INSTRUMENTATION VALVES
|
|
- Rafe Charles
- 5 years ago
- Views:
Transcription
1 INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series)
2 INSTRUMENTATION BALL VALVES INSTRUMENTATION BALL VALVES ONE PIECE INSTRUMENTATION BALL VALVES: Working Pressure: up to 3 psig (26 bar) Working Temperature: from 5 F to 15 F(1 C to 65 C) End Connections: 1/8" to 3/4" 2-Way and 3-Way Valves with On-Off & Switching Flow Paths ONE-PIECE INSTRUMENTATION BALL VALVES: Our Product: Truelok Ball Valves LC and HC Series are designed and manufactured for instrumentation and general industry. Our Ball valves are offered with seat all in one type, stainless steel body, and PTFE packing material. 9º actuation for 2 way and 18º actuation for 3 way ball valve. Truelok ball valves are designed to be operated in the fully closed or fully open position. Truelok Ball valves are available in variety of end connections, ranging from 1/8" to 3/4" Tube Fittings, Male NPT, and Female NPT. Flow coefficients (Cv) ranges from.2 to 6.3. Temperature rating range from 5 F to 15 F(1 C to 65 C) with a maximum working pressure up to 3 psig (26 bar) at 1 F(37 C).
3 INSTRUMENTATION BALL VALVES FEATURES: Simple design with one piece body and one piece ball stem to ensure alingment of stem and orifice Tight and smooth, low torque and easy operation Handle indicates flow direction Panel mountable 2-way straight, 2-way angle, and 3-way flow patterns TECHNICAL DATA: Temperature - Working Pressure Rating Series LC1 LC2 HC1 HC2 Temperature F ( C) 2-Way Straight Pattern 2-Way Angle Valve 3-Way Ball Valve 5 F to 15 F (1 C to 65 C) -65 F to 3 F (-53 C to148 C) 5 F to 15 F (1 C to 65 C) 5 F to 15 F (1 C to 65 C) 25 psig (172 bar) 3 psig (26 bar) 25 psig (172 bar) 25 psig (172 bar) 25 psig (172 bar) 25 psig (172 bar) 15 psig (13 bar) 15 psig (13 bar) 25 psig (172 bar) 25 psig (172 bar) 15 psig (13 bar) 15 psig (13 bar) Seat Material PTFE Flow data at 7ºF(2ºC) Flow Coefficient (Cv) (.68) 1.7(48) 2.3(65) 3.4(96) 4.(11) 5.6(15) 6.8(19) 7.9(22) 8.5(24) 9.(25) 1(28) 14(39) 16(45) 17(48) 18(5) 19(53) 22(62) 29(82) 34(96) 39(11) 43(12) 52(14) 68(19) 71(2) 72(2) 13(36) Pressure Drop to Atmosphere ( p), psi (bar) 5 (3.4) 1 (6.8) 1 (.68) 5 (3.4) 1 (6.8) Air Flow std ft3/min (std L/min) 4.5(12) 8.2(22) 6.(16) 11(31) 9.(25) 16(45) 1(28) 19(53) 15(42) 27(76) 18(5) 32(9) 21(59) 37(1) 22(62) 4(11) 24(67) 42(11) 27(76) 48(13) 36(1) 64(18) 42(11) 74(2) 45(12) 8(22) 48(13) 85(24) 51(14) 9(25) 6(16) 1(28) 78(22) 14(39) 9(25) 16(45) 1(28) 18(5) 11(31) 2(67) 14(39) 24(67) 18(5) 32(9) 19(53) 33(93) 19(53) 34(96) 36(1) 64(18) Water Flow U.S gal/min (std L/min).4(1.5).6(2.2).9(3.4) 1.1(4.1) 1.6(6.) 1.9(7.1) 2.2(8.3) 2.3(8.7) 2.5(9.4) 2.8(1) 3.8(14) 4.4(16) 4.7(17) 5.(18) 5.3(2) 6.3(23) 8.2(31) 9.5(35) 11(41) 12(45) 15(56) 19(71) 2(75) 2(75) 38(14) 1.(3.7) 1.4(5.2) 2.1(7.9) 2.4(9.) 3.5(13) 4.2(15) 4.9(18) 5.3(2) 5.6(21) 6.4(24) 8.5(32) 9.9(37) 11(41) 11(41) 12(45) 14(52) 18(68) 21(79) 25(94) 27(1) 33(12) 42(15) 45(17) 45(17) 85(32) 1.5(5.6) 2.(7.5) 3.(11) 3.5(13) 5.(18) 6.(22) 7.(26) 7.5(28) 8.(3) 9.(34) 12(45) 14(52) 15(56) 16(6) 17(64) 2(75) 26(98) 3(11) 35(13) 38(14) 46(17) 6(22) 63(23) 64(24) 12(45) Testing: Every valve is tested with Nitrogen at 1 psig (69 bar) for the seat performance. Maximum allowable leakage around the seat under this test condition is.1 std cc/min. Cleaning and Packaging: Every valve is cleaned and packaged in accordance with the Truelok standard specifications of cleaning and packaging procedures, P14 & P17.
