Prestomatic Air Brake Push-In Fittings
|
|
- Joel Watkins
- 6 years ago
- Views:
Transcription
1 Ctog 3501E Prestomtic Air rke Push-In Fittings Mteris of Construction Fitting odies: Coet: Tube support: O-ring: rss rss Stiness Stee un omencture Exmpe: 68pmt-6-4 Attribute: 68 Me Connector pmt Air rke Push-In Fitting 6 3/8 (6/16) Tube Size 4 1/4 (4/16) Pipe Thred Appicbe Tube Tube Mteri: SAE J844 type A & nyon tubing Tube : 5/32, 1/4, 3/8, 1/2, 5/8, 3/4 Specifictions pressure RAGE: Temperture Rnges: Up to 250 PSI -40 to +200 F Ptented design of s 1/4 nd bove meet SAE J2494 nd.o.t. FMVSS ir brke performnce specifictions. Stiness stee support in s 1/4 nd bove ssures mximum fow nd performnce requirements of SAE J /32" hs brss support nd meets SAE J2494 nd OT FMVSS ir brke performnce specifictions. PTC-001 Assemby Instructions 1. Cut tubing squrey mximum of 15 nge owbe. Use of Prker cutter PTC-001 is recommended. 2. Check tht port or mting prt is cen nd free of debris. 3. Insert tubing into fitting unti it bottoms. Push twice to verify tht tubing is inserted pst coet nd O-Ring. 4. Pu on tubing to verify it is fuy inserted. 5. To disssembe, simpy press reese button, hod ginst body, nd pu tubing out of fitting. ote: in order to pss hot pu requirements of OT FMVSS nd SAE J support must be present in the end of the fitting before fin fitting ssemby. Insert tubing unti it bottoms epress button to remove tubing U.S. Pstent o. 5,683,120 4 Fuid System Connectors
2 Ctog 3501E Prestomtic Retining Ring ukhed Unions Prestomtic retining ring bukhed unions feture unique design tht provides the user with n economic method to inst nd ssembe union connection through bukhed. The retining ring bukhed unions feture smer enveope thn stndrd bukhed union connectors nd do not require wrench to mount or ssembe in crmped res. The extern se feture provides moisture brrier nd cn so prevent extern contmintion from entering into n encosed re. To inst, simpy support the bukhed union from behind nd ppy the extern se. Then push the extern retiner ginst the extern se with n ssemby too nd you hve reibe bukhed connection in confined re. Extern Se ES* I.. W PART no. TUE SIZE UKHEA UIO I.. W ES-50 1/ ES-75 3/ ES-87 1/ *Mteri is itrite (un ), 70 urometer EXTERA SEA (OPTIOA) ASSEMY TOO SUPPORT Union 62PMT o. 62PMT-4 1/ PMT-6 3/ PMT-6-4 3/8-1/ PMT-8 1/ PMT-10 5/ EXTERA RETAIER UKHEA 62PMTHR A P Retining Ring ukhed 62pmtbhr o. rec. hoe A IA p Mx P MAX di 62PMTHR-4 1/ PMTHR-6 3/ PMTHR-8 1/ PMTHR-10 5/ ukhed Union 62PMTH o. 66PMT p Mx b 66-4-X PMT bukhed hoe di. 62PMTH-4 1/ /16 3/4 9/16 62PMTH-6 3/ /16 1-1/16 7/8 62PMTH-8 1/ /4 1-1/4 1 62PMTH-10 5/ /4 1-3/8 1-1/8 Extern Retiner ERH* PART o. TUE SIZE UKHEA UIO A IA. W ERH-50 1/ ERH-75 3/ ERH-87 1/ ERH-100 5/ *Mteri Crbon Spring Stee W A IA Feme Connector 66PMT o. 66PMT-4-2 1/4 1/ /16 66PMT-4-4 1/4 1/ /16 66PMT-6-2 3/8 1/ /4 66PMT-6-4 3/8 1/ /4 66PMT-6-6 3/8 3/ /16 66PMT-8-4 1/2 1/ /8 66PMT-8-6 1/2 3/ /8 66PMT-8-8 1/2 1/ Fuid System Connectors
