Oxygen & Nitrogen Parts & Complete Systems Oxygen & Nitrogen Service Catalog
A word about our carts Q. Why should you buy AERO Specialties OXYGEN & NITROGEN servicing equipment? A. Highest quality, lowest cost of ownership, shortest lead times, best service. Whether you need a complete system or just a few items, our knowledgeable technical staff can custom configure a system precisely to your needs. Or, you can purchase any of the products you want 24/7 straight from our secure online store. All equipment comes complete with 1-year warranty, Operation Manual, and calibration certificates (for all gauges). Our goal is to make O2 and N2 service as user-friendly and cost-effective as possible. The real answer is: you can t afford NOT to buy AERO Specialties OXYGEN & NITROGEN equipment. Quality brass bottle fittings oxygen cleaned (O2). Non-standard adapters available for oxygen & nitrogen. Complete & ready for service: all systems come pre-plumbed & ready to service, with all required hoses and fittings. Calibrated gauges, simple & secure mounting, clearly labeled for safe use. Gauge guards: provides muchneeded protection for those fragile gauges Brass regulator valves for easy operation and precise control of flow rates. Heavy-duty powder-coated steel frame and simple design for durability and easy maintenance. State-of-the-art booster pumps for oxygen and nitrogen tanks, driven by shop air or nitrogen. Surprisingly affordable pays for itself quickly by not wasting majority of expensive gas. Tilting cart (3-bottle) for easy loading of heavy gas bottles. Locks when loaded. Reflectors, Warning & Operation Labels conform to strict European safety standards (CE). Brass Schrader valve connector is standard on all nitrogen regulators. Other service tools & pressure gauges always in stock. Heavy-duty 5th-wheel steering with large pneumatic wheels: easy to tow AND move by hand. Secure, quick, and simple towbaractuated brake. Outstanding service & support: 24/7 online store for all parts ordering; fast warranty response; knowledgeable, friendly service & salespeople, easy to contact by phone or email. Parts interchangeability: All AERO O2/N2 and Lav & Water carts use the same heavy-duty running gear components, which makes maintenance easier & more efficient. Detailed & thorough Operation Manuals: easy-to-follow operation and maintenance instructions, parts lists, and recommended servicing procedures & safety precautions. 2 208-378-9888 www.aerospecialties.com
Tilting oxygen carts 2-bottle tilting oxygen hand cart AERO Specialties 2-bottle Tilting Oxygen/Nitrogen Handcart. Compact size, stable design, booster-capable cart. Bottles load vertically, making loading and unloading a single person job. Swing-down steel carriages allow use of rear swivel casters for additional safety and control. Retractable caster wheels makes this handcart inexpensive to ship, store and provides stable handling and security for boosters and regulator systems. Simple & easy to move by hand Narrow footprint (31 1/2 /80 cm) can pass through any doorway Tilting platform allows one person to load/unload bottles in upright position Retractable casters allow for stability not found on traditional 2-bottle handcarts Heavy 11 gauge HR Steel with 3/16 thick steel supports and round steel tube Heavy poly straps with steel cinch buckles secure gas cylinders up to 12.0 diameter Pneumatic tires and swivel casters make this cart easy to push, with a self-supporting no strain design Booster/regulator platform provides multiple configuration options (not found on most 2-bottle handcarts) User-friendly, ergonomic design Inexpensive to ship Custom configurations readily available Carts, regulators, boosters and parts available 24/7 with online store (aerospecialties.com) Dimensions: Boxed (shipping): 32 x 16 x 32, 79 lbs (82cm x 41cm x 82cm, 36 kg) Palletized (shipping): 40 x 48 x 47, 130 lbs (102cm x 122cm x 122cm, 59 kg) 208-378-9888 www.aerospecialties.com 3
