Air screwdrivers CSEZ

Air screwdrivers CSEZ

Faster, shorter, more accurate Air screwdrivers CSEZ Ideal for some tightening operations on enamelled or painted components, a greater tightening speed was requested (about 2000 r.p.m.), to prevent typical incoveniences such as the splintering of the surface or occasional lack of homogeneity when fastening the component. They guarantee higher productivity and lower costs of manufacturing, better quality of the finished product and more ergonomics. CSEZ...RAS CSEZ...LRAS Air screwdrivers CSEZ... RAS

Be demanding Don't be satisfied with the maximum Perfection is in your hands Reliability Productivity Ergonomics Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs The torque control system TRACS (Torque Repeatability and Accuracy Control System) ensures a high torque repeatability, i.e. a very low Mean Shift value also in the presence of variability of the joint softness level TRACS: this system maintains same torque values for hundreds of thousands of cycles. It guarantees a high quality improvement in the tightening process The inner kinematic parts guarantee constant performances and long tool life CSEZ...PRAS CSEZ...PARAS Considerable increase of the efficiency of the tightening cycle thanks to innovative systems Great savings in tightening cycle times: the CSEZ makes operations possible at approximately 2000 rpm, saving almost 70% on the time in respect to another air screwdriver with the same torque range Great reduction in maintenance costs: most of the internal components are common to the whole range with a consequently better and more economical management of spare parts The tightening torque control systems reduce the need to perform quality controls at the end of assembly. The productivity of the tightening cycle can therefore increase considerably / gas air inlet for an easier purchase of accessories The quick change chuck favours fast and safe bit replacement The cycle end acoustic signal emitted by the tightening torque control system permits the operator to pass on to the next tightening cycle more rapidly The grip design permits extraordinary ease in handling the screwdriver, all to the advantage of productivity Optimization of the tool performances in regard to ergonomics and operator safety The forward pistol grip, designed for optimum weight distribution, thanks to the innovative geometry of the load-bearing axes, makes the CSEZ...PARAS screwdrivers extremely compact, well-balanced and light (they only weigh 0.0 Kg!): meaning less operator fatigue The pistol version, for example, in respect to a air screwdriver offering the same torque range and speed, is about 20% lighter and % shorter The immediate, automatic air shut-off system, combined with the careful study of the internal gears guarantee vibration levels below 2,5 m/s 2 (ISO 8662-7) even under working conditions The reaction to the operator s hand is reduced to minimum levels, thanks to the efficient air supply shut-off system (TRACS) The start button (in the pistol grip version) requires 30% less effort when starting and 50% less during operation Comfortable reverse button, for ambidextrous operators, with a locking system: it reduces finger fatigue Controlled diffusion and silencing of the rear air exhaust, permitting greater operator comfort and low noise levels The insulated no slip grip reduces fatigue Supplied with hanging ring for balancer use (balancer) Easier and faster conveying system of air exhaust (pistol grip models) - see Accessories catalogue. Reduced noise level thanks to built-in silencing system

Naturally innovative Ecology Innovative systems designed paying even more attention with respect to environment and of its safeguard Forward pistol grip: Indicated when balancing systems cannot be used, and where it does not need a particular push along the fastening axis, e.g. when using metric screws Pistol grip: Indicated for situations in which screwdriving operations require thrust along the screwdriving axis (for example, with self-tapping and self-drilling screws) Pistol Upgrip: the screwdrivers CSEZ PURAS have been expressly created to solve all those situations in which straight or pistol grip models of air screwdrivers cannot be used. The special pistol UpGrip allows an optimal and very comfortable access to those working places otherwise unreachable by the traditional air screwdrivers, avoiding in this way ergonomically wrong working positions All the components are easy to dispose of because they are built using recyclable materials; therefore they do not represent any danger for environmental pollution The technological design of the air motor permits very high decrease of compressed air consumption, without affecting tool performance The possibility to work without need of lubrication guarantees the absence of oil exhaust into the working environment The UpGrip models, can be supplied, on request, with an insulated anti-slip plastic sheath Ergotech Project Having full knowledge of the ergonomics needs and of the safety of the operator, Fiam optimizes the performances of its tools and offers consulting and qualified training for the correct use of the screwdrivers