3 Ctog 3501E P ukhed Feme Connector 66PMTH o. A b bukhed hoe di. ukhed Me Connector 68PMTH o. p Mx b bukhed hoe di. 68PMTH-6-8 3/8 1/ /4 1-1/4 1 A 66PMTH-4-4 1/4 1/ /16 3/4 9/16 68PMTH-8-8 1/2 1/ /4 1-1/4 1 66PMTH-6-6 3/8 3/ /8 66PMTH-8-8 1/2 1/ /4 1-1/ Me Connector 68PMT o. Union Tee 164PMT T2 2 68PMT-4-2 1/4 1/ /2 68PMT-4-4 1/4 1/ /16 68PMT-4-6 1/4 3/ /4 68PMT-6-2 3/8 1/ /4 68PMT-6-4 3/8 1/ /4 68PMT-6-6 3/8 3/ /4 o. 1 TUE 2 SIZE PMT-4 1/4 1/ PMT-6 3/8 3/ PMT /8 1/ PMT-8 1/2 1/ PMT-10 5/8 5/ PMT-6-8 3/8 1/ /8 68PMT-8-4 1/2 1/ /8 68PMT-8-6 1/2 3/ /8 68PMT-8-8 1/2 1/ /8 68PMT /8 3/ PMT /8 1/ PMT /4 1/ /16 68PMT /4 3/ /8 Union Ebow 165PMT o. 165PMT-4 1/ PMT-6 3/ PMT-8 1/ PMT-10 5/ Me Connector to Metric Adpter 68PMT-X-M 1 PART O. TUE SIZE METRIC 2 68PMT-4-M12 1/4 M12X / PMT-4-M16 1/4 M16X /8.39 Union ukhed Ebow 165PMTH C 68PMT-6-M12 3/8 M12X / PMT-6-M16 3/8 M16X /8.39 o. 1 2 c fow di. d bukhed hoe di. 68PMT-6-M22 3/8 M22X / PMTH-8 1/ / PMT-8-M12 1/2 M12X / PMT-8-M16 1/2 M16X / PMT-8-M22 1/2 M22X / PMT-10-M16 5/8 M16X Fuid System Connectors
4 Ctog 3501E WRECH FATS WRECH FATS Me Ebow PMT o. WRECH FATS 169PMT-4-2 1/4 1/ /2 9/16 169PMT-4-4 1/4 1/ /2 9/16 169PMT-4-6 1/4 3/ /2 11/16 169PMT-6-2 3/8 1/ /16 11/16 169PMT-6-4 3/8 1/ /16 11/16 169PMT-6-6 3/8 3/ /16 11/16 169PMT-6-8 3/8 1/ /16 7/8 169PMT-8-4 1/2 1/ /16 5/8 169PMT-8-6 1/2 3/ /16 3/4 169PMT-8-8 1/2 1/ /16 7/8 169PMT /8 3/ /8 3/4 169PMT /8 1/ /8 7/8 Me Ebow Rigid PMTS/269PMT o. Pipe n WRECH FATS 169PMTS-4-2 1/4 1/ /2 169PMTS-4-4 1/4 1/ /2 169PMTS-4-6 1/4 3/ /2 169PMTS-6-2 3/8 1/ /16 169PMTS-6-4 3/8 1/ /16 169PMTS-6-6 3/8 3/ /4 169PMTS-6-8 3/8 1/ /16 169PMTS-8-4 1/2 1/ /16 169PMTS-8-6 1/2 3/ /16 169PMTS-8-8 1/2 1/ /16 169PMTS /8 3/ /8 169PMTS /8 1/ /8 169PMTS /4 1/ WRECH FATS Me Ebow Position PMTR PART O. TUE SIZE WRECH FATS 169PMTR-4-4 1/4 1/4 9/ /2 169PMTR-6-6 3/8 3/8 3/ /16 169PMTR /8 1/2 7/ /8 Me Ebow ong Rigid PMT o. Pipe n WRECH FATS 169PMT-6-4 3/8 1/ /16 169PMT-6-8 3/8 1/ /8 169PMT-6-6 3/8 3/ /8 169PMT-8-8 1/2 1/ /8 169PMT /8 1/ /8 WRECH FATS Me Ebow to Metric Adjustbe 169PMTS-X-M PART O. TUE SIZE METRIC WRECH FATS (mm) (mm) WRECH FATS M 169PMTS-4-MI2 1/4 M12X PMTS-4-M16 1/4 M16X PMTS-4-M22 1/4 M22X PMTS-6-M12 3/8 M12X PMTS-6-M16 3/8 M16X PMTS-8-M12 1/2 M12X PMTS-8-M16 1/2 M16X PMTS-8-M22 1/2 M22X M Me Ebow ukhed 169PMTH o. C bukhed hoe di. 169PMTH6-8 3/8 1/ /4 7/ PMTH8-8 1/2 1/ /4 7/8 1 C 7 Fuid System Connectors
5 Ctog 3501E WRECH FATS WRECH FATS 1 Feme Ebow Swive PMT o. WRECH FATS 170PMT-4-2 1/4 1/ /2 1/2 Feme Ebow Rigid PMTS o. Pipe n WRECH FATS 170PMTS-4-2 1/4 1/ /16 170PMTS-4-4 1/4 1/ /16 170PMTS-6-2 3/8 1/ /16 170PMTS-6-4 3/8 1/ /16 170PMTS-6-6 3/8 3/ /16 170PMTS-8-4 1/2 1/ /16 170PMTS-8-6 1/2 3/ /16 170PMTS-8-8 1/2 1/ Me Run Tee Swive 171PMT o. WRECH FATS 171PMT-4-2 1/4 1/ /16 1/2 171PMT-4-4 1/4 1/ /16 1/2 171PMT-4-6 1/4 3/ /16 1/2 171PMT-6-4 3/8 1/ /16 5/8 171PMT-6-6 3/8 3/ /16 5/8 171PMT-8-4 1/2 1/ /8 7/8 171PMT-8-6 1/2 3/ /4 7/8 171PMT-8-8 1/2 1/ /8 7/8 WRECH FATS WRECH FATS Me Run Tee Rigid 171PMTS o n wrench fts 171PMTS-4-2 1/4 1/4 1/ /32 171PMTS-4-4 1/4 1/4 1/ /32 171PMTS /4 3/8 1/ /8 171PMTS-6-4 3/8 3/8 1/ /8 171PMTS /8 1/4 1/ /8 171PMTS /8 1/4 3/ /8 171PMTS-6-6 3/8 3/8 3/ /8 171PMTS-6-8 3/8 3/8 1/ /8 171PMTS-8-4 1/2 1/2 1/ /8 Me rnch Tee Swive 172PMT o. WRECH FATS 172PMT-4-2 1/4 1/ /16 1/2 172PMT-4-4 1/4 1/ /16 1/2 172PMT-6-2 3/8 1/ /16 5/8 172PMT-6-4 3/8 1/ /16 5/8 172PMT-6-6 3/8 3/ /16 5/8 172PMT-8-4 1/2 1/ /8 7/8 172PMT-8-6 1/2 3/ /4 7/8 172PMT-8-8 1/2 1/ /8 7/8 Me rnch Tee Rigid 172PMTS o n wrench fts 172PMTS-4-2 1/4 1/4 1/ /2 172PMTS-6-4 3/8 3/8 1/ /8 172PMTS /8 1/4 1/ /8 172PMTS-6-6 3/8 3/8 3/ /8 172PMTS-6-8 3/8 3/8 1/ /8 172PMTS-8-6 1/2 1/2 3/ /8 172PMTS /2 3/8 1/ /8 172PMTS-8-8 1/2 1/2 1/ /8 2 1 T2 WRECH FATS WRECH FATS 2 T2 8 Fuid System Connectors
