.56 5, , ESSORIES MS7 3/ 1.90 (20) 5.00 (920) ,56 (1.25) , (12990) MS (1960) ,1 (.00) , (16730) IN-LINE MOUNTED HEK VLVES DESIGN FETURES llows low cracking pressure and full area free flow of air in one direction and instantaneous shut-off in the reverse direction. Self-cleansing poppet eliminates sediment accumulation. S ND DIMENSIONL INFORMTION PORT v (l/min) 2.3 (230) RKING PRESSURE Kg (L) Top -, ottom - inches M3 3/ 2.71 (2670).50 PSIG 203-3,23 (.50) 73,2 2. 1, , (350) M7 3/ (5210) 6.00 (5900) 15.0 (15550) 6.75 PSIG ,56 (1.25) , , M (910) 3.00 PSIG ,63 (3.62) , (00)
4 ESSORIES QUIK EXHUST, HEK ND SHUTTLE VLVES DESIGN FETURES One model does all three functions. Rugged internal construction outlasts and out performs competition. Quick Exhaust Valve: When IN is pressurized, flow is from IN to OUT with EXH blocked. When OUT is pressurized, flow is from OUT to EXH with IN blocked. heck Valve: Free flow from IN to OUT with EXH plugged. No flow from OUT to IN with EXH plugged. Shuttle Valve: When IN is pressurized, flow is from IN to OUT with EXH blocked. When EXH is pressurized, flow is from EXH to OUT with IN blocked. PORT NPTF IN, OUT EXH MQ1 MQ2 MQ3 MQ7 3/ 3/ 3/ 2 3/ 3/ 3/ S v (l/min).1 (100).72 (790).97 (90) 1. (0) 1. ( (2560).1 (250) MIN PRESSURE PSIG (R) MX 3 (.2) 125 (.5) (.3) 150 (10.7) 3 (.2) 150 (10.7) (.1) (.1) 150 (10.7) Kg (L),01 (.02),0 (.),07 (.16),1 (.31),29 (.63),5 (.99),1 (.90) MQ2, MQ3, MQ7 QUIK EXHUST HEK D SHUTTLE E DIMENSIONL INFORMTION MQ1 OUT D E E D IN EXH IN MQ MQ2 MQ3 MQ , , , , ,1.3 2, ,5.1 31, , ,9 1. 5, , , , , Units of Measure: Top -, ottom - inches
5 LOKOUT VLVES DESIGN FETURES 3 way 2 position valve. Short stroke for quick response. Padlockable in the closed position. right red handle for visibility. When handle is pulled outward, inlet port 1 is connected to outlet port 2 and exhaust port 3 is blocked. When handle is pushed inward, inlet port 1 is blocked and outlet port 2 is connected to exhaust port 3. These products are defined as energy isolation devices, NOT N EMERGENY STOP DEVIE. ESSORIES S 3/2 NO 2 PORT v (l/min) ODY MTERIL SEL MTERIL Kg (L) 1 3 DETENT N06 3 /.0 (390) N060HLM 1 /2.5 (30) N0605HLM LUMINUM NR,7 (1.5) 3 / 5.6 (5510) N0606HLM 3 / 13.0 (12790) N1606HLM N (130) N1607HLM LUMINUM NR 1,5 (3.3) (1570) N1609HLM TO DD SOFT STRT FETURE - DD SS TO THE DIMENSIONL INFORMTION N N
6 ESSORIES MUFFLERS PIPE v (l/min) WEIGHT g (OZ) HEX (IN) LENGTH (IN) DESIGN FETURES Reduces exhaust noise level in air systems. Maintains full volume air flow with minimum back pressure. Threads into exhaust port. EXHUST MUFFLER -1 1 / 1.30 (1160) 11 (.) 