4 INSTRUMENTATION BALL VALVES MATERIALS OF CONSTRUCTION: Handle Panel Nut Packing Adaptor Packing Ring Gland Packing Packing ARM Body Stem Retainer 1 / Retainer 2 Seat 1 / Seat 2 No Description Handle Panel Nut Packing Adaptor Gland Packing Packing Ring Packing ARM Seat1 / Seat2 Retainer1 Retainer2 Stem Body Material Grade / ASTM Specification Material Stainless Steel Nylon6 / ADC6 insert 34SS / A SS / A276 PTFE 316SS / A SS / A276 PTFE SS316L 316SS / A SS / A479 Packing Adjustment Valve Packing is set at 1 psig (69 bar) service at the factory. For service at pressure higher than 1 psig, the valve packing must be readjusted to prevent leakage. Before installation, valve packing exposed to environmental conditions may lose initial packing load, therefore, packing adjustment may be needed. For adjustment instruction, please refer to packing adjustment as follows: Procedure for Packing Adjustments: 1. Relieve the pressure from the system. 2. Remove residue from the valve by operating and closing the valve. 3. Remove the handle after loosening Set Screw. 4. Turn the Packing Bolt clockwise in 1/16-turn (22.5 ) 5. Reassemble the valve in reverse order. 6. Check the valve s operation after adjusting Packing Bolt and repeat this procedure until leak-tight. [ T H E M E A S U R A B L E D I F F E R E N C E ]
5 INSTRUMENTATION BALL VALVES DIMENSIONS: 2-Way Valve Series LC1 LC2 HC1 HC2 Truelok Ordering No. Part Number BV-S-2TF2TF BV-S-4TF4TF BV-S-2FN2FN BV-S-4TF4TF BV-S-6TF6TF BV-S-2FN2FN BV-S-4FN4FN BV-S-4MN4MN BV-S-4MN4TF BV-S-6TF6TF BV-S-4FN4FN BV-S-6FN6FN BV-S-8TF8TF BV-S-12TF12TF BV-S-8FN8FN Orifice Cv End Connections (in.) Straight Angle Inlet Outlet /8" TF /4"TF.5.3 1/8" Female NPT /4"TF /8"TF /8" Female NPT /4" Female NPT /4" Male NPT /4" Male NPT 1/4" TF /8" TF /4" Female NPT /8" Female NPT /2" TF /4" TF /2" Female NPT Dimensions (in.) A B C D E F G J H W *For angle patterns add A at the suffix of part number. BV-S-8FN8FN-3.5-A [ T H E M E A S U R A B L E D I F F E R E N C E ]
6 INSTRUMENTATION BALL VALVES DIMENSIONS: 3-Way Valve Truelok Ordering No. Series Part Number BV-S-2TF2TF-3W LC1 BV-S-4TF4TF-3W BV-S-2FN2FN-3W BV-S-4TF4TF-3W LC2 BV-S-4FN4FN-3W BV-S-4MN4TF-3W BV-S-6TF6TF-3W HC1 BV-S-4FN4FN-3W BV-S-6FN6FN-3W BV-S-8TF8TF-3W HC2 BV-S-12TF12TF-3W BV-S-8FN8FN-3W Orifice Cv End Connections (in.) Inlet Outlet /8" TF /4"TF.3 1/8" Female NPT.9 1/4"TF /4" Female NPT.8 1/4" Male NPT 1/4" TF 2. 3/8" TF /4" Female NPT 1.5 3/8" Female NPT 4.6 1/2" TF /4" TF 3.5 1/2" Female NPT Dimensions (in.) A B C D F G J H W ORDERING INFORMATION: BV-S-4TF4TF-3W-.9 BV= Ball Valve, S=SS, 4TF= 1/4" Tube Fitting, 3W= 3-Way, Cv=.9 Series Material Connection Size Connection Type Cv BV=Ball Valve S=Stainless Steel 316 2=1/8" 4=1/4" 6=3/8" 8=1/2" TF=Tube Fitting MN=Male NPT FN=Female NPT LC1/LC2 Series= HC1/HC2 Series=
7 INTEGRAL-BONNET NEEDLE VALVES INTEGRAL-BONNET NEEDLE VALVES INTEGRAL-BONNET NEEDLE VALVES: Compact Design Working Pressure: up to 5 psig (344 1 F(37 C) Working Temperature: from -65 F to 45 F(-53 C to 232 C) INTEGRAL-BONNET NEEDLE VALVES: Our Product: Truelok Needle Valves are designed and manufactured for instrumentation and general industry for application in the gas delivery system. Our standard LC and HC series are manufactured in SS 316 material, with PFA packing, phenolic handle, and regulating stem. Inlet/Outlet connections ranges from 1/8 to 3/4 with Flow Coefficient (Cv) range from.9 to 1.8. Maximum working Pressure is up to 5 psig (344 bar) and Temperature rating from -65 F to 45 F (-53 C to 232 C). Truelok Needle Valves are available in 2-way straight pattern and 2-way Angle. FEATURES: Panel Mountable Regulating Stem Variety of end connections Straight or Angle Pattern
