Ball Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
|
|
|
- Brett O’Neal’
- 5 years ago
- Views:
Transcription
1 86300 Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag Pag. 9.9 Stainless Steel all Valves Pag Pag ignep reserves the right to vary models and dimensions without notice
2 ROME PTED RSS VVES all Valves VVES
3 TENI RTERISTIS Reference Standard 1907/ /65/E PED 2014/68/UE S EN 331:2015 SIION FREE ar Pressure Rating omponent Parts and Materials Vacuum ~ 250 PSI bar ~ 20 bar MPa ~ 2.0 MPa Temperatures NR -4º F ~ 176º F -20º ~ 80º EPDM -40º F - 266º F -40º - 130º FKM 5º F - 266º -15º - 130º 1 P66 lass Reinforced andle 2 hrome Nickel Plated rass Spindle 3 NR O-Ring Seal 4 PTFE Seats 5 hrome Nickel Plated rass ody 6 cetalic Resin Plate 7 Steel Screw 8 NR O-Ring Seal 9 rass Fitting 10 hrome Nickel Plated rass all Media ompressed air Water Oils Rated for gases, consult factory for details Threads as in conformity with ISO7.1, S 21, DIN Parallel gas in conformity with ISO 228 lass. PRESSURE - TEMPERTURE RTINS DIRM PSI F Mpa PTFE + FKM PTFE + NR
4 VVES SPEIFITIONS Flow Rate (FM) 1/8" PSI PSI PSI PSI PSI Inlet Pressure P1 (PSI) QN=64.42 FM Flow Rate (FM) 1/4" PSI PSI PSI PSI PSI 30 Inlet Pressure P1 (PSI) QN=58.32 FM Outlet Pressure P2 (PSI) Outlet Pressure P2 (PSI) 3/8" PSI 180 Inlet Pressure P1 (PSI) 1/2" PSI Inlet Pressure P1 (PSI) Flow Rate (FM) PSI 60 PSI 45 PSI 30 PSI QN= FM Flow Rate (FM) PSI 60 PSI 45 PSI 30 PSI QN= FM Outlet Pressure P2 (PSI) Outlet Pressure P2 (PSI) 3/4" 90 PSI PSI PSI Inlet Pressure P1 (PSI) QN= FM PSI PSI
5 VVES SPEIFITIONS Flow Rate & Pressure Drop In the table below, we specify the flow rate factors of our ball valves. These factors represent the amount of air and water that flows through the valve. They are measured by ubic Feet per Minute at 60 F /8" 1/4" 3/8" 1/2" 3/4" 3 Factors of flow rate Thread Size FM m 3 /h 1/8" /4" /8" /2" Pressure Drop (PSI) /4" Flow Rate (FM) Option PRT NUMER SIZE OOR TYPE OF TE SE TYPE OF NDE /8-3/8 RED PTE NR lue Plate NR Standard Short andle for Valve 1/8-1/4-3/8-1/2 Standard ong andle for Valve 3/4 If required RO Red Plate reen Plate FKM NR EPDM ON andle VE White Plate N Yellow Plate I ong andle with Spindle Extension S: EN331 MOP5 10 Yellow Plate EN 331 I 9.5
6 86300 FEME X FEME Part No. DN ES /8 1/8.217 (5,5).551 (14) (15) (37,5).748 (19).827 (21) /4 1/4.217 (5,5).551 (14) (15) (46).748 (19).827 (21) /8 3/8.315 (8).709 (18) (19) (48,5).748 (19).866 (22) /2 1/2.394 (10).866 (22) (23) (62) (26) (30,5) Es ME X FEME Part No. DN ES F /8 1/8.217 (5,5).551 (14) (15).335 (8,5) (37,5).748 (19).827 (21) /4 1/4.217 (5,5).551 (14) (15).512 (13) (46).748 (19).827 (21) /8 3/8.315 (8).709 (18) (19).512 (13) (48,5).748 (19).866 (22) /2 1/2.394 (10).866 (22) (23).669 (17) (62) (26) (30,5) /4 3/4.551 (14) (28) (30).689 (17,5) (63,5) (49,5) (33,5) F Es IN TUE X IN TUE Inch tube Part No. Tube Tube ES /8 1/8.551 (14) (15) (42,5).748 (19).828 (21) /4 1/4.551 (14) (15) (46,5).748 (19).828 (21) /8 3/8.709 (18) (19) (60,5).748 (19).866 (22) Es IN TUE X ME Part No. Tube F ES /32 (4) 1/8.332 (8.5).551 (14) (15) (35).741 (19).819 (21) /4 1/8.332 (8.5).551 (14) (15) (40).741 (19).819 (21) /4 1/4.488 (12.5).551 (14) (15) (38.5).741 (19).819 (21) /8 3/8.507 (13).709 (18) (19) (45).741 (19).858 (22) F Es TREE POSITION (OSED ENTER) P Part No. // DN ES1 ES2 1 2 S max /8.