11,1 (7/16) 3,9 (1.3) -2 1 / 2.30 (2060) 20 (.7) 1,3 (9/16),5 (1.75) -3 3 /.90 (30) 37 (1),5 (1 16) 57,3 (2.25) -5 1 / (600) 57 (2),2 (7/) 69,0 (2.72) -7 3 / 1.00 (15520) 12 (5),5 (116) 0,3 (3.16) (16090) 7 () 20,6 (13/16) 9, (3.) (21100) 397 (1) 2,9 (1 116) 11 (.50) (370) 539 (19) 50, (2) 127 (5.00) Reduces exhaust noise level in air systems. Sintered bronze bonded to a copper plated male pipe fitting. orrosion resistant. leanable 0 micron filter element. D SINTERED EXHUST MUFFLER (150) - 6,3 (),6 (.3) D-1 1 /. 70 (630) 9 (.3) 11,1 (7/16) 2,6 (1.12) D-2 1 / 1.0 (1250) (.6) 1,3 (9/16) 3,9 (1.37) D-3 3 / 1.90 (00) 29 (1.0),5 (116) 3,1 (1.50) D-5 1 / (300) 0 (1.),2 (7/) 7,6 (1.) D-7 3 / 6.50 (510) 7 (2.6) 27,0 (1 16) 57,2 (2.25) D (9390) 13 (5.1) 33,3 (1 5/16) 73,0 (2.) Reduces exhaust noise level in air systems. llows adjustment of exhaust air flow to accurately control cylinder speeds. orrosion resistant. leanable 0 micron filter element. 266 EXHUST RESTRITOR/SINTERED MUFFLER / 1.20 (1070) 19, (0.7) 11,1 (7/16) 37,3 (1.7) / 1.30 (1160) 25,5 (0.9) 1,3 (9/16) 55,9 (2.20) / 2.00 (90) 39,7 (1.),5 (116) 63,0 (2.) / 2 3 /70 (3310) 7 (2.6),2 (7/) 5,1 (3.35) / 5.90 (5270) 1 (.3) 27,0 (1 16) 93,5 (3.6) (600) 292 (10.3) 33,3 (1 5/16) 126,2 (.97) 6
7 DESIGN FETURES Push-in plastic or soft metal tubing for instant connection; hold down insert for instant tubing release. llows leak-free, full flow operation with no internal restriction. rass contruction. Teflon sealant pre-applied to threads. Internal hex aids installation. FITTINGS PUSH-IN TUE FITTINGS THRED NPFT TUE OD - EXTERNL HEX STRIGHT INTERNL HEX LENGTH (IN) /16 3 /16 27,0 (1.06) /16 3 /16 27,0 (1.06) / 9/16 5 /16 32, (1.26) ESSORIES Push-in plastic or soft metal tubing for instant connection; hold down insert for instant tubing release. llows leak-free, full flow operation with no internal restriction. Teflon sealant pre-applied to threads. Threads into cylinder port for accurate speed control with lockable settings and push-in tube connection. llows full flow into cylinder and controlled flow out. rass and plastic contruction. Teflon sealant pre-applied to threads. PUSH-IN TUE FITTINGS - SWIVEL THRED NPFT TUE OD EXTERNL HEX ELOW HEIGHT (IN) LENGTH (IN) /32 1 / 2 20,7 (.1) 26,7 (1.05) / 2 26,5 (0) 2,7 (1.13) /16 26,5 (1.0) 33,7 (1.33) / 5 / 2,0 (1.10) 36,7 (1.5) FLOW ONTROL /16 63,0 (2.) 39, (1.55) / 66,3 (2.61) 39,0 (1.52) / 5 / 66,3 (2.61) 3,1 (1.70) / 3/ 7 / 72,0 (2.3) 52,6 (2.07) FITTINGS MLE THRED FEMLE THRED EXTERNL HEX LENGTH (IN) Threads into solenoid exhaust ports for external plumbing of solenoid exhaust. rass and plastic construction. MLE TO FEMLE / ,6 (1.13) / ,6 (1.13) M5 1 / 2 19,1 (.75) FEMLE TO FEMLE /,2 (.) /16 20,6 (.1) 7