6 Ctog 3501E WRECH FATS 1 Me Ebow Swive PMT o. WRECH FATS WRECH FATS 179PMT-4-2 1/4 1/ /16 9/16 179PMT-4-4 1/4 1/ /16 9/16 179PMT-6-2 3/8 1/ /16 3/4 179PMT-6-4 3/8 1/ /16 3/4 179PMT-6-6 3/8 3/ /16 3/4 179PMT-8-4 1/2 1/ /8 7/8 179PMT-8-6 1/2 3/ /4 7/8 179PMT-8-8 1/2 1/ /8 7/8 u port 90 Me Ebow Position 189PMTR o n1 2 2 TUE 2 TUE wrench fts 189PMTR /8 1/4 3/ /16 189PMTR /8 3/8 1/ /16 189PMTR /8 3/8 3/ /16 189PMTR /8 1/4 3/ /8 189PMTR /8 3/8 3/ /8 Me Ebow Position Swive PMTR PART O. TUE SIZE WRECH FATS WRECH FATS 179PMTR-4-4 1/4 1/4 9/ /16 179PMTR-8-8 1/2 1/2 7/ /8 Push-To-Connect Fitting Pug 639PM/639PMT o. M A 639PMT-4 1/ PMT-6 3/ PMT-8 1/ Specify coor when ordering ck () or ue (U), exmpe 639PMT-4U ote: use pproprite PM/PMT stye connection s determined by prt number. M A WRECH FATS Me Ebow Rigid PMTS o. WRECH FATS 179PMTS-4-2 1/4 1/ /16 179PMTS-4-4 1/4 1/ /16 179PMTS-6-2 3/8 1/ /4 179PMTS-6-4 3/8 1/ /4 179PMTS-6-6 3/8 3/ /4 179PMTS-8-4 1/2 1/ /16 179PMTS-8-6 1/2 3/ /16 179PMTS-8-8 1/2 1/ /16 179PMTS /8 3/ /8 179PMTS /8 1/ /8 179PMTS /4 1/ Fuid System Connectors
Ball Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
86300 Pag. 9.6 86310 Pag. 9.6 86320 Pag. 9.6 86330 Pag. 9.6 86700 Pag. 9.6 86710 Pag. 9.7 86720 Pag. 9.7 6300 Pag. 9.7 6310 Pag. 9.7 6400 Pag. 9.8 6410 Pag. 9.8 6560 Pag. 9.8 6570 Pag. 9.8 86900 Pag. 9.9
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationBarbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
More informationCompression Fittings
Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377
More informationCAUTION: All current manufacturers of 85A PU tubing do not approve the use of push-toconnect fittings with their product.
ataog 3501E Prestook eta Fittgs aterias of onstrution ike Pated Bodies: O-rg: Reease Button: Grab Rg: ote: ike pated brass itrie (other ompounds avaiabe on request) Poyaeta Staess Stee For brass body Prestook
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationSGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility
More informationSTRAIGHT CONNECTOR 5 80 N N N N N N N. Copyright 2016 by K-net All Rights Reserved
STRAIGHT CONNECTOR The Push-fit straight connectors make splicing microduct fast and easy. Simply push the microduct into the center of the connector. No tools are required. The connector can be connected
More informationHose Barb Fittings HOSE CLAMP 3/16" 97 HC-3 1/4" 1/4" 97 HC-3 1/4" 5/16" 97 HC-6 1/4" 3/8" 97 HC-6 1/8" 1/2" 97 HC-8 1/8" 5/8" 97 HC-12 1/8"
atalog 3501E ATERIAS OF OSTRUTIO FITTIS: O-RI: BRASS FUOROARBO OEATURE EXAPE: 125HB-6-4 125 HB ATTRIBUTE: BARB TO AE BARB 6 3/8 I.. 4 1/4 PTF/PTF APPIABE TUBE TUBE ATERIA: RUBBER, PH I..: 1/4, 5/16, 3/8,
More informationIndustrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationBypass Compensator Cartridge, Size 16
Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,
More informationIndustrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationIntegrated Fittings. Flow Controls. Check Valves. Blocking Valves. Slow Start Fittings. Threshold Sensor Valves