8 INTEGRAL-BONNET NEEDLE VALVES TECHNICAL DATA: Temperature-Working Pressure Rating Material Temperature Rating, ºF (ºC) -65 (-53) to -2 (-28) -2 (-28) to 1 (37) 2 (93) 25 (121) 3 (148) 35 (176) 4 (24) 45 (232) 316SS Working Pressure, psig (bar) 5 (344) 5 (344) 4295 (295) 485 (281) 3875 (266) 3715 (255) 356 (245) 3435 (236) Temperature-Pressure Rating According to Packing Materials Packing Material PTFE PFA Temperature Rating F( C) -65 F to 45 F(-53 C to 232 C). -65 F to 45 F(-53 C to 232 C). Pressure Max. Temperature 3435 psig (236 bar) 3435 psig (236 bar) Caution: Packing adjustment may be required during the valve s service life. Valves that have not been cycled for a period of time may have a higher initial actuation torque. FLOW DATA AT 1 F (37 C): LC Series Vee and Soft-Seat Stem Regulating Stem HC Series Vee and Soft-Seat Stem Regulating Stem.7.6 Orifice.252in..252in Orifice.374in. Flow Coefficent (Cv) in..173in. Flow Coefficent (Cv) Orifice.374in..1.79in..79in Number of Turns open Number of Turns open Testing: Every valve is tested with Nitrogen at 1 psig (69 bar) for the seat performance. Maximum allowable leakage around the seat under this test condition is.1 std cc/min. Cleaning and Packing: Every valve is cleaned and packaged in accordance with Truelok standard specifications of cleaning and packaging procedures, P14 & P17. [ T H E M E A S U R A B L E D I F F E R E N C E ]
9 INTEGRAL-BONNET NEEDLE VALVES MATERIALS OF CONSTRUCTION: Handle Packing Nut Packing Gland Upper Packing Lower Packing Set Screw Gland SOFT SEAT STEM (Optional) Panel Nut Stem Body Lower Gland REGULATING STEM (Standard) VEE STEM (Optional) No. Description Material Material Grade / ASTM Specification STEM Body VEE Tip Regulating Tip Soft-Seat Tip Panel Nut Lower Gland Lower Packing Upper Packing Packing Gland Gland Packing Nut Set Screw Handle 316 SS / A SS/A SS 316 SS / A24 PFA / D337 PFA / D SS / A24, A276, B SS / A24, A SS / A276 Nickel cadmium-plated steel Phenolic with brass insert DIMENSIONS: Angle Pattern Straight Pattern
10 INTEGRAL-BONNET NEEDLE VALVES DIMENSIONS: Part Number NV-S-2TF2TF-.9 NV-S-2FN2FN-.9 NV-S-2MN2MN-.9 NV-S-2MN2TF-.9 NV-S-4TF4TF-.37 NV-S-2FN2FN-.37 NV-S-2MN2MN-.37 NV-S-4MN4MN-.37 NV-S-4MN4TF-.37 NV-S-6TF6TF-.73 NV-S-8TF8TF-.73 NV-S-4FN4FN-.73 NV-S-6MN6MN-.73 NV-S-4MN6TF-.73 NV-S-6MN6TF-.73 NV-S-6MN8TF-.73 NV-S-4MN4FN-.73 NV-S-8TF8TF-1.8 NV-S-12TF12TF-1.8 NV-S-6FN6FN-1.8 NV-S-8FN8FN-1.8 NV-S-8MN8MN-1.8 NV-S-8MN8FN-1.8 Orifice End Connections Cv (in.) Inlet Outlet 1/8" TF 1/8" Female NPT /8" Male NPT 1/8" Male NPT 1/8" TF /4" TF 1/8" Female NPT 1/8" Male NPT 1/4" Male NPT 1/4" Male NPT 1/4" TF /8" TF 1/2" TF 1/4" Female NPT 3/8" Male NPT 1/4" Male NPT 3/8" TF 3/8" Male NPT 3/8" TF 3/8" Male NPT 1/2" TF 1/4" Male NPT 1/4" Female NPT /2" TF 3/4" TF 3/8" Female NPT 1/2" Female NPT 1/2" Male NPT 1/2" Male NPT 1/2" Female NPT Dimensions (in.) A B1 B2 C D E F G H *For angle patterns add A at the suffix of part number. NV-S-2TF2TF-.9-A ORDERING INFORMATION: NV-S-4TF4TF-.37 NV= Needle Valve, S=SS, 4TF= 1/4" Tube Fitting, Cv=.37 Series Material Connection Size Connection Type CV NV=Needle Valve S=Stainless Steel 316 2=1/8" 4=1/4" 6=3/8" 8=1/2" 12=3/4" TF=Tube Fitting MN=Male NPT FN=Female NPT LC Series HC Series [ T H E M E A S U R A B L E D I F F E R E N C E ]