The pistol Upgrip model The cooperation between FIAM and a leader company in the household appliances has given as a result the screwdriver CSEZ PURAS, which is patented and in exclusive by Fiam. The pistol UpGrip allows an comfortable access to those working places otherwise unreachable by the traditional air screwdrivers. These situations can occur in different fields, such as those of the appliances field (e.g. in the assembly of the ovens). The air feed from the top and ergonomic studies of the grip have brought to the design of an extremely light, balanced and particularly handy tool. The UpGrip models, can be supplied,on request, with an insulated anti-slip plastic sheath CSEZ...PURAS

Type of screwdriver Grip min. Tigheting torque on soft joint max. min. max. Idle speed Starting system Reversibility Weight Dimensions (mm) Air consumption Accessories Noise level* Vibrations Model Code Type Nm Nm in Ib in Ib r.p.m. Type Type kg Ib Øxlxh l/s Drive dba m/s 2 CSEZRAS 83.76 0x28 6 CSEZ5RAS 835.76 0x28 CSEZLRAS 80.76 0x28 6 CSEZ5LRAS CSEZPARAS CSEZ5PARAS CSEZPRAS CSEZ5PRAS CSEZPURAS CSEZ5PURAS Lever Other technical features Models CSEZ...AS 805 853 8535 8536 8537 8538 853 Legend Reversibility: all models are suitable for tightening and untightening operations. Push to start Push button Push button Push button Air inlet /" gas Ø 8 mm 0, 0, 0, 0, 0, 0, Recommended hose bore.76.8.8.8.8.8.8 The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure. The tightening torque values have been measured in accordance with ISO 533 standard. Noise level has been measured in accordance with ISO 37 and ISO 57 standards. * Additional factor: 3 dba spread in method and production (ISO 57). Vibrations level have been measured in accordance with ISO 8662- and ISO 8662-7 standard. Accessory drive: female hexagonal drive /, 6,35 mm (ISO 73). The code number must be used when ordering. 0x28 38x70x55 38x85x55 38x70x55 38x85x55 3x70x65 3x85x65 76 76 7 7 7 7 The data given in the table are indicative and can be changed without prior notice.the torque values are purely indicative and may be influenced by the softness of the type of joint, by the type and length of the screw, by the pressure and quantity of air supply, and by the type of accessory used.the values indicated for noise and vibration levels were obtained in the laboratory, performing tests that comply with the standards stated, but alone are not sufficient for calculating risks. Values measured in the single work places may be higher than those stated.the values of actual exposure and consequent risks are specific and depend on the operator s method of work, the type of work piece and the work place, as well as the operator s time of exposure and his physical conditions. Fiam cannot be held responsible for any consequences deriving from the use of the information in the table when evaluating risks in the work place over which Fiam has no control. For all further details, please apply to the Fiam Technical Consultancy Service. CSEZ air screwdrivers are designed for use with lubricated and unlubricated compressed air June 2007 - Printed on recycled paper for the safeguard of the environment Copyright Fiam Spa. The unauthorised distribution and/or reproduction of all or part of this publication is strictly forbidden. Standard equipment (supplied with the tool) Clutch adjustment key Hanging ring Use and maintenance manual Eco-friendly packaging Accessories available upon request Bits, sockets, balancers, conveyors, adaptors for inserts, exhaust air conveyors, and other accessories. Please see the Accessories catalogue Models available upon request The UpGrip models, can be supplied, on request, with an insulated anti-slip plastic sheath (add at the end of the model: e.g. CSEZ...PURAS CSEZ...PURAS ) Fiam Utensili Pneumatici Spa Viale Crispi 23-3600 Vicenza - Italy Tel. +3.0.385000 - Fax +3.0.385002 customerservice@fiamairtools.com www.fiamairtools.com FIAM PRODUCTS ONLY USE QUALITY COMPONENTS