Integrated Fittings Flow ontrols ompact & Miniature Styles Brass & omposite Bodies Right Angle & In-line Inch & Metric Sizes Direct Mounting heck Valves ompact & light weight Inch & Metric sizes, BSPT,
More informationSTC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
More informationPrestolok PLS Stainless Steel Push-to-Connect Fittings
Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationPrestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
More informationPressure reducing valves (with check valve) X(C)G, XGL
Pressure reducing vlves (with check vlve) X()G, XGL 3- Pressure ontrol Vlves unctionl Symbols XG XGL X XG X Vlve is used to set pressure in brnch circuit lower thn pressure of the circuit. y connecting
More informationHot-Air Blowers 12 / / Hot-Air Blowers
Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17
More informationSeries KJ. Miniature One-touch Fittings. Applicable Tube
Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing,
More informationVB-7253 Series. Application. Features. Applicable Literature
VB-7253 Series 1/2 to 2 Screwed NPT Stinless Steel Trim with Teflon Disc Stem Up Open, Two-Wy Vlves Generl Instructions Appliction VB-7253 series single set, stem down to close, two wy vlves control wter
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationInstructions. Electronic Aquarium Water Change System. Replenishing Water. Extracting Water. Includes instructions for:
Instructions Electronic Aqurium Wter Chnge System Includes instructions for: Replenishing Wter Extrcting Wter INTRODUCTION WHAT S INCLUDED The Aquplenish Wter Chnger conditions, monitors nd replenishes
More informationSideTrak 830/840. Process Gas Mass Flow Meters and Controllers. FEATURES DESCRIPTION
Process Gas Mass Flow Meters and Controllers FETURES n Direct monitoring of mass flow eliminates need for ancillary pressure and temperature sensing n Patented straight sensor tube with access ports permits
More informationReplacing the Reverse Osmosis ( RO ) Membranes
Replacing the Reverse Osmosis ( RO ) Membranes Changing your membranes is a relatively straightforward procedure that can be achieved by carefully following these instructions. During disassembly, water
More informationTANK MATE INCLUDES: TOOLS REQUIRED: CONRADER VALVES 3/4 WRENCH **TUBING CUTTERS TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING
CONRADER VALVES TANK MATE AUTOMATIC DRAIN VALVE INSTALLATION KIT INCLUDES: TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING WV-1 DRAIN VALVE TOOLS REQUIRED: 3/4 WRENCH **TUBING CUTTERS ** NEEDED TO CUT METAL
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationCatalog No. C09118A. Nitrogen Gas Spring Linked System Components
Catalog No. C09118A Nitrogen Gas Spring Linked System Components Everything You Need to Construct a Linked System Linked Systems Introduction Numerous Piping Options Many customers recognize the benefits
More informationBRASS AIR BRAKE FITTINGS
RSS IR RKE FITTINGS ir rake (all Sleeve) Used WIth: Copper Tubing & Nylon ir rake Tubing Typical pplication: ir rake Systems Pressure: 150PSI Vibration Rating : Fair Material: C360 rass Sealing Method:
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationReproduction. Not for. Mower - Roller Bar WARNING. Installation and Leveling Instructions. Attention Setup Personnel: Model: ,