Tilting oxygen carts 2-bottle tilt n tow oxygen cart AERO Specialties 2-Bottle Tilting Towable Oxygen/Nitrogen Cart. Compact size, low-profile, booster-capable cart. Bottles load vertically, making loading and unloading a single person job. Indexed locking platform allows bottles to lock in multiple positions depending on application. Pneumatic tires and front swivel casters (casters do not contact ground while towing) allow for easy maneuverability by hand as well as providing superior stability while towing. Ample room for booster, regulators, and hoses. Adjustable hitch heights for simple & easy towing Simple & easy to move by hand Narrow footprint (33-inches/84cm) can pass through doorway Heavy-duty, powder-coated steel construction Tilting platform allows one person to load/unload bottles in upright position Very low profile for easy aircraft servicing Multiple locking positions Protective cabinet for booster & regulators User-friendly, ergonomic design CE-marked Custom configurations readily available Replacement parts available 24/7 with online store (aerospecialties.com) Dimensions: Vertical (storage/loading): 40 x 33 x 76, 513 lbs (102cm x 84cm x 193 cm, 233 kg) Horizontal (towing/aircraft service): 76 x 33 x 41, 513 lbs (193cm x 84cm x 104cm, 233 kg) Crated (shipping): 79 x 49 x 49, 840 lbs (201cm x 124cm x 124cm, 382 kg) 4 208-378-9888 www.aerospecialties.com
Oxygen carts 3-bottle oxygen carts Our 3-bottle tilting oxygen cart accepts three standard K size (9 x 56 ) bottles. Tilting bottle rack allows easy loading and unloading of bottles. Oxygen regulator can be easily mounted on the built-in regulator bracket. Our OB-30 Oxygen Booster can be mounted on the front of the cart. Heavy-duty 5th-wheel steering provides optimal in-hangar maneuverability by hand, while the heavy-duty running gear and towbar allows for unlimited vehicle towing across the ramp or airfield. Complete Systems We offer complete 3-bottle oxygen systems for both hangaronly and remote applications. We will configure your system with only the items you request, with or without booster and/ or regulators and connecting hose kits. All complete systems are shipped fully assembled and ready to operate on arrival (unless a more compact shipping requirement is necessary). À la carte We also offer individual components for adding or replacing parts of existing oxygen servicing systems. All boosters, regulators, and accessories are available on our online store at any time. Most products are always in stock, with very few and very short backorders. Simple, ergonomic design Positive bottle lock system Heavy duty pneumatic tires with locking towbar brake Heavy-duty, powder-coated steel frame Upright loading position; 45-degree servicing position Built-in hose racks and lift handles (both sides) Built-in regulator mounting manifold and booster bracket Complete safety & operation decal kit, complies with strict EU regulations CE-marked models available Dimensions (physical): 93 x 47 x 48, 513 lbs (236 cm x 119 cm x 122 cm, 233 kg) Crated (shipping): 96 x 48 x 48, 725 lbs (244 cm x 122 cm x 122 cm, 330 kg) 208-378-9888 www.aerospecialties.com 5
Oxygen carts 4-bottle oxygen carts Our 4-bottle oxygen cart accepts four standard K size (9 x 56 ) bottles. Regulators can be easily mounted on the built-in regulator brackets. Our OB-30 Oxygen Booster can be mounted on the top of the cart for safe & easy operation. Heavy-duty 5th-wheel steering provides optimal in-hangar maneuverability by hand, while the heavy-duty running gear and towbar allows for unlimited vehicle towing across the ramp or airfield. Complete Systems We offer complete 2, 3, and 4-bottle oxygen systems for both hangar-only and remote applications. We will configure your system with only the items you request, with or without booster and/ or regulators and connecting hose kits. All complete systems are shipped fully assembled and ready to operate on arrival (unless a more compact shipping requirement is