8 ESSORIES Media: ompressed air or inert gas, lubricated or non-lubricated. Seals: NR Springs and odies: Stainless steel. Internals: rass and zinc plated brass. PNEUMTI ESSORIES Plastic Parts: P. Pressure Range: 100 kpa kpa [(15 psi psi), (1 R - 10 R)]. Note: soft start = 310 kpa kpa [(5 psi psi), (3 R - 10 R)]. Temperature Range: -7 o to 65 o (20 o F o F). METERED OUT RIGHT NGLE FLOW (RF) ONTROL FETURES Eliminates at least one fitting. Efficient control of air at source. Locks in place once cylinder speed is set. ND DIMENSIONS PORT H L OW: 2 TO NPT 3/ NPT 1 (1.62) 7 (1.5) 19 (.75) 23 (.91) 3/ SPP 1 (1.62) 19 (.75) SFM / O.D. TUE FITTING 7 (1.5) 23 (.91) FLOW: 1 TO 2 PORT MOUNTED REGULTOR (PMR) FETURES Return flow equals regulated flow, self-relieving. Incorporates by-pass check. Proven payback with point of use air reductions. ND DIMENSIONS PORT NPT 3/ NPT (.6) 1 (3.1) (3.6) NPT 3/ NPT SPP 1 (3.1) SPP / O.D. TUE FITTING (.6) (3.6) 3/ NPT Operating pressure Primary: 1-16 R ( PSIG)
9 PNEUMTI ESSORIES PILOT OPERTED HEK (PO) VLVE FETURES Stops flow on loss of air. Eliminates at least one fitting. ESSORIES ND DIMENSIONS PILOT PORT 1 PORT 1 TO 2 (P12 = 90 psi) 3/ PORT NPT 2 (1.) P ILOT* PORT 1 UNF NPT SFM / NPT (.6) 55 (2.16) UNF 3/ NPT PORT 2 TO 1 (P12 = 0 psi) 3/ 2 SFM SPP 3/ O.D. TUE FITTING (.6) 2 (1.) 55 (2.16) M5 * VILLE Y SPEIL ORDER Operating Pressure: 1-10 R ( PSIG) SPP UNF 3/ NPT SOFT STRT FETURES Delays full flow based on number of turns of set screw. Prevents cylinders/loads from rapid extension at start up. ND DIMENSIONS PORT 1 SLOT DUSTMENT 1 PRIMRY PRESSURE NPT 3/ NPT (.6) 63 (2.) 69 (2.72) NPT 3/ NPT 3/ SPP 63 (2.) SPP SFM / O.D. TUE FITTING (.6) 69 (2.0) 3/ NPT Operating Pressure: 3-10 R (5-150 PSIG) time [s] number of turns 9
10 ESSORIES NOTES 10
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationF l o w c o n T R o l v a l v E S
Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,
More informationNickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Flow Control Valves NORTH MERICN FITTINGS & FLOW CONTROL VLVE CTLOG > Release 8.6 Nickel-Plated Brass Right ngle Flow Control Valves /Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel esign : Meter-Out,
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationPneumatic Function Fittings Metric & Inch
Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationSG3 Series Regulators - Pressure Reducing
SG3 Series Regulators - Pressure Reducing DSG333X1 Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-4; ASME B31; ASME BPVC
More informationParker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
More informationV83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationPROPORTIONAL PRECISION PRESSURE REGULATOR REGTRONIC SERIES
PROPORTIONL PREISION PRESSURE REGULTOR REGTRONI SERIES Proportional pressure regulators series REGTRONI have the job of precisely regulating the pressure in a system, the variables depending on the input
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More informationAir Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv
CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure
More informationAir Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.
Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu
More informationANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS
Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series
More informationPARTICULATE FILTER/REGULATOR
PRTICULTE FILTER/REGULTOR High flow with a wide range of adjustable output pressure ranges Optional low profile integrated gauge, Optional extended temperature range of -40 C to +80 C Threaded ports allow
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationSG1 Series Regulators - Pressure Reducing
SG1 Series Regulators - Pressure Reducing DSG131X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationBooster Regulator/Air Tank
Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationPneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationUltRo Dual Flow Reverse Osmosis Water System
UltRo Dual Flow Reverse Osmosis Water System Congratulations on this great investment to your health. **IMPORTANT NOTE BEFORE YOU BEGIN** We recommend you call your local friendly plumber to ensure proper
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationVAREC 180 SERIES PRESSURE REGULATORS
Double port regulators with a variety of model options for upstream and downstream pressure control FETURES Large diaphragm and a unique double port design achieve a sensitivity of less than 5%. Set pressure
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationEXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4
V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationAir Saving Valve. Pressure Valve Flow Valve
Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationPILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationlternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0
ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationSG2 Series Regulators - Pressure Reducing
SG2 Series Regulators - Pressure Reducing DSG2232X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationCheck Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
More informationE28/Q28 Safety Exhaust Valve Externally Monitored
E8/Q8 Safety Exhaust Valve Externally Monitored ulletin 9EM4 the total systems approach to air preparation Features Externally Monitored Safety Exhaust Valve Function When applications demand a safe environment
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationSTC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationPush-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationP33 Safety Exhaust Valve Externally Monitored. Bulletin 0700-B14 ENGINEERING YOUR SUCCESS.
P Externally Monitored ulletin 07004 ENGINEERING YOUR SUESS. Features Externally Monitored Function When applications demand a safe environment you can count on safety valves from Parker Hannifin. The
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationPanel-mounted valves Series T, Ø 22.5 mm
Series T, Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Basic valve 3/2-way, M5 (10/32 UNF) M 5 and G 1/8 2.122 Push button 18-T-23-011 2.126 Mushroom 18-T-23-012 2.126 2-position switch 18-T-23-013
More informationVACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationPRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set
More informationREGULATORS FOR SPECIFIC APPLICATIONS
SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and
More informationREFRIGERATION SYSTEM COMPONENTS
REFRIGERATION SYSTEM COMPONENTS henrytech.com Conventional Oil Separators The function of an Oil Separator is to remove oil from the discharge gas and return it to the Compressor either directly or through
More informationPlant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationAvenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationINSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
More informationBASIN AND WALL MIXER INSTALLATION INSTRUCTIONS
BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS IMPORTANT INFORMATION IMPORTANT All tapware and showers to be installed by a licensed plumber and to Australian Standards. Fit tempering and pressure reduction
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationPrecision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSeries 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position
Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationINDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
More informationIntegrated Fittings. Flow Controls. Check Valves. Blocking Valves. Slow Start Fittings. Threshold Sensor Valves
Integrated Fittings Flow ontrols ompact & Miniature Styles Brass & omposite Bodies Right Angle & In-line Inch & Metric Sizes Direct Mounting heck Valves ompact & light weight Inch & Metric sizes, BSPT,
More informationReduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections
Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Features General application The RP03 provides protection from both backsiphonage and backpressure
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationType ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
More informationPneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
More informationCAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
More informationPneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
More informationBERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
More informationHPIC D Hydrostatic Test Pump PRODUCT INFORMATION AND OPERATING INSTRUCTIONS
WIDDER TOOLS HPIC-10000-D Hydrostatic Test Pump PRODUCT INFORMATION AND OPERATING INSTRUCTIONS Description: The WIDDER Hydrostatic Test Systems C Series is a portable, selfcontained, air driven hydrostatic
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More informationADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationPressure and/or Temperature Pilot Operated Steam Regulators Series 2000
Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They
More information