TECH CHEMICAL VULCANIZING FLUID

Similar documents
TECH TIRE AND TUBE COMPOUND (INCL. LITE)

TECH CHEMICAL VULCANIZING FLUID

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

MAXIBOND CEMENT FLAMMABLE

TECH BEAD SEALER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

TECH RUB O MATIC AEROSOL

PANGOFOL WHITE NON FLAMMABLE

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

LABTONE MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

ALVIN LAB METAL. Section 1: PRODUCT INFORMATION. Product uses: Metal patching compound. Chemtrec (24h).

PANGOFOL BLACK NON FLAMMABLE

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

ACTIVATOR/HARDNER. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

LIQUID HARDENER (MEKP)

20 20A WHITE AND PASTEL TINTS

40 40A WHITE AND PASTEL TINTS

INACTIVE - MOBIL 1 0W-40

Material Safety Data Sheet

BESSEY SPATTER RELEASE SOLVENT BASED

HI TEMP LAB METAL HT 14, HT 24

Material Safety Data Sheet

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

DIAMOND KOTE LEATHER/VINYL RESTORER 118,6118

COPPER REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

NYOGEL 781D. Product: 781D Revision Date: 2003/03/26. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

SULFURIC ACID.24N. Section 1: PRODUCT INFORMATION

Material Safety Data Sheet

SECTION I - IDENTIFICATION

SECTION I - IDENTIFICATION

Material Safety Data Sheet

ACID DEMAND REAGENT (ADR)

PINK LIQUID HAND SOAP

CALCIUM INDICATOR LIQUID

DPD REAGENT #3. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

CALCIUM INDICATOR LIQUID

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

DPD REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

MATERIAL SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF PRODUCT

BASE DEMAND REAGENT (BDR)

SOLVENT BASED ANTI SPLATTER (AEROSOL)

TOTAL HARDNESS REAGENT

SECTION I - IDENTIFICATION

SECTION I - IDENTIFICATION

TOTAL HARDNESS REAGENT

M A T E R I A L S A F E T Y D A T A S H E E T

SAFETY DATA SHEET Lead Stop

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

CB Glass - Liquid Luster SDS Revision Date 01/12/2016. Safety Data Sheet Craft Center Drive Smithville TN Ext 124

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

Version /28/2006

MATERIAL SAFETY DATA SHEET

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15

SAFETY DATA SHEET SR-48

BESA GLASS 2.1 VOC URETHANE CLEAR COAT

Version /28/2006

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Material Safety Data Sheet

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

MATERIAL SAFETY DATA SHEET PAGE 1

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

Safety Data Sheet SWEEPING COMPOUND TY II

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/ attention.

SAFETY DATA SHEET KWIK SOLVE 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBER

10 10A. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

MATERIAL SAFETY DATA SHEETS

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

Material Safety Data Sheet

SAFETY DATA SHEET Confirms to OSHA Hazard Communication Standard (CFR ) HazCom 2012

Safety Data Sheet 1818BR

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Version /28/2006

Weight percent. CAS No.

MATERIAL SAFETY DATA SHEET PAGE 1

TOPAZ. Section 1: PRODUCT INFORMATION B3, D2A, D2B. Section 2: HAZARDOUS INGREDIENTS

3. COMPOSITION / INFORMATION ON INGREDIENTS

Safety Data Sheet EPI-CLENZ FOAMING INSTANT HAND SANITIZERS

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Madison Chemical Co., Inc.

130 HIGH GLOSS. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

Safety Data Sheet Cytology Fixative Spray

Chemical Name CAS Number Weight % ACGIH TLV ACGIH STEL OSHA PELTWA SKIN Acetone ppm N/A 1000ppm Yes

MATERIAL SAFETY DATA SHEET

CHEMICAL & FERTILIZER, LLC Safety Data Sheet Section 1 Chemical Product and Company Identification

Transcription:

TECH CHEMICAL VULCANIZING FLUID Product: 760 SERIES Manufacturer emergency phone number: Section 1 : PRODUCT AND COMPANY IDENTIFICATION Manufacturer: Tech international 200 East Coshocton Street P.O. Box 486 Johnstown, Ohio 43031. Chemtrec 800 424 9300. 703 527 3887. Supplier: Same as manufacturer. Product name: Tech Chemical Vulcanizing Fluid Product uses: Rubber adhesive. Catalog number(s): 760 series, 761, 762, 763 series, 764IP, 765IP, 766IP, 767IP, 770 Effective date: 2009/2/12 Revision No.: 7 Last review: 2009/2/12 HMIS H 1 F 3 R 0 PPE Sec. 8 NFPA: Section 2 : INGREDIENT INFORMATION C.A.S. Concentration% wgt/wgt Ingredient Name 5459 93 8 <1 N ETHYLCYCLOHEXYLAMINE 64742 89 8 *>93 SOLVENT NAPHTHA, LIGHT ALIPHATIC OSHA PEL TWA OSHA PEL STEL ACGIH TLV TWA ACGIH TLV STEL NIOSH REL TWA 500 PPM 400 PPM 86 PPM NIOSH REL STEL NIOSH IDLH Section 2A: ADDITIONAL INGREDIENT INFORMATION Note: (supplier). CAS# 64742 89 8: LD50 >2,840 mg/kg rat dermal. CAS# 64742 89 8: LD50 >7,100 mg/kg rat oral. CAS# 5459 93 8: LD50 377 mg/kg rat oral. CAS# 5459 93 8: LD50 750 mg/kg rabbit dermal. CAS# 64742 89 8: TLV 400 ppm (skin). TECH CHEMICAL VULCANIZING FLUID Page 1 of 7

