:.5 eedback lever () in horizontal position at mid travel of stroke 4 44 L ± 43 Valve controller 56 5 57 45 46 6 53 ctuator 3 6 5 6 7 djust if necessary 75 Stroke 6- mm eedback lever hole Stroke (mm) L (mm) 9 6 36 7 4 4 9 54 3 6 4 66 5 7 9 STION - 6 6 67 n*m NO. WN. T PPR. Metso utomation Inc. MOUNTING ST LINR TUTORS - N93 6.7.5 IKOS KUKKOJO PVI T WN HK. PPR. OL NO. 66 MIROILM.
RSTRIT 6 Metso Page ( ) ngineering -om MOUNTING ST M-Z-NRVIK -9-N93 (9) Id-code: H363 Ver: Ref.number: pproved y: pproved ate: Status: Junnola Pekka, Helsinki JUL 5 5 NOV 6 pproved - Ready and approved by engineering Level Partno Id-code Ver Pcs Qty Unit escription escription Material wg.no wg.rev ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 3 5 6 7 4 6 9 43 44 45 46 53 56 57 5 H369 H6 H65 M5 H496 H7 H53 H9 3435 3534 H535 33393 3559 367 H36 H535 354 34574 H6 959 H36 H436 H45995 4 4 4.4 m RKT K LVR ILLING PI SOKT H SRW WSHR SOKT H SRW THR R THR R SPRING WSHR HXGON NUT LMP HXGON SRW WSHR HXGON SRW IXING PLT RO N HXGON NUT LOK NUT SPR SOKT H PLUG LMP SOKT H SRW LMP : I6534 - N93 I6534 - N9, STROK 6- MM (9-5) 6.5, N9 OR SPIL US M3X35 IN9 M3 IN5 M6X IN9 M5x4 M5 M IN7 M IN934 MX35x45 M5X 6.4/.5X.6 M6X NRVIK - N9 M5 ML, IN ISO 4-4 (IN 64-K) M5 IN934 M5 NYLOK IN95 5.3/X3 /4 NPT NRVIK -9 M6X35 IN9 N9-MSONILN 7/ SZ.3 ISI 36 ISI 36 ISI 36 ISO 356 4-7 ISO 356 4-7/ ISO 356 4-7/ ISI 36 ISI 36 ISI 36 ISO 356 4-7/ ISI 36 ISO 356 4- ISI 36 ISO 356 4- ISI 36 ISI 36 IN 67 PRT 4-7 ISO 356 4- ISI 36 ISI 36 ISI 36 ISO 356 4-7/ ISI 36 6655 6656 4649 4643 4645 4646 346 746 6659 666 545 564 46436 46437 959 666 666 94 THIS OUMNT N LL INORMTION ONTIN HRIN R TH PROPRTY O MTSO N R NOT TO US XPT S UTHORIZ IN WRITING Y MTSO
RSTRIT 6 Metso Page ( ) ngineering -om MOUNTING ST M-Z-NRVIK -9-N93 (9) Id-code: H363 Ver: Ref.number: pproved y: pproved ate: Status: Junnola Pekka, Helsinki JUL 5 5 NOV 6 pproved - Ready and approved by engineering Level Partno Id-code Ver Pcs Qty Unit escription escription Material wg.no wg.rev ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ocuments: ttached Items: Notes: 6 6 67 6 7a H3699 H36 H479 H776 H479 66 66 MOUNTING ST MOUNTING ST WITH ISI 36 LL JOINTS, STROK 9 MM. N93. 4 3 RKT SUPPORT PLT SOKT H SRW WSHR SOKT H SRW : I6534 - N93 5X5, 4X M MX6 IN9.4/6X.6 IN5 MX6 IN9 LINR TUTORS - N93 LINR TUTORS - N93 ISI 36 ISI 36 ISO 356 4-7 ISI 36 ISO 356 4-7 6657 665 6663 6664 THIS OUMNT N LL INORMTION ONTIN HRIN R TH PROPRTY O MTSO N R NOT TO US XPT S UTHORIZ IN WRITING Y MTSO
6 7 6 5 4 3 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4x 6,5 4,5 R 6 9,5 3,5 43 4,5 4,5 45 5 56 3x,5 x,5 4,5,5,5 4,5 R3 4x, Tasaus / Spot facing,5 33 (4),5 9,5,7 5x 9 7 + R + - 7 6 5 Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded Nimikekoodi (esim. HXXXXXX) merkittävä kappaleeseen Item code (e.g. HXXXXXX) must be marked on the part n*m NO. WN. T RVISION SRIPTION PPR. 4 WIGHT RKT : I6534-N93 Metso utomation Inc. KG SL UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T : T 6.7.5 WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 6656
: 4,3 5, 4, 5,7 5,4 59,5 66,6 73,6,7 7, 94,9 4,3 5, 4, 5,7 R3 5, x7,5 4, R,75 7 3, 3,5 45 5 45 6 6 Kirjaimet tehdään laserimerkinnällä Letters made by laser marking TIL : TIL : urr removed and sharp corners rounded Jäysteet ja terävät särmät poistettava n*m NO. WN. T PPR. Metso utomation Inc. K LVR I5634 - N9, STROK 6- MM (9-5) WITH UNILL 6..3 IKOS OLKKOMI T WN HK. PPR. OL NO. 4643 MIROILM.