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /4.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /8.276 (7).669 (17).827 (21) (48,5).748 (19) (35).866 (22).177 (4,5) ES1 ES2 1 S 2 No as 9.6
7 S all Valves TREE POSITION (OPEN ENTER) P Part No. // DN ES1 ES2 1 2 S max /8.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /4.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /8.276 (7).827 (21).827 (21) (48,5).748 (19) (35).866 (22).177 (4,5) ES1 ES2 2 1 No as RIT NE P Part No. / DN ES1 ES2 1 2 S max /8.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /4.217 (5,5).669 (17).669 (17) (37,5).748 (19) (33,5).650 (16,5).177 (4,5) /8.276 (7).669 (17).827 (21) (39).748 (19) (35).866 (22).177 (4,5) ES1 ES2 1 S 2 No as 6300 FEME X FEME SPT Part No. DN ES F M /8 1/8.217 (5,5).551(14) -.591(15).291 (7,4).291 (7,4) (36).748 (19).827 (21) /4 1/4.217 (5,5).551(14) -.591(15).433 (11).433 (11) (43).748 (19).827 (21) /8 3/8.315 (8).709(18) -.748(19).449 (11,4).449 (11,4) (47).748 (19).866 (22) /2 1/2.394 (10).866(22) -.906(23).591 (15).591 (15) (59) (26) (30,5) /4 3/4.551 (14) 1.102(28) (30).642 (16,3).642 (16,3) (67) (50) (33) 6310 ME X FEME SPT Part No. DN ES F M /8 1/8.217 (5,5).551(14) -.591(15).291 (7,4).291 (7,4) (36).748 (19).827 (21) /4 1/8.217 (5,5).551(14) -.591(15).433 (11).291 (7,4) (40,5).748 (19).827 (21) /4 1/4.217 (5,5).551(14) -.591(15).433 (11).433 (11) (43).748 (19).827 (21) /8 3/8.315 (8).709(18) -.748(19).449 (11,4).449 (11,4) (46).748 (19).866 (22) /2 1/2.394 (10).866(22) -.906(23).591 (15).591 (15) (57) (26) (30,5) /4 3/4.551 (14) 1.102(28) (30).642 (16,3).642 (16,3) (63) (50) (33) 9.7
8 6400 FEME X FEME -TRED Part No. DN ES F M /8 1/8 1/8.217 (5,5).551(14) -.591(15).276 (7).276 (7) (35).748 (19).827 (21) /4 1/4 1/4.217 (5,5).551(14) -.591(15).315 (8).315 (8) (37).748 (19).827 (21) /8 3/8 3/8.315 (8).709(18) -.748(19).354 (9).354 (9) (42).748 (19).866 (22) /2 1/2 1/2.394 (10).866(22) -.906(23).394 (10).394 (10) (49) (26) (30,5) /4 3/4 3/4.551 (14) 1.102(28) (30).472 (12).472 (12) (58) (50) (33) 6410 ME X FEME -TRED Part No. DN ES F M /8-1/8 1/8 1/8.217 (5,5).551(14) -.591(15).276 (7).276 (7) (34).748 (19).827 (21) /4-1/8 1/4 1/8.217 (5,5).551(14) -.591(15).315 (8).276 (7) (35).748 (19).827 (21) /4-1/4 1/4 1/4.217 (5,5).551(14) -.591(15).315 (8).315 (8) (35).748 (19).827 (21) /8-3/8 3/8 3/8.315 (8).709(18) -.748(19).354 (9).354 (9) (39).748 (19).866 (22) /2-1/2 1/2 1/2.394 (10).866(22) -.906(23).394 (10).394 (10) (45) (26) (30,5) /4-3/4 3/4 