*: Consists of a complex stream of predominantly C5 to C10 hydrocarbons, exact composition varies. Section 3 : HAZARD IDENTIFICATION Route of entry: Skin contact, eye contact, inhalation and ingestion. Effects of acute exposure Eye contact: May cause irritation. May cause redness and tearing. May cause stinging. May cause swelling. Skin contact: May cause redness. May cause burns. May cause cracking. May cause drying. May cause mild irritation. Inhalation: Vapors may be harmful. May cause metallic taste. May cause weakness and fatigue. May cause respiratory irritation. May cause unconsciousness. May cause confusion. May cause coma and death. Breathing large amounts may be harmful. May cause light headedness. May cause nose and throat irritation. Inhalation overexposure can lead to central nervous system depression producing effects such as headache, nausea, dizziness and loss of coordination. May cause lung damage. Vapors may cause irritation. Ingestion: May cause nausea, vomiting and diarrhea. May cause gastro intestinal irritation. May be fatal if ingested. Aspiration hazard if swallowed. May cause central nervous system depression. Low oral toxicity in small amounts. Effects of chronic exposure: Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. May cause kidney effects. Contains an ingredient which may be corrosive. Section 4 : FIRST AID MEASURES Skin contact: Remove contaminated clothing. Wash thoroughly with soap and water. Seek medical attention if irritation persists. Eye contact: Flush with water for at least 15 minutes, holding eyelids open with fingers. Consult a physician if irritation persists. Inhalation: Keep person warm and at rest. Remove victim to fresh air. If breathing is difficult administer oxygen. If not breathing, have qualified person give artificial respiration. Obtain medical attention. TECH CHEMICAL VULCANIZING FLUID Page 2 of 7

Ingestion: Obtain immediate medical attention. Rinse mouth with water several times. Do not induce vomiting. If victim is drowsy or unconscious, place on left side with head down. Do not leave individual unattended. Never give anything by mouth to an unconscious person. If spontaneous vomiting occurs, have victim lean forward with head down to avoid breathing in of vomitus. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 5 : FIRE FIGHTING MEASURES Flammability: Extremely flammable. Conditions of flammability: Vapours may travel to a source of ignition and flash back. Vapours are heavier than air and may travel along the ground and be ignited by flames, sparks or other ignition sources at locations distant from the material handling point. Heat, sparks and open flames. Extinguishing media: Carbon dioxide, dry chemical, foam. Special procedures: Self contained breathing apparatus required. Firefighters should wear the usual protective gear. Auto ignition temperature: Not available. Flash point ( C), method: 6.7 (20 F) Lower flammability limit (% vol): 1.1 Upper flammability limit (% vol): 7.5 Explosion Data Sensitivity to static discharge: Take precautionary measures against static discharge. Sensitivity to mechanical impact: Not available. Hazardous combustion products: Not available. Rate of burning: Not available. Explosive power: Product (even just residue) can ignite explosively. Section 6 : ACCIDENTAL RELEASE MEASURES Leak/Spill: Eliminate all sources of ignition. Dike area to prevent spreading. Evacuate all non essential personnel. Prevent entry into drains, sewers, and other waterways. Absorb residual material with sand or other absorbent material. Stop leak if without risk. Wear appropriate protective equipment. Ground handling equipment. Stay upwind. Remove to non leaking containers for disposal. Use water spray to reduce vapors. Remove with vacuum trucks or pump to salvage vessels. Rinse away trace residues. TECH CHEMICAL VULCANIZING FLUID Page 3 of 7