necessary). À la carte We also offer individual components for adding or replacing parts of existing oxygen servicing systems. All boosters, regulators, and accessories are available on our online store at any time. Most products are always in stock, with very few and very short backorders. Simple, ergonomic design Positive bottle lock system Heavy duty pneumatic tires with locking towbar brake Heavy-duty, powder-coated steel frame with horizontal bottle loading Built-in hose racks (both sides) Built-in regulator mounting manifold and booster bracket Complete safety & operation decal kit, complies with strict EU regulations CE-marked models available Dimensions (physical): 96 x 48 x 45, 600 lbs (244 cm x 122 cm x 87 cm, 273 kg) Crated (shipping): 96 x 48 x 48, 725 lbs (244 cm x 122 cm x 122 cm, 330 kg) 6 208-378-9888 www.aerospecialties.com
Tilting nitrogen carts 2-bottle tilting nitrogen hand cart AERO Specialties 2-bottle Tilting Oxygen/Nitrogen Handcart. Compact size, stable design, booster-capable cart. Bottles load vertically, making loading and unloading a single person job. Swing-down steel carriages allow use of rear swivel casters for additional safety and control. Retractable caster wheels makes this handcart inexpensive to ship, store and provides stable handling and security for boosters and regulator systems. Simple & easy to move by hand Narrow footprint (31 1/2 /80 cm) can pass through any doorway Tilting platform allows one person to load/unload bottles in upright position Retractable casters allow for stability not found on traditional 2-bottle handcarts Heavy 11 gauge HR Steel with 3/16 thick steel supports and round steel tube Heavy poly straps with steel cinch buckles secure gas cylinders up to 12.0 diameter Pneumatic tires and swivel casters make this cart easy to push, with a self-supporting no strain design Booster/regulator platform provides multiple configuration options (not found on most 2-bottle handcarts) User-friendly, ergonomic design Inexpensive to ship Custom configurations readily available Carts, regulators, boosters and parts available 24/7 with online store (aerospecialties.com) Dimensions Boxed (shipping): 32 x 16 x 32, 79 lbs (82cm x 41cm x 82cm, 36 kg) Palletized (shipping): 40 x 48 x 47, 130 lbs (102cm x 122cm x 122cm, 59 kg) 208-378-9888 www.aerospecialties.com 7
Tilting nitrogen carts 2-bottle tilt n tow nitrogen cart AERO Specialties 2-Bottle Tilting Towable Oxygen/Nitrogen Cart. Compact size, low-profile, booster-capable cart. Bottles load vertically, making loading and unloading a single person job. Indexed locking platform allows bottles to lock in multiple positions depending on application. Pneumatic tires and front swivel casters (casters do not contact ground while towing) allow for easy maneuverability by hand as well as providing superior stability while towing. Ample room for booster, regulators, and hoses. Adjustable hitch heights for simple & easy towing Simple & easy to move by hand Narrow footprint (33-inches/84cm) can pass through doorway Heavy-duty, powder-coated steel construction Tilting platform allows one person to load/unload bottles in upright position Very low profile for easy aircraft servicing Multiple locking positions Protective cabinet for booster & regulators User-friendly, ergonomic design CE-marked Custom configurations readily available Replacement parts available 24/7 with online store (aerospecialties.com) Dimensions: Vertical (storage/loading): 40 x 33 x 76, 513 lbs (102cm x 84cm x 193 cm, 233 kg) Horizontal (towing/aircraft service): 76 x 33 x 41, 513 lbs (193cm x 84cm x 104cm, 233 kg) Crated (shipping): 79 L x 49 W x 49 H, 840 lbs (201cm x 124cm x 124cm, 382 kg) 8 208-378-9888 www.aerospecialties.com