11 TOGGLE VALVES TOGGLE VALVES (TG Series) TOGGLE VALVES: Maximum Working Pressure: 3 psig (2.6 1ºF(37ºC) Working Temperature Range: -2 F(-28 C) to 2 F(93 C) Straight and Angle Body Patterns SS 316 Body Material FEATURES: Compact Design Open and Closes Quickly Variety of End Connection: Tube Fitting, Male NPT, Female NPT Straight or Angle Pattern Flow Coefficient (Cv) from.11 to.7 TECHNICAL DATA: Series Orifice in. TG1.79 TG2.126 TG3.252 *Rating based on manual valve. DIMENSIONS: Straight Pattern Temperature Rating ºF (ºC) -2 to 2 (-28 to 93) Working Pressure psig(bar) 3(2.6) 2(13.7) Angle Pattern
12 TOGGLE VALVES DIMENSIONS: Ordering No. Series Part Number VT-S-2TF-2TF TG1 VT-S-2MN-2MN VT-S-2MN-2TF VT-S-4TF-4TF VT-S-2FN-2FN VT-S-2MN-2MN TG2 VT-S-4MN-4MN VT-S-4MN-4TF VT-S-2MN-2FN VT-S-6TF-6TF VT-S-8TF-8TF TG3 VT-S-4FN-4FN VT-S-6MN-6MN Orifice End Connections Cv in. Inlet Outlet 1/8" TF /8" Male NPT 1/8" Male NPT 1/8" TF 1/4" TF 1/8" Female NPT /8" Male NPT 1/4" Male NPT 1/4" Male NPT 1/4" TF 1/8" Male NPT 1/8" Female NPT 3/8"TF /2" TF 1/4"Female NPT 3/8"Male NPT MATERIALS OF CONSTRUCTION: Dimensions (Inches) A B B1 C D E G *For angle patterns add A at the suffix of part number. VT-S-2TF2TF-.11-A H Testing: Every valve is tested with Nitrogen at 2 psig (13.7 bar) for the seat performance. Required standard is no detectable leakage with a liquid leak detector. Cleaning and Packaging: Every valve is cleaned and packaged in accordance with Truelok standard specifications of cleaning and packaging procedures, P14 & P17. ORDERING INFORMATION: VT-S-4TF4TF-.2 VT=Toggle Valve, S=SS, 4=1/4, TF=Tube Fitting, Cv=.2 No Description Body Stem O-Ring Spring Packing Nut Washer Roll Pin Handle Panel Nut Stem Tip Series (Orifice Size) Material Connection Size Connection Type Flow Pattern TG1 (.79") TG2 (.126") TG3 (.252") S=Stainless Steel 316 2=1/8" 4=1/4" 6=3/8" 8=1/2" TF=Tube Fitting MN=Male NPT FN=Female NPT A=2 Way Angle Blank=2-Way Straight (Standard) Material Material Grade/ASTM Specification 316 SS/A SS/A276 Fluorocarbon FKM 631 SS PTFE Coated 316 SS/A276 Nylon 34 SS Nylon 34 SS/A276 PTFE [ T H E M E A S U R A B L E D I F F E R E N C E ]
13 CHECK VALVES CHECK VALVES (CHV Series: For General Industry) CHV SERIES: Maximum Working Pressure: up to 6 psig (413 1 F(37 C) Cracking Pressure: 1/3 psi (.3 bar) to 25 psi (1.8 bar) Working Temperature Range: -1 F(-23 C) to 375 F(19 C) FEATURES: Stainless Steel Construction Poppet Design TECHNICAL DATA: Temperature- Working Pressure Rating In-Line Design Variety of End Connections Fixed Cracking Pressure Series Temperature, ºF ( C) -1(-23) to 1 (37) CHV1 CHV2 CHV3 Working Pressure, psig (bar) Working Pressure, psig (bar) 6 (413) 5 (344) -1(-23) to 2 (93) -1(-23) to 25 (121) -1(-23) to 3 (148) -1 (-23) to 375 (19) Cracking and Reseal Pressures at 7 F (2 C) 516 (355) 491 (338) 466 (321) 428 (294) 429 (295) 48 (281) 3875 (266) 356 (245) Nominal Cracking Cracking Pressure Reseal Pressure Pressure psi (bar) Range psi (bar) psi (bar) 1/3 (.3) Up to 3 (.21) Up to 6 (.42) back pressure Cracking Pressure psi (bar) 1 (.7) 5 (.35) Up to 4 (.28) 3 to 9 ( ) Up to 5 (.35) back pressure Up to 2 (.14) back pressure 1 (.69) 7 to 15 (.49 to 1.1) 3 (.21) or more upstream pressure 25 (1.8) 2 to 3 (1.4 to 2.1) 17 (1.2) or more upstream pressure Cracking Pressure: The inlet pressure at which the first indication of flow occurs Reseal Pressure: The pressure at which there is no indication of flow Back Pressure: The differential pressure between the inlet and outlet pressures Caution: For valves not actuated for a period of time, initial cracking pressure may be higher than the set cracking pressure.