3/4.551 (14) 1.102(28) (30).472 (12).472 (12) (52) (50) (33) 6560 TUE X TUE Metric tube Part No. Tube Tube DN ES /32 (4) 5/32 (4).118 (3).551(14) -.591(15) (44).748 (19).827 (21) (5).551(14) -.591(15) (48).748 (19).827 (21) /16 (8) 5/16 (8).217 (5,5).551(14) -.591(15) (48).748 (19).827 (21) (8).709(18) -.748(19) (58,5).748 (19).866 (22) (10).866(22) -.906(23) (66) (26) (30,5) No as Es 6570 TUE X ME Metric tube - SPT Part No. Tube DN F ES /8 1/8 5/32 (4).118 (3).335 (8,5).551(14) -.591(15) (35).748 (19).827 (21) /8 1/ (5).335 (8,5).551(14) -.591(15) (40).748 (19).827 (21) /8 1/8 5/16 (8).217 (5,5).335 (8,5).551(14) -.591(15) (41,5).748 (19).827 (21) /4 1/ (8).492 (12,5).551(14) -.591(15) (38,5).748 (19).827 (21) /4 1/ (10).492 (12,5).551(14) -.591(15) (45,5).748 (19).866 (22) No as F ES 9.8
9 VVE ESSORIES SORT NDE Part No. Size Valve (19).433 (11) 1/8-1/4-3/ (26).590 (15) 1/2-3/4 Standard ON NDE Part No. Size Valve (35).433 (11) 1/8-1/4-3/ (50).590 (15) 1/2-3/4 Standard STEM EXTENSION KIT Part No. Size 1/ (58) / (58) 3/ (59) / (68) 3/ (70) OOR PTE Part No. olor Size lue (Standard olor) 1/8-1/4-3/ Red 1/8-1/4-3/ reen 1/8-1/4-3/ Yellow 1/8-1/4-3/ White 1/8-1/4-3/ lue (Standard olor) 1/2-3/ Red 1/2-3/ reen 1/2-3/ Yellow 1/2-3/ White 1/2-3/4 9.9
10 INOX SERIES: MINIVVE IN STINESS STEE ISI 316 TENI RTERISTIS Reference Standard 1907/ /65/E PED 2014/68/UE SIION FREE ar Pressure Rating Vacuum ~ 580 PSI bar ~ 40 bar MPa ~ 4 MPa Temperatures Minimum temperature Maximum temperature in continuos Maximum temperature for short term 5 F F F omponent Parts and Materials 1 Stainless steel ISI 316 ody 2 PTFE Seats 3 Stainless steel ISI316 Spindle 4 FKM Seal O-RIN 5 Stainless steel ISI316 ex Nut 6 Stainless steel ISI316 Spindle 7 Stainless steel ISI316 all 8 FKM Seal O-RIN 9 Stainless steel ISI316 Fitting Media ompressed air Vacuum Water Oils Threads as in conformity with ISO7.1, S 21, DIN FEME x FEME Part No. DN F M (1/8) 0.3 (1/8) (1/4) (1/4) F M ME x FEME Part No. DN F M (1/8) 0.3 (1/8) (1/4) (1/4) F M 9.10
57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
HIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
Ball Valves Gemels GE3 3-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE3 3-way high pressure ball valves
Carbon Steel Ball Valves Gemels 7.1.1 GE3 3-WAY HIGH PRESSURE BALL VALVES GE3 carbon steel GE3 G 1/2 DN13 1 1 1 1 A B Type and way of valve GE3 3-way high pressure ball valves Valves dimension of inch
Overview of types. Technical data. Safety notes
Technical data sheet R2..-S.. Open-close ball valves, 2-way, with internal thread For open and closed cold and warm water systems For shut-off functions on the water side and 2-point controls in U and
Propor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
Parker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
SUN WP INDUSTRIAL VALVES INDUSTRIAL VALVES 2-PIECE BALL VALVE FULL BORE. STANDARD PART NUMBERS Art female/female. Art.