Nitrogen carts 3-bottle nitrogen carts Our 3-bottle tilting nitrogen cart accepts three standard K size (9 x 56 ) bottles. Tilting bottle rack allows easy loading and unloading of bottles. Nitrogen regulator(s) can be easily mounted on the built-in regulator bracket. Our NB-45 Nitrogen Booster can be mounted on the front of the cart. Heavy-duty 5th-wheel steering provides optimal in-hangar maneuverability by hand, while the heavy-duty running gear and towbar allows for unlimited vehicle towing across the ramp or airfield. Complete Systems We offer complete 3-bottle Nitrogen Service systems for both hangar and remote applications. We will configure your system with only the items you request, with or without booster and/ or regulators and connecting hose kits. All complete systems are shipped fully assembled and ready to operate on arrival (unless a more compact shipping requirement is necessary). À la carte We also offer individual components for adding or replacing parts of existing nitrogen servicing systems. All boosters, regulators, and gauges and other accessories are available on our online store at any time. Most products are always in stock, with very few and very short backorders. Simple, ergonomic design and positive bottle lock system Heavy duty pneumatic tires with locking towbar brake Heavy-duty, powder-coated steel frame Upright loading position; 45-degree servicing position Built-in hose racks and lift handles (both sides) Built-in regulator mounting manifold and booster bracket Complete safety & operation decal kit, complies with strict EU regulations CE-marked models available Dimensions (physical): 93 x 47 x 48, 513 lbs 236 cm x 119 cm x 122 cm, 233 kg) Crated (shipping): 96 x 48 x 48, 725 lbs (244 cm x 122 cm x 122 cm, 330 kg) 208-378-9888 www.aerospecialties.com 9
Nitrogen carts 4-bottle nitrogen carts Our 4-bottle nitrogen cart accepts four standard K size (9 x 56 ) bottles. Regulators can be easily mounted on the built-in regulator brackets. Our NB-45 Nitrogen Booster can be mounted on the top of the cart for safe & easy operation. Heavy-duty 5th-wheel steering provides optimal in-hangar maneuverability by hand, while the heavy-duty running gear and towbar allows for unlimited vehicle towing across the ramp or airfield. Complete Systems We offer complete 2, 3, and 4-bottle nitrogen systems for hangar and remote applications. We will configure your system with only the items you request, with or without booster and/ or regulators and connecting hose kits. All complete systems are shipped fully assembled and ready to operate on arrival (unless a more compact shipping requirement is necessary). À la carte We also offer individual components for adding or replacing parts of existing servicing systems. All boosters, regulators, and accessories are available on our online store at any time. Most products are always in stock, with very few and very short backorders. Simple, ergonomic design Positive bottle lock system Heavy duty pneumatic tires with locking towbar brake Heavy-duty, powder-coated steel frame with horizontal bottle loading Built-in hose racks (both sides) Built-in regulator mounting manifold and booster bracket Complete safety & operation decal kit, complies with strict EU regulations CE-marked models available Dimensions (physical): 96 x 48 x 45, 600 lbs (244 cm x 122 cm x 87 cm, 273 kg) Crated (shipping): 96 x 48 x 48, 725 lbs (244 cm x 122 cm x 122 cm, 330 kg) 10 208-378-9888 www.aerospecialties.com
Combo carts 4-bottle combo cart Our 4-bottle oxygen/nitrogen cart accepts 4 standard K size (9 x 56 ) oxygen or nitrogen bottles. Regulators can be easily mounted on the built-in regulator brackets. NB-45 Nitrogen Booster and OB-30 Oxygen Booster can be mounted on the top of the cart for safe & easy operation. Heavy-duty 5th-wheel steering provides optimal in-hangar maneuverability by hand, while the heavy-duty running gear and towbar allows for unlimited vehicle towing across the ramp or airfield. Complete Systems We offer complete 2, 3, and 4-bottle nitrogen and oxygen systems for hangar and remote applications. We will configure your system with only the items you request, with or without booster and/or regulators and connecting