14 CHECK VALVES FLOW DATA AT 7 F (2 C) CHV Series Nominal Cracking Pressures 1 psi (.7bar) 1 psi (.69bar) 25 psi (1.8 bar) AIR CHV1 Inlet Pressure, psig Air Flow, std L/min CHV Air Flow, std ft 3 /min Air Flow, std L/min Inlet Pressure, bar WATER CHV1 Pressure Drop, psi CHV2 Water Flow, L/min Water Flow, U.S. gal/min Water Flow, L/min Pressure Drop, bar Inlet Pressure, psig Inlet Pressure, bar Pressure Drop, psi Pressure Drop, bar CHV Air Flow, std ft 3 /min Air Flow, std L/min CHV Water Flow, U.S. gal/min Water Flow, L/min Inlet Pressure, psig Inlet Pressure, bar Pressure Drop, psi Pressure Drop, bar Air Flow, std ft 3 /min Water Flow, U.S. gal/min Testing: Every valve is factory tested for functionality at the relevant cracking and reseal pressure. Cleaning and Packing: Every valve is cleaned and packaged in accordance with Truelok standard specifications of cleaning and packaging procedures, P14 & P17. [ T H E M E A S U R A B L E D I F F E R E N C E ]
15 CHECK VALVES MATERIALS OF CONSTRUCTION: No. Description Material Material Grade/ ASTM Specification 1 Inlet Body 316 SS/A479 2 Outlet Body 316 SS/A479 FLOW 3 4 Poppet Assembly Poppet Stoper FKM- bonded 316 SS/A SS/A276 5 O-Ring Fluorocarbon FKM 6 Backup Ring PTFE 7 Spring 316 SS/A479 DIMENSIONS: HEX. B HEX. B HEX. B HEX. B A CHV1 SERIES A CHV2 / CHV3 SERIES Type End Connections Orifice Inches Cv Series Connection Inlet Outlet CHV1 2TF 4TF 4FN 2MN 4MN 6TF 8TF /8" TF 1/4" TF 1/4" Female NPT 1/8" Male NPT 1/4" Male NPT 3/8" TF 1/2" TF CHV2 6FN 3/8" Female NPT FN 1/2" Female NPT 6MN 8MN 12TF 16TF 3/8" Male NPT 1/2" Male NPT 3/4"TF 1" TF CHV3 12FN 3/4"Female NPT FN 1" Female NPT 12MN 16MN 3/4" Male NPT 1" Male NPT Pressure Rating psig 1ºF(37ºC) 6 (413) 6 (413) 53 (365) 49 (337) 6 (413) 5 (344) 47 (324) 46 (316) 44 (33) 5 (344) Dimensions Inches A B / / / ORDERING INFORMATION: CHV1-S-4TF-1 CHV1=Valve Series, S=SS, 4TF= 1/4 Tube Fitting, 1= Cracking Pressure Series (Orifice Size) Material Connection Size Connection Type Cracking Pressure CHV1 (.19") CHV2 (.31") CHV3 (.6") S=Stainless Steel 316 2=1/8" 4=1/4" 6=3/8" 8=1/2" TF=Tube Fitting MN=Male NPT FN=Female NPT MFS=Face Seal 1/3 psi=1/3 1 psi=1 5 psi=5 1 psi=1 25 psi=25
16 RELIEF VALVES Relief Valves (RVL/RVH Series) RVL/RVH SERIES Maximum Working Pressure: RVL Series: 3 psig (2.6 1 F (37 C) RVH Series: 6psig (42 1 F ( 37 C) Working Temperature Range: 1 F (-12 C) to 3 F (148 C) Set Pressure: RVLSeries: 1 psig (.68 bar) to 225 psig (15.5 bar) RVH Series: 5 psig (3.4 bar) to 6 psig (413 bar) Connections: 1/4 and 1/2 FEATURES: RVL Series (Low-Pressure Valves) Service up to 3 psig (2.6 bar) Installed spring is for the full set pressure range RVH Series (High-Pressure Valves) Service up to 6 psig (413 bar) Multiple springs for a selection of set pressure ranges. Refer to set pressure rating and symbols below TECHNICAL DATA: Temperature - Working Pressure Rating Series Working Pressure at 7 F (2 C) RVH1 6 psig (413 bar) RVH2 6 psig (413 bar) RVL1 and RVL2 3 psig (2.6 bar) Set Pressure 5 to 6 psig (3.4 to 413 bar) 5 to 15 psig ( 3.4 to 13 bar) 1 to 225 psig (.68 to 15.5 bar) Outlet Pressure Seal Material Temperature, F (C) 15 psig (13 bar) FKM 25 psig (172 bar) FKM Maximum Set Pressure, psig, (bar) 225 psig (15.5 bar) FKM 1 (-12) 25 (-4) 3 (-1) 5 (1) 6 (413) 225 (15.5) 15 (65) 2 (93) 25 (121) 275 (135) 3 (148) 558 (384) 516 (355) 491 (338) 15 (13) *Outlet pressure should not exceed inlet pressure
17 RELIEF VALVES TECHNICAL DATA: Set Pressure Rating To obtain good pressure settings over the entire pressure range, the entire pressure range is sub divided into 8 pressure ratings. A pressure rating corresponds to a certain spring, which can be used for setting a maximum pressure, is referred below. No. A B C D E F G H MATERIALS: Spring Designator Spring Color Blue Yellow Purple Orange Brown White Red Green RVL Series (Low-Pressure Valves): psig 5 to to to to to 3 3 to 4 4 to 5 5 to 6 Set Pressure bar 3.4 to to to to to to to to 413 Mpa.34 to to to to to to to to 41.3 Set Pressure and Resealing Pressure Set pressure is the upstream pressure at which the first indication of flow occurs. Set pressure of each valve after initial relief is repeatable within o ± 3. psig (.2 bar) or ± 5 % (whichever is greater) of the initial set pressure at 6 to 8 F (15 to 26 C) o ± 6. psig (.4 bar) or ± 2 % (whichever is greater) of the initial set pressure below 6 F (15 C) and above 8 F (26 C). Resealing pressure is the upstream pressure at which there is no indication of flow. Resealing pressure is always lower than set pressure. Testing Cleaning and Packaging Every valve is factory tested for functionality at the relevant cracking and resealing performance. Every valve is cleaned and packaged in accordance with Truelok standard specifications of cleaning and packaging procedures, P14 & P17. RVH Series (High-Pressure Valves): RVL Series (Low-Pressure Valves): No Material Grade/ ASTM Specification No. Material Grade/ ASTM Specification Description Material Description Material Body 316SS/A182 8 Bonnet 316SS/A479 Gasket 316SS/A24 9 O-Ring FKM Seat 316SS/A479 1 Lock Nut 316SS/A276 Disc Ass'y 316SS/AA479+FKM 11 Cap 316SS/A479 Retainer RVL1 Series 34SS/A Plug Nylon6 RVL2 Series 316SS/A Sleeve 34SS/A479 X-Ring FKM 14 Spring S177ss/AMS 5678 Stern 316SS/A Spring Support 316SS/A276