Mower - Roller Br Instlltion nd Leveling Instructions 4 Model: 9555, 9594 Attention Setup Personnel: 5 4 5 Model: 958, 9595 Model: 9559 Model: 959 The sfety wrnings provided in this guide nd in the trctor's
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
More informationLOKRING FOR THE BEST A/C REPLACEMENT CONNECTIONS
Santech Industries, Inc. 2450 Handley Ederville Road Ft. Worth, TX 76118 USA Phone: (817) 589-1212 Fax: (817) 589-5900 E-Mail: sales1@santech.com - Web: http://www.santech.com LOKRING FOR THE BEST A/C
More informationM/160300/M/11, M/160300/M/12 Angular grippers
M/63/M/, M/63/M/2 ngular grippers Single acting, double acting - Magnetic piston - Ø 8... 25 mm Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationTRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS
O-Ring Face Seal Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS O-Ring Face Seal METAL FORMING SOLUTIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationAdapters and Tube Fittings Index
dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and
More informationTHERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS
THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationA Measurement Framework for National Key Performance Measures
MINISTERIAL COUNCIL ON EDUCATION, EMPLOYMENT, TRAINING AND YOUTH AFFAIRS Performnce Mesurement nd Reporting Tskforce Working for qulity eduction outcomes A Mesurement Frmework for Ntionl Key Performnce
More informationGerman / British / Japanese Medical Gas Outlets
S o utio ns for Life German / British / Japanese Medica Gas Outets 38X6 / 38X7 / 38X8 Coor-coded for easy gas service identification Moduar structure, convenient maintenance German (DIN) Gas Outet is CE
More informationPneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
More informationFLANGES, TEES AND CROSSES, SPOOLS AND ADAPTERS. Sara Sae
FLANGES, TEES AND CROSSES, SPOOLS AND ADAPTERS Sara Sae Quality and Innovation Products Catalog Spools and Adapters Sara manufactures a wide range of Spools and Adapter Flanges conforming to API-16 A and
More informationINSTALLATION GUIDELINES
STYLE No. UNWD10 Universal Traditional One Hole Instant Hot and Filtered with Metal STYLE No. UNWD30 Universal Industrial One Hole Instant Hot and Filtered cold Water Dispenser with Metal STYLE No. UNWD50
More informationINSTALLATION GUIDELINES
STYLE No. UNWD11 Universal Traditional One Hole Instant Hot Water Dispenser with Metal Lever Handle STYLE No. UNWD31 Universal Industrial One Hole Instant Hot Water Dispenser with Metal Lever Handle STYLE
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationV46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V46 Issue Date 11//1 V46 Series -Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V46 Series -Way Pressure-Actuated Water-Regulating
More informationMax. Recom. Tube Wall Min. Bend Working Min. Burst O.D. Thickness Radius Pressure Pressure Style (Inches) (Inches) (Inches) (PSI) (PSI) Fittings
General Information Thermoplastic Tubing/Fitting Reference Guide Tube Max. Recom. Tube Wall Min. end Working Min. urst O.D. Thickness Radius Pressure Pressure Style (Inches) (Inches) (Inches) (PSI) (PSI)
More informationLOKRING Stainless Steel (SS40) and Carbon Steel (CS) Pipe Fittings Table of Contents