INDUSTRI VVES SUN WP PIEE VVE FU ORE UNI EN ISO : ertificato n / MIN STNDRD FETURES ONSTRUTION: ISI ERTIFITIONS: DVGW for gas TÜV for T uft DIMETER: from DN /" to DN " PRESSURES: from R to R TEMPERTURE
Tank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
Technical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
BTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
Overview of types. Technical data
Technical data sheet R2..xx-S.. Characterised control valves, 2-way, with internal thread For open and closed cold and warm water systems For modulating water-side control of U and heating systems ir bubble
High Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
Products no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
PROPORTIONAL PRECISION PRESSURE REGULATOR REGTRONIC SERIES
PROPORTIONL PREISION PRESSURE REGULTOR REGTRONI SERIES Proportional pressure regulators series REGTRONI have the job of precisely regulating the pressure in a system, the variables depending on the input
Safety valves. Component-tested safety valves DN Compressed Air Accessories II Hoses, valves etc. 15. Technical data. Exhaust capacity air
Component-tested s DN 6 Safety valves serve to blow out non-poisonous and non flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only s that have
Series 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
Quick closing oil drain valve, type QDV 15 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Quick closing oil drain valve, type QDV 15 REFRIGERATION AND AIR CONDITIONING Technical leaflet Introduction QDV is a quick closing oil drain valve, designed particularly for draining oil from systems
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
Mark 608. Gas Pressure Regulators. Pressure Regulators Mark 608 Gas Pressure Regulators SPECIFICATIONS (3/4-1-1/4 ) FEATURES 3/4-1-1/4
Mark Gas Pressure Regulators 3/4-1-1/4 The MK Gas Pressure Regulator is the ideal valve for low pressure gas regulation. The self-contained low pressure gas regulator is for use on tank blanketing, gas
CASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
FULL FLOW GAS BALL VALVES: LONDON EN 331 APPROVED. GAS BALL VALVES
FULL FLOW GAS BALL VALVES: EN 331 APPROVED. GAS BALL VALVES 066 BALL VALVE, FULL FLOW SIZE PRESSURE CODE PACKING 1/4" (DN 8) 5bar/72,5psi 066B014 12/192 3/8" (DN ) 5bar/72,5psi 066B038 12/192 1/2" (DN
Two-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
FUTURGAS VALVES. Components Pz. Materials
UTURS VLVS 8 7 6 9 5 1 3 4 2 omponents Pz. Materials 1 ody 1 N 12165 W617N 2 nd connection 1 N 12165 W617N 3 all 1 N 12165 W617N 4 all seal 2 P.T... 5 Stem 1 N 12164 W614N 6 Rod seal O-Ring 2 NR 70 Sh
Blanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
Product Range. Product Range
Product Range Product Range EXCELLENT SOLUTIONS FOR COMPRESSED AIR With more than 30 years experience in pneumatic field, Aignep is an Italian leading manufacturer of compressed air elements. Aignep is
safety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
Pressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
Pressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
Seated valves VRB 3, VRG 3
Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations
Overview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
Shut-off valve Type QDV
Data sheet Shut-off valve Type QDV QDV is a shut-off valve, designed particularly for draining oil from systems containing refrigerant (ammonia) under pressure. The valve will close immediately on release
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
HIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
nile va25 valve WATER SERIES SCOPE SERVICE CONDITIONS COMPONENTS TECHNICAL SHEET 08/2012 IP19010 PAG. 1/6
WER SERIES QULIY Y RDIION nile va25 valve EHNIL SHEE 08/2012 IP19010 SOPE SERVIE ONDIIONS NILE series are manually operated metallic ball valves, by its design and raw materials are intended to be used
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
Features BALL VALVES. Hercules - High pressure Stainless steel ball valve - high ciclicity. General features. Special execution on request.
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
W68 Series Control Valves
Indianapolis hicago San Juan www.hollandapt.com 800-800-8464 W Series ontrol Valves W68 Series ontrol Valves pplication W68 valves are used in flow and pressure control applications. These valves are pneumatically
DN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
Universal Charging and Testing Unit FPU-1
1. DESCRIPTION 1.1. FUNCTION The charging and testing unit FPU-1 is used to charge accumulators with nitrogen or to check or to change the existing pre-charge pressure in accumulators. For this purpose
ZUERCHER MRCib Series
Pressure/Vacuum Rating Max inlet pressure: 16 bar Full Vacuum Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage rate C Control Spring
Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 differential pressure also 10 0.2 1 / 8 ¼ NPT 53.19
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve Application RA-DV straight version RA-DV is a series of pressure independent radiator valves, designed for use in 2-pipe heating systems together
Pressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
2/2-way proportional valve
2/2-way proportional valve High sensitivity Type can be combined with 0... 16 bar DN 0.8... 4 mm 1/8, 1/4 or sub-base EEx approvals optional Type 8605 Digital control electronics Cable plug version Type
Armatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
ADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
Safety. Operating instructions Manual valves AKT, flow adjusting cocks GEHV, GEH, LEH DANGER. Contents WARNING CAUTION. Changes to edition 03.
