SERIES M a x i m u m f l o w t o 0 0 l / m i n
Technical data MRS 116 165 166 Filter housing (Materials) Head: luminium over: Nylon (MRS 116) luminium (MRS 165166) owl: Nylon Filter housing (Materials) Head: luminium Housing: Steel ataphoresis Painting ypass valve: rass luminium MRS 116 165 166 Pressure Working pressure: 10 bar Pressure Working pressure: 80 bar (8 MPa) Test pressure: 10 bar (1 MPa) urst pressure: 80 bar (8 MPa) Pulse pressure fatigue test: 1.000.000 cycles with pressure from 0 to 80 bar (8 MPa) Temperature From 5 to +110 Δp Elements RS: 10 bar (MRS) U: 0 bar (LMP) Oil flow from exterior to interior. Seals Standard NR Optional FPM series series V Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportionally with density. Δp bar Δp bar 1,0 0,8 0,4 0 1,50 1,00 0,5 0 MRS 116 Δp Housing 0 4 48 7 96 10 Flow rate l/min MRS 165 Δp Housing 0 60 10 180 40 00 Flow rate l/min Valves ypass valve pressure drop Weights (kg) Length 1 4 MRS 116 1,0 1,40 MRS 165,40,80 4,10 MRS 166,40,80 4,10 1,70 1,90,0,70 Volumes (dm ) Length 1 4 MRS 116 0,80 1,00 MRS 165,00,60,00 MRS 166,00,60,00 0,75 0,81 1,11 1,5 MRS LMP ompatibility (to ISO 94) Mineral oils Synthetic fluids iodegradable fluids Δp bar Δp bar 6 4 0 6 4 MRS 116 0 4 48 7 96 10 Flow rate l/min MRS 165 0 0 60 10 180 40 00 Flow rate l/min
Filter sizing 8 Δp Housing Sizing data for single cartridge, head at top Δp bar Valves ypass valve pressure drop Δp bar 6 4 0,00 1 9 6 0 > > 0 40 80 10 160 00 Flow rate l/min 0 40 80 10 160 00 Flow rate l/min Δp Tot. Δpc Filter housing Δpe Filter element Y Multiplication factor (see below) Q l/min = flow rate V1 = reference viscosity 0 mm /s (cst) V = operating viscosity in mm /s (cst) Δp Tot. = Δpc + Δpe Δpe = Y : 1000 x Q x (V/V1) alculation example with HLP Mineral Oil Variation in viscosity Data: Filter with inline connections Pressure = 6 bar Flow rate = 00 l/min Viscosity = 46 mm /s (cst) Density = 0,86 Kg/dm Filtration = 10 μ absolute With bypass valve Practical example Δpe Filter housing Q = 00 l/min V = 46 mm /s (cst) Pmax = 6 bar Filtration = 10 μ absolute Δp Tot. max = 0,4 bar (max. recommended value) Δpe = (1,4 : 1000) x 00 x (46/0) = 0,7 bar Δpc Filter housing Q tot = 00 l/min Q1 to the tank = 150 l/min Q to the pump = 50 l/min Filter type MRS 165 (see below housings pressure drop) Δp Tot. max 1 1,6 bar = Δpc + Δpe Δp Tot. = 0,59 (Q1) + 0,7 = 0,96 bar Multiplication factor Y for definition of the pressure drop of filter elements. Sized filter type: MRS 165 F G1 0 10 S P01 Reference viscosity 0 mm /s Filter Element Type U 110 1 4 RS 116 1 RS 165 1 b s o l u t e F i l t r a t i o n N Series 1 0 1 6 5 8,754 6,111 5,066,798 5,1,,06 1,4 0,94 8,14 6,04 4,066,58 4, 1,87 1,75 1,05 0,86 5,875 4,155,97 1,14,85 1, 1,46 0,96 0,61 Δp bar 1,50 1,00 0,5 0 MRS 165 Δp Housing 0 60 10 180 40 00 Flow rate l/min
Hydraulic schemes 1 Filter element ackpressure valve: opening pressure 0,5 bar ±10% ypass valve: opening pressure,5 bar ±10% LEGEND 4 Depressurization valve 5 ntiavitation valve 6 Safety filter element (wire mesh 60 μm) MRS 116 Valves option Valves option Valves option Valves D option Valves E option Valves F option Valves G option Valves H option MRS 165 166 Valves option Valves option Valves option Valves D option Valves E option Valves F option Valves G option Valves H option 4