Handling procedures and equipment: Section 7 : HANDLING AND STORAGE Maintain a good personal hygiene. Keep away from heat, sparks, and open flame. Use adequate ventilation. Wash thoroughly after using, particularly before eating or smoking. Wear personal protective equipment appropriate to task. Empty containers containing residue may cause a hazard. Do not cut, grind, weld or drill empty container. Use proper grounding procedures. Avoid contact with skin, eyes and clothing. Avoid breathing vapor, fumes or mist. Launder contaminated clothing prior to reuse. Do not ingest. Air dry contaminated clothing in a well ventilated area before laundering. Storage requirements: Store away from all sources of ignition. Store away from incompatible materials. Keep away from heat, sparks, and open flames. Store in a room or area suitable for the storage of flammable materials. Precautionary Measures Section 8 : EXPOSURE CONTROLS / PERSONAL PROTECTION Gloves/Type: Respiratory/Type: Chemical resistant gloves. Polyvinyl alcohol gloves. Nitrile gloves. Eye/Type: If exposure limit is exceeded, wear a NIOSH approved respirator. (negative pressure type). Footwear/Type: Splash proof chemical goggles. Impervious boots. Clothing/Type: Impervious clothing. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: Provide ventilation capable of maintaining emissions below the TLV. Explosion proof ventilation equipment. Local exhaust and/or general ventilation. Provide sufficient mechanical ventilation to maintain exposure below TLV. TECH CHEMICAL VULCANIZING FLUID Page 4 of 7

Section 9 : PHYSICAL AND CHEMICAL PROPERTIES Physical state: Liquid. Appearance & odor: Strong solvent odor. High viscosity liquid. Light amber liquid. Odor threshold (ppm): Not available. Vapour pressure (mmhg): @ 20 C (68 F). 38 Vapour density (air=1): 3.30 Volatiles (%) By volume: 93.9 Evaporation rate (butyl acetate = 1): 3.2 Boiling point ( C): (initial boiling point). @ 760 mm Hg. 98.3 110 C (209 230 F) Freezing point ( C): Not available. ph: Not available. Specific gravity @ 20 C: (water = 1). 0.75 @ 15.5 C (60 F) Solubility in water (%): Not available. Coefficient of water\oil dist.: Not available. VOC: 5.77 lbs/gal (696.6 g/l) Chemical stability: Product is stable. Conditions of instability: None known. Hazardous polymerization: Will not occur. Section 10 : STABILITY AND REACTIVITY Incompatible substances: Strong acids. Strong oxidizing agents. Hazardous decomposition products: Carbon monoxide. Various hydrocarbons. Carbon dioxide. Section 11 : TOXICOLOGICAL INFORMATION LD50 of product, species & route: Not available for mixture, see the ingredients section. LC50 of product, species & route: Not available for mixture, see the ingredients section. Exposure limit of material: Not available for mixture, see the ingredients section. Sensitization to product: Cardiac sensitization may occur. Reproductive effects: Not available. TECH CHEMICAL VULCANIZING FLUID Page 5 of 7

Teratogenicity: Not available. Mutagenicity: None known. Synergistic materials: Not available. Environmental toxicity: No data at this time. Section 12 : ECOLOGICAL INFORMATION Environmental fate: No data at this time. Section 13 : DISPOSAL CONSIDERATIONS Waste disposal: In accordance with local and federal regulations. Unused product is RCRA ignitable (D001). Hazardous Waste Classification: D001 Section 14 : TRANSPORT INFORMATION DOT: ADHESIVES UN1133 Class 3 PG II. Labels required: Flammable liquid. Emergency response guidebook number: 128 EmS number: 3 05 Additional shipping information: 1 Qt(1L) containers may be shipped as a Consumer Commodity, (ORM D Domestic US). 1 Qt(1L) containers may be shipped as Limited Quantity of Dangerous Goods of Class 3. Special shipping information: See DOT, IATA and/or IMDG regulations before shipping any hazardous material. USA Regulatory Information SARA hazard catagories sections 311/312: Section 15 : REGULATORY INFORMATION Immediate (Acute) Health Hazard: Yes. Delayed (Chronic) Health Hazard: Yes. Fire Hazard: Yes. Sudden Release of Pressure: No. Reactive: No. SARA Section 313: These following substances are constituents of Light Aliphatic Naphtha. They are naturally present and have not been added as ingredients:. N Heptane (CAS# 142 82 5) 50 56%. N Ethylcyclohexylamine (CAS# 5459 93 8) < 1.0%. Cyclohexane (CAS# 110 82 7) < 1.5%. CERCLA reportable quantity: This material is covered by the CERCLA Petroleum Exclusion, therefore, releases to air, land or water are not reportable under EPA CERCLA ("SUPERFUND"). TSCA inventory: All ingredients are listed on the TSCA inventory. TECH CHEMICAL VULCANIZING FLUID Page 6 of 7

Section 16 : OTHER INFORMATION Data prepared by: Global Safety Management 3340 Peachtree Road, #1800 Atlanta, GA 30326 Phone: 877 683 7460 Fax: (877) 683 7462 See www.techtirerepairs.com for the latest MSDSs. Web: www.globalsafetynet.com Email: info@globalsafetynet.com. TECH CHEMICAL VULCANIZING FLUID Page 7 of 7