hose kits. À la carte We also offer individual components for adding or replacing parts of existing servicing systems. All boosters, regulators, and accessories are available on our online store at any time. Most products are always in stock, with very few and very short backorders. Simple, ergonomic design Positive bottle lock system Heavy duty pneumatic tires with locking towbar brake Heavy-duty, powder-coated steel frame with horizontal bottle loading Built-in hose racks (both sides) Built-in regulator mounting manifold and booster bracket Complete safety & operation decal kit, complies with strict EU regulations CE-marked models available Dimensions (physical): 96 x 48 x 45, 600 lbs (244 cm x 122 cm x 87 cm, 273 kg) Crated (shipping): 96 x 48 x 48, 725 lbs (244 cm x 122 cm x 122 cm, 330 kg) 208-378-9888 www.aerospecialties.com 11
Regulators & acessories Part Number Description Image 001769 (high) 001589 (low) 001587 (high & low combo) 1-bottle NITROGEN HIGH pressure (300-3500psig) or LOW pressure (30-300psig) regulator and aircraft supply line with standard aircraft fitting. Regulator mounts directly to bottle. Includes 15 Delivery hose, manual, and placards as required. 001567 2-bottle NITROGEN LOW-HIGH pressure (30-3500psig) regulator and aircraft supply line with standard aircraft fitting. Includes 15 Delivery hose, manual, and placards as required. 001583 3-bottle NITROGEN LOW-HIGH pressure (30-3500psig) regulator system, includes regulators, hoses, & required fittings. 15 hose length. 001591 4-bottle NITROGEN LOW-HIGH pressure (30-3500psig) regulator system, includes regulators, hoses, & required fittings. 15 hose length. 05-001 Inflating Valve Adapter. 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) 05-002 Strut Service Valve Adapter. Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) 06-011 Tire Service Gauge. Nitrogen (300psi), Bleed Valve, Inlet valve stem connection (m 0.305-32) Outlet hose 18 inch w/valve stem (f 0.305-32). 06-042 Strut Service Gauge. Nitrogen (0-3000 psi) 06-043 Tire Pressure Gauge. Nitrogen (0-300 psi) 12 208-378-9888 www.aerospecialties.com
Oxygen & nitrogen All AERO Specialties oxygen & nitrogen regulator systems come with required placards, an operation manual, and calibration certificates for all gauges. We build all regulators in accordance with Compressed Gas Association standards. All items include a 12-month factory warranty. Parts support is available through our online store (www.aerospecialties.com), or by phone. All AERO Specialties Oxygen & Nitrogen equipment is CE marked. Oxygen Regulator Systems Teflon-core, braided stainless steel hoses Certified, calibrated gauges 14,000psi burst pressure/3,000psi working pressure rated Part Number Description Image 001576 001569 001585 001592 1-bottle OXYGEN regulator and aircraft supply line with standard aircraft fitting. Regulator mounts directly to bottle. Includes 15 Delivery hose, manual, and placards as required. 2-bottle OXYGEN regulator and aircraft supply line with standard aircraft fitting. Regulator mounts to bottle or panel. Includes 15 Delivery hose, manual, and placards as required. 3-bottle OXYGEN regulator system, includes hoses and fittings. 15 hose length. Add $150 for 25 hose. 4-bottle OXYGEN regulator system, includes hoses and fittings. 15 hose length. Add $150 for 25 hose. Nitrogen Regulator Systems: Durable non-metallic braided hoses Certified, calibrated gauges 5,000psi working pressure 04-002 04-002-s 04-002A GSE-1039-00 GSE-1042-00 AERO Specialties oxygen charge adapter combo. 2500 PSI, 1/4 male NPT inlet connection, 9/16-18UNF male inlet connected with a 2 bendable tube with AN800-3 (3/8-24) aircraft connection. Oxygen Charge Adapter Combo 2500 PSI Max, 1/4 Male NPT Inlet connection, 3/8-24 UNF or 9/16-18UNF Outlet Connection. Subassembly PN:04-002A, 1/4 Male NPT Inlet connection x 3/8-24 UNF portion of OXY adapter to fit to aircraft (Requires 9/16-18 UNF Outlet Connection as provided in 04-002 assembly to adapt to outlet hose) Oxygen Charge Adapter. JIC/AN-4 Male Flared Tube connected by 2 tube with AN800-3 Aircraft Connection. Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 2 tube with AN800-3 Aircraft Connection. 208-378-9888 www.aerospecialties.com 13