18 RELIEF VALVES MATERIALS: RVH Series (High-Pressure Valves): No Material Grade/ ASTM Specification No. Material Grade/ ASTM Specification Description Material Description Material Body 316SS/A182 8 Bonnet 316SS/A479 Insert 316SS/A479 9 O-Ring FKM O-Ring FKM 1 Lock Nut 316SS/A276 Seat Retainer 316SS/AA Cap 316SS/A479 Retainer RVH1 Series 34SS/A666 RVH2 Series 316SS/A Plug Nylon6 X-Ring FKM 13 Spring S177ss/AMS 5678 Stern 316SS/A Spring Support 316SS/A276 Adjustment of Pressure Relief Valve Make sure there is no pressure in the system and purge the installed relief valve before performing the maintenance. Break and remove the pressure tag wire Unscrew the lock nut and remove the cap from the bonnet Remove the included spring and spring support Check that all parts are celan Insert the spring support from the top of the bonnet Mount proper spring for the desired pressure range Remove the label from the cap and affix a new one, Make sure the desired pressure falls within the range shown on the table Screw in the cap to the bonnet by the Number of times to turn the cap. Then tighten the lock nut and test the set pressure. To adjust the set pressure, remove the pressure from the system and loosen the lock nut. Then, make adjustment while checking the blowout pressure until the desired level is reached. Tighten the lock nut by the torque of 11.3N-m After final adjustment of the pressure, lock the cap and body with wire DIMENSIONS
19 RELIEF VALVES DIMENSIONS RVL Series (Low-Pressure Valves): Ordering Number Orifice End Connection Dimensions Inches Series Part No. Inches Inlet Outlet A B C D E RVL1 RVL2 4TF 1/4" TF MN 4TF.189 1/4" Male NPT 1/4" TF MN 4NF 1/4" Male NPT 1/4" Female NPT TF 1/2"TF MN 8TF.252 1/2" Male NPT 1/2" TF MN 8FN 1/2" Male NPT 1/2" Female NPT 1.43 RVH Series (High-Pressure Valves): Ordering Number Orifice End Connection Dimensions Inches Series Part No. Inches Inlet Outlet A B C D E RVH1 RVH2 4TF 1/4" TF MN 4TF.142 1/4" Male NPT 1/4" TF MN 4NF 1/4" Male NPT 1/4" Female NPT TF 1/2"TF MN 8TF.252 1/2" Male NPT 1/2" TF MN 8FN 1/2" Male NPT 1/2" Female NPT 1.43 Application Notes: Truelok pressure relief valves are not certified to ASME boiler and pressure vessels code safety relief devices or any other ASME code. Pressure relief valves open when pressurized vessel or system pressure reaches beyond the set pressure and closes when system pressure falls below the set pressure. For valves not actuated for a period of time, initial relief pressure may be higher than the set pressure. ORDERING INFORMATION: RVH1-S-4TF-A RVH1 = Relief Valve RVH1 Series, S = SS 316L Body Material, 4TF = ¼ Tube Fitting, A = Set Pressure Range 5-35psi Valve Series Spring Specifications (Orifice Size) Material Connection Size Connection Type Set Pressure Range Spring Color RVL1:.189" S=Stainless 8=1/2" TF=Tube Fitting 5 to 35psi Blue RVH1 :.142" Steel 316 4=1/4" MN=Male NPT 35 to 75psi Yellow RVL2 & RVH2:.25" FN=Female NPT 75 to 15psi Purple 15 to 225 psi Orange 225 to 3psi Brown 3 to 4psi White 4 to 5psi Red 5 to 6psi Green *No spring /set pressure designator is required for RVL, low pressure series Designator A B C D E F G H [ T H E M E A S U R A B L E D I F F E R E N C E ]
20 Truelok Valves and Fittings A business unit of cmax-2, Inc E. Jurupa St., Unit 114, Ontario, CA USA Ph: Fax: sales@truelok.us Website:
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationINDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
More informationHIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
More informationProportional Relief Valves
Proportional Relief ValvesR Series 1 www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationOperation Manual Piston Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:
More informationHigh-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationexcellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES
excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES excellence of Italian engineering OUR MISSION: We started in 1960 as instrumentation manufacturers and we have increasingly specialized
More informationGo to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationTHE BP-690 SERIES. Operating and Service Manual. Series includes all variants of BP-LF/MF-690/691
THE BP-690 SERIES Operating and Service Manual Series includes all variants of BP-LF/MF-690/691 Issue B April 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationLRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationRHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationCRYOGENIC SERIES Regulators, Pressure Gauges, Shut-off Valves, Relief Valves Technology for a Better Future