Por t configuration MRS 116 MRS 165 MRS 166 D1 D D1 D 1 D1 Thread connections ode MRS 116 x x G1 0 xxx x P01 MRS 116 x x G 0 xxx x P01 MRS 116 x x G 0 xxx x P01 MRS 116 x x G4 0 xxx x P01 MRS 116 x x G5 0 xxx x P01 MRS 116 x x G6 0 xxx x P01 () G /4 /4 NPT SE 1 SE 16 () 1 () () D1 () G /4 /4 NPT SE 1 SE 16 D () T (Indicator port) G 1/8 G 1/8 MRS 165 x x G1 0 xxx x P01 MRS 165 x x G 0 xxx x P01 MRS 165 x x G 0 xxx x P01 MRS 165 x x G1 1 xxx x P01 MRS 165 x x G 1 xxx x P01 MRS 165 x x G 1 xxx x P01 G 1 1/4 1 1/4 NPT SE 0 G 1 1/4 1 1/4 NPT SE 0 G 1 1/4 1 1/4 NPT SE 0 SE 16 SE 16 SE 16 SE 16 G 1/8 G 1/8 MRS 166 x x G1 1 xxx x P01 MRS 166 x x G 1 xxx x P01 MRS 166 x x G 1 xxx x P01 G 1 1/4 1 1/4 NPT SE 0 SE 16 SE 16 SE 16 SE 16 G 1/8 Hydraulic schemes Style D E F Style Style E Style G Pump Return Tank Style G H Style D Style F Style H Tank Return Pump 5
Dimensions MRS 116 70 4 4 H1 D1 T Return Line Indicator port 105 56 /F 41 H 9 Ø 7 Ø 56 1 9 Seat for Nylon exstension tube with fast lock T Suction Line Indicator port /F 6 R 5,5 11 18 Holes on the tank MRS 116 Filter H Length mm 1 0 6 H1 mm 40 00 Ø 74 M10 See page 5 to choose thread connections 114 116 6
MRS 165 T Return Line Indicator port 5 5 T Suction Line Indicator port D1 64 D H1 1 5 85 8 5 80 Ø 100 Flat gasket H M50 x 90 86 85 Holes on the tank M10 90 Ø 101 86 90 /F 1 Ø 164 166 MRS 165 Filter H Length mm 1 67 75 44 H1 mm 0 40 500 See page 5 to choose thread connections 7
MRS 166 T Return Line Indicator port 5 5 T Suction Line Indicator port D1 64 D H1 10 8 5 77 Ø 100 ORing Holes on the tank 85 M10 Ø 101 17 H M50 x 1 90 86 90 5 /F 1 Ø 164 166 MRS 166 Filter H Length mm 1 70 78 445 See page 5 to choose thread connections 8 H1 mm 0 40 500
Indicator 8 port 0 4 7 87 55 D 1 0 8 60 0 50 Min. 70 H 9 Length Filter 1 4 H mm 18 15 65 65 Type F onnection SE 16 Fixing holes D M10 x depth 1 mm /8 UN x depth 1 mm 9
Ordering information MRS 116 165 166 Filter assembly MRS RS 1 4a 5 6 Example 1: MRS 116 1 G1 0 16 S P01 Example : MRS 165 G 0 10 S P01 Example : MRS 166 G G 1 5 S P01 Filter element 1 7 4b Example 1: RS 116 1 16 P01 Example : RS 165 10 P01 Example : RS 165 5 P01 9 7 8 9 1 Size Filter 116 116 165 165 166 165 Filter length Valves option D E F G H Filter element 116 1 165 1 166 1 4 Seals 4a Filter assembly V D See page 4 for Hydraulic schemes NR ORing on head NR Flat gasket on head FPM ORing on head FPM Flat gasket on head 4b Filter element V NR FPM 5 Standard connections MRS 116 G1 G4 G G5 G G6 6 dditional connections 7 Filter element 10 16 5 8 Style S 9 Option P01 Pxx Inorganic microfibre 10 μ Inorganic microfibre 16 μ Inorganic microfibre 5 μ Standard See page 5 to choose threaded connections MRS 165 166 G1 See page 5 to choose G threaded connections G 0 (Not available for MRS 166) 1 (Not available for MRS 116) See page 5 to choose threaded connections MP Filtri standard On request bsolute filtration Inorganic Microfibre ßx (c) 1000 Suitable for tank sidewall mounting applications (only for valves option E F) 10 MP Filtri The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved.