7 6 5 4 3 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4 -, 3,5 6,5 Ra 3, hamfer Viiste 6,6 STION - +, -, TIL 4 :,5 3, x4 through/läpi 6,9 drilling depht poraus syvyys,6, depht/syvyys,6,45 R5, 5 +, STION - +, 6 3,5 Ra 6,3 ( Ra 3, ) UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T n*m NO. WN. T RVISION SRIPTION 7 6 5 PPR. WIGHT Metso utomation Inc. KG SL ILLING PI 6.5, N9 OR SPIL US : T 6..3 WN IKOS HK. PPR. OLKKOMI SolidWorks OL NO. MIROILM. 4646
7 6 5 4 3 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 6 44 6,5 3 5 + - R5 (5) R3 6 + - 9,4,4 5, 3 + - Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T n*m NO. WN. T RVISION SRIPTION 7 6 5 PPR. WIGHT IXING PLT NRVIK-N9 Metso utomation Inc. KG SL : T 6.7.5 WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 666
W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. L 5,3 arnell tilauskoodi: 7474 (R LTRONI HRWR - M59-5-SS - SPR/STNO, ROUN, SS, MM X 3MM) n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T SPR 5.3/XL WIGHT Metso utomation Inc. KG SL 5: T 6..3 WN IKOS HK. PPR. OLKKOMI SolidWorks OL NO. MIROILM. 46437
Metso utomation Oy
W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4x M6, depth 5 4 + -,3,3 4 + -,5,5 (5) 5 (3) (9) R,5 (5) 5 Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded,5 Ra 6.3 n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T LMP NRVIK -9 WIGHT Metso utomation Inc. KG SL : T 6.7.5 WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 666
Metso utomation Oy
7 6 5 4 3 W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 43 x,5 4,5 4,5 5,5,5 R3 4,5, Tasaus / Spot facing 9,5,7 5x 9,5,5 7 + 33 R 9,5 3,5 6 R 6 n*m Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded Nimikekoodi (esim. HXXXXXX) merkittävä kappaleeseen Item code (e.g. HXXXXXX) must be marked on the part NO. WN. T RVISION SRIPTION 7 6 5 PPR. 5 + WIGHT RKT : I6534 - N93 Metso utomation Inc. KG SL UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T :.5 T 6.7.5 WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 665
W MTSO UTOMTION R TH OWNRS O THIS OUMNT WHIH MUST NOT, WITHOUT OUR PRMISSION, OPI, GIVN TO THIR PRTY OR IN NY OTHR WY US GINST OUR OPYRIGHT. 4,5 5 7,5 (35) 6 5 (43) 4x M 64 Purseet poistettu ja terävät kulmat pyöristetty urr removed and sharp corners rounded n*m NO. WN. T RVISION SRIPTION PPR. UNMRK MHINING TOLRNS. TO MTSO UTOMTION S STING TOLRNS. TO S (ISO 6) T WIGHT SUPPORT PLT 5X5, 4X M Metso utomation Inc. KG SL : T 6.7.5 WN IKOS HK. KUKKOJO PPR. PVI SolidWorks OL NO. MIROILM. 6664