www.genstartech.com Regulators, Pressure Gauges, Shut-off Valves, Relief Valves CRYOGENIC SERIES Technology for a Better Future GENTEC CRYOGENIC SERIES Cryogenic Shut-off Valves Cryogenic Relief Valves
More informationProduct Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction
Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS
More informationINSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator
INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As
More informationTHE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
More informationRHPS Series PRV 6 User Manual
RHPS Series PRV 6 User Manual Read the complete manual before installing and using the valve. 1 WARNING Before removing a valve from the system for service, you must depressurize system purge the system
More informationSpecialty Products. Specialty Products Index
Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.
More informationTHE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)
THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Instrument Supply Pressure System Model WIC The information in this manual has been carefully checked for accuracy and is intended to be used as a
More informationType ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More information1800C and 1800C-HC Series Service Regulators
1800C and 1800C-HC Series Service Regulators Installation Instructions www.elster-americanmeter.com General Information: The 1800C and 1800C-HC Regulators are available as Full Capacity Internal Relief
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationRS(H)20, 25 USER MANUAL
RS(H)20, 25 USER MANUAL Read the complete manual before installing and using the regulator. WARNING Before removing a regulator from the system for service, you must depressurize system purge the system
More information1301 Series High-Pressure Regulators
Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More informationRD(H)20/25 Pressure-Reducing Regulator User Manual
RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be
More informationType S301 & S302 Gas Regulators INTRODUCTION INSTALLATION. Scope of Manual. Description. Specifications. Type S301 and S302. Instruction Manual
Fisher Controls Instruction Manual Type S301 & S302 Gas Regulators October 1981 Form 5180 WARNING Fisher regulators must be installed, operated, and maintained in accordance with federal, state, and local
More informationDS05C,D,G Dial Set Pressure Regulating Valves
DS05C,D,G Dial Set Pressure Regulating Valves APPLICATION The Honeywell DS05C,D,G Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationTechnical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
More information299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
More informationMERCER VALVE SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9500 SERIES Pilot Operated THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9500 Series Pilot Operated Product Overview The 9500 Series Safety Relief Valves are State of the
More informationSmooth Vent Valve. Series XVD XL XL Q D- XVD XGT CYV
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationOperation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
More information1805 Series Relief Valves
Instruction Manual Form 1211 1805 Series October 2011 1805 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion
More informationHigh Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
More informationWelker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More informationROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
More informationFOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
More informationAvenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationSmooth Vent Valve. XVD Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationRHPS Series PRV 2 all types of connections User Manual
RHPS Series PRV 2 all types of connections User Manual Read the complete manual before installing and using the valve. Before removing a valve from the system for service, you must depressurize system
More information2.0 INSTALLATION & SERVICE
Installation, Operation, and Maintenance Instructions MODEL 5600 / 5600R January 2005 CONTENTS 1.0 GENERAL 1.1 5600 Model Number Information -----------------------------------------------------------------------
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationHydraulic Piston Accumulators
Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed
More information64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationInstruction Manual Pressure Relief Valve and Rupture Disc Chlorine or Sulfur Dioxide, Series 869
Instruction Manual Pressure Relief Valve and Rupture Disc Chlorine or Sulfur Dioxide, Series 869-1 - 115.6020.15 These instructions describe the installation, operation and maintenance of the subject equipment.