Filter assembly LMP Ordering information 1 4 5 6 7 8 9 Example: 10 N P01 Filter element U110 7 4 8 9 Example: U110 10 N P01 1 Size Filter Filter element 14 110 Filter length 1 4 Valves option 6 Indicator port 1 No Port G 1/8 switch For pressure switch Port G 1/4 For pressure switch 4 Differential indicator port 7 Filter element 10 16 5 Inorganic microfibre 10 μ Inorganic microfibre 16 μ Inorganic microfibre 5 μ bsolute filtration ßx (c) 1000 D E F G H 4 Filter seals See page 5 for Hydraulic schemes 8 Max filter element differential pressure N Δp 0 bar 9 Option P01 MP Filtri standard Pxx On request V W NR FPM NR (ompatible with fluid HF, HF, HF) On request 5 onnection Type F onnection SE 16 MP Filtri The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved. 11
arometric indicators RED background YELLOW background GREEN background R 1/8 EN 106 SQR 11 V Ø 4 5 15 xial Pressure Gauge Materials: ase: Window: Dial: Pointer: Pressure connection: Pressure element: Painted Steel lear plastic Painted Steel Painted luminium rass ourdon tub cualloy soft soldered Technical data: Indicator type: xial pressure gauge Max working pressure: Static: 7 bar Fluctuating: 6 bar Short time: 10 bar Working temperature: From 40 to +60 ompatibility with fluids: Mineral oils, Synthetic fluids HF, HF, HF fluids in according to ISO 94 ccuracy class: cl..5 Protection degree: IP 1 in according to EN 6059 HYDRULI SYMOL DYED RNGE V5P01 GREEN KGROUND (from 0 to,5 bar) lean filter element YELLOW KGROUND (from,5 to bar) Warning RED KGROUND (from to 10 bar) ypass Ordering code: L5H71P01 Pressure setting:,5 bar ±10% 77 10 E R 1/8 EN 106 Ordering code: E5H50P01 Pressure setting:,5 bar ±10% HEX 7 Max tightening torque: 5 Nm Electrical Pressure Indicator Materials: ody: Internal parts: Seals: rass rass Nylon NR Technical data: Indicator type: Electrical pressure indicator Max working pressure: 40 bar Proof pressure: 60 bar Working temperature: From 5 to +80 ompatibility with fluids: Mineral oils, Synthetic fluids HF, HF, HF fluids in according to ISO 94 Electrical data: Resistive load: 5 / 14 VD 4 / 0 VD 5 / 15 V 5 / 50 V Electrical connections: 50 EN 1750180 Protection degree: IP 65 in according to EN 6059 vailable tex product II 1GD Ex ia II Tx Ex ia III Tx X HYDRULI SYMOL ELETRIL SYMOL N.O. N.. 9 9 ET R 1/8 EN 106 Ordering code: ET5HF05P01 Pressure setting:,5 bar ±10% Nr. male faston 6, x 0,8 HEX 4 Max tightening torque: 5 Nm Electrical Pressure Indicator Materials: ody: Internal parts: Seals: rass rass Nylon HNR Technical data: Indicator type: Electrical pressure indicator with thermostat Thermostat setting: 0 Max working pressure: 10 bar Proof pressure: 15 bar Working temperature: From 5 to +100 ompatibility with fluids: Mineral oils, Synthetic fluids HF, HF, HF fluids in according to ISO 94 Electrical data: Resistive load: 0,5 / 48 VD Electrical connections: Faston 6, x 0,8 HYDRULI SYMOL 1 ELETRIL SYMOL 1 Thermal lockout 1