Boosters Oxygen Booster & Specs Oxygen wetted components are principally brass - the best material for oxygen service. All oxygen wetted parts have been cleaned per Spec. ARP 1176 No inlet air valve, air regulator or air lubricator required Dual 5 micron filters, one each for oxygen in and out Integrated circuit design. No external tubing and fittings to leak Integral cut-in and cut-out pressure switches. Pump will not run if in-pressure is below 250 psi or out-pressure is above 2,400 psi. Polymeric seals and bearings for long life and high efficiency Totally sparkless operation Twin rod seals with vent prevents air/oxygen migration Integral subplate air regulator with pump on/off air toggle switch Input/output hoses required: stainless steel/teflon 4-rated to 3,000 psi Booster output rating: 2,200 psig Oxygen booster ratio: 30:1 Dimensions: 14 long x 9.4 high x 8.9 wide, 42 lbs. Nitrogen Booster & Specs Integrated circuit design. No external tubing and fittings to leak Output rating: Adjustable from 500 to 4500 psi. Nitrogen booster ratio: 45:1 Pumps donor bottle down to 200 psig Can be mounted on bottle cart or work bench Dimensions: 12.1 long, 9.4 high, and 10.8 wide, 24 lbs. Why do you need a booster? The OB-30 oxygen booster and NB-45 nitrogen booster are effective tools for cutting costs and saving time when servicing your aircraft. Each of these compact and inexpensive boosters allows maximum utilization of your oxygen and nitrogen bottles while saving you time and money. Here s how it works: Oxygen A full K-Cylinder of oxygen has a volume of 251 cu ft at 2200psi. Most oxygen services require pressures of 1850psi. Without an oxygen booster you can use only 36 cu ft of your bottle before the pressure falls below 1850psi. Assuming a cost of $33 per K-Cylinder, the price per cu ft works out to be.13 cents. The OB-30 allows you to use an additional 150 cu ft of volume, equal to a savings of almost $20 per bottle. At this rate a booster will pay for itself after servicing 241 bottles. Nitrogen A full K-Cylinder of nitrogen has a volume of 335 cu ft at 3000psi. This makes a nitrogen booster essential. At this rate you are saving the cost of your entire bottle. At $33 dollars per bottle the NB-45 will pay for itself after servicing only 106 bottles. The Big Payback In addition to the hard cost savings on gas by not returning nearly full bottles, the NB-45 and OB-30 boosters will allow you to drastically reduce your operation s staff time for servicing aircraft and changing out and re-ordering oxygen and nitrogen bottles. You can also cut your in-house inventory of bottles in half because you won t need nearly as many backup bottles. In these days of budget belt-tightening, boosters might provide a payoff sooner than later. 14 208-378-9888 www.aerospecialties.com
Company Profile Since 1987, owner Matt Sheehan and his AERO Specialties staff have provided comprehensive GSE solutions to customers worldwide. This Total GSE approach is based on our commitment to being the best one-stop GSE shop in the business. We sell new, used, and refurbished GSE, and offer attractive rental and leasing packages on all equipment. Our single-source approach will save you time and money both before and after the sale. And we stand behind our equipment. Whether it is designing a specific product or being the exclusive distributor of the popular EAGLE All Wheel Drive Aircraft Tugs, AERO Specialties will impress you with our total commitment to customer service. Let us make your operation more efficient and profitable. 208-378-9888 www.aerospecialties.com 15
Call 208-378-9888 or visit our online store for more information: www.aerospecialties.com 11175 West Emerald, Boise, Idaho 83713