More informationPOP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
More informationType ACE95jr Tank Blanketing Valve
Instruction Manual Form 5666 Type ACE95jr 04/01 Type ACE95jr Tank Blanketing Valve W8157 Introduction Scope of Manual Figure 1. Type ACE95jr Tank Blanketing Valve This instruction manual provides installation,
More information1200B2 Series Service Regulators. Instruction Manual
00B Series Service Regulators Instruction Manual 00B Series Service Regulators 0 Elster American Meter 00B Series Service Regulators General Information The 00B Series Service Regulators are available
More informationHigh Pressure Check Valves
High Pressure heck Valves Pressures to 60,000 psi (4137 bar) O-Ring heck Valves Minimum operating temperature for standard o-ring check valves 0 F (-17.8 ). For low temperature option to -423 F (-252 )
More informationSmooth Vent Valve XVD. Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationInstallation, Operation, and Maintenance Manual. Welker Constant Pressure Cylinder With Solid Indicator (Non-mixer) Model CP-30SI
Installation, Operation, and Maintenance Manual Welker Constant Pressure Cylinder With Solid Indicator (Non-mixer) Model The information in this manual has been carefully checked for accuracy and is intended
More information61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
More informationInstallation Instructions
48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationType CT88 Backpressure Regulator
Instruction Manual Type CT88 July 2016 Type CT88 Backpressure Regulator Table of Contents Introduction...1 Specifications...2 Principle of Operation...2 Installation...3 Overpressure Protection...4 Startup...4
More informationLRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
More informationrelief valves Circle Seal Controls 2301 Wardlow Circle Corona, CA Phone (951) Fax (951)
Available in low, medium, high and extra high pressure models, R6000 right angle relief valves provide users with high accuracy and consistency of cracking and reseat pressures. Furthermore, narrow pressure
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationModels 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Probe Instrument Regulator Model The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationMEGR-1627 Instruction Manual
MEGR-1627 HIGH FLOW GAS REGULATOR Instruction Manual- Look Inside For: Description Installation Remote Vent Line Installations Startup and Adjustment Shutdown Maintenance Body Maintenance Procedures Diaphragm
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationTHE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
More informationTECHNICAL DATA. Pressure Regulation 531a. April 24, 2009
April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
More informationOperating Instructions Model and Hydrostatic Test Pump
Operating Instructions Model 39300 and 39301 Hydrostatic Test Pump Dimension Weight Pump Style Capacity Pressure Motor Lubrication Control Gauge Inlet Connection Outlet Connection Discharge Hose Hose Ends
More informationB34 Series Regulator Commercial and Industrial Regulator
B34 Series Regulator Commercial and Industrial Regulator Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the B34 is particularly
More informationHalsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP!
Halsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP! PLEASE READ THE FOLLOWING INFORMATION. ITALLATION ITRUCTIO FOR THE 4410FR FTN. WITH 97243C SINGLE VALVE CONTROL ASSEMBLY ARE LOCATED
More informationRegulator from 1800 B series
Regulator from 1800 B series Regulator from 1800 B series Measuring of industrial gases frequently requests a precise pressure regulation for the purpose of dosage and proccesing. UNIS FAGAS has two kinds
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
More informationPILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and
More informationNeedle valve. Contents. User s Manual. (1) Be sure to read the following warranty clauses of our product 1. (2) General operating instructions 2
Serial No. H-V024-E-7 Needle valve User s Manual Contents (1) Be sure to read the following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instructions for transportation,
More informationReduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections
Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Features General application The RP03 provides protection from both backsiphonage and backpressure
More informationSeries C8/CR Cryogenic
Triac C8/CR Series 3-Piece Ball feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live loaded packing system is accomplished with Belleville
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More information1305 Series Pressure Reducing Regulators
Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationANDERSON GREENWOOD SERIES 9000 POSRV INSTALLATION AND MAINTENANCE INSTRUCTIONS
Procedure-assembly-functional test and performance requirements 1 SCOPE 1.1 This document establishes the general procedure for assembly, functional testing and normal performance requirements of low Series
More informationACCESSORY KIT INSTALLATION INSTRUCTIONS
ACCESSORY KIT INSTALLATION INSTRUCTIONS 1NP0680 - PROPANE CONVERSION FOR USE WITH MODELS: PM8, PC8, PM9, PC9, FL9M, FL9C, FC9M, FC9C This conversion kit is to be installed by a qualified service agency
More information