Vaacum indicators Ø 4 5 18 VV Ordering code: VV16P01 onnection: R 1/8 EN 106 RED background YELLOW background GREEN background R 1/8 EN 106 SQR 14 xial Vacuum Gauge Materials: ase: Window: Dial: Pointer: Pressure connection: Pressure element: Technical data: Indicator type: Max working pressure: Painted Steel lear plastic Painted Steel Painted luminium rass ourdon tub ualloy soft soldered xial vacuum gauge Static: 7 bar Fluctuating: 6 bar Short time: 10 bar Working temperature: From 40 to +60 ompatibility with fluids: Mineral oils, Synthetic fluids HF, HF, HF fluids in according to ISO 94 ccuracy class: cl..5 Protection degree: IP 1 in according to EN 6059 HYDRULI SYMOL GRDUTED DISPLY GREEN KGROUND (from 0 to 1 cmhg) lean filter element YELLOW KGROUND (from 1 to 18 cmhg) Warning GREEN KGROUND (from 18 to 76 cmhg) ypass 77 1 VE VE Ordering code: VE150P01 onnection: R 1/8 EN 106 HEX 7 Max tightening torque: 5 Nm R 1/8 EN 106 Electrical Vacuum Indicator Materials: ody: Internal parts: Seals: rass rass Nylon NR Technical data: Indicator type: Electrical vacuum indicator Setting pressure: 0,1 bar ±10% Max working pressure: 10 bar Proof pressure: 15 bar Working temperature: From 5 to +80 ompatibility with fluids: Mineral oils, Synthetic fluids HF, HF, HF fluids in according to ISO 94 Electrical data: Resistive load: 5 / 14 VD 4 / 0 VD 5 / 15 V 5 / 50 V Electrical connections: 50 EN 1750180 Protection degree: IP 65 in according to EN 6059 vailable tex product II 1GD Ex ia II Tx Ex ia III Tx X HYDRULI SYMOL ELETRIL SYMOL N.O. N.. MP 015 UK 001 1
New Headquarters: MP FILTRI S.p.. Italy Via 1 Maggio, n. 0060 Pessano con ornago (Milan) Italy Tel. +9.0/9570.1 Fax +9.0/9574149795740188 email: sales@mpfiltri.com GRET RIT MP FILTRI U.K. Ltd. ourton Industrial Park ourton on the Water Gloucestershire GL54 HQ UK Phone: +44.0145185 Fax: +44.0145188 email: sales@mpfiltri.co.uk www.hydraulicparticlecounter.com GERMNY MP FILTRI Germany GmbH Hans Wilhelmi Straße DE6686 St. Ingbert Phone: +49.(0)689495650 Fax: +49.(0)689495650 email: service@mpfiltri.de FRNE MP FILTRI FRNE Sas Parc d activités des hanteraines 8 rue du ommandant d Estienne d Orves, Immeuble D 996 Villeneuve la Garenne France Phone: +(0)1.40.86.47.00 Fax: +(0)1.40.86.47.09 email: sales@mpfiltrifrance.com US MP FILTRI US Inc. 055 Quaker Pointe Drive Quakertown, P 18951 Phone: +1.1559100 Fax: +1.1559190 email: sales@mpfiltriusa.com www.mpfiltriusa.com ND MP FILTRI ND Inc. 881 Keele Street, oncord, Ontario L4K N1, anada Phone: +1.9050169 Fax: +1.9050756 email: mail@mpfiltricanada.com www.mpfiltricanada.com RUSS FEDERTION ITLFILTRI Yuryevskiy Pereulok 1 a, uilding 1 11100 Moscow, Russia Phone/Fax: +7(495)09460 email: mpfiltrirussia@yahoo.com www.mpfiltri.ru H MP FILTRI (Shanghai) o. Ltd. 180 Lianxi Road, 8 ld Floor Shanghai, Pudong 0104 P.R. hina Phone: + 86.158919916 Fax: + 86.158919667 email: sales@mpfiltrishanghai.com DI MP FILTRI DI Pvt. Ltd. Plot7F, Raj Pinnacle eside RMZ entennial, rookefield Road, Whitefield, angalore 560048 India Phone: +91804147 7444/4146 1444 Fax: +918041461888 email: sales@mpfiltri.co.in