38376 APOLLO PARKWAY WILLOUGHBY, OHIO USA 44094 www.lokring.com LOKRING Stainless Steel (40) and Carbon Steel (CS) s Table of Contents Information Page 2.. Design Page 3-4.. Pressure and Temperature Ratings
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationGENERAL DESCRIPTION MODEL RCW DRY SYSTEM CONFIGURATION. Technical Support Airpark Dr. Standish, MI 48658
077 Airpark Dr. Standish, MI 8658 989-8-583 www.globesprinkler.com Technical Support 989-1-00 MODEL RCW DRY SYSTEM GENERAL DESCRIPTION The Globe Model RCW* dry valve is a hydraulically operated external
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More information40K TLX Nozzles 40K TLX
40K TLX Nozzles 40K TLX Application/Features: These nozzles are designed specifically for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. The TLX Nozzle features a special
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated
More informationTECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
More informationFOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
More informationV48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V48 Issue Date 08/30/01 V48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V48 Series 3-Way Pressure-Actuated Water-Regulating
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
More informationHalsey Taylor Owners Manual STOP!
Halsey Taylor Owners Manual 4710 Freeze Resistant Floor Mounted Steel Fountain STOP! PLEASE READ THE FOLLOWING INFORMATION. ITALLATION ITRUCTIO FOR THE 4710FR FTN. WITH 97243C SINGLE VALVE CONTROL ASSEMBLY
More informationSUN WP INDUSTRIAL VALVES INDUSTRIAL VALVES 2-PIECE BALL VALVE FULL BORE. STANDARD PART NUMBERS Art female/female. Art.
INDUSTRI VVES SUN WP PIEE VVE FU ORE UNI EN ISO : ertificato n / MIN STNDRD FETURES ONSTRUTION: ISI ERTIFITIONS: DVGW for gas TÜV for T uft DIMETER: from DN /" to DN " PRESSURES: from R to R TEMPERTURE
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
More informationNon-Metallic Rigid Piping Components
Non-Metallic Rigid Piping Components [ BioConnexx Sanitary Flange Rigid Piping Components are available in custom sizes to suit your applications. Components are constructed of polypropylene and PVDF.
More informationInert Air (N2) Systems Manual
INSTRUCTION MANUAL Inert Air (N2) Systems Manual N2-MANUAL 2.10 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. GENERAL INFORMATION Positive pressure nitrogen gas pressurizing
More informationVeljan TXB Single Vane Pumps
Vejan TXB inge Vane Pumps For Mobie or Industria Use 12 Dispacements Avaiabe Maximum Pressure: 3000 psi and 210 bar Maximum peed - 2500 rpm www.fuidynefp.com Mode Code Breakdown TXB 1 B03 2 R 00 D 1 01
More informationNitrogen Gas Spring Hose System Components
Nitrogen Gas Spring Hose System Components Control Panels TNKMAN Distribution Blocks Compression Tanks Hose Systems with Hoses, Fittings and Adapters Micro EO24 Hose and Tube System EZ-Hose System EO24-Hose
More informationSyringe, Distribution Valve and Infusion Pump Removal/Replacement ATTENTION SYRINGE REPLACEMENT
ATTENTION SYRINGE REPLACEMENT Please read through the document completely before starting any repairs. Refer to the proper section in the service manual for complete removal and replacement procedures.