08 Elster GmbH Edition 09.8 Translation from the German 33000 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Manual valves, flow adjusting cocks GEHV, GEH, LEH Contents Manual
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
sil mla water meter valves
WTR SRIS QULITY Y TRITION sil mla water meter valves THNIL SHT 05/2017 IP09020 SOP SRVI ONITIONS SIL ML series are metallic ball valves manually operated that, due to their design are intended to be used
INSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
Electrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
Issue 1. Air Valves OUR GENIUS IS FITTINGS.
Issue 1 Air Valves OUR GENIUS IS FITTINGS www.wadefittings.com PART NUMBERING SYSTEM An explanation of the Wade part numbering system: Series; 6000, 6100, 6200, 6300 & 6500 Safety Relief Valves Wade Safety
ASK HEROSE HEROSE NEWS NEW! EXCLUSIVE STOCK GENERANT SDC SERIES FOR DOT-4LC AND TC-4LM LIQUID CYLINDERS SILENT OPENING LCV & POP ACTION CRV CALL NOW!
HEROSE NEWS CALL CLICK FOR EMAIL info@ WINTER 2015 / 2016 IN STOCK NOW! TAMPER PROOF DEVICE GENERANT SDC SERIES FOR DOT-4LC AND TC-4LM LIQUID CYLINDERS The connection system is supplied for installation
Differential pressure controller (PN 16) AVPL return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AVPL return mounting, adjustable setting Description It can be used on primary side of house substations for smaller systems such as one and two-family
Differential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
Solenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Pressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
NAF-Trimball Control Ball Valves
NAF-Trimball Control Ball Valves Size DN 50-500, Size 2-20 PN 10 40, ANSI Class 150 and 300 Fk 41.65(9)GB 11.04 Primary characteristics The NAF-Trimball represents an entirely new approach for addressing
excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES
excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES excellence of Italian engineering OUR MISSION: We started in 1960 as instrumentation manufacturers and we have increasingly specialized
Pressure Reducing Valve DMV 750
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Reducing Valve DMV 750 Advantages reduction
2-port and 3-port seat valves, PN16
s 4 47 VVI47 VXI47 CVTIX 2-port and 3-port seat valves, PN6 with internally threaded connections VVI47.. VXI47.. ronze valve body CC49K (Rg5) DN 5...5 k vs 2.5...4 m 3 /h Internally threaded connections
BERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
2-port and 3-port valves PN 16
OEM 2-port valves VVP459.10-0.63 to VVP459.25-6.3 3-port valves VXP459.10-0.63 to VXP459.25-6.3 3-port valves with bypass VMP459.10-0.63 to VMP459.20-4 2-port valves VVP459.25-6.3 to VVP459.40-25 3-port
Self-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve JIS version Application Pressure regulators for set points from 5 to 2800 kpa/0.05 to 28 bar Valve sizes ½B/15A to 4B/100A
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:
MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve
Differential pressure controller (PN 16) AHP - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use
Water valve Type WVO. Data sheet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Data sheet Water valve Type WVO Water valve type WVO is used for regulating the flow of water in refrigeration plant with water-cooled condensers. The water valve gives modulating
VALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 Pressure Reducing Valve PRV44 - Operation and Installation - 1 - manual PRV44-16-ENG JULY 2016 INDEX PAGE 1 IDENTIFICATION PLATE
Technical Information Ball valves for high pressure applications
Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve
Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve ANSI version Application Pressure reducing valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2 1) (DN
Combined Pressure / Vacuum Relief Valve KITO VD/o
KITO VD/o DN D H kg* vacuum setting (mbar) pressure DIN ANSI DIN ANSI min max min max** 50 PN 16 2 220 332 351 11 3 50 10 75 80 PN 16 3 260 367 387 145 3 50 10 70 100 PN 16 4 260 368 393 178 3 50 10 80
Safety. Operating instructions Manual valves AKT, flow adjusting cocks GEHV, GEH, LEH DANGER. Contents WARNING CAUTION. Changes to edition 06.
06 Elster GmbH Edition 09.6 Translation from the German 33000 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Manual valves, flow adjusting cocks GEHV, GEH, LEH Contents Manual
miño 2000 valve GAS SERIES SCOPE SERVICE CONDITIONS TECHNICAL SHEET 06/2015 IP10010 PAG. 1/6
GS SRIS miño 2000 valve THNIL SHT 06/2015 IP10010 SOP MIÑO series are manually operated metallic ball valves. The valves can not be dismantle, avoiding tampering of components in contact with gas, and
E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
Go to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)