More informationPCT MINIMUM DOCUMENTATION
Ref.: PCT Minimum Documenttion pge: 4.1.1 PCT MINIMUM TION INVENTORY S CCORDING TO PCT RULE 34.1 (PERIOD FROM 1920 TO 2000) Explntory Notes 1. On the following pges is given the inventory of ptent documents,
More informationSeries AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use
CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
More informationADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
More informationWorkrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters
Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete
More informationTwo Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationTECHNICAL DATA OBSOLETE
April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,
More informationSINORIX Valve Reconditioning
Document No. 129-097 SINORIX Valve Reconditioning Product Description These instructions explain how to recondition and fill 1-inch through 4-inch SINORIX valves. Product Numbers Verify that the appropriate
More informationCommon Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems)
Common Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems) Connectors & Plugs Umbilicals Common Tubing Handpiece Tubing Index for Procenter Units
More informationML OXIPRES INSTRUCTION MANUAL
ML OXIPRES INSTRUCTION MNUL Version 2018.02.01 xel Kiers Vej 34-8270 Højbjerg - Denmark MIKROL RHUS /S Tlph: +45 86 29 61 11 - Fax: +45 86 29 61 22 - E-mail: ml@mikrolab.dk INDEX WRNING... page 2 DESCRIPTION...
More information>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationS5 HAB/HAD SEAT Abductor / Adductor
Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR
More informationLEAK TROUBLESHOOTING
LEAK TROUBLESHOOTING If you suspect that your TMC isolation system is leaking (most often evidenced by going through air/nitrogen tanks too quickly), this guide will help you to find and fix the problem.
More informationPENTAIR/PAC FAB HI-FLOW, 2" PENTAIR/PAC FAB 2" PVC SLIDE VALVE
PENTIR/PC F HI-FLOW, " MODELS 0, 00, E-0 COMPLETE HI FLOW VLVE, 0 NO PLUMING -0 COMPLETE VLVE W/ PLUMING 00 SND FILTER VERSION 00- COMPLETE VLVE W/ PLUMING DE -0 HNDLE, VLVE 0-0 SCREW, HNDLE S.S 0-0 WSHER,
More informationMODEL UMC UNIVERSAL MANIFOLD CHECK ASSEMBLY
077 irpark Dr. Standish, MI 858 989-8-58 www.globesprinkler.com Technical Support 989--00 techservice@globesprinkler.com MODEL UMC UNIVERSL MNIFOLD CHECK (With or Without Control Valve) GENERL DESCRIPTION
More informationFlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number
3M Water Filtration Products FlashGARD HP Reverse Osmosis Filtration System Model Number FSTMO75 Part Number 56123-06 Installer: Please leave this manual with owner/operator. End User: Please retain for
More informationHydrogen Valves, Fittings and Tubing
Hydrogen Valves, Fittings and Tubing utech is a leading brand of high-pressure valves, fittings and tubing designed to meet the critical requirements of today s most severe applications. We prove our commitment
More informationDIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIL PRESSURE REGULTING VLVE zon Body material pressure diameter Max. temperature Grey cast iron DN 120 according to the pressure equipment directive 2014/68/UE E marking for DN 065 FETURES compact
More informationMODEL UMC UNIVERSAL MANIFOLD CHECK ASSEMBLY
077 irpark Dr. Standish, MI 858 989-8-58 www.globesprinkler.com Technical Support 989--00 techservice@globesprinkler.com MODEL UMC UNIVERSL MNIFOLD CHECK (With or Without Control Valve) GENERL DESCRIPTION
More informationSTART UP MANUAL MADE IN USA REV US and Foreign patents and patents pending see
START UP MANUAL MADE IN USA 004-027-8896-00 REV 033116 295 East Corporate Place Suite 100 Chandler, AZ 85225 Toll Free: 1.800.621.5886 Phone: 480.893.7607 Fax: 480.753.3397 Paramount@1Paramount.com www.1paramount.com
More informationValve Selection Guide
Vave eection Guide eection Guide for uti-port, nge and Ebow Diaphragm Vaves technoogica eadership by design an O 9 certified company eection Guide Customize a vave to meet